Related
(I figured to post this in Android Development as it wasn't really a fit for any other forum; and made its own thread since multiple ROMs and threads use non-stock kernels.)
I ran into an issue running JAC's OC/UV kernel, as detailed at http://forum.xda-developers.com/showthread.php?t=806116 . Essentially, whenever any kind of audio was playing, whether through headphones or the speaker, local media (i.e. mp3 player) or remote (i.e., Pandora), at some point the phone would just.. die. Capacitive buttons wouldn't light up, no unlock; music would die; and basically a battery pull was required to turn the phone back on. adb logcat reports nothing - you can see the audio streaming, then the logcat shut off with the phone.
Based on the thread above (and searching the Bionix thread), it seems that a non-stock kernel does this. (There are only a couple of posts out of the thousands on Bionix's thread.) I have not tested KingKlick's kernel, only JAC's; perhaps KK doesn't suffer from this. This issue is independent of overclocking/underclocking the phone (verified by setting JAC kernel to 1000/200, then uninstalling setcpu); Voodoo lagfix (verified by disabling lagfix and running audio for about an hour); and ROM (tested using multiple versions of Franken-Twiz and Hybrid - maybe there's an inherent issue with eugene's mods, but I haven't seen any other posts.)
I suppose this thread serves as a warning/bug report for anyone that might encounter this issue if running a non-stock kernel. The best way to resolve AFAIK is to revert to a stock kernel.
Thank you for posting this! My phone had suffered from this at random times since I started using JAC's kernel. I asked about it in a couple of threads but never got a single reply. Glad to know it's not only me
I'm running the same kernal and about 20 minutes ago running pandora my phone just turned off too and had to pull the battery to restart
Sent from bionix 1.9.1 jacs oc/uv kernel
Had that issue at the Gym the other day, not even on Bionix.
I had similar issues, also with the KK Kernel, its not just JAC's kernel. You don't have to pull the battery either to get out of the freeze, you can hold the power button for several seconds and it does a hard reset.
I have found though that the KK Kernel is less likely to do it if you set your setcpu to 400 min and 1000 max before using pandora. Those settings seems to have worked for me every time..also after setting up pandora make sure to fix permissions with rom manager.
Just a little work around, try it to see if it works for you.
Sent from my SGH-T959 using XDA App
Actually this is a known problem since even the G1.
If you have anything like setCPU, which I do, and you set the idle or lowest speed lower then 400 Mhz the phone will more then likely freeze up when playing music or when going to idle.
I don't remember off the top of my head what causes it to do this when it goes below that certain Mhz, but Im sure I or someone here can dig the old thread up.
Man without this thread I could never get pandora to work with a custom kernal. I setcpu at 400 min and 1000 max and not a single freeze. Thanks so much for posting that tip, you made my day.
Sent from my SGH-T959 using XDA App
Ive had this problem to.... but it was ONLY with Jacs 1.1, I revert every ROM back to his 1.0 and have no problems. Everytime I dont, I get a phone freeze.
I was having this problem with jac's newest kernel so I went back to his first OC/UV, it is a known problem and he's working on it according to his twitter. how I got around this is I used his OC script and got rid of setcpu, from what Quadrant says I'm still running 100/1200. Hope that helps you guys
jmercil said:
I have found though that the KK Kernel is less likely to do it if you set your setcpu to 400 min and 1000 max before using pandora. Those settings seems to have worked for me every time..also after setting up pandora make sure to fix permissions with rom manager.
Click to expand...
Click to collapse
Interesting. I'll try installing JAC OC/UV/Voodoo again and see if this observation is consistent.
r6kid said:
I was having this problem with jac's newest kernel so I went back to his first OC/UV, it is a known problem and he's working on it according to his twitter. how I got around this is I used his OC script and got rid of setcpu, from what Quadrant says I'm still running 100/1200. Hope that helps you guys
Click to expand...
Click to collapse
Yeah, I think the problem only exists when you use the OC kernel with setCPU, and setup setCPU under 400Mhz, other wise the kernel with out setCPU works just fine when it goes below 400Mhz.
Once again I don't remember why it does that but it has something to do with setCPU not being able to initialize properly after the phone goes idle and falls below 400Mhz.
Would have to agree. There's a bug somewhere. Not sure if its limited to jacs though.
Currently on masters rom kk. Only problem is pandora.
i had this problem too. kinda disappointed cause the kernels make everything run so much better. so i had to go back to using stock cause i listen to music a lot :/
There's definitely some hardware variability, because I can't recreate this bug. I listen to music all day long (MixZing, Slacker, Pandora) running 1.8 w/ JAC's OC/UV Voodoo. Never seen this.
Likewise with Jacs 1.1, had a couple other weird issues running that specific kernel too, not a single problem when I flashed back to 1.0
Sent from my T959 running Bionix1.9 with Jacs OC/UV and Voodoo
i get this same thing. ive had it happen with SetCPU both installed and not. right in the middle of a good song bam phone just shuts up. walk over to my toolbox and sure enough the phone is in a state of being divided by zero and only a battery pull lets it return to the world of the living. not greally a good thing when i have sevearl iphone dorks in the shop and they pop on over to my speakers and they say out of the way lets plug in a REAL phone. makes me want to scream LOL. ****ing iphone >_<
i retort with soooo when you get it out of the box....thats it right? nothing can be changed right? oh look that program sucks....what you cant make your own? ...yea...i thought so. hey look im making a call in the scrap room surrounded by 4ft thick concrete walls.... i got full bars lol. they got nothing in the empty parking lot cuz there holding it wrong LOL
Blkegk said:
Man without this thread I could never get pandora to work with a custom kernal. I setcpu at 400 min and 1000 max and not a single freeze. Thanks so much for posting that tip, you made my day.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Glad it worked for ya!
Sent from SGSV Bionix 1.9.1 KK OC/UV with the quickness!
sxfx said:
Yeah, I think the problem only exists when you use the OC kernel with setCPU, and setup setCPU under 400Mhz, other wise the kernel with out setCPU works just fine when it goes below 400Mhz.
Once again I don't remember why it does that but it has something to do with setCPU not being able to initialize properly after the phone goes idle and falls below 400Mhz.
Click to expand...
Click to collapse
I tried that though, as you can see in the thread I linked to above. Uninstalling SetCPU didn't help..
I think it's hardware.... One of the unlucky ones....
Try with a stock kernel. Jac and kk kernels do uv by default, which is like overclocking in reverse. It has the same possible stability issues.
It always restarts automatically, when i make a call, the call just freezes and when i turn the phone on from standby to see what happen, well you guessed it, it restarts! its pretty annoying i went through 2 batteries today in 8 hours, because of the restarts. please help!
If your using the stock kernel I think its overclocked to 768 not sure though. Try one of dec's 691 kernel the #589 is my recommendation. Hope it helps good luck.
Root-Hack-Mod-Always™
jlopez512 said:
It always restarts automatically, when i make a call, the call just freezes and when i turn the phone on from standby to see what happen, well you guessed it, it restarts! its pretty annoying i went through 2 batteries today in 8 hours, because of the restarts. please help!
Click to expand...
Click to collapse
There could be a lot of things happening. The most common is that your running a clock speed higher than that which your phone can handle. Not all heros are created equal, mine for instance starts rebooting at anything higher than 691. Try a different kernel or if using setcpu or over clocking widget to lower your upper end clock speed. Your phone freezing when coming out of standby can mean your lower clock speed is too low. ASOPGB has JIT enabled by default as well. Go into the settings and turn it off, then reboot. You will just have to play until you find out what works for you. Good luck!
runngwlf said:
There could be a lot of things happening. The most common is that your running a clock speed higher than that which your phone can handle. Not all heros are created equal, mine for instance starts rebooting at anything higher than 691. Try a different kernel or if using setcpu or over clocking widget to lower your upper end clock speed. Your phone freezing when coming out of standby can mean your lower clock speed is too low. ASOPGB has JIT enabled by default as well. Go into the settings and turn it off, then reboot. You will just have to play until you find out what works for you. Good luck!
Click to expand...
Click to collapse
Set cpu or similar will not fix the issue, laie was right a capped 691 kernel is needed and probably a capped recovery as well. Btw jit is no longer default in gb, and jit would not cause reboots anyway.
sent from my hero, which no longer sucks ass
il Duce said:
Set cpu or similar will not fix the issue, laie was right a capped 691 kernel is needed and probably a capped recovery as well. Btw jit is no longer default in gb, and jit would not cause reboots anyway.
sent from my hero, which no longer sucks ass
Click to expand...
Click to collapse
Ahh thanks for the info, I had not gotten through all the new posts on the other ASOP GB threads. Good to know though. I have no tried out the rom, I plan to this weekend and my phone does NOT like kernels that clock above 691.
Ok, so here's the deal - I'm not sure how best to explain this so bare with me... basically I've been running various oc/uv kernels for a while now on my Captivate and have had minimal problems with them. I've had the occasional freeze due to too low uv settings but never anything as weird as the freeze issue I'm having now.
I d/led several kernels to play with and ended up with GB's Steam kernel via Serendipity 4.3 (which is the ROM I'm using now), moved onto Suckerpunch's Suckerpunch-SmR-#27-1280-500hz-CWM to Speedmod-Kernel-i897-k12s-cold-500hz-CWM I think, then to GB's rGB-v.4-011811-voodoo-cwm and now I'm on Suckerpunch-SmR-500mz-#32-CWM (or w/e the full name is...) The issue is that my phone is randomly freezing w/o Voltage Control/SetCPU/Galaxy Tuner running or even installed (as is normally the reason for freezing with me and oc/uv kernels). Now I had VC and GT installed but realized GT wasn't going to be much use so I uninstalled and VC was never set to keep settings at boot so I don't think that VC would be the culprit but I'm not sure...but anyways, I noticed that the freezes started the other night after I tried to add a task widget to my ADW EX launcher via SpringPad with the current screen full. When that happened, my phone lost it's mind...it caused the launcher to repeatedly FC and when you would reopen the launcher w/ the home key it would load to a point where the widgets started to load then it was like it hit what was supposed to be that SP widget but then it would realize the screen was full and would FC again. Well, I FINALLY managed to clear the launcher data, retried, no success, uninstalled SpringPad, launcher still FC'd, uninstalled launcher, no FC (as it wasn't there anymore...) but the phone would now randomly freeze up with little to no provocation. I finally broke down and flashed a different kernel to see if it would help and oddly enough it did. It was only when I flashed a non-oc/uv kernel that it would stop freezing. Now I can't see any correlation between the freaking out launcher and the kernel but who knows, right? I tested my theory by leaving the launcher and app uninstalled and reflashed a ov/uc kernel. About a minute after loading the phone would freeze. The few times it would actually run longer than a minute it would die when I was listening to Slacker Radio and I would get a text. The phone would cooperate until I actually SENT the message and then it'd die. I think I rotated the phone at this point, too, and it did the same freezing deal when I was typing up a comment on Facebook and rotated the phone.
So...in the end, I'm stuck. I'm not sure what it could be. I really don't feel like backing up and reflashing so I may just stay w/ a non-oc/uv kernel until I decided to flash again but if anyone has an idea on what to check then I'll be happy to do it. I saw somewhere that if you had an oc/uv kernel w/ boot settings set that you had to clear those out prior to flashing certain kernels or risk conflicts. Don't see how that would apply here since I didn't have boot settings set but figured I'd throw that out there before someone asked.
I'm running Serendipity 4.3 w/ SuckerPunch SmR 500hz #32 kernel w/ lag-fix enabled and I9088ZNKP1 modem on Android 2.2.1 for reference. VC is installed but obviously won't function on this non-oc/uv kernel. Voodoo v4 is installed for whatever that's worth.
Anyone have any ideas on wtf is going on??
And I apologize for the horribly long, terribly worded post. I've been at work since 8 this morning and I'll be here til midnight...I'm running on fumes at this point. Woo...lol Thanks in advance, guys.
HTCOmega said:
Ok, so here's the deal - I'm not sure how best to explain this so bare with me... basically I've been running various oc/uv kernels for a while now on my Captivate and have had minimal problems with them. I've had the occasional freeze due to too low uv settings but never anything as weird as the freeze issue I'm having now.
I d/led several kernels to play with and ended up with GB's Steam kernel via Serendipity 4.3 (which is the ROM I'm using now), moved onto Suckerpunch's Suckerpunch-SmR-#27-1280-500hz-CWM to Speedmod-Kernel-i897-k12s-cold-500hz-CWM I think, then to GB's rGB-v.4-011811-voodoo-cwm and now I'm on Suckerpunch-SmR-500mz-#32-CWM (or w/e the full name is...) The issue is that my phone is randomly freezing w/o Voltage Control/SetCPU/Galaxy Tuner running or even installed (as is normally the reason for freezing with me and oc/uv kernels). Now I had VC and GT installed but realized GT wasn't going to be much use so I uninstalled and VC was never set to keep settings at boot so I don't think that VC would be the culprit but I'm not sure...but anyways, I noticed that the freezes started the other night after I tried to add a task widget to my ADW EX launcher via SpringPad with the current screen full. When that happened, my phone lost it's mind...it caused the launcher to repeatedly FC and when you would reopen the launcher w/ the home key it would load to a point where the widgets started to load then it was like it hit what was supposed to be that SP widget but then it would realize the screen was full and would FC again. Well, I FINALLY managed to clear the launcher data, retried, no success, uninstalled SpringPad, launcher still FC'd, uninstalled launcher, no FC (as it wasn't there anymore...) but the phone would now randomly freeze up with little to no provocation. I finally broke down and flashed a different kernel to see if it would help and oddly enough it did. It was only when I flashed a non-oc/uv kernel that it would stop freezing. Now I can't see any correlation between the freaking out launcher and the kernel but who knows, right? I tested my theory by leaving the launcher and app uninstalled and reflashed a ov/uc kernel. About a minute after loading the phone would freeze. The few times it would actually run longer than a minute it would die when I was listening to Slacker Radio and I would get a text. The phone would cooperate until I actually SENT the message and then it'd die. I think I rotated the phone at this point, too, and it did the same freezing deal when I was typing up a comment on Facebook and rotated the phone.
So...in the end, I'm stuck. I'm not sure what it could be. I really don't feel like backing up and reflashing so I may just stay w/ a non-oc/uv kernel until I decided to flash again but if anyone has an idea on what to check then I'll be happy to do it. I saw somewhere that if you had an oc/uv kernel w/ boot settings set that you had to clear those out prior to flashing certain kernels or risk conflicts. Don't see how that would apply here since I didn't have boot settings set but figured I'd throw that out there before someone asked.
I'm running Serendipity 4.3 w/ SuckerPunch SmR 500hz #32 kernel w/ lag-fix enabled and I9088ZNKP1 modem on Android 2.2.1 for reference. VC is installed but obviously won't function on this non-oc/uv kernel. Voodoo v4 is installed for whatever that's worth.
Anyone have any ideas on wtf is going on??
And I apologize for the horribly long, terribly worded post. I've been at work since 8 this morning and I'll be here til midnight...I'm running on fumes at this point. Woo...lol Thanks in advance, guys.
Click to expand...
Click to collapse
Kernel flashing doesn't always go smoothly. Repeated kernel flashing without complete system wipes in between can cause some things to start going horribly wrong.
Don't use SetCPU to set clockspeeds. Just stick with voltage control.
If you forgot to disable any lagfixes at any point along the way, that could explain alot of the problem.
Suckerpunch kernel is a great concept and is showing alot of promise, but I personally have had alot of stability issues while using it, including random freezes (YMMV, of couse).
Just my opinion, but I would just back up all your data, flash back to stock, master clear, wipe all your cache data, reflash your rom, pick a kernel and stick with it for a while. If you want pure stability and battery life, use the most recent version of either DG's Firebird kernel 2 or Hardcore's speedmod kernel. If you want stability and oc/uv enabled, stick with Glitterball's kernel. Those 3 have been the best for me personally (again, YMMV).
FYI, I installed Blitzkrieg Kernel 1.0. My phone phone was very unstable and would restart often. Guess mine is one on the "picky" ones. Went back to GingerVolt 1.3 and all is well.
Thank you!
At least you got it installed, I couldn't even get that!
Sent from my Gingervolt-ed VS910 4G using xda premium
Mark Once Again said:
FYI, I installed Blitzkrieg Kernel 1.0. My phone phone was very unstable and would restart often. Guess mine is one on the "picky" ones. Went back to GingerVolt 1.3 and all is well.
Thank you!
Click to expand...
Click to collapse
Was it still unstable if you turned it down to 1GHz instead of keeping it at 1.5GHz?
I never could get that far. As soon as the phone was almost up it would restart. I tried about 5 or six times. I am happy with the phone without Blitzkrieg. Just thought I would pass along the info.
Thanks to all!
Make sure it's not plugged in on the initial boot after the install. Mine would reboot as well...until I unplugged it. Once in the OS, then I undercooked to a more stable 1.4GHz...
vortmax said:
Make sure it's not plugged in on the initial boot after the install. Mine would reboot as well...until I unplugged it. Once in the OS, then I undercooked to a more stable 1.4GHz...
Click to expand...
Click to collapse
I wonder why of all things, that would make a difference. You must've figured that out by chance? Haha
Sent from my Supercharged, Blitzed LG Revolution using xda premium.
I tried plugged into the usb on my pc, plugged into the charger and not plugged in at all. Same result each time. No complaint, just thought it might help having the info out there.
Thanks again!
You might try first installing a CPU utility like setcpu, and setting it to do no more than 1ghz on boot, and then flash it
Sent from my VS910 4G
Guys I have the same issues on GingerVolt 1.3 with the Blitzkrieg kernel.
Random reboots.
The phone starts vibrating randomly for like 10 seconds, then reboots. Happens like 10 times a day.
I tried to play with the SetCPU Over Clock settings, with no luck. I lowered max CPU to 1ghz max, I even removed set CPU, nothing has helped.
going to try to re-flash GingerVolt with the stock Kernel see if that helps. I don't need the OC Kernel if thats causing the issue.
brad08stanggt said:
Guys I have the same issues on GingerVolt 1.3 with the Blitzkrieg kernel.
Random reboots.
The phone starts vibrating randomly for like 10 seconds, then reboots. Happens like 10 times a day.
I tried to play with the SetCPU Over Clock settings, with no luck. I lowered max CPU to 1ghz max, I even removed set CPU, nothing has helped.
going to try to re-flash GingerVolt with the stock Kernel see if that helps. I don't need the OC Kernel if thats causing the issue.
Click to expand...
Click to collapse
Turn up the min. That fixed it for me
brad08stanggt said:
Guys I have the same issues on GingerVolt 1.3 with the Blitzkrieg kernel.
Random reboots.
The phone starts vibrating randomly for like 10 seconds, then reboots. Happens like 10 times a day.
I tried to play with the SetCPU Over Clock settings, with no luck. I lowered max CPU to 1ghz max, I even removed set CPU, nothing has helped.
going to try to re-flash GingerVolt with the stock Kernel see if that helps. I don't need the OC Kernel if thats causing the issue.
Click to expand...
Click to collapse
You can turn off the haptic feedback to minimize that vibration reboot but it won't solve the issue tho
BLITZ Bulletproof ledded AWD SuperCharged GV + Nitro ;p
For those who use blitzkrieg kernel I recommend using cpu tuner instead of setcpu
I've been testing both app extensively for the past 2 weeks and notice cpu tuner is much more stable than set cpu and both have the same features
I use the free set cpu verison that you can download on the xda site that's the same as the paid version you get on the market
BLITZ Bulletproof ledded AWD SuperCharged GV + Nitro ;p
Guys I seem to still be having the issue, I dont get it.
I did a factory reset, cleared all caches, and reinstalled plain old GingerVolt 1.3 for about 1 week with no issues. But i really didnt set up the phone completely, just installed the basics i need (work email, gmail, contacts, calendar, pandora).
I imagined it was the blitzkrieg kernel at this point, so I wouldn't put it back. so i did a titanium restore of my old apps and system data, but did not re-flash the blitzkrieg kernel. I figured this was my best way to get everything set up with my preferences again. I have specific settings for a lot of stuff, it would take forever to redo.
It was fine all day yesterday and today its rebooting again. Set CPU did reinstall as part of my restore.
Does gingervolt 1.3 do any undervolting/clock speed adjustments by default? My set CPU was set to min 245 and max 1024. I bumped up the 245 to 768, but I am wondering if that even the cause. What are the stock clock speeds? Or does it run at 1ghz all the time in stock form?
I have the same problem, my phone vibrates for ten seconds then resets. Or the screen stops working and I have to lock and unlock the phone for it to begin working again.
keynith said:
I have the same problem, my phone vibrates for ten seconds then resets. Or the screen stops working and I have to lock and unlock the phone for it to begin working again.
Click to expand...
Click to collapse
keynith, try to set the min cpu speed to 768 in setcpu.
So far after changing the min cpu speed i haven't had any issues again.
Did that yesterday and no problems since seemed to work
Sent from my VS910 4G using XDA App
brad08stanggt said:
Guys I seem to still be having the issue, I dont get it.
I did a factory reset, cleared all caches, and reinstalled plain old GingerVolt 1.3 for about 1 week with no issues. But i really didnt set up the phone completely, just installed the basics i need (work email, gmail, contacts, calendar, pandora).
I imagined it was the blitzkrieg kernel at this point, so I wouldn't put it back. so i did a titanium restore of my old apps and system data, but did not re-flash the blitzkrieg kernel. I figured this was my best way to get everything set up with my preferences again. I have specific settings for a lot of stuff, it would take forever to redo.
It was fine all day yesterday and today its rebooting again. Set CPU did reinstall as part of my restore.
Does gingervolt 1.3 do any undervolting/clock speed adjustments by default? My set CPU was set to min 245 and max 1024. I bumped up the 245 to 768, but I am wondering if that even the cause. What are the stock clock speeds? Or does it run at 1ghz all the time in stock form?
Click to expand...
Click to collapse
Best thing I can say to do is to Restore to default and install things one or two at a time. It's likely an App causing the issue. I have had that happen a few times on my Droid 2 Global. Every time I would run the Goggle Nav App, my phone would randomly reboot. Don't have it installed, would be perfectly fine, until I installed Pandora app. Some buggy apps can cause such issue, and also bad settings. So, I would suggest going the 'long way' and starting from scratch and installing only necessary apps one or two at a time. If things work good, move on to next apps. When things go bad, recall the apps you just installed where the problem occurred. Restore your phone, install only those apps and see if you have reboot issues. If so, you are closing in to finding the real problem. I doubt, even by the post you wrote, that it's the phone or hardware. You need a factory fresh restore, including wiping ALL data, including settings for your apps.
-Cybie
Well?
I don't know if you guys fixed your problems yet, but I kinda had some of the same issues and I do not use CPU Tuner or Set CPU! Also I know that when you install Blitz 1.3 It defaults to normal CPU speeds that are already in phone settings as checked by CPU Spy after flashing Blitz. I have been using Antutu CPU Master Pro to set speeds and profiles works great for the price I use it on my Viewsonic G-tablet as well! Anyway what my first issue is the screen locks I had them all the time and the only way I kept them from happening was to set my min at the 245.76 MHz and my all the time max at 1200MHz. I also set the screen off at 122.88MHz - 245.76MHz On demand scaling profile to keep it not wakening from sleep quick enough. Antutu has all kinds of settings in the Pro version and If you want a overclock I think its the best to use.
The only Issue I have not figured out is you guys get a 10 sec vibrate then a reboot I get a Vibrate forever until I reboot I got woke up this morning at 4:00 A.M. by my phone vibrating next to my bed only happens at night and only when I start receiving emails early in the morning. I tried several screen off settings and not having vibration on at all and still happens figure that one out and I will gladly try anything you come up with!!! The only time it doesn't do it is if it is plugged in and charging!
Softkey lights
I've successfully rooted my revo and have added gingervolt and blitzkrieg.
The softkeys will illuminate about every minute for a second or flash twice when in sleep-mode. I did some reading and tried to reboot and change display settings but they still keep going on and off. Any help is appreciated.
EDIT: charging to 100% fixed this.
Thanks for the quick reply and all your other posts too mt, they are very informative.
anangelablaze said:
I've successfully rooted my revo and have added gingervolt and blitzkrieg.
The softkeys will illuminate about every minute for a second or flash twice when in sleep-mode. I did some reading and tried to reboot and change display settings but they still keep going on and off. Any help is appreciated.
Click to expand...
Click to collapse
Charge it to 100% and it will stop
Hello all,
so in the effort to make my O4X last like a normal smartphone when not in use iv'e rooted it,unlocked the b/l and flashed custom kerenal.
i did managed to go from an avg. -10%/hr battery drain to 5%/hr but still even if i dont use the phone it will go down alot.
i've tried setcpu,trickster,no frills cpu and none of them could really keep the cpu in the freq. i want. it shos sucess in appling the values but then it jumps below and above the value's iv'e set.
what can be done?
thank you
Have you tried no-frills cpu setting to prevent system for making changes to the cpu frequences?
Yes.. Still not sticking and ignore the freq. I set
@genia.m which kernel are you using ?
Currently I'm on the latest Werewolfjb.
It happened with stock kerenal too..
Might be the rom's fault?
Well it can be, I believe it is the kernel but still, try to change your rom to one which has been reported to not having the baseband wakelock and similar wakelocks . It is the Nvidia Tegra 3 which overrides the definitions and sets them to default. It used to happen with me in stock and on cm too, but I changed to another stock rom , a modified one, and is working like a charm, no stupid wakes.
Try and post the result if you want !