Related
I was reading this thread [RECOVERY] Monster RootPack 0.7 / Clockwork Recovery 3.0.0.5 SD (1.1 Compatible!). But, since I am new to this forum I couldn't post there. I hope this is the right place to ask for help.
I upgraded my NC to 1.1.0 successfully. I put Autonooter 3.0.0 on a MicroSD card. With my NC off, I inserted the card and then plugged the NC into my PC. I got a black screen for over 5 minutes. It looked like nothing was happening, so, I disconnected the NC, removed the SD card and tired to turn the NC on. No joy, it won't turn on and won't boot at all. I think my Nook is bricked. Any ideas what went wrong?
I've read some other threads about similar problems. It seems there is a fix to get it back to stock (1.1.0). I hope the Recovery thread I mentioned above is where the answer lies. But, I'm a bit confused and don't want to make any more mistakes. I only have one 4GB SD card at my disposal right now.
My questions are as follows:
1. Is my NC bricked beyond hope of recovery?
2. If I follow the procedures in this post can I get it to boot from the sd card even though it won't turn on at all?
3. What is the difference between the Rootpack and the Clockwork Recovery Image?
4. This is the confusing part. Should I download the RootPack? Or, should I download a bootable Clockwork SD card (128mb, 1gb, 2gb, 4gb, 8gb)
5. Since I only have a 4GB card, what should I choose?
6. Should I opt for 1.0.1, or 1.1.0 where it was still working.
7. Can I get all of this on one 4GB card?
8. Is there anything else I should be weary of before starting this procedure?
If i have posted this in the wrong place, I am sorry. But, I hope someone can clear things up for me. Thanks.
This is the right place to ask general questions.
1. Most certainly not.
2. Yes, using a bootable CWR SD is the way to go.
3. Totally different. The Rootpack is the name given to a package that helps you root your Nook. CWR image is a recovery image. That means you can boot to this recovery utility and apply changes to you NC (like repairing stuff, making backups, etc.).
4. An image will adapt to the drive. If you have a 4GB SD and burn (dd) a 1GB image to it, your SD will suddenly present itself as a 1GB SD. If you format it with the right tool, your SD will be 4GB again. So don't panick, if it says 1GB after burning, it's jut "adapted to the image". You haven't lost any disk space.
5. 1GB would be enough, but you can go up to 4GB image with a 4GB.. It could sometimes be a problem to apply an image which is the exact same size as the drive. I would use th 1GB, which is plenty for what you are going to do.
6. That's up to you. Both should work.
7. Yes.
8. Just read threads exhaustively before attempting anything..
So what you need to do is read threads about this CWR Bootable img to learn how to burn it to your SD.
Then, find the appropriate .zip files to flash (apply) (1.1 recovery and 1.0.1 are available in dev section.
Copy them to root of SD.
Boot with the SD Card and apply zip files from SD.
If your NC should still have problems booting, you can also apply a boot repair zip file, that you will find on my Nook Color restore to stock tread in dev..
Sam
His Rootpack wont work on 1.1.0 You should have seen that in his instructions. It will only block 1.1.0 and fake it. You need to see this thread to fix your nook. It is 100% NOT bricked, just messed up atm. You can fix it tho. Read here:
http://forum.xda-developers.com/showthread.php?t=949699
Thanks for thr quick reponse Sam. I'm at work now, but will be able to use your suggestions later this afternoon\tonight. So, if I get a 1gb CWR image on my 4gb sd card, plus the 1.1.0 zip file and put it in the root of the sd card, the Nook should boot up even though I can't turn it on now? How long typacally will it take to boot up? What should I expect to see?
I will post results after I try the procedure. Thanks again!!
Thanks Thiboi69. I have printed out the instructions from the link you sent and will follow them to the T. I'll post results later.
It will work. I have never heard of a 100%bricked NookColor to date. And I have read 1,000's of posts here over the past 4 months. IT is just your boot partition that is messed up and B&N made it check the sdcard first for a Boot partition, then fall back to eMMC. Thank you B&N !!!
I downloaded all the files, wrote them to my sd card, and put it in the Nook. When I connected the Nook to my pc, I got a messaage the the battery was too low to turn on. So, I took the sd card out, and put the Nook on charge. After a while, it turned on, booted up and when I checked my OS, I found that I had
version 1.1.0. Apparently, my attempt to root with autonooter 3, never got installed, partially or completely. And, my battery probably got to low to turn the nook on. So, I didn't need to use CWR after all. I apologize to all who have tried to help me. But, all replies were good and contained useful info.
Now, my question is: Should I try to use Autonooter 3 again, or is there an easier
(more foolproof) way to root v1.1.0?
I just got a nook last night with the sole intention of hacking it - and did so in a matter of minutes. Autonooter couldnt be easier! When you get to the part of putting the SD card in the nook and connecting it to USB to make it boot, just plug it in and go get a cup of coffee. Don't unplug or touch anything until it boots up by itself. At 1st I thought it wasn't doing anything as I didn't see a clockwork mod screen come up or anything, but just be patient and it'll tell you when it's done. Just make sure it's pretty well charged when you do it - mine was about 80% or so.
Honestly after less than a day of the rooted stock 2.1 Eclair OS, I'm ready to drop a fully customized Froyo or Gingerbread image on this thing. Autonooter it 1st and run it for a few days 1st and see what you think. I'm still learning the ins and outs of tinkering with this thing, but so far it seems much easier than the Epic and Moment I've been beating on. Seems pretty well unbrickable too thanks to the boot to SD 1st option B&N baked into this puppy.
jostarr said:
I was reading this thread [RECOVERY] Monster RootPack 0.7 / Clockwork Recovery 3.0.0.5 SD (1.1 Compatible!). But, since I am new to this forum I couldn't post there. I hope this is the right place to ask for help.
I upgraded my NC to 1.1.0 successfully. I put Autonooter 3.0.0 on a MicroSD card. With my NC off, I inserted the card and then plugged the NC into my PC. I got a black screen for over 5 minutes. It looked like nothing was happening, so, I disconnected the NC, removed the SD card and tired to turn the NC on. No joy, it won't turn on and won't boot at all. I think my Nook is bricked. Any ideas what went wrong?
I've read some other threads about similar problems. It seems there is a fix to get it back to stock (1.1.0). I hope the Recovery thread I mentioned above is where the answer lies. But, I'm a bit confused and don't want to make any more mistakes. I only have one 4GB SD card at my disposal right now.
My questions are as follows:
1. Is my NC bricked beyond hope of recovery?
2. If I follow the procedures in this post can I get it to boot from the sd card even though it won't turn on at all?
3. What is the difference between the Rootpack and the Clockwork Recovery Image?
4. This is the confusing part. Should I download the RootPack? Or, should I download a bootable Clockwork SD card (128mb, 1gb, 2gb, 4gb, 8gb)
5. Since I only have a 4GB card, what should I choose?
6. Should I opt for 1.0.1, or 1.1.0 where it was still working.
7. Can I get all of this on one 4GB card?
8. Is there anything else I should be weary of before starting this procedure?
If i have posted this in the wrong place, I am sorry. But, I hope someone can clear things up for me. Thanks.
Click to expand...
Click to collapse
Joe, I would recommend downloading the 1gb rootpack image and a restore to stock file. Make your bootable clockwork recovery image, place the resotre to stock file on the sdcard, turn your nook off, insert the sdcard, power on and flash the file. All this info and more can be found in my thread here:
http://forum.xda-developers.com/showthread.php?t=949699
Thanks for your suggestion Riley, please take a look at my post # 7 above. Seemd my NC
had a low battery. When I charged it, all was ok. It booted up and I was back in 1.1.0.
But, I just now tried autonooter 3.0.0 again. When I pluged thr NC inyo my PC, I got some sort or warning message. I hit cancel and waited a few minutes. The message came up again. It said the device was not recognized. I unplugged, removed the card, and my fully charged NV won't turn on. And, windows explorer can not read the sd card. This is basically what happened yesterday to cause my panic. The sd card had all the files befor I inserted it into the NC. Now, it's unreadable and I can't turn on or boot the NC again.
Is it autonooter 3.0.0, or the card, or the Nook, or me?????
One correction to post # 10. I can read the sd card in windows explorer. But my NC won't turn on.
With sd card out of the Nook, I get a "Welcome to the Found New Hardware Wizzard"
What does this tell anyone about the condition of my Nook?
I am having a problem and don't really know what to do. When I start my NC its stops at the N screen and goes no further. I've tried a lot of the different ways to get it back to stock with no luck. When I try to write CWM to my SD card with win32 it either doesn't have enough room to put the stock file on the zip with it or when I open the SD card it says the card needs to be formatted. The file is a tr.gz or something like that is there a step between that I am missing or just download the CWM and write to SD using win32? I also tried adb with no luck. I am very new to rooting so any super dumbed down instructions would be greatly appreciated.
Sent from my ADR6300 using XDA App
You can put the rom image to a separate SD card. Just swap it after you boot up from cwr. I did it before for flashing froyo to emmc.
Sent from my PC36100 using XDA App
72chevy2k2 said:
I am having a problem and don't really know what to do. When I start my NC its stops at the N screen and goes no further. I've tried a lot of the different ways to get it back to stock with no luck. When I try to write CWM to my SD card with win32 it either doesn't have enough room to put the stock file on the zip with it or when I open the SD card it says the card needs to be formatted. The file is a tr.gz or something like that is there a step between that I am missing or just download the CWM and write to SD using win32? I also tried adb with no luck. I am very new to rooting so any super dumbed down instructions would be greatly appreciated.
Click to expand...
Click to collapse
Have you followed the restore-to-stock procedure outlined in this thread?
http://forum.xda-developers.com/showthread.php?t=914690
Just a noobish advise!
After configure everything and become accustomed to some of the NC behaviors this should not matter, but I remember at my first attempts at rooting the NC, using a Win7 PC was much easier than using Win XP or iOS devices. Might fix your 'not recognized' problems, sd card recognition and formatting problems etc.
It has CWM on it. I can get it to recovery but it will not recognize the SD or not mount it and I go to mount it in the menu and it says something like can not mount SD card so I have been trying to do the CWM SD burn but I keep getting the above errors I am on a vista computer so I will try it on my windows 7 one and see how that goes. And the different SD card one I will try that as well after work thank you for the help.
Sent from my ADR6300 using XDA App
RickOSidhe said:
Have you followed the restore-to-stock procedure outlined in this thread?
http://forum.xda-developers.com/showthread.php?t=914690
Click to expand...
Click to collapse
Yes I did try that one I put the nookie froyo on the SD and put it I'm my turned off NC and plugged it in to my computer and it sat at the N screen forever and after a while I took it off and it was still in the same state could the CWM be the problem?
Sent from my ADR6300 using XDA App
I'm not sure what posts 13 thru 18 have to do with my problem???
Just didn't feel like starting a new thread for the couple of questions I had along the same line as yours.
Sent from my ADR6300 using XDA App
Does anyone know how to test if a bootable sdcard with nookie honeycomb actually works before you test it out on the nook color? thnx
btw i used the process that was on this site http://theunlockr.com/2011/02/07/how-to-load-honeycomb-android-3-0-on-the-nook-color-usd-method/
Not sure why you need to test it before putting it in the nook. If you're worried about doing any harm to the nook it's really not possible. Just put the card in and try to boot. If it doesn't boot take the card out and boot up normally, no harm no foul.
ryspy8492 said:
Not sure why you need to test it before putting it in the nook. If you're worried about doing any harm to the nook it's really not possible. Just put the card in and try to boot. If it doesn't boot take the card out and boot up normally, no harm no foul.
Click to expand...
Click to collapse
I second this. By default, all the Main Roms for Nookie Froyo and Nookie Honeycomb have no features enabled that will touch your Nook Color. The only thing it touches on the NC is the Cache Partition in order to prevent too many writes to the SD and to also speed things up. Anything done there won't screw up your NC in a Million years and Switching back to Stock and doing a few things will wipe any evidence. Or if really paranoid you can Flash back to Factory to ensure all is wiped.
____________________________________________________
Sent from Nookie Froyo using Tapatalk
thnx u guys, But i have another problem. i succesfully installed the honeycomb and got it to work on the nook color. But when I go to my computer with the sd card plugged in, it says that i only have 115 mb of data on the card. I have an 8 gb card. It's not left on the card, it says 115 mb out of 115 mb of data, even after i deleted everything. Anybody know how to restore it back to the 8 gb data amount thnxx
NookColor Format and partition your SD card back to a usable state
Opinion
Since the OP seems to have been answered, I'd like to piggy back a bit
Been doing some reading on the forums and I have started to vision myself getting in to the nook color honeycomb idea.
But a few questions first...
How well has it worked for anyone who has tried, is it a daily driver yet or too many issues? I have a SGS captivate so I am not too worried about having to mess with it before it works and I can use my phone to access email and all that.
But is it quick and snappy or will I feel like i'm using an underpowered device after using my phone.
And battery life, is it good, acceptable, or what?
Sorry if these have been answered somewhere else i tried to find the answers, but it's getting late and I have work yet to do tonight.
I installed it to emmc..over clocked it's still sluggish. Kinda cool but not a keeper to me.my droid x blows it away on performance. I will be back on phiremod beta 2 soon. Honeycomb is fun to tinker but not primetime. Remember it is not from aosp..missing features. It is amazing how good it isconsidering.
Well...its very promising for being in the early stages of development
Sent from my ncusing XDA App
Will i still have honeycomb on my NC if i format it?
Sent from my NC using XDA App
jlt220 said:
Since the OP seems to have been answered, I'd like to piggy back a bit
Been doing some reading on the forums and I have started to vision myself getting in to the nook color honeycomb idea.
But a few questions first...
How well has it worked for anyone who has tried, is it a daily driver yet or too many issues? I have a SGS captivate so I am not too worried about having to mess with it before it works and I can use my phone to access email and all that.
But is it quick and snappy or will I feel like i'm using an underpowered device after using my phone.
And battery life, is it good, acceptable, or what?
Sorry if these have been answered somewhere else i tried to find the answers, but it's getting late and I have work yet to do tonight.
Click to expand...
Click to collapse
i use honeycomb as a daily driver and if you install V2 on the emmc from samuallhaff(not 100% sure of his username off the top of my head) it runs smooth and it is really clean
i get the stock all day battery life(mainly it just sits in my bag when im in class but i have wifi always on so i dont disconnect from my schools wifi) and web browsing is amazing(it doesnt have flash though not a deal breaker though imo)
just dont use live wall papers and set CPU because they drain battery life faster and they diminish performance big time
bratliff said:
I installed it to emmc..over clocked it's still sluggish. Kinda cool but not a keeper to me.my droid x blows it away on performance. I will be back on phiremod beta 2 soon. Honeycomb is fun to tinker but not primetime. Remember it is not from aosp..missing features. It is amazing how good it isconsidering.
Click to expand...
Click to collapse
if you have setCPU or a live wallpaper installed on honeycomb it diminishes performance by 100%
i noticed this performance boost after i uninstalled setCPU and removed my live wallpaper from my honeycomb install and so far it has been great
luigi90210 said:
i use honeycomb as a daily driver and if you install V2 on the emmc from samuallhaff(not 100% sure of his username off the top of my head) it runs smooth and it is really clean
i get the stock all day battery life(mainly it just sits in my bag when im in class but i have wifi always on so i dont disconnect from my schools wifi) and web browsing is amazing(it doesnt have flash though not a deal breaker though imo)
just dont use live wall papers and set CPU because they drain battery life faster and they diminish performance big time
if you have setCPU or a live wallpaper installed on honeycomb it diminishes performance by 100%
i noticed this performance boost after i uninstalled setCPU and removed my live wallpaper from my honeycomb install and so far it has been great
Click to expand...
Click to collapse
I will remove set cpu and report back. I thought it was needed for oc.
tylrdoan said:
Will i still have honeycomb on my NC if i format it?
Sent from my NC using XDA App
Click to expand...
Click to collapse
I just realized that you are running HC from your SD card.
No, if you format that SD card, you lose HC. It actually mentions that in the procedure you linked in your original post.
The reason you only see 115MB on the card when you mount it on your Windows computer is because Windows can only see the first partition, the boot partition, that was written to that SD card as part of the procedure you followed. The rest of the space is taken up by partitions Windows can't see without help.
So if you want to continue to run HC off the SD card you have to dedicate that SD card just for running HC.
SD Card Partitions
while installing the image 3 patitions will be written on your sd-card.
1) root partition
2) honeycomb
3) fat32-partition
to use the full size of the sd-card use a partition manager to extend the fat32-partition.
installed apps can than transferred to the fat32-partition
fugitoid said:
I just realized that you are running HC from your SD card.
No, if you format that SD card, you lose HC. It actually mentions that in the procedure you linked in your original post.
The reason you only see 115MB on the card when you mount it on your Windows computer is because Windows can only see the first partition, the boot partition, that was written to that SD card as part of the procedure you followed. The rest of the space is taken up by partitions Windows can't see without help.
So if you want to continue to run HC off the SD card you have to dedicate that SD card just for running HC.
Click to expand...
Click to collapse
i was wondering if i put honeycomb on my nook color, not on the sdcard, how would i do it. The instructions on that site only says how to make a bootable sd card. And i was using HC on a level 4 sd card and it said that u need a level 6. But i was still able to get it to run. The honeycomb on the sd card level 4 was pretty slow. i was wondering if i got it on my NC, would it be faster. If it would, can someone show me how?
Just follow the instructions here:
http://forum.xda-developers.com/showthread.php?t=947071
bratliff said:
I will remove set cpu and report back. I thought it was needed for oc.
Click to expand...
Click to collapse
Nope lots of lag still. Its ok not complaining. Lots of fc in dolphin too. Back to phiremod 2.2 for awhile.
You have to remember that the Honeycomb that was Ported is the Preview Release, think Demo version. It wasn't ported from (pretty much)scratch like Froyo was. It is more of a Rom hack. For a better performing version we have to wait for Honeycomb's Official Full release. In perspective, it's amazing how much deeper-blue got done with just the Preview image.
____________________________________________________
Sent from Nookie Froyo using Tapatalk
GonzoTheNose said:
while installing the image 3 patitions will be written on your sd-card.
1) root partition
2) honeycomb
3) fat32-partition
to use the full size of the sd-card use a partition manager to extend the fat32-partition.
installed apps can than transferred to the fat32-partition
Click to expand...
Click to collapse
Not picking on you but it's actually 4 partitions.
1=Boot (Basically redirects to the Android on the SD)
2=System (Holds the main OS files of Honeycomb)
3=Data (Where all you're settings and other data are)
4=SDcard (This partition is used as a stand in for a Physical External SDcard)
Also the easiest/simplest way to access the 2, 3, and 4 partitions is to use linux. Burn a LiveCD if you don't want to Install, although Ubuntu can be Installed without Partitioning or other such normal 2nd OS needs. Just get the Windows installer from http://ubuntu.com
____________________________________________________
Sent from Nookie Froyo using Tapatalk
SD Card and Honeycomb 3.0 v4 image
I've been looking for an answer throughout the forums on this question but can't seem to find anything. The problem: I used the Honeycomb v4 image with WinImage. The SD card was originally 8 GB. The image file is 4 GB with approximately 600 MB or so of free space. Missing: 4 GB that was on the card.
1. Can I use a utility under Windows to get the free space allocated on the SD card that remains? If so, how?
2. Is there an option with WinImage to allocate the additional space on the SD card as free space and include it as part of the image that is being written to the SD card?
3. If I need to restore my SD card back to 8 GB, can that be done in Windows Explorer (not sure that Windows will pick up the full 8 GB as I haven't tried that yet).
Thanks.
Ohh, you have that problem. Don't know where you've been looking but that has been asked and answered many times. The problem is that when you install Froyo or Honey to the SD it makes 4 partitions like I listed above, but Windows can only see the First Partition and only Formats the First partition. The easiest way to fix is to put it in UnRooted Stock and Format it from Settings. If you don't have that you can Burn a Linux or GParted Live CD and Format it from their.
____________________________________________________
Sent from Nookie Froyo using Tapatalk
Alright, so I'm 100% brand new to the Nook. Infact, I don't even have it yet, but I'm buying it tomorrow (3/3)
If I'm going to use honeycomb on it, do I just simply pop in the SD card and it's ready to go?
Do I need to root it before hand or is it already rooted?
How do I get GApps and Market running?
I honestly looked around a bit but I'm terribly confused. Any pointers would be greatly appreciated.
EDIT: Also, I can't even seem to get the IMG burned onto my microSD. Win32 Disk Imager keeps spitting back that the SD card doesn't have enough space, but it's an 8GB card with nothing on it, so it has plenty.
1) No, you don't have to root first - just pop in the uSD card and you are good to go.
2) To install Market and GApps you will have to install ADB on your primary machine first (which can be a PITA). There is all sorts of help around to do that. I downloaded a script (search for HoneyGapps.v2 here) that did the install for me in one step.
3) From what I understand the image is too large for Win32 Disk Imager. I used WinImage and it worked fine.
BTW - I am loving HC - I've adopted it completely. My major problem is that many apps are not showing up in the Market, even though they were installed and ran fine on my rooted 2.1 system. I think it is because the Market does not recognize the device name under HC 0.4.
How do I use WinImage to do that?
Sorry, but that program just confuses me, lol
First you use winImage and click disk then restore image. Make sure you have all files selted when looking for the file to restore. Are you going to install it to internal or on a USB card ?
Trying from SD card first unless it's too slow. If I want to install on internal, how do I backup my original Nook data?
Also, I figured out WinImage, I'm burning it now. I used another program, but that didn't do anything when I powered on the Nook. I shouldn't have to do -anything- before booting from the SD, right? The Nook is brand new, I popped in the SD card and it didn't work. We'll see what happens after WinImage burns it though
The SD version is kinda slow and if you look there is a Honeycomb EEMC V4 install that has the google apps and other goodies Installed. It has all you need already put in it. In the post you will find all the links and info needed to install. You just mount your nook like normal to your computer and copie the files from internal memory.
here is the Link use the version 2 dated 2-21
http://forum.xda-developers.com/showthread.php?t=947071
shadowswittness said:
The SD version is kinda slow and if you look there is a Honeycomb EEMC V4 install that has the google apps and other goodies Installed. It has all you need already put in it. In the post you will find all the links and info needed to install. You just mount your nook like normal to your computer and copie the files from internal memory.
here is the Link use the version 2 dated 2-21
http://forum.xda-developers.com/showthread.php?t=947071
Click to expand...
Click to collapse
Haha, I had just started reading that a second ago actually. It lists a lot of problems. Are those problems present in the SD card version as well? Also, is Froyo more stable?
I have been running version 2 for a lil while and it runs smooth. I haven't had any real issues from it. I put it on my wife's nook also. It runs smooth and every app I have installed runs with no issues.
OK, I'm gonna try the script for GApps in a second. Where can I find the drivers for the Nook? I already have ADB installed, I've rooted 3 phones before this, so I got ADB usage down...
EDIT: Also, where can I find info on partitioning the SD card so I can still use it?
Honeycomb is built for tablets and sems more fluid. All are really development builds. We will all be waiting on the devs and google for the actual honeycomb
Which are you going to do the Sd or Internal ? If you load the version 2 internal it already has the Google apps included.
I haven't found a way to backup my original Nook data before installing it on internal. SD card works just fine, as long as I can find a way to partition it so I can still use it as an SD card. Either way, I still need the ADB drivers and the one thread I found so far has a broken link. Boo!
If you install it to internal you can then reformat the sd card and use it as normal.
OK, but then how do I back up the current internal memory and I still need a link to the ADB drivers in case I want to run off SD.
Use my USB mass storage utility (see dev). Make .tar files of internal data and system content.
To restore extract content back onto data and system.
Of course, if you get adb working, make dd images of partitions.. more conventionnal backup than above..
Sent from my HTC Desire using XDA App
Alternatively, can't I just have someone send me their files?
Bump? Anyone?
EDIT: Also, how do I get ADB working if I do the internal HC?
gmap516 said:
Bump? Anyone?
EDIT: Also, how do I get ADB working if I do the internal HC?
Click to expand...
Click to collapse
All your questions in this thread can be answered by doing a little work searching around... you shouldn't expect a personal tutor...
If you put a little of your own effort, you will learn much more than following someone's instructions.
Thanks man, that was helpful. I definitely didn't use the search tool before.
gmap516 said:
Thanks man, that was helpful. I definitely didn't use the search tool before.
Click to expand...
Click to collapse
See? You're learning already then.
I just got my Nook Color and am looking into how to go about rooting it for CM7. I checked out CM's Wiki page on it here and it mentioned using uNooter. I haven't read about this tool anywhere else and Google searches for it turn up practically nothing. Is this not the right tool to use? The forums mostly seem to mention ManualNooter, Auto-Nooter, etc. Also is it possible to flash CM7 on the internal memory and avoid using an SD card altogether?
Never heard of unooter and I've been reading theses forums since December. Auto mooter was to root the older firmware 1.0 ,1.01,and 1.1. Manualnooter is for the newer froyo firmware.
Rooting stock is not required to install CM7.
You simply need to create a Clockworkmod recovery microSD card and you can then flash CM7 (which is pre-rooted) from Clockworkmod.
martian21 said:
Rooting stock is not required to install CM7.
You simply need to create a Clockworkmod recovery microSD card and you can then flash CM7 (which is pre-rooted) from Clockworkmod.
Click to expand...
Click to collapse
Thanks. I figured this would be relatively easy compared to rooting and putting CM7 on my EVO but reading on here there seemed to be a few different approaches. Will that method allow me to flash CM7 to the eMMC, and after that point will I no longer need the SD card to boot? I ask because I don't have a card on hand and am considering backing up the contents from my phone's card and using that.
xdp said:
Thanks. I figured this would be relatively easy compared to rooting and putting CM7 on my EVO but reading on here there seemed to be a few different approaches. Will that method allow me to flash CM7 to the eMMC, and after that point will I no longer need the SD card to boot? I ask because I don't have a card on hand and am considering backing up the contents from my phone's card and using that.
Click to expand...
Click to collapse
Correct.
You only need the SD to install a bootable CWM then you can flash CM7 from that. After words when CM7 is installed to eMMC you are able to use Rom Manager to install CWM to eMMC as well, so everything will be set up on the device's internal memory. SD is needed only for the initial boot of CWM to install CM7.
Nburnes said:
Correct.
You only need the SD to install a bootable CWM then you can flash CM7 from that. After words when CM7 is installed to eMMC you are able to use Rom Manager to install CWM to eMMC as well, so everything will be set up on the device's internal memory. SD is needed only for the initial boot of CWM to install CM7.
Click to expand...
Click to collapse
Thanks. From reading around it seems you can't use a phone or the Nook to mount the card and write the image, so I'll have to buy a reader and might as well get a card for the Nook at the same time. Since I'll be flashing CM7 to eMMC does it really matter if I get a class 4 or above card like many suggest? I'm not sure what's in my EVO but that is my benchmark. Class 2 seems to be what comes up in searches the most.
The general consensus it's to stick with Sandisk SD cards for the Nook. There are others that work as well but Sandisk it's pretty much a guarantee of zero issues. You can usually score an 8 GB class 4 Sandisk at Wal-mart for a Jackson.
Sent from my NookColor using XDA App
martian21 said:
The general consensus it's to stick with Sandisk SD cards for the Nook. There are others that work as well but Sandisk it's pretty much a guarantee of zero issues. You can usually score an 8 GB class 4 Sandisk at Wal-mart for a Jackson.
Sent from my NookColor using XDA App
Click to expand...
Click to collapse
Transcend 8 GBs have worked beautifully on all 3 NC's in my house.
xdp said:
I just got my Nook Color and am looking into how to go about rooting it for CM7. I checked out CM's Wiki page on it here and it mentioned using uNooter. I haven't read about this tool anywhere else and Google searches for it turn up practically nothing. Is this not the right tool to use? The forums mostly seem to mention ManualNooter, Auto-Nooter, etc. Also is it possible to flash CM7 on the internal memory and avoid using an SD card altogether?
Click to expand...
Click to collapse
I was the one that put together uNooter after being contacted by the individual that maintains the CyanogenMod wiki. They wanted a universal Nooter that would only root the device, install Superuser, ADB, RomManger, and work on all versions of the NC software. They asked that it be called uNooter. It is not released anywhere else, so that is why you did not see any mention of it on a Google search.
martian21 said:
The general consensus it's to stick with Sandisk SD cards for the Nook. There are others that work as well but Sandisk it's pretty much a guarantee of zero issues. You can usually score an 8 GB class 4 Sandisk at Wal-mart for a Jackson.
Click to expand...
Click to collapse
That information is really only relevant to running a ROM from the SD card. If you're only using the card for storage, or to get CM7 on eMMC, manufacturer and card class don't matter.
xdp said:
Thanks. From reading around it seems you can't use a phone or the Nook to mount the card and write the image, so I'll have to buy a reader and might as well get a card for the Nook at the same time. Since I'll be flashing CM7 to eMMC does it really matter if I get a class 4 or above card like many suggest? I'm not sure what's in my EVO but that is my benchmark. Class 2 seems to be what comes up in searches the most.
Click to expand...
Click to collapse
I wrote my image over USB to a card in the NC without a card reader. I've seen wiki guides saying there's a greater chance of the write getting interrupted, rendering the card unusable at least in the short term, but it worked for me. It was only when I wanted to revert the card to storage that I ended up needing a card reader. The links in my sig have a little more info about using the NC as your card reader, but you're probably better off just grabbing one.
Also, while CM7 does not require an SD card, many apps do. Your experience will be somewhat limited without one.
GMPOWER said:
I was the one that put together uNooter after being contacted by the individual that maintains the CyanogenMod wiki. They wanted a universal Nooter that would only root the device, install Superuser, ADB, RomManger, and work on all versions of the NC software. They asked that it be called uNooter. It is not released anywhere else, so that is why you did not see any mention of it on a Google search.
Click to expand...
Click to collapse
Great to hear directly from the source, thanks! I'm surprised more people don't point to your tool on the forums given that it's right on the CM Wiki. At this point I'm a little confused about the various approaches to do this. Does your tool install ROM Manager directly into the stock Nook interface, and then I flash from there, versus booting CWM off the SD as people mentioned earlier in the thread? Sorry if that's completely off-base.
Taosaur said:
That information is really only relevant to running a ROM from the SD card. If you're only using the card for storage, or to get CM7 on eMMC, manufacturer and card class don't matter.
I wrote my image over USB to a card in the NC without a card reader. I've seen wiki guides saying there's a greater chance of the write getting interrupted, rendering the card unusable at least in the short term, but it worked for me. It was only when I wanted to revert the card to storage that I ended up needing a card reader. The links in my sig have a little more info about using the NC as your card reader, but you're probably better off just grabbing one.
Also, while CM7 does not require an SD card, many apps do. Your experience will be somewhat limited without one.
Click to expand...
Click to collapse
Yeah, I thought about this as well and figured I'd want a full-time card for the device so I ordered a card with SD adapter. I figured the specs didn't matter at all for a data card but picked up a class 4 Sandisk anyway.
xdp said:
Great to hear directly from the source, thanks! I'm surprised more people don't point to your tool on the forums given that it's right on the CM Wiki. At this point I'm a little confused about the various approaches to do this. Does your tool install ROM Manager directly into the stock Nook interface, and then I flash from there, versus booting CWM off the SD as people mentioned earlier in the thread? Sorry if that's completely off-base.
Click to expand...
Click to collapse
I received notice this past Monday that the cleaned up version of the CyanogenMod wiki was online, so not a whole lot of exposure for people to talk about it. I believe the old wiki had listed the different Auto-Nooter and Manual-Nooter that went with each software version, thus taking up a lot of space and confusion. AN and MN are more tailored to people that want to stick with the stock software, but enable full Android Market access. People that want to go from stock to CyanogenMod don’t need all the extra software that is bundled with AN and MN just to be able to flash CyanogenMod. By eliminating all the version specific software I was able to create a version that would work on all current, and hopefully future, software versions.
Yes, my versions will install Rom Manager directly into the interface. You would then allow Rom Manger to install CWM Recovery, and then you can download and install CyanogenMod from the device. You could also take a full backup of your current stock rom. Using uNooter or bootable CWM will both get you to where you want to go, it is really up to you on how you want to get there.
Instructions for installing CM7 to the eMMC using CWM on a SD card (which can later be reformatted for storage) is in this thread: http://forum.xda-developers.com/showthread.php?t=1030227.
GMPOWER and bigbob23: Thanks for the info, that was exactly what I needed to clear everything up. I suppose backing up the stock ROM would be useful in case I ever needed to restore it for warranty purposes or anything. I'm not sure which approach I'll go with, my SD card came today so I'll be reading over both techniques and giving one a shot!
Thanks again.
I went through the process with uNooter as outlined on the CM Wiki and it went perfectly. The only thing was I had to use SD Formatter and the earliest 0.1 version of Win32 Disk Imager to get the image to write to the SD card. Not sure if that problem is specific to Win7 64-bit but maybe I can mention it on the wiki.
xdp said:
I went through the process with uNooter as outlined on the CM Wiki and it went perfectly. The only thing was I had to use SD Formatter and the earliest 0.1 version of Win32 Disk Imager to get the image to write to the SD card. Not sure if that problem is specific to Win7 64-bit but maybe I can mention it on the wiki.
Click to expand...
Click to collapse
I am glad that you got everything to work right. I think the problems that you might have experienced are more associated with win7 x64. My replacement laptop with win7 x64 will not be here for another two weeks for me to test it on, but in the past I have had to use Unlocker almost every time to unlock the usb drive before I could proceed with flashing using Win32 disk imager. On my current windows 7 x86 setup, I have yet had to use Unlocker to be able to flash an image with the win32 program. HERE is a post with people having problems in the past with win32 disk imager on win7 x64, they took the same path that you did with Panasonic SD Card Formatter to fix it.
uNooter
I guess this worked for the latest firmware of 1.2.0? (I am about to root one soon!) thanks in advance!)
AF9210 said:
I guess this worked for the latest firmware of 1.2.0? (I am about to root one soon!) thanks in advance!)
Click to expand...
Click to collapse
I just got my nook last week so I'm assuming I had the latest factory firmware when rooting, but I didn't check.
xdp said:
I just got my nook last week so I'm assuming I had the latest factory firmware when rooting, but I didn't check.
Click to expand...
Click to collapse
If you see "Read Forever" when booting (stock) then "Yes" you have the latest firmware.
ADB after uNooter?
Above, GMPOWER mentioned ADB as one of the items uNooter installed. I've rooted with uNooter in part because *nothing* *else* I could find would actually boot on my NC and in part because I liked the idea of a relatively minimal root. I figured I could then push any apk's I wanted to add with adb.
Unfortunately, that doesn't seem to be working. I used "NookColor Tools -> All Settings -> Development" to enable USB debugging, but 'adb devices' shows nothing. If I plug in my G2 with CM7, adb finds it just fine, so I'm pretty sure I've got the computer side of things working. Any hints about getting the NC to play nice?
Hi all,
After reading all the great stuff about the NC recently, CM7, Phiremod and the honeycomb releases Ive convinced a mate of mine in California who's visting the UK to bring me one over to tinker with..
Now.. After doing some research Im overwhelmed with info and thought Id ask for "up to date" pointers..
1. Is there a straightforward guide to rooting and installing the NC, as I live in the UK Im not fussed about the original NC rom. I've seen Cyanogenmods wiki entry http://wiki.cyanogenmod.com/wiki/Barnes_&_Noble_Nook_Color:_Full_Update_Guide is this the best approach?
2. Which rom is best? Plain CM7, Phiremod or Honeycomb as posted by deeper blue?
3. Any other pointers?
Sorry for such basic questions, im just overloaded and not 100% sure which is the best process to take.
thanks all in advance
Angelo
Take a look in the stickies, there are comprehensive guides to root....just make sure you're using the correct version. If your mate is buying a brand new one for you, you'll most likely need the version for rooting with partitions. I have used all 3 of the roms you mentioned and my personal preference is CM. Phiremod is just a heavily themed version of CM and the honeycomb build is ok, but it lacks some features and is still a bit buggy because the source code has not been released for honeycomb
Sent from my DROIDX using XDA Premium App
If you decide on CM7 (which I personally recommend), I would look for "How to Install CynaogenMod 7 on the Nook Color" (can't post links) on YouTube. I personally found it very useful. If something seems off, make sure you look at the description and read some user comments. With the way this guy explains it it's practically idiot proof and it's unlikely you'll mess anything up.
thanks
Thanks Guys,
I've been doing more reading and yeah looks straightforward..
Considering Im not interested in the core B&N OS, I was thinking of installing CM7 to the internal memory and then perhaps installing Honeycomb (deeperblue version) on a memory stick to "play with".
From what I can tell the HC port is nice as a toy but not robust enough considering HC hasnt been released to AOSP.
Makes sense?
If you are looking to 'play with' honeycomb on a MicroSD install, check out http://forum.xda-developers.com/showthread.php?t=1045018
You get Honeycomb and Phiremod in a dual-boot image tailored for a MicroSD install.
Read through the thread and see if it's to your taste.
For the most usable ROM, go with CM7. Just follow this guide in this post. Very simple.
http://forum.xda-developers.com/showthread.php?t=1030227
The only issue is if you have a "blue dot" with the newer partition. Just read the RED text at the beginning of that post.
After you get this running, you can read up a little more and create a SD card w/ Honeycomb or Phiremod to play around with. But CM7 is the most stable out there (well, I guess Phiremod is good to, because it is a customized CM7).
Good Luck.
Use CM7, it's the best for now.
HC is beauty but still a lot of work to be done.
jasoraso said:
For the most usable ROM, go with CM7. Just follow this guide in this post. Very simple.
http://forum.xda-developers.com/showthread.php?t=1030227
The only issue is if you have a "blue dot" with the newer partition. Just read the RED text at the beginning of that post.
After you get this running, you can read up a little more and create a SD card w/ Honeycomb or Phiremod to play around with. But CM7 is the most stable out there (well, I guess Phiremod is good to, because it is a customized CM7).
Good Luck.
Click to expand...
Click to collapse
+1 for this guide!
"The only issue is if you have a "blue dot" with the newer partition. Just read the RED text at the beginning of that post."
For some reason I thought that statement was obsoleted, am I wrong?
It was valid if you have v1.2 NC and flashing with CwM Recovery prior to v3.2.xx.
But since the instructions do indicate using v3.2.0.1 CwM, then why care about blue-dot or not since it has been taken care off unless v3.2.x.x not properly does the job.
Maybe because you have a choice in partition schemes?
You really will want to repartition the new nook. 1 gb is a very small partition for your programs. 5gb works much better and the change is fairly painless.
Sent from my NexusOne using Tapatalk
IFLATLINEI said:
Maybe because you have a choice in partition schemes?
Click to expand...
Click to collapse
That's a reasonable reason but again, it shouldn't be highlighted in RED, ORANGE at best
In fact, since it's a choice of good, it should be in GREEN.
thanks guys
Thanks guys, Im in awe with all the feedback and comments this thread is getting..
yes, Ive received the NC today and its charging Also doing loads and loads of reading
My nook does have a bluedot so my partitions are 5gb Data/1Gb Media.
I'll probably leave it like so, considering CWM supports this now its ok, and put most of my media on an external 16gb microsd card..
If Im right I can still install apps into the 5gb partition right?
Also , if I understand it correctly I can actually install CM7 onto a microSD and simply boot from this right ,without rooting/installing CWM... ?
Angelo
asantaga said:
If Im right I can still install apps into the 5gb partition right?
Also , if I understand it correctly I can actually install CM7 onto a microSD and simply boot from this right ,without rooting/installing CWM... ?
Angelo
Click to expand...
Click to collapse
You can still install apps into the /data partition but pls note: if your NC isn't rooted, you can only install apps that offered by B&N. You do not have full access of Android Market.
About CM7, yes, you can run CM7 off uSD and not touching the eMMC (aka internal memory) at all. Be considered getting a Sandisk (class 2 or class 4)
B-i-g thanks
All,
BIG Thanks to everyone,
I've successfully (actually flawlessly), repartitioned my nook to the old standard and installed CM7 into the internal memory..
All flawlessly. Also ordered a sandisk 16gb memory card from amazon.co.uk, so that will hold most of the media..
I was considering making the main partition >1Gb (1.9Gb) but decided to leave it as it is for now.. It was so easy yo tweak I thought Id try it vanilla and then grow if I need to..
Awesome-ness
ok wheres my 5gb?
ok got one question now..
/media is supposed to have 5gb available..
CM7 doesnt appear to allow me to use it as a SD card.. but ive found it mounted as /mnt/emmc
How does one use it ??? I tried downloading pdfs and I was told that an SD card was required for this... :-( when i get home I was going to try mounting it via usb to a computer but is that the only way?
There are 2 things you need to know
1. If you're running CM7, you MUST have a uSD. "MUST" does seem to be a strong word but for some reason, that I still try to figure out, an external uSD is required. W/o it, you can still using it but there's some apps won't run if no uSD plugged. It means the NC works 99.9% w/o uSD. I guess I should take the "MUST" back, ehhh
2. If you're running the recently nightly-build CM7, the USB storage utitlity should already be implemented within the ROM. All you need to do is
1. Connect NC and PC via USB cable
2. by this time, the usb indicator should be appeared on the NC, tab on it
3. Tab on Connect USB to transfer .......
4. Turn USB Mass Storage on
5. by this time, PC should recognize the /media on the NOOK
6. do what you want to do
votinh said:
There are 2 things you need to know
1. If you're running CM7, you MUST have a uSD. "MUST" does seem to be a strong word but for some reason, that I still try to figure out, an external uSD is required. W/o it, you can still using it but there's some apps won't run if no uSD plugged. It means the NC works 99.9% w/o uSD. I guess I should take the "MUST" back, ehhh
2. If you're running the recently nightly-build CM7, the USB storage utitlity should already be implemented within the ROM. All you need to do is
1. Connect NC and PC via USB cable
2. by this time, the usb indicator should be appeared on the NC, tab on it
3. Tab on Connect USB to transfer .......
4. Turn USB Mass Storage on
5. by this time, PC should recognize the /media on the NOOK
6. do what you want to do
Click to expand...
Click to collapse
Wicked, yeah didnt see the little icon down below
thanks
Hey Angelo, I just wanted to share my experience.
I love gadgets, and tinkering with gadgets. I am an IT manager/minor programmer/webmaster, etc. etc... so no surprise that I feel right at home here BUT, I also love to read and I think that the Nook app for Android is bunk (e.g. "poor") compared to the stock NC experience.
I decided pretty early on that I wanted to keep the NC stock (partially due to warranty) and have a dual boot option for CM7. I had initially installed CM7 on my NC, replacing the stock rom all together. I ended up putting the stock ROM back on.
Here is a post from another thread where I outline that experience...and the guides that I use.
I talk about partitions in that post, since you have a new NC, don't even bother yourself with that...just note the guides there that will get you where you want to go, either way....
asantaga said:
ok got one question now..
/media is supposed to have 5gb available..
CM7 doesnt appear to allow me to use it as a SD card.. but ive found it mounted as /mnt/emmc
How does one use it ??? I tried downloading pdfs and I was told that an SD card was required for this... :-( when i get home I was going to try mounting it via usb to a computer but is that the only way?
Click to expand...
Click to collapse
Many (older) apps in on Android are designed to ONLY look for storage called "sdcard". So your 5gb of internal (emmc) called "Media" will not be able to be utilized by those Apps.
Apps that are better programmed and designed can access the memory called "Media".