Database Develop

Phone hangs in sleep mode

Hello there,
I really am stumped, and would really like some help! I've searched the forums, can't really find what I'm after, so apologies if this as already been asked/answered.
Basically, my G1 hangs a lot when it goes to sleep. I'm running Cyanogen 4.0.4 with an 8Gb Class 6 card - everything was fine when I was using the stock 2Gb card that came with the phone, but after having loads of trouble trying to transfer my apps, I decided to just wipe and start again. The card is Ext2 parted with a 293Mb size partition. I did have it as Ext3, but thought this might be the problem (since I didn't have any problems with Ext2 on my old card), and wiped and repartitioned as Ext2 but that wasn't the case and problems persisted. Occasionally the phone will hang when it is on, but mostly the hanging happens when I leave it alone for a while; the screen stays dark and nothing happens, and I have to take the battery out and restart the whole phone.
One thing to note is that when I did reinstall everything, MybackupPro often didn't like the card, and gave me 'I/O problems with card' or 'Cannot install app' mesaages until I rebooted and started again each time the messages came up. I had to reinstall my apps in 10 - 20 app chunks in the end, rebooting when errors came up, but eventually I got everything reinstalled.
I'm running Swapper (I know Cyanogen does something similar natively, but wasn't sure how it worked...someone please correct me if I shouldn't be using it), and Overclock Widget. Like I said. I never had a single problem before with my old card and these apps, so this all leads me to think it may be the card, but any advice would be much appreciated!

markdjj said:
Hello there,
everything was fine when I was using the stock 2Gb card that came with the phone
MybackupPro often didn't like the card, and gave me 'I/O problems with card' or 'Cannot install app' mesaages until I rebooted and started again each time the messages came up.
I never had a single problem before with my old card and these apps, so this all leads me to think it may be the card, but any advice would be much appreciated!
Click to expand...
Click to collapse
Hmm... sounds like the card to me. And the fact that you are using swapper on a possible defective card may very well be causing your system to hang. The system is relying on the sdcard as part of it's memory. So if the cards fails at any point, so will your phone. It'll be like pulling the RAM module out of your computer while your using it. Include a logcat of the phone crashing if you can and post it. Also reformat and check the partition for errors.

Thanks for your advice, I thought it may be the card too. Partitions seems fine...I used Partition Manager and it didn't throw up any problems.
As for Logcat, I did try and do that, but got a bit stuck trying to fiddle with my computer, and I don't think it's going to happen. I'm a bit of a newbie I'm afraid.
I don't mind getting a new card, but the only thing I'm concerned about is moving my apps...on this post here http://forum.xda-developers.com/showthread.php?t=553469 it looked pretty easy, but could you tell me if these commands are to be executed in the terminal on the handset? Does it copy the apps, because I imagined that if you fiddled with stuff that's in use (like moving an app from the Ext2) would cause a lot of FCs and possibly even hangs.

odd hang
I myself am getting a bit of a hang when waking the phone up, i have to hit the menu button several times, kinda reminds me of the coma issue that we had back on the old kernal. i didn't have a problem till i clean out my phone by wiping and reformating my card, it is not that big off a deal but it is just strange. oh and to the op, you do not need to run openclocker since cyanogen's rom has cpu scaling that does it already and if you have your partions in order as fat,ext,swap than it will auto use compchace

gridlock32404 said:
I myself am getting a bit of a hang when waking the phone up, i have to hit the menu button several times, kinda reminds me of the coma issue that we had back on the old kernal. i didn't have a problem till i clean out my phone by wiping and reformating my card, it is not that big off a deal but it is just strange. oh and to the op, you do not need to run openclocker since cyanogen's rom has cpu scaling that does it already and if you have your partions in order as fat,ext,swap than it will auto use compchace
Click to expand...
Click to collapse
My phone did the exact same thing when I was using either Jac's Hero 1.3 or cyanogenmod 4.0.1. I tried everything and it wouldn't go away so I ended up switching to xrom.

Since cyan has been doing a lot of kernal tweaks lately do you think that it is possible that the coma issue has gotten reintroduce though, I mean both mine and the op is doing it, his is worse but if you remember that is what was happening to a lot before, mine never got to the point of pulling the battery but to the point of annoyance just like it used to

How is the xrom <that's jac's non hero build, right?> is it comparable to cyanogen's, I love cyan's performance but if this persits, I might find something else for awhile

I love it honestly. He just updated it to 1.4r3 and its is sweet, it has a custom theme and it looks really good. The performance is great and I don't even use a swap with it. I tried cyan again when 4.0.3 came out and only used it for 2 days before switching back to xrom. Personally I liked the icons and lockscreen of xrom 1.3r3 better then 1.4r3 but that is just my opinion, If you want to try 1.3r3 I can send it to you since it's not up anymore. Try 1.4r3 first though and see what you think because IMO it is the best rom out. Hero is nice but no matter what you get some lag and after a week or to it gets slower so I don't use it yet, I try the new builds but never stick with them.

Yeah I feel the same way but the hero builds too, nice to play with but nowhere near usable for me, I might just have to check out the xrom but I don't wanna give up loccy's browser, it is just friggin sweet and it works good for me because of the option of viewing just destop versions of sites since I get the men's health daily newsletter and whenever I would click on a link it would give me the moble version and not the article I would like to read, if loccy's brower works on the xrom, we might just have a winner

I haven't tried it yet so I'm not sure. Is it just a simple .apk to install or do I need to push it?

I just read the thread on the browser and it says it should work on xrom. It says to push it but I have just installed it like a normal apk before

Yea I am downloading it right now so I will let you know how it goes. Just so you know the browser on xrom doesn't have those zoom in/out buttons that pop up when you touch it, also it has multi touch just no double tap to zoom. I don't see any settings for turning off mobile pages though.

Well I am downloading the xrom right now so I will be flashing within the next half an hour or so, let me now if the browser works for you, by the way is compchache or swap automatic on it like cyan's or do I need to set it up myself, I perfer swapper, it just seems to work better for me

I think swapper is automatic but to be honest I never have used it for xrom because it is fast enough without it. The better browser works I just installed it normally, no pushing and I am using it right now with no problems, you have a pm.

If you like the notification bar icons in the first picture on the xrom thread they are from 1.3r3 because they changed in 1.4r3. If you want the older ones I can give you that rom amd it runs just as fast, only has a few differences from the newer one.

This xrom is nice, I am happy with the newest, oh and when I installed swapper and went in it was already set at 96mb and swappiness of 80 and I am on a fresh install and reformat so it must be automaticly set to then, explain why it is so smooth. Definitely comparable performance wise to cyanogen so I might have to stick with this for a while

I dont even have a linux-swap partition on my sd and I haven't had any problems with speed or lag.

Mine is silky smooth, better than I have had on any roms even the stock one

how to troubleshoot random freezes and restarts

Hi guys, I have had a G1 for over a year now, and it has been rooted for that long. I began using cyanogen's mods since 4.1 or so, and they have been rock solid until recently, when I upgraded from 4.2.6 to 4.2.7. Ever since that upgrade, my phone has been "freezing" and rebooting at seemingly random intervals.
First, let me try to define what I mean by freezing: this usually occurs when the phone is put to sleep, and it just refuses to wake up. The screen remains black, however my notification LEDs continue to flash (if they were flashing before). Sometimes, the phone freezes while I am using it; buttons stop responding, and opening/closing the keyboard does not change orientation. The phone usually gradually slows down to a crawl before this type of display-on freeze happens. In both cases, I am able to restart the phone by pressing call+end+menu buttons.
For the restarts: these started happening recently, I'll guess after 4.2.9. This always happen while I am using the phone. It'll pause for a second, like it's frozen, then restart back to the G1 boot screen a few seconds later.
I have tried wiping, repartitioning my SD card from scratch, using the phone without any of my apps installed, etc. The only thing that seems to fix this is if I downgrade back to 4.2.6. I have tried to narrow this down to the best of my ability, but I still cannot figure out the cause. My question is, how can I begin to troubleshoot this? Is there a log or some way for me to see what is the last thing the phone tried to do before it froze/rebooted? Right now, I don't even know where to begin.

well for the phone freezing it MIGHT be too many apps running in the background and eating up CPU usage...download advanced task killer from the market, it allows you to close apps that run in the background.
as for the random reboots, i am almost certain it has to do with the rom you are on. there should be an app called "log collecter" in your app tray, it comes with the rom, try and get the logcat from it when your phone reboots, and send that logcat to cyanogen via the link he provides on his thread.

2 things that I can think about:
1. Wipe you dalvik-cache
if that does not fix it
2. This may be a good time to re-format the ext 2/3/4 partition of your card and do a complete wipe.

I have this exact problem, it first started with random sd card errors "removed sd card" with an sd card inserted, and now the black screen of death, I reformatted and repartitioned my 8gb transcend class 6 card and flashed latest cyanogen. Today I got the black screen again so I used nandroid and went back to cyan 4.0.4, I still got the black screen freeze running old rom but so far sd card is working so not sure what the cause is, bad sd card? I just got this card a month ago... or phone going bad?

yeah, i get the freeze, its usually when i am running multiple resource eating apps. Try advanced task killer for a convenient notification bar click away from closing apps.
I also get the other problem where it wont wake up! Seems like we are running into the same problems under the same ROM. When it doesnt wake up i usually wait a few seconds and try pressing other buttons than the menu button to wake it up when its not turning on. A combination of waiting 5 seconds and trying a different button usually wakes it up.

Hey guys, thanks for the logcat info.
The most frustrating part about this problem is that it is unpredictable; it just happens when it feel like it and is impossible for me to reproduce, therefore I cannot figure out the cause nor can I tell whether or not any changes I make have any effect.
I do have ATK, and I use it regularly. It still doesn't stop this from happening. In fact, I installed ATK in order to try to solve this, which means before this started occuring, I did not even have ATK installed nor did I have this problem.
Can anyone tell if there were any significant changes from cyanogens 4.2.6 to 4.2.7? I see the changelogs, but most of it doesn't really mean anything to me because I don't understand what its talking about.

Yeah I usually get the freeze after installing a new rom onto my htc dream 32a. I just take out the battery and put it back in. Then I reboot and have no problems after that.

try going back to previous rom you had and see if the problem still exists... could possibly be an issue with latest update for rom...

Nook will turn on by it self after 5 minutes or so

First I thought that I'm crazy but now I can confirm that my NC will boot on it's own after about 5 minutes after power OFF. I have to shut down 2nd time and than it will stay OFF. Any idea what's wrong ?
Thanks
(Yes I did confirm after first shut down that it's actually OFF since no buttons will respond)

Any weather Apps running? Many of them have an option to wakeup in order to update. Check your mail, twitter and facebook apps. It has to be something you installed, I have run every update, tried all the froyo images and both Honeycomb releases and I have not seen that.

To expand on what gedster wrote, it seems kind of crazy and out there but what about any devices on your network that might send Wake on Lan requests? What if something on your network had located your NOOKcolor. I don't even know why a eReader Tablet would have a function for Wake on Lan but it's just another crazy avenue to jog down.

I do have weather app installed but I find it hard to believe that it can wake up OS that is not in standby but completely off. WIFI is also not enabled before shutdown.

Looks like the problem is there only if I used market, if market is not used it will shut down fine and it will not boot on its own.

lifeisfun said:
Looks like the problem is there only if I used market, if market is not used it will shut down fine and it will not boot on its own.
Click to expand...
Click to collapse
Seems that's unlikely if you're the only one having the issue, I'd keep digging if I were you.

Looks like you're right I can't replicate the problem every time
The timing when it will boot also varies 5, 15 and even 35 minutes.
Don't know what to do, it's hard to imagine how it can boot on it's own from
complete power off state

I can't believe I'm the only one with this problem

lifeisfun said:
I can't believe I'm the only one with this problem
Click to expand...
Click to collapse
I just posted a thread about this issue for me less than an hour ago! Funny, no one replied to mine: http://forum.xda-developers.com/showthread.php?t=940713. It was pretty long...guess I should've added a TL;DR.
It happens to me on any (or no) power source. Timing varies like yours as well. I'm going to pull my weather app based on the above recommendation, and I will try your Market theory out. Knowing someone else has this issue makes me hopeful that we can find something that we have in common as the culprit.
I did download the newest Honeycomb image yesterday and I'm going to put that SD card in and see if I can get it to turn itself back on on a Market-less, user App-less build. If successful I'll Titanium my 1.1 apps and remove everything non-system, then slowly add until I get this figured out. Keep me posted if you figure something out, I'll be sure to do the same!
In case it matters I bought mine about a week ago and the serial number starts with 20046.
EDIT: Testing with Honeycomb SD now so if that's the case here it should just stay off. I booted into Honeycomb at 9CST and turned it off at 9:01. I'll give it a couple of hours.

I used to have this same problem. I would randomly find my 1.0.1 auto-nootered 950mhz rom nook on, when I knew I had turned it off. interesting part is, this problem completely solved itself after I flashed my emmc with the custom nookie 5.9 img. so it must be an eclair issue and not a hardware issue

woot1524 said:
I used to have this same problem. I would randomly find my 1.0.1 auto-nootered 950mhz rom nook on, when I knew I had turned it off. interesting part is, this problem completely solved itself after I flashed my emmc with the custom nookie 5.9 img. so it must be an eclair issue and not a hardware issue
Click to expand...
Click to collapse
Really? I've been putting that off because I don't like the idea of not having Clockwork Recovery. I understand there are ways to do the same things using IOMonster's things but I'd really rather just have Clockwork Recovery working. Unless there's a way to get it going that I missed?

Yup, I've been having this issue as well. I really want to flash NF but I want hardware video acceleration.

oscillot said:
Really? I've been putting that off because I don't like the idea of not having Clockwork Recovery. I understand there are ways to do the same things using IOMonster's things but I'd really rather just have Clockwork Recovery working. Unless there's a way to get it going that I missed?
Click to expand...
Click to collapse
you are correct that clockwork does not work with froyo. however the bootable sd card that you would burn automatically starts up clockwork first. you can run a backup and restore, as far as i know, without having to reflash froyo. on a personal note, froyo still has some issues but overall I'm exteremly pleased so far. i really just wanted to get rid of all of the b&n stuff (mainly the status bar) along with any possible way of them pushing an update to break root. I would recommend it, but CM 7 with gingerbread will probably be out sooner rather than later.

woot1524 said:
you are correct that clockwork does not work with froyo. however the bootable sd card that you would burn automatically starts up clockwork first. you can run a backup and restore, as far as i know, without having to reflash froyo. on a personal note, froyo still has some issues but overall I'm exteremly pleased so far. i really just wanted to get rid of all of the b&n stuff (mainly the status bar) along with any possible way of them pushing an update to break root. I would recommend it, but CM 7 with gingerbread will probably be out sooner rather than later.
Click to expand...
Click to collapse
Which I guess brings us back to, why is Eclair doing this, and why does it seem to be limited to lifeisfun and myself?

I'm glad I'm no longer special
My serial # is 200503 .....
Removing all application that I have installed didn't help.
Only 100% way to shut down is to let it boot and immediately shut down.

unknown.soul said:
Yup, I've been having this issue as well. I really want to flash NF but I want hardware video acceleration.
Click to expand...
Click to collapse
Now that I understand the power of this things SD slot and that CWR can be run off of an SD, I can totally live with that. Hardware Video isn't a must for me yet, so I may take the plunge tonight after work...BTW, what are people's favorite video apps? I have been playing with VLC stream and convert, which works somewhat with my media server's samba shares. I have the share mounted to a directory on the sdcard since many apps look there exclusively.
More on topic, I couldn't get SD Honeycomb to start itself on its own. I tried booting then shutting down. 2 hrs of nothing 15mins light activity then shutting down. 2 more hours of nothing. About an hour of heavy use, seeing what could be installed, sideloading, testing, editing things like build.prop and rebooting often and trying to get swype working (don't think it's supposed to, but that's "heavy use" for me.) Powered down. Went to bed. Still not on this morning. This looks indeed to be an issue with the B&N stock Eclair.

Mine doesn't turn itself on with no interaction at all, but will turn on every time when you plug in the charger or cable hooked to USB port in computer.
I can turn it off once it is already plugged in and it will stay off, but remove and replug the charger and it is on again.
Strange.

Well, strange that only two or three of us noticed this strange problem.

Yeah, started for me after 1.1 update. Turned it off last night, tonight it was on with 40% battery! I think its 1.1 related, this didn't happen with 1.0.1 ...

I'm sure there's a condition that's causing or exasperating this issue, something common to us all. But at this point since I don't use the Nook as a video player (I actually bought it to read books, but I use Aldiko and the open epub format) I will likely flash Nookie to the eMMC and call it a day. Honestly can't wait to get a clean notification bar on this thing anyway.

[Q] Captivate loop soft reboot???

I am a broadcast engineer and have been a Linux user for the last decade. So when Android hit it was only a matter of whose device. After a lot of research and waiting for 6 months for the initial “teething pains” to pass selected the Captivate for several reasons.
As a broadcast engineer 24/7 reliable cellular communication with data is a professional necessity not a convenience. For that reason my wife always has the same phone as I carry as a backup. If mine gets broken or unusable for any reason we switch SIMs and I am back to work. So we both received our initial “trade up” Captivates at the same time. About 25 days after receiving our phones mine started randomly shutting itself off. After three warranty replacements finally got one that stayed on. Six months later wife's was replaced due to no audio from the speaker. Later after my father past my mother merged into our family plan and choose Captivate as well.
So we have three Captivates in our family. Love the phones. Mine by my nature is loaded with “all the bells & whistles.” Lots of app, widgets and rooted. As soon as I am comfortable with my choice and feel prepared will take the plunge and try flash a custom ROM. More than likely several through ROM manager of some kind. I really like to looks of the four tap lock and other features only a custom ROM is going to get you. Besides I am a “power user,” which my wife thinks translates to “if it works, it doesn't have enough features.” My wife has a few widgets & apps as well as my mother to a lesser degree.
In the last 90 days we all three have been experiencing something that I describe as a “loop soft rebooting.” Started with my wife, she described it a “loop rebooting.” Every weekday from 10:00 to 10:20. Once I had a chance to observe I found it does not do a complete reboot. It does not show the shut down animation like a controlled shut down. Or the turn on animation like a power up after a complete shut down or OS crash. I would describe it as more like a “soft boot.” Almost like a launcher crash, but it also has to rescan the SD media. It vibrates once with the screen off or on, in use or out. then twice more, another 8 to 10 seconds another vibrator alert then the launcher appears and starts to load widgets, apps & scan media. Completely unresponsive to any key input until after the launcher reopens. The wife has never used anything but the AT&T/Samsung stock launcher. I did all the usual things. Backup, factory reset, restore. Still does it. Backup, Hard reset, restore, still doing it. Hard reset, rebuild from scratch, no restore, stayed completely vanilla, no apps or widgets at all. It still does it. Then mine started doing it. I was using ADW Launcher, switched to Launcher Pro, have even dropped down to using the original launcher since it acts like a launcher crash. No affect. Went through all the above same process with the same results. Mine does it's act between 5:00 & 5:20. About a week later my mother reported hers does the same thing between 4:00 & 4:20. Interesting side note, if we turn off the radio (airplane mode) it does NOT do it, completely stable in PDA mode. But when we turn the phone back on, it then starts the process and runs for 20 minutes and stops. I have been collecting logs off my wife and my own phone but work duties have not given me the opportunity to read through the thousands of lines of logs to find a “smoking gun.” Now in the last week we see the same activity more often and for longer periods. Because turning off the radio stops the activity there has to be a trigger from the network. It also uses lots of data during these periods. Maxed out my wife's data plan the last 3 months. We have Lookout Security installed on all three phones and it reports no Trojan's, viruses etc... Also the Hard reset should have killed anything like that. I have done hard resets three time on my wife and my own phone and rebuild from scratch now. We have left her phone completely factory fresh only adding back her contacts through Gmail. I have Titanium Backup and have tried “freezing” & unfreezing” everything I can think of. Nothing but turning off the radio seems to effect this issue.
Has anybody out there experienced anything like this???

Damn dude, can I get the cliff notes?

If you're thinking of taking the custom rom plunge, I would say to go for it. The reason I suggest this is that most custom roms will also flash a different modem, which might allow your phone to connect to the towers in a way that will prevent the hot reboots you're seeing. Just make sure to do the normal backups (Titanium backup) of stuff you want to save before flashing.

^ +1
sound74145,
yeah since ur rooted, i would suggest flashing a different modem (radio) if u don't want to flash a Dev Rom yet.
What is ur Baseband version now... i897uckb1 ?? If so try i897ucKH3.
Check the modem stickied thread. It should be attached behind the paperclip at the title of the thread.
Sent from my SAMSUNG-SGH-I897 using xda premium

hysterical

[Q] Streak 7 keeps powering off and rebooting (even at full charge and after reset)

Hello
I've got a used Streak 7 with the official Dell Honeycomb update. I made a master reset while driving home, then connected it to my WIFI network and worked very well! until it suddenly rebooted while browsing the web. After turning it on again and using the youtube app, the same thing happened even at full charge with the cable still plugged. Annoyed as hell, did another master reset... seemed to work well but after an hour it rebooted again... and does it every 10 minutes or so.
I am pretty sure it is software related because seconds before each reboot, the screen goes black and I am able to read: "Android System" with a weird icon on the top left corner... then It displays the Power Off/Shutting Down dialog (like when you power it off the right way pressing the power button) but then instead of pwering off it reboots itself.
I have noticed that if I leave it alone without opening any applications, it stays on. So far I have done 6 master resets and the issue is still there.
Any help please!!?

anyone?

I'm no expert on this but it seems about all you can do is to NVflash some other ROM since that will wipe your internal memory and repartition it. Then go back to HC again. If you have anything important on your device, back it up somehow as all data will be erased. There are lots of Guides and How To's here, some are good but some aren't! You'll have to read, read and reread till you go blind.

domenicostorino said:
Hello
I've got a used Streak 7 with the official Dell Honeycomb update. I made a master reset while driving home, then connected it to my WIFI network and worked very well! until it suddenly rebooted while browsing the web. After turning it on again and using the youtube app, the same thing happened even at full charge with the cable still plugged. Annoyed as hell, did another master reset... seemed to work well but after an hour it rebooted again... and does it every 10 minutes or so.
I am pretty sure it is software related because seconds before each reboot, the screen goes black and I am able to read: "Android System" with a weird icon on the top left corner... then It displays the Power Off/Shutting Down dialog (like when you power it off the right way pressing the power button) but then instead of pwering off it reboots itself.
I have noticed that if I leave it alone without opening any applications, it stays on. So far I have done 6 master resets and the issue is still there.
Any help please!!?
Click to expand...
Click to collapse
Though you are running Dell's official rom, I'm not sure which rom it is. Anyway, I suggest you follow the instructions here and update it to the newest 514 rom. This will wipe your ds7 and give you a clean start.
http://streakblog.blogspot.com/2012/01/new-patch-to-fix-docking-bug.html

domenicostorino said:
Hello
I've got a used Streak 7 with the official Dell Honeycomb update. I made a master reset while driving home, then connected it to my WIFI network and worked very well! until it suddenly rebooted while browsing the web. After turning it on again and using the youtube app, the same thing happened even at full charge with the cable still plugged. Annoyed as hell, did another master reset... seemed to work well but after an hour it rebooted again... and does it every 10 minutes or so.
I am pretty sure it is software related because seconds before each reboot, the screen goes black and I am able to read: "Android System" with a weird icon on the top left corner... then It displays the Power Off/Shutting Down dialog (like when you power it off the right way pressing the power button) but then instead of pwering off it reboots itself.
I have noticed that if I leave it alone without opening any applications, it stays on. So far I have done 6 master resets and the issue is still there.
Any help please!!?
Click to expand...
Click to collapse
I'm gonna go out on a limb here and say it's a known bug that hasn't been been able to be repaired and/or addressed. The only version that didn't have this problem was the stock Froyo and DJSteve's custom Froyo builds.
The Honeycomb builds, even the stock ones on my Streak did the same thing, and once in a while the ICS beta I'm currently using will randomly reboot if I'm using the browser.
NOW if I remember correctly, DJ Steve's Honeycomb builds R2 through R6 weren't plagued with this that I can remember. I used them all and don't recall random reboots of any kind.
Hope this helps. I know it's frustrating and I used to pull my hair out thinking it was something I installed. It may be my Streak, but down here in Costa Rica there are a group of about 20 of us that have one and I service them all and they were all plagued with the random reboots in the Honeycomb builds

cdzo72 said:
I'm gonna go out on a limb here and say it's a known bug that hasn't been been able to be repaired and/or addressed. The only version that didn't have this problem was the stock Froyo and DJSteve's custom Froyo builds.
The Honeycomb builds, even the stock ones on my Streak did the same thing, and once in a while the ICS beta I'm currently using will randomly reboot if I'm using the browser.
NOW if I remember correctly, DJ Steve's Honeycomb builds R2 through R6 weren't plagued with this that I can remember. I used them all and don't recall random reboots of any kind.
Hope this helps. I know it's frustrating and I used to pull my hair out thinking it was something I installed. It may be my Streak, but down here in Costa Rica there are a group of about 20 of us that have one and I service them all and they were all plagued with the random reboots in the Honeycomb builds
Click to expand...
Click to collapse
I am running stock 514 rom and found it to be less prone to the reboot. Before this update my ds7 would reboot at least 2-3 times a week. Now it would be 2-3 times a month. I noticed that some apps do trigger the reboot, specially poor written apps and non-honeycomb apps. So don't go installling every apps under the sun.
But back to the OP problem, you seem to have an excessive amount of reboot. I would update to the 514 rom first because it is simple and easily done before you nvflash to other roms.

After upgrading to 514, I cant say I've ever gotten a reboot on it since it came out.
Had a fair amount of them on 506 though.
Cant speak for HS as I dont use them.

TheManii said:
After upgrading to 514, I cant say I've ever gotten a reboot on it since it came out.
Had a fair amount of them on 506 though.
Cant speak for HS as I dont use them.
Click to expand...
Click to collapse
I wish I had your luck... On all HC roms... Stock or Steven's I had reboots so bad that my 7 was almost unusable... Not much without root but after root it got real bad... I even quit using it for a while... But mine is the 4G version so that may have had something to do with the instability
SGS II I9100 from TapaTalk

ok, this sucks
thanks... I have been playing with it for more than a week and I've discovered that if I tap on the back of it lightly, it immediately reboots!
The reboot also occurs if I hold it horizontally twisting it a bit (being gentle of course).
So, even if it seems like a software issue (because it reboots instead of suddenly loosing power completely)... it is actually a hardware issue.
I've been reading a lot regarding this problem and learned this also happens on the Dell Streak 5. Some users say that when Android detects an unstable voltage it auto reboots... and the problem with those ds5 is the battery not sitting completely still and it can be solved just by putting a piece of paper under the battery, great for them with a detachable battery! but not for us with a sealed system.
Do any of you have a service manual? I am willing to take it apart to try to solve this problem. My streak is unusable.

domenicostorino said:
thanks... I have been playing with it for more than a week and I've discovered that if I tap on the back of it lightly, it immediately reboots!
The reboot also occurs if I hold it horizontally twisting it a bit (being gentle of course).
So, even if it seems like a software issue (because it reboots instead of suddenly loosing power completely)... it is actually a hardware issue.
I've been reading a lot regarding this problem and learned this also happens on the Dell Streak 5. Some users say that when Android detects an unstable voltage it auto reboots... and the problem with those ds5 is the battery not sitting completely still and it can be solved just by putting a piece of paper under the battery, great for them with a detachable battery! but not for us with a sealed system.
Do any of you have a service manual? I am willing to take it apart to try to solve this problem. My streak is unusable.
Click to expand...
Click to collapse
Our friend TheManii wrote a thread on how to take apart the ds7. Link below.
http://forum.xda-developers.com/showthread.php?t=1441139

Oh wow this sucks... I mean cool guide but it is so extremely difficult to take it apart without damaging it! It is basically being held together with glue :S