[Q] Hero does not recognize SD card & ADB does not work. - Hero CDMA Q&A, Help & Troubleshooting

EDIT: I think that these steps are helpful for someone who has same issues.
(A) I fixed SDcard issue.
1. run into FASTBOOT mode (press VOL-UP + POWER in booting)
2. run the following command from PC: % fastboot oem enableqxdm 0
(B) I could not fix USB brick issue. But I can flash RUU to my cell (no ADB connect, S-ON)
1. make gold card (ref. http://psas.revskills.de/?q=goldcard)
2. put RUU into gold card
3. flash RUU via HBOOT
NOTE:
After these steps, USB may be still bricked. You should better use older RUU for getting root
without ADB commands by AndroRoot or others. (I used newest RUU so that I lost root forever. LOL)
Click to expand...
Click to collapse
ORIGINAL POST:
My Hero has some problems two days ago. I did many things but it still does not work well. How do I fix these problems? Could anyone give me an advice?
ROM: AOSP 2.3.3 (ver04/21/2011) w/ Firerats 1.5.3 (100 4) + Kifno Universal Scripts 1.5
Recovery: aospCWMod-HC-20110421.img (w/ firerat-recovery
SD card: 8GB(real size:7.45GB) (7.0GB FAT32 + 256ext4 + 128swap)
What happened:
* doesnt recognize SD card not only after booting but also from Recovery mode.
* cant connect with Hero via ADB not only from USB cable and also from wireless(ADB wireless)
(first, I could connect with Hero, but suddenly I couldnt)
* Any other functions on HERO may work well (Call, Network, Wifi are available)
* USB cable still supply power fortunately.
What did I do before this matter happened:
* "Backup Current ROM" via ROM Manager 4.1.0.0
It did not work well although messages (Waiting for SD card to mount (XXsec)) appear. After that my phone does not recognize SD card but ADB was still working.
* After doing "Partition SD card" via ROM Manager 4.1.0.0, typing "parted" on ADB and so on (as follows), ADB was gone.
What I did to solve this problem:
* Reformat and Repartiton SD card (8GB/FAT32, 8GB(FAT32+ext3(256MB)+swap(128MB))
* Change another SD card (4GB/FAT32)
* Try another USB cable
* Partition SD card via Recovery mode
* Partition SD card via ROM Manager 4.1.0.0
* (parted command does not exist on Recovery mode)
* Reinstall Android SDK on PC
Others:
* SD card can be read from Windows 7 after my HERO did not recognizing it. (All of data on FAT32 were copied from SD to other)
* On root in SD card I found some files I have never seen before.
Those names are "qxdm_(DATE)_(TIME)_1.dm"
This files are created after reformat SD card.

I tried a few:
* ext3 partition is changed from ext3 to ext4, but still not recognize.
* Fortunately ADB wireless WORKS.
What causes that my HERO does not recognize SD card on Recovery mode?
(SD slot destroyed? or not?)
Can I reinstall recovery image and reflash ROMs via ADB wireless without using SD card? (If I can, does it make my HERO a brick?)
Any idea?

tbb-xda said:
I tried a few:
* ext3 partition is changed from ext3 to ext4, but still not recognize.
* Fortunately ADB wireless WORKS.
What causes that my HERO does not recognize SD card on Recovery mode?
(SD slot destroyed? or not?)
Can I reinstall recovery image and reflash ROMs via ADB wireless without using SD card? (If I can, does it make my HERO a brick?)
Any idea?
Click to expand...
Click to collapse
It sounds like you sorta found a solution. I would say it sounds like you're running too many tweaks. Why are you formatting your sd? Are you using data2ext or a2sd? If you use firerat you shouldn't need that. Also, to use SD in recovery you need to mount sd in the mounts/storage menu. I guess I'm a little unsure of where you're at now.

Thanks, il Duce.
> I would say it sounds like you're running too many tweaks. Why are you formatting your sd? Are you using data2ext or a2sd? If you use firerat you shouldn't need that.
Sure. All you said is right.
I used data2ext or a2sd in other ROMs once before using firerat.
Now I'm using firerat instead of it then I dont use data2ext or a2sd.
I was too lazy to remove ext4 partition.
The reason why formatting my sd card again is that as mounting sd card was not available due to these problems and I thought that its partition might be corrupted and I should fix it due to formatting it. But I had no luck..
> Also, to use SD in recovery you need to mount sd in the mounts/storage menu.I guess I'm a little unsure of where you're at now.
My explanation seemed like obvious. I wrote many unwanted things.
I couldnt mount sd in recovery menu. It said only "Error mounting /sdcard!" (also /sd-ext is same).
Before this problem happened, I was able to mount sd in it and in ROMs.
All I want to do is to use SD card in recover and in ROM again.

I did additional few things. But still I cant mount sd card.
* My hero in fastboot can be recognized from my laptop. "fastboot devices" can work well. But my hero in recovery cannot be recognized. "adb devices" cant get anything.
-> USB cable may be OK.
+ fasboot flash/boot does not work. (I found a posts that said that flash via fastboot doesnt work on Hero CDMA. Right?)
* My hero in hboot can access SD card. "HERCIMG.zip" on root in sd card can be accessed. But my hero in recovery cannot access sd card.
-> SD slot and SD card may be OK.
+ I cant find available HERCIMG.zip for HBOOT 1.47.
Can I flash recovery in terminal on ROM?

I would recommend the following:
1. Remove all partitions from your SD card, reformat it to FAT32
2. Run RUU on your phone, that should overwrite everything - you will need to re-root, but it will remove all the dingleberries from your phone.
Hope this helps.

tbb-xda said:
* My hero in fastboot can be recognized from my laptop. "fastboot devices" can work well. But my hero in recovery cannot be recognized. "adb devices" cant get anything.
Click to expand...
Click to collapse
Oh Dude, why didn't you say this earlier... I assumed that fastboot/HBOOT is not working on your phone.
1. You can absolutely flash recovery or any other images from fastboot, on a hero. Do "fastboot flash recovery <recovery.img>"
2. You can also flash recovery from HBOOT... look for the right HERCIMG.zip, place it on the root of the SD card, boot your device by holding down the volume down + power

andythegreenguy said:
Oh Dude, why didn't you say this earlier... I assumed that fastboot/HBOOT is not working on your phone.
Click to expand...
Click to collapse
Sorry I would have written it more orderly.
I already tried both and tried them again. But both seems like not work well.
HERC XC SHIP S-ON, HBOOT 1.47.0000 (HERO20000),
MICROP-0110, TOUCH PANEL-SYN0104,
RADIO-2.42.02.10.29, Mar 1 2010,16:02:39
1. You can absolutely flash recovery or any other images from fastboot, on a hero. Do "fastboot flash recovery <recovery.img>"
Click to expand...
Click to collapse
I tried some recovery.img (aospCWMod-HC-20110421.img, recovery-RA-heroc-v1.6.2.img
but it says FAILED (remote:not allow).
2. You can also flash recovery from HBOOT... look for the right HERCIMG.zip, place it on the root of the SD card, boot your device by holding down the volume down + power
Click to expand...
Click to collapse
I find several HERCIMG.zip via some file share services that Google teaches me. I tried one of them (I got it from http://forum.xda-developers.com/archive/index.php/t-792170.html) and it seems like doing well (as below).
Ohters say "CID incorrect" "Update Fail!" after Checking.
It says:
SD Checking...
<snip>
Loading...[HERCIMG.zip]
(refresh screen)
Checking..[HERCIMG.zip]
(refresh screen)
<VOL UP> FastBoot Mode
<BACK> Simlock
<HOME> Recovery
press <HOME>, go to Recovery, then boot.
But nothing changes. Still I have same issue.
Should I look for another HERCIMG.zip?

I have questions like noobish.
In my thought, these issues (cant mount sdcard in recovery and ROM) may be solved by reflashing ROM image again. Is it right?
Does "flash_image" via terminal on ROMs work well?
(I've not done it from terminal.)
If using firerat, is it necessary to flash FR-recovery over just flashed recovery to avoid rebooting back into recovery?
(I worry that if sdcard were not still mounted in recovery after doing "flash_image recovery" I would have no solution to escape from the bootloop into recovery mode because I cant connect phone in recovery via ADB now.)
Does the following steps seem worth a try?
1. push a recovery image to inner memory (e.g. /data/local/) via ADB wireless
2. open terminal, "su" and "flash_image recovery <above image>"

tbb-xda said:
HERC XC SHIP S-ON, HBOOT 1.47.0000 (HERO20000),
MICROP-0110, TOUCH PANEL-SYN0104,
RADIO-2.42.02.10.29, Mar 1 2010,16:02:39
Click to expand...
Click to collapse
Doesn't seem like you are S-off or you have Eng-SPL. The first one would have allowed you to use HBoot and the second to run fastboot.
If you were S-Off and had the Eng-SPL, the screen should have read something like this...
HERC XC ENG S-OFF...
Anyways, did you try to run RUU? You should try the one found on the HTC website for the CDMA Hero.

Thanks, all.
Fortunately I seems like fixing these problem.
But it's not known exactly why I fixed these problems.
In view of andythegreenguy's advice, I tried to run RUU on my phone.
But I cant connect my phone via ADB.
Then I reinstall HTC driver for Windows 7 once again. Of course, I already tried it before but still it didnt work well.
Booting into FASTBOOT because I could connect my phone via FASTBOOT, and connecting my phone with USB and trying to replace HTC driver.
But it still said that the driver was already installed.
But after rebooting into recovery mode, my laptop recognized it. And sdcard could be mounted in recovery mode for no special reasons.
After booting sdcard works well in ROMs.
(No qxdm_*.dm files I had seen first after these problems occurred doesnt be created any more)
It seems strange to me that connecting ADB act on the behavior of mounting sdcard. I still worry that the same issues will happen. Does this happen?
Anyway, thank all guys giving advices to me.
ps. I'll try S-OFF and ENG-SPL for avoiding the same issues.

Good to hear that your problems seem to be solved.
BTW, you don't need to have ADB running to run RUU, you just need HTC sync properly installed and have the RUU executable from HTC website.

OMG... I got excited for nothing. I didnt fix it basically. LOL
After that, I tried to flash recovery image.
flash recovery(aosp 4/21) and flash FR-recovery(1.5.3) w/ full wipe and reboot into recovery.
But the same issues occured again. (hero in recovery didnt mount sdcard again laptop didnt connect it via ADB)
It goes worse in point of losing booting ROMs. HBOOT, FASTBOOT work but didnt do S-OFF and ENG-SPL.
I acted stupid. I should have done S-OFF or ENG-SPL before flashing recovery.
I guess that the I have the same chance as the previous post (occasionally ADB works well in recovery). I will do serveral things that I did. (and try on another PC).

andythegreenguy said:
Good to hear that your problems seem to be solved.
Click to expand...
Click to collapse
Thanks. But I completely got no luck. LOL
BTW, you don't need to have ADB running to run RUU, you just need HTC sync properly installed and have the RUU executable from HTC website.
Click to expand...
Click to collapse
Oops. I guessed wrong.
I could connect Hero in FASTBOOT via USB then run "HTC Sprint Hero MR 2.27.651.6.exe". It seemed to work. But it gave 'Error [131] Incorrect Customer ID'.
I was looking for some articles about Error[131]. They said that driver's name should be "My MTC" not "HTC Bootloader".
But my laptop shows "HTC Bootloader" after re-install HTC Sync 2.0.40 again and updating driver from "Devices and Printers".
Does it cause error?

I am all confused about what your phone is doing... . Anyways, switch off your phone (battery out, if nothing else works) and follow these steps:
1. Backup your SD card
2. Remove all partitions from the SD card and format it to FAT32
3. Install HTC sync on your computer
4. Download the RUU to your computer
5. Switch on your phone
6. Run the RUU from your computer and see what you get (report back)

andythegreenguy said:
I am all confused about what your phone is doing... . Anyways, switch off your phone (battery out, if nothing else works) and follow these steps:
1. Backup your SD card
2. Remove all partitions from the SD card and format it to FAT32
3. Install HTC sync on your computer
4. Download the RUU to your computer
5. Switch on your phone
6. Run the RUU from your computer and see what you get (report back)
Click to expand...
Click to collapse
I did above steps.
1. already done backup
2. Use "Mini Tool Partition Wizard 5" for removing all partition and making FAT32. (and use "Panasonic SD formatter 3.0" for re-formatting sdcard)
3, use HTC Sync 2.0.40
4. RUU is HTC Sprint Hero MR 2.27.651.6.exe
5. connect usb cable to hero
6. run RUU and turn on hero in accordance with its guidance.
hero is booting up normally and it shows FASTBOOT USB on the top of screen.
then rebooting by RUU and it shows alternative HTC boot screen
it says "Error 131 Customer ID error" and quit.
# I tried it from Windows 7 and Windows Vista. But both are same.
My career is KDDI Mobile. Maybe it borrows sprint network
(ROMs showed that the career was sprint) Is it concerned with Error 131?

tbb-xda said:
My career is KDDI Mobile. Maybe it borrows sprint network (ROMs showed that the career was sprint) Is it concerned with Error 131?
Click to expand...
Click to collapse
The HTC RUU is for Sprint only... hence the error. Do you have a RUU specific to your carrier?

andythegreenguy said:
The HTC RUU is for Sprint only... hence the error. Do you have a RUU specific to your carrier?
Click to expand...
Click to collapse
No I dont have it. I have checked that company's page for RUU but I had no clue.
I believed without no doubt thatit would work because KDDI services operates on Sprint networks as a MVNO and usually "Settings" shows "Sprint" as connected carreer.
BTW, I left hero in recovery mode all night.
I found the files "qxdm_*.dm" created on sdcard. What are these files?
These files seem to be created not only in recovery but also FASTBOOT, HBOOT.
Those file size seem to depend on running time after booting. (if the sizes exceed 65535KB, it seem to create a new file.)
I guess that after booting my phone may keep writing these files on sdcard and this may prevent phone from mounting sdcard...

I fixed SDcard issues ( not mounting). And I could flash RUU into phone by Gold Card.
Unfortunately, USB bricked issue are not solved.
But, I wrote up these steps for helping someone having same issues because I found many similar articles.
See my 1st Post.

Related

SD Card cannot be read and G1 firmware does not boot up (almost bricked)

Hi guys,
First off I want to say this site is great in what it is doing for the mobile phone world! This is my first post and I am a noob so be gentle haha! Well ok, i've messed up my g1 phone and its almost bricked. I think I have identified two problems:
Problem 1:
I was trying to partition my sd card using a method from a site called theunlockr.com. Where they used the apps2sd software:
http://www.youtube.com/watch?v=w_7n1g8jXgY
After performing the procedure, my 2 gig sd card cannot be read on my computer (comes up with "insert disc") and cannot be read on my phone as well. My SD card is completely wiped and I tried formatting it again but it still cannot be read.
Problem 2:
I tried to reboot my phone and now it gets to g1 tmobile screen but no further. To turn the phone off I have to take out the battery.
I can get into the recovery utility using the pwr and home buttons so I do not believe it is bricked, but as my computer cannot read the sd card, I am not able to copy any roms to make any progress.
My question is whether if after buying a new sd card and formatting it, can I simply reflash of my ROM by doing "alt & S" to make it work? The reason why I ask is whether I should simply send it back to TMob and play dumb to get a new phone or buy a new sd card and usb reader.
I am looking at it too simply and there is more to it? E.g have I messed around too much and damaged the file system links etc on my phone. Will a reflash of the cynogen rom using the recovery utility completely reset my phone and get me passed the boot screen loader to the operating system?
I had the following set up on my phone:
Firmware: Cyanogen 4.02
Recovery Image: 1
Recovery Utility build: JF v1.43
Thanks for your input!
Mepow!
Reflashing your phone if you messed up partion it will not work, if you pop out your sdcard and then try to boot it prob will, try a card reader and format and repartion or you can try recovery console and type ums_enable to try to mount your sd card while connect usb to your computer and try to format it that when and when you are done type ums_disable and then type reboot to reboot the phone
thanks tried that in the recovery console but it came up with
"ubs_enable not found". My computer unfortunately does not recognise the sd card.
You gotta type ums_enable not ubs as you said in the last post

CM 4.2.4 upgrade issue

Hi team,
Having some trouble rooting my g1 and upgrading to CM 4.2.4
I have been following a tutorial from here: http://androidandme.com/2009/08/news/how-to-root-a-t-mobile-g1-and-mytouch-3g-android-phone/
... to achieve my goal. Followed all of the steps fine and to a tee. Installed all of the suggested files from the suggested places.
Succesfully upgraded the radio image, then moved onto upgrading the SPL. Ran through and rebooted phone, until the never ending "Formatting Cache" notice came up on the automatic boot into the Recovery Mode.
(FYI: radio and SPL images were from http://code.google.com/p/sapphire-port-dream/)
Moved on to installing CM 4.2.4 after realising that the format was complete... Alt-W then Install from zip. Installed CM. Waited for prompt for completion... pressed reboot... then the boot hangs on the G1 startup screen.
Only way I could get out was to remove the battery. Went through the process again (Alt-W, SPL install, reboot, Alt-W, CM install, reboot, hang) numerous times, all with the same outcome.
Only thing that I can think of that I am doing wrong is pulled straight from CyanogenMod Wiki explanation: "I've noticed on some devices that when you fresh install the first time and you update with the rooted adp package from htc, reboot and then update to latest CM, some people get stuck at the tmobile logo. What I did was install the rooted adp package from htc, reboot and sign in all the way to home screen, then rebooted and installed the latest CM. That should get you past the first screen freeze if it happens to you."
As I am a noob, I have been unable to try this for the following reasons: 1. Where can I find the HTC rooted adp? and 2. How do I get this image onto the SD card when I can't boot in? I have tried without booting and my computer won't let me access via USB...
I was going through the process from factory settings. Is this my problem... Very confusing.
Realise that there are currently two active threads running in this section that are similar... but these guys seem to have done the wrong thing and are trying to right the ship... I can't seem to figure where I've gone wrong.
Thank you in advance for your assistance.
As well: could booting with camera + power get me into the Dreaming.nbh OS to get HTC root OS onto the SD card?
http://developer.htc.com/adp.html
Download the 1.6 recovery image. It is actually the 1.6 Android Dev Phone ROM, flash that via recovery console... then flash the cm update. Make sure you wipe before you start flashing.
As well, do you have your SD card partitioned? It would be a good idea to do that as well. Two ways to do it, manually, or download and update to RA's recovery image 1.2.3:
http://forum.xda-developers.com/showthread.php?t=566669
I would update to that recovery first, use the option to part my SD card, upgrade to ext3, wipe, flash 1.6 recovery, flash cm update, good to go!
Thanks for the quick reply! Very handy info... How do I get the images onto my SD card without being able to boot though?
Do you have another device like a camera, or mp3 player that can take a microsd? If so just hook it up and transfer.. otherwise you may need some additional devices.. I bought an adapter so my sd can plug directly into a usb.. other than those couple options, I haven't any more suggestions to offer ya. If you cant get past the boot screen to mount, I don't see how you can do it through your G1.. there might be some terminal commands you can try to mount to a computer.. but that's beyond me.
Nathanial said:
Thanks for the quick reply! Very handy info... How do I get the images onto my SD card without being able to boot though?
Click to expand...
Click to collapse
You take it out of the phone, while the battery is pulled, put it in an micro SD card reader, plug that into your computer, tada! If you computer doesn't have a slot for the standard SD card adapter, you can get microSD to USB adaptors most everywhere that sells electronics.
Or if you have cyan's recovery installed... you can hold Home+power
go to console, press enter and type
ums_enable
Click to expand...
Click to collapse
and it will mount the sd on your pc.....
put ums_disable to unmount
Sorry to be a noob, but what benefit does partitioning do?
If you have an EXT3 partition, you will have app2sd. If you also have a linux-swap partition, you will be able to have a swap file (in simple terms its like adding more ram)
The ext partition is for apps2sd, and the Linux-swap partition is to give a little extra memory for the ROM.
Thanks for all of your help lads! Up and running. Muchly appreciated!

Urgent help needed :(

I have had my g1 for about a year now and I rooted it a few months ago. I've been trying to update the rom but everytime I try to format the sd card on my pc it says no disk found in drive F. I have tried it on other computers. I tried it via usb and a card reader. When I put update.zip into the root folder it says it cant find it. Please someone help! I need my phone to be amazing again!
Is the card formatted in Fat32?
Yeah its formatted to Fat32
you have to assign the a sd card a drive letter.
assign the sd card a drive letter.
How do I do this?
Well I just assigned it a letter and the same thing happens. I really am stuck.
What are you trying to update from? What update are you trying to apply? What recovery are you using? Do you have a file manager on your phone like androzip? If you can answer some questions, you may have a few workarounds....
xxwigglesxx said:
I have had my g1 for about a year now and I rooted it a few months ago. I've been trying to update the rom but everytime I try to format the sd card on my pc it says no disk found in drive F. I have tried it on other computers. I tried it via usb and a card reader. When I put update.zip into the root folder it says it cant find it. Please someone help! I need my phone to be amazing again!
Click to expand...
Click to collapse
You could try doin it with your phone (since you said you're rooted) using recovery
If you're using Cyanogen's recovery there's a good guide on androidandme.com
http://bit.ly/61CXFo
If you're using Amon_Ra's recovery I think it's automated, I've never used it before but from what I understand the you have the option to do it from the recovery menu
I'm currently running cyanogen mod 4.1.11.1 I'm not sure of the recovery image and I am trying to update to the next version of cyanogen. I think it might be a problem with my phone :S I really dont know. I have looked online and nothing seems to work I can put any update onto the sd card but when I try to update on my phone it says the file doesnt exist
it should say what recovery you are using in the recovery screen.
connect to wifi spot, download the new amon ra recovery, and move it from the download folder to the root of the sdcard using androzip (from the market).
follow the steps to flash the new recovery in the amon thread.
the next steps from there are up to you.....you can try to repartion your card using the menu option in recovery and then try to mount your g1 to your computer in the recovery menu. the recovery will allow you to choose what size partitions you want (fat32, ext, and swap) and do all of it for you. very handy.
once you get it to mount to your computer, you're in business.
if you think your card is ok as is, you could always download the htc file and cm4.2.6 directly to your g1, move them from download folder to sd root, wipe everything and flash.
either way, if you run into problems with your card, you maybe without phone until you get a good card.
good luck
Hey thanks for the great replies. Still no luck though I downloaded the amon ra recovery image and did what it said but when on the terminal emulator I type mount -a and it says 'mounting /dev/block/mmcb1k0p2 om /system/sd failed: no such file or directory'
Bump! PLEASE HELP ME

Can't mount SD Card.

Have a 32B. It broke, so I swapped the insides of that one into another G1. The G1 boots into recovery, there's no ROM flashed on the Phone. I tried to mount the SD to PC. It shows that there's a disc connected. But it wont open it. The SD card will mount in my other phones, and connect to the PC via USB, USB dongle, and SD Adapter. I can't flash ROM's via recovery. All i get is this error:
Build : RA-dream-v.1.7.0
E:Can't mount /dev/block/mmcblk0
p1 (or /dev/block/mmcblk0)
(No such file or directory)
E: Can't mount SDCARD:
So I was like meh, I'll flash the ROM via ADB
ADB Isn't working either
just saying "device not found".
Anybody have any clue what this means?
Here's something to try:
Back up all the stuff on your SDCard to your computer using USB.
Unmount the SDCard from the computer.
Go to Settings/SD card, and unmount the card and select format.
(at this point I would turn on your WiFi if you have is to facilitate the faster Rom download your about to to, but it's not necessary)
Go to Rom Manager and select download Rom, and choose the one you want.
If its a cyanogen one, you will be asked to install google apps (gapps), Yes. Backup Current rom, Yes
When asked to reboot to install the Rom, Yes
If all this works out, replace you stuff on to your SDCard
Good luck, and let me know how you make out!
That would work, but my board has no ROM flashed on it. Can't access SD Card in Recovery. Can't push the rom to data with ADB.
Man, here's two way for this situation:
1. (Good) You just updated your radio in a wrong way. Try to do this right
2. (Bad) Your phone now is just a brick. You can use it like a hammer
Hope, your way is first. Try to reinstall radio, bootloader etc.
Litesorrows said:
That would work, but my board has no ROM flashed on it. Can't access SD Card in Recovery. Can't push the rom to data with ADB.
Click to expand...
Click to collapse
my g1 doesnt detect memory card....but dats because the thing that reads the sd card is loose but if i press on the bottom of the phone it reads...you could try that..but again you will have to keep on pressing on the bottom so that it flashes the entire rom works for me.
one question though how do you flash a rom via adb???
I know for a fact it's not bricked. It's just I took the board from my 1st G1, 2708+ and Everthing. Worked perfectly. Then i just put it inside a "New" G1 b/c that on didn't boot. The G1 boot's into Recovery, just wont access SD card. I hate my iPhone Xo that's the only phone I currently have. Don't let meh use iOS YoY.
I'll post Pic's soon. All I have is a ****ty 3G, and it's not on iOS so no autofocus. Unless a blurry cam pic can help. Otherwise I'll wait for the wife to get home with the Nokia.
Waiting for pictures!) А тут часом никто русский не затесался?)))

[Q] htc incredible s usb bricked and phone stuck on boot logo

Hi guys. I have a very large problem here.. About few days ago, I was transfering files from my pc to my phone via usb, suddenly the sd card got crashed(maybe) because i was not able to find it on my phone. but everything was fine in pc. then I formatted the sd card in fat32 and tried to hard reset the phone via cwm.. I went to 'wipe/factory data' . after formatting the system, it said unable to mount sd card\android secure- skipping formatting. Now the phone is not starting and i cant flash new rom via cwm because it says unable to mount sd card.. I am extreamly tensed. help me guys.
champ3767 said:
Hi guys. I have a very large problem here.. About few days ago, I was transfering files from my pc to my phone via usb, suddenly the sd card got crashed(maybe) because i was not able to find it on my phone. but everything was fine in pc. then I formatted the sd card in fat32 and tried to hard reset the phone via cwm.. I went to 'wipe/factory data' . after formatting the system, it said unable to mount sd card\android secure- skipping formatting. Now the phone is not starting and i cant flash new rom via cwm because it says unable to mount sd card.. I am extreamly tensed. help me guys.
Click to expand...
Click to collapse
Get a new SD card and format it with your PC and then mount it is your phone.
tried
tpbklake said:
Get a new SD card and format it with your PC and then mount it is your phone.
Click to expand...
Click to collapse
I tried almost 7 sd cards which were working on other HTC phones.
champ3767 said:
I tried almost 7 sd cards which were working on other HTC phones.
Click to expand...
Click to collapse
Not sure how much it may help but did you try putting your sdcard in some other HTC phone? If the phone recognizes it then can you format it through the phone and try again?
Also I am assuming that you were able to flash a different ROM earlier using the same recovery, i.e, you are using the correct version of the recovery; also that your card was not encrypted
no luck
srv.abhishek said:
Not sure how much it may help but did you try putting your sdcard in some other HTC phone? If the phone recognizes it then can you format it through the phone and try again?
Also I am assuming that you were able to flash a different ROM earlier using the same recovery, i.e, you are using the correct version of the recovery; also that your card was not encrypted
Click to expand...
Click to collapse
I tried sd card on other phones without any problem. I inserted atleast 7 sdcard but no luck
try flash your cwm to latest touch recovery , and mount your sd card.. flash cwm via adb.. there a tool somewhere in this forum..
Sent from my HTC Incredible S using xda app-developers app
about ruu
tpbklake said:
Get a new SD card and format it with your PC and then mount it is your phone.
Click to expand...
Click to collapse
can i flash this ruu with a different radio?
champ3767 said:
can i flash this ruu with a different radio?
Click to expand...
Click to collapse
i think i can help you!!
are you able to get into bootloader??
what HBOOT are you on??
also tell me the version!!
version
prunzzz said:
i think i can help you!!
are you able to get into bootloader??
what HBOOT are you on??
also tell me the version!!
Click to expand...
Click to collapse
My hboot version is 2.00.0002
champ3767 said:
My hboot version is 2.00.0002
Click to expand...
Click to collapse
since you are sOFF i dont think you can run RUU
so now do this,
1.open the RUU on PC (dont need to connect phone).Dont close the RUU window.
2.now on PC in Search, type %temp%
open the location
3.now there using search in that folder, search rom.zip
copy this .zip to c:/android
4.rename it to PG32IMG
5.nw put this PG32IMG.zip on phone
6.get int bootloader
7.it should automatically detect and flash it
so now you have a rom that can boot
hope it works
hit thanks if i helped you
and obviously do it aat yur own screen
response
prunzzz said:
since you are sOFF i dont think you can run RUU
so now do this,
1.open the RUU on PC (dont need to connect phone).Dont close the RUU window.
2.now on PC in Search, type %temp%
open the location
3.now there using search in that folder, search rom.zip
copy this .zip to c:/android
4.rename it to PG32IMG
5.nw put this PG32IMG.zip on phone
6.get int bootloader
7.it should automatically detect and flash it
so now you have a rom that can boot
hope it works
hit thanks if i helped you
and obviously do it aat yur own screen
Click to expand...
Click to collapse
I can run ruu but I doesnot fix my as card problem

Categories

Resources