Ok. One gracious member of this forum is already helping me on PM, but he hasn't signed on in a bit, and I kinda need a working phone, so I'm asking for any help that can be provided. Here's my situation
Went from CM 4.2.1 to 4.2.2 via the CMUpdater. All good. Then, like a moron, I flashed what I thought was the latest Hero theme by Ultra Spikey. I reboot, and it gets stuck on the Android boot screen (I waited about ten minutes, maybe should've waited more). I reboot into AmonRa's Recovery, wipe, and re-flash 4.2.1, which I still had on my SDcard. Goes into an infinite boot loop after loading to the main lock screen. Then, genius me, I wipe three times (data, partition, and davliK) reflash 4.2.1, and now I get Force Close on the setup screen. AndroidAppCritic tells me its cause Ive lost the proprietary Google bits. Needless to say, the phone continuously reboots again. He also tells me I probably just need a Linux swap partition, so I RE-FORMAT MY SDCARD with fat32 and ext2 and swap. Duh. Now I realized I have NO zip files to flash, my sdcard is basically wiped clean. I can't flash to anything because I have no files to flash to, and I can't get the phone to any functional status because it won't get past the setup wizard, so I can't add any zip files to flash.
How screwed am I?
As always I appreciate any assistance from anyone.
Go to the CM 4.2.2 thread, download the HTC update file and the CM 4.2.2 file and put them both on your sd card.
reboot into recovery and flash them both again.
Edit...you can put the files on your sd card by using the mount usb option from amon-ra's recovery.
I have been playing with HC, CM7 etc on my Nook color and decided to go back to running auto-nooker on top of stock, but I want to keep the SD CWR image I made, which has a lot of free space for me to play with future ROM. Has someone packed an CWR zip for auto-nooker?
Thanks.
mathfeel said:
I have been playing with HC, CM7 etc on my Nook color and decided to go back to running auto-nooker on top of stock, but I want to keep the SD CWR image I made, which has a lot of free space for me to play with future ROM. Has someone packed an CWR zip for auto-nooker?
Thanks.
Click to expand...
Click to collapse
BOOM Wining.
http://forum.xda-developers.com/showthread.php?t=932145
therealguppy said:
BOOM Wining.
Click to expand...
Click to collapse
LOL. Thanks.
My current ROM is phiremod nook V4.1. After flashing this and reboot. The Nook U picture flashes, then it's flashing "A N D R O I D _" prompt at the lower left and nothing...
There are three of us currently stuck on that damned android_ screen right now. As I posted in the other one if you get out of this please post your steps!
I reflashed phiremod nook V4.1. That boots pass ANDROID_.
Hmm maybe this is due to CM7 using EXT4 and stock using EXT3,
after flashing the Stock restore also try flash the Restore Boot Partition..
http://forum.xda-developers.com/showthread.php?t=914690
At the bottom of the first post on this one you can find the Restore Boot. which restores Stock B&N boot.
I already did that. Right now as I turn it on, it displays the "Touch the Future of Reading" line instead of the "Loading..." line from CWR. Or do you think this is not sufficient?
There is message when installing repartition-boot-with-stock.zip:
"This will install stock boot 1.0.1 Eclaire --- This won't boot with Froyo!"
Can this the issue too?
EDIT: During the 5 minutes delay b/t post, I installed repartition-boot-with-stock.zip and Nook Color-v1.1.0-r2.zip, now it boots and stucked at the Nook icon with the "Contain Reader Mobile by Adobe" line.
Okay, so I restore stock image, albeit 1.0.1 using images form this page:
http://forum.xda-developers.com/showthread.php?t=919353
Steps:
1. download/extract boot.img and system.img to bootable sdcard (with CWRv3.0.0.6)
2. boot using sdcard, mount /sdcards
3. use adb to dd the image as described in article.
4. repeat failed boot to force recovery.
I thought this would restore /system and /boot ext3 again, but it doesn't...still getting stuck at "ANDROID_" prompt after reflashing the Nook Color v1.1 above. I am going back to CM7...sigh...
EDIT: Actually, it DID work! My problem was when I reflashed Nook Color v1.1-r2.zip, I wiped system and data, which I shouldn't have.
therealguppy said:
Hmm maybe this is due to CM7 using EXT4 and stock using EXT3,
after flashing the Stock restore also try flash the Restore Boot Partition..
http://forum.xda-developers.com/showthread.php?t=914690
At the bottom of the first post on this one you can find the Restore Boot. which restores Stock B&N boot.
Click to expand...
Click to collapse
FYI I've been in the same boat as you a couple of times now with my Nook not wanting to boot. And it seems it gets to different points each time before locking up and not booting. I'm starting to think the same thing as your comments here. This whole ext4 stuff is what seems to be causing issues for a lot of folks specially when wanting to go back to a different ROM or stock. To further compound it is the fact the newest CWR is 3.0.1.0 and all bootable sdcard files are still 3.0.0.6 or 3.0.0.5. With that said I can tell you making a backup using the 3.0.1.0 CWR that is on the internal mem and then getting stuck booting is no good. Reason being from wha tI've found so far is if you take your 3.0.1.0 backup and put it on a bootable sdcard that has 3.0.0.6 so you can restore, it does not work right from what I've found. The only way I've found to fix it easily so far is to first flash the " Remove CWR * .zip from the link posted here. After that then flash the repartition-boot-with-stock.zip file. Once I've flash those 2 files I'm able to flash a new ROM and have it boot like it should.
Another way I've got around it was to power the device on into recovery with no sdcard in the device. Once it booted into recovery ( ie CWR 3.0.1.0 ) I put the sdcard in the device that had my 3.0.1.0 CWR backup. I restored that backup using the actual 3.0.1.0 recovery from internal mem. Once finished tried to boot and it got stuck. When it did I then powered it down and fire it back up but this time booting to the sdcard and then I flashed the repartition-boot-with-stock.zip and it would finally boot up like it should.
Bottom line IMO at least is it seems to be hit or miss on what is the best way to get it back up and running after the boot partition gets hosed. And that can make it a bit frustrating.
Sorry I don't have time to read all of this. Just keep in mind that > 3.0.0.6 formats to ext4 (ie CM). For stock and froyo, use 3.0.0.5 to format to ext2 and 3..
System, data and cache need formatting before flashing a new rom.
Repartitioning boot is only useful if your NC doesn't boot.
Sent from my HTC Desire using XDA App
thought 3.0.1.0 was supposed to work for everything.
Hey guys,
I had a nook and autonooted it. So i'm familiar with that process. However, I returned that nook and got a new one and decided to phiremod it. So with this brandy new nook, I:
turned it on
popped in my clockworkmod sd card
formatted /system and /data
installed phiremod 4.1 from .zip
Failed to install.
What did I do wrong? I can't even get this thing into recovery!
ambogt said:
Hey guys,
I had a nook and autonooted it. So i'm familiar with that process. However, I returned that nook and got a new one and decided to phiremod it. So with this brandy new nook, I:
turned it on
popped in my clockworkmod sd card
formatted /system and /data
installed phiremod 4.1 from .zip
Failed to install.
What did I do wrong? I can't even get this thing into recovery!
Click to expand...
Click to collapse
Make sure you are using the Newest CWR image you need to use a CWR that has EXT4 support to install CM7
CWR 3.0.1.0
http://forum.xda-developers.com/showthread.php?t=971197
Ahhh interesting...sucks that the link to it is down.
Also, my nook gets hung up at the stock "n" boot screen after following these instructions: http://forum.xda-developers.com/showthread.php?t=949699
Is that norm?
ambogt said:
Ahhh interesting...sucks that the link to it is down.
Also, my nook gets hung up at the stock "n" boot screen after following these instructions: http://forum.xda-developers.com/showthread.php?t=949699
Is that norm?
Click to expand...
Click to collapse
no, what did you do step by step?
O yeah, since the main link is down to CWR you can try this Modified earlier one that support EXT4, it was the first one to do it and still works fine
http://forum.xda-developers.com/showthread.php?t=959240
It's in my first post what I did step by step.
I'm going to try to install CM7 to eMMC now. Obviously restoring is failing...
ambogt said:
It's in my first post what I did step by step.
I'm going to try to install CM7 to eMMC now. Obviously restoring is failing...
Click to expand...
Click to collapse
O i though you said you tried Restoring and now your not getting past boot. but yeah you cleared your system and data, so its going to hang on the N screen till you get something installed.
Let me try restoring 1.1 not 1.0.1 since mine came with 1.1
It looks like you and I are in a similar boat. If you successfully restore to 1.1 would you please post your steps for me?
I gotta try to find 1.1 restorable out there. I can't find it so far.
I haven't wiped the /boot ever. I've only formated the /system /data and /cache and also ran the . I'm wondering if my mounts are messed up?
Also, I did select "Wipe data/factory reset". Is that the prob?
I just successfully installed CM7. Maybe give that a try.
The wipe data/factory reset is the same as wiping data and cache. I'm thinking it has more to du with wiping system and then not flashing a rom properly.
But it should still boot to the SD I would think. Maybe we should try rebuilding /boot? Not that I know how to do that.
Which method did you install cm7 with?
touching /boot is the last thing I would do...
http://forum.xda-developers.com/showpost.php?p=11535969&postcount=151
Thanks! I'll give that a shot in the morning glad you're up and running!
Several users have complained that they get blank screens and cannot flash new roms to their Nook Color. And sometimes they end up in a recovery bootloop where it will do nothing but boot to recovery no matter what they choose in the boot menu. Sometimes this is due to corrupted partitions on internal memory.
DizzyDen has prepared some .img files that can be burned to emmc to repair some of these issues, and they work well. But some of the files are very large and it takes a little knowledge of adb commands on the part of the users. And some users cannot get adb working on their machines. So I started investigating other solutions, and I have made some tools that work that I hope are user friendly.
Dean Gibson has a thread that describes how to repartition emmc to set the partition sizes for data and media to the user's preference. He repartitions partitions p6 (data), p7 (cache) and p8 (media). In studying his zip, I figured out how to make his tool repair partitions p4 (extended), p5 (system), p6 (data), p7 (cache), and p8 (media). And I was able to add additional commands to also repair partition p1 (boot). I asked Dean's permission to post his tools as modified by me and he agreed. Thanks Dean!
So that takes care of partitions 1, 4, 5, 6, 7, and 8.
Partitions 2 and 3 are very special and one must be very careful with them. Partition 2 is 'rom', which holds information that is specific to the user's device (serial number, etc.), and it is used by the system to set flags for deciding whether to boot to recovery or not and set the boot count that is used to decide whether to do a reset to factory conditions (8 failed boots). Partition 3 is 'factory' and holds the factory.zip file used by the 8 failed boot reset (if you want to learn more about the 8 failed boot reset, go to my tips thread linked in my signature). It also holds a backup of the device information in partition 2. So it is possible to repair partition 2 if partition 3 is still intact.
A few users have somehow managed to flash Nook Tablet ROMs to their Nook Colors and really messed up partition 4. (Edit: and now I know how it happened, some idiot recommended that they remove the first line of the updater script. NEVER do that! That line is a safety check to make sure you are flashing to the right device. You can also defeat the safety check by using an old CWM that has the toggle, 'disable asserts'. Never do that either.) And since partition 4 is the extended partition that holds partitions 5, 6, 7, and 8, they get messed up too. To repair those partitions along with partition 1, use CWM recovery to flash the two zips attached below. Be warned that everything in emmc media (p8) will be wiped out, so you may want to back that up first if you still can. The first zip to flash is 'NookColor-emmc-repair-partitions-1-4-5-6-7-8.zip'. It will recreate those partitions on emmc. As soon as you have sucessfully flashed that zip, you must reboot the Nook Color back to CWM so that the updated partition table is read by CWM. Then you need to flash 'NookColor-emmc-format-partitions-5-6-7-8.zip' (partitions 1 and 4 do not need formatting). It will format the newly created partitions to the correct structure. Now you can use CWM to restore an earlier nandroid backup or flash your favorite ROM (including stock, get version 1.4.3 that I have modified to be flashable with CWM here, or DizzyDen has posted some excellent 1.4.1 stock ROMs here). If you are going to flash a stock ROM, you must be sure to use the format zip or the stock ROM will not boot properly.
If you are in a recovery bootloop, the first thing I recommend trying is to use my CWM version 5.5.0.4 bootable SD that is discussed in my tips thread linked in my signature and has been modified to help get out of some kinds of recovery flag bootloops. If you are in a recovery bootloop that just hangs, it may get you out of it after exiting my CWM with the 'reboot' command in the menu. But if you are still in the loop after doing that, it may be because your device info is missing or corrupted in partition 2. It will not boot to a ROM without this info. (Specifically, it needs a file in /rom/devconf named DeviceID. It is a text file with your 16 digit serial number in it followed by a line feed, 17 bytes.) Try flashing with CWM my 'NookColor-emmc-repair-partition-2.zip' attached to this post to recreate that info. But I recommend this as a last resort, since messing with that partition is risky. That zip will recreate the partition, reset the flags and copy your device specific information from partition 3. But your partition 3 must be intact for this to work. If it is not, the zip will abort and do nothing.
Additionally, for those that do not want to use CWM, I have made a bootable SD that has an older version of TWRP here. Newer versions of TWRP will return an error message when trying to flash these zips. It also has been modified to get you out of some kinds of bootloops.
Two points of information. First, I have included a temporary copy of CWM 5.5.0.4 on the boot partition of my repair so that if tries to reboot to emmc before you put a ROM on it, it goes to CWM. It will be removed as soon as you restore a backup or flash a ROM. Second, the new partition scheme created with my zip is for the original Nook Color's 1GB data and 5GB media. If you want one of the other schemes (5GB data/1GB media or 2GB data/4GB media) go to Dean Gibson's thread and flash his zips after you have repaired your system with mine. See his thread here.
I'm adding a little extra information about emmc partition structure for those interested. With any MBR disk there can be a maximum of four primary partitions. So to have more than four partitions the last primary partition is created as an extended partition so multiple logical partitions can be made inside it. The emmc structure is: p1 (boot, fat, primary), p2 (rom, fat, primary), p3 (factory, ext3, primary), p4 (extended, going from end of p3 to end of the disk), p5 (system, ext2, logical, inside the extended), p6 (data, ext3, logical, inside the extended), p7 (cache, ext3, logical, inside the extended) and p8 (media, fat, logical, inside the extended).
You save my nook color
Thank you so much. My serial number and other information were recovered successfully. Without those information I could not boot into any rom. If you cannot boot into ROM after following the first 2 steps, try recover partition 2. It works for me.
:laugh::laugh::laugh::laugh::laugh:
Thanks
My nook has been stuck in a "will not boot" state for about a week. I could run CWM and cyanoboot, but when ever I tried to boot CM I would get stuck at the "loading..." screen. I tried loading both CM7 & CM9 but neither one would boot.
I ran both repair scripts, reloaded CM7.1 and success!
Thanks Leapinlar! :good:
THANK YOU!!!!!!
Right from my 1st install I couldn't get the bar at the bottom of the screen, which made using the Kindle app more than a little difficult. This finally cleared everything off so I could start with a clean slate, and BINGO! I know have the bottom bar on all the screens. I assume when I go in to the Kindle app it will be ok now also (I just have to format a 16gb microSD and put in the Nook Color 1st).
I can't thank you enough!!!!
Ugh! Tried this method too, and I still cannot get the nook to boot into CWR or CWM. I tried the 8 boots thing too, but I don't know if I ever did it right because I have cyanogen mod installed on emmc. Not sure how to repair the partition if I cannot even boot into anything that allows me to flash the zip to the chip. I thought it may be the sd, but the sd cards work on my other nook. I have now basically dissembled my nook color trying to find any other solution I wish I knew what happened in the first place.
czarofthefrozentundra said:
Ugh! Tried this method too, and I still cannot get the nook to boot into CWR or CWM. I tried the 8 boots thing too, but I don't know if I ever did it right because I have cyanogen mod installed on emmc. Not sure how to repair the partition if I cannot even boot into anything that allows me to flash the zip to the chip. I thought it may be the sd, but the sd cards work on my other nook. I have now basically dissembled my nook color trying to find any other solution I wish I knew what happened in the first place.
Click to expand...
Click to collapse
Did you try my version of the CWM bootable SD card? It is on my tips thread and has been modified to boot in certain types of recovery bootloops. Unless you get CWM running you cannot flash things to internal memory. And depending on where in the boot process it hangs, you may not be able to get adb working to put things there either. And the 8 failed boots will not work unless you have stock recovery still on emmc.
Sent from my NookColor using Tapatalk
leapinlar said:
Did you try my version of the CWM bootable SD card? It is on my tips thread and has been modified to boot in certain types of recovery bootloops. Unless you get CWM running you cannot flash things to internal memory. And depending on where in the boot process it hangs, you may not be able to get adb working to put things there either. And the 8 failed boots will not work unless you have stock recovery still on emmc.
Sent from my NookColor using Tapatalk
Click to expand...
Click to collapse
Yup. Tried the card. I believe I replaced the emmc with cyanogenmod back in the day. Starts, goes to loading, turns black, then done. Cannot do anything after that. Bummer, sounds like it is actually toast.
czarofthefrozentundra said:
Yup. Tried the card. I believe I replaced the emmc with cyanogenmod back in the day. Starts, goes to loading, turns black, then done. Cannot do anything after that. Bummer, sounds like it is actually toast.
Click to expand...
Click to collapse
If you can get adb working while it is sitting there black, you can push the stock recovery files to partition one. Then you may be able to do the 8 failed boots. You can extract the stock recovery files from my zip in my tips thread.
leapinlar said:
If you can get adb working while it is sitting there black, you can push the stock recovery files to partition one. Then you may be able to do the 8 failed boots. You can extract the stock recovery files from my zip in my tips thread.
Click to expand...
Click to collapse
Worth a shot. Have nothing more to lose other than time. Maybe adb will work with you card in it. It didn't work with everything else I tried.
OMG OMG thank you soooo much for this thread , you saved my reading addict self from going insane ......
You've done a great job on collecting all of these useful things, especially for those who are stuck with their Nook Color boot looping. (I was once that guy) Dean helped me out with his data zips as well way back! Thanks for all this! :good: :victory:
Much thanks, leapinlar. Restored a nandroid with TWRP that was corrupted and lost my boot partition. I used your first 2 repair zips and I'm back in business. Your many contributions are greatly appreciated.
Mike T
OMG! Thank you so much for putting this up! Back at the beginning of the year I was having problems with my NC not going into USB Mode and only showing a black arrow when trying to load books and following this finally fixed it. Great write-up and instructions, thanks for the hard work.
I've been trying to restore my NOOK for about 2 weeks and this post has gotten me the farthest but i'm stuck at the point where my nook will start up, the "Read Forever" splash screen will come up and then it attempts to recover the system since i see an greenish Android screen come up for a second and then i get an error screen saying "Install Failed" with an image of a nook with an exclamation point in it's screen. I'm assuming i've really messed the nook up but here is where I am.
I've reformatted the partitions using your 1-4,5,6,7,8 zip
Rebooted to recovery
Formatted partiions 5,6,7,8 with your zip
Flashed your 1.4.3 stock rom
At this point I can't get any further since it appears something else is wrong and i didn't want to attempt the reformatting of partition 2 without asking if there is anything else i should try. Any help would be appreciated.
Thanks
jmiklus01 said:
I've been trying to restore my NOOK for about 2 weeks and this post has gotten me the farthest but i'm stuck at the point where my nook will start up, the "Read Forever" splash screen will come up and then it attempts to recover the system since i see an greenish Android screen come up for a second and then i get an error screen saying "Install Failed" with an image of a nook with an exclamation point in it's screen. I'm assuming i've really messed the nook up but here is where I am.
I've reformatted the partitions using your 1-4,5,6,7,8 zip
Rebooted to recovery
Formatted partiions 5,6,7,8 with your zip
Flashed your 1.4.3 stock rom
At this point I can't get any further since it appears something else is wrong and i didn't want to attempt the reformatting of partition 2 without asking if there is anything else i should try. Any help would be appreciated.
Thanks
Click to expand...
Click to collapse
Do the partition 2 repair. That is what is messed up and causing the reboot.
Sent from my Nook HD+ using Tapatalk
leapinlar said:
Do the partition 2 repair. That is what is messed up and causing the reboot.
Sent from my Nook HD+ using Tapatalk
Click to expand...
Click to collapse
I've tried the partition2 zip and received an error trying to mount the factory partition. Status 7 was the error code. Is there a way to fix this?
jmiklus01 said:
I've tried the partition2 zip and received an error trying to mount the factory partition. Status 7 was the error code. Is there a way to fix this?
Click to expand...
Click to collapse
Oh, that is really bad news. That means your partition 3 is corrupted and there is no way to retrieve your device info, like serial number, etc. PM me and maybe I can help you get it partly working, but much of the device info is lost if that partition is truly corrupted.
Sent from my BNTV600 using Tapatalk
Restore NC back to stock
View attachment 1500490
leapinlar said:
Oh, that is really bad news. That means your partition 3 is corrupted and there is no way to retrieve your device info, like serial number, etc. PM me and maybe I can help you get it partly working, but much of the device info is lost if that partition is truly corrupted.
Sent from my BNTV600 using Tapatalk
Click to expand...
Click to collapse
I've been trying to restore my daughter NC back to stock for couple months now and no success.
I did flash the P 1-4-5-6-7-8.zip and got this message after reboot:
"CWM-based Recovery v5.5.0.4
E: Can't mount /cache/recovery/command
E: Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E: Can't mount /cache/recovery/last_log
E: Can't open /cache/recovery/last_log
during the reboot, there is a menu option to hit "n" for reboot mode option. when i hit "n" it gives me (attachment).
but it won't let me move up or down to select except for the 1st option
Help would be very appreciated
big64dave said:
View attachment 1500490
I've been trying to restore my daughter NC back to stock for couple months now and no success.
I did flash the P 1-4-5-6-7-8.zip and got this message after reboot:
"CWM-based Recovery v5.5.0.4
E: Can't mount /cache/recovery/command
E: Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E: Can't mount /cache/recovery/last_log
E: Can't open /cache/recovery/last_log
during the reboot, there is a menu option to hit "n" for reboot mode option. when i hit "n" it gives me (attachment).
but it won't let me move up or down to select except for the 1st option
Help would be very appreciated
Click to expand...
Click to collapse
During reboot it should automatically go to CWM because everything else is wiped. The boot menu only lets you make the first choice because that is all that is there, everything else is wiped. You need to continue to use the CWM to flash the format zip next. Then you can flash a ROM. If the CWM that pops up is not working, use the bootable CWM SD.
leapinlar said:
During reboot it should automatically go to CWM because everything else is wiped. The boot menu only lets you make the first choice because that is all that is there, everything else is wiped. You need to continue to use the CWM to flash the format zip next. Then you can flash a ROM. If the CWM that pops up is not working, use the bootable CWM SD.
Click to expand...
Click to collapse
Thx for replied, the Nook just stock on loading and it won't let me do anything except for power up and down
I'm using a CM9 rom on my nook color and I wanted to go back to stock, so I created a cwr sd card. I can boot into recovery, so I format data/system/cache/dalvik and load nookcolor_1_4_1_update-signed.zip, then reboot the nook, it booted up to the Nook Color screen, then would do some weird boot loop is what I'm thinking I was getting. So I tried again, format everything, install the image .After rebooting it looks like its going to work, but then it hangs at the gray n screen. So I used a new sd card and a different cwr image and redid everything, same problem. So I went back to CM9 and it works fine, but why can't I go back to stock? I've read tutorials all over this place and even a few different ones from other websites. I'm following the instructions exactly.
jimmylee7706 said:
I'm using a CM9 rom on my nook color and I wanted to go back to stock, so I created a cwr sd card. I can boot into recovery, so I format data/system/cache/dalvik and load nookcolor_1_4_1_update-signed.zip, then reboot the nook, it booted up to the Nook Color screen, then would do some weird boot loop is what I'm thinking I was getting. So I tried again, format everything, install the image .After rebooting it looks like its going to work, but then it hangs at the gray n screen. So I used a new sd card and a different cwr image and redid everything, same problem. So I went back to CM9 and it works fine, but why can't I go back to stock? I've read tutorials all over this place and even a few different ones from other websites. I'm following the instructions exactly.
Click to expand...
Click to collapse
I had the same exact problem when I was experimenting that process for my tips thread. For some reason, CWM is not clearing the partitions with the wipe commands like it should. The only way I could get it to work properly was to use my partition format zip to format them. You can get that zip at my tips thread linked in my signature. That zip version (5-6-7) formats /system, /data and /cache. That thread also has a link to my 1.4.3 stock zip.
thanks!
leapinlar said:
I had the same exact problem when I was experimenting that process for my tips thread. For some reason, CWM is not clearing the partitions with the wipe commands like it should. The only way I could get it to work properly was to use my partition format zip to format them. You can get that zip at my tips thread linked in my signature. That zip version (5-6-7) formats /system, /data and /cache. That thread also has a link to my 1.4.3 stock zip.
Click to expand...
Click to collapse
That did that trick ! Thanks so much. I just ran the 5-6-7 zip, and then installed 1.4.1, and was back to stock, updating now.