So i havent been able to install any miui roms in the past couple of days idk y i use to be able to install them but after i installed cyanogen's 7.0 i cant install any of them i really miss miui i just wanted to test out 7.0 but know i cant everytime i flash a miui rom i always get stuck on the boot and it just keeps rebooting so if any one can help me i will appreciated it thx
Just going off the top of my head, I had the same problem but I think I was able to install MIUI ROMS by downgrading to Froyo before trying to install any MIUI ROMs.
I'm no expert but I assumed it was a Gingerbread-vs-Froyo thing and that MIUI being based on Froyo (until the recent releases) somehow required you to be on Froyo before installing them. Cyanogen 7 is Gingerbread so that's where my thinking came from.
Anyhow, it's worth a shot to try downgrading first.
hulksmash said:
Just going off the top of my head, I had the same problem but I think I was able to install MIUI ROMS by downgrading to Froyo before trying to install any MIUI ROMs.
I'm no expert but I assumed it was a Gingerbread-vs-Froyo thing and that MIUI being based on Froyo (until the recent releases) somehow required you to be on Froyo before installing them. Cyanogen 7 is Gingerbread so that's where my thinking came from.
Anyhow, it's worth a shot to try downgrading first.
Click to expand...
Click to collapse
I can flash a MIUI ROM of any type, but only Froyo versions of it actually work without fatal flaws. My problem is that the calibration settings force closes upon bootup and then NOTHING will install. I'm stuck with the basics, which is unacceptable.
On each download/install it goes into a soft reboot at install of the app.
Related
I have tried a couple of custom roms and they have all worked fine at first but then after a while most of them would do something like force close whenever i try to open anything. This is getting really frustrating. I have a build 1009 and im looking at phoenix 3.0 and perception 10.0 both look really nice. Could someone tell me what im doing wrong and how to fix it. Every time i try to enable third party apps recently or something else ( I can't remember specificly what it was but it was rooting it or something) it will do the blah blah something apcore stoped working force close so right now im just going to use my phone on stock firmware and use it like normal and see what happens but could someone help me. I have used gingerclone, Assonance (force close problem), Darky 8.0 with the captivate workaround (force close problem), and maybe a few others but those are the only ones i can remember.
Custom roms are rooted with side loading enabled. So if you are trying to do this after you have the rom loaded, that could be a problem. I also would like to know what you are restoring on these roms. Should only be user apps.
To pin point your problem please provide more detail
I have put apps from custom roms onto the stock rom and other roms. Could that be the problem? And also this is what im going back to.
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
Im only doing the first part im not going to jh7. would that have something to do with it. Any help is greatly appriciated.
yamato2 said:
I have put apps from custom roms onto the stock rom and other roms. Could that be the problem? And also this is what im going back to.
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
Im only doing the first part im not going to jh7. would that have something to do with it. Any help is greatly appriciated.
Click to expand...
Click to collapse
What apps?
I do not think only going back to jh7 would cause your issue. Tell me more about what you are trying to do to enable side loading, and why you are doing it on as custom rom
I had the ones i downloaded and i sideloaded one wireless tether app a long time ago then i backed it all up with titanium backup and i would install a custom rom and it would have roms preinstalled on it. I would want to put on a different custom rom so i backed up again and the flashed back to stock the to the new rom. and i would restore all the apps including the one from previous roms. If you are asking for the specifics it would take a while and about the side loading i followed the guide http://forum.xda-developers.com/showthread.php?t=738376 and did the method 3 it seemed to work fine until i rebooted and then it did the force close thing. And i didn't go to jh7 i went to jh6 or jh2 or something like that but im going to try going to jh7 and see if that helps.
dont restore ALL apps in Titanium Backup. safest option is "restore missing apps+data"
all the custom 2.2 roms have tethering/wifi hotspot built into them...no need for another app for it.
for custom roms, you DO NOT need to root or sideload...they are enabled by default on all custom roms.
Thank both of you for your help. I will probably for now only install roms specificly for captivate and with specific instructions.
I bought used milestone 2 days ago and it is slow. I know its rooted because there is superuser icon.
But because of my noobity i dont know what he installed then. Strange thing is that it says Android version 2.2.1 which should be Froyo, but launcher looks like Eclair.
Screenshot pics are below, can you conclude what has he done? And what would you suggest?
About phone in settings: ttp://imageshack.us/photo/my-images/222/20120927013327.jpg/
Home screen like Eclair: ttp://imageshack.us/photo/my-images/713/20120927013831.jpg/
Im not allowed to post links so i removed letter h from my screenshot links. I hope that doesnt break the rules. I apologize if it does.
If i were you, i would definitely do a Factory Reset. Not because of the launcher (probably it's just a custom one), but the slowness.
Besides that, i would install kabaldan's CM7 or CM10.
I did factory reset and everythings the same, so i decided to install something else.
It is already rooted but i dont really know what im doing so i would like to go by some of those tutorials for rooting and installing rom. Can i do the same process as if it wasnt already rooted?
I mean, is it a bit more simple if its already rooted?
Would i mess something up if i did everything from the beggining as in tutorial?
THIS is the best tutorial you can get.
It's for CM7 which you can download from HERE.
But if you decide to give CM10 a try, you will find a link to the latest nighly in my signature, and a guide to make it bootable here.
kralju753 said:
[...]
Strange thing is that it says Android version 2.2.1 which should be Froyo, but launcher looks like Eclair.
[...]
Click to expand...
Click to collapse
It took Motorola forever to bring the 2.2 Update - but still they didn't manage to integrate the Froyo launcher.
Might as well be the official 2.2.1.
Anyhow - the stock roms are pretty bad - use CM (7 or 10, I prefer 7) or something CM-based (like MIUI).
The installation process is the same for every ROM.
Flash vulnerable recovery partition, install Open Recovery, wipe, apply update.zip.
For details refer to the tutorials Erovia posted.
Hello guys,
I have a samsung gt-i9000 with cyanogen 10.1.3 and a few days ago I had experienced some problems, the home button stopped working. I tried quite a few things, based on the info I found on this site and others (like factory reset), but no joy.
SO I thought to myself, better reflash the ROM, but to be honest, if I do that, I might as well install the latest one (10.2.1), and so I decided to do that, but before I start I have a few questions:
I had a look around but I couldn't really find a definite answer to the following questions, so I thought I might post here.
1)Has anybody encountered any issue on the gt-i9000 with the latest ROM?
2)Can I backup all my apps, upgrade the ROM and then reinstall everything from the backup, rather than downloadeing all the apps again? I have never done that before, so I am not sure if it is possible
3)I had a look at the cyanogen mode site and found the relevant info http://wiki.cyanogenmod.org/w/Install_CM_for_galaxysmtd, but I was wondering something: occasionally on my phone a message appears
and asks me whether I want to update the ROM to the latest available one. I have always dismissed that, but I am thinking, can I do the upgrade from there without going through the trouble of reflashing
it (following the instructions above), or is it essentially the same thing?
4)In the instructions it says "The install guide assumes the Galaxy S is running Android 2.3.". Now, last time I have upgraded - from cyanogen 7 to 10.1 - I attempted to install directly 10 over 7 and things
went horrible wrong. I then reflashed the ROM to 2.3 and then installed cyanogen 10.1 and it was OK. DO I have to do the same thing again and install 2.3. first and then 10.2? If so where do I get 2.3 from?
Thanks
Sorry, can somebody move this under questions, just realized that this isn't the right place.
duratto said:
Hello guys,
I have a samsung gt-i9000 with cyanogen 10.1.3 and a few days ago I had experienced some problems, the home button stopped working. I tried quite a few things, based on the info I found on this site and others (like factory reset), but no joy.
SO I thought to myself, better reflash the ROM, but to be honest, if I do that, I might as well install the latest one (10.2.1), and so I decided to do that, but before I start I have a few questions:
I had a look around but I couldn't really find a definite answer to the following questions, so I thought I might post here.
1)Has anybody encountered any issue on the gt-i9000 with the latest ROM?
2)Can I backup all my apps, upgrade the ROM and then reinstall everything from the backup, rather than downloadeing all the apps again? I have never done that before, so I am not sure if it is possible
3)I had a look at the cyanogen mode site and found the relevant info http://wiki.cyanogenmod.org/w/Install_CM_for_galaxysmtd, but I was wondering something: occasionally on my phone a message appears
and asks me whether I want to update the ROM to the latest available one. I have always dismissed that, but I am thinking, can I do the upgrade from there without going through the trouble of reflashing
it (following the instructions above), or is it essentially the same thing?
4)In the instructions it says "The install guide assumes the Galaxy S is running Android 2.3.". Now, last time I have upgraded - from cyanogen 7 to 10.1 - I attempted to install directly 10 over 7 and things
went horrible wrong. I then reflashed the ROM to 2.3 and then installed cyanogen 10.1 and it was OK. DO I have to do the same thing again and install 2.3. first and then 10.2? If so where do I get 2.3 from?
Thanks
Click to expand...
Click to collapse
duratto said:
Hello guys,
I have a samsung gt-i9000 with cyanogen 10.1.3 and a few days ago I had experienced some problems, the home button stopped working. I tried quite a few things, based on the info I found on this site and others (like factory reset), but no joy.
SO I thought to myself, better reflash the ROM, but to be honest, if I do that, I might as well install the latest one (10.2.1), and so I decided to do that, but before I start I have a few questions:
I had a look around but I couldn't really find a definite answer to the following questions, so I thought I might post here.
1)Has anybody encountered any issue on the gt-i9000 with the latest ROM?
2)Can I backup all my apps, upgrade the ROM and then reinstall everything from the backup, rather than downloadeing all the apps again? I have never done that before, so I am not sure if it is possible
3)I had a look at the cyanogen mode site and found the relevant info http://wiki.cyanogenmod.org/w/Install_CM_for_galaxysmtd, but I was wondering something: occasionally on my phone a message appears
and asks me whether I want to update the ROM to the latest available one. I have always dismissed that, but I am thinking, can I do the upgrade from there without going through the trouble of reflashing
it (following the instructions above), or is it essentially the same thing?
4)In the instructions it says "The install guide assumes the Galaxy S is running Android 2.3.". Now, last time I have upgraded - from cyanogen 7 to 10.1 - I attempted to install directly 10 over 7 and things
went horrible wrong. I then reflashed the ROM to 2.3 and then installed cyanogen 10.1 and it was OK. DO I have to do the same thing again and install 2.3. first and then 10.2? If so where do I get 2.3 from?
Thanks
Click to expand...
Click to collapse
1) Didn't use CM, been on OmniROM
2) You can use Titanium Backup
3)Yeah, you could do that, update it via CMUpdater
4)Just before you install a ROM with a higher android Version, always wipe /system partition.
cool thanks!
I have just recently restarted using this phone due to my uscellular S4 getting turned off. I am now back on my LG-P990 currently rooted and running CM10.1. BUT most importantly to me is the fact that I have all my wonderful apps on my s4, I want to be able to use them by using the LG phone as a tether and calls not much else BUT CM10.1 tethering does not work, so i find myself flashing rom after rom, avatar rom, older CM mods, none would turn on tethering, so i flashed a modded version of MIUI for this phone and it worked except for ONE thing no signal, tethering turned on just fine so i decided to look around for other roms and found Slimrom TRYED to flash it didnt work, try to flash actual MIUI roms off there site, didnt work, met with an error in CWM Recovery after some searching I found its because Im running the OLD Bootloader -_- THIS is the issue im having IF MIUI does NOT work is it possible to downgrade the bootloader again so i can restore my CM10.1 backup? I have been working at this for a week, if there is something here about this can someone please just point me at it? I would appreciate any help.
On a side note i DID soft brick the phone the other day and found a program called nvflash witch flashed an install of CM mod. Dont know if that will help any.
Jeffril said:
I have just recently restarted using this phone due to my uscellular S4 getting turned off. I am now back on my LG-P990 currently rooted and running CM10.1. BUT most importantly to me is the fact that I have all my wonderful apps on my s4, I want to be able to use them by using the LG phone as a tether and calls not much else BUT CM10.1 tethering does not work, so i find myself flashing rom after rom, avatar rom, older CM mods, none would turn on tethering, so i flashed a modded version of MIUI for this phone and it worked except for ONE thing no signal, tethering turned on just fine so i decided to look around for other roms and found Slimrom TRYED to flash it didnt work, try to flash actual MIUI roms off there site, didnt work, met with an error in CWM Recovery after some searching I found its because Im running the OLD Bootloader -_- THIS is the issue im having IF MIUI does NOT work is it possible to downgrade the bootloader again so i can restore my CM10.1 backup? I have been working at this for a week, if there is something here about this can someone please just point me at it? I would appreciate any help.
On a side note i DID soft brick the phone the other day and found a program called nvflash witch flashed an install of CM mod. Dont know if that will help any.
Click to expand...
Click to collapse
I really do not understand how other ROMs deny Tethering. Did you flash the latest 2.x kernel by pengus77 after installing the rom? Did you make a clean install(wipe everything then install)? On the other hand, yes you can switch bootloaders as much as you like, just remember that changing the bootloader wipes everything on your internal memory, so do a backup. Did you try just plain old stock 4.0.4? Should work there. Ask anything you want, if you're still having questions.
NoDze said:
I really do not understand how other ROMs deny Tethering. Did you flash the latest 2.x kernel by pengus77 after installing the rom? Did you make a clean install(wipe everything then install)? On the other hand, yes you can switch bootloaders as much as you like, just remember that changing the bootloader wipes everything on your internal memory, so do a backup. Did you try just plain old stock 4.0.4? Should work there. Ask anything you want, if you're still having questions.
Click to expand...
Click to collapse
As to the flashing to stock i lost the original rom backup i had made along time ago and cant find the original firmware anywhere online. When I flashed CM 10.1 I just ran with it, when i go to try tethering it says "Turning on portable wifi hotspot." and it stays on that no matter what untill i restart, left the phone running for 2 days once and that was still stuck on that before i restarted. As for flashing a 2.x kernel i had no idea about that. But yes when i did the installs i would do a clean wipe and install. Most of what i read online led me to believe that there was an error with CM 10.1 nightlys that was not being fixed for the tethering. So that is why i decided to go to another rom. Two questions one how do i go about finding the original firmware for this phone and two how would i go about updating or downgrading the bootloaders and could i be pointed to the files please?
Jeffril said:
As to the flashing to stock i lost the original rom backup i had made along time ago and cant find the original firmware anywhere online. When I flashed CM 10.1 I just ran with it, when i go to try tethering it says "Turning on portable wifi hotspot." and it stays on that no matter what untill i restart, left the phone running for 2 days once and that was still stuck on that before i restarted. As for flashing a 2.x kernel i had no idea about that. But yes when i did the installs i would do a clean wipe and install. Most of what i read online led me to believe that there was an error with CM 10.1 nightlys that was not being fixed for the tethering. So that is why i decided to go to another rom. Two questions one how do i go about finding the original firmware for this phone and two how would i go about updating or downgrading the bootloaders and could i be pointed to the files please?
Click to expand...
Click to collapse
Okay, This is SFSP by @sgspluss which is a pretty fast, stable and battery-friendly slimmed down version of stock ICS. It is available for both Old and NewBL, so you might want to try that first. This is AIO Toolkit. I know that you've used it and bricked your phone, but try again, and for the love of God install the nvflash drivers because most people skip that part. You have to do it manually and if you're running Windows 8 you need to disable Driver Signature Verification. But yeah, you switch bootloaders with this.
As per title, no other rom/recovery now works on my device.
Only reason I keep coming back to this rom is because my phone no longer boots MIUI due to me attempting to fix IMEI (Worked on BananaDroid).
I want to swap to another rom/recovery because this one is super laggy and keeps killing my apps when im using them, but the phone doesnt boot any other recovery/ROM.
Any idea why that would be? (Even re-installing stock rom through fastboot doesnt work.)
Since I didn't understand exactly which rom you currently have, I hope I can help you with my advice. Have you tried to install stock rom with mi flash? I've never had any problems this way.
boofiboi said:
As per title, no other rom/recovery now works on my device.
Only reason I keep coming back to this rom is because my phone no longer boots MIUI due to me attempting to fix IMEI (Worked on BananaDroid).
I want to swap to another rom/recovery because this one is super laggy and keeps killing my apps when im using them, but the phone doesnt boot any other recovery/ROM.
Any idea why that would be? (Even re-installing stock rom through fastboot doesnt work.)
Click to expand...
Click to collapse
I fixed it by flashing MIUI android 11 then doing all my custom rom stuff.. I have no idea why it doesnt work when you have android 12 MIUI, different vendors ig?