Related
trying to root 2.1 sprint hero, had the patched .6 version but redownloaded the .5 version on my phone, now says 2.27.651.5! Good right? Then I'm trying the regaw method for rooting. Downloaded the sdk, downloaded HTC Sync 2.0.33, downloaded hero-root. Renamed them to C:\android-sdk-windows\tools, went to the command prompt and typed it in. Then I type in adb devices and I get an error: adb not recognized as an internal or external command, operable program or batch file. I've checked debugging, and still get same error. Deleted files and redownloaded everything again and STILL get same error. Any help would be much appreciated
make sure you cd to that directory, or you can click-n-drag adb.exe (adb-windows.exe in some cases) into your CMD promt and type your command after... Little work around for odd computer setups
EDIT - you could also try to append the ".exe" at the end, i.e. >adb.exe devices
Thanks, I gave it a try! Still nothing,
Did you run the setup or did you just download, extract, and then run straight to CMD? try running the setup, don't download anything if you don't want to, and then try again.
I must be an idiot, the folder size is 54.2 mb. I'm at a loss. I will continue trying!!!!
Ok, total noob here! I've been at this for a while now and still can not get adb devices to recognize my phone. Device manager says everything working properly, drivers installed properly. I have searched and searched for an answer and still I can"t find one. Is there something I am doing wrong or have I not set up. All I want to do is root my phone, any answers would be a godsend.
I wanted to take screenshots of my Nexus One (2.2 FRF91/T-Mobile/Stock) but I'm just a newbie so I followed the guide on andriodcentral Anrdroid 101 tips. (Sorry I can't link to it since I'm a new user on these forums
That guide led me to another guide on how to install the sdk
When I tried to pull my 3rd party apps, cmd didnt do anything it simply said "0 pulled, 0 skipped", however I was able to pull my standard apps. I'm confident the sdk was installed correctly though.
I'm using a laptop with Windows 7 64bit and an AMD processor, I'm not sure if that information is helpful or not
I've already downloaded and installed the android 2.2 sdk, java runtime environment, java development kit. I've also properly installed the ADB drivers for the Nexus One. I also downloaded Eclispe but when I tried to run it, the application won't open. I have a feeling its because I didn't install it properly.
My problem now is that the ddms.bat (Dalvik Debug Monitor) won't open when I double click on it. I tried to right click and run as administrator but that didn't work either. In both cases when I try to open it, a cmd windows opens for a fraction of a second and then closes before I can read it. So I googled it and found a website that seemed to be able to solve the problem but its geared towards linux users.
I specifically followed these directions "To fix this a replace of the bundled swt is needed. The file is located under android-sdk-linux_x86-1.5_r3/tools/lib/. Rename swt.jar to swt_32b.jar. Next download swt for your platform. I have used swt-3.4.2-gtk-linux-x86_64.zip. Unpack the file swt.jar in the zipfile to android-sdk-linux_x86-1.5_r3/tools/lib/ and finally start ddms" but that didnt work either. So now my android-sdk-windows/tools/lib/x86_64 is full of other files rather than just having that swt.jar file.
Can anyone please help on getting ddms.bat to open or on how to get eclipse to open?, I'm so close to being able to take screenshots.
Some notes:
1.I'm not interested in rooting (too worried about bricking my phone), so please don't recommend that I root first.
2. USB debugging was ON when I tried it
TaeKwonDonkey said:
1.I'm not interested in rooting (too worried about bricking my phone), so please don't recommend that I root first.
Click to expand...
Click to collapse
Do you have the right drivers installed?
When your phone is on, plugged in, SD not mounted, and USB turned on, you should see "Android Phone" and "Android Composite ADB Interface" underneath that.
If you don't want to root (it's so easy and painless if you can follow instructions) then I don't know what to tell you other than:
1. Install "USB Deview" and remove all HTC/Google/Android related drivers.
2. Completely uninstall and wipe out the SDK stuff.
3. Rebooted, and reinstall Android SDK, and make sure that Windows7 installs the right drivers.
Installing the SDK is no more difficult than installing any other piece of software. If you've got Java installed, and you've plugged your phone in, and debugging is turned on, what *should* happen when you double-click ddms.bat is, the command prompt window opens, but then the Debug utility should open.
I had the screenshots stuff working before I ever rooted.
I followed the steps here: http://www.knowyourcell.com/google/...take_screenshots_on_the_google_nexus_one.html
Rooting is easy and painless. If you root, you don't have to flash a custom ROM or anything, but then you can install an app that you simply open, enable, then whenever you're doing something that you want to take a screenshot of, you shake the phone, and there it is.
Obviously this guide owes a huge bunch of thanks to "TheManii", "Giveen" and other folks who can't be named on this forum. I have tested this on both a Streak 7 WiFi and a Streak 7 4G. In both cases they had the Stock Honeycomb already on them. So if you are coming from some other version of Android you may wish to reconsider
1) Download the Fastboot+ADB.zip file for Clockwork Mod 5.0.2.7 from the XDA Developers thread (http://forum.xda-developers.com/showthread.php?t=1334487)
2) Download the Clockwork mod 5.0.2.7 file from the XDA Developers thread (http://forum.xda-developers.com/showthread.php?t=1334487)
3) Go into Settings->Applications and turn on "Run Applications from Unknown Sources"
4) Go to Development Settings and select "USB Debugging"
5) Unpack the Fastboot+ADB file into a directory on your computer where you can find it again
6) Attach the Streak to your PC, and copy the "Drivers.zip" file from the root directory of the Streak (/sdcard) to the same directory where you unpacked the Fastboot file
7) Turn off your Streak after you have copied this file, and disconnect it from the PC
8) Unpack the drivers.zip file and find the "Setup.MSI" file. Execute this file to install the drivers you will need
9) Put your Streak into Fastboot mode - i.e. turn it off, then turn it on by pressing the Power button while holding the Vol DOWN (-) at the same time. This can take up to 20 seconds
10) You will get some red text followed by a white line saying something about Fastboot USB downloading is active
11) Connect the streak to the PC now, and it should install an Android ADB driver. Depending on what you have already setup you may get some drivers installed successfully, and some not. In general if you've been following this guide, you'll be ok
12) Open a command line for the folder where you have fastboot and your recovery image (ClockWorkMod) - in windows navigate to the folder, and hold the shift key while right clicking
13) On the command line type the following:
fastboot -i 0x413C flash recovery recovery.img (where recovery.img is the ClockworkMod or other recovery file)
14) On the command line type the following:
fastboot -i 0x413C reboot
15) Your device should now reboot
16) To get it to reboot into CWM, turn the Streak off, and then turn it on again while holding the Power Button and Volume UP (+) at the same time. This may take up to 30 seconds
From here you would follow the normal CWM options to install just the root files (Superuser7 for one example) or install a custom ROM.
It turns out steps 9 - 15 are also a great way to fix the problem when your Streak comes up and starts asking for a Password when you never setup a password. For some reason installing one of the custom ROMS also installs a version of CWM that is not as recent as the 5 series, which can lead to issues with the signature verification (i.e. when things go "boom", Android sees the partition as encrypted rather than just "locked"). So steps 9 - 15 allow you to put in a later CWM which does a proper wipe, and you're back in business. Have to reinstall apps, but the data is left alone.
Just in case I'm not the only one who has run into this
Ok, I used this guide to modify my Dell Streak 7 wifi. After I was done my screen kept flickering and I put it back to stock thanks to AndroidOVERALL putting together a post on how to complete the restore.
I have searched about the screen flickering but didn't find a resolution. Maybe I missed it, but it seemed that others had the same issue and it was either a hardware problem, the brightness was adjusted, or auto rotate was disabled. I tried adjusting the brightness settings and many other settings but the issue was not resolved until I returned everything to stock.
I have a Dell streak 7 wifi, US version with Honeycomb.
Please point me in the right direction if this issue has been resolved and I missed it. If not any suggestions?
Did you load a custom ROM after following these steps, or did you just reboot aft getting CWM installed. Usually the flickering comes from an issue with the video driver (so can be software if a bad driver, or hardware if it's only marginally in spec).
For any one who gets to the end of the steps and now can boot in go CWM but doesn't know what to do about getting rooted.
Very very Simple.
Download Superuser7.zip
http://www.tablet-cables.com/streak/tools/root/Superuser7.zip
Have your Streak booted normally and USB cable hooked up.
Move to the internal Memory Superuser7.zip
power off device
Power back on using Vol UP & Power Button
Select 2. Software upgrade via update.pkg on SD card and press power
CWM will load.
Select install zip from sd card and power to enter.
select Choose zip from internal sd card and power.
use Vol UP to go backwards to your files and select Superuser7.zip and hit power
move down to YES - Install Superuser7.zip and hit power
thats it. its rooted.
goto ++++++++ Go Back+++++++
and reboot system now
and let it reboot.
Not necessary, but I'd suggest running Superuser and hitting the Knob icon top right (settings) and scrolling down and updating Super User.
Hope this helps someone who may not know where to get Superuser7 and what to do after following the great guide above.
thanks!
nothing sucks worse than a bad download -- happend TWICE! (dayum!)
got rewt?
Help?
I am trying to Flash superuser.zip after installing the clockwork.
But I keep getting the following screen. I do not have exterior sd card installed.
What can I do?
blastedmax said:
I am trying to Flash superuser.zip after installing the clockwork.
But I keep getting the following screen. I do not have exterior sd card installed.
What can I do?
Click to expand...
Click to collapse
It's saying that it is looking for an SD Card and not finding it, so that certainly makes sense. However, it sounds like it is looking for "update.pkg" rather than "superuser.zip", so is it possible you accidentally selected the "Update" option in CWM rather than the option to select a file?
He doesnt have clockwork mod installed, you must have CWM installed to flash zips
OK, I have a new Streak 7 t-mobile with HC 3.2. I plug it to the pc running xp sp3, and it needs drivers for MTP and Streak7. I pointed to the Fastboot+ADB folder I extracted for the Streak7 driver and it installed Android ADB Interface. Pointing there for MTP fails to find a driver. I can't get to the internal SD to get the drivers.zip because my computer won't recognize the Streak until the MTP driver is installed. After installing an MTP driver from the net, I can see the internal and external SD. I copied everything to a single folder labelled STREAK in c:\ and unplug the Streak from the pc. I put the Streak into fastboot mode (Volume - & Power), wait about 10 seconds, then plug it into the usb port. The computer see the Fastboot device and needs a driver. I point it to the STREAK folder (former Fastboot+ADB) but it didn't find a driver it liked. I tried to install manually, but there is no Android 1.0 or Android ABD Interface devices in my list. I do see Android USB Devices, but it is empty when I click on it. ANYBODY else get this, and how do I move forward? I followed the guide to the letter, and appreciate all the work & effort you guys put into making these root methods available. The Streak7 is a cool little device, but I think it will be cooler once I root it. I have rooted my Epic 4g and the wife's Evo 4g on this same computer, and I do have the Android SDK installed (even though I don't know how to use it).
OK, so I used all the same files I have here and was able to successfully get Clockwork flashed & gain root. I dunno why the xp machines don't like these files. I tried 3 other xp laptops before getting to my wife's Windows 7 laptop, which worked just as described in the very well-written guides. #MindBottling!
I cannot even find the drivers.zip in step6. WIN7x64 and a brand new tmobile streak 7. where is this thing? I looked through all the folders and subfolders.
Drivers.zip is in the main directory of the Streak. Open up ES File Manager or a similar program and you should see it. To get it to your PC, attach the Streak via USB and let it mount as external storage (default behavior I believe).
In my main directory on on my streak, using ES file explorer, i cant seem to find that file. I see acct, cache, config, d, ....etc folders, i scroll down, i see default.prop, init, init_recovery.rc, ...... var files, but i dont see drivers.zip. help I need to get honeycomb so I can use skype front facing camera, cause I understand froyo 2.2 can only use the back camera w skype.
Since this should be a common file for all SD7 units, can someone please email that file to me so i can get past step 6. [email protected]
cidand1 said:
In my main directory on on my streak, using ES file explorer, i cant seem to find that file. I see acct, cache, config, d, ....etc folders, i scroll down, i see default.prop, init, init_recovery.rc, ...... var files, but i dont see drivers.zip. help I need to get honeycomb so I can use skype front facing camera, cause I understand froyo 2.2 can only use the back camera w skype.
Click to expand...
Click to collapse
From this I gather your Streak did not ship with Honeycomb. That would explain why you didn't find the file as that is something that I gather Dell added when they changed how they shipped it later on. I am not sure what the redistribution rules are for the file, which is why I haven't posted it myself.
That said, I also can't guarantee this process will work for someone starting with Froyo. I do know there may be an issue with which version of CWM you can use in that case. As such, you may want to check one of the other guides to be sure.
EwanG said:
From this I gather your Streak did not ship with Honeycomb. That would explain why you didn't find the file as that is something that I gather Dell added when they changed how they shipped it later on. I am not sure what the redistribution rules are for the file, which is why I haven't posted it myself.
Click to expand...
Click to collapse
Explain please? Shouldn't drivers be present no matter how it's shipped? Mine came with Froyo with drivers, I OTA'd to HC and I still have them.
Ya I bought this from dell directly about 3 weeks ago. From what I have been reading on XDA, mine is definitely different. Its a tmobile streak 7.
Android 2.2.2
Kernel : 2.6.32.9
OEM ver: GLUNB1A133633
Build : 15420
Another thing I noticed is that even trying to load CWmod through fastboot, my computer does not recognize the DS7 in fastboot mode. The drivers in the fastboot+ADB zip file dont work on my computer as fastboot drivers (or maybe I should try another CPU). My cpu is an AMD 64; running win7 pro 64; i need some serious help.
I think I bricked!
Ok I followed the directions from here to root my tablet.
http://www.cesgeekbook.com/2011/12/root-dell-streak-7-with-honeycomb-32.html
All went well! Everything worked and I was rooted! did the Superuser7. Clockwork came up and installed. All went right! So I was pleased. I figured I would later than put on a ROM cause it was late. Well was going to do so and tried to go into clockwork via ROM manager. Didn't work! Kept rebooting! So I figured I would try the pother way "Press Power and +" then click to Install from SD Card to go into Clockwork. That didn't work either! Then Now it won't reboot at all! I can get into fastboot and I can get into the bootloader. But that's it! I tried to do a Factory Reset and nothing! it just stays on the Dell boot screen. Anyway to fix the problem? If so, please give me step by step directions on how to do it.
Use of ROM Manager is generally discouraged due to unknowns about how the package will work with other ROMs. It also isn't clear to me which version of CWM you were using.
If you can get into fastboot, then you should still be able to use ADB, and I would suggest trying to reinstall CWM as indicated in the first message of this thread. That way at least you should be at a known good spot for us to try and help you get a custom ROM installed.
EwanG said:
Use of ROM Manager is generally discouraged due to unknowns about how the package will work with other ROMs. It also isn't clear to me which version of CWM you were using.
If you can get into fastboot, then you should still be able to use ADB, and I would suggest trying to reinstall CWM as indicated in the first message of this thread. That way at least you should be at a known good spot for us to try and help you get a custom ROM installed.
Click to expand...
Click to collapse
Didn't know about the Rom Manager issue. I guess it's only good to use on cell phones? Anyway, I am trying again, but the problem is my laptop is now not reading the tablet when in fastboot mode. I have followed all the step again. Including reinstalling the drivers. But since it's not reading the tablet. I can not reinstall CWM. The version I installed was the one from the 1st page. It's a fairly simple thing to do. But just need to get the device to be read by my laptop.
I have contacted Dell and explained to them the problem. They did say that I can return it to get it fixed. but still kind of hoping I can do it from home.
Marvelous0ne said:
Anyway, I am trying again, but the problem is my laptop is now not reading the tablet when in fastboot mode. I have followed all the step again. Including reinstalling the drivers.
Click to expand...
Click to collapse
Not sure what you mean when you say the laptop is not reading the tablet in fastboot mode. When in fastboot it should NOT show up as attached storage. The best way to tell if it is "really" seeing the Streak 7 is in step 13 - which uses an id rather than a device name so that it should work even if the tablet isn't fully identified. If you try to perform step 13 while in fastboot, what message are you getting?
***Root method for .621 update***
THIS IS FOR USERS WITH THE .621 UPDATE ONLY. IF YOU HAVE NOT UPDATED DO NOT USE THIS METHOD.
*****DO NOT USE WINDOWS*****DO NOT USE RSDLITE*****
Instructs are made by Skelente
1.) Download the latest Ubuntu iso for your system. Most processors these days are 64 bit, but if you're running on an older computer or do not know if you have a 32 or 64 bit processor I'd recommend doing 32 bit just to be safe (64 bit processors can run both 32 and 64 bit distributions, but 32 bit systems cannot run 64 bit distributions.) Side note: you can download other distributions, but if you do you will not be able to create the persistent drive using the USB method. It should also be noted that some older systems cannot boot from USB, most newer systems (post 2000/2001 IIRC) can boot from USB, however you should consult Google to verify for your system.
2.) Burn the iso:
2.a If you have a cd burner and blank disc, this is the easiest method but, again, you will not have a persistent drive you will just have a Live CD. Use an iso burner to burn to cd, then skip to step 3a.
2.b If you do not have a burner, a blank disc (or don't feel like wasting a DVD disc) but have a free USB drive (with at least 2 GB of memory, bit overkill but it has to be big enough to hold the iso + changes + the persistent "drive") then I recommend downloading either unetbootin or universal USB installer. Go to either web site and follow their instructions. If you use Ubuntu, you'll have the option of creating a persistent drive, which is basically a fake-partition that allows you to save files to when you reboot Linux after running this Live USB. I would recommend using a persistent size of at least 200 mb so we can save the SBF file and sbf_flash. If you created a persistent drive go to step 4. If you opted out of this, skip to step 4.
3.a So you have a Live CD now. If you have a spare flash drive, load up the 604 SBF and sbf_flash. Either way, you'll need to proceed to booting into linux, go to step 4.
3.b Once the respective application has finished, copy the SBF and sbf_flash file to the persistent drive listed in windows.
4. Now we need to boot from your Live image. Restart your computer. When your computer is booting up it should give you two options, "Enter BIOS" and "Select Boot Order" or similar. For my Lenovo Laptop, I can hit F12 to change the boot order, and from there I can select my USB port and it'll boot from there. If you do not see a boot order option, you will need to go into your bios and change the boot order manually. Again, you will need consult Google for this as the menu selections vary by system. It really isn't that hard to figure out if you go through the menus, but I strongly, strongly, strongly recommend and encourage you to google your motherboard's manual to verify what you need to change if you don't know what you are doing. You are responsible for any changes you make on your system. Your BIOS is crucial for your system to function properly. Once you have found where to change your boot order, select the respective drive (USB, or your CD/DVD drive). These will be listed by the manufacture name (so SamsungXXXX for a Samsung drive or PNYXXXX if you're using a PNY usb stick.)
5. When Ubuntu boots up, it'll give you an option to run "Live" from the CD/USB. Select this option. Installing to your hard drive could mess up your current OS install, and I'm not going to get into partitioning here. Once you've gotten into Ubuntu, select "Dash Home" in the upper left hand corner, and then type terminal in the search box. Click terminal, then open it up.
6. Now you'll need to get to where ever you have the SBF and sbf_flash stored through the terminal. If you chose to use the boot cd, and did not have an available flash drive, you will need to download the SBF from here, as well as sbf_flash and then extract them to the same folder. The default is "Downloads" and I recommend just extracting them to that directory for simplicity.
6.a If you had to download the SBF/sbf_flash, getting there through terminal is rather easy. All you'll need to do is type these commands into the terminal:
cd Downloads
chmod +x sbf_flash
./sbf_flash mb809-2.3.5.sbf
And then let the program do it's work. When it's done, go to step 7.
6.b If you already copied the required files to a USB drive, we need to get there through terminal. Type these commands:
cd /
cd /media/
ls (This command will list all the drives connected to your system, cdrom, usb, etc. If you used the Universal USB installer it will list the USB drive as "PENDRIVE", I'm not sure what the default is for Unetbootin but you should be able to figure it out and if you just used a spare device it could be completely random.)
cd drivename (obvioiusly this will vary based on the USB method, for me its "cd PENDRIVE"
If your files were just on the main drive, you don't need to do anything else but the following commands. If you put them in another folder, you will need to do "cd foldername" without the quotes obviously. When you're in the directory with both the SBF and sbf_flash you will need to do these commands (again, ignoring the '-'):
chmod +x sbf_flash
./sbf_flash mb809-2.3.5.sbf
And then let the program do it's work. When it's done, go to step 7.
7.) After sbf_flash is done, you'll need to restart your computer. Its recommended you remove your boot media (cd or usb drive) so that Windows can boot normally. If you changed the boot order in bios you will need to change it back to what it was before, otherwise whenever you have a CD/USB stick plugged in your computer will automatically try to boot from it, and get pissy if it can't boot from the media.
8.) Once you're back in windows you'll need to run the zergrushv4 root method. From there you can do whatever you want. You still cannot SBF to previous versions (602 or 605) and you cannot run Froyo roms.
Downloads:
sbf_flash
SBF File & root tools
*HELP*
If you flashed with RSD Lite and have no data here is your options...
Flash stock .621 sbf and...
Switch devices on your account to reactivate the data
or
Call verizon to have them reporvision your data...
Once you are on the milestone system you can flash a custom rom.
You must SBF in Linux using sbf_flash, otherwise .604's radio will flash over .621's and your phone will no longer be able to take or place phone calls.
Edit: It may just be data, instead of phone capabilities. But still, flashing in Linux is much easier than having to spend time with Verizon's incompetent phone operators.
Sent from my Transformer TF101 using Tapatalk
If you SBF'd using RSD Lite, you flashed the 605 baseband over the 621. I didn't think this would mess up texts/phone calls but just your data connection, but correct me if I'm wrong I'm just going from memory (I had a dx2, just been watching the threads.) This was a big problem for the people over at rootz and they had a few different tactics on how to solve it. Some were able to call VZW and ask the tech support to "re-provision their data" although that was with mixed results (it depended who ya got on the phone, some people had no luck and other people had their data start back up no problems.) You would need to sbf back to 621 and call from a separate phone, however. Another user (skreelink) theorized that it was merely the AUTH code that was being messed up, and suggested that (for those with a secondary smart phone) you just go onto VZW.com, switch out phones for your number, wait 15 minutes, then go back to the website and switch back to your DX. I'm not sure if anyone has had any success with the latter but I know the former worked for a handful of people (with others getting tech support who had no idea what they were talking about.) If you call and don't get someone knowledgeable, I'd just cross your fingers and call back another time and hope you get someone different.
link not working
anyone have updated link that works to download this?
yea i learned about the radio the hard way, but i found a quick fix... maybe...
If you flashed with windows and now cant get data if you have a old smartphone that is compatible with you plan just go online and switch devices and then switch them back. Saves from having to call verizon But some people may not have a extra
I am probably one of those people who will also need to use this alternative root method but I have a question -
I have been recently acquainted to this dilemma on my "new" Droid X. I mistakenly started downloading the .621 update on my Droid X . I quickly realized what was happening and pulled the battery before the download was complete. (data disabled on phone) . I turned off my router. I reinstalled the battery and turned off all of the data on the phone. I tried clearing the cache but get a message the triangle that it will try to download it again. I pulled the battery and do not plan on powering up the phone with any data connection until I can get some clarification on what to do . The phone has little value to me if it can't be rooted . Is there anyway to stop the train at this point and go back to .605 ( i believe that was the previous one) . - Thanks
bamx2 said:
I am probably one of those people who will also need to use this alternative root method but I have question -
I have been recently acquainted to this dilemma on my "new" Droid X. I mistakenly started the downloading the .621 update on my Droid X . I quickly realized what was happening and pulled the battery before the download was complete. (data disabled on phone) . I turned of my router. I reinstalled the battery and turned off all of the data on the phone. I tried clearing the cache but get a message the triangle that it will try to download it again. I pulled the battery and do not plan on powering up the phone with any data connection until I can get some clarification on what to do . The phone has little value to me if it can't be rooted . Is there anyway to stop the train at this point and go back to .605 ( i believe that was the previous one) . - Thanks
Click to expand...
Click to collapse
If you disabled the download you are still on .605.
Turn your phone on, quickly root it with Pete's Motorola Root Tools, install Titanium Backup and freeze the "2.3.3 Updater" application.
Afterwards, reboot your phone and you should be golden.
Sent from my DROIDX using Tapatalk
nfazzdar - Thanks for the reply . I did a factory reset and that got rid of the yellow triangle. I then rooted as you suggested and installed TiBu . I really is too bad that M and V are pullin this cr#p .
I am going to update the post and host the files. There is also some extra stuff i will put up for download.
For people who don't want to pay for Titanium Backup to have the freeze feature, use a free app called gemini app manager.
Good to know. I think that I will also install OTA Rootkeeper as well.
deboyz1014 said:
For people who don't want to pay for Titanium Backup to have the freeze feature, use a free app called gemini app manager.
Click to expand...
Click to collapse
using linux mint and have a ?
I've followed everything, I believe, but when I run the commands in linux everything runs then it says "reboot into bootloader" and just sits there. I've tried doing it in bootloader and get a message 'waiting on phone:failed Are you root? Can someone steer me in the right direction I gotta get this phone on another ROM. Thanks in advance.
BRANDENDEUCE said:
I've followed everything, I believe, but when I run the commands in linux everything runs then it says "reboot into bootloader" and just sits there. I've tried doing it in bootloader and get a message 'waiting on phone:failed Are you root? Can someone steer me in the right direction I gotta get this phone on another ROM. Thanks in advance.
Click to expand...
Click to collapse
Exactly the same problem here too.
Sent from my HTC Flyer P510e using XDA
landonotis said:
Exactly the same problem here too.
Sent from my HTC Flyer P510e using XDA
Click to expand...
Click to collapse
You need to either:
Code:
sudo su
./sbf_flash
or
Code:
sudo ./sbf_flash
Note: if using
Code:
sudo su
be sure that the terminal shows a "#" instead of a "$" after you input the command. This shows that you are root.
Sent from my DROIDX using Tapatalk
infazzdar said:
You need to either:
Code:
sudo su
./sbf_flash
or
Code:
sudo ./sbf_flash
Note: if using
Code:
sudo su
be sure that the terminal shows a "#" instead of a "$" after you input the command. This shows that you are root.
Sent from my DROIDX using Tapatalk
Click to expand...
Click to collapse
When exactly do we need to input the code? I am assuming this is in terminal on linux?
BRANDENDEUCE said:
When exactly do we need to input the code? I am assuming this is in terminal on linux?
Click to expand...
Click to collapse
Sorry for not specifying, but you assume correctly.
Sent from my Transformer TF101 using Tapatalk
What roms can we use now?
Now that we have root and su on the droid x/milestone what roms are we able to flash? I know they can't be froyo based but do they now have to be related to the milestone roms, droid x, or both? I've tried a few and it's always an abort so I'm just needing some direction here...
BRANDENDEUCE said:
Now that we have root and su on the droid x/milestone what roms are we able to flash? I know they can't be froyo based but do they now have to be related to the milestone roms, droid x, or both? I've tried a few and it's always an abort so I'm just needing some direction here...
Click to expand...
Click to collapse
I believe this thread will be of help to you. =D
http://rootzwiki.com/index.php?/topic/21337-[ROMS]-Multi-ROM-Thread---Blur-Based-ROMs-for-those-on-.621/.604!
Sent from my DROIDX using Tapatalk 2 Beta-5
This worked great.
Any cwm kernels are we able to use?
Just wondering if we can flash custom kernels since we can do roms? If so any help would be appreciated.
Hi all,
First of all I would like to say how awesome this site has been. I knew nothing about my first venture into rooting a phone so this has been a learning experience.
Right - now for those who have a HTC Incredible S and are looking to breathe some new life into this device (like I have purely for giving to my son to watch YouTube - so no calling, texting, etc) this is what I did (all information sourced from various threads on XDA and some external links as well):
1. Read through the following guide: {[GUIDE]} HTC Incredible S Unlock Bootloader, flash recovery, Root, S-OFF. Note: It appears that it is no longer possible to get S-OFF due to the Revolutionary site no longer existing. So you will have to stop at the end of Step 5.
2. Assuming you are using Windows 10 I had to do the following in order to successfully connect to the HTC Incredible S using fastboot/adb:
1. Install HTC Sync.
2. Once you have done this go to Control Panel -> Programs and Features then uninstall the HTC Sync program (the one with the sync icon) but leave the drivers etc installed.
3. Then download and install the Android SDK and update it as per the instructions https://www.andreszsogon.com/using-android-8-and-9-emulators-without-android-studio/
4. You then want to create a folder called C:\Android.
5. Now browse to the C:\Users\<username>\AppData\Local\Android\android-sdk\platform-tools folder and copy the adb.exe, AdbWinApi.dll and AdbWinUsbApi.dll files to C:\Android.
6. Now make the changes to the registry. Put this in a *.reg file (with your texteditor and rename the file to e.g. import.reg
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbflags\0BB40FF00100]
"SkipBOSDescriptorQuery"=hex:01,00,00,00
Then import that import.reg via regeditor (as admin) into your registry. Then reboot your computer.
7. Restart your PC.
8. If you are unlocking the bootloader for your HTC device - put the "fastboot.exe" file from the HTC Dev webpage (https://www.htcdev.com/bootloader/) here as well. Also put any recovery mods, roms, etc here as well.
9. Make sure - if you can that - that you boot your phone normally and go into the settings and turn USB Debugging "ON" and Fastboot "Off" (the second one is you can get to the bootloader on your phone using the appropriate key combinations). You may also want to turn on the option to install apps from unknown sources. Power off your phone.
10. Now turn on your phone into Fastboot mode then connect it to the PC it should change to Fastboot USB.
11. Open a command prompt as administrator and browse to C:\Android. You should now be able to use the Fastboot command.
Click to expand...
Click to collapse
3. You should now be able to complete steps 2 - 5 from the guide.
4. For my HTC Incredible S I went with the following:
Clockwork Mod Recovery 5.0.2.0 (download it here: http://download2.clockworkmod.com/recoveries/recovery-clockwork-5.0.2.0-vivo.img)
Root obtained using SuperUser 3.1.3 (filename is Superuser-3.1.3-arm-signed.zip from here https://forum.xda-developers.com/showthread.php?p=39959468#post39959468)
Installed Unofficial CyanogenMod 10.1 for vivo (download it here: https://forum.xda-developers.com/showthread.php?t=2127020) [EDIT: You may or may not need to also install this patch for it as well https://forum.xda-developers.com/showpost.php?p=38765296&postcount=493]
Installed Google Apps (Gapps) (download it here: https://www.teamandroid.com/gapps/ Just scroll down until you get to Gapps CyanogenMod 10.1)
Thanks all!
Hey bud, try https://web.archive.org/web/20150601030338/http://revolutionary.io/
Nonverbose said:
Hey bud, try https://web.archive.org/web/20150601030338/http://revolutionary.io/
Click to expand...
Click to collapse
Hi. Yeah, tried that.
While you can download the required zip file it doesn't let you generate the beta key required.
How about the solution posted here?
https://forum.xda-developers.com/showpost.php?p=63060287&postcount=11