Database Develop

market canno't run after upgrade to 1.1.0 with

nookcolor 1.0.0 with official update to 1.0.1 then with autoroot, that enable android market, and run smoothly
after update to 1.1.0 use the following rom [ROM] Nook Color V1.1.0_r2, market won't run anymore, I tried to
use http://market.android.com to install new apps, but it doesn't work too. does anyone have the clue?
[ROM] Nook Color V1.1.0_r2
http://forum.xda-developers.com/showthread.php?t=932145
tried to restore to origianl 1.0.0 rom, but it boot to Clockwork Recovery everytime

what do you mean market wont run? if you are getting the server error message just wait eventually it will work. it seems like with the new market, google is changing settings on peoples accounts which will block your device from accessing the market. i had the same problem but the next day it was gone.
if you tried to put your nook back to stock and now its only booting into CWR go to the developers thread and they have multiple ways to recover your nook
here
and here

To restore to stock you need to remove the SD card and then press and hold the power button until it powers off and then press to turn on, wait until the N appears and press and hold power until it turns off and then repeat this process for like 8 times or so and it will then update the firmware to stock.

Im seeing the same thing.. Ver 1.1.0 and get the Market Server error everytime i try to launch the Market.

I updated to 1.1 and then booted with Autonooter 3.0 image. The Market works fine setup wizard was all I needed and all my apps are there. So, it's not definitely not the B&N 1.1 update causing the problem.

Also couldn't get the market to run after upgrading to 1.1.0
Press the icon and it would flash a white screen then back to the app folder. Youtube was doing this as well and I was able to fix it by removing and reinstalling, but I can't do this with the market apparently (just keeps running the install then saying market not installed)
I tried to make anflashable evrsion of the vending.qpk but it didn't even run because I have no clue how to make flashable packages for CWR.
Any ideas? Kinda sux not having the market
Sent from my Nookcolor using tapatalk.

fwdixon said:
Any ideas? Kinda sux not having the market
Click to expand...
Click to collapse
Don't use CWN and that ROM then (not that there's anything wrong with it).
Backup anything you don't want to lose by copying it your computer in any way you can / want.
Instead try going back to stock like described here...
http://www.nookdevs.com/Flash_back_to_clean_stock_ROM
Then update to 1.1 from official B&N update found here...
http://www.barnesandnoble.com/u/nookcolor-support-software-update/379002520/?cds2Pid=35758
Then boot with AutoNooter 3.0 from here...
http://forum.xda-developers.com/showthread.php?t=942424
Connect to WiFi and then just follow the setup wizard.
After that...run the market, agree to market terms and you're done!
FYI, I didn't have to use Youtube to get the Market to work. The Setup Wizard worked all on it's own.

Ok, let me rephrase. Any ideas on why I can't instal the market. Tips to get it reinstalled? I did this once on my phone and I had to remove all traces of the market first, hurt I can't remember where all the files and folders were located.
I like using CWR as it is what I am familiar with
Sent from my Nookcolor using tapatalk.

Market runs -but not well...?
Total newbie - seamlessly rooted NC 1.1 yesterday - (so grateful to developers!)
One of the only problems I have encountered is with Market -- I've searched and searched these forums to see if anyone else is having a similar problem -- but have yet to find anything.
I am able to access Market, and download apps with no problem. The only issue is when I view anything in the Market, it only shows roughly 10 results in any list I view. If I do a search, it may indicate that there are 754 results but will only list 10-12 of the results. Not a dealbreaker of course but if there's a work around, or fix, I'd love to know.
TIA

frillitup said:
Total newbie - seamlessly rooted NC 1.1 yesterday - (so grateful to developers!)
One of the only problems I have encountered is with Market -- I've searched and searched these forums to see if anyone else is having a similar problem -- but have yet to find anything.
I am able to access Market, and download apps with no problem. The only issue is when I view anything in the Market, it only shows roughly 10 results in any list I view. If I do a search, it may indicate that there are 754 results but will only list 10-12 of the results. Not a dealbreaker of course but if there's a work around, or fix, I'd love to know.
TIA
Click to expand...
Click to collapse
Use AppBrain app. You're on older android market.

Took the gapps zip from the Monster package and removed all files except the contents of META-INF and the vending.apk and flashed in CWR, market back .

frillitup said:
Total newbie - seamlessly rooted NC 1.1 yesterday - (so grateful to developers!)
One of the only problems I have encountered is with Market -- I've searched and searched these forums to see if anyone else is having a similar problem -- but have yet to find anything.
I am able to access Market, and download apps with no problem. The only issue is when I view anything in the Market, it only shows roughly 10 results in any list I view. If I do a search, it may indicate that there are 754 results but will only list 10-12 of the results. Not a dealbreaker of course but if there's a work around, or fix, I'd love to know.
TIA
Click to expand...
Click to collapse
Turn your NC to landscape.

[Q] Newbie Question - Root Nook with Default 1.0.1 or 1.1.0?

yeah im lost right now regarding nook, just got it yesterday, my version is 1.0.1
1) Do I upgrade to 1.1.0? And then use Auto-Nooter.
2) Or is 1.1.0 to new right now and just root 1.0.1 and then Auto-Nooter.
This is the link I'm going to follow unless someone has better suggestion/input.
http://nookdevs.com/NookColor_Rooting
Thanks

i'm actually wondering the same thing.

You can root any of the three versions. Just decision which and there are ways to do it. I'd recommended the monster root pack or autonooter. Both work well.
Sent from my nootered Nook Color.

So I guess my question is which is more stable/functional.
Do I just root at firmware 1.0.1? Is that the best option.
Or is there any advantage of upgrading to 1.1.0 and then rooting?

I am a newb too, I just downloaded the Auto-nooter-3.0.0.zip found elsewhere on this site. It roots 1.1.0 and I have to say it was as easy as anyone could ask for. I'd recommend just go ahead and update to 1.1.0 and then use this to auto-nooter your nook. Works like a charm. I should add that in previous versions ai have had issues getting set up with gmail and youtube, gmail worked but youtube always got borked for some reason... on this one, both are working fine, I have downloaded 2 apps already.
migrax

Which site did you use to download and follow instructions? can you post the link
thanks
migrax said:
I am a newb too, I just downloaded the Auto-nooter-3.0.0.zip found elsewhere on this site. It roots 1.1.0 and I have to say it was as easy as anyone could ask for. I'd recommend just go ahead and update to 1.1.0 and then use this to auto-nooter your nook. Works like a charm. I should add that in previous versions ai have had issues getting set up with gmail and youtube, gmail worked but youtube always got borked for some reason... on this one, both are working fine, I have downloaded 2 apps already.
migrax
Click to expand...
Click to collapse

http://forum.xda-developers.com/showthread.php?t=942424

Thanks for the help, so I got the process done at 1.1.0
My questions are:
1. When I install apps on the Market, I can open the app through the Download folder, but how do I get the icon on the Extras section?
2. What is the best method to configure the Soft Keys, any recommendations.
Thanks

joogle said:
Thanks for the help, so I got the process done at 1.1.0
My questions are:
1. When I install apps on the Market, I can open the app through the Download folder, but how do I get the icon on the Extras section?
2. What is the best method to configure the Soft Keys, any recommendations.
Thanks
Click to expand...
Click to collapse
Unfortunately I'm still too new to this site to post links, but if you go poke around in the nook color portal on nookdevs.com there are some great tips/instructions for configuring the softkeys software. I will say that I've found using a stand alone launcher (I use ADW EX) with softkeys is a great experience, and probably the most functional/useful.
Sent from my OC'd nootered NC using XDA App

joogle said:
When I install apps on the Market, I can open the app through the Download folder, but how do I get the icon on the Extras section?
Click to expand...
Click to collapse
Just restart system and all installed apps will show up in Extras... Have to do it everytime you install new apps

[Q] PlayOn and Newer Youtube

I just got my NC last night in the mail and got it rooted and pretty much how I want it. Just 2 questions.
1) PlayOn from MediaMall doesn't show up in the market but I copied it from my phone (Captivate) and it doesn't show up as a app and won't install. I copied it to /data/app, same location it was, on the Captivate.
2) When I first rooted the newer YT app worked and then I got the instant close, I got a version working but I wanted to see if there is a way to get the new one working again?
I have searched and didn't come up with much.
Thanks.
Edit: NM Playon requires 2.2 , I will leave the question about PlayOn here for reference if anyone else tried to install.
Edit: I found a thread that has a signed_youtube.apk.
I remembered that last night Search wasn't working, thats why I didn't find anything.

Youtube stopped working after a reboot! Seems like wipe data in TiBu worked after reboot, does this need to be done every time? Or does this have to do with accessing My Channel?

wgarrido said:
Youtube stopped working after a reboot! Seems like wipe data in TiBu worked after reboot, does this need to be done every time? Or does this have to do with accessing My Channel?
Click to expand...
Click to collapse
I don't Think that Question has ever been fully answered for the stock roms. All I know is that at some point the youtube app will stop working and you have to clear the cache. I doubt it will get fixed, people are far to interasted in getting the newer roms working. Once B&N creates a stock 2.2 rom maybe then the issues with go away.

wgarrido said:
I just got my NC last night in the mail and got it rooted and pretty much how I want it. Just 2 questions.
1) PlayOn from MediaMall doesn't show up in the market but I copied it from my phone (Captivate) and it doesn't show up as a app and won't install. I copied it to /data/app, same location it was, on the Captivate.
2) When I first rooted the newer YT app worked and then I got the instant close, I got a version working but I wanted to see if there is a way to get the new one working again?
I have searched and didn't come up with much.
Thanks.
Edit: NM Playon requires 2.2 , I will leave the question about PlayOn here for reference if anyone else tried to install.
Edit: I found a thread that has a signed_youtube.apk.
I remembered that last night Search wasn't working, thats why I didn't find anything.
Click to expand...
Click to collapse
You can get Froyo running off SD. Also most Apps won't work if you just push them to the Android Device. If you have adb working run "adb install appname.apk" otherwise go to Settings --> Apllication --> Unknown Sources then copy the APKs to the Internal Storage and then use Astro File Manager to Install them.
____________________________________________________
Sent from Nookie Froyo using Tapatalk

[How To] rooted B&N (1.3) with market access working .... no really.....it's working.

[How To] rooted B&N (1.3) with market access working .... no really.....it's working.
My goal - a rooted 1.3 stock device that had full market access back the way 1.2 worked w/ market prior to the update.
I'll preface this by saying I've tried nearly everything from almost every post in XDA in the last month, but I still had no market access and had to side-load all my apks. I get the feeling that there are quite a few of us that tried manulNooter and various forms of tweaks but are still w/out market access so it is for us that I write this.
I read this today and with a slight tweaking of the steps, I now have ROCK SOLID full market access on the first try.
I'll flat out say that all of the work can be chalked up to other people's time and effort, it's only the steps that worked for me I'm outlining here.
Beforehand:
Make sure you have a bootable CWM card (linky)
Make sure you have updates 4.6.18 and 4.6.16a.
Get the B&N 1.3 update here since you're going to revert your NC back to stock
START:
1) Before updating to 1.3 firmware you are required to do a complete wipe (which requires an aborted power-up [simply hold power button down during the launch process] 8 times in a row - or MUCH easier: the following command using adbWirless ).
adb shell
echo -n -e "\x08\x00\x00\x00" > /rom/devconf/BootCnt
reboot
Click to expand...
Click to collapse
2) I waited for the whole B&N setup after the wipe and I went through the steps of registering the device to my B&N account, then I did a factory reset at the "Erase and Deregister the device". It relaunches B&N one more time. After restarting I simply shut down the device before registering it again.
3) I then plugged in my Nook via. USB cable to my PC. I copied the 1.3 update to the root folder of the NC via. the USB cable. You can obtain the 1.3 update here if you didn't earlier.
4) I unplugged the USB. After 2 min. the NC recognized the update, and it did it automatically. It went through a full boot and I then shut down the NC.
5) I put in my CMW SD card with 4.6.18 and 4.6.16a on it. I then plugged in my USB cable into my Nook again to force the launch of CMW
6) In the CMW backup menu, I launched from zip file the 4.6.18, then right afterwards, the 4.6.16a nooters.
7) I shut down the NC, removed the CMW card, and did a regular launch.
8) I chose ZEAM launcher as default
9) I went into ROM manager and fixed permissions.
10) I went into the Market, signed in, and accepted the info, and saw the full, beautiful market populate and I'm good to go.
Hopefully this is a fix that works for everybody.....
(and yes - I know there's a separate thread on how to re-root after 1.3, but it's more of a troubleshooting thread at this point and frankly there's SO much conflicting info. in there I thought it prudent to start a new thread)

jnmoriginpoint said:
My goal - a rooted 1.3 stock device that had full market access back the way 1.2 worked w/ market prior to the update.
I'll preface this by saying I've tried nearly everything from almost every post in XDA in the last month, but I still had no market access and had to side-load all my apks. I get the feeling that there are quite a few of us that tried manulNooter and various forms of tweaks but are still w/out market access so it is for us that I write this.
I read this today and with a slight tweaking of the steps, I now have ROCK SOLID full market access on the first try.
I'll flat out say that all of the work can be chalked up to other people's time and effort, it's only the steps that worked for me I'm outlining here.
Beforehand:
Make sure you have a bootable CWM card (linky)
Make sure you have updates 4.6.18 and 4.6.16a.
Get the B&N 1.3 update here since you're going to revert your NC back to stock
START:
1) Before updating to 1.3 firmware you are required to do a complete wipe (which requires an aborted power-up [simply hold power button down during the launch process] 8 times in a row - or MUCH easier: the following command using adbWirless ).
2) I waited for the whole B&N setup after the wipe and I went through the steps of registering the device to my B&N account, then I did a factory reset at the "Erase and Deregister the device". It relaunches B&N one more time. After restarting I simply shut down the device before registering it again.
3) I then plugged in my Nook via. USB cable to my PC. I copied the 1.3 update to the root folder of the NC via. the USB cable. You can obtain the 1.3 update here if you didn't earlier.
4) I unplugged the USB. After 2 min. the NC recognized the update, and it did it automatically. It went through a full boot and I then shut down the NC.
5) I put in my CMW SD card with 4.6.18 and 4.6.16a on it. I then plugged in my USB cable into my Nook again to force the launch of CMW
6) In the CMW backup menu, I launched from zip file the 4.6.18, then right afterwards, the 4.6.16a nooters.
7) I shut down the NC, removed the CMW card, and did a regular launch.
8) I chose ZEAM launcher as default
9) I went into ROM manager and fixed permissions.
10) I went into the Market, signed in, and accepted the info, and saw the full, beautiful market populate and I'm good to go.
Hopefully this is a fix that works for everybody.....
(and yes - I know there's a separate thread on how to re-root after 1.3, but it's more of a troubleshooting thread at this point and frankly there's SO much conflicting info. in there I thought it prudent to start a new thread)
Click to expand...
Click to collapse
There is no 4.6.18 update - did you mean 4.518?????

Haven't tried this as I am using CM7 nightly builds ... but
Files that you need are here:
http://forum.xda-developers.com/showpost.php?p=17235819&postcount=1
Best regards,
-boggsie

docfreed said:
There is no 4.6.18 update - did you mean 4.518?????
Click to expand...
Click to collapse
Thks - yes - 4.5.18 - and fwiw, while I was super-happy about the progress - I turned off the NC last night and on launch this morning I'm stuck in a boot loop at the NC logo. Looks like I'm moving to CM7 and use the LCD density method to get market access. SO disappointing.

jnmoriginpoint said:
Thks - yes - 4.5.18 - and fwiw, while I was super-happy about the progress - I turned off the NC last night and on launch this morning I'm stuck in a boot loop at the NC logo. Looks like I'm moving to CM7 and use the LCD density method to get market access. SO disappointing.
Click to expand...
Click to collapse
Thanks for giving this a shot and posting your experience. I am hoping that one of the smart developer types will work on a Manualnooter (let's say 4.7.0) that will take us from stock 1.3 to root with a fully functional Market. Please, I know you are out there.
By the way, if you load CM7 with a -200 nightly or later then you will not need the LCD density fix as it has already been incorporated. Happy hunting!

jnmoriginpoint said:
Thks - yes - 4.5.18 - and fwiw, while I was super-happy about the progress - I turned off the NC last night and on launch this morning I'm stuck in a boot loop at the NC logo. Looks like I'm moving to CM7 and use the LCD density method to get market access. SO disappointing.
Click to expand...
Click to collapse
Did you update flash? Thats what causes the loop, I had the same thing happen to me and had to start again from scratch. Make sure you don't update flash through the market or this will happen again.

bobzdar said:
Did you update flash? Thats what causes the loop, I had the same thing happen to me and had to start again from scratch. Make sure you don't update flash through the market or this will happen again.
Click to expand...
Click to collapse
THANK YOU SWEET JESUS
I decided to revert to stock and every time I turned my nook off, there was no return. Every time I reflashed, after I nootered I updated everything from the market. I spent 2 hours trying to find the reason as to why I kept getting bootloops.
This fixed it.

turdferguson92 said:
THANK YOU SWEET JESUS
I decided to revert to stock and every time I turned my nook off, there was no return. Every time I reflashed, after I nootered I updated everything from the market. I spent 2 hours trying to find the reason as to why I kept getting bootloops.
This fixed it.
Click to expand...
Click to collapse
There is a fix to allow updated flash, can't remember which thread but after going through it I have updated to flash v11 without issue. I also got the (latest) market working by going into titanium backup and doing a data wipe of the market app.

Well, I followed all the given instructions, even bobzdar's method after reflashing for the 5th time. I still cannot get full market access. Even amazon market cuts me off. I've come to the conclusion that my only solution will be to move on to cm7. Honestly though, I prefer the stock rom over cm7.
All I want is cut the rope, and boat browser. Is that too much to ask for? lol

turdferguson92 said:
Well, I followed all the given instructions, even bobzdar's method after reflashing for the 5th time. I still cannot get full market access. Even amazon market cuts me off. I've come to the conclusion that my only solution will be to move on to cm7. Honestly though, I prefer the stock rom over cm7.
All I want is cut the rope, and boat browser. Is that too much to ask for? lol
Click to expand...
Click to collapse
For whatever reason, the market took a while to load the first time, but now it works whenever I go into it. Try opening it up and doing a search for something and see what happens. I did a search for flash after running the flash fix to go right to the updated v11 and it took 30 seconds to a minute for the search to go through, but once it did the market has worked normally since. It was odd, but what kicked the whole thing off was doing the data wipe in titanium backup and all of a sudden it auto updated flash and a few other things (indicating market was working), which necessitated doing the flash fix through CWM etc. Now everything is working properly, hopefully it's just working slowly like it was for me and you just have to kind of kick start it by doing a search.

Thanks for the detailed steps, and to bobzdar for his tips. I too was having the "Nook Col" problem even after having done the flash trick, so I started all over and all is working...
EXCEPT, now I can't download my B&N books. I get this error: "Unable to Download: Internal error: Exception executing the command".
I did update superuser among other things, not sure if that made any difference. It won't let me install the Nook app thru the Market, either.
Any suggestions? I'd like to read my books and would prefer NOT to do this all over again LOL.

zogg44 said:
Thanks for the detailed steps, and to bobzdar for his tips. I too was having the "Nook Col" problem even after having done the flash trick, so I started all over and all is working...
EXCEPT, now I can't download my B&N books. I get this error: "Unable to Download: Internal error: Exception executing the command".
I did update superuser among other things, not sure if that made any difference. It won't let me install the Nook app thru the Market, either.
Any suggestions? I'd like to read my books and would prefer NOT to do this all over again LOL.
Click to expand...
Click to collapse
New book or one already in your library? I just downloaded a book from my library without issue but I don't know if I've tried to download a new book since getting the market working again.

bobzdar said:
For whatever reason, the market took a while to load the first time, but now it works whenever I go into it. Try opening it up and doing a search for something and see what happens. I did a search for flash after running the flash fix to go right to the updated v11 and it took 30 seconds to a minute for the search to go through, but once it did the market has worked normally since. It was odd, but what kicked the whole thing off was doing the data wipe in titanium backup and all of a sudden it auto updated flash and a few other things (indicating market was working), which necessitated doing the flash fix through CWM etc. Now everything is working properly, hopefully it's just working slowly like it was for me and you just have to kind of kick start it by doing a search.
Click to expand...
Click to collapse
Well, evry time I did those steps, the market homepage/top apps or whatever seemed to show up blank, saying "No items found" or something like that.
I just decided to go back to 1.2. I like the new market better anyway.

bobzdar said:
New book or one already in your library? I just downloaded a book from my library without issue but I don't know if I've tried to download a new book since getting the market working again.
Click to expand...
Click to collapse
Already in the library. I have about 12 and can't dl any of them. Haven't tried to buy a new book yet, but I doubt that will work either.
It's frustrating because I was w/o the Nook for several days, did all this stuff and it works well other than this and limited market apps which I can live with.
I may have to go thru the whole process again and make sure I dl everything before I apply the hacks.

Market issue

I have 2 nooks, a nook color and a touch which both started having issues with the market sunday. Both worked Saturday and as far as I know there was no update. The color gives a server error and won't even connect. The touch is unable to download anything. This appears to only affect the market app. I can connect directly with a browser. Both have cm7. Anyone have any thoughts?
Tried restoring market & data.
Sent from my NookColor using xda premium

FloydF said:
I have 2 nooks, a nook color and a touch which both started having issues with the market sunday. Both worked Saturday and as far as I know there was no update. The color gives a server error and won't even connect. The touch is unable to download anything. This appears to only affect the market app. I can connect directly with a browser. Both have cm7. Anyone have any thoughts?
Tried restoring market & data.
Sent from my NookColor using xda premium
Click to expand...
Click to collapse
Have same issue on my Nook color yesterday.. WIFI is on, able to browse through browser, but when was trying to connect to marked it says "No Connection" RETRY. Are you able to resolve it?

Hey, y'all! I'm getting the same problem too, I just loaded CM7 to my NC and the market won't function. I even installed the Play Store from an apk and all that shows up is "Server Error" and a retry button. And, retrying gives the same screen. Help would be very much appreciated!

Has anyone been able to get the Market Place or Play Store to work properly? I've tried deleting the data and the cache for the new Play Store. I've gone back to an older verision of the Market Place...and I get the same "No Connection" Retry error.
I get into the Market and can look around without any problems. But when I try to access my apps, it fails. I'm not able to update any of my apps.

I have no problem with play store today and yesterday. I am running CM7 on uSD from dual CM7/CM9 image with 0305 update.

I resolved the market issue by restoring the last backup. I am not sure what happened but it looks like I lost a few things somewhere. I am having no problems with the new market either, and it also works with ics (on sd) for me.
Sent from my NookColor using xda premium

Yep im having same problem on my nook color with 7.2 kang build

I had this problem and followed a suggestion to sign in with @googlemail.com instead of @gmail.com. This worked for me but it was on a fresh install of 7.2.

i have a quick question. i tried looking for answers but i am lost at wht i need to do next.
i bought this nook for my wife back in march of 2011, when i got it i rooted it. the current version is 1.1.0. but the only thing i can see that is different from the original nook is the market. all i want to do is update the market because there are alot of apps that are not available as its an old version of the market. the app i am looking for is mbs digital direct. she needs this to be able to read some ebooks for class.
can someone please help me update the market so that it will be the most current one. thank you so much for your time.

I
dave4555 said:
i have a quick question. i tried looking for answers but i am lost at wht i need to do next.
i bought this nook for my wife back in march of 2011, when i got it i rooted it. the current version is 1.1.0. but the only thing i can see that is different from the original nook is the market. all i want to do is update the market because there are alot of apps that are not available as its an old version of the market. the app i am looking for is mbs digital direct. she needs this to be able to read some ebooks for class.
can someone please help me update the market so that it will be the most current one. thank you so much for your time.
Click to expand...
Click to collapse
I'm not sure the issue is the market app. 1.1 was an old version of android (eclair) and the mbs app may need froyo or higher before the market will allow it to be shown as available.
I recommend that you update your B&N software to the latest version (1.4.3) and root it again. Use Manual Nooter 5.08.20 to root it. It will then have the latest market (play store) and be updated to froyo. Look at my tips thread linked in my signature and look at item A15 to get the update. You can always make a nandroid backup of your system with CWM as it is now and if you don't like the new version, just restore your backup to return to rooted 1.1.
PS, the reviews that I saw for that app are terrible. You might want to check that out before making any changes.
EDIT: GMPOWER says it needs gingerbread so updating to 1.4.3 will not help. It is froyo and is one level down from gingerbread. I now recommend putting CM7 on an SD install. To do that, follow Taosaur's blog here:
http://taosaur.blogspot.com/2011/09/running-cyanogenmod-7-from-sd-nook.html

dave4555 said:
i have a quick question. i tried looking for answers but i am lost at wht i need to do next.
i bought this nook for my wife back in march of 2011, when i got it i rooted it. the current version is 1.1.0. but the only thing i can see that is different from the original nook is the market. all i want to do is update the market because there are alot of apps that are not available as its an old version of the market. the app i am looking for is mbs digital direct. she needs this to be able to read some ebooks for class.
can someone please help me update the market so that it will be the most current one. thank you so much for your time.
Click to expand...
Click to collapse
The app specifically says that it requires android version 2.3 (Gingerbread) and up. You will need to install CM7 over the stock firmware, or on the SD card, all of that information should be covered in "leapinlar's" tips page.