I just performed a fresh installation of the MIUI RC5 on my i9000 and Have a few problems.
1. My network provider is not being recognized at all. (Even after a couple of restarts)
2. My IMEI is not being displayed. (Even after deleting the efs folder using Root Explorer.)
So please respond immediately as I wish to continue using this ROM.
Thanks in advance
you have to restore the efs backup that you should of made before the installation.
that will restore the IMEI and give you network coverage.
if you cant do that, re-flash the ROM, and if it still doesnt work, you will have to flash back to froyo with pit and repartition and start the whole process again.
Thx a lot dude. Trying it right now. Hope it works *fingers crossed* http://media.xda-developers.com/images/icons/icon11.gif
I tried to install MIUI through Rom manager and now the phone just flashes SAMSUNG but never boots up. I have Infuse-rooted-CWM installed. Please HELP
Thanks
Galnet MIUI v4.0
WIFI Sleep policy does not seem to work. It is set to sleep when screen is turn off, but it never turn off. This is draining up the phone battery. Any one any idea?
chrisanddarla said:
I tried to install MIUI through Rom manager and now the phone just flashes SAMSUNG but never boots up. I have Infuse-rooted-CWM installed. Please HELP
Thanks
Click to expand...
Click to collapse
So you have the Samsung Infuse? Because this is the Galaxy S forums and I don't think Miui is even available on the Infuse so no wonder it isn't working(and the way you installed it isn't the correct procedure anyway). You can probably install a fresh official rom for your phone some how through odin but I'm not familiar with the Infuse. Best to go to the Infuse forums and ask. Hope this helps
galnet v4
hi!
i have problems with my MMS. i cant send my MMS messeage..only recieve..
anybody help ?
Related
OK.. First of all I want you to know that I'm not a n00b and that 99% of the cases I know what I'm doing with my phone but this is a weird one
Problem no.1: The simcard keeps on "disconnecting", resulting in disconnection from the network. Since the first seconds I start the phone it does this. Sometimes it doesnt even accept my PIN as being incorrect, but in the notification bar the SIM+! icon disappears for a moment. This is after I screwed a ROM and returned to stock using the OCD JF6.
Problem no.2: It wont master clear! No matter what I do, it wont do it. I tried since the first second when ODIN detects the phone. I tried it when it fully loads the ROM, it just wont go.
Background: Before, I had installed Froyo JPA i9000 ROM with Reoriented kernel 2.1.2 (voodoo lagfix+color,bln). Everything was soooooo fast on that ROM (with around 100 apps installed) but I wanted to theme it. So I tried to deodex it using xUltimate. I followed the (logical) instructions found in a post here and it didnt want to boot anymore... well, it did but in a FCs symphony.
I did what I believed is right and I returned to stock but I forgot to pull out the SIM card... then these problems appeared.
Gimme a hint what could I do. I'm asking first here because a working PDA without a SIM is .. acceptable but a totally bricked one is worse so before I take any steps further I need your opinion.
Thanks a lot.
No one?
Sent from my SAMSUNG-SGH-I897 using XDA App
icezar1 said:
OK.. First of all I want you to know that I'm not a n00b and that 99% of the cases I know what I'm doing with my phone but this is a weird one
Problem no.1: The simcard keeps on "disconnecting", resulting in disconnection from the network. Since the first seconds I start the phone it does this. Sometimes it doesnt even accept my PIN as being incorrect, but in the notification bar the SIM+! icon disappears for a moment. This is after I screwed a ROM and returned to stock using the OCD JF6.
Problem no.2: It wont master clear! No matter what I do, it wont do it. I tried since the first second when ODIN detects the phone. I tried it when it fully loads the ROM, it just wont go.
Background: Before, I had installed Froyo JPA i9000 ROM with Reoriented kernel 2.1.2 (voodoo lagfix+color,bln). Everything was soooooo fast on that ROM (with around 100 apps installed) but I wanted to theme it. So I tried to deodex it using xUltimate. I followed the (logical) instructions found in a post here and it didnt want to boot anymore... well, it did but in a FCs symphony.
I did what I believed is right and I returned to stock but I forgot to pull out the SIM card... then these problems appeared.
Gimme a hint what could I do. I'm asking first here because a working PDA without a SIM is .. acceptable but a totally bricked one is worse so before I take any steps further I need your opinion.
Thanks a lot.
Click to expand...
Click to collapse
Problem 1: can probably be fixed by reflashing stock with the SIM card *not* in the slot (that's about my only guess, never seen that).
Problem 2: master clear must be done with the phone turned on *NOT* download mode. the phone must be fully booted with adb debugging enabled in settings.
xUlimate: it's a poorly written application and it's success ratio is probably about 50/50, another tool to look into is auto-deodexer. Also, both the framework AND the system apps need to be deodexed to have everything play nicely (gtg taught me this one)
id experiment. from what i gather you were able to flash jf6 but it was a bad flash. does it still have download mode? maybe try to flash again and then try to master clear? maybe try to flash another rom, then try to flash back to stock?
this doesn't sound like anything anyone has seen before so your best bet is to just try something.
Thanks a lot for the replies guys!
The master clear was tried from all phone statuses (booting; finished booting; after the phone operated for a while) except download and recovery (i know is not suppose to be done from there).
I did reflash to stock without the SIM, same issue.
I will try flashing again some other rom. I'll try more and ill post the result here
Sent from my SAMSUNG-SGH-I897 using XDA App
OK, so, it seems that for some reason, after stock restore there were still remaining of XEE CSC in the phone..
I loaded the JPA back and now is all fine.
I am having the same issue, unable to clear with CWM or odin, or within the OS in either the stock rom or axura 4 or 5...
Can you please elaborate on your solution?
CSC looks familar to me, thats an ODIN file right? If so, what part of the phone would that be (kernal, modem, OS)?
What do you mean by load JPA? Odin package or CWM? WHole rom or specific parts.
thanks...this has got me stumped
Well, my issue is that I cannot use 2.1 anymore (any 2.1, tried stock Captivate and JM8 from i9000), I don't understand what is wrong but my first bet is that the /efs partition got changed in some way when I loaded JPA i9000 ROM.
Froyo works fine, any ROM I load give me full functionality but on 2.1 the SIM gets disconnected all the time and after a while the phone reboots by itself. Just to make it clear, I never had the usual Captivate reboot issue, it started when this SIM problem appeared.
Note: my product codes are fine, in both nv_data.bin and nv_data.bak the product code is finishing in ATT and my IMEI is available in both 2.1 and 2.2 and is correct, so no IMEI corruption here.
Could someone give me a hint?? Would flashing to stock with phone EFS clear help?
Hi,
Have tried to read up few threads but none seems to have similar problems.
Had install MIUI 2.3.4 for Galaxy S - v1.5.27 rom successfully, running great and etc.
One issue, every time I reboot or power off/on the phone will go back to android welcome screen asking for gmail account set up and lose all settings.
Does anyone have similar experience that have found solution ? Great ROM, would like to keep. But it will be annoying to lose all settings every time I reboot or turn off my phone.
You guys advice would be kindly appreciated.
M
Hmm, this is pretty bad. You will definitively have to reflash. Did you follow the directions well? Most of these ROMs ask of you to flash a stock firmware before flashing with clockworkmod, so did you? Read up well on the instalation instructions and reflash. If the problem persists, then reflash another ROM.
Hi guys,
I'm being annoyed by my SGS about his data connection. Hope someone could help me!
Few days ago I flashed MIUI Mintberry 2.1.20 and everything was working like a charm, but this morning data connection switch failed several times.
I've tried to wipe everything, re-flash Mintberry and even to flash JVU stock with Odin, but I still can't switch on my data connection.
I can't even see any icon on the status bar.
Any idea? Is my phone broken?
kpaolo said:
Hi guys,
I'm being annoyed by my SGS about his data connection. Hope someone could help me!
Few days ago I flashed MIUI Mintberry 2.1.20 and everything was working like a charm, but this morning data connection switch failed several times.
I've tried to wipe everything, re-flash Mintberry and even to flash JVU stock with Odin, but I still can't switch on my data connection.
I can't even see any icon on the status bar.
Any idea? Is my phone broken?
Click to expand...
Click to collapse
Hmm this is strange, so you turned data on but theres no symbol, right? Have you tried installing another kernel (maybe also applying the Kernel Cleaning Script)?
I' ve tried everything with Odin, and at the moment I have a beautiful black screen of death.
Odin cannot recognize my phone... I'm very frustrated
EDIT: Upgrading Kies'drivers, I managed to connect the phone with Odin again, so I've flashed the lastest official stock firmware to check my antennas. In the worst case, I'll be able to go to the shop for assistance without problems.
Have u tried typin ur apn maually?
Sent from my GT-I9000 using xda premium
Sounds like a settings issue. Never heard of anyone have this problem before - I've flashed every version of mintberry including betas.
I just had this issue
I just had this and figured out what is wrong, its a easy fix too! Just go to settings and wireless and change the access point for your mobile connection. I had 2 access points and just switched it to the other one and my data started working again!
Hope I could help
Hi guys! thank you for all these answers!
I've tried to set APN manually, to change custom ROM and custom kernels and coming back to stock too, but still no data connection icon (neither data connection itself).
At the moment, I'm on JVO, the latest official italian firmware, everything is fine but 3g data connection.
Other ideas? Shall i need of Samsung customer service (I hope no!)?
Solved...
MIUI default settings fault: SMS notification has ran out my money and my provider has blocked 3g connection.
My phone is safe!
Hi guys,
i have been using Krarvind's Slim ICS 3.5 for about 10 days and I absolutely loved it. I have just updated to 3.6 which caused my phone to bootloop
So, after an hour or so of labouring and trying to work my way back in to it i'm now back on 3.5, but I have absolutely no signal/3G coverage. Wi-Fi works no problems, just no signal!
I went in to the APNs and there is nothing there - I tried to save a new APN and it wont let me - has anyone encountered this before?
Thanks in advance
Haven't experienced this myself but a few things come to mind...
First would be to check if you imei number correct? If not you would need to restore this from a backup.
If IMEI number appears correct then I would try flashing the modem again or a different modem. Modems found here: http://forum.xda-developers.com/showthread.php?t=1158783
If this doesn't work you can try flashing 3.5 base and essentials again.
If that doesn't work search the threads and google or hope someone else can give you an answer. If you don't find any help then as a last resort you can flash a stock rom with Odin although I'm sure there must be an easier way.
wondersteve said:
Hi guys,
i have been using Krarvind's Slim ICS 3.5 for about 10 days and I absolutely loved it. I have just updated to 3.6 which caused my phone to bootloop
So, after an hour or so of labouring and trying to work my way back in to it i'm now back on 3.5, but I have absolutely no signal/3G coverage. Wi-Fi works no problems, just no signal!
I went in to the APNs and there is nothing there - I tried to save a new APN and it wont let me - has anyone encountered this before?
Thanks in advance
Click to expand...
Click to collapse
I've had a similar problem, the updating to 3.6 just went wrong. No bootloop but loads of FC.
My solution has been going back to recovery, do a full wipe (wipe data/restore factory settings) and install 3.6 again. Everything seems to work now but I have to re-install and configure all my apps... :-(
Hope it helps...
Check in About > Phone
Under baseband does it say UNKNOWN ?
this happened to me once, need to reflash the modem. No need for wipes etc
Hi
My Phone details are as follows
Samsung Galaxy S i 9000
firmware version 2.3.6
kernel 2.6.35.7-I9000DDJVB
I am trying intsall the new room by following instructions from here at thedroidcity.com/galaxy-s-gt-i9000-upgrade-to-official-jellybean-4-2-1-firmware
But not able to root . What ever application I used ( gingerbreak, root with restore, CASUAL-PublicBeta4, ROM Manager , super oneclick,InitialCFRootFlasher, mtofail) I am never successful in root my phone. Always the applications go unending with message that files are read only and su can be copied. Even I tried mount system(r/w, r/o). Not much use
Request team member to help me in understanding how to root this phone and install the latest rom ( Hope the jellybean 4.2.1 is the latest )
Thanks
Ishwar
http://www.youtube.com/watch?v=PwHVm90HO1w&list=UUawwqTCK5egDfXdJe3EH0XQ&index=18
http://www.youtube.com/watch?v=2DLySUtI8vo&list=UUawwqTCK5egDfXdJe3EH0XQ&index=15
http://www.youtube.com/watch?v=1RoZU5ZPMS4&list=UUawwqTCK5egDfXdJe3EH0XQ&index=13
http://www.youtube.com/watch?v=iRnH13sRAIc&list=UUawwqTCK5egDfXdJe3EH0XQ&index=9
http://www.youtube.com/watch?v=k_iFf8kyf4I&list=UUawwqTCK5egDfXdJe3EH0XQ&index=7
check out these videos you have to go cm9 ,cm10 ,then jb happy flashing ps theres another two guys below who do great vids some of them are like two years old but they do help
http://www.youtube.com/results?search_query=totallydubbed
http://www.youtube.com/user/HDTechVideo
Thanks a lot. I will see the videos and try rooting
Regards
Ishwar
Hi
Everything went well.thanks. but now i have new issue .It displays error can't connect to network right now. please try again. I tried a lot . but still the problem persists. my phone is unlocked phone and so is my sim
pl help
regards
ishwar
go back to xxjvu then do it all again from there i had same problem and remICS 4.2.2 working for me
Thanks the problem is solved I have upgraded to 4.2.2. HAve a strange problem now.I have contacts updated from my gmail and they all appear in contacts. Same is not accessible while messaging and calling. Any suggestions
Thanks a lot
Regards
Ishwar
TIGER 123 said:
go back to xxjvu then do it all again from there i had same problem and remICS 4.2.2 working for me
Click to expand...
Click to collapse
chech settings of dialer - somewhere there'll be which contacts are shown
you could try wiping your dalvic and cache just and reflash the rom if you dont get any other solution
Thanks a lot. I reflashed ROM and now the problem seems solved. But issue now is that it is taking time to connect to 3g netwrok and I need to struggle a lot a connect( switch on/off airplane mode, installed 3g manager, reset settings). Is there any solution for this
Thanks
Ishwar
TIGER 123 said:
you could try wiping your dalvic and cache just and reflash the rom if you dont get any other solution
Click to expand...
Click to collapse
where is the lockscreen file of a rom?and whats its name?
and the wallpapers of the rom?