Related
I bought my HTC Diamond on UK. I updated the ROM to the RUU_Diamond_HTC_HK_WWE_1.93.831.1 this was supposed to make my phone QuadBand. It does work in USA (Boston) where I live. But I have never seen my phone doing 3G and speed test top was around the 1xx kbps.
Any Ideas?
PS. I am on the ATT network
Are you sure you have 3G coverage in Boston? Do you have a USIM-card (which I was told to be required for UMTS stuff)?
3G speed
I did look at the ATT coverage map and it said that I do have coverage.
How do I know what type of SIM I have? The SIM does have the 3G logo on it.
Are you sure your phone has the bands?
Check the Band setting, Settings->Phone->Band,
in the dropdown box for "Select your GSM/UMTS band", my US 3G ATT phone shows the following options:
Auto
UMTS(850+1900)+GSM(850+1900)
(oddly enough, the settings have to be on Auto for the phone to work..)
When I bought my diamond, I was curious about my sim too, so I took it into the ATT store and asked if it was the "latest 3G sim" and he said yes. Mine is half white (top) & half Blue (bottom), with a orange 3G fireball in the topright corner.
If yours matches all that, then take it to the ATT store and see if you get 3G in the store
Also..if you have doubts, I've had multiple Sales reps in the store tell me I can get a new Sim for free at any time, just need to ask.
3G
I do have that SIM half blue half white with the 3G fireball logo.
On my select network I have
Auto
GSM
WCDMA
on the GSM/UMTS band I have
Auto
UMTS(900+2100)+GSM(900+1800)
UMTS(850+1900)+GSM(850+1900)
UMTS(800+2100)
UMTS(850+2100)+GSM(900+1800)
UMTS(850)+GSM(900+1800)
UMTS(1700)
rpassmore
What ROM do you have?
RUU_Diamond_HTC_Europe_1.93.401.2
RUU_Diamond_HTC_Europe_1.93.401.2
Does this ROM supports USA 3G????
Sorry for my English
You have the European version and have only HSDPA 2100 / 900 (3G) and probably ATT works in HSDPA 850 / 1900, if this is the problem, sorry 3G is impossible for you, because is a hard problem, not a soft problem, search in this web there are many post about this. The European is quad band in GSM but not in HSDPA (3G)
CArlos
How about if I use another ROM
If I use another ROM ? would I be able to do 3G?
No I think it's impossible since it's different hardware I believe.
I think the one you have from UK, it only contained HSPA 2100 and US /Canada is using HSPA 850/1900, that's why you don't have the 3G signal.
Quad band only for voice and EDGE.
cmilian said:
rpassmore
What ROM do you have?
Click to expand...
Click to collapse
I'm using the stock rom/radio for the Unlocked US 3G.
1.93.422.4 WWE
1.00.25.08
But I missed the fact that you're using a European Diamond. sorry.
is there any conection betwen 3G and front camera....
i think i have an Eropean model from UK Vodafon which has the front camera... but i am not sure about 3G !
????
Hello experts,
Would you please tell me if I need a new modem (currently on T849UVJJB, assuming that's stock modem), or do I just need to carrier unlock my tmobile branded galaxy tab in order for me use pre-paid sim from other countries such as Hong Kong or Taiwan.
I have already rooted my galaxy tab and installed Overcome 3.0.0 on it. I am interested in voice + data, but all these different radios and talks of voice calling is disabled on the tmobile server's side (thus only network unlock is required to get voice +data) had me confused.
Greatly appreciate it if someone can clear it up, thanks.
To use any sim besides t-mobile, you need to unlock.
You will need to root your tab, then unlock it.
Since there is no compatable network in China the best you can get is voice and EDGE data.
Use a froyo modem.
Thanks rangercaptain for your reply.
As I mentioned I have overcome rom installed, thus I am already rooted. I also installed from the market galaxy_s_unlock, and it seems to be working (although I won't be able to find out until later when I travel.)
you mentioned it will only do EDGE, which I am dumbfounded:
-most Asia (including China) and Europe support UMTS 2100, known as Band I
-Tmobile galaxy tab spec page listed it supported both UMTS 2100 (Band I) and UMTS 1700 (AWS)
I am traveling soon so I guess I will report back. But if there is any actual report from users that would say one way or the other it would be awesome.
Thanks.
The word "and" is the key. The t-mobile tab has to have 1700 and 2100 bands to have 3g/H. Outside of US t-mobile service area, the 2100 band is available, but no 1700 band.
Go prepared for EDGE and be pleasantly surprised if you get 3g. It has worked out in a few places.
well, I am at Hong Kong right now, and here's what I found:
I am using hutchison 3G, JPE modem.
Yes I get voice. Data: GPRS works, EDGE works (though most of the time is G)
But whenever the icon indicate 3G (even with 4 bar) I get no data, at all.
Here the head scratcher: When 3G swtich over to the letter H, if it is above 3 bar I can get data! But I thought 3G and HSPA is on the same frequnecy and if it works for H it should work for 3G also.
That's because the bands for 2100 match, and the US 1700 band and the overseas 1900 band have a small overlap, so you occasionally hit the sweet spot.
Got an used Captivate on eBay, came with kernel 2.6.35.13 Glitch v13.1, MIUI 2.2.17, Android 2.3.7 and modem UGJK4
Well, Captivate radio specs for 3G: HSDPA 850 / 1900 / 2100
My operator (TIM) uses 2100 in my city, excellent until now!
But, I'm stuck in EDGE, can't get it to connect any faster. We have other phones here got from England, Ireland and USA, all of them support 2100 and 3G works perfectly, but not this Captivate.
Already tried the following modems: UGKG3, XXJTV, XXJVU and currently on UGJL2.
Just after installing the UGJL2, it connected at HSDPA, but after 5 seconds changed to Edge and no (H) anymore
A weird thing, I tried another operator chip (VIVO), that also operates at 2100 in my area and HSDPA is enabled normally!
Got back my chip and back to EDGE, this same chip get 3G+ (HSDPA) on a Samsung Jet, Samsung Galaxy Mini and a Samsung i550.
Everything else works perfectly, calls, GPS, wifi...
Any tips?
Thanks!
Surfin7 said:
Got an used Captivate on eBay, came with kernel 2.6.35.13 Glitch v13.1, MIUI 2.2.17, Android 2.3.7 and modem UGJK4
Well, Captivate radio specs for 3G: HSDPA 850 / 1900 / 2100
My operator (TIM) uses 2100 in my city, excellent until now!
But, I'm stuck in EDGE, can't get it to connect any faster. We have other phones here got from England, Ireland and USA, all of them support 2100 and 3G works perfectly, but not this Captivate.
Already tried the following modems: UGKG3, XXJTV, XXJVU and currently on UGJL2.
Just after installing the UGJL2, it connected at HSDPA, but after 5 seconds changed to Edge and no (H) anymore
A weird thing, I tried another operator chip (VIVO), that also operates at 2100 in my area and HSDPA is enabled normally!
Got back my chip and back to EDGE, this same chip get 3G+ (HSDPA) on a Samsung Jet, Samsung Galaxy Mini and a Samsung i550.
Everything else works perfectly, calls, GPS, wifi...
Any tips?
Thanks!
Click to expand...
Click to collapse
From what I know, the Captivate only gets 3G on AT&T even when unlocked. I might be wrong, but I remember reading that somewhere.
Must be a myth, I use my captivate on 850mhz in Australia 3g and hspa work perfect.
Did you try to force 2100 with service mode?
Phoned in.....
But with the other operator chip 3G works normally, at the same place where my chip also get 3G on other phone. Both are 3G+ (Hsdpa) able, but not when together. That is what makes no sense.
I would have forced in servide mode, but all the codes for service mode does not seem to work, and I've seen around the forums that MIUI don't have it...
Is there any code besides *#0011# and *#*#197328640#*#* ?
Both not work here
Thanks for the help!
MIUI and AOSP do not allow for the forcing of certain bands. You can specify what region you are in, but that's about all. To do that, use dialer code
*#*#4636#*#*
Phone setting
Menu/select service bands
That's about as good as it gets.
Hope it helps.
fractaline said:
Must be a myth, I use my captivate on 850mhz in Australia 3g and hspa work perfect.
Did you try to force 2100 with service mode?
Phoned in.....
Click to expand...
Click to collapse
Your carrier uses the same 3g bands that att does. Those are the only ones that use the same 3g bands
sent from my cell in Arkham
mrhaley30705 said:
MIUI and AOSP do not allow for the forcing of certain bands. You can specify what region you are in, but that's about all. To do that, use dialer code
*#*#4636#*#*
Phone setting
Menu/select service bands
That's about as good as it gets.
Hope it helps.
Click to expand...
Click to collapse
Yes, I've tried Automatic and Euro (same bands used here), still Edge.
The strange thing is it get 3G from the other operator, that uses the same 2100 frequency... (at leaset they say it's both 2100)
Any way to see the frequency currently in use?
zelendel said:
Your carrier uses the same 3g bands that att does. Those are the only ones that use the same 3g bands
sent from my cell in Arkham
Click to expand...
Click to collapse
My carrier uses 850 and 2100.
My wife has a captivate also, her carrier uses 900 and 2100. Of course only the 2100 works but it is solid.
Phoned in.....
Ok, I discovered that it's an area problem probably, I tried at the office and got the H on the indicator! HSPDA is working, sometimes 'came down' to 3G (concrete building, not so good signal).
That's still strange because my friend get Hspa here, with a Galaxy S (I9000b), same operator, will call them soon to ask about this.
Anyway, it works! with ridiculous speed (180kbps), but it's better then Edge at 15kbps...
Thanks everybody for the help!
[Q] ATT GTab on Tmobile Network - 3G Possible? (CM10, JPZ Modem & 1900 re-farm area)
So I have the ATT version of the Galaxy Tab. I have CM10 on it and it's running great. When I initially purchased it, I planned on just using it as a Wifi tablet, no Cell Data primarily since I had CDMA service (Sprint). Recently I switched over to Tmobile and would like to use data from my Tmobile plan.
I SIM unlocked my Tab following Roto's guide
I can make phone calls and send text messages
I get Edge service now
However, I could care less for Voice/Text service, all I want to do is use 3G/HSPA.
I also realize that Tmo's 3G band is different than ATT's, however the 1900 Mhz refarming is already happening in my area (Central Florida). I cannot however tell if my specific local area has coverage (is there an app I can run on my Note2 or GS3 to tell what bands it has access to?).
I am wondering if I can just flash a Tmobile modem and get data working on 3G/HSPA. I don't really think it's that simple, but any feedback would be great!
FWIW, I was on the JPZ modem before I started.
Well, I went ahead and flashed the Tmobile modem, got 0 service, then tried the ATT modem, got 0 service, then flashed back to the JPZ Modem... also didn't work.
Going to try to ODIN...
Well, apparently when I was jacking around with different modems something went haywire and it deleted my stuff from /efs, and the modems were never actually put into /radio. I restored my /efs backup (thank goodness for roto's suggestion to keep 11.5 years ), carrier unlocked again, then pushed the T-mobile modem to the radio folder. Thankfully I found the "Secret Codes" thread and when I went to check my IMEI it was blank, which then clued me to start looking in the /efs folder and then /radio.
Rebooted and I'm back to Edge service... and a noticeably lower number of reception bars. With the JPZ modem I saw 4/4 bars with Edge service while the Tmo modem changes between 0 & 1 bars.
I performed the *#*#2263#*#* (RF Band Selection) secret code and made sure only 850 Mhz GSM and 1900 WCDMA were enabled (since from what I understand that's the frequencies ATT had put into the Tab) and disabled the 1700 & 2100 WCDMA bands since the hardware isn't there.
/Thinking my area might not have 1900 refarming yet, I'm going to take it to work with me tomorrow and see if I see anything different.
Well, clearly switching modems is a bad idea. I tried the Tmo modem, both with specific bands selected and "all." Saw only 1 bar total, and only Edge service- not better than the JPZ modem. I switched to the ATT modem, selecting "all" bands, nothing at all. I finally switched back to the JPZ modem and bam, 4/4 bars- but still only Edge service.
Either the 1900 re-farm hasn't happened in the areas I'm testing, or I can't make this work...
phdeez said:
Well, clearly switching modems is a bad idea. I tried the Tmo modem, both with specific bands selected and "all." Saw only 1 bar total, and only Edge service- not better than the JPZ modem. I switched to the ATT modem, selecting "all" bands, nothing at all. I finally switched back to the JPZ modem and bam, 4/4 bars- but still only Edge service.
Either the 1900 re-farm hasn't happened in the areas I'm testing, or I can't make this work...
Click to expand...
Click to collapse
OK, I found the following dialer code:
*#*#197328640#*#*
Going to the Debug Screen -> Basic Info it shows the BAND which is GSM1900!
Now, how in the heck can I get this thing to connect to 3G???
Unless T-Mobile switches their umts/hspa to 850Mhz ( like your at&t) or 2100Mhz, I dont think you can get 3G using non T-Mobile tab.
The 1900 should be only the gsm part.
Sent from my GT-P1000 using xda app-developers app
Thanks for the response. I guess I was assuming my ATT Tab would have the same restrictions an ATT iPhone would (just Edge service until the 1900 Mhz refarm happened on Tmo from ATT spectrum). Also, I was working under the assumption that an ATT Tab would have the same requirements as a Tmo Tab (needing some sort of software switch to go from 2G <-> 3G), or possibly a different modem.
So, after reading some more in the Tmo forums about my Note 2 and realizing the Tmo network has 3G/HSPA on WCDMA. I messed around last night and switched my GTab to WCDMA 1900 (only) and low and behold my data popped up alternating between 3 and H. Tried a speed test and got over 5.8MB download/1.6MB download!
Frigging awesome!
Re: [Q] ATT GTab on Tmobile Network - 3G Possible? (CM10, JPZ Modem & 1900 re-farm ar
Maybe you can detail your steps here for the benefit of others.
Sent from my GT-P1000 using xda app-developers app
Edit: not sure if this is a switching problem or the way the phone is designed, but sort of figured it out...seems that the Exhibit 4G will auto fallback to UMTS when no HSDPA link is active. Just ran some speed tests and it did in fact hold HSDPA speeds, when done it fell back to UMTS. My GS3 doesn't do this...if I have 4G/ LTE available, it stays with it. Hence the confusion.
I recently purchased a new unlocked Exhibit 4G, have been testing the various roms here...many thanks to the devs...great work! Currently trying AOIP...nice!
My primary usage is on the TMO network, at my RV site on weekends. Unfortunately, 2G is the best I can get in my location, regardless of carrier.
I live in Canada the rest of the time, on Rogers with a GS3.
I was testing out the Exhibit 4G with my Rogers sim, LTE APN's were set up ok, voice & messaging are fine, but data is wonky...I will get the 'H' (aka 4G) icon for a few seconds at a time, but for some reason I keep falling back to 3G speeds. This cycle continues over and over. AFAIK, this phone should support Rogers HPSA+ frequencies (aside from their new 2600), shouldn't it?
So I'm wondering if this is due to an incompatibility with the phone on Rogers, or needing a different baseband, or could the phone's h/w be screwy? This has been happening with all roms I have tried (AOIP, Baked, Slim).
Appreciate any insight.