Database Develop

Anyone can help me with m110s galaxy s corean version please !!

I NEED TO FLASH OR CHANGE ROM IN MY M100S GALAXY S COREAN VERSIO IS THIS POSIBLE
sorry for my poor english

mikeppl said:
I NEED TO FLASH OR CHANGE ROM IN MY M100S GALAXY S COREAN VERSIO IS THIS POSIBLE
sorry for my poor english
Click to expand...
Click to collapse
hi bro, this is only an advise or suggestion.. or educated guess..
since the M100S is found in ASIA.. i guess, you can download the ASIA firmware from the website below and use the latest firmware available.
http://samsung-firmware.webs.com/WEBPROTECT-samsungi9000.htm
**you must be registered to be able to download the firmwares available on the site.
Do take note that your phone does have that antenna feature and korean custom content.. if you do update your firmware to the EU/EURO version.. you might lose the application to be able to use it unless there is a special menu under Settings to configure and use it.

i got a problem with firmware version
i got a problem with firmware version
when i type *#1234#
i got this
PDA: M110S.DF30.1854
PHONE:M110S.DF29.0944.ST
H/W:REVO.8
MOVINANDF29
i really need to flash to european version and lose all corean trash
i really thanks for your help

Isn't Korean phone version slightly different having a TV tuner built in?
Better check if you can easily flash a firmware.

go: http://matpclub.com/board/index.html?id=tipn&no=3
download tools.zip (contains ODIN3 and CSC file for M110S)
follow directions found on XDA or Samdroid -

might be a good read: http://forum.xda-developers.com/showthread.php?t=725407

[Q] Upgrading to Gingerbread without messing up Kies

Hi all,
I would love to upgrade my P1000 to Gingerbread.
At the moment the infos about my device are:
PDA: P1000XWJMI
PHONE: P1000XXJMA
CSC: P1000CPWJM2
This is what I see pressing *#1234#
Now the About Device menu says:
Model: GT-P1000
FW: 2.2
Baseband: P1000XXJMA
Kernel: 2.6.32.9
Build: FROYO.XWJMI
As stated above I would like to upgrade to a stock gingerbread release so that Kies does not say unable to update your phone. I guess I need proper files to do that. Can anyone address me to the right links and of course the steps to do it via Odin (what to check/unchek etc)?
Thanks in advance,
Fed.

Read the development section. There are PLENTY of posts on how to do it.

Sorry, but the forum is full of posts and i can't find specific threads for my issue. Informations are here and there and as you know understanding one little bit badly could make me brick my P1000. I would need to know what software to use so that the phone regional settings do not mess with Kies. If possible a link to a post (or more posts) and links to softwares are welcome.
Oh, knowing how to make a dump of my actual ROM would not be bad if anyone can help.

Your present firmware XWJMI is European(Austria, Belgium, France, Germany, Hungary, Italy, Spain, United Kingdom).....
Unfortunately there is still no official upgrade for your region from Samsung so whatever ROM you flash whether from this forum or elsewhere, Kies will always see it as "cannot be updated".
Unless you want to try the Asian firmware-like I have.......

[Q] Can I flash P1000T with P1000 firmware?

Hello,
I am a noob at this… I need helps from you all…
I got an Australia Telstra Galaxy Tab GT-P1000T.
PDA : P1000TDVJJ3
PHONE : P1000TDVJJ3
CSC : P1000TDVTTELJJ4
Kernel version: 2.6.32.9 [email protected] #1
Build number: FROYO.DVJJ3
I would like to convert it to generic Asia firmware, in order to have Chinese and Malay language. I have read through many informative tutorials here. I wonder whether I can flash the firmware of this P1000T, like other P1000? Which firmware should I use to gain access to KIES for future update?
Thanks very much!

No you can't. Officially gingerbread just came out from helstra but I suggest you try another like Boca or overcome.
Sent from my GT-P1000 using XDA App

And don't forget samfirmware
Sent from my GT-P1000 using XDA App

p820 said:
Hello,
I am a noob at this… I need helps from you all…
I got an Australia Telstra Galaxy Tab GT-P1000T.
PDA : P1000TDVJJ3
PHONE : P1000TDVJJ3
CSC : P1000TDVTTELJJ4
Kernel version: 2.6.32.9 [email protected] #1
Build number: FROYO.DVJJ3
I would like to convert it to generic Asia firmware, in order to have Chinese and Malay language. I have read through many informative tutorials here. I wonder whether I can flash the firmware of this P1000T, like other P1000? Which firmware should I use to gain access to KIES for future update?
Thanks very much![/QUOT
Heres a link to a forum post that has a rom that looks like it could be what you want, well it has alot of languages supported natively.
http://forum.xda-developers.com/showthread.php?t=1589596
Click to expand...
Click to collapse

[Q] Is this the correct 2.3.4 Official ROM for my phone?

hi Guys
I have bought one when I was at Du?bia duty free.
The phone has Froyo 2.2.1
and *#1234# give the below data
PDA;S5570JPKA3
PHONE; S5570JXKA2
CSC; S5570OJPKA3
I would like to keep the same language packs.
KIES won't give me any update for my device.
however I see on sammobile firmware page
GT-S5570 S5570JPKQ8 ## 2.3.4 2011 September S5570OJPKQ7 Mddle East Download
http://hotfile.com/dl/130918553/4c3c68b/S5570JPKQ8.rar.html
Is this the correct one for my mobile?
Thanks

www[dot]sammobile[dot]com/firmware/?page=1&t=1
Refer to this link.
Sorry. New User so can't post links.

Yes. That FW suport Arabic, Persian ,Ordo and ... show RTL language very well.
I use it but now i have 2.3.5 firmware with RTL suport ( one pakage firmware)

adib_17 said:
Yes. That FW suport Arabic, Persian ,Ordo and ... show RTL language very well.
I use it but now i have 2.3.5 firmware with RTL suport ( one pakage firmware)
Click to expand...
Click to collapse
Thanks Guys
I took the plunge and it was a very easy process.
I did not use One package though..
However this is my new Firmware info under *#1234#
pda: s5570jpkq8
phone: s5570xwkq5
csc: s5570ojpkq7

[Q] Galaxy SPlus problem

Hello everyone,
I was trying to update firmware through Kies and in between this period i unplugged my phone. it was bricked, but i took it to market and they installed the Gingerbread in my phone again
Firmware 2.3.5
Baseband I9001XXKPF
Kernel Version 2.6.35.7-pref ([email protected] 156 #1)
Build number GINGERBREAD.JPKP3
after this installation i am having some problem with the phone, WIFI is disconnecting again and again every 1minute. And phone is consuming more battery than before. Please help me, is there any fix for this problem????

Just flash the firmware again with odin

sammobile <- here you get the stock firmware you want
here is a howto with odin

Dear All,
thanks for the reply, I am living in Saudi Arabia i selected the country "Saudi Arabia" from Sam Mobile, after selecting country i got this firmware pic attached! IS this default firmware, i mean the original gingerbread firmware which comes with the phone?
And how to install it again? i read that article on broodplank, but usage of odin is different than i found on XDA.
please advise, shall be very thankful to you all!

Ranjhazhj said:
Dear All,
thanks for the reply, I am living in Saudi Arabia i selected the country "Saudi Arabia" from Sam Mobile, after selecting country i got this firmware pic attached! IS this default firmware, i mean the original gingerbread firmware which comes with the phone?
And how to install it again? i read that article on broodplank, but usage of odin is different than i found on XDA.
please advise, shall be very thankful to you all!
Click to expand...
Click to collapse
Sorry i forget to post this picture, this list has all firmwares for Middle East countries, I am confused now and don't know these firmwares will be in English Language OR not? I mean i don't need Arabic Firmware (Gingerbread in Arabic) because i don't know Arabic :s

Ranjhazhj said:
Sorry i forget to post this picture, this list has all firmwares for Middle East countries, I am confused now and don't know these firmwares will be in English Language OR not? I mean i don't need Arabic Firmware (Gingerbread in Arabic) because i don't know Arabic :s
Click to expand...
Click to collapse
I love the 1969 date (year when UNIX had beed developed) I would try the first one.

Ranjhazhj said:
Dear All,
thanks for the reply, I am living in Saudi Arabia i selected the country "Saudi Arabia" from Sam Mobile, after selecting country i got this firmware pic attached! IS this default firmware, i mean the original gingerbread firmware which comes with the phone?
And how to install it again? i read that article on broodplank, but usage of odin is different than i found on XDA.
please advise, shall be very thankful to you all!
Click to expand...
Click to collapse
See the wiki for instructions: http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001#Flashing_in_Windows
The 1969 thing is probably because somehow the time wasn't set properly, so it probably defaulted to -1 or something like that. Let 0 be the first of January 1970 (Unix epoch as Jacol82 said) and -1 is in December 1969