Related
Hello XDA team
First of all, I think that this is the appropiate forum for this question, but if it doesn´t, please feel free to move to the correct thread.
I have a spanish Vodafone HTC Magic (32B) and after several combinations I have found that the most suitable partition system for my SD card is Fat32 + 128 MG of Swap. I really hate a2sd and Ext partitions because my device doesn´t really need them, and it only mess my apps.
I´m searching a way to disable a2sd from the .zip files of ROMs in order to be able to install in my phone, but I´m not sure hot to made it
If I take, for example, MightyMax latest ROM (MghtyMax1.9.1) and extract the contents, I find "a2sd" under /system/bin, so, if I remove this app and zip again the ROM, will I be able to "Skip" this feature? should I edite the user.conf and or userinit.sh files?
Many thanks for your help
Rgds
If its a question it goes to Q&A no matter what type of question it is. Just an FYI ^_^
u can try it. I dont know if it will work or not. Just remove all traces of a2sd and resign the update.zip. The other thing is, u can just not have an ext2 partition. That will disable a2sd from the first boot...
nephron said:
u can try it. I dont know if it will work or not. Just remove all traces of a2sd and resign the update.zip. The other thing is, u can just not have an ext2 partition. That will disable a2sd from the first boot...
Click to expand...
Click to collapse
The problem is that ROMs that require a2sd won´t boot (tried MLGIN, MightyMax, Sense Hero..) with my partition layout, they all keeps in the boot screen
thats because u they want ur layout to be like this
fat32,ext2,swap
the only thing u can do is
fat32,ext2,swap
then remove ext2 leaving a gap. After that, expand your fat32 to cover over the ext2.
so ur new layout would be fat32,swap but the swap partition would be on the third partition... (i think )
You could try using the script included in Wes Garner's update here to disable A2SD (should be able to replace the script in the update file of the ROM you are using).
Moved to Q&A
daveid said:
You could try using the script included in Wes Garner's update here to disable A2SD (should be able to replace the script in the update file of the ROM you are using).
Click to expand...
Click to collapse
Many thanks Daveid, sound very interesting, I will give it a try later..
I tried re-build the MghtyMax ROM removing the a2sd bin file and adjusting the user.conf and userinit.sh files but after installing the "new" ROM (it installs just fine) the phone keeps forever in the "Vodafone" bootscreen... Any ideas??
Rgds
iamarock said:
Many thanks Daveid, sound very interesting, I will give it a try later..
I tried re-build the MghtyMax ROM removing the a2sd bin file and adjusting the user.conf and userinit.sh files but after installing the "new" ROM (it installs just fine) the phone keeps forever in the "Vodafone" bootscreen... Any ideas??
Rgds
Click to expand...
Click to collapse
Your SD card has three partitions right? And, why remove the a2sd bin file? I would use the modified script I linked you to, make a very small ext2 partition - so you can put your user.conf & userinit.sh files on it, and see what that does.
What is the logcat (or ddms) output during boot up?
daveid said:
What is the logcat (or ddms) output during boot up?
Click to expand...
Click to collapse
Sorry but I think that I'm a newbee with this kind of issues, how can I get the boot logs???
Many thanks
daveid said:
Your SD card has three partitions right? And, why remove the a2sd bin file? I would use the modified script I linked you to, make a very small ext2 partition - so you can put your user.conf & userinit.sh files on it, and see what that does.
What is the logcat (or ddms) output during boot up?
Click to expand...
Click to collapse
Sorry guys but nothing seems to work for me...
-I have tried to disable a2sd editing the user.conf file and re-building the ROM. Nothing happens. The "new" ROMS installs just OK but it keeps forever in the Bootscreen logo
-The script mentioned by daveid in entry #5 neither seems to work for me, same bootloop
Any ideas??
Many thanks in advance, this is a very annoying issue for me
Anyone can help me with this issue?
Many thanks in advance
Rgds
iamarock said:
Sorry guys but nothing seems to work for me...
-I have tried to disable a2sd editing the user.conf file and re-building the ROM. Nothing happens. The "new" ROMS installs just OK but it keeps forever in the Bootscreen logo
-The script mentioned by daveid in entry #5 neither seems to work for me, same bootloop
Any ideas??
Many thanks in advance, this is a very annoying issue for me
Click to expand...
Click to collapse
Please, please, anyone can help me with this request? I tried to install the amazing Kink's Droid Eris port without sucesss, i guess that again due the a2sd issue
Is there any way to remove a2sd or to skip ext2 requirements when installing a rom?
Many thanks in advance
Best regards
This is Quarx's custom kernel for most 2.1 ROMs.
It allows your phone to:
WiFi/USB Tether
Be overclocked (w/ SetCPU)
Also, I have enabled adb root (Which lets you have root shell in adb, remount the system partition with read/write access (adb remount) and also adb push is now used as root, so you can push files to the system directory with no problem)
It also updates/installs Superuser and Busybox when installed.
To install this:
Just flash it via recovery (versions 2.5.1.8 -> 3.x.x.x)
Download:
Download from my Dropbox
ZIP File, 4.8MB
Any questions? Ask below.
Jack
Does it work on cm7/sense?
Sent from my GT540 using XDA Premium App
LinxAndroid said:
Does it work on cm7/sense?
Sent from my GT540 using XDA Premium App
Click to expand...
Click to collapse
No, this kernel is for the 2.1 roms only. CM7 and Sense have adb remount/push/rootshell enabled by default.
This is very old kernel... not work corectly on V20C
patryk95juve said:
This is very old kernel... not work corectly on V20C
Click to expand...
Click to collapse
This worked fine on v20c for me, also, this is no-different than the pcfighter (i think thats what it is called) kernel.
Jack
JackG256 said:
This worked fine on v20c for me, also, this is no-different than the pcfighter (i think thats what it is called) kernel.
Jack
Click to expand...
Click to collapse
Does anyone think this would work with SwiftSense? I think imma try this , even if it *shouldn't* work , you never know unless you try #
#jamie
p.s. sorry if I confuse anyone with my language LOL
Well... it's 2.1 rom and I don't know is it gonna work. but even if we could start it up, many things wont work...
I'm sorry for my English, but I don't know how to express myself
max1919 said:
Well... it's 2.1 rom and I don't know is it gonna work. but even if we could start it up, many things wont work...
I'm sorry for my English, but I don't know how to express myself
Click to expand...
Click to collapse
What do you mean by "many things won't work" this kernel is based off LG's official 2.1 kernel, so everything works.
EDIT: Sorry, I didn't read the post before yours, I thought you said that this kernel wouldn't have everything working on 2.1-.- I think I should read everything first.
Jack
Jamielawther said:
Does anyone think this would work with SwiftSense? I think imma try this , even if it *shouldn't* work , you never know unless you try #
#jamie
p.s. sorry if I confuse anyone with my language LOL
Click to expand...
Click to collapse
I tried this kernel with my 2.1 hero port, but it wont boot, and even with the SwiftDroid 1.8 kernel, I still cant get it to boot. I think it could be something in the lib folder. I just want to get it working.
Jack
Link died!
JackG256 said:
I tried this kernel with my 2.1 hero port, but it wont boot, and even with the SwiftDroid 1.8 kernel, I still cant get it to boot. I think it could be something in the lib folder. I just want to get it working.
Jack
Click to expand...
Click to collapse
When your phone boots up, connect it to the computer, open cmd, navigate to the folder: androidsdk/tools and type ddms.bat. This will open a nice little screen where you can see what's happening with your phone. If your phone doesn't boot, you'll see the errors(marked in red) causing the phone not to boot.
vqt907 said:
Link died!
Click to expand...
Click to collapse
Here you go!
Anyone know where I can get black quarx 2.1 recovery file.
The one with new kernel and jit.
I can't find it anyware and also is quarx black the best 2.1 rom.
Sent from my GT540 using Tapatalk
thugimmortal said:
Anyone know where I can get black quarx 2.1 recovery file.
The one with new kernel and jit.
I can't find it anyware and also is quarx black the best 2.1 rom.
Sent from my GT540 using Tapatalk
Click to expand...
Click to collapse
Do you want me to make you one? Give me around 45 mins because my internet is very slow lol. I'll see if I can get ADB Remount to work too. Adding adbd root to init.rc/init.swift.rc should get it to work.
Here you go: http://www.multiupload.com/5B6LZW68S1
Quarx Black w/ Quarx Custom Kernel 0.3.1 and JIT.
I have also:
Updated Superuser app & binary (to 2.3.6.3 app/2.3.2-efgh binary)
Updated Busybox (to v1.19)
Added /system/etc/init.d script support (Also included scripts that auto zipalign, put dalvik-cache on cache partition instead of data, so more space for apps Thanks to mmxtrem for the scripts.)
Added dalvik.vm.execution-mode=int:jit to build.prop (as I think JIT won't work without it, not sure, just added it for reassurance )
Couldn't get adb root to work, so I added sysro/sysrw instead, so if you need to quickly mount system partition in adb shell with read/write use 'sysrw' if you want read only, then use 'sysro'
Thanks dude
Using it now but cant set swap or see my ext partition
Sent from my GT540 using Tapatalk
thugimmortal said:
Thanks dude
Using it now but cant set swap or see my ext partition
Sent from my GT540 using Tapatalk
Click to expand...
Click to collapse
Try removing /system/etc/init.d/0*mountsd using Root Explorer
effortless. said:
Try removing /system/etc/init.d/0*mountsd using Root Explorer
Click to expand...
Click to collapse
Removed but still cant set swap or access sd-ext
Swapper 2 wont work and swapper wont set because no visible partition . Even though i have ext 2
Sent from my GT540 using Tapatalk
As normal, it's not my fault if you fubar your tab by flashing this or if zombies come and speedhump your cat. You've been warned.
Well, hello there, some of you may know me from my vzwtab (7") work, but I'm sure most of you don't.
No matter, I just finished deodexing my framework and app folders, so I decided to share with you.
This isn't anything special, just you're stock system that's been deodexed, I did not remove any programs, there are really only three or so 'bloatware' apps on here, so I didn't bother.
If you would like to, just use root file explorer (or your preferred method) to remove them.
In addition to the stock items I have added pershoot's SU/Busybox/misc package (SOURCE) All credit goes to him for that.
If there's anything else, just let me know. I have tested this on my own rooted tab and everything seems to work fine and be stable.
If you notice any issues, please format/clear both Dalvik & normal Cache. It's probably the cause.
Features
Deodexed flashable system
Pershoot's SU/Busybox/misc pacakage (nano, VIM, all kinds of other goodies)
Changelog
06212011- r1 - Initial Release
Known Issues
You may have to go through and manually delete your odex's in /system/app/ and /system/framework/ but the apk's and jar's no longer call them. (I can't get the amend format command working right. if you want to tell me how, please!)
Installation
Reboot into CWM either via ROM Manager or via power off, volume down + power, volume down to CWM icon and volume up to select.
Select Install Zip from SD Card
Navigate to location of zip and select okay
Clear Cache and Dalvik Cache (in advanced)
Reboot
Make themes for me
Download
HERE
Lastly, if you like my work, donate to me so I can donate money to devs that make my world easier (and therefore yours).
awesome finally someone to break ground for the Samsung Galaxy tab! Thanks will try it out!
Not sure if it matters but is this for retail or I/o version? Does it matter since it is basically the same tab?
For any ideas: maybe you could include a way for hulu to work without any work arounds? And maybe some lag fixes. Although that may be solved with a custom kernel.
Sent from my PC36100 using XDA Premium App
Decided to test this on the retail version.
The only problem is that root is broken because there are two su binaries installed.
/system/bin/su - installed from file Samsung_Galaxy_Tab_10.1_root.zip when you rooted the device.
/system/xbin/su - installed when you added [Tools] – SU/BusyBox/Misc – Galaxy Tab 10.1 (Update: 6/18/11).
To fix:
http://forum.xda-developers.com/showpost.php?p=14016703&postcount=18
------
the /system/bin/su binary need to be removed.
Su does not work on the tablet with two su binaries installed.
Use adb to remove /system/bin/su
adb remount
adb shell
cd /system/bin
rm su
reboot
I tried running titanium backup prior to a reboot after removing /system/bin/su and it would not work. I uninstalled/reinstalled and it worked, but a reboot may have fixed the problem.
I manually deleted all the odex files - no problems so far. I will provide an update later if I have problems.
------------
You can remove /system/bin/su when you update the image again.
JD
Yeah, I just noticed that myself actually. Don't know why I didn't catch it before.
Anywho, I think I'll prolly push an update to this tomorrow after I write a script to remove the odex's. It was my initial thought, but I thought it would be easier to used the updater-script to do it, but looks like just writing an additional one will be best.
Glad the su thing didn't confuse you too much!
Sweet thanks for this. Going to give it a whirl!
I flashed the Samsung_Galaxy_Tab_10.1_root.zip after flashing the Rom. Everying is working fine.
I didn't need to remove su from anywhere.
Thanks!
Sent from my GT-P7510 using XDA Premium App
Same here
Sent from my GT-P7510 using XDA Premium App
Any chance you can add a browser.apk that gives access to Google Labs?
Sent from my GT-P7510 using Tapatalk
touchpro247 said:
I flashed the Samsung_Galaxy_Tab_10.1_root.zip after flashing the Rom. Everying is working fine.
I didn't need to remove su from anywhere.
Thanks!
Sent from my GT-P7510 using XDA Premium App
Click to expand...
Click to collapse
You will only have problems when you try to run an app that requires root (Root Explorer, Titanium backup....).
danielsjam said:
You will only have problems when you try to run an app that requires root (Root Explorer, Titanium backup....).
Click to expand...
Click to collapse
Nope, not at all. They both run fine. Thanks tho. Others may have that problem, I don't.
touchpro247 said:
Nope, not at all. They both run fine. Thanks tho. Others may have that problem, I don't.
Click to expand...
Click to collapse
If you have both su binaries - and all works - good to hear. I will flash again, but will reboot a second time to see if it matters. Those apps did not run until I remove the su from bin.
Strange how two devices with the same specs operate different on certain software.
JD
shouldn't that have been:
cd /system/bin ?
i didn't try mine w both since i didn't want hassle of find out if it worked or not. no reason for 2 su's.
danielsjam said:
Use adb to remove /system/bin/su
adb remount
adb shell
cd /system/app
rm su
reboot
JD
Click to expand...
Click to collapse
madsquabbles said:
shouldn't that have been:
cd /system/bin ?
i didn't try mine w both since i didn't want hassle of find out if it worked or not. no reason for 2 su's.
Click to expand...
Click to collapse
Yes - my bad - should be /system/bin - will correct it.
Thanks
Jd
Its because one su has the correct permissions and the other doesn't.
Sent from my GT-P7510 using XDA Premium App
how about adding some screenshots ??
pflorin said:
how about adding some screenshots ??
Click to expand...
Click to collapse
Looks just like stock...
So whats this have that stock doesnt,,,whats the pro's to flashing as opposed to what I already have?
concept0 said:
Looks just like stock...
Click to expand...
Click to collapse
camblue said:
So whats this have that stock doesnt,,,whats the pro's to flashing as opposed to what I already have?
Click to expand...
Click to collapse
When themes become available you'll be able to flash them. You'll aslo be able to flash a few other mods...
Sent from my GT-P7510 using XDA Premium App
anaphora68 said:
Any chance you can add a browser.apk that gives access to Google Labs?
Sent from my GT-P7510 using Tapatalk
Click to expand...
Click to collapse
No, you're more than welcome to sideload an apk's you wish however.
I'll push out an update today that gets rid of my silly su mistake, gimmie a couple hours.
Glad you people are enjoying it.
I'm using the the stock 2.3.4 from Spice website and this is by far the best considering wifi important.
My question is, can we enable init.d support or we need a special kernel for that?
I tried a tut. from zeppelin but failed miserably...
Any idea guys???
whyzee,
I followed this http://forum.xda-developers.com/showthread.php?t=1017291 and was able to use init.d without any issues.
cowsgo said:
whyzee,
I followed this http://forum.xda-developers.com/showthread.php?t=1017291 and was able to use init.d without any issues.
Click to expand...
Click to collapse
Thanks for the link but that was the one I tried without success .... Should try again when I have some real time...
whyzee
did you get an error when you ran the script? If you didn't then get root explorer from the market and see if you have the folder. It should be in the \system\etc folder. When I ran it I had no issues and followed the instructions that were on the page. Dumb question, did you reboot your phone once you ran this? If you got a error then you could try pm Zep and see if he has ideas that might help.
cowsgo said:
whyzee
did you get an error when you ran the script? If you didn't then get root explorer from the market and see if you have the folder. It should be in the \system\etc folder. When I ran it I had no issues and followed the instructions that were on the page. Dumb question, did you reboot your phone once you ran this? If you got a error then you could try pm Zep and see if he has ideas that might help.
Click to expand...
Click to collapse
The script you are executing is not meant for our device. Its trying to mount system partition as mtd type, while we need emmc partition type. Also, our device does not have moto-boot-mode file which this script is trying to replace.
So my suggestions are :
If you are using MIUI or CM, then they already support init.d scripts. (I guess)
Or
If you are using stock or andro - id then just copy following code in post boot.sh (something like that) found in /system/etc/, at the end of file.
Code:
for BOOT in "/system/etc/init.d/"*; do
.$BOOT
done
P.S. Note that you have enabled executable permission for all of your scripts placed in /system/etc/init.d
Sent from my CSL-MI410 using XDA App
Thanks for the replies guys, I've jumped to MIUI 1.10 now and as Napstar said it natively supports init.t...
whyzee said:
Thanks for the replies guys, I've jumped to MIUI 1.10 now and as Napstar said it natively supports init.t...
Click to expand...
Click to collapse
hi
correct me if im wrong. To my knowledge u need init.d to use apps2sd so u can put ur apps on ur SD and now since our phone has around 1GB phone storage which i feel is more than enough to install all the apps u need I dont see a reason why we need the init.d
haree said:
hi
correct me if im wrong. To my knowledge u need init.d to use apps2sd so u can put ur apps on ur SD and now since our phone has around 1GB phone storage which i feel is more than enough to install all the apps u need I dont see a reason why we need the init.d
Click to expand...
Click to collapse
init.d is a folder on /system/etc folder which runs whatever scripts you put in it during boot.....
hey guys, where to find multipackage firmware for ace, only found s5830i/c multipack thread. none for this device.
thanks for all ur help.
dzeig said:
hey guys, where to find multipackage firmware for ace, only found s5830i/c multipack thread. none for this device.
thanks for all ur help.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=39294309
KPH
thanks alot. btw, is it possible to go back to stock from custom rom (ie cm10.1) using single firmware.
coz, i need to flash multipack fw first (from cusrom) before flashing lastest stock, on mini.
dzeig said:
thanks alot. btw, is it possible to go back to stock from custom rom (ie cm10.1) using single firmware.
coz, i need to flash multipack fw first (from cusrom) before flashing lastest stock, on mini.
Click to expand...
Click to collapse
Be careful the rom I posted was for Galaxy Ace!!!
Yes, It's possible, I don't know in mini ... this is the GT-S5830 Q&A THREAD so...
but the fastest way to go back to stock is doing a backup before to use the custom, and then restoring it when you want to go back via custom RECOVERY, or FALSHING A FRESH STOCK ROM VIA ODIN
...and in Galaxy Ace it's possible to use directly the lastest firmware, "one package fw"
i know, im using ace right now.
the thing is i was failed revert back to stock using one pack firmware (on mini). am bit afraid it happens to ace either. but now it's all clear, thanks for all ur helps.
edit: whoaa, we can backup stock on ace, it s not recommended on mini. thanks again.
dzeig said:
i know, im using ace right now.
the thing is i was failed revert back to stock using one pack firmware (on mini). am bit afraid it happens to ace either. but now it's all clear, thanks for all ur helps.
edit: whoaa, we can backup stock on ace, it s not recommended on mini. thanks again.
Click to expand...
Click to collapse
well, the best way to avoid all kind of troubles is flashing a fresh stock via Odin
I'm using a bareboned stock rom, I deleted all useless apps etc and I chaged the kernel and stock partitions from .rfs to .ext4, so I have a clean backup ready to restore in my SDCARD, so I can flash whatever I want, and then when I get tired I can always return to my clean previous rom and I don't need to use Odin
am a noob so...
1. change the kernel? even for lastest fw?
2. how to change the.rfs partition?
dzeig said:
am a noob so...
1. change the kernel? even for lastest fw?
2. how to change the.rfs partition?
Click to expand...
Click to collapse
well... you can change the kernel, deodex your rom, change .rfs partition format to .ext4 format and add more tweaks, barebone your rom... (not for a noob way) or the easiest way!! you can flash a based stock rom with ALL this changes done e.g. http://forum.xda-developers.com/showthread.php?t=1534804
Viper The Ripper said:
well... you can change the kernel, deodex your rom, change .rfs partition format to .ext4 format and add more tweaks, barebone your rom... (not for a noob way) or the easiest way!! you can flash a based stock rom with ALL this changes done e.g. http://forum.xda-developers.com/showthread.php?t=1534804
Click to expand...
Click to collapse
hey viper, can you tell how to root lastest fw (bvkt6). cuz I tried using root.zip, upd_1.zip, universalgbroot_25 none of it works. thanks.
dzeig said:
hey viper, can you tell how to root lastest fw (bvkt6). cuz I tried using root.zip, upd_1.zip, universalgbroot_25 none of it works. thanks.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2346116
I need to know which apps are included in /system. The problem is that there isn't enough free space in /system in this rom so we could use a script to delete whatever app in this partition that allow us to push su.apk and the binaries
Viper The Ripper said:
http://forum.xda-developers.com/showthread.php?t=2346116
I need to know which apps are included in /system. The problem is that there isn't enough free space in /system in this rom so we could use a script to delete whatever app in this partition that allow us to push su.apk and the binaries
Click to expand...
Click to collapse
i read those threads.
so all i need to do is changing the updater-script, and delete unuseful system apps, right?
man, your so helpful. thanks a lot.
dzeig said:
i read those threads.
so all i need to do is changing the updater-script, and delete unuseful system apps, right?
man, your so helpful. thanks a lot.
Click to expand...
Click to collapse
Yeah, it's because I needed to know about your useless apps m but you can modify the script too
I've posted in the other thread how to add to the script how to mount /system auntomatically
You're welcome dude!
Viper The Ripper said:
Yeah, it's because I needed to know about your useless apps m but you can modify the script too
I've posted in the other thread how to add to the script how to mount /system auntomatically
You're welcome dude!
Click to expand...
Click to collapse
i got my phone rooted. ur magical zip works great. once again thank you.
now, i got 50+ mb free space in /system.
i just tried backingup via cwm, it said error mounting the system, bla, bla...
so, next question is how to backup this rom?
dzeig said:
i got my phone rooted. ur magical zip works great. once again thank you.
now, i got 50+ mb free space in /system.
i just tried backingup via cwm, it said error mounting the system, bla, bla...
so, next question is how to backup this rom?
Click to expand...
Click to collapse
you can try mounting manually /system and then doing the backup
go to mount and system >>> mount /system >>> back >>> backup and restore >>> backup
Viper The Ripper said:
you can try mounting manually /system and then doing the backup
go to mount and system >>> mount /system >>> back >>> backup and restore >>> backup
Click to expand...
Click to collapse
already tried to mount /system manually but no luck: "error mounting the system".
what i have to do?
dzeig said:
already tried to mount /system manually but no luck: "error mounting the system".
what i have to do?
Click to expand...
Click to collapse
mm I guess what is your problem
maybe .rfs format , so try to convert your partitions to .ext4 partition, It would solve your problem
use CF-Root-S5830_ext4-v1.3u3.apk to convert .rfs to .ext4 format
Viper The Ripper said:
mm I guess what is your problem
maybe .rfs format , so try to convert your partitions to .ext4 partition, It would solve your problem
use CF-Root-S5830_ext4-v1.3u3.apk to convert .rfs to .ext4 format
Click to expand...
Click to collapse
is this the correct kernel: CF-Root-S5830-v3.7-b84.zip?
edit: i think i did it right. now ive converted it to .ext4.
ive backed it up too, and it works.
my next question, where is a2sd script located, am bout to change it to int2ext4 (i didnt find it in init.d folder)?
dzeig said:
is this the correct kernel: CF-Root-S5830-v3.7-b84.zip?
edit: i think i did it right. now ive converted it to .ext4.
ive backed it up too, and it works.
my next question, where is a2sd script located, am bout to change it to int2ext4 (i didnt find it in init.d folder)?
Click to expand...
Click to collapse
Wooow I'm glad!! I'm a wiseman xDDD
---------- Post added at 05:07 AM ---------- Previous post was at 05:03 AM ----------
dzeig said:
is this the correct kernel: CF-Root-S5830-v3.7-b84.zip?
edit: i think i did it right. now ive converted it to .ext4.
ive backed it up too, and it works.
cf-root b84 work fine
my next question, where is a2sd script located, am bout to change it to int2ext4 (i didnt find it in init.d folder)?
Click to expand...
Click to collapse
Well you need a custom kernel to get an init.d folder or create it on yourself but the easy way, flash cf-root b84, BE 1.5.1. or whatever kernel you want, and you'll get an init.d folder support, so you'll be able to flash the int2ext script without any kind of problem
Viper The Ripper said:
Wooow I'm glad!! I'm a wiseman xDDD
Click to expand...
Click to collapse
i believe you are, how bout removing a2sd i've mentioned before...
edit: mmm... i found a2sd uninstaller zip, i ll give it a go..
dzeig said:
i believe you are, how bout removing a2sd i've mentioned before...
Click to expand...
Click to collapse
Install a Terminal Emulator app and type this code
Code:
su
a2sd remove
But it is not compulsory to install int2ext script, at least if you didn't flash darktremor script to activate app2sd
---------- Post added at 05:17 AM ---------- Previous post was at 05:14 AM ----------
dzeig said:
i believe you are, how bout removing a2sd i've mentioned before...
edit: mmm... i found a2sd uninstaller zip, i ll give it a go..
Click to expand...
Click to collapse
Well you can try it, of course