Dear All
I have a problem with my milestone and i tried to search all over the forums & internet to find a fix but couldn't. The Froyo was released in our area (EMEA) on the Motorola website but not OTA , i have downloaded the file but whenever i try to update , the progress goes to 16% then it gives an error updating the device , and i Have the following shown on the milestone (Critical Error , BC655 , EDDC) then it restarts and operates normally on the same old version.
Could it be SD card problem? as i'm facing great problems having the device recognize the SD card. I have formatted the SD Card since i bought it and didn't take a backup , didn't know it might have important files on it and couldn't find the original contents on the web . I contacted the local service center and what they could only provide was the Motonav files and nothing more.and still the update is failing.I'm runnig Win 7 64 bit , tried to do it on a 32 bit win 7 machine and same error occurred again.
is this related to the lack of the required original files on the SD? (update.zip...etc)?if yes , anybody can tell me where can i get these? if not , what could be the problem? anybody faced this before? i am afraid to root it and try to install any update and end with a bricked phone because of this.
Phone Details:
FW Version: 2.1 update1
FW Config Ver:GAS_EMEA_USASHLS00RTARAB_P011
Kernel Ver: 2.6.29-omap1
Build No:SHOLS_U2_02.27.B
Sorry for the lengthy post , but i have been searching for days with no outcome at all .
Thank you
Related
Hi All
I actually saw that some other folks had a similar experience, but I can't seem to find any fix for my current state.
I had originally had the stock 2.1 on my SGS and then upgraded via KIES to froyo, the same day it came out.
FF to Saturday, a week and a half ago, I got a notif in KIES that a new upgrade is available.
Stupidly, I forgot I had OCLF and allowed the upgrade.
My phone got semi-bricked after the upgrade.
I put my SGS in the shop, and the tech at the shop flashed XXJM4 on my SGS with a flashing cable
I got it back, today, but it is behaving really badly:
1. downloads from the market fail immediately
2. external SD card is invisible in file browser
When going into "recovery", I see some error messages:
"E:Can't mount /dev/block/stl11"
"Invalid argument"
...
"copy_multi_carrier from: XSP"
"multicsc : can not access to /system/csc/XSP/system/"
...
Any ideas?
Please help
exorons said:
Hi All
I actually saw that some other folks had a similar experience, but I can't seem to find any fix for my current state.
I had originally had the stock 2.1 on my SGS and then upgraded via KIES to froyo, the same day it came out.
FF to Saturday, a week and a half ago, I got a notif in KIES that a new upgrade is available.
Stupidly, I forgot I had OCLF and allowed the upgrade.
My phone got semi-bricked after the upgrade.
I put my SGS in the shop, and the tech at the shop flashed XXJM4 on my SGS with a flashing cable
I got it back, today, but it is behaving really badly:
1. downloads from the market fail immediately
2. external SD card is invisible in file browser
When going into "recovery", I see some error messages:
"E:Can't mount /dev/block/stl11"
"Invalid argument"
...
"copy_multi_carrier from: XSP"
"multicsc : can not access to /system/csc/XSP/system/"
...
Any ideas
Please help
Click to expand...
Click to collapse
1. Try downloading files from the internet, if that works it might be your market app having some issues. You can fix this by reinstalling the market app or by updating the market app.
2. Try mount and unmount the memory card using the setting menu and let the media scanner run. If that doesn’t work back up your files in your sd card and reformat it.
Hope this helps
Hi , i write from italy. I have a N1 and i am trying to install this Rom.
Updated to radio 5-12.00.08 and HBoot 0.35.0017
Format the MicroSd SanDisk 16 Gb class4 with 128 Mb swap , ext4 2048 .
Use Sdformatter and parted magic 6.1
With previous versions (1.5 , 2.1 and 2.2 ) i had no problem.
Now , with 2.3 , after flash Rom N1 remains blocked with X colored and padlock.
In an italian forum showed the kernel evil as a novelty compared to previous versions.
I have installed the kernel evil indicated in 3D ( vers. 2.2 ) With RcAds vers. 2.2 Functioning and , to rebott N1 blocked.
I downloaded from this 3D the kernel evil 35-9 -11-2 -720p-ir-svs and patch of the camera..
I have installed rom , kernel and patches, and at the end done reboot..
N1, after the boot , always stuck to X colored.
Fullwipe , after formatting , is indispensable?
Mistaken some transition or may be my N1 to have problems?
Rcadc 2.1 2.2 & -Cyano 7.0 .x 7.1 are working properly.
Help me please.
Sorry for the bad english.
Did you follow the script?
No swap required, and 2GB ext4 can be unstable, 1GB is more than enough.
And try first with standard kernel.
Hi ,I have followed the script step by step.
I have carried out several times the total wipe , but the final result is always the same: N1 blocked.
I tried also adb logcat during boot , but does not pass anything.
Reinstalling the Vers.2.2 everything works , also adb logcat.
These tests were made with a new Sd 4 Gb.
Therefore it is not a problem of the Sd and N1 , seems to be the Vers.2.3 not part on my N1.
I don't know tests do.
Thank you for the answer
same problam
I have the same problam, Rcads 2.2 working fine but 2.3 just stucks on the google X on stratup...
I've read it takes a long time to boot and i did try to wait for about an hour...
Did you wipe System before wiping data/caches
I run all the wipe repeatedly , from the first to the last.
The first thing i run the formatting and partition, then wipe and then flash the rom.
Bye
I did the same, wiping everything and I even tried to flash 2.2 which is working fine and then flashing 2.3 bt with no luck either.
anybody got an idea why it is stuck on the google X on stratup?
I have also tried to connect N1 to the pc ,via usb , with adb logcat. With the Vers.2.2 seen pass all the steps in the boot and loading HTC , while with the Vers.2.3 remains - Waiting device -.
It seems that with the new version does not start nothing.
same
i did the same, open logcat when rcads 2.2 running and everything's working great.
when i opened logcat while 2.3 tryed to run, i only get, Waiting for device aswell.
anybody know's the reason?
did any one got success in installing the latest version on N1
pls let us know so that the one who wants to install gets some courage to install it
pls guide me
thanks in adv..........
hi everybody
i have a LG SU660 Optimus 2x that ahd a lock pattern that i fix it and then i rooted the cell phone then installed CWM 5.0.2.7 . i installed a custom rom on the cellphone without take a backup .after installing i have many problems like :
Bluetooth dosn't work correctly
SD Card dosn't work
Internall SD dosn't work
and when the cell phone comes up there are many popup problems and errors that i can't use cell phone . i tried many custom roms like : miui , cm7 , etc but problems are yet.
now i wanted to flash cell phone with official rom but i don't know excactly work with it , i have application like KDZ_FW_UPD ,Smatflasher,LG pc Site Update , etc . olso i downloaded 2 official rom , one with . kdz format and another with 2 file with LGSU660AT-00-V10i-450-05-JAN-25-2011+1 ( LGSU660AT-00-V10i-450-05-JAN-25-2011+1.bin and LGSU660AT-00-V10i-450-05-JAN-25-2011+1.fls files ) .
would u please guide me how i can flash official rom with whick flasher and how.
Thank you.
What custom ROM did you flash? and which baseband do you have?
now i installed MODACO Roms , i don't know what the baseband is , beacause there are many errors when the cell phone comes up like :
Process system is not responding.
or
the process android.process.acore has stopped unexpectedly.please try again.
or
the application calender storage(process com,android.providers.calender) has stopped unexpectedly.please try again.
these errors are in each custom rom and they get me angry , i don't know what the problem is , also the cell phone don't recognize SD Card and Internal SD Card.
please guide me to fix this problem
thank you so much
i'm waiting you , , ,
You shouldn't really try flashing custom ROMs until you know what you're doing and you're ready to take risk of even bricking your device for ever.
I can't post links yet but I'd suggest you to search google about how to flash stock ROM using Smartflash. Try youtube tutorial along with step-by-step guide. There's a very nice tutorial video by iPhoneIac. Google video search "smartflash optimus 2x"
Try custom ROM only after you learn how to flash correctly.
if you keep getting problems, you'd have to tell exactly the problems. If you can get stock installed alright, try remote call app, the folks over at LG can (or will try to) mend your cell
I have tried to install a custom rom Samsung S7. It installed successfully without any errors but when I rebooted my cell, it gave me an error that "Sim is offline. Please Contact Your Service Provider Or NokiaCare"
I have reinstalled the older version of android from backup files but the error persists.
I have tried to install the original firmware through Nokia Care Suite but the issue is not resolved.
Please help me. If there is any solution exists for this issue?
I have checked here and on the internet as well. Some say it is hardware issue while the others say it is Software issue. Please can anybody here help me out.
Appreciated
Salmankhan3191 said:
I have tried to install a custom rom Samsung S7. It installed successfully without any errors but when I rebooted my cell, it gave me an error that "Sim is offline. Please Contact Your Service Provider Or NokiaCare"
I have reinstalled the older version of android from backup files but the error persists.
I have tried to install the original firmware through Nokia Care Suite but the issue is not resolved.
Please help me. If there is any solution exists for this issue?
I have checked here and on the internet as well. Some say it is hardware issue while the others say it is Software issue. Please can anybody here help me out.
Appreciated
Click to expand...
Click to collapse
If you install other device ROM then your imei delete
Now ril never start
Put your device in dustbin
Only 1 way start ril
You need atf box or miracle box
I have miracle box.please make a video or give a full description to fix imei and start ril.
Hey guys,
dunno if I have to write english or german here, feel welcomed to answer in your prefered languages. The more opinions, the better!
I used rooted XXJVT (DBT) for a very long time but by time it went laggy AF.
Now I decided not only to reset the phone to make it work lagfree again but also flash Android KitKat via CWM.
The biggest problem I encountered: my eMMC died a few years ago, so I was forced to run the phone via microSD (had to scratch the chip off the mainboard to make it accept the microSD when flashing) and exchange the vold.fstab to make the phone use the microSD as internal storage. That way, it worked again. Until now.
Since the WhatsApp Services don't let any 2.3.7 and older OS verify their Account anymore (but those who were already verified can keep WhatsApp until Feb 2020) + I can't flash Custom Roms via CWM ("Waiting for SD-Card to mount" counting down from 20 to 0, then restart and same screen again, looped) probably because of the dead (no more existent) eMMC Chip, i guess the only way to make my phone work WITH WhatsApp again would be find a rom above 2.3.7 that I can flash via Odin..
Otherwise I guess I can shred my phone because it is restricted to SMS/Calls from now Q_Q
Now I need your help: Is there any possibility that I don't know yet? Any ROM out there that I could flash via Odin, dodging the "flash via CWM" way that doesn't seem to work for me (atleast, since my eMMC is dead, I don't know how could make it go past this "Waiting for SD-Card to mount" ****?
Greetings,
A desperate Android User^^