Windows 7 portable - Off-topic

my core i3 4gb ram laptop is only a year old but takes awhile to boot, even after a fresh windows 7 install and no bloatware. my netbook has a ssd and it flies. is it possible to put win 7 on a usb drive & run it from there? i was thinking about replacing the laptop hdd with a ssd but (1) i must disassemble the laptop down to the mobo so it will be a huge pain the ass, and (2) i would go from 500gb to 128gb storage. it would be better to simply run win7 from a usb stick. has anyone done this?

lol .... first of all u prolly cant change the ssd of the netbook to have it run on the lappy ... it may be with a special (zif) connector or a form factor of mini pci-e card .
second , the usb drives speed is nowhere comparable with an ssd .
third , using a portable os for everyday work would be a humongous Pita .
fourth , year old model 32gb ssds are still very good and come for dirt cheap . most lappys have two drive bays , you can keep the hdd for data , or just ditch the dvd drive(havent had a dvd drive in my comp for 5-6 years)

Related

HDD transplant?

I'm finally replacing my dell inspiron 600m with a shiny lenovo x61. the x61 comes with *shudder* vista, so i want to downgrade to xp. Problem? the x61 has no cd drive. my plan is to replace the hard drive of the 600m with the x61, install onto the x61 hard drive, and then replace back into the x61.
Would there be any problems with this? Baiscally, i'm just doing a clean install of xp onto the x61 hard drive. Are xp installs dependant on hardware? I would just use the generic drivers that are installed with xp.
In case you wanted to know, here are my x61 stats
Core 2 duo- 2.2ghz 800mhz FSB 4mb L2 cache
2gb DDR2-5600 RAM
12.1' XGA screen
120gb 5700rpm HDD
Lenovo wireless abg
Intel X3100 integrated graphics
Crappy size appropriate sound card and speakers
I got it for $850, i saved $600. Coupon codes ftw! </bragging>
it wont work, the second you put back the hdd in your x61 it will BSOD . Because of the different drivers of the different drivers, your best bet is to get a external USB CD/DVD drive and use it with the x61 to install windows.
i thought the hard drive access drivers were generic to some extent
StashCompInc said:
it wont work, the second you put back the hdd in your x61 it will BSOD . Because of the different drivers of the different drivers, your best bet is to get a external USB CD/DVD drive and use it with the x61 to install windows.
Click to expand...
Click to collapse
I agree......spend some of the $600 you saved on a USB CD+DVD/RW drive - you're bound to need it at some point
Moving drives between machines is a bit of a black art - sometimes it will work (and you'll just need to reinstall all the hardware specific drivers) and other times it will BSOD or just hang part way into the boot. Can you not borrow a USB CD drive from someone/somewhere just to install XP with (and to use to copy the CD contents to the hard disk - or at least the "i386" folder - you KNOW you'll need it again )?
That's just my opinion - IMHO it would be so much quicker to install in place rather than messing about for hours/days doing it some other way....
Mark.
eh ok, i'll get one. good point about my $600 lol.
A core 2 duo will install wayyy faster than a dothan anyway.
in other news, this is one of the few threads i've made where i've gotten 2 responses wtihin a day of creation. cheers to y'all

SATA Hdd help!

Hi
Following on from my last thread.. I have a 320gb western digital sata harddrive that i want to install win 7 on. So i set the sata to second boot device and have the dvd drive set to first boot. It loads into the dvd but it takes a while. At 22:47 it is "Expanding Windows Files (0%)" So its taken 10-20 Minutes to get to this stage. So why is it slow on SATA, And fast on IDE? (my ide drive is a wd 80gb)
thanks
flyboy
So i got it installed and it goes to starting windows and then Setup is updating registry settings then...
Blue screen:
Something like ****STOP 0x0000008E (that code is right)
then underneath:
Win32k.sys
whats that mean?
thanks
flyboy
question: to what is your DVD drive connected - S-ATA or IDE?
question: if you set the machine so it boots your normal system - does it still work or does that come up with an error too?
It sounds like you have files on the Windows 7 install disk that are corrupted - a blue screen and stop error, indicating a *.sys file, usually means that either the system cannot find that file or it is corrupted (Win NT servers at one of my old workplaces used to throw that sort of fit fairly often).
The long time it took to work might be as a result of the system trying again and again to read the problem file and then giving up - with microsofts usual skill at installation s/w it would show the process as completed - but when you try to run the OS it falls over.
You could either try and re-install from another copy of the Window 7 installation disk - or if you have access to a system running Win7 you could try and find the file its unable to find and manually copy it to the correct location and see if that solves the issue.
It may take more than one transferred file to solve the problem and it may leave your Win7 installation a little flakey, but it would be quicker than restarting from scratch.
Hope that helped
Jemma
@flyboyovyick2k9:
Need a few details about your system to be able to provide some guidance. Also would help to get the values that appear after - ex: STOP 0x0000008E (xxxx, xxxx, xxxx, xxxx).
Here are some details that would be helpful - worded them in question form:
1) OEM or home grown system? If OEM, brand & model. If HG, Motherboard manufacturer & model.
2) Does the system/motherboard support SATA or eSATA?
3) Does the system/motherboard BIOS have an option for AHCI or ATA?
4) If the BIOS does support AHCI, was it necessary to provide a driver during the Windows installation (ex: Intel Storage Matrix - TXTSETUP.OEM) ?
5) If you were able to install Windows to completion, were you able to install the Chipset and any sub-system (ex: Intel Storage Matrix) driver before restarting the system.
6) Are the firmware levels at the most recent (non-BETA) versions - BIOS, HDD, etc.
7) Does the HDD report as ok when running the WD Diagnostic tools?
8) Are all of the hardware components installed in the system compatible with this version of Windows?
9) Does the RAM report as ok when running a memory diagnostics tool (ex: Mem86, etc.)
10) What is the wattage of the PSU (power supply) in the unit?
HTH,
Right here goes,
The spec of my pc is in the signature. the psu is a Coloursit 550w.
Yes my board does support sataII.
The installation i have got works because i have just install it on my compaq evo laptop, and it works fine.
My normal machine boots fine without the sata drive connected but is a tiny bit slower when it is connected.
It has the latest bios. And is a homebuild. Not sure about the ahci or ata thing.
I have had a look but cant find it.
And yes i did get 4 other codes in brackets after the main one. Not sure if i can generate them again but will try.
The windows installation was fine on the ide. I did clone that drive to the sata one and it was fine but SLOW!
I could try and load the drivers for the sata in the windows installation.
thanks
flyboy
Hadn't noticed your siggie the first time around and after clicking reply, the siggie isn't visible ... my bad.
Had a quick look at the N68-S manual - looks like the systemboard supports SATA/SATA II. I haven't looked at AMD in quite a while so I'm going to assume that ATA/AHCI are intel specific technologies ... not sure if these translate to SATA/SATA II. What is the WD model of your 320 GB?
At first guess, it would seem that the issue could be related to a BIOS mis-configuration or a missing driver package post-Windows install. After cloning the partition, were you able to startup the system with only the WD HDD connected? If not, that could be an indication that Chipset/RAID/SATA drivers may be missing. That said, if you have the patience, it would be worth trying a clean install of Windows directly to the WD HDD to eliminate the possibility that the cloning software is messing up the partition structure.
Cheers,
Reference url's
Systemboard
http://www.asrock.com/mb/overview.asp?Model=N68-S
Downloads (Win7)
http://www.asrock.com/MB/download.asp?Model=N68-S3&o=Win7
Could be bad MOBO, HD or Media. Go buy a chep sata hd. If you get the same problem, Get a new disk, same thing, then RMA your mobo.
My Win7 installation got corrupted just by trying to come back from hibernate. Suggestion was that I had to insert installation disk in DVD drive and go through the installation recovery process which would copy the missing files back to hard disk and recover the system. It did the trick for me. It might be worth a try.
Well its not a bad motherboard because i would have took it back (lasting 6 months that is) And it was new when i bought it from Aria.co.uk for £32.
The drive is:
WD Caviar Blue/SE/SE16 (SATA II)
WD3200AAKS
Im just cloning the hdd again now because i run some tests and it came back fine. So just waiting on that. Mean while im using my laptop.
thanks
flyboy
Few more questions:
What product are you using to clone the HDD?
Before cloning the HDD, did you boot Windows with the WD HDD connected to the system?
Pertaining to the second question; connecting the WD HDD in the pre-clone instance of Windows would allow for the plug-n-play manager to detect the HDD and install the native Windows drivers.
I'd even go as far as to install the latest set of drivers for the entire system if you haven't already.
Additionally, confirm that Device Manager doesn't display "Unknown Devices" or "Disabled" devices. Address any device related issues pre-cloning.
Cheers,
The sata and ide drives are both installed in device manager. And i can access them. And write to them. But the read/write on the sata is 0.1xxx mb/s and on the ide is 100 or 200 mb/s.
EASEUS Partition Master. Does the same job as paragon.
thanks
flyboy
Hmmmm ... very strange ...
I'm going to assume the following points for the pre-clone image;
The WD HDD is at the latest firmware.
Jumper settings on the WD HDD are correct (http://wdc.custhelp.com/cgi-bin/wdc....php?p_faqid=1400&p_created=1134597011#jumper).
A SATA II compatible cable is being used.
Drivers were installed in the pre-clone version of Windows.
The BIOS is configured as recommended (ex: not overclocked for the moment).
If the WD HDD is underperforming before cloning the partition, I suspect that there may be a hardware incompatibility or the WD HDD is failing. There's no point in cloning the partition until you are able to obtain satisfactory performance from the WD HDD.
If the performance degradation is post-cloning, I would try a fresh new install of Windows directly to the WD HDD.
Cheers,
Could it possibly be that all the blocks on the hard drive are bad?
Also on the hdd it says that sata doesnt require jumpers, it does it.
thanks
flyboy
Assuming the following ...
The WD HDD Diagnostic reported that there was no issue with the HDD.
The jumper setting(s) for the HDD transfer mode is correctly set - 1.5/Mbps VS 3.0/Mbps.
A net new (clean) install of Windows to the WD HDD.
... and it's still running slow, I'd be looking to try a different HDD. If you experience the same issue with a different HDD Manufacturer/Model, I would start looking at the remainder of the hardware on your system.
Cheers,
Tryed installing windows 7 again, still slow erm. Ye i was just considering buying a new hdd.
Well im taking my pc to my uncles in february so he might be able to help me. Because we are doing a pc build for my 2nd cousin.
thanks for your help.
flyboy

IT/Linux Experts!! [Pls Help] Trying to recover data on a NAS Drive

Long story short:
- I have a Lacie 2TB NAS drive, drives are RAID 1 mirrored.
- Mainboard took a crap
- Drive is under warranty but Lacie won't warrant data recovery, only unit replacement
- I know at least 1 of the 2 drives is fine and would like to recover the data on them
- I also know the Lacie runs a modified version of Linux OS
-The drives partitions/files were all password protected, which I have the L/P of course...
Is there anyway I can connect one of the SATA drives to my desktop to recover the data? I know how to connect them but would it be encrypted or even make sense to a Windows 7 machine? The recovery company's I received quotes from want $600+ Ridiculous!
I'd plug it into your computer and find out, I'm sure it's a SATA drive. if it isn't readable in win 7, grab a live linux distro. with everything password protected that will make things annoying though.
I would say the password protection could give you some trouble. Plug them in your computer first and see what you get on either Windows or Linux and then report back.

[Q] USB disrupts other USB devices?

Basically, if I plug my Nook into my desktop, it disrupts my wireless USB card. It doesn't matter what I'm under (CM7, 'Stock', Froyo, Honeycomb, etc) it does it every time. IE: I plug in the Nook and my USB card becomes unresponsive, remove the Nook, remove the card, plug the card back in and I'm up and running again. I can plug anything else in, external passport, my Droid X, etc and everything is fine.
This is limited to my desktop only, as I can use my Nook like normal on my laptop (XPS M1530). The basics of my desktop config is below, if something you need to know is missing just let me know. Thanks!
Antec 902 Case
Intel I7 950 CPU (Stock clocks)
Asus PX58D Premium MB
Intel 510 SSD 128Gb HD
EVGA GTX 580 Video Card
6GB Corsair RAM
Razer Death Adder mouse
Razer Tarantula KB
Netgear N600 dual band USB card (NOTE! This situation repeats itself even using a different USB Card IE: 2 other Linksys cards as well!)
Win7 Professional x64 bit
Anyone else experienced anything as strange as this?
Signed,
Dazed and Confused.

Can i use surveillance Harddisk in desktop PC???

So i am having a dualcore pentium operating Desktop with 500GB toshiba hdd which will be down in the following days so i need to backup my data and change to another one ... i am looking for harddisk which has better lasting period .. i found that the seagate skyhawk are designed to last longer as they are used in surveillance camera systems ... so i am asking that can i use them in my desktop pc ... i used to see that these hdd has slower readspeed .. is there be any issue if i use it ... if anyone of u have used it please give your suggession....

Categories

Resources