Database Develop

[Q] 2.3.3 base firmware ROM?

can anyone tell me which ROM uses 2.3.3 gingerbread firmware as a base firmware of any ROM in this forum?? i tried reading but had a hardtime figuring out which one of those uses a 2.3.3 firmware as a base of the ROM?
do the darky's rom uses 2.3.3 base firmware??

hi
just read OP of every rom in DEV forum it will tell you what that rom is built on
regards

Are you asking about which ROM is flashable through ODIN, so that you can install a custom ROM directly without the need of installing a stock base ROM?

timelessfahad said:
Are you asking about which ROM is flashable through ODIN, so that you can install a custom ROM directly without the need of installing a stock base ROM?
Click to expand...
Click to collapse
@ no point did he mention flashing thru odin
he's asking what roms are based on 2.3.3

thebazman said:
@ no point did he mention flashing thru odin
he's asking what roms are based on 2.3.3
Click to expand...
Click to collapse
Then I guess that I've misinterpret that. My bad!

timelessfahad said:
Then I guess that I've misinterpret that. My bad!
Click to expand...
Click to collapse
no problem

scapula101 said:
can anyone tell me which ROM uses 2.3.3 gingerbread firmware as a base firmware of any ROM in this forum?? i tried reading but had a hardtime figuring out which one of those uses a 2.3.3 firmware as a base of the ROM?
do the darky's rom uses 2.3.3 base firmware??
Click to expand...
Click to collapse
Recommended: Simply Honey...http://forum.xda-developers.com/showthread.php?t=1020720
SGS is flying. It is very close to stock rom. I tried Darky's rom RC5, but could not match with Simply Honey in quadrant score.

All the roms that have 2.3.3 or the word Gingerbread in the post heading are what you want .
jje

"1) Follow This guide to install GB Bootloaders: http://forum.xda-developers.com/show....php?t=1047924
2) Make sure you have first done a nandroid total backup and a backup of your apps with Titanium Backup
3) Install via Odin a Modded Kernel (like SpeedMod or Damian)
it says on the simply honey instruction that i have to install a kernel?? ahm, which kernel is that faster or the best kernel in your opinions? my phone is so i dont need to backup anything does it matter installing the rom?? what are bootloaders for? sorry for noob questions. im totally new on this phone. just making sure everything goes well to avoid bricking my phone.

there are too many ROM that use 2.3.3.....
example: JUWE(my favourite), simply honey, darky, MIUI n others........
just go to this link http://forum.xda-developers.com/forumdisplay.php?f=665

scapula101 said:
"1) Follow This guide to install GB Bootloaders: http://forum.xda-developers.com/show....php?t=1047924
2) Make sure you have first done a nandroid total backup and a backup of your apps with Titanium Backup
3) Install via Odin a Modded Kernel (like SpeedMod or Damian)
it says on the simply honey instruction that i have to install a kernel?? ahm, which kernel is that faster or the best kernel in your opinions? my phone is so i dont need to backup anything does it matter installing the rom?? what are bootloaders for? sorry for noob questions. im totally new on this phone. just making sure everything goes well to avoid bricking my phone.
Click to expand...
Click to collapse
I think the best kernel is DamianGTO Ultimate Ginger Kernel (Gold V2.0)......
go to this link http://forum.damiangto.org/viewtopic.php?f=7&t=27.........

[Q] returning to Stock

Hey guys! i have a i9000m galaxy s. Itts running darkys 9.5 ,darkcore 1.4 and JVE modem. I need to send it away but im not 100% sure on how to return this phone back to COMPLETE stock! any tips? thanks guys!

returning to stock
Hi, just grab the ROM from Samfirmwares.com (Froyo or GB) and flash it with Odin, ticking repartition (going into Download mode). I suggest you to get the JVH version as this is the one that will be released by Samsung these days. Then install ramads Deodexed ROM over it to get better performance. Now you have stock ROM. Anyways, I recommend you to flash Juwes ROM on top of it that is as stable as stock and just has another theme besides several improvements under the hood.

Link
There's the link to the firmware section:
http://www.samfirmware.com/WEBPROTECT-i9000.htm
You have to register to be able to download.
Grab I9000XWJVH ## CSC = I9000NEEJV3 (CSC for nordic countries).
Then unzip and flash according the guides here or at samfirmware.com

no no no dont flash gingerbread 2.3
it is not out officially yet, well for most of us it is not. unless kies says its available dont use it.
flash 2.2.1 froyo, this is available world wide and will stop the nasty men at samsung raising their eyebrows.

How to flash gingerbread rom over froyo rom

Hi there.
I'm running deodexed Froyo 2.2.1 right now from here http://forum.xda-developers.com/showthread.php?t=948790
I want to flash Gingerbread but I'm lost with bootloaders. The roms in there
http://forum.xda-developers.com/showthread.php?t=948790 does not have bootloader also Im not sure if I need one.
Could someone guide about the bootloader thing and how to flash deodexed gingerbread via odin.
Thanks!

C check out ezbase 3 rom, straight flash with odin 3 as per instructions, will give you rooted rom and im pretty sure its deodexed find it in development
Sent from my GT-I9000

Thanks!
But just to be clear: EZBase is a stock deodexed rom with bootloader in it?
Because I want to install the stock gingerbread (XXJVK probably) but I'm confused about the whole bootloader stuff.
Thanks again!

Read the ezbase thread, u can go for froyo or gb, just follow instructions, its all there with link to instructions with screen shots
Sent from my GT-I9000

hi to all some questions regarding the tab....

Just got the 16GB Tab a few days ago...
Well after scouring the forums for all sorts of info, the amount of research done on the Tab by you people is amazing ........ and still searching for more info day by day....
I wish to know which version of gingerbread is the "most stable one" ??
The asian ones which have been recently released ? Or the latest european firmware ?
Because I wish to run a stock samsung's own GB version before straightaway going in for a custom ROM like Overcome...
Also if I want the closest stock ROM based experience should I go for -
[ROM/Kernel][GSM][Android 2.3.3] ROM based DXJPE (build 23 June) by DiP7 ???
ANother newbish question will be -
If I flash a ROM and install the provided kernel with it ? Do I need to also flash a new modem file via ODIN ? or the original file stays there ?
And do I need OCLF after installing a stock/custom GB based ROM just for some speed improvements and/or does the EXT2 file system conversion give boost ? (because OCLF in my Galaxy S SL i9003 really did make overall performance better) Also the lagfix to be applied is V1+ right ? or do I also go for applying V2 lagfix in OCLF?
Thanks for reading all this and I would love to hear your ideas over these questions ....

No , no need to for the modem file after flashing rom.
I see you are in India ( me too ) so Asian rom will be better .
No need of lagfix and oc overcome is very smooth .
P.S :If you flash Asian GB please tell whether it contains Indian languages .

A good stock GB rom choice is JQ1 because it has the proper, safe bootloaders, and can be easily rooted using the Chainfire CF-Root v3.3 kernel.
From there you can go in any direction.

rangercaptain said:
A good stock GB rom choice is JQ1 because it has the proper, safe bootloaders, and can be easily rooted using the Chainfire CF-Root v3.3 kernel.
From there you can go in any direction.
Click to expand...
Click to collapse
Thanks a lot for the info..... and with that after CF-root can I do the lag fix ? or there's no need ?

adi6262 said:
No , no need to for the modem file after flashing rom.
I see you are in India ( me too ) so Asian rom will be better .
No need of lagfix and oc overcome is very smooth .
P.S :If you flash Asian GB please tell whether it contains Indian languages .
Click to expand...
Click to collapse
Thanks a lot... I'll go with JQ1 for now... then overcome GB version and then probably some asian firmware...

[Q] Rooting and Installing ROM on GT I9000

Hi,
I finally got a Samsung Galaxy S after finding a great a deal on it. I'm aware that there are several ways on how to root this device. However, due to that I don't know which to use.
Currently I'm running on 2.2.1 Froyo XXJPY with Kernel Version of [email protected] #1.
I'm not totally clueless about rooting as I've done it already on my HTC Wildfire.
Could someone please advise me which is the most up-to-date and safest method of rooting? Link would be greatly appreciated.
Also, I'm a bit confused about installing ROMs. I used to use CWM on my HTC Wildfire which was incredebly easy to do. Would it be the same on my Galaxy S?
I'm planning to test out MIUI, DarkysROM and such ROMs. Would these ROMs have the LAGFIX feature integrated in them as well?
I apologise if a thread like this has already been posted a thousand times but I just can't come up with a definite answer.
Thanks in advance.

I have a galaxy s Vibrant the I9000M and I rooted and unlocked mine today using SuperOneCick and then The Galaxy s unlock by helroz on the app market took a grand total of 6 minutes

Thank you! Now, that's one down.
Now just want to know about flashing ROMs e.g. MIUI, DarkyROM and such.
Do I need to root my SGS first to be able to flash custom ROMs?
I also noticed that you would also have to flash firwares and kernels. Do I need to this before flashing custom ROMs?
Thanks in advance.

In order to flash a custom rom you need to have clockworkmod (CWM) recovery.
and from that its easy
As for the newer rom's here, they are all 2.3.x, so in order to get from 2.2.1 JPY, you will need to flash a stock rom 2.3.x with bootloaders via Odin.
use this link to read about odin and flashing with it. its a great guide
http://forum.xda-developers.com/showthread.php?t=723596
to find stock rom's - they are in the general section. and custom rom's in the dev section.
read a little and after that have fun!!
And keep in mind every rom has its little guide, read those before you flash any.

Hi,
Many thanks for replying. Can I follow the video below made by a fellow XDA member direct from 2.2.1 to 2.3.4 via Odin?
http://www.youtube.com/watch?v=6lO3Y86N2p0&feature=BFa&list=FLqhM0qK4aVsLmWAA_YYhBCA&lf=mh_lolz
So I will Download stock JVQ from Samfirmware > Download Odin > Flash a stock 2.3.4 JVQ > Install chosen Kernel with CWM > Flash chosen ROM using CWM.
When would I need root then?
Is that right?
This reminds me when I had my Samsung Tocco. Pretty much same procedures.

Code Geass said:
Hi,
Many thanks for replying. Can I follow the video below made by a fellow XDA member direct from 2.2.1 to 2.3.4 via Odin?
http://www.youtube.com/watch?v=6lO3Y86N2p0&feature=BFa&list=FLqhM0qK4aVsLmWAA_YYhBCA&lf=mh_lolz
So I will Download stock JVQ from Samfirmware > Download Odin > Flash a stock 2.3.4 JVQ > Install chosen Kernel with CWM > Flash chosen ROM using CWM.
When would I need root then?
Is that right?
This reminds me when I had my Samsung Tocco. Pretty much same procedures.
Click to expand...
Click to collapse
That is right... basically when you flash a kernel with CWM you get root access. it's one of the features of a custom kernel. some of them activate it on there own and in some you need to activate it your self from the recovery (very simple).
And all the custom rom's come with root access, so in following the steps you wrote, you will get the root access with the custom kernel, and again in the custom rom.

Thanks for everyone's help. I'm now running Armetris 3.6.1 with Semaphore Kernel.
Just a question though, with my phone rooted, lagfix enabled, flashed with custom ROM and such, can I just simply go back to stock ROM? e.g. JVQ/JVR using Odin without any problems?

It is suggested to disable lagfix before changing rom's and kernel's
I know some how would say it is not a must when you use odin, but i always disable it before doing changes. I like to keep it safe.

sorry for this nooob question....
new to the samsung gt i9000, do i need to create a gold card before i do anything else????
sorry to be a bit thick but im used to htc

Hi,
Thanks for the reply. I'm currently running on Semaphore Kernel but I can't find any Lag Fix option on my phone? There isn't any on CWM Recovery as well.
I thought when you use EXT4 and convert it, Lag Fix would show up but I found nothing, so I just converted back to RFS.
So, I'm fine to directly go back to 2.3.4 JVQ even even I have a custom Kernel and custom ROM?
Thanks in advance!

Code Geass said:
Hi,
Thanks for the reply. I'm currently running on Semaphore Kernel but I can't find any Lag Fix option on my phone? There isn't any on CWM Recovery as well.
I thought when you use EXT4 and convert it, Lag Fix would show up but I found nothing, so I just converted back to RFS.
So, I'm fine to directly go back to 2.3.4 JVQ even even I have a custom Kernel and custom ROM?
Thanks in advance!
Click to expand...
Click to collapse
If you used the EXT4 app and converted to RFS then you have disabled the lagfix.
The lagfix changes the filesystem from RFS to EXT4. so when you converted to RFS yoh disabled it.
So,yes you are good to go.
---------- Post added at 02:57 PM ---------- Previous post was at 02:55 PM ----------
pat da punk said:
sorry for this nooob question....
new to the samsung gt i9000, do i need to create a gold card before i do anything else????
sorry to be a bit thick but im used to htc
Click to expand...
Click to collapse
Gold card?? what??

Also, If I were to flash a JVS Based ROM do I need to be on stock JVS and a JVS Kernel to flash it?
Once on I'm on JVS custom ROM can I just go back again to JVQ stock (Older firmware) without problems?
Really appreciate all your help Bork84!

Basically using odin you can change to JVS and JVQ no problem.
As far as custom rom, from what I know it does not matter on which 2.3.x you are, thay all have the same bootloders. so technically you dont need to be on stock JVS to flash a JVS custom rom.
but I am not an expert on that.
from my experience, i flashed to a JVR (2.3.4) custom rom via CWM from a 2.3.3 stock rom, and didn't had any problems.
So i cant give you a 100% answer