Hi, Thanks if your reading this and answering me i really can understand what to do so ill just ask so many stupid question and see if you know some of them. so First how do i know if i have a GSM / CDMA?. Next if i got either the two one what is the best way to optimize my Tab. in a certain way that i can root/flash/rom/hack or etc. and my main concern is that if i was to return all it back like a factory restore can it be done?.
So in anyway possible help me i bought my SGT in Philippines and we get like a Open Line SGT i can use all our Telcom providers and use Different Sim Cards so i really can't tell what to do first.
ap122289 said:
"First how do i know if i have a GSM / CDMA?.....
S...we get like a Open Line SGT i can use all our Telcom providers and use Different Sim Cards so i really can't tell what to do first.
Click to expand...
Click to collapse
You have the GSM Tab, I'm sure. CDMA is NOT very common in the Philippines, and you have a sim card slot, CDMA doesn't have this.
Also, unless your Tab was illegally imported from somewhere, you have the international version.
ap122289 said:
"what is the best way to optimize my Tab. in a certain way that i can root/flash/rom/hack or etc. and my main concern is that if i was to return all it back like a factory restore can it be done?.
Click to expand...
Click to collapse
I recommend you try out your stock ROM first, and read heavily on these forums. Know your Tab, current firmware, etc..
Once you've decided to play around your tab's ROM, then follow these guidelines. NOTE: It is possible that you will end up with a very expensive paperweight (brick) if you make a mistake somewhere along the way. Tread carefully.
First, enter *#1234# in your phone dialer to get your Tab's firmware.
2nd: backup your data (in Kies) and apps (in Titanium Backup)
3rd: Root your device using SuperOneClick (this voids your warranty)
SuperOneClick with instructions can be found here --> http://forum.xda-developers.com/showthread.php?t=803682
4th: Verify that your "bootloader" is not locked. Last few releases by Samsung locked the bootloader so flashing the firmware may damage or brick your Tab.
You can use Bootloader patch to check. It's here --> http://forum.xda-developers.com/showthread.php?t=888071&highlight=*#1234#
Again, read carefully and follow the directions..
5th: Finally, one of the best ROMs out there is Overcome. You will find all you need here. --> http://forum.xda-developers.com/showthread.php?t=932082
I suggest you print out the included instructions (in pdf). You will also find all the links to files that you need in this thread.
I cannot stress further the gravity of your decisions... .. Follow the steps carefully and faithfully..
6th: If something goes wrong (I hope not), please don't blame me.
Best of luck!
P.S.
I know my reply is a bit long (I've done my homework somewhat), but I'd love to get a small thank you by clicking on this button............................................... --V
.
Bro im form philippines also. If i were you i dont want to flash my tab. Im just going to wait the gingerbread 2.3. I heard kasi may or june this year....
Sent from my GT-P1000 using XDA App
@Sef_P1000
Thanks for the warning i kinda know Bricking and doing this to Galaxy Tab is Voiding your Warranty but i was so stupid i cant tell if i am using GSM but now for what you told me GSM is a Tab that use Sim and for using my Tab now its kinda great but i wanna maximize my Tab so i can do different things and for now ill just read and read but still going to wait for more things and before i do this i am going to enjoy my Tab. Already Sold my iPad and i kinda want to know if SGT 7" is already good or ill be buying the new SGT 8.9 and 10.1 so for now thank you very much and already reading some files but wish some Filipino already tried this but i think ill do just fine i can understand some part but still need to read first and will ask again if need help. BTW are you a Filipino or ???
I'm a Filipino too.
Voiding your warranty should be no problem since you can unroot your phone back. Moreover, I'm pretty sure that you got the GSM one since as Sef pointed out, it's pretty rare for us to use a CDMA device (partly thanks to our backwards and slow internet back home).
Moreover, to optimize your device, just try the ROMs out. You should read the guides how to flash them, of course, whether you wanna use Heimdall or Odin.
Pinoy ako! Hehehe.. (Im Filipino too! LOL)
I feel the same way now about flashing.. I am confident in doing it but am still doing heavy research. Take note that some roms do not have all the features of the stock rom, and they have bugs too.
Maybe in a month or so, I`ll flash this tab and then update this thread.
Sent from my GT-P1000 using XDA App
Okay Thanks ill be doing it too in a few weeks or months just need to double check some details and if i make it success full ill make a guide how i did mine. wish someone in phil can make a video or guide . i keep hearing that using mod ROMs rocks. but still lets see what happen.
hi bro. im also in the phils. ive got my tab from smart for two months, and i'd say im quite satisfied with the stock rom. with all the posts i read from various threads regarding problems in installing custom roms (the latest, also here, regarding overcome sucking the tab's batt), im not fully convinced to try it. my two cents: why fix something that is not broken?
ive had my sonyericsson xperia x8 also for quite sometime now, and flashing it is much less complicated than doing it in the tab. i simply cant risk bricking my tab!
also,a wk ago i had my tab repaired in samsung head office because of dim display. they replaced the lcd even if my tab is already rooted. so rooting i think doesnt make you lose your warranty! they even upgraded my firmware. love the new date, time and weather widgets.
i will just wait for the gingerbread upgrade this may!
vince_junior said:
hi bro. im also in the phils. ive got my tab from smart for two months, and i'd say im quite satisfied with the stock rom. with all the posts i read from various threads regarding problems in installing custom roms (the latest, also here, regarding overcome sucking the tab's batt), im not fully convinced to try it. my two cents: why fix something that is not broken?
ive had my sonyericsson xperia x8 also for quite sometime now, and flashing it is much less complicated than doing it in the tab. i simply cant risk bricking my tab!
also,a wk ago i had my tab repaired in samsung head office because of dim display. they replaced the lcd even if my tab is already rooted. so rooting i think doesnt make you lose your warranty! they even upgraded my firmware. love the new date, time and weather widgets.
i will just wait for the gingerbread upgrade this may!
Click to expand...
Click to collapse
May I ask the software version they upgraded your tab to?
prinzhernan said:
May I ask the software version they upgraded your tab to?
Click to expand...
Click to collapse
is this it?
build number: FROYO.DXKM3
kernel ver: 2.6.32.9 [email protected] #3
baseband ver: P1000DXKM1
so far, these are the changes i noticed:
1. new clock, date and weather widgets
2. "about phone" was replaced by "about device" in settings (or is it already like that before? lol)
3. alarm clock button made like the lock screen
4. Samsung Social Hub
just had a hard time rooting. z4root didnt work. had to try superoneclick v1.9 for a few times, but i succeeded on the fourth try.
vince_junior said:
is this it?
build number: FROYO.DXKM3
kernel ver: 2.6.32.9 [email protected] #3
baseband ver: P1000DXKM1
so far, these are the changes i noticed:
1. new clock, date and weather widgets
2. "about phone" was replaced by "about device" in settings (or is it already like that before? lol)
3. alarm clock button made like the lock screen
4. Samsung Social Hub
just had a hard time rooting. z4root didnt work. had to try superoneclick v1.9 for a few times, but i succeeded on the fourth try.
Click to expand...
Click to collapse
Wow yours is a new version mine was DXKM1. Until I switched to a custom rom.
Sent from my GT-P1000 using XDA Premium App
vince_junior said:
is this it?
build number: FROYO.DXKM3
kernel ver: 2.6.32.9 [email protected] #3
baseband ver: P1000DXKM1
so far, these are the changes i noticed:
1. new clock, date and weather widgets
2. "about phone" was replaced by "about device" in settings (or is it already like that before? lol)
3. alarm clock button made like the lock screen
4. Samsung Social Hub
just had a hard time rooting. z4root didnt work. had to try superoneclick v1.9 for a few times, but i succeeded on the fourth try.
Click to expand...
Click to collapse
i have KM3 on my tab too. though i find it weird that my kies tells me "This version of the device cannot be updated." is this happening to you as well?
noxxious said:
i have KM3 on my tab too. though i find it weird that my kies tells me "This version of the device cannot be updated." is this happening to you as well?
Click to expand...
Click to collapse
im finding it hard to use kies with the tab here in the office. i already tried two computers, one with xp and the the other with vista. kies in my windows xp laptop at home successfully detected my tab. ill try when i get home, and ill post after.
to my fellow users of sgt here in the philippines: what case are you using with your tab, and where did you get it? i cannot find the best case for sgt here in the philippines.
On my side. It detects my tab but says its version cannot be updated.
As for casing im using a rubber case
Sent from my GT-P1000 using Tapatalk
I'm using an official SGT case, hard case, leather outside, felt lining.
BW, I'm not in Pinas. I bought mine for about P 1,700.
noxxious said:
i have KM3 on my tab too. though i find it weird that my kies tells me "This version of the device cannot be updated." is this happening to you as well?
Click to expand...
Click to collapse
How were you able to update yours to KM3?
Sent from my GT-P1000 using XDA Premium App
Related
I have an indian galaxy s.
I got the device 2 days ago.
THE PHONE ROCKS AND IS AMAZINGLY FAST!!!
I love every aspect of it and now i want to root it.
The device is not simlocked, i bought it outright.
It is a non operator specific device.
My operator is vodafone india.
They provide 2.75G services based on 900 MHz and 1800 MHz digital GSM technology.
I have the folln. in *#1234#
PDA:I9000DDJF3
Phone:I9000DDJF3
CSC:I9000DDJF3
I want to know what method I can use to root the device because I read someone saying that you needed to be on some dutch fw to root the device.(If not can i root it like h tt p:// forum. xda-developers.com/showthread.php?t= 728754
Also I'd like to know whether I can install any of the custom roms like pauls modaco r2.
I dont mind using a prebaked ROM.
Is it possible to go to the I9000XWJFF or the I9000XWJG1 or will I have to stay on the I9000DDJF3?
Also on [htt p://samsung-firmware. webs. com /WEBPROTECT-samsungi9000.htm] samsung roms, there is no I9000DDJF3 ROM. So I don't think I can go back to I9000DDJF3 if I muck up anywhere.
Thanks a million in advance.
Sorry for the spaces in the urls.
Code:
1. To prevent spam to the forums, new users are not permitted to post outside links in their messages. All new user accounts will be verified by moderators before this restriction is removed.
Please forgive my newbishness as this is my first samsung android device and I am loving it all the way.
aditya_t90 said:
I have an indian galaxy s.
I got the device 2 days ago.
THE PHONE ROCKS AND IS AMAZINGLY FAST!!!
I love every aspect of it and now i want to root it.
The device is not simlocked, i bought it outright.
It is a non operator specific device.
My operator is vodafone india.
They provide 2.75G services based on 900 MHz and 1800 MHz digital GSM technology.
I have the folln. in *#1234#
PDA:I9000DDJF3
Phone:I9000DDJF3
CSC:I9000DDJF3
I want to know what method I can use to root the device because I read someone saying that you needed to be on some dutch fw to root the device.(If not can i root it like h tt p:// forum. xda-developers.com/showthread.php?t= 728754
Also I'd like to know whether I can install any of the custom roms like pauls modaco r2.
I dont mind using a prebaked ROM.
Is it possible to go to the I9000XWJFF or the I9000XWJG1 or will I have to stay on the I9000DDJF3?
Also on [htt p://samsung-firmware. webs. com /WEBPROTECT-samsungi9000.htm] samsung roms, there is no I9000DDJF3 ROM. So I don't think I can go back to I9000DDJF3 if I muck up anywhere.
Thanks a million in advance.
Sorry for the spaces in the urls.
Code:
1. To prevent spam to the forums, new users are not permitted to post outside links in their messages. All new user accounts will be verified by moderators before this restriction is removed.
Please forgive my newbishness as this is my first samsung android device and I am loving it all the way.
Click to expand...
Click to collapse
Hey!
You don't need any Dutch FW or anything. Just follow instructions given here and you're sorted.
You can upgrade to any firmware you want. Our (I'm from India too) stock firmware isn't available unfortunately. Personally, I'd go with JG5. Totally loving the firmware! Though you can flash to Paul's r2. You'll have to flash JG1 first and use the update over that. Also, you'd be automatically rooted if you flashed the r2.
It's pretty difficult to brick your phone honestly. If a flash doesn't work out right you can almost always just enter the download mode and re-flash. I've had issues myself, but nothing to fret about really.
http://forum.xda-developers.com/showthread.php?t=728754
Follow this tutorial! it will work for your firmware and software!
varunrai said:
Hey!
You don't need any Dutch FW or anything. Just follow here and you're sorted.
You can upgrade to any firmware you want. Our (I'm from India too) stock firmware isn't available unfortunately. Personally, I'd go with JG5. Totally loving the firmware! Though you can flash to Paul's r2. You'll have to flash JG1 first and use the update over that. Also, you'd be automatically rooted if you flashed the r2.
It's pretty difficult to brick your phone honestly. If a flash doesn't work out right you can almost always just enter the download mode and re-flash. I've had issues myself, but nothing to fret about really.
Click to expand...
Click to collapse
Thanks a lot. Really good to know there are other Indian samsung Galaxy S users here on xda. I will root by the method you gave me and I will try the jg5 after a few days.
Btw what part of India are from?
Mumbai here
Thanks again
Sent from my GT-I9000 using XDA App
I'm an Indian user too (Bangalore). Bought my SGS almost 2 weeks ago. Was VERY annoyed with the stock firmware (DDJF3). The black-outs really got on my nerve. Will you not be irritated if your 30k phone hangs up on you for several seconds (to open the dialer app so you can type the number down) right when the pretty girl you're talking to offers to give you her phone number, and you have to ask her to wait 5 seconds to write it down?! Of course, the black-outs aren't there all the time. Usually only when you use the phone after a long gap (at least in my case). But it's still VERY annoying. That's NOT what I paid 30k for!
So yeah, finally flashed to JG5 a few days ago. Very happy with it. Although I can still see the black screens, it's always for ~1 second max and it only happens with some apps. Dialer and Contacts don't lag at all anymore. I really think you're gonna love your phone even more if you upgrade your firmware to JG5
Use mimocans lagfix from the sticky if you have a micro sd and way the lag gone.
Sent from my GT-I9000 using XDA App
Thank a ton everyone
Darkstriker
ed10000
BackfireNL
varunrai
I will try all this tonight.
Mods can close the thread if they want to.
Thanks everyone again.
I am also from India (Delhi), and currently running rooted JG5 firmware with the sdcard lag fix
I am Hyderabad & i am on jg5 rooted with sd lag fix. Great phone now.
Only thing i am missing after sd card fix is the default ringtones & notifications. Othrwise loving it.
I have recovered from a bricked state about 10 days ago so follow the steps correctly.
Sent from my GT-I9000 using XDA App
ed10000 said:
I'm an Indian user too (Bangalore). Bought my SGS almost 2 weeks ago. Was VERY annoyed with the stock firmware (DDJF3). The black-outs really got on my nerve. Will you not be irritated if your 30k phone hangs up on you for several seconds (to open the dialer app so you can type the number down) right when the pretty girl you're talking to offers to give you her phone number, and you have to ask her to wait 5 seconds to write it down?! Of course, the black-outs aren't there all the time. Usually only when you use the phone after a long gap (at least in my case). But it's still VERY annoying. That's NOT what I paid 30k for!
So yeah, finally flashed to JG5 a few days ago. Very happy with it. Although I can still see the black screens, it's always for ~1 second max and it only happens with some apps. Dialer and Contacts don't lag at all anymore. I really think you're gonna love your phone even more if you upgrade your firmware to JG5
Click to expand...
Click to collapse
Hi ed10000 ...i bought galaxy s two days back , it has i9000ddjf3 firmware n facing d same issue of black screen for 5-10 sec, while launching contact , phone call or other apps... i want to flash it with JG5 , would u plz tell me full version of JG5(i9000_ _ JG5) and you used and d link where from u downloaded this firmware , you flashed it with all three file (PDA , Phone , CSC ) or only with PDA . i m using Airtel connection ...may i get any problem regarding connectivity after flashing ?
Thanks a lot in advance for your reply n help ..
Hey guys got my galaxy s from mumbai (irla, andheri). Using from past 2 weeks and this phone rocks.
Guys dont go with jg5, iam on jm2 and it rocks. Rooted with update.zip method and used root explorer to remove unwanted apps and media. This baby rocks. Loving the built in task manager and asphalt 5 is cool.
I have tried samset custom rom when i was on jg5 but i didnt get any performance boost. Iam really happy with the jm2 and waiting for the promised froyo update in the month of august or september.
Abhaysharma said:
Hi ed10000 ...i bought galaxy s two days back , it has i9000ddjf3 firmware n facing d same issue of black screen for 5-10 sec, while launching contact , phone call or other apps... i want to flash it with JG5 , would u plz tell me full version of JG5(i9000_ _ JG5) and you used and d link where from u downloaded this firmware , you flashed it with all three file (PDA , Phone , CSC ) or only with PDA . i m using Airtel connection ...may i get any problem regarding connectivity after flashing ?
Thanks a lot in advance for your reply n help ..
Click to expand...
Click to collapse
go here
http://forum.xda-developers.com/showthread.php?t=724251Z
Abhaysharma said:
Hi ed10000 ...i bought galaxy s two days back , it has i9000ddjf3 firmware n facing d same issue of black screen for 5-10 sec, while launching contact , phone call or other apps... i want to flash it with JG5 , would u plz tell me full version of JG5(i9000_ _ JG5) and you used and d link where from u downloaded this firmware , you flashed it with all three file (PDA , Phone , CSC ) or only with PDA . i m using Airtel connection ...may i get any problem regarding connectivity after flashing ?
Thanks a lot in advance for your reply n help ..
Click to expand...
Click to collapse
Hi Abhay,
It is I9000XWJG5. You can download it here. Use the 512 pit which can be found here. I used all 3 files to flash (PDA = CODE, PHONE = MODEM, CSC = CSC). I did it with the re-partition option enabled. I'm using Airtel too, and before flashing the new firmware, I used an app called "APN Backup & Restore" which can be found on the Market to backup my APN settings. Then after flashing JG5, install the same app again and restore the settings. No issues regarding connectivity after that .
Also, I've seen many people report lag in JM2, so I'm still on JG5 and will probably use the same until the next official firmware release. It's just stable and works the way one would expect it to.
BTW, a simple but a very effective tip - once you open the Phone app or the Contacts app, don't use the back button to close it. Use the Home button. I've found that it opens in an instant the next time you use it if you follow this. Same applies for all apps (like Messaging, Music Player etc.).
Good luck! Let us know how it goes
Great to see i9000 gaining ground @ localhost
I am due to buy my i9000 this weekend - hxxp://bit.ly/why-i9000
)
I bought a Galaxy S last saturday. I tried the JP1 and JP2 Froyo builds but flashed back to JM2 as it was more stabler.
vinodis said:
I bought a Galaxy S last saturday.
Click to expand...
Click to collapse
How much you paid for the device? best I could get was INR 27,500 in New Delhi
28K in Bangalore.
Sorry, this might seem offtopic - Chroma Retail chain users can get an additional discount from hxxp://bit.ly/b3XzIH
I bought my SGS 2 weeks back and OMFG it rocks. I can usually be found rocking it in the office elevator and when people ask about it I act all annoyed
Anyway, I rooted the phone and have taken a Titanium backup. I plan to flash JG5 and do the lagfix, but will Titanium restor ALL my apps and settings? I have spent of a lot of time customizing this baby (I would highly recommend the paid version of LauncherPro Plus) and don't want to lose all that hard work.
Also, once I apply the lagfix, will it be a problem flashing future FW's?
Thanks!
EDIT: Bought it from Mumbai for 28K
EDIT2: Is it possible to partition my sd card from within my phone? My linux does not recognize my laptop's card reader and I don't know of any way in Windows7
Yes. It is possible to partition without resorting to Computer. Search the internet for 'sdparted'. But that script will not help you create EXT3/EXT4. Works only with EXT2 and FAT32 etc. I guess it may support EXT3/4 partition resize though.
Hello all,
I've been reading and downloading from xda for over a year now (sgs- darky's rom mainly), and this is my FIRST POST!
I know i can find my answer just by looking but i really wanted to post for the first time so here's my question- My tab is in the post (got it from ebay as i'm a pauper and can't afford it new, or the 8.9 or 10.1) and obviously want to root it straight away. I've seen that some are using z4 root but my sgs won't accept this method, can i be sure it'll work?
take care fellow "tabbers"
PS the doorbell just rang and it's here! *wets pants and logs off*
What firmware version is it on? Please post complete information from *#1234#
until we know that we cannot advice you.....
bongski55 said:
What firmware version is it on? Please post complete information from *#1234#
until we know that we cannot advice you.....
Click to expand...
Click to collapse
it's 2.2 froyo build number FROYO.XWJJ7
baseband P1000XXJK5
KERNEL 2.6.32.9 [email protected] #1
PDA- P1000XWJJ7
PHONE- P1000XXJK5
CSC- P1000CPWJJ5
I need to get gingerbread (at least) on this thing straight away! Or any cool roms you can recommend?
How do i find out if it's GSM or CDMA? i'm in the UK... That is probably a really stupid question, but i'm a stupid guy... A stupid guy who loves android and wants to learn more!
Any links to the right places would be really appreciated
First you're not stupid. You're just new and learning.
Second your tab judging by its firmware is gsm european tab.
Third you can root using superoneclick root.
Fourth. Head to the development section and you will find alot of great roms (or click on my sig if you're interested in overcome). JUST BE SURE TO READ ENTIRE GUIDES AND STUDY THEM BEFORE FLASHING ANYTHING.
DarkPal said:
JUST BE SURE TO READ ENTIRE GUIDES AND STUDY THEM BEFORE FLASHING ANYTHING.
Click to expand...
Click to collapse
+100000000000000 (I'd keep my finger depressed on the 0 key longer, but you get the point)
So many people get themselves into trouble by not reading instructions or skipping ahead.
Easy to get yourself into trouble, can be VERY hard getting out...
Thank you for all the help, most kind I'm at work now so will try some bits tomorrow, managed to get rooted before leaving tho
Sent from my GT-P1000 using XDA App
Your tab is rooted already. Look at the kernal version. In your apps you will see something called Superuser. Tap it. If its there and opens you are rooted.
rangercaptain said:
Your tab is rooted already. Look at the kernal version. In your apps you will see something called Superuser. Tap it. If its there and opens you are rooted.
Click to expand...
Click to collapse
That's what really confused me, the kernel said root on it, but no super user was there and none of my purchased root apps could aquire root.... so I used super one click as advised and hey presto! Still confused as to why it said that on my kernel tho...
Sent from my GT-P1000 using XDA App
Someone tried to return the tab to stock. The busybox was probably there too. Anyway, you are good now. What's next?
Resolve the signed bootloader with chainfire patch
Sent from my GT-P1000 using Tapatalk
Thanks all, I installed the overcome gold rom last night and all is well
Just out of interest as i'm un-learned, how can you tell if the bootloader is signed? (As far as I can tell) it hasn't affected the rom installation... could it?
Thanks all for the support!
Sent from my GT-P1000 using XDA App
locked bootloader? read here
http://forum.xda-developers.com/showthread.php?t=888071
but can't find an answer.... is it doable? Also, what other mods can I do to it? I wish XDA had a section for each version of the tab, I have a huge headache from trying to find my answer.... thanks guys
bump..... Please guys, help me out. I tried rooting last night but failed, guess I tried the root from a different tab... so please help me out... I'm getting ready to smash this thing
Really, no one can help me out? ... maybe another forum has more courteous members.
Sent from my MB860 using XDA Premium App
Do you think that bumping your post two hours after posting it is courteous?
I just got a Galaxy Tab WiFi myself, but I did my research *before* I bought it. No Gingerbread is available, that I know of. There are not many alternative ROMs for the WiFi only model.
What did you use in your rooting attempt? The only two ways I know are with a Windows app or with z4root, an Android app. I haven't tried either one, here is a link to z4root on this forum.
http://forum.xda-developers.com/showthread.php?t=833953
I installed GB 2.3.3 using this thread
http://forum.xda-developers.com/showthread.php?t=1083971
hope that helps
SuperOneClick should be able to help you root your Tab.
Here's the Noob Rooting Guide with links and downloads.
Always do your research. The Development forums will be one of your best resources for your Tab.
BUGBEAR_X said:
I installed GB 2.3.3 using this thread
http://forum.xda-developers.com/showthread.php?t=1083971
hope that helps
Click to expand...
Click to collapse
That's for the 1000 not 1010 which is the wifi only model, thank you though.
Sent from my MB860 using XDA Premium App
brucemcl said:
Do you think that bumping your post two hours after posting it is courteous?
I just got a Galaxy Tab WiFi myself, but I did my research *before* I bought it. No Gingerbread is available, that I know of. There are not many alternative ROMs for the WiFi only model.
What did you use in your rooting attempt? The only two ways I know are with a Windows app or with z4root, an Android app. I haven't tried either one, here is a link to z4root on this forum.
http://forum.xda-developers.com/showthread.php?t=833953
Click to expand...
Click to collapse
No offense but if you're going to criticize you might as well not even comment to avoid any frustrations or arguments as a result. Thank you for the link, I was able to find z4 and lag fix yesterday.... applied both but i might roll back on the lag fix since I have no haptic feedback now unless anyone knows of a fix? I wasn't able to find anything on Google... wifi only tab and p1010 aren't too popular searches.
Sent from my MB860 using XDA Premium App
*sigh* waiting for this too..
****ty Samsung , is it so hard to just make an official Gb for this little tab considering the workforce they have at their disposal.
At one point I had heard that the Sprint stock GB (2.3.4) update worked on the Wifi only tabs, but I don't have a wifi only to test with.
I haven't heard of any alternative roms for the wifi only version.
Sent from my SCH-I800 using Tapatalk
Check with Kies, see if you have a firmware update. I only have a P1000, but maybe it's similar.
oh yeah, give time for people to reply your thread. Don't be a spoiled kid.
Sent from my Galaxy Tab P-1000 using Tapatalk
EDIT: from other answers here the Sprint GB 2.3.4 ROM stock or rooted sounds the way to go, so it looks like this should work for you as it did for me on my Verizon CDMA tab.
It's hard to say for sure, experimentation is part of the fun, but killing the tab isn't. I didn't find any definitive answers on flashing a Sprint CDMA ROM on to a Verizon CDMA Galaxy Tab (for example), so I decided to try for myself:
http://forum.xda-developers.com/showthread.php?t=1255339
I suspect doing a FULL ROM flash would be a *very* bad idea (it seems doing that with a GSM ROM on other (non-GSM) tabs KILLS it). However, the technique I used was only to apply the kernel and filesystems, so I would *think* if you had a backup from before (always best to have a backup anyway, right?) you could always revert. You may want to look around and check to see if stock WIFI images are out there (I don't know for sure) but the Voodoo or CwM (ClockworkMod) recovery backups should be fine either way.
Then if you apply the filesystem and kernel files from 2.3.4 and they don't work you should be able to revert (I would assume, I can certainly flash back and forth on mine). I would *think* the kernel supports vanilla hardware + CDMA additionally (i.e. you don't need it, but it doesn't hurt), but may be fine.
But again, unless you're prepared to take the risk, I cannot say for sure, you can wait and see if anyone else chimes in, but that's my take.
pvtjoker42 said:
At one point I had heard that the Sprint stock GB (2.3.4) update worked on the Wifi only tabs, but I don't have a wifi only to test with.
Click to expand...
Click to collapse
I don't feel like bricking mine to find out lol
Sent from my MB860 using XDA Premium App
loserbaby said:
EDIT: from other answers here the Sprint GB 2.3.4 ROM stock or rooted sounds the way to go, so it looks like this should work for you as it did for me on my Verizon CDMA tab.
It's hard to say for sure, experimentation is part of the fun, but killing the tab isn't. I didn't find any definitive answers on flashing a Sprint CDMA ROM on to a Verizon CDMA Galaxy Tab (for example), so I decided to try for myself:
http://forum.xda-developers.com/showthread.php?t=1255339
I suspect doing a FULL ROM flash would be a *very* bad idea (it seems doing that with a GSM ROM on other (non-GSM) tabs KILLS it). However, the technique I used was only to apply the kernel and filesystems, so I would *think* if you had a backup from before (always best to have a backup anyway, right?) you could always revert. You may want to look around and check to see if stock WIFI images are out there (I don't know for sure) but the Voodoo or CwM (ClockworkMod) recovery backups should be fine either way.
Then if you apply the filesystem and kernel files from 2.3.4 and they don't work you should be able to revert (I would assume, I can certainly flash back and forth on mine). I would *think* the kernel supports vanilla hardware + CDMA additionally (i.e. you don't need it, but it doesn't hurt), but may be fine.
But again, unless you're prepared to take the risk, I cannot say for sure, you can wait and see if anyone else chimes in, but that's my take.
Click to expand...
Click to collapse
Lol thanks... I guess if someone has the time and patience to try it and it works then please let the rest of us p1010 owners know
Sent from my MB860 using XDA Premium App
I have the P1010 also and from what I've heard, the two models (P1010 and P1000) have different hardware which makes the latter model possible for the ginger update while ours likely will never get it.
Enjoy it for what it is. That's all I can say.
jstrayy said:
No offense but if you're going to criticize you might as well not even comment to avoid any frustrations or arguments as a result.
Click to expand...
Click to collapse
No offence but you are the one who was rude by bumping your topic after 2 hours and also accusing people who didnt answer as not courteous, so obviously you are going to get criticism.
Your problem is that you cant be bothered to go read or search and expect people to jump on your topic and bring all the info to you. This is XDA-developers, not tech support, try and at least help yourself first before demanding answers.
If anyone tests the spring gingerbread method and it works, please say so. xD Im too much of a coward to risk my tab.
OmniLemur said:
If anyone tests the spring gingerbread method and it works, please say so. xD Im too much of a coward to risk my tab.
Click to expand...
Click to collapse
You can save a flashable ROM in the sdcard. Then if the tab got bricked, you can insert the sdcard in and reflash again. But i don't recommend doing this because me myself never flashed my tab, only my nexus one.
Hey guys I just bought a sprint galaxy tab of craigslist today in perfect condition but it is rooted and its on froyo 2.2. Im getting really confused in what sections and all and thread to find a unroot method. Im fine with rooting my phone but this is my first tablet and I want it updated to GB but when I go to the settings it says its updated
Which model you got?
Why do you want to UNroot?
Just go to Overcome thread, download guide/roms, flash your device and will have GB.
Then if you wish you can flash CM9 and have ICS/Tablet optimized OS.
TheATHEiST said:
Which model you got?
Why do you want to UNroot?
Just go to Overcome thread, download guide/roms, flash your device and will have GB.
Then if you wish you can flash CM9 and have ICS/Tablet optimized OS.
Click to expand...
Click to collapse
I got SPH-P100 DJ30. I want to unroot to get the OTA since im on 2.2. Flashing a rom will work to, a stock rom which you are able to get a OTA. I just got it and not sure if it has CWM on it or not. Im not real fimilar with Samsung rooting techniques as most of my phones have been HTC. I have a stock rom downloaded ready to go, the only thing is im not at home and our wifi is out so im at a friends house and need to get to odin to flash the rom. I have odin on my computer at home as I have done it before, but im going brain dead and cant for the life of me figure out the site or download wise how to get the odin root program
removed
Edit: sorry, missed the CDMA part, please don't use my earlier info, as this is GSM only!
Verstuurd van mijn GT-P1000 met Tapatalk
Eric1985 said:
Hey guys I just bought a sprint galaxy tab of craigslist today in perfect condition but it is rooted and its on froyo 2.2. Im getting really confused in what sections and all and thread to find a unroot method. Im fine with rooting my phone but this is my first tablet and I want it updated to GB but when I go to the settings it says its updated
Click to expand...
Click to collapse
DO NOT install OVERCOME rom or ICS for P1000. You will break yout G-tab!!!
You own a CDMA. and the above instructions are all for GSM. I hope I am not too late.
No not to late. Thanks guys. Im just using it for wifi so I don't need the free wireless tether one of the things with rooting. I just wanna get off this old 2.2 and just found the galaxy tab series kinda confusing. I did my epic touch fine, but with Verizona and Sprints, only wifi versions all of it is getting me frustrated ha but thanks again guys
Sent from my EVO using xda app-developers app
Didn't want to leave it like this... Perhaps this can help you, but please make very sure that this is exactly the same version:
www thegalaxytabforum com /index.php? /topic /4653-sprint-tab-soft-bricked/ page__st__20
Looks like a solution, but perhaps you've already seen this... Please note that you have to insert the dots and remove the spaces on the above link.
Good luck
Verstuurd van mijn GT-P1000 met Tapatalk
KasSGT said:
Didn't want to leave it like this... Perhaps this can help you, but please make very sure that this is exactly the same version:
www thegalaxytabforum com /index.php? /topic /4653-sprint-tab-soft-bricked/ page__st__20
Looks like a solution, but perhaps you've already seen this... Please note that you have to insert the dots and remove the spaces on the above link.
Good luck
Verstuurd van mijn GT-P1000 met Tapatalk
Click to expand...
Click to collapse
if what you want is to get rid of froyo, why don't you try to flash this GB2.3.4 rooted for sprint. You need to learn how to use odin though.
http://forum.xda-developers.com/showthread.php?t=1161033
or take a look at this:
http://forum.xda-developers.com/showthread.php?t=1341666
follow the instructions carefully, and DO NOT do this if you are not ready to break your tab.
Ya I have used Odin before for my S2. My tab is working just fine, but it's just the OS is older and some apps wont work on it. And to top things off we changed internet companys so it won't be till Friday unless we head to my parents to use their internet. But when I connect my tablet to the computer earlier I had Odin up, should it have recognized what was plugged in and in the header should it have said the tablet information? It still had EL29 from my S2 a few months ago when I had it and rooted it but nothing changed.
Sent from my EVO using xda app-developers app
Eric1985 said:
Ya I have used Odin before for my S2. My tab is working just fine, but it's just the OS is older and some apps wont work on it. And to top things off we changed internet companys so it won't be till Friday unless we head to my parents to use their internet. But when I connect my tablet to the computer earlier I had Odin up, should it have recognized what was plugged in and in the header should it have said the tablet information? It still had EL29 from my S2 a few months ago when I had it and rooted it but nothing changed.
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
THat's strange but should be ok. I think you have odin 1.7 instead of 1.83.
Odin may not recognize your tab if you did not check "USB Debugging" mode.
It should recognize your tab as an android device right away if you already check USB Debugging mode.
But if you follow the second link, it will unroot your tab back to 2.2 unrooted stock -- using heimdell.
Good evening all,
My Christmas present to myself arrived a bit early. Its a used Galaxy Tab 1000!!
It is running the Froyo 2.2 and when it boots up at some point it displays "Orange". I put my own sim (not Orange) first it says you cannot use your sim card, then i went to settings and enabled voice and it seems to be working.
Ideally i would like to install MIUI onto my tab, as I was using MIUI on an my HTC Desire and I was very happy with it.
I looked through the forum and i read the newbie guides and after some stress i managed to root it using z4root. (First i try with the Superoneclick but it stuck on step 7)
Now i am trying to install the MIUI but in most guides i saw it says i must to have gingerbread, but i dont know how to get there, and i dont want to destroy my Tab. I was saving my money for many days to get it.
Can somebody help me to get to MIUI?
Thanks
The Tab is still a pretty useful device! It's a P-1000, not one of the other versions? In that case it's best to install Overcome. It's a great way to put GB on a Tab. Look for one of priyana's posts, he has links to instructions and the files you'll need.
I just saw one of priyana's posts. That link should be this thread.
ableeker said:
The Tab is still a pretty useful device! It's a P-1000, not one of the other versions? In that case it's best to install Overcome. It's a great way to put GB on a Tab. Look for one of priyana's posts, he has links to instructions and the files you'll need.
I just saw one of priyana's posts. That link should be this thread.
Click to expand...
Click to collapse
Hi ableeker and thanks for responding. Thank you for pointing me in the right direction. I have read so many posts these past few days and it gets a bit confusing. I will study the post you suggested carefully and i will ask any questions there...
To answer your question it is a GT-P1000 (it says so on the back) and i bought it used from Austria (ebay). It is Orange branded (indicated by Orange logo splashscreen at startup and shutdown).
In the about phone screen i get the following information:
Model Number: GT-P1000
Firmware Version: 2.2
Baseband Version: P1000BVJI3
Kernel Version: 2.6.32.9 [email protected] #1
Build number: FROYO.BVJJ2
Ideally i would like to know whether the fact that this device is branded means that i have to use a different / adjusted process to install Overcome. But i will also ask this question in the post you pointed out to me.
Thanks once again for responding!