Related
i cant find a good way to convert my avi files to play on windows media or find a program that will play my avi's is there like a codec for windows media?
sry for the noobieness
TCPMP is probably the best player and includes the DIVX codec.
It's also free!!
You can download it at:-
http://tcpmp.en.softonic.com/pocket
Tcpmp Is The Solution
The only video player I ever use is tcpmp. It has all of the features of a desktop player including full screen, equalizer with preamp, and I havent found a video file yet that there wasn't a codec for.
http://picard.exceed.hu/tcpmp/0.71/
well it plays the file but the video lags horibly the audios all right though when ever i try to lower the video quality on the program it crashes
fb.knight said:
well it plays the file but the video lags horibly the audios all right though when ever i try to lower the video quality on the program it crashes
Click to expand...
Click to collapse
Download PocketDivxEncoder and reencode.
Hi everyone.
I know, bad video performance is a known issue (see http://www.htcclassaction.org/).
But on my device I'm not able to play any video file without bucking image. About every second, the image stops for a short instance (I get sick watching this for more than a minute )
I tried different video files with different formats:
- wmv8 with 300 kbp/s, 25 images/s, 320 x 240 with wma8 128 kbit/s stereo (converted using All-in-1 mobile video convert)
- mpeg-4 (H.264)/AVC, between 128 and 1248 kbp/s 25 images/s, 320 x 240 and 64 to 128 kbp/s for stereo audio (converted with SUPER)
- a couple other files found on the web
I tried to play them with the installed Microsoft Media Player. Normally sound is ok, video never is. For the video it seems to make almost no difference what settings I use. mpeg-4 is a bit better than wma8. But between the 1248 kbp/s and the 128 kbp/s video there is no difference (besides th artifacts), It's bucking the same.
Can anyone please tell me, what codec / settings are playable on the HTC S730? Or can someone post an example video file that plays well on his device?
Any help is appreciated!
Window's media player is your problem in this case.
I have Core player and that TCPMP one posted above. If I drop resolution on some of my files I can play them perfectly in core player, and with TCPMP set to low (medium) all videos play fine. High action scenes sometimes cause a little studder so I am going to lower the origional res down a little bit.
The only problem I have run into is on some higher quality ones the phone runs out of page file memory which I currently have set to 1024 within TCPMP. Make sure your phone's memory is clear when trying to watch stuff and you should be just fine. Especially if you are dropping the resolution down that low.
I will try to take a short video of a video playing
Works!
It works! The problem really was windows media player!
Thanks a lot for the hint - I think I'd never try to change the player...
Frame rate is not perfect yet. I still have to figure out what the best settings are, but it is already ways better than before.
Hehe, no problem. WMP is not a well optimized player. For my computer and HTPC I use zoom player, it can handle 720p on a processor that really shouldnt be able to.
Video settings
Hi all.
After spending a lot of my spare time I finally found the right settings for converting videos for the HTC S730.
First I tried to convert videos to H.264/AVC and WM8. This does not produce anything you'd like to look at. Even with very low video bandwidth (200 kbit/s for video) the best I got was below 10 frames/s. With TCPMP it's a bit better than with Windows Media Player but there is no big difference.
But if works fine with the following settings:
Container : AVI
Video Codec: MPEG-4 480 kbit/s
Audio Codec: mp3 44.1 kHz stereo 128 kbit/s
For converting I use the free SUPER (http://www.erightsoft.com/SUPER.html).
This way I get close to 25 frames/s (maybe 10% are dropped).
Please note that such a video cannot be played with the Windows Media Player. (AVI is a Microsoft format, but it looks as the player doesn't like the codec.) However it plays fine on TCPMP 0.71 (from here: http://picard.exceed.hu/tcpmp/)
My daily train rides are much more pleasant now
Luki2 said:
Hi all.
After spending a lot of my spare time I finally found the right settings for converting videos for the HTC S730.
First I tried to convert videos to H.264/AVC and WM8. This does not produce anything you'd like to look at. Even with very low video bandwidth (200 kbit/s for video) the best I got was below 10 frames/s. With TCPMP it's a bit better than with Windows Media Player but there is no big difference.
But if works fine with the following settings:
Container : AVI
Video Codec: MPEG-4 480 kbit/s
Audio Codec: mp3 44.1 kHz stereo 128 kbit/s
For converting I use the free SUPER (http://www.erightsoft.com/SUPER.html).
This way I get close to 25 frames/s (maybe 10% are dropped).
Please note that such a video cannot be played with the Windows Media Player. (AVI is a Microsoft format, but it looks as the player doesn't like the codec.) However it plays fine on TCPMP 0.71 (from here: http://picard.exceed.hu/tcpmp/)
My daily train rides are much more pleasant now
Click to expand...
Click to collapse
With my S710 (has a 200MHz TI OMAP850) I'm streaming 25fps/200kbs of my VLC server (which transcodes digital sat streams in real time). I'm using .ts container, mpeg1 vid, mp2 audio and Coreplayer as client.
I have an episode of Top Gear that I can play in TCMP at mediuam quality, its video rate is 199 / 25 fps.
WMP will only play the non tweeked files, in other words if it was compressed into any codec (xvid, divx, ogg, mkv) and other of the others WMP will not play it unless it has the codec installed. The other players (core player / TCMP) come able to read these files upon install so they work better.
With TCMP most of my files do not even have to be changed, just dump them on the sd card and with the player set to medium quality it goes right through them. Now some high action / motion scenes will cause a little lag or slow down but not much and not for long.
This is soooo ridiculous! WMP worked just fine in the older 200mhz devices! Now we have to switch to TCMP and make sure that no programs reside in memory before playing ANY videos? Ridiculous! HTC is losing a lot of faithful customers with this.
It depends on the type of file's your trying to play.
Just like WMP on the PC, it wont play anything without the codecs for them.
So I've taken a lot of videos of my tilt, but I can't get them to play on my PC. They're in .mp4 format but they won't play in WMP, iTunes, QuickTime, or GOM Player. Anyone know a program that can handle these or what I can do to perhaps change the format the phone outputs them?
VLC should work.
After I move the video files from my tilt to my computer, I just rename the file from mp4 to 3gp, example: "video1.mp4" to "video1.3gp". It plays fine in quicktime after that. It gives me a warning that changing the file extension might make the file unreadable or something, but I haven't had a problem yet.
VLC (the aggressive player) will play anything you want, just get the right edition for you.
Click Here to Download VLC
VLC won't work. It plays the audio but the screen is blank. =/
That's odd, my copy of VLC plays the Video but not the audio....
You can upload them to youtube and myspace and they will play fine there...lol
Spartan2x said:
That's odd, my copy of VLC plays the Video but not the audio....
Click to expand...
Click to collapse
same here, except WMP plays the audio and video fine for me, but then when i try and exit it crashes lol
dude wtf...why cant it just output normal video
Hello,
I have the same issue. I could not have VLC read the movies correctly.
I now use Mirksoft Mobile 3GP converter to transform my videos into avi format (with correct output on VLC).
It can be found here : http://www.miksoft.net/
Hope this helps
there is a quicktime codec for vlc, with this you have sound and video
if you want them to play in WMP, you need a 3ivx codec.
http://www.3ivx.com/codec/download_win.php?format=exe
It's a trial, but it DOES work.
try this one Gom Player http://www.gomlab.com/eng/ it downlads codecs if you dont have them it should read any video.
boss1234 said:
After I move the video files from my tilt to my computer, I just rename the file from mp4 to 3gp, example: "video1.mp4" to "video1.3gp". It plays fine in quicktime after that. It gives me a warning that changing the file extension might make the file unreadable or something, but I haven't had a problem yet.
Click to expand...
Click to collapse
I tried this and it worked just fine! Just changed the file extension to .3gp and it play perfectly in quicktime, good audio/video.
I transferred several MP4 videos I shot with my G2 onto the rooted NC but they can't be played.
I'm guessing that because the NC doesn't have a camera, it's GPU may not have the hardware codec necessary to play the MP4 files.
Has anyone else had any success playing various video formats?
I had some success using rock player. I was able to load a 1024x576 mp4 video on the nc and play it in rock player. It wasn't silky smooth, but perfectly acceptable for watching. I used handbrake to rip it. I can post more details and maybe upload a sample if you'd like.
johnnyb138 said:
I had some success using rock player. I was able to load a 1024x576 mp4 video on the nc and play it in rock player. It wasn't silky smooth, but perfectly acceptable for watching. I used handbrake to rip it. I can post more details and maybe upload a sample if you'd like.
Click to expand...
Click to collapse
Yes, please.
Looking at bn.com it looks as though playing mp4 videos should be working out of the box...
I would appreciate a sample video and your HB settings so I can transcode some content of my own to carry around.
Thanks!
I wans't able to get the video to play with the B&N player as advertised, but that may have been because of my handbrake settings, which as promised are as follows:
Container: MP4 File
Picture: Anamorphic Loose, Width 1024 (to fit the nook)
Video Filters: All Off (shouldn't matter for playback, only for how good of quality the transfer is)
Video Codec: MPEG-4 (FFMpeg)
Framerate: 29.97
Average Bitrate: 997kbps
Audio: AAC (faac), Bitrate: 160
I have a 3MB sample here.
NC default player doesn't support video width above I think 854. You can find the exact specs in the FAQ on BN support.
Audio needs to be aac rather than mp3. To make a long story short, mp4 and m4v aren't video formats. They're containers for a video stream plus an audio stream, and there are a wide variety of video and audio stream types that can go in this container. NC default player doesn't support all of them, but the ones it does handle I've found it handles better than RockPlayer.
Sent from my LogicPD Zoom2 using XDA App
Anyone try Vplayer, works on my epic. Will test it on my NC tomorrow!
Sent from an Epic 3G on SERO.
Hi!
I have been struggling with this topic for a few days now. Read most of the threads written here on this too. I know about the limitation of hardware accelleration, and understand it. I have created presets for Mediacoder (+CUDA) perfectly working so that I can quickly convert what I want to a video format being very well played by on nook with hw accelleration.
I am aware of the fact that videos encoded with xvid/divx can only be played with software decoders. It's been reported here such videos are pretty well handled by players like Rock-,Mobo-,YXplayer and so on; I assume nook's CPU has enough power not to have issues with ~620x350 XVid encoded video. Well, mine seems to have one.
I tried out a couple of different .avi's I have. Just one specific example:
an episode of some TV show:
Video: 310 MB, 1037 Kbps, 25.0 fps, 624*352 (16:9), XVID = XVID Mpeg-4
Audio: 38 MB, 130 Kbps, 48000 Hz, 2 channels, 0x55 = MPEG Layer-3
This one is being played fine even on my old PPC Axim 30 (Intel XScale PXA270 at 624MHzwith TCPMP), but with no means on the nook. Test results:
- RockPlayer -> slide show
- YXPlayer -> slide show
- YXPlayer Neon -> slide show
- MoboPlayer - almost the one. The only one which plays completely flawless video, but the sound is out of sync, about 1 sec behind the video
What am I missing/doing wrong? Such a file should be a walk in the park for a Cortex A8 at 800MHz, shoudlnt' it? Is it about me using a rooted stock nook? Would froyo did the trick?
Regards,
Maciej
So you're on stock? Have you overclocked your setup? If so do you have governor set to Interactive and the Min. Cpu set to atleast 800mhz?
Matchay said:
25.0 fps
Click to expand...
Click to collapse
Found your problem. I find that the nook can only do 24fps or 29.999999fps. You must be trying to play a European program. Re-encode in Handbrake and change the "Framerate" drop down box to the NTSC Video setting.
While you are at it, in Handbrake and all, you might as well re-encode using x264 to take advantage of the Nook's hardware decoding...
poofyhairguy said:
Found your problem. I find that the nook can only do 24fps or 29.999999fps.
Click to expand...
Click to collapse
Generally? Or in terms of software divx/xvid playback? I re-encoded the file to H.264 WITHOUT changing the framerate and it works smoothly. For the hardware accel the framerate is not an issue.
I wonder what the problem could be: the sound isn't stuttering, the video is smooth, they are simply not synchronized. It cant be due to lack of power,can it?
Regards,
Maciej
The NC supports hardware decoding of MPEG4 (i.e. Divx/Xvid) Simple Profile but it has to be in a MP4 rather than AVI container. Unfortunately MP3 audio is incompatible with MP4 containers so the typical AVI needs to have at least the audio re-encoded for hardware playback on the NC.
It's not unusual to have poorly muxed AVI files where the audio and video end up out of sync when re-encoded. I'm not sure about Mediacoder but Handbrake does not easily allow adjusting the audio offset to compensate for that. You might try aviDemux (open source) as it does allow adjustment of audio offset. Unfortunately, it's trial and error to figure out the proper offset. If your Divx file is MPEG4 SP then you could just set up aviDemux to copy the video, re-encode the audio to AAC and mux in an MP4 container with the appropriate audio offset.
Matchay said:
Generally? Or in terms of software divx/xvid playback?
Click to expand...
Click to collapse
For me just software divx playback. My 25 fps files just never play well.
For x264 you can do any framerate up to 39 fps I think, as long as the bitrate is low enough. For me in Handbrake the magic number is a Constant quality of 22
@razmajazz
Sorry for the confusion. I have no issues with any x264 re-encoded file, as mentioned in my first post - my Mediacoder preset does its job perfectly.
I mean MoboPlayer plays the original Xvid video and audio very smoothly, they are simply out of sync, which doesn't look like a CPU power issue to me. As poofyhairguy said, it must be about the framerate and some incompability.
Re-encoding doesn't bother me, I only wanted to avoid it if possible for lower quality divx/xvid films. And the MoboPlayer seemed to be only an inch far away from the right solution.
I will do some testing in the afternoon.
Thanks,
Maciej
Are You playing videos on stock, rooted Nooks?
Or Froyo/CM7?
rooted stock
Try summer player, I tried many movies with that player and all seem to work well
Sent from my HTC Glacier using XDA App
angel7000 said:
Try summer player
Click to expand...
Click to collapse
Interestingly, Summer player plays all my files in fast forward mode
DSP drivers/Hardware video decoding is critical for smooth playback.
I dont know why the CPU cannot do it fast enough. (software decoding)
Thats why I'm on nookie froyo
No sync issues or anything with normal res videos from the interweb, no recoding needed, any decent MPEG4 player plays smooth.
Matchay said:
@razmajazz
Sorry for the confusion. I have no issues with any x264 re-encoded file, as mentioned in my first post - my Mediacoder preset does its job perfectly.
I mean MoboPlayer plays the original Xvid video and audio very smoothly, they are simply out of sync, which doesn't look like a CPU power issue to me.
Click to expand...
Click to collapse
Indeed I was confused. I thought both the original and re-encoded files had audio sync issues. As long as the video stream is MPEG4 SP, you may still just want to copy the video, re-encode the audio to AAC and mux in a MP4 container. It's pretty fast since you only have to convert the audio, you don't lose quality from re-encoding video and it plays back with hardware decoding on the NC.
Success!
Yesterday I ran nookie froyo from SD. MoboPlayer plays all files perfectly, no out of sync! It was that simple...
Thank you all for your suggestions!
Cheers,
Maciej