Database Develop

USB/Charger reboot the phone, download mode lost, vibrant rom on i9000

OK guys I really badly need some help. My phone is in a non-workable state and I am starting to run out of options.
I did some mistakes but I will try to take out the details to list mostly the fact, hoping someone will take the time to give me directions.
- I have a galaxy s I9000 (switzerland/orange)
- I had upgraded to 2.2 via Kies.
- I got tired of the phone becoming increasingly slow. I found out about voodoo lag fix. I read 3000 forum posts, documentation and stuff, and when everything seemd easy enough, I installed voodoo via Odin.
- Here problems started. After installing voodoo, the phone booted, but the robot voice said "convert data partition. Not enough space on partition". Then again. And again. It was stuck in a boot loop. This problem doesn't seem to be documented anywhere i could find. The only instructions I could find on how to disable voodoo were to create some files on the disk, not very helpful when you can't boot the phone.
- I found a couple of threads with people who had the same message, and the advice their were given was to flash another rom.
- So I went to samfirmware.com and downloaded 2.2.1 for I9000 (JS8). I installed it through Odin. The phone booted, showed me the Galaxy S screen, then went black. Then it would vibrate every 20 seconds or so. Once, then 3 times in a row. I waited 30 minutes because in some places it said that may take long, but the situation didn't change. I rebooted, tried again after taking about the battery, wiped data, reset factory settings etc. The phone state wouldn't change, and I started to get a little desperate, because this was a stock rom, and if that didn't work...
- I read 3000 more threads, and phone a guy who had been in this situation, and got out of it by first installing "Eugene's JK2 froyo that never bricks" and then after wards reinstalling the stock rom.
- So I installed Eugene's rom. I knew it was trouble that it was a vibrant's rom, but I figured, I had read everywhere that as long as your phone supported download mode you could still always re-flash a new rom, so I decided give it a try.
- And the phone booted. Asked my pin, loaded stock android and all. I was happy at first, but then new trouble came. Now, whenever I plug in the USB, the phone's screen goes black after 4-5 seconds. When I unplug it, phone reboots. No charging battery appears when I plug the turned off phone on the charger.
- And worst of all, the buttons got mixed up. Vol up is vol down now. But more of a problem, 3 button recovery and 3 button download mode don't work anymore. I couldn't find a way to get them back. So I can't flash a new rom with Odin :-/.
- My latest was to install rom manager since I can access the market. I downloaded the tedgy rom. Installed the "clockwork recovery mode" from Rom Manager. It asked me if I had I9000 or vibrant, wasn't sure what it expected since I have now a vibrant rom on an I9000, but I put in I9000. Then I reboot telling rom manager to install Tedgy. I get a recovery mode screen which offers to reboot/reinstall packages/wipe data, then does a couple of operations, and finally gets stuck on :
can't open /cache/update.zip
(bad)
installation aborted
So there I go, with a vibrant rom on my I9000 (rooted, at least), a phone that can boot a half-functionnal android, but with a useless cable plug, an unchargeable battery, and a download mode I couldn't find... And waiting for my wife to get back with her phone so I can charge my battery again...
Any help or lead to help me get another rom installed on this phone again would be *greatly* appreciated. What other ways do I have to access download mode ? Or is there a way to get to it despite my buttons being messed up ? Maybe the rom manager issue can be fixed ?

OK well I got out of it somehow.
In case someone else had this same issue, here's how I got out of it :
1) Install ADB.
2) launch Odin
3) go to adb folder in command line and type "adb reboot download" but no enter just yet.
4) plug the usb cable on the phone.
5) type enter in the adb shell in the small window of opportunity you have before the screen goes blank. This reboots the download mode and allows new flashing via odin.

Any answer for this thread?
Did you fix the problem?
I'm stuck with the same case...

Flash gone wrong

Hi,
I've flashed multiple times before without an issue until today.
First, here's my background information:
Samsung Captivate (ATT)
Was running Continuum 5.4.1 but it felt laggy so I attempted to flash MIUI 1.5.13.
Here's what I did:
I wiped my phone using the Odin One click tool, then flashed CM7's kernel and then performed formats of the cache, system, and data, then installed MIUI RC2. After this step the phone should have restarted, then I planned to shut it down and reboot into recovery and flash 1.5.13 onto it.
My problem(s):
-Boot into recovery/download mode using key combinations is not working.
-The ADB console reports device not found when I try to run adb shell.
-The phone is undetected in Droidexplorer.
-When I attempt to download an app to boot to recovery with the phone says there is no space even though nothing has been installed other then MIUI.
What I would like to do:
Get back to stock with download/recovery modes working.
On a side note: MIUI works, but in a very limited way. I can navigate through it, but it won't allow the installation of applications due to there not being room on the phone (as said before).
Thanks!
Update - my phone was being identified as a Nexus S, so without those drivers my phone could not be debugged via USB. I now have the drivers and can perform ADB commands, however rebooting into recovery and into download mode both result in the phone restarting without going to the download or recovery mode.

Try using ODIN and repartitioning. I have good videos on standard ODIN and Heimdall on YouTube just search them. If you can not get out of this contact me, I have been able to partition debrick in the past and it's actually considered by me far more annoying than standard bootloader JTAG in certain situations. Let's hope yours is easier to bail out of!

First of all thanks for the reply and direction.
Secondly:
After working on this all last night I was able to get the phone recognized by Odin and my computer, now I am stuck at one of two screens depending on what I do.
If the phone is powered off then plugged in, the battery charging screen appears but there is no animation and after unplugging it the battery charging image remains.
If I power the phone on it hangs on the Samsung boot screen.
Repartitioning does sound like the proper direction for me to take, but, when I use Odin it freezes while setting up the connection to the phone.

when the phone is powered off try holding both vol keys and plugging in the cable. That could possibly get you to download mode. If not try vol down/pwr at the same time since you are now on GB bootloaders the keys are a bit different. Let me know what happens and good luck

maybe you should try to build a jig and use it to get into the download mode first. or you can buy it on ebay, just search for "micro usb jig".

I've tried every volume and power combination possible to no avail, I can't get into download mode. I've given in and am exchanging my phone. Thanks for the help anyway guys!

[Q]Can't flash a tot even in emergency download

Hey guys, I'm having an annoying problem here.
When I try to connect my phone to a computer, it just goes straight to charging, it doesn't even recognize on either end that a USB is connected to a computer. Now, sometimes I can force it to work, but that is like around 200 tries and it finally connects. I suspect it might be in test mode (but I'm not sure, I tried pressing # on the dialer to see if it pops up but nothing shows), so I've tried to follow the instructions to flash a .tot file by pressing power + volume up, unfortunately, the computer still doesn't recognize anything is connected, and neither does LGNPST. I have all the drivers properly installed (I was able to successfully downgrade to zv7/install gingervolt last week), and am out of ideas on how to get it to work. Any help would be appreciated.
So far I've tried about 6 different cables in four different USB ports to no success.

pow + vol down (hard reset) should work, phone has to be completely off. not even the charging animation. unplug from pc, pull and replace batt, put batt in then plug into usb then hard reset (hold until factory reset pops up) 10 secs or so
this has allways worked for me no matter how badly i messed up the phone.

Well, I tried your method of a hard reset and it still didn't work. Any other ideas? Is there any way to make the computer force to recognize the phone when its in emergency download mode?

I'm having a similar issue on a friend's phone
Edit: http://forum.xda-developers.com/showthread.php?t=1564941 I think this is the solution

I followed the instructions exactly, and LGNPST still isn't noticing anything and won't go into emergency mode......this is frustrating me....if I can just get this thing back to stock and lose cwm i can just take it to the store and get a new one.....
*EDIT* Well it randomly decided to connect to my computer again. The problem now is as soon as it goes into download mode(LGNPST is at around 11% complete and about to start on the Masterbin), it loses the connection to the computer and can't finish flashing the tot file....ugh..

Anyone have any ideas? I'm going crazy over here trying to figure out whats wrong. Every like 100th try, it will connect to the computer still, but if I try and run mt's revoallinone package it fails to unroot (says access is denied or folder not found), or try lgnpst it loses the usb connection the second it goes to that download screen.

Depending on what version your on or where your at as far as root stock etc this may or may not work i am at a loss, try this http://forum.xda-developers.com/showthread.php?t=1626198

Yeah I've tried that. On the occassion that the COM port reveals which port is the phone(usually on the 100th time of reconnecting the usb cord and successfully able to go into usb debug) I run that program, only for it to state that this is not a lg revo and auto close before I can get all the log data. Its frustrating...I only started to have this problem when I installed GingerVolt.....

Will adb recognize your device, because i had the same issue on a newer revo, you say your on gingervolt then you should be able to set up root acces and push cwm through adb then boot to cwm and flash sonething anything a recovery or do a wipe from there and i believe i saw a method in the forums for installing a stock os fron a zip. All depending on usb connection though

I have cwm already on there. I want it and the root off and back to stock, but I can never flash a tot and unfortunately I have no experience with adb, but I guess I'll google instructions to unroot via that and see if I can go back to stock via it as well.

[Q] Cannot Enter Recovery Mode

Hello All,
Hoping someone will be able to assist me, though I'm starting to lose hope.
I have spent all day so far reading threads, and trying various suggestions and fixes, but nothing has really helped and I'm beginning to think the phone may just be kaput.
Initial issue was nothing out of the ordinary; woke up to find the phone was not responding so pulled the battery. After putting the battery back in, the phone would no longer turn on. Uh oh. Did the obvious, repull the battery, try again. Nothing. Connect to charger (nothing happens, no charging icon on screen). At this point I think the battery has died so I bought a new one. No change, phone still won't turn on and nothing happens when I plug it in to charge.
So now I connect it to my PC, and I get the installing hardware message trying to install the APX stuff which fails. After some research, I manage to get the APX drivers installed such that the phone is detected when I plug it in. More research, decide to try the AOI Toolkit to backup everything first. This works ok.
So now I try and enter recovery mode via Power key + Volume Down key. Nothing. Ok, change the recovery image then. Device is not detected via ADB method. NVFlash method instead then. The bootloader loads fine, the screen wakes up and shows the S/W Download... message. I figure this is a hopeful sign. I try all 3 (ics-cwm-5, ics-cwm-6, twrp-2.5). They all flash successfully. However, I can't enter recovery mode with any of them. Once I disconnect the phone, insert the battery and then hold down the Power + Volume Down buttons, nothing ever happens.
I've also tried the LG Update Tool and the Smartflash options, but the phone is never detected.
As a last resort I repartitioned. This also worked ok, but still no recovery mode.
tl;dr
Phone won't turn on, show as charging, or enter recovery mode. Works when connected as APX with AOI Toolkit.
Am I missing something? Doing something wrong? Any assistance is greatly appreciated. Thx.

Bump

Okay, I'm bumping this thread myself (mostly because I'm an idiot and this could happen to me, too), but to give you my two cents: Have you tried the Full Brick Repair tool? You flash it through NVFlash and apparently "it cures any brick". Try it and tell us how it went.

NoDze said:
Okay, I'm bumping this thread myself (mostly because I'm an idiot and this could happen to me, too), but to give you my two cents: Have you tried the Full Brick Repair tool? You flash it through NVFlash and apparently "it cures any brick". Try it and tell us how it went.
Click to expand...
Click to collapse
Thanks for the suggestion. The flash process itself completed without issue, but still nothing once the battery is inserted and the power button is pressed. I'm going to assume there is some sort of hardware issue at this point and consider the phone officially dead. Now, where's my hammer...?

xda_fanboy said:
Thanks for the suggestion. The flash process itself completed without issue, but still nothing once the battery is inserted and the power button is pressed. I'm going to assume there is some sort of hardware issue at this point and consider the phone officially dead. Now, where's my hammer...?
Click to expand...
Click to collapse
Don't give up yet. Try smartflash and flash stock, or whatever. Seriously. Just keep on trying. I had a Samsung Captivate a year back and something similar happened where I woke up one beautiful morning, tried to unlock my phone: no response. I thought I had an SOD, so I pulled the battery out, reinserted: bootloop. Entered recovery, can't flash anything, unable to mount system/data partitions. Turns out my internal memory/ROM got fried. Yay. But until then, I tried every possible option. Wow, this turned out to be a bit depressing. Just try more stuff. After you've tried everything, and I mean everything, declare the phone dead.

I think i have a similar problem. Just woke up to find my phone to be dead. Tried the usual methods, nothing. Best it could do was from time to time show me a battery sign with a red triangle and a whtie exclamation mark in it. Then sometimes i manage to get into the recovery mode, there i tried practically everything. Used restore, it shows that restore was a success, but when i reboot my phone i get into an endless circle of bootloader icon appearing and dissappearing,
EDIT: somehow from the countless attempt it fired up.

Make sure to have the right bootloader before nvflashing unbrick roms....

xda_fanboy said:
Hello All,
Hoping someone will be able to assist me, though I'm starting to lose hope.
I have spent all day so far reading threads, and trying various suggestions and fixes, but nothing has really helped and I'm beginning to think the phone may just be kaput.
Initial issue was nothing out of the ordinary; woke up to find the phone was not responding so pulled the battery. After putting the battery back in, the phone would no longer turn on. Uh oh. Did the obvious, repull the battery, try again. Nothing. Connect to charger (nothing happens, no charging icon on screen). At this point I think the battery has died so I bought a new one. No change, phone still won't turn on and nothing happens when I plug it in to charge.
So now I connect it to my PC, and I get the installing hardware message trying to install the APX stuff which fails. After some research, I manage to get the APX drivers installed such that the phone is detected when I plug it in. More research, decide to try the AOI Toolkit to backup everything first. This works ok.
So now I try and enter recovery mode via Power key + Volume Down key. Nothing. Ok, change the recovery image then. Device is not detected via ADB method. NVFlash method instead then. The bootloader loads fine, the screen wakes up and shows the S/W Download... message. I figure this is a hopeful sign. I try all 3 (ics-cwm-5, ics-cwm-6, twrp-2.5). They all flash successfully. However, I can't enter recovery mode with any of them. Once I disconnect the phone, insert the battery and then hold down the Power + Volume Down buttons, nothing ever happens.
I've also tried the LG Update Tool and the Smartflash options, but the phone is never detected.
As a last resort I repartitioned. This also worked ok, but still no recovery mode.
tl;dr
Phone won't turn on, show as charging, or enter recovery mode. Works when connected as APX with AOI Toolkit.
Am I missing something? Doing something wrong? Any assistance is greatly appreciated. Thx.
Click to expand...
Click to collapse
Try to flash a new recovery image in apx mode.
And edit the /dev/block/mmcblk0p3 partition your self.
seek=6144 count=75 bs=1 / boot-recovery

Thanks for the added input and encouragement folks.
Just reporting an update:
Having been unsuccessful more times than I could count, I decided to physically disassemble the phone (normally Engineering fix #2, but performed out of order on this occasion). I have zero idea why it should have made a difference, as all I did was take it apart and then put it back together, but the phone has groaned back to life.
Of course, then sausage-fingers here managed to tear the digitizer cable when doing the final reassambly... /facepalm
Anyhow, I have a replacement on order, so I'm hopeful that when I receive that in a few days I'm back to a fully functional Optimus 2x!!

Is my phone hard bricked? h81120p

Recently I was running Prometheus custom rom, until it started actin funny, so I attempted to reflash cause the phone was getting slow over time. Tried reflashing but it didn't work. Tried other custom roms but each and every one of them kept saying * such n such isn't responding... System UI isn't responding, etc* unbearably slow, I no longer had landscape, sound, and the flashlight didn't work.
re-flashed the h81120N kdz with lg up tool, and the phone initially wouldn't even start, had to re flash 3 times before my phone said I had some upgrades... so it upgraded me to h81120p. Phone ran like a charm and I got all functionality back.
I attempted to at least re root h81120p, it initially worked then the next day I take phone off standby, and it turns off and wont boot past the LG logo screen. if it does the screen goes black. I put the phone in download mode and run lgup, and reflash with a stock h81120p kdz.. sh1t still doesnt work, tried again, sh1t still wont work. ' ventually, phone stopped staying in download mode, and when it does finally get there, LGup no longer recognizes its plugged in * please connect handset*. TF? computer only recognizes "Qualcomm HS-USb QDLoader etc.." under "ports"
Did some googling and was linked to LG flash tool and to a site on here for a .tot restore, which linked to some Vietnamese site I cant read, and one you have to pay premium vip in order to download the file, file seems to not exist anywhere else on the net.
so here I am... Phone barely stays in download mode, when in download mode, ( after multiple attempts of removing usb cable and battery, holding up on the phone while trying different combos of plugging in phone/ cable)LGUP doesnt recognize it, phone does not boot past the Lg logo , a factory reset does nothing.
first my laptop fails, now my phone is gone. wtf? can anyone help?