Database Develop

[Q] One-Click Root/Custom ROM

Just wondering if anyone is working on a one-click root or custom ROM (obviously, for a donation!!!) for the NC? I am going to take the time to root this weekend, but would obviously love to just DL something and flash it.

Well, one click isn't really one click. There are lots of other clicks involved, turn on computer clicks, go to download page clicks, download clicks, then load on SD card clicks or Start - Run - cmd clicks, then the closing windows clicks.
What I believe you should have been asking, without the sugarcoating of the "one-click" phrase, is: "If it isn't too much trouble, can I use your third Genie wish after you've rubbed the lamp? I'll donate, of course, not that it would matter because I can only assume one of those first two wishes was an insane amount of money"

devis said:
Well, one click isn't really one click. There are lots of other clicks involved, turn on computer clicks, go to download page clicks, download clicks, then load on SD card clicks or Start - Run - cmd clicks, then the closing windows clicks.
What I believe you should have been asking, without the sugarcoating of the "one-click" phrase, is: "If it isn't too much trouble, can I use your third Genie wish after you've rubbed the lamp? I'll donate, of course, not that it would matter because I can only assume one of those first two wishes was an insane amount of money"
Click to expand...
Click to collapse
Precisely, what you said!!!! lol. Believe me, I try...

coldbeverage said:
Precisely, what you said!!!! lol. Believe me, I try...
Click to expand...
Click to collapse
Glad you enjoyed reading it as much as I did writing it
Now... that out of the way, and in all seriousness, can I use that third wish from someone?

devis said:
Glad you enjoyed reading it as much as I did writing it
Now... that out of the way, and in all seriousness, can I use that third wish from someone?
Click to expand...
Click to collapse
I'll have more time to mess with this after this week is over. On my todo list is trying the BN kernel's video console support so we can at least write a message to the screen when Nooter is done rooting, and copying over superuser.apk and su and maybe Astro for starting out.
With the above we could have an almost-1-click root if someone could make the card writing process easier. It would be nice if we had a Linux boot CD or boot USB image that can reformat the card (check that it's a USB device first and ask the user!) to make the boot partition the whole disk automatically. Or someone could verify the rumor that HP's USB bootdisk maker formats the drive correctly.
I'm not the guy to do a 1-click root; exploits aren't my thing, but my goal is to make Nooter easy enough that we don't need to go that route.

My apologies if this has been covered....but with my eken slate, we use an update.zip file....the device automatically does a restore with this file if its present on the sd card

Until someone actually does a custom rom roll, it's unlikely that you're going to see one-click root. Since B&N decided to hide the Android menus that would allow us to side-load Apps, we have to boot from the SD image as part of the process.
I will look into making things a little easier though by adding a few items to the list of things that nooter does:
+ Install ADW and/or Zeam.
+ Install android.hardware.touchscreen.multitouch.xml to enable multi-touch on Android applications that support it.
+ Enable the installation of Non-Market Apps.
I personally took a shortcut when it came to rooting my personal Nook Color. Others may want to use this method as well.
(1) Write the nooter image to SD:
# dd if=nooter_sdcard_40mb.img of=/dev/<sdcard>
(2) Make sure that the Nook Color is powered off.
(3) Install the SD card with nooter written to it in the Nook Color
(4) Connect the Nook Color via USB to your computer. (Linux in my case). The Nook Color will power on all by its lonesome when it is connected to the USB.
(5) Wait a few minutes for nooter to do its thing. Seriously folks. Trying to time this down to seconds until you power the Nook Color off at this step is way overkill. Look at your watch. Add 5 minutes to whatever time it is. When 5 minutes have passed, you can safely go to step 6.
(6) Hold down the power button on your Nook Color for what seems like forever. You can count this one in seconds but, make sure that it has powered down. Without something on the screen, that is difficult to tell that it has powered down. I just timed it and an 8-10second continuous hold of the power button powered the Nook Color off. To be safe, lets say you hold it for 15 seconds.
(7) Remove the SD card from your Nook Color.
(8) Power your Nook Color Back on. (Hold the power button until you see the screen turn on. Duh!)
At this point, your Nook Color is should be rooted.
I then followed the instructions at nookdevs.com/NookColor_Rooting to use ADB to enable multi-touch and Non-Market Apps.

Thanks. I am just an IT lawyer who's only been at this android stuff since August so much to learn (for instance, figuring out what you wrote below.....I do try to learn and not constantly ask on here though)!!!!
johnopsec said:
Until someone actually does a custom rom roll, it's unlikely that you're going to see one-click root. Since B&N decided to hide the Android menus that would allow us to side-load Apps, we have to boot from the SD image as part of the process.
I will look into making things a little easier though by adding a few items to the list of things that nooter does:
+ Install ADW and/or Zeam.
+ Install android.hardware.touchscreen.multitouch.xml to enable multi-touch on Android applications that support it.
+ Enable the installation of Non-Market Apps.
I personally took a shortcut when it came to rooting my personal Nook Color. Others may want to use this method as well.
(1) Write the nooter image to SD:
# dd if=nooter_sdcard_40mb.img of=/dev/<sdcard>
(2) Make sure that the Nook Color is powered off.
(3) Install the SD card with nooter written to it in the Nook Color
(4) Connect the Nook Color via USB to your computer. (Linux in my case). The Nook Color will power on all by its lonesome when it is connected to the USB.
(5) Wait a few minutes for nooter to do its thing. Seriously folks. Trying to time this down to seconds until you power the Nook Color off at this step is way overkill. Look at your watch. Add 5 minutes to whatever time it is. When 5 minutes have passed, you can safely go to step 6.
(6) Hold down the power button on your Nook Color for what seems like forever. You can count this one in seconds but, make sure that it has powered down. Without something on the screen, that is difficult to tell that it has powered down. I just timed it and an 8-10second continuous hold of the power button powered the Nook Color off. To be safe, lets say you hold it for 15 seconds.
(7) Remove the SD card from your Nook Color.
(8) Power your Nook Color Back on. (Hold the power button until you see the screen turn on. Duh!)
At this point, your Nook Color is should be rooted.
I then followed the instructions at nookdevs.com/NookColor_Rooting to use ADB to enable multi-touch and Non-Market Apps.
Click to expand...
Click to collapse

coldbeverage said:
Thanks. I am just an IT lawyer who's only been at this android stuff since August so much to learn (for instance, figuring out what you wrote below.....I do try to learn and not constantly ask on here though)!!!!
Click to expand...
Click to collapse
No problem. Just so nobody is confused about anything I posted above: I take absolutely no credit for anything (especially nooter) in my post. I simply wrote down the steps I took using OTHER PEOPLES ideas and code.

Your simple instructions are pefect! The only thing I would add is for the Windows users to use WinImage on step 1.
Rooting really is easy; it is getting the ADB drivers to work properly (for us Windows users) that is the difficult step. If you can modify nooter to add the extra steps of writing the file to allow .apk installation; installing Astro or other file explorer; installing a launcher (Zeam seems to be a good choice); and maybe SlideME as a Market until the Google Market is figured out - I think the rooting process couldn't be much easier given the nature of the device!
johnopsec said:
Until someone actually does a custom rom roll, it's unlikely that you're going to see one-click root. Since B&N decided to hide the Android menus that would allow us to side-load Apps, we have to boot from the SD image as part of the process.
I will look into making things a little easier though by adding a few items to the list of things that nooter does:
+ Install ADW and/or Zeam.
+ Install android.hardware.touchscreen.multitouch.xml to enable multi-touch on Android applications that support it.
+ Enable the installation of Non-Market Apps.
I personally took a shortcut when it came to rooting my personal Nook Color. Others may want to use this method as well.
(1) Write the nooter image to SD:
# dd if=nooter_sdcard_40mb.img of=/dev/<sdcard>
(2) Make sure that the Nook Color is powered off.
(3) Install the SD card with nooter written to it in the Nook Color
(4) Connect the Nook Color via USB to your computer. (Linux in my case). The Nook Color will power on all by its lonesome when it is connected to the USB.
(5) Wait a few minutes for nooter to do its thing. Seriously folks. Trying to time this down to seconds until you power the Nook Color off at this step is way overkill. Look at your watch. Add 5 minutes to whatever time it is. When 5 minutes have passed, you can safely go to step 6.
(6) Hold down the power button on your Nook Color for what seems like forever. You can count this one in seconds but, make sure that it has powered down. Without something on the screen, that is difficult to tell that it has powered down. I just timed it and an 8-10second continuous hold of the power button powered the Nook Color off. To be safe, lets say you hold it for 15 seconds.
(7) Remove the SD card from your Nook Color.
(8) Power your Nook Color Back on. (Hold the power button until you see the screen turn on. Duh!)
At this point, your Nook Color is should be rooted.
I then followed the instructions at nookdevs.com/NookColor_Rooting to use ADB to enable multi-touch and Non-Market Apps.
Click to expand...
Click to collapse

jasoraso said:
Your simple instructions are pefect! The only thing I would add is for the Windows users to use WinImage on step 1.
Rooting really is easy; it is getting the ADB drivers to work properly (for us Windows users) that is the difficult step. If you can modify nooter to add the extra steps of writing the file to allow .apk installation; installing Astro or other file explorer; installing a launcher (Zeam seems to be a good choice); and maybe SlideME as a Market until the Google Market is figured out - I think the rooting process couldn't be much easier given the nature of the device!
Click to expand...
Click to collapse
^ This.
Thats the main reason I am holding out on rooting... That and I want to see how far it goes before the market place comes out unless an easy solution like this comes out. While I like the updates here, I am also not in a huge needs for a large phone... but still Great work so far!!!

johnopsec said:
No problem. Just so nobody is confused about anything I posted above: I take absolutely no credit for anything (especially nooter) in my post. I simply wrote down the steps I took using OTHER PEOPLES ideas and code.
Click to expand...
Click to collapse
Lol. I just meant that I try to help you guys, but I have so much to learn on actually doing the stuff you do. Everyone is sharing there stuff on here openly. All good.

I am going to try to teach myself how to use ADB. Kinda nervous though.
jasoraso said:
Your simple instructions are pefect! The only thing I would add is for the Windows users to use WinImage on step 1.
Rooting really is easy; it is getting the ADB drivers to work properly (for us Windows users) that is the difficult step. If you can modify nooter to add the extra steps of writing the file to allow .apk installation; installing Astro or other file explorer; installing a launcher (Zeam seems to be a good choice); and maybe SlideME as a Market until the Google Market is figured out - I think the rooting process couldn't be much easier given the nature of the device!
Click to expand...
Click to collapse

coldbeverage said:
I am going to try to teach myself how to use ADB. Kinda nervous though.
Click to expand...
Click to collapse
No kidding, that is whaat ij aam strugglliing with. Thhaatt and tthe stupid keyybboard!

pokey9000 said:
With the above we could have an almost-1-click root if someone could make the card writing process easier. It would be nice if we had a Linux boot CD or boot USB image that can reformat the card (check that it's a USB device first and ask the user!) to make the boot partition the whole disk automatically. Or someone could verify the rumor that HP's USB bootdisk maker formats the drive correctly.
Click to expand...
Click to collapse
I was messing around with UNetBootin, which is similar to the HP USB formatter. It is designed to take linux ISOs and format them as bootable. But I don't know what specialized format Nooter uses. I didn't get far on this front.
It seems windows users are having trouble with windows drivers needed to get USB ADB working. An alternative is to enable ADB over IP. Leaving this open persistantly is a security hole, but it may be appropriate for initial setup.

PHiZ said:
I was messing around with UNetBootin, which is similar to the HP USB formatter. It is designed to take linux ISOs and format them as bootable. But I don't know what specialized format Nooter uses. I didn't get far on this front.
It seems windows users are having trouble with windows drivers needed to get USB ADB working. An alternative is to enable ADB over IP. Leaving this open persistantly is a security hole, but it may be appropriate for initial setup.
Click to expand...
Click to collapse
Getting the OMAP to boot off of SD requires a few things:
-the OMAP wired to boot from SD
-an SD card with a specific disk geometry as reported by the partition table
-a FAT16 or 32 filesystem on the first partition
-a first and second stage bootloader (MLO and u-boot.bin) in the FAT filesystem
The hardest part of getting Nooter installed correctly is creating that special partition table, and so I released it as a raw dump of an SD formatted using that scheme to only a 40MB image. The theory I've heard is that for maximum BIOS compatibility the HP USB formatter tool generates this same sort of geometry, after which you just need to drag and drop the four Nooter files onto the drive. I haven't had a chance to try this yet though.
edit: I'll be damned, it does work! Just format using hpusbfw.exe (Google it) with "quick format" checked and "create a dos startup disk" unchecked. Then copy MLO, u-boot.bin, uImage, and uRamdisk over. That's it. Plus you wind up with a FAT32 partition that takes up your whole disk, not just 40MB.

pokey9000 said:
Getting the OMAP to boot off of SD requires a few things:
-the OMAP wired to boot from SD
-an SD card with a specific disk geometry as reported by the partition table
-a FAT16 or 32 filesystem on the first partition
-a first and second stage bootloader (MLO and u-boot.bin) in the FAT filesystem
The hardest part of getting Nooter installed correctly is creating that special partition table, and so I released it as a raw dump of an SD formatted using that scheme to only a 40MB image. The theory I've heard is that for maximum BIOS compatibility the HP USB formatter tool generates this same sort of geometry, after which you just need to drag and drop the four Nooter files onto the drive. I haven't had a chance to try this yet though.
edit: I'll be damned, it does work! Just format using hpusbfw.exe (Google it) with "quick format" checked and "create a dos startup disk" unchecked. Then copy MLO, u-boot.bin, uImage, and uRamdisk over. That's it. Plus you wind up with a FAT32 partition that takes up your whole disk, not just 40MB.
Click to expand...
Click to collapse
Sounds like we may be getting close to a custom rom....????
Is the uImage the ROM? or is it all 4 pieces

Sorry if I am misunderstanding this pokey since I am a total noob. I too have been holding out on rooting hoping for an easier solution (I do not even know how to navigate to directories in terminal) I believe you are implying that the NC can be rooted using this method and is in fact much easier to accomplish. You said that you had to copy over those 4 files once you format the card. Where can one obtain those files?
Thanks man for all your dedication and hard work!

sudermatt said:
Sounds like we may be getting close to a custom rom....????
Is the uImage the ROM? or is it all 4 pieces
Click to expand...
Click to collapse
MLO - first stage bootloader. The OMAP's built in ROM looks for this on the SD and runs it. MLO then looks for u-boot.bin and runs it if it can find it on the card. It's like the Nook's boot sector.
u-boot.bin - second stage bootloader. This is responsible for figuring out how to get Linux and the ramdisk in memory. This copy loads up uImage and uRamdisk from microsd and starts running the kernel. This is similar but not the exact same as the one on the internal flash.
uImage - The Linux kernel. This copy is built specifically for Nooter.
uRamdisk - a Linux filesystem that gets loaded into RAM. Contains the Nooter script, disk utilities for performing the root, and other bits and pieces that let you log in over USB and get a shell.
This really has nothing to do with a custom ROM, it's just an easier way to install Nooter.

th3c1am said:
Sorry if I am misunderstanding this pokey since I am a total noob. I too have been holding out on rooting hoping for an easier solution (I do not even know how to navigate to directories in terminal) I believe you are implying that the NC can be rooted using this method and is in fact much easier to accomplish. You said that you had to copy over those 4 files once you format the card. Where can one obtain those files?
Thanks man for all your dedication and hard work!
Click to expand...
Click to collapse
If you have a card with Nooter on it, you could mount it on a PC and pull all 4 files off. Using the HP utility is an easier option for people who want to root under Windows and are having trouble with the disk utilities. When I get a chance I'll post the files separately.

Stupid noob questions on NC rooting

My kids received Nook Color readers for Christmas, and like everything, they look to Dad to optimize them.
I was going to try rooting, but a couple of things remain unclear:
- Do I have to 'auto-noot' to root the Noot, or are there other options (other tools, manual rooting, etc.)
- Should I upgrade the software to 1.0.1 prior to rooting or not?
I tried to give auto-noot for 1.0.0 a quick run, but I couldn't get the SD card to boot (and a check revealed that I had two FAT16 partitions, one with the appropriate images and the other with the files needed). I'm assuming it's because the card I have might be too slow (portal recommends Class 6 or greater, and the card I'm using is a cheapo card I got with an earlier phone that I'm not too sure of).
Thoughts? Tips?

I upgraded mine to 1.0.1 first then rooted.
What OS is on your PC?
If Windows, did you use Win32DiskImager to write the image to microSD card?
Take a look at here for different ways of rooting here http://www.nookdevs.com/Portal:NookColor#Rooting
The easiest and the way I rooted is below which I borrowed from http://blogkindle.com/2010/12/read-kindle-books-on-nook-color/
Here’s what you need to do:
1. Before rooting make sure that you’ve registered the device with B&N as it might not work after rooting.
2. Download nooter that corresponds to you Nook version. You can check your Nook version by pressing Nook button, selecting “Settings” >> “Device Info” >> “About your NOOKcolor” >> Software version:
--- for 1.0.0 – GabrialDestruir’s auto nooter 2.12.15 file 15 Dec 2010
--- for 1.0.1 – GabrialDestruir’s auto nooter 2.12.25 file 25 Dec 2010
3. Unpack the file
4. On Windows use Win32DiskImager to write the image to microSD card (please note that all data on the card will be lost). For Linux or Mac, check out NookDevs.com for detailed microSD imaging instructions.
5. Completely power off NOOKcolor by holding the power button until the screen blurs and “Power off NOOKColor” dialog appears. Select “Power Off” and wait for the device to shut down completely.
6. Turn device face down and open the microSD card container in the lower right corner. Push the card in with metal contacts facing down.
7. Connect the device to your computer via USB cable. The device will power up and book from the SD card but the screen will not turn on. This is normal.
8. After about a minute your computer show detect the new device. This means that the rooting is complete. Your Windows computer will complain about missing drivers. This is normal.
9. Disconnect the USB cable and remove the card from the reader.
10. Power cycle it by holding the power button for 20 seconds and then releasing it. The press the power button briefly to power the reader on.
11. As the reader boots you will see a red splash screen.
12. Once the reader boots, you will be prompted for you Gmail account (as usually with Android) and some initial settings. This will only happen once.
13. As you open the extras folder you will see that it now contains Android market icon and some extras (Youtube, Gmail, etc)
14. You can now start the market app and download other apps that you like. You will need to reboot the device for apps to appear on the extras page. The apps themselves can be used right away just as with usual Android apps.

I would look for the thread in the android development section for auto nook 1.01. Update the OS to 1.01, then do the nook-ing process. Its all laid out there in the opening post.
I would definitely root your nooks to get the most out of them.

I'm guessing he meant Auto-Nooter 2.12.25 (1.0.1 Only), which the thread can be found here

I was looking for a manual method because I didn't have my card reader at work yesterday, and I couldn't get the card I wrote in my Incredible to boot Auto-Noot in 1.0.0.
Oddly enough, after deciding to upgrade to 1.0.1 first, when I tried to root the second time it worked just fine. I did the second one after upgrading, also went without a hitch. Think it just makes sense to upgrade first, seeing as they're both exploitable.

giantcrazy said:
I was looking for a manual method because I didn't have my card reader at work yesterday, and I couldn't get the card I wrote in my Incredible to boot Auto-Noot in 1.0.0.
Oddly enough, after deciding to upgrade to 1.0.1 first, when I tried to root the second time it worked just fine. I did the second one after upgrading, also went without a hitch. Think it just makes sense to upgrade first, seeing as they're both exploitable.
Click to expand...
Click to collapse
How can you write an image from your Incredible? You need to use a computer to write the "image" not just the files to the sdcard, to make it bootable.
-CC

clockcycle said:
How can you write an image from your Incredible? You need to use a computer to write the "image" not just the files to the sdcard, to make it bootable.
-CC
Click to expand...
Click to collapse
I spent some time re-inventing the wheel before I realized someone had documented the method on XDA (my fault for being search lazy):
http://forum.xda-developers.com/showthread.php?t=889001
You use the Linux DD command to write the image to the SD card, which renders it with the correct partitions and files needed to complete root. I did it yesterday, and assumed that I had either too slow a card or it didn't work, until I upgraded to 1.0.1 first and it worked at first crack. Just take care to write the card with the correct device name, mmcblk1.
I used GParted on Linux to double-check after doing my fdisk, everything looked kosher to me and it worked flawlessly.

giantcrazy said:
I spent some time re-inventing the wheel before I realized someone had documented the method on XDA (my fault for being search lazy):
http://forum.xda-developers.com/showthread.php?t=889001
You use the Linux DD command to write the image to the SD card, which renders it with the correct partitions and files needed to complete root. I did it yesterday, and assumed that I had either too slow a card or it didn't work, until I upgraded to 1.0.1 first and it worked at first crack. Just take care to write the card with the correct device name, mmcblk1.
I used GParted on Linux to double-check after doing my fdisk, everything looked kosher to me and it worked flawlessly.
Click to expand...
Click to collapse
Ah, totally forgot about that.. Well glad you got it sorted.
-CC

[Q] Root method for 1.4.3?

I apologize if this has been answered already. I did read the 2 threads involving the 1.4.3 update, but did not get a clear answer.
Can I use the same method I used when I rooted NC running 1.4.2? (clockworkmod 3.2.0.1 and manualnooter 5.02.19)
I also installed the kernel. I have all this info on my PC, saved from my SD card. I misplaced my SD card and thankfully saved all the info on it. I have a new card and am ready to try this root. Can you also offer any info on blocking OTA updates? I tried that once before (2 updates ago) and it didn't work.
I hope I conveyed this clearly. I am ready to scream with the B & N update nightmare!!
Thanks for any help~

I am also trying to root my nook color, 1.4.3. it's not rooted.. it is stock, but it has been rooted in the past. the NC 1.4.3 will not boot CWM or TWRP bootable sd cards. looking for some advice.

I was rooted on 1.4.2 when I got OTA update to 1.4.3. I used the same tools and utilities to root it again without any issues. And this time I blocked the OTA updates.
Here are the instructions I followed both times.
http://forum.xda-developers.com/showthread.php?t=1438212

I understand being previously rooted but I was not previously rooted. The nc simply will not boot from the cwm sd. I don't know how to proceed with any steps without this critical step.

linwiz, try going back to stock and loading 1.4.2 and root from there...

linwiz said:
I understand being previously rooted but I was not previously rooted. The nc simply will not boot from the cwm sd. I don't know how to proceed with any steps without this critical step.
Click to expand...
Click to collapse
It could be your CWM card. Look at my tips thread linked in my signature to find out why some cards do not boot. I also have a new version there you can try.

Where can I get a copy of 1.4.2?
Want to go back to 1.4.2 and then use my already prepared SD card to re-root.

I am going to retry with the 5.5.0.4 "new" sd image. in the mean time, how do i load 1.4.2 once my nook is completely factory/stock? i tried to load 1.4.1 like i would do on a official b&n update, but it just erases the file.
edit: i could not get that sd image to work either. i am following the same steps as I used to root in the past. im using the same sd card and card reader. i honestly think b&n might have done something horrible in 1.4.3 to block us.
edit: after several attempts at resetting, my nc says its 1.2.0 now. but yet it still goes from off to "read forever". i dont know whats going on any more.
edit: I am now sitting with a stock 1.4.1 nc and it still wont boot from sd. i dont know how many times i've burned different sd images to 3 different sd cards and nothing will boot.
edit: i decided to try windows instead of linux to burn the image, worked first shot.

How to turn off OTA?
yelloguy said:
I was rooted on 1.4.2 when I got OTA update to 1.4.3. I used the same tools and utilities to root it again without any issues. And this time I blocked the OTA updates.
Here are the instructions I followed both times.
http://forum.xda-developers.com/showthread.php?t=1438212
Click to expand...
Click to collapse
Hey guys, how do I turn off the stupid OTAs???
Thanks!

I got this from the B&N Nook board. Sorry I can't give props to who posted it, or the link.
I already had Root Explorer but had to buy a SQL Lite Editor to edit the registry...both are worth it...
********************
You can do this to block OTA updates:
Download Root Explorer from the play store....its not free but its worth it.
Open Root Explorer:
Tap on Data
Tap on Data
Tap on com.bn.devicemanager.
Tap on databases
Tap on devicemanager.db
Tap on registry
Turn to go to landscape mode (should look like a spread sheet)
Go to com.bn.device.fota.mode and look over to the "value" column. It should say auto or automatic.
Long touch on Auto and choose "edit fields".
Change Auto to Manual and hit save.

Thank you so much!!!

josepha24 said:
I apologize if this has been answered already. I did read the 2 threads involving the 1.4.3 update, but did not get a clear answer.
Can I use the same method I used when I rooted NC running 1.4.2? (clockworkmod 3.2.0.1 and manualnooter 5.02.19)
I also installed the kernel. I have all this info on my PC, saved from my SD card. I misplaced my SD card and thankfully saved all the info on it. I have a new card and am ready to try this root. Can you also offer any info on blocking OTA updates? I tried that once before (2 updates ago) and it didn't work.
I hope I conveyed this clearly. I am ready to scream with the B & N update nightmare!!
Thanks for any help~
Click to expand...
Click to collapse
Yes you can use the same method when rooting 1.4.2. You can also create a Stock Rom 1.4.3 w/ CWM on it by following the instructions here. This will also disable OTA Updates AFAIK.

Root the nook verison 1.4.3
linwiz said:
I am going to retry with the 5.5.0.4 "new" sd image. in the mean time, how do i load 1.4.2 once my nook is completely factory/stock? i tried to load 1.4.1 like i would do on a official b&n update, but it just erases the file.
edit: i could not get that sd image to work either. i am following the same steps as I used to root in the past. im using the same sd card and card reader. i honestly think b&n might have done something horrible in 1.4.3 to block us.
edit: after several attempts at resetting, my nc says its 1.2.0 now. but yet it still goes from off to "read forever". i dont know whats going on any more.
edit: I am now sitting with a stock 1.4.1 nc and it still wont boot from sd. i dont know how many times i've burned different sd images to 3 different sd cards and nothing will boot.
edit: i decided to try windows instead of linux to burn the image, worked first shot.
Click to expand...
Click to collapse
I have the color nook version 1.4.3 can you put up the directions on how i can root it its possible. Thanks

rooting instructions are at:
http://forum.xda-developers.com/showthread.php?t=1494901

[Q] Opening a new HD+ on Christmas, but want Google Apps. Where am I at?

I'm new to the Nook scene, but I've read the someone/leapinlear threads on rooting/putting google apps on the device.
Now that 2.0.5 is out, that seems to break the above.
One of my confusions is the talk of OOBE ( a new acronym for me to learn. )
Is it possible for me to open the Nook HD+ on xmas morning, and play with it without registering/updating?
Does the Nook force you to connect to wifi? What if I had no wifi?
If I can play with it without registering/updating, then use the current rooting methods later in the afternoon ... will that stop 2.0.5?
Do I need to read more?

curiousmike said:
I'm new to the Nook scene, but I've read the someone/leapinlear threads on rooting/putting google apps on the device.
Now that 2.0.5 is out, that seems to break the above.
One of my confusions is the talk of OOBE ( a new acronym for me to learn. )
Is it possible for me to open the Nook HD+ on xmas morning, and play with it without registering/updating?
Does the Nook force you to connect to wifi? What if I had no wifi?
If I can play with it without registering/updating, then use the current rooting methods later in the afternoon ... will that stop 2.0.5?
Do I need to read more?
Click to expand...
Click to collapse
You said you read my thread. Yes you can do the xmas thing by skipping OOBE ( look in my thread for how to do it). Which basically means skipping registration. And you don't have to turn on wifi so that it updates itself. But you do have to turn on wifi to register and you can do nothing with it without either registering or skipping OOBE. But it may be kind of not much fun without apps, books and wifi. I also just posted a new way to have an old version and still register. But you might want to wait to see if other users do ok with it.
Sent from my HD+ rooted stock using Tapatalk

leapinlar said:
Yes you can do the xmas thing by skipping OOBE ( look in my thread for how to do it).
Click to expand...
Click to collapse
Found it and read it. Great.
leapinlar said:
But it may be kind of not much fun without apps, books and wifi
Click to expand...
Click to collapse
Agreed.
But I also don't want to do the update and risk never being able to root it and get Google App Store on it; I have a large array of apps/games for my phone that I'm hoping will work on the HD+.

You can immediately boot straight to CM10 without registering if you'd like. That's exactly what I did, and it has worked flawlessly.

OOBE, known as Out-of-Box-Experience. Basically after registering, you get the experience you should. Skipping OOBE is basically not registering the product, and entering a development/test mode. OOBE is associated with not registering the device.
The Nook HD+ requires a WiFi connection to register the product, and what if the end-user doesn't have WiFi? I guess that's tough on them, they can't register. To be honest, I can't believe it either. To use the HD+ if you do not have WiFi, is to skip OOBE (which is the same procedure as the Nook Color's).
If you skip OOBE, then there is nothing to play with on the tablet; other than familiarising yourself with the interface. That's it. Not even the browser works; actually it has no apps at all. If you later root the tablet [and install GAPPs], whilst not registering the tablet, you will eventually get a lot more features; and pretty much use it like any other Android tablet. However, a lot of features will be disabled, such as the stock Android Browser (it will not load, as it will not be installed). A lot of other apps may then cause problems, due to the default browser not being present (i.e. BBC iPlayer). With the All in One root, developed by someone0, it will disable automatic OTA updates, so you will not update any further than your current factory version. However, some users (including myself) have been forced the update, so you cannot be certain that you will remain on the factory version (those prior to 2.0.5).
However, I would recommend you reconsider your options. If you want a better experience, I would recommend that you register the device (do NOT register now, please read the rest of my post). Important, remember the credentials you register the device with. If there are any future updates for the Nook, you will need to input the same e-mail address and password (unless password changed). If you create another B&N account at this stage, your Nook will constantly output an error; I contacted B&N today, and they couldn't solve it either. I found the solution, you have to remember the exact e-mail address you used to register. So, remember the e-mail address you use to register; and absolutely the password too, or the security question. Without them, you will not be able to register your device again.
Continuing on, I stated I would recommend you to register the device. However, before you do so, please make sure you have a minimum 4GB microSD card present (I used a SanDisk 4GB class 4). When you register your device, your Nook will check for updates. It will find 2.0.5 and update to it. Just so you know, someone0 and leapinlar have worked together to bring a "Universal Root" for the Nook HD+ and that universal root even roots version 2.0.5 (thank you someone0 and leapinlar; I'm currently using it). After registering your device, you will be introduced to your Nook interface. It's empty, even the apps are pretty much useless (except for Browser, only positive); you can't even spend more than 10 minutes on it, without enjoying what your doing. So I would recommend the root + GAPPs to unlock most of the "Android" features. To use the universal root, you'll need to boot into CWM (ClockWorkMod) via SD card (minimum of 4GB, anything less won't be detected/viable). Before registering and continuing with what I say, please make sure you are able to write onto your SD card using your computer. Although we are using CWM, we are NOT going to flash any ROMs (unless you want to of course, but the following "guide" below won't detail so).
First, you'll need to insert your SD card into your computer; where you're in a position where you can write on the card. (Files links/sources/information was sourced from http://forum.xda-developers.com/showthread.php?t=2062613)
Write the CWM .img (NookHD+bootable-CWM-6023-for-emmc-stock-4GB.zip) onto the SD Card using "Win32diskimager in Windows or use the dd command in Linux or OSX".
Download NookHD+Universal-Root.zip and place it within the SD Card. Also do this for the GAPPS + EXTRAS (including ManualOTA and Unknown Sources) .zip file, which you can download here (put together by leapinlar). DO NOT extract the .zip, just place them into the SD card.
At this point, make sure you have registered your Nook HD+, updated and installed version 2.0.5. Also make sure you have launched the stock ROM at least once (i.e. turned on the device into the Nook software/modified Android OS).
Now, turn off your device (hold the power button until a message is displayed on screen, and press shut down, or similar on screen). At the bottom of the Nook, on the left of the charging port, there is a cover protecting the SD card slot. Take it out (not all the way, it's attached to the body), and place in your SD card (with the CWM and universal root, as well optionally the GAPPS; although recommend installed on the SD card).
With the SD card in, turn your Nook on. After a few seconds, you should load into CWM. Select the option "install .zip from SD card" (use volume up/down to move across the list, "n" button below screen to select, and power button to move up one menu).
Firstly, install "NookHD+Universal-Root.zip". Wait for it to fully install, then install the GAPPS + Extras.
After the last step, reboot your device and take out the SD card before reboot. You should now load into your stock OS, whilst being rooted and and GAPPs installed on version 2.0.5. Success!
After the above guide, I would personally recommend Nova Launcher Prime; it unleashes the full experience of Android for me anyway. Haha, from now it's all yours.
That should be all from me, and the best of luck. I support you either way, whether you register or not. Merry Christmas too by the way.

HiddenG said:
OOBE, known as Out-of-Box-Experience.
That should be all from me, and the best of luck. I support you either way, whether you register or not. Merry Christmas too by the way.
Click to expand...
Click to collapse
Fantastic; I happen to have a 4GB card and I'm writing out the .img as I type.
Merry Christmas to you.

Yea, I probably taking a day off from xda forum tomorrow, so enjoy guys.
leapinlar deserves most of the credits since he is doing all the scripting and testing. All I did was giving him ideas(good and bad).

Ahh.. CuriousMike, from BARF, right?
Small world. Let me reemphasize that if you immediately throw in the CM10 install, you can totally skip the registration step. You essentially boot around it, and the next time the device boots without the CM10 SD card plugged in, if you so choose, it will be like opening it up fresh out of the box, with the nook asking you to register and so on.
If you *just* want a full android tablet, the CM10 SD is by far the way to go. Odds are your Xmas wrapped nook doesn't yet have 2.0.5 installed. You should be able to jump straight into CM10 and avoid the current mess of trying to preserve root, avoiding updates, working around the B & N interface and so on. It doesn't mean you can't do that at a later date, but right now CM10 seems to be a much better option than trying to deal with the B&N interface. Best part is that you can continually boot right off that SD card and never have to worry about dodging updates.
I'd recommend it above the current alternative of trying to root and apply fixes to have a usable tablet.

KestrelYI said:
Ahh.. CuriousMike, from BARF, right?
Small world. Let me reemphasize that if you immediately throw in the CM10 install, you can totally skip the registration step. You essentially boot around it, and the next time the device boots without the CM10 SD card plugged in, if you so choose, it will be like opening it up fresh out of the box, with the nook asking you to register and so on.
If you *just* want a full android tablet, the CM10 SD is by far the way to go. Odds are your Xmas wrapped nook doesn't yet have 2.0.5 installed. You should be able to jump straight into CM10 and avoid the current mess of trying to preserve root, avoiding updates, working around the B & N interface and so on. It doesn't mean you can't do that at a later date, but right now CM10 seems to be a much better option than trying to deal with the B&N interface. Best part is that you can continually boot right off that SD card and never have to worry about dodging updates.
I'd recommend it above the current alternative of trying to root and apply fixes to have a usable tablet.
Click to expand...
Click to collapse
I guess we can disagree on that. The way I see it, doing Skip OOBE and then root it would be more stable than CM10. A lot of things still not working yet on CM10. So, I decided to stick w/ stock for my personal use. Considering there is universal root for 2.0.5 now also, it's possible to be on 2.0.5 and still get root+gapps. I guess it could just end up being what do you need it for.

my nook is up
posting this from the nook, using firefox! surprising that chrome comes up as not-compatible.
i've got a few of my play store apps already installed... looking good.
i bought nova-launcher for 0.25$ during googles last big sale, so i'm using that. the experience is androidy-enough.
word-hero is also incompatible... that will push me to "cm10" when it's compatibler-er.

My Nook HD+ came out of the box with 2.0.2 and hasn't updated to 2.0.5 after a couple hours of use. Tried a couple times to do a manual update and says no updates available. ??

Will this work, on my registered device? I have it all setup and working on205, but want gapps too.
Thanks,
Steve

piperman7 said:
Will this work, on my registered device? I have it all setup and working on205, but want gapps too.
Thanks,
Steve
Click to expand...
Click to collapse
It worked for me, just as described.

That sounds good, I just picked up a 8gb class 10 to use.
Thanks again,
Steve

HiddenG said:
OOBE, known as Out-of-Box-Experience. Basically after registering, you get the experience you should. Skipping OOBE is basically not registering the product, and entering a development/test mode. OOBE is associated with not registering the device.
The Nook HD+ requires a WiFi connection to register the product, and what if the end-user doesn't have WiFi? I guess that's tough on them, they can't register. To be honest, I can't believe it either. To use the HD+ if you do not have WiFi, is to skip OOBE (which is the same procedure as the Nook Color's).
If you skip OOBE, then there is nothing to play with on the tablet; other than familiarising yourself with the interface. That's it. Not even the browser works; actually it has no apps at all. If you later root the tablet [and install GAPPs], whilst not registering the tablet, you will eventually get a lot more features; and pretty much use it like any other Android tablet. However, a lot of features will be disabled, such as the stock Android Browser (it will not load, as it will not be installed). A lot of other apps may then cause problems, due to the default browser not being present (i.e. BBC iPlayer). With the All in One root, developed by someone0, it will disable automatic OTA updates, so you will not update any further than your current factory version. However, some users (including myself) have been forced the update, so you cannot be certain that you will remain on the factory version (those prior to 2.0.5).
However, I would recommend you reconsider your options. If you want a better experience, I would recommend that you register the device (do NOT register now, please read the rest of my post). Important, remember the credentials you register the device with. If there are any future updates for the Nook, you will need to input the same e-mail address and password (unless password changed). If you create another B&N account at this stage, your Nook will constantly output an error; I contacted B&N today, and they couldn't solve it either. I found the solution, you have to remember the exact e-mail address you used to register. So, remember the e-mail address you use to register; and absolutely the password too, or the security question. Without them, you will not be able to register your device again.
Continuing on, I stated I would recommend you to register the device. However, before you do so, please make sure you have a minimum 4GB microSD card present (I used a SanDisk 4GB class 4). When you register your device, your Nook will check for updates. It will find 2.0.5 and update to it. Just so you know, someone0 and leapinlar have worked together to bring a "Universal Root" for the Nook HD+ and that universal root even roots version 2.0.5 (thank you someone0 and leapinlar; I'm currently using it). After registering your device, you will be introduced to your Nook interface. It's empty, even the apps are pretty much useless (except for Browser, only positive); you can't even spend more than 10 minutes on it, without enjoying what your doing. So I would recommend the root + GAPPs to unlock most of the "Android" features. To use the universal root, you'll need to boot into CWM (ClockWorkMod) via SD card (minimum of 4GB, anything less won't be detected/viable). Before registering and continuing with what I say, please make sure you are able to write onto your SD card using your computer. Although we are using CWM, we are NOT going to flash any ROMs (unless you want to of course, but the following "guide" below won't detail so).
First, you'll need to insert your SD card into your computer; where you're in a position where you can write on the card. (Files links/sources/information was sourced from http://forum.xda-developers.com/showthread.php?t=2062613)
Write the CWM .img (NookHD+bootable-CWM-6023-for-emmc-stock-4GB.zip) onto the SD Card using "Win32diskimager in Windows or use the dd command in Linux or OSX".
Download NookHD+Universal-Root.zip and place it within the SD Card. Also do this for the GAPPS + EXTRAS (including ManualOTA and Unknown Sources) .zip file, which you can download here (put together by leapinlar). DO NOT extract the .zip, just place them into the SD card.
At this point, make sure you have registered your Nook HD+, updated and installed version 2.0.5. Also make sure you have launched the stock ROM at least once (i.e. turned on the device into the Nook software/modified Android OS).
Now, turn off your device (hold the power button until a message is displayed on screen, and press shut down, or similar on screen). At the bottom of the Nook, on the left of the charging port, there is a cover protecting the SD card slot. Take it out (not all the way, it's attached to the body), and place in your SD card (with the CWM and universal root, as well optionally the GAPPS; although recommend installed on the SD card).
With the SD card in, turn your Nook on. After a few seconds, you should load into CWM. Select the option "install .zip from SD card" (use volume up/down to move across the list, "n" button below screen to select, and power button to move up one menu).
Firstly, install "NookHD+Universal-Root.zip". Wait for it to fully install, then install the GAPPS + Extras.
After the last step, reboot your device and take out the SD card before reboot. You should now load into your stock OS, whilst being rooted and and GAPPs installed on version 2.0.5. Success!
After the above guide, I would personally recommend Nova Launcher Prime; it unleashes the full experience of Android for me anyway. Haha, from now it's all yours.
That should be all from me, and the best of luck. I support you either way, whether you register or not. Merry Christmas too by the way.
Click to expand...
Click to collapse
Just got my Nook HD+ for Christmas, 1st Android device. I followed the above instructions to root it, after reboot it is just sitting at the first nook screen. It's been about 15 minutes or so, should I manually reboot the device or wait longer? Is it possible it just needs to be redone? The only odd thing I can across was after selecting reboot it said "ROM may flash stock recovery on reboot", should i have selected Yes/No, Should I backup the stock ROM?
Thanks for all the Help

curiousmike said:
posting this from the nook, using firefox! surprising that chrome comes up as not-compatible.
i've got a few of my play store apps already installed... looking good.
i bought nova-launcher for 0.25$ during googles last big sale, so i'm using that. the experience is androidy-enough.
word-hero is also incompatible... that will push me to "cm10" when it's compatibler-er.
Click to expand...
Click to collapse
Glad you got your tablet working with GAPPs! Hope it's all good; of course it's much better than sticking to B&N's book reader, haha. Indeed yes, I can't believe that a few apps in Google Play are not compatible either; although as suggested, sideloading them often work fine. :laugh:
mzjc said:
My Nook HD+ came out of the box with 2.0.2 and hasn't updated to 2.0.5 after a couple hours of use. Tried a couple times to do a manual update and says no updates available. ??
Click to expand...
Click to collapse
Did you skip the OOBE? The registration process of the device? If so, this problem could occur. If not, and you're registered then no problem either. If you're truly stuck on 2.0.2, that could be seen as a benefit; as your roots would never be broken, due to no future updates. If you'd like to root and place GAPPs on your tablet, I'd recommend you follow someone0's all-in-one guide. someone0's allinone will root your Nook HD+, install GAPPs, manual OTA and installation from Unknown Sources; provided your HD+ is on version 2.0.0 to 2.0.4, where you are eligible. This rooting method provides the exact same end-result as the 2.0.5 root, and is no different in performance or usability; they're exactly the same, just different installation process.
I've not tested it, but you may use the same rooting process as I've described on the last page; since the rooting method is universal. However, I have not tested it, other than on version 2.0.5. You'll also need a microSD card for this process, so I'd just recommend the adb-allinone method by someone0.
Best of luck.
ifdwolf2008 said:
Just got my Nook HD+ for Christmas, 1st Android device. I followed the above instructions to root it, after reboot it is just sitting at the first nook screen. It's been about 15 minutes or so, should I manually reboot the device or wait longer? Is it possible it just needs to be redone? The only odd thing I can across was after selecting reboot it said "ROM may flash stock recovery on reboot", should i have selected Yes/No, Should I backup the stock ROM?
Thanks for all the Help
Click to expand...
Click to collapse
First Android device? Haha, hopefully it'll make a good impression after rooting and GAPPS. Sorry about the wait. Once you've loaded/rebooted into the Nook HD+ after CWM/rooting/GAPPS etc, press the "n" button below the screen. You should be given the option to select a launcher; temporarily select ZeamLauncher and set it as default action. After that, you should be good to go. Personally, I would recommend Nova Launcher Prime instead of ZeamLauncher. If you'd like, you can download the free version of Nova Launcher from Google Play (I would recommend it strongly over ZeamLauncher). It should provide you a better "Android-experience".
If pressing the 'n' button below the screen did nothing, then you can try the rooting process again. Also selecting yes, or no shouldn't make a difference during reboot; "ROM may flash stock recovery on reboot". You may backup your stock ROM if you feel necessary, but it's not absolutely essential (if you ever run into problems, you can force the tablet to fail booting 8 times, and the tablet will automatically restore to factory defaults). If you have further problems, please reply.
Best of luck.

Boom, thanks for the help, working like a champ now! Does the mic feature in nova require chrome? Gonna side load it now. Device is much better rooted, big thanks all to all envolved!
Sent from my BNTV600 using xda app-developers app

Hey folks. I'm having some issues with the "Root your device with a bootable microSD card" method. I followed the instructions precisely.. wrote the image to a 32 GB microSD (I don't own any 4 GB cards).. and my nook REFUSES to even see the card nor boot from it for that matter.. just goes straight to the registration screen every time. Is there something that I could perhaps be missing here...? or is it that I MUST have a 4 GB card (and no bigger)?? (the microSD is the cream of the crop Sandisk 32 GB class 10 model. I couldn't resist picking one up, as they were on sale for only $26 at the time.
My HD+ is a pretty paperweight at the moment, and I'd love to get it back up and running. I really don't want to do the "all in one" method, as it keeps you in "TEST" mode.. which bugs the crap outta me.

What am I missing?!
HiddenG said:
OOBE, known as Out-of-Box-Experience. Basically after registering, you get the experience you should. Skipping OOBE is basically not registering the product, and entering a development/test mode. OOBE is associated with not registering the device.
The Nook HD+ requires a WiFi connection to register the product, and what if the end-user doesn't have WiFi? I guess that's tough on them, they can't register. To be honest, I can't believe it either. To use the HD+ if you do not have WiFi, is to skip OOBE (which is the same procedure as the Nook Color's).
If you skip OOBE, then there is nothing to play with on the tablet; other than familiarising yourself with the interface. That's it. Not even the browser works; actually it has no apps at all. If you later root the tablet [and install GAPPs], whilst not registering the tablet, you will eventually get a lot more features; and pretty much use it like any other Android tablet. However, a lot of features will be disabled, such as the stock Android Browser (it will not load, as it will not be installed). A lot of other apps may then cause problems, due to the default browser not being present (i.e. BBC iPlayer). With the All in One root, developed by someone0, it will disable automatic OTA updates, so you will not update any further than your current factory version. However, some users (including myself) have been forced the update, so you cannot be certain that you will remain on the factory version (those prior to 2.0.5).
However, I would recommend you reconsider your options. If you want a better experience, I would recommend that you register the device (do NOT register now, please read the rest of my post). Important, remember the credentials you register the device with. If there are any future updates for the Nook, you will need to input the same e-mail address and password (unless password changed). If you create another B&N account at this stage, your Nook will constantly output an error; I contacted B&N today, and they couldn't solve it either. I found the solution, you have to remember the exact e-mail address you used to register. So, remember the e-mail address you use to register; and absolutely the password too, or the security question. Without them, you will not be able to register your device again.
Continuing on, I stated I would recommend you to register the device. However, before you do so, please make sure you have a minimum 4GB microSD card present (I used a SanDisk 4GB class 4). When you register your device, your Nook will check for updates. It will find 2.0.5 and update to it. Just so you know, someone0 and leapinlar have worked together to bring a "Universal Root" for the Nook HD+ and that universal root even roots version 2.0.5 (thank you someone0 and leapinlar; I'm currently using it). After registering your device, you will be introduced to your Nook interface. It's empty, even the apps are pretty much useless (except for Browser, only positive); you can't even spend more than 10 minutes on it, without enjoying what your doing. So I would recommend the root + GAPPs to unlock most of the "Android" features. To use the universal root, you'll need to boot into CWM (ClockWorkMod) via SD card (minimum of 4GB, anything less won't be detected/viable). Before registering and continuing with what I say, please make sure you are able to write onto your SD card using your computer. Although we are using CWM, we are NOT going to flash any ROMs (unless you want to of course, but the following "guide" below won't detail so).
First, you'll need to insert your SD card into your computer; where you're in a position where you can write on the card. (Files links/sources/information was sourced from http://forum.xda-developers.com/showthread.php?t=2062613)
Write the CWM .img (NookHD+bootable-CWM-6023-for-emmc-stock-4GB.zip) onto the SD Card using "Win32diskimager in Windows or use the dd command in Linux or OSX".
Download NookHD+Universal-Root.zip and place it within the SD Card. Also do this for the GAPPS + EXTRAS (including ManualOTA and Unknown Sources) .zip file, which you can download here (put together by leapinlar). DO NOT extract the .zip, just place them into the SD card.
At this point, make sure you have registered your Nook HD+, updated and installed version 2.0.5. Also make sure you have launched the stock ROM at least once (i.e. turned on the device into the Nook software/modified Android OS).
Now, turn off your device (hold the power button until a message is displayed on screen, and press shut down, or similar on screen). At the bottom of the Nook, on the left of the charging port, there is a cover protecting the SD card slot. Take it out (not all the way, it's attached to the body), and place in your SD card (with the CWM and universal root, as well optionally the GAPPS; although recommend installed on the SD card).
With the SD card in, turn your Nook on. After a few seconds, you should load into CWM. Select the option "install .zip from SD card" (use volume up/down to move across the list, "n" button below screen to select, and power button to move up one menu).
Firstly, install "NookHD+Universal-Root.zip". Wait for it to fully install, then install the GAPPS + Extras.
After the last step, reboot your device and take out the SD card before reboot. You should now load into your stock OS, whilst being rooted and and GAPPs installed on version 2.0.5. Success!
After the above guide, I would personally recommend Nova Launcher Prime; it unleashes the full experience of Android for me anyway. Haha, from now it's all yours.
That should be all from me, and the best of luck. I support you either way, whether you register or not. Merry Christmas too by the way.
Click to expand...
Click to collapse
Hey there. I followed your directions EXACTLY as posted. I didn't have a 4 GB microSD, but I DID have a 32 GB class 4. I used that. Long story short, the nook will NOT "see" nor boot from said microSD no matter what I do. Is there some sort of button combo I need to be doing while the nook HD+ is turning on to see the sd card? I'm totally lost on this.
Thanks in advance for your help!!
If you'd like to PM me, that way my email will notify me when a response has been received, I'd REALLY appreciate it! Thanks for all your hard work!

The one difference might be that I did the whole oobe; I registered the nook... I rebooted twice to the stock Os (somewhere I read that you had to reboot once after setting up bn account.) I don't know if that's your issue, but it's what I did and I'm running gapps.
Sent from my SPH-L710 using Tapatalk 2

[Q] Cannot Flash To Repair, Boot Loops and Deleted SD card

Greetings, developers and friends!
My Touchpad is now stuck in a continuous boot, with Android backed up in Clockworkmod but I tried restoring and didn't work. A couple of days ago I deleted info on my SD card because it was too bogged down and didn't let me update anything. I did my best but I decided to do this,so I own it. Attempted to flash with Roland's video instructions and got all my files in order: Problem is, on the command prompt I get a message of "Device Not Recognized.
Here's what I see when booting:
Moboot 0. 3. 8
HP logo
boot ClockworkMod
boot Cyanogenmod
boot WebOS
boot webOS Recovery
reboot
shutdown
Then the screen goes light dark, as if the animation of CyanogenMod is going to be up and running but it doesn't. Is there a remedy to fix the SD card problem, maybe that will take care of it and my laptop can see the TouchPad? Backup works fine on ClockworkMod, restore does too but nothing happens.
Any takers? I have another HP tablet that I will not mess with, but I'd rather have both running Android.
Thanks,
chicawhyte

chicawhyte said:
Greetings, developers and friends!
My Touchpad is now stuck in a continuous boot, with Android backed up in Clockworkmod but I tried restoring and didn't work. A couple of days ago I deleted info on my SD card because it was too bogged down and didn't let me update anything. I did my best but I decided to do this,so I own it. Attempted to flash with Roland's video instructions and got all my files in order: Problem is, on the command prompt I get a message of "Device Not Recognized.
Here's what I see when booting:
Moboot 0. 3. 8
HP logo
boot ClockworkMod
boot Cyanogenmod
boot WebOS
boot webOS Recovery
reboot
shutdown
Then the screen goes light dark, as if the animation of CyanogenMod is going to be up and running but it doesn't. Is there a remedy to fix the SD card problem, maybe that will take care of it and my laptop can see the TouchPad? Backup works fine on ClockworkMod, restore does too but nothing happens.
Any takers? I have another HP tablet that I will not mess with, but I'd rather have both running Android.
Thanks,
chicawhyte
Click to expand...
Click to collapse
UPDATE: Was able to get through the Android removal, but it bothers me that one of the scrolling messages says, "no cminstall dir found, nothing to install.

chicawhyte said:
UPDATE: Was able to get through the Android removal, but it bothers me that one of the scrolling messages says, "no cminstall dir found, nothing to install.
Click to expand...
Click to collapse
TouchPad toolbox will solve it.

Moody66 said:
TouchPad toolbox will solve it.
Click to expand...
Click to collapse
Where is the Toolbox? Looked in Preware, Just Type and everywhere else and I can't find it. Thanks.

Found it on another thread, printed it out. Will take care of this after work. Thanks.
chicawhyte

chicawhyte said:
Found it on another thread, printed it out. Will take care of this after work. Thanks.
chicawhyte
Click to expand...
Click to collapse
It didn't work....aborted.... :crying:

It didn't, it aborted. I tried Roland's way and attempted to flash it but still the message is the same, no cminstall dir, power off when ready. Let me see if I can get a hold of him or JC (it'd be incredibly lucky for me) I hope my tablet can get the Android back.

Roland asked me about this, this is my reply. Feel free to help out.
chicawhyte said:
It didn't, it aborted. I tried Roland's way and attempted to flash it but still the message is the same, no cminstall dir, power off when ready. Let me see if I can get a hold of him or JC (it'd be incredibly lucky for me) I hope my tablet can get the Android back.
Click to expand...
Click to collapse
+Roland Deschain Ok Roland, what I have tried was to gain more memory on my tablet; there were several apps deleted, cached space, did all I could because I had an update via Goo.im. I tried to flash it but I was not successful; asides from that, there were automatic updates that the Touchpad did not allow due to low storage space.That is when I made the serious mistake of deleting the SD card.
I tried to uninstall according to your instructions and then load up the 5M to go back to full throttle, but for whatever reason when the scroll happened the messages were off-key, meaning that folders and files were not installed and not the usual way. That's when I realized there was trouble; I had made two Nandroid backups that are still in the Touchpad. I had only WebOS and no Android to be seen. I restored the most recent backup via ROM Manager and I thought that that would do the trick, still no Android (?).
I decided to try and reach out to my fellows at XDA-Developers because I try everything before I go to the forum; I know the rules there. That's when I was made aware of the Toolbox by JC Sullins and I downloaded it. Followed the instructions hoping to install Android that way but it didn't go past 3 seconds of Step 1. That's when I get the message(s) that there's nothing to install and cuts off.
I am aware of a way to format the SD card (if that is the problem) but for that stuff I need specific instructions, like here, to do so. I have another TouchPad 32 GB that I performed a double-boot as you instructed us to do; what I need is some specific cause(s) and what to do because the idea of wiping everything including WebOS, using WebOS Doctor to reinstall it and then Android does not appeal to me. I want to get to the bottom of it, I like to figure this stuff out and do it myself
Thanks for your work and for helping us turn a good tablet into the best tablet around!

Greetings,
Please read below my message to Roland and my problem below/wanted to add that now on both computers (my laptop where I do the flashes) and my husband's where I copied the Palm, Inc. folder to attempt Android there-the message I get is that "there is no hardware found" on the command prompt.

Please try to follow the instructions and explain things when requested
chicawhyte said:
Hello Roland, help!!!!! Please read this thread and let me know if I have to wipe everything and restart from scratch with WebOS Doctor. Here's the thread from xda-developers: http://forum.xda-developers.com/hp-...r-boot-loops-deleted-sd-t2803190/post53886856. Runs WebOS fine, but no Android to be seen; files are there but it won't let me format the whole tablet. Thanks!
Click to expand...
Click to collapse
RolandDeschain79 said:
"Hey so I took a look but that just tells me you're confused and trying to follow multiple sets of instructions. Can you list what you've tried and where you get stuck. There's no cminstall folder in this set of instructions its a ttinstall folder. Did you complete the first steps of uninstalling android and wiping the USB drive?"
Click to expand...
Click to collapse
chicawhyte said:
+Roland Deschain Ok Roland, what I have tried was to gain more memory on my tablet; there were several apps deleted, cached space, did all I could because I had an update via Goo.im. I tried to flash it but I was not successful; asides from that, there were automatic updates that the Touchpad did not allow due to low storage space.That is when I made the serious mistake of deleting the SD card.
I tried to uninstall according to your instructions and then load up the 5M to go back to full throttle, but for whatever reason when the scroll happened the messages were off-key, meaning that folders and files were not installed and not the usual way. That's when I realized there was trouble; I had made two Nandroid backups that are still in the Touchpad. I had only WebOS and no Android to be seen. I restored the most recent backup via ROM Manager and I thought that that would do the trick, still no Android (?).
I decided to try and reach out to my fellows at XDA-Developers because I try everything before I go to the forum; I know the rules there. That's when I was made aware of the Toolbox by JC Sullins and I downloaded it. Followed the instructions hoping to install Android that way but it didn't go past 3 seconds of Step 1. That's when I get the message(s) that there's nothing to install and cuts off.
I am aware of a way to format the SD card (if that is the problem) but for that stuff I need specific instructions, like here, to do so. I have another TouchPad 32 GB that I performed a double-boot as you instructed us to do; what I need is some specific cause(s) and what to do because the idea of wiping everything including WebOS, using WebOS Doctor to reinstall it and then Android does not appeal to me. I want to get to the bottom of it, I like to figure this stuff out and do it myself
Thanks for your work and for helping us turn a good tablet into the best tablet around!
Click to expand...
Click to collapse
Please try and limit your conversation to one location. People who spam my YouTube channel and the forum with the same questions tend to get permanently banned without warning. Consider this a warning.
chicawhyte said:
......That is when I made the serious mistake of deleting the SD card.
.......I am aware of a way to format the SD card (if that is the problem) but for that stuff I need specific instructions, like here, to do so. I have another TouchPad 32 GB that I performed a double-boot as you instructed us to do; what I need is some specific cause(s) and what to do because the idea of wiping everything including WebOS, using WebOS Doctor to reinstall it and then Android does not appeal to me. I want to get to the bottom of it, I like to figure this stuff out and do it myself
Click to expand...
Click to collapse
Secondly if I ask you a question try to answer it as completely as possible. Don't tell me you made a mistake by wiping the SDcard then refuse to tell me how you did this even after I asked specifically about it. Claiming that you know how to wipe the SDcard then asking for specific instructions how to do so doesn't give me confidence in your ability. If you wiped the SDcard from a windows PC then you've made your own problem and completely ignored all the available instructions.
chicawhyte said:
. Followed the instructions hoping to install Android that way but it didn't go past 3 seconds of Step 1. That's when I get the message(s) that there's nothing to install and cuts off.
Click to expand...
Click to collapse
I'm having a very hard time understanding why you say you're stuck on step 1, which is installing novacom and backing up your data, when you're talking about step 5 installing android???
Step by step instructions have been provided and I even made a long video that reads you all the info. No one can help you to follow instructions that's up to you. Saying you didn't want to follow the instructions then asking for help is just silly. If you do not wish to change the layout of your touchpad just stick to the Non data media roms.
New Super Easy Way Guide and video available
[ROM GUIDE]How to use the TouchPad Toolbox to install Android "The Super Easy Way"(DM & Non-DM)