Database Develop

[Q] Froyo Full JP6 / JPM Stock for odin?

Is anyone else sick of having to flash some eclair ROM then flash JP6/JPM over the top???
Why hasnt samfirmware uploaded a full ROM rather than sending us through some convoluted upgrade from an old one?
I would like to put together a full ROM package to flash from odin
* Complete JP6 / JPM ROM
* That does not require flashing any other ROM first
* If possible and/or additionally a z4moded kernel FULL release
So anyone can download and do a proper Odin flash with repartition and jump straight into running a script to convert to ext2/3/4.
After playing with some of these patched kernels and having the occasional complete reflash to do its very annoying that samfirmware doesnt have a full package for JP6 STILL.
Can anyone point me in the direction of some reading material so I can work out how?
Perhaps then we could have a link for a full release JP6 / JPM with / without z4mod built in on the front page...

Reserved for links to full JP6 JPM packages once we have them.
Full JP6 *Thanks to HaTeNL
Works without flashing another firmware before. Flash using these options:
CSC: GT-I9000-CSC-XENJP2.tar
MODEM: MODEM_I9000XXJPM.tar
PDA: I9000XWJP6-REV03-ALL-low-CL618121.tar
Odin 1.0, re-partition off, auto reboot on, reset time on.
Pitfile: s1_odin_20100512.pit

This is the official JP6 that was supposed to be released in the Netherlands:
http://www.multiupload.com/H4JB54LJ58
Works without flashing another firmware before. Flash using these options:
CSC: GT-I9000-CSC-XENJP2.tar
MODEM: MODEM_I9000XXJPM.tar
PDA: I9000XWJP6-REV03-ALL-low-CL618121.tar
Odin 1.0, re-partition off, auto reboot on, reset time on.
Pitfile: s1_odin_20100512.pit

HaTeNL said:
This is the official JP6 that was supposed to be released in the Netherlands.....
Click to expand...
Click to collapse
Thanks for that. Just going to download and test it
Any word on a full release of JPM / JPA?
Would much appreciate someones advice on how to swap the kernel in the PDA file for a z4moded one. Would make it nice and easy for anyone to download a full ROM ready to just kick the RFS nonsense out!

Vinnie8018 said:
Thanks for that. Just going to download and test it
Any word on a full release of JPM / JPA?
Would much appreciate someones advice on how to swap the kernel in the PDA file for a z4moded one. Would make it nice and easy for anyone to download a full ROM ready to just kick the RFS nonsense out!
Click to expand...
Click to collapse
Those roms are already out here..

You know if I can just swap the zImage in the PDA tarball and it should all be fine or are there some signatures or something that I will kill?
Swapping the zImage with 7zip causes the flash to fail at kernel - surprisingly enough.
What am I doing wrong?

Vinnie8018 said:
Reserved for links to full JP6 JPM packages once we have them.
Full JP6 *Thanks to HaTeNL
Works without flashing another firmware before. Flash using these options:
CSC: GT-I9000-CSC-XENJP2.tar
MODEM: MODEM_I9000XXJPM.tar
PDA: I9000XWJP6-REV03-ALL-low-CL618121.tar
Odin 1.0, re-partition off, auto reboot on, reset time on.
Pitfile: s1_odin_20100512.pit
Click to expand...
Click to collapse
Odin 1.3 can't be used?

HaTeNL said:
This is the official JP6 that was supposed to be released in the Netherlands:
http://www.multiupload.com/H4JB54LJ58
Works without flashing another firmware before. Flash using these options:
CSC: GT-I9000-CSC-XENJP2.tar
MODEM: MODEM_I9000XXJPM.tar
PDA: I9000XWJP6-REV03-ALL-low-CL618121.tar
Odin 1.0, re-partition off, auto reboot on, reset time on.
Pitfile: s1_odin_20100512.pit
Click to expand...
Click to collapse
Any specific reason why repartition has to be off ?

coradux said:
Odin 1.3 can't be used?
Click to expand...
Click to collapse
I used Odin 1.3, its fine.
EarlZ said:
Any specific reason why repartition has to be off ?
Click to expand...
Click to collapse
After reading the thread on PIT files it seems if you arent ticking the repartition box theres no point using one at all. I flashed without and made no difference. Theres a backup of the existing PIT on the phone and odin dumps that to work out where to put everything.

Has someone testes that does this root forum.xda-developers.com/showthread.php?t=788108 work on this firmware.

[Q] help with missing PDA and CSC

Hi All.
I recently flashed my SGT and I lost PDA and CSC as I was reverting from problematic JMG ROM back to more Stable JK5 ROM. My phone info shows.
PDA:
Phone P1000XJMF
CSC:
I would like to get PDA and CSC back as Kies doesnt detect any firmware to ask for upgrade.
TIA.

hi,
at this point, the best way is flash the Roto ROM v2 JMI via Odin from development thread.

DarkPal said:
Hi All.
I recently flashed my SGT and I lost PDA and CSC as I was reverting from problematic JMG ROM back to more Stable JK5 ROM. My phone info shows.
PDA:
Phone P1000XJMF
CSC:
I would like to get PDA and CSC back as Kies doesnt detect any firmware to ask for upgrade.
TIA.
Click to expand...
Click to collapse
after reflashing the rom via Odin, after restarting, you should go in recovery mode (keep press the power button and Up volume button). at this moment it will finish the instalation of CSC and PDA. it happened to me in the past, and that was the way to fix. hope it help!

Even if you have PDA, Phone and CSC I dont think you will be able to update via Samsung Kies.

PROBLEM WAS SOLVED. I flashed the jk5 stock firmware. And after recovery it worked. Thank you.

[Q] Unsuccessful CF-root on stock Gingerbread 2.3.3 JVK Kernel

Hi,
I am a newbie but I want to have root privileges on my GB 2.3.3 phone, so I read the instructions on how to flash the stock kernel to the CF root kernel (described in the thread: http://forum.xda-developers.com/showthread.php?t=788108) and gave it a try.
I started with the following official stock firmware and kernel from SFR (French provider), obtained thru Kies by updating from Froyo 2.2.1 to Gingerbread 2.3.3 (Official stock firmware was released 4th of July 2011):
Model number: GT-I9000
Firmware version: 2.3.3
Baseband version: I9000XXJVO
Kernel version: 2.6.35.7-I9000XWJVK-CL264237...
Build number: GINGERBREAD.XWJVK
Kies mentioned after the update to 2.3.3: PDA: JVK / PHONE: JVO / CSC: JV4 (SFR)
As the build number, specifies JVK, I selected the CF-root zip: CF-Root-XX_OXA_JVK-v3.1-CWM3RFS.zip
I flashed this CF-root kernel using Odin without re-partition. Odin successfully flashed it, next my device rebooted, after which everything looked normal. But then after half a minute, the screen goes black and devices reboots by itself.
This repeats continuously: after boot, I have the home screen and I can use my device for around half a minute (response is very slow though), then it reboots.
In recovery mode in Clockworkmod, I did ‘wipe data/factory reset’ and ‘wipe cache partition’, both ended successfully. However, the problem of the reboot after about half a minute stays.
In the Tweaks app, I managed to deselect all tweaks (in between a couple of reboots...), but no positive effect: My devices keeps hanging after half a minute and then rebooting.
During every boot, after the boot animation during the glowing S, the phone vibrates once but then proceeds the boot up to the home screen...
1.) Did I select the wrong CF-root kernel zip file?
2.) Can anyone advise my on how to get my phone rooted and working again?
3.) Or is flashing the complete stock firmware the only option?
Many thanks in advance for help.

I will look into that and try to help!

AFAIK CF-root kernels are for Europian roms.

Hi there,
I got a similar syndrom with a BUJVB (french provider SFR).
My config is => SGS GT-I9000 - PDA: BUJVB - PHONE: BUJV3 - CSC: GSFRJV8
I finally rooted the gingerbread by a manual operation from the speedmod kernel (loading superuser and busybox from the speedmod CWM2.5, then resinstalling my original BUJVB kernel)
Anyhow, did you get a clue why some cf-root do not work properly?
What causes the systematic reboot phenomenon?

kwatsie said:
Hi,
I am a newbie but I want to have root privileges on my GB 2.3.3 phone, so I read the instructions on how to flash the stock kernel to the CF root kernel (described in the thread: http://forum.xda-developers.com/showthread.php?t=788108) and gave it a try.
I started with the following official stock firmware and kernel from SFR (French provider), obtained thru Kies by updating from Froyo 2.2.1 to Gingerbread 2.3.3 (Official stock firmware was released 4th of July 2011):
Model number: GT-I9000
Firmware version: 2.3.3
Baseband version: I9000XXJVO
Kernel version: 2.6.35.7-I9000XWJVK-CL264237...
Build number: GINGERBREAD.XWJVK
Kies mentioned after the update to 2.3.3: PDA: JVK / PHONE: JVO / CSC: JV4 (SFR)
As the build number, specifies JVK, I selected the CF-root zip: CF-Root-XX_OXA_JVK-v3.1-CWM3RFS.zip
I flashed this CF-root kernel using Odin without re-partition. Odin successfully flashed it, next my device rebooted, after which everything looked normal. But then after half a minute, the screen goes black and devices reboots by itself.
This repeats continuously: after boot, I have the home screen and I can use my device for around half a minute (response is very slow though), then it reboots.
In recovery mode in Clockworkmod, I did ‘wipe data/factory reset’ and ‘wipe cache partition’, both ended successfully. However, the problem of the reboot after about half a minute stays.
In the Tweaks app, I managed to deselect all tweaks (in between a couple of reboots...), but no positive effect: My devices keeps hanging after half a minute and then rebooting.
During every boot, after the boot animation during the glowing S, the phone vibrates once but then proceeds the boot up to the home screen...
1.) Did I select the wrong CF-root kernel zip file?
2.) Can anyone advise my on how to get my phone rooted and working again?
3.) Or is flashing the complete stock firmware the only option?
Many thanks in advance for help.
Click to expand...
Click to collapse
That CF-Root JVK is for XXJVK, ie. a Gingerbread 2.3.2 build. This build is a number of months old. Use a CF-Root that is built for JVH or JVI.

I recently rooted my gingerbread 2.3.3 ace. Would the same method work for my girlfriends 2.3.3 galaxy s? Thanks in advance.
Sent from my GT-S5830 using XDA App

tidjidi said:
Hi there,
I got a similar syndrom with a BUJVB (french provider SFR).
My config is => SGS GT-I9000 - PDA: BUJVB - PHONE: BUJV3 - CSC: GSFRJV8
I finally rooted the gingerbread by a manual operation from the speedmod kernel (loading superuser and busybox from the speedmod CWM2.5, then resinstalling my original BUJVB kernel)
Anyhow, did you get a clue why some cf-root do not work properly?
What causes the systematic reboot phenomenon?
Click to expand...
Click to collapse
Just trying again solves the problem. Its more of an odin problem then a cd root problem and if you have to blame cf-root then it is also samsung based Such as odin.
hit thankxx if i helped. sent from my mind through telepathy (ya its possible)!

i was in the same situation rebootloop - so i just flashed this and then everything is workin great.
CF-Root-XW_NEE_JVH-v3.2-CWM3RFS.zip - [Click for QR Code] (6.70 MB, 42595 views)
thanks XDA.

[Q] After update to 2.3.3 no 3G umts anymore

Hello there,
Please help... or advise how to resolve this matter.
i have a Samsung GT-P1000 Tab:
PDA1000XXJQ1
PHONE1000XXJMF
CSC: P1000OXAJQ1
I flashed my device xx times now to GINGERBREADXXJQ1 with Odin and follow all recommendations and successfully upgrade and have it working! but accept my mobile roaming data is not functioning any more! No 3G UMTS.
I did also flashed the modem upgrade with a JMF FROYO one! but still nu success.
I' am able to make phone calls...

Xda never ceases to amuse me.
Sent from my GT-P1000 using XDA App

You right, i ****ed up my phone and i'm a noob... It is not funny what i have created - but your animated movie show reality... again...
I thought i read all necessary information for just a simple looking upgrade to Gingerbread 2.3.3
Do you have any hints to get me back on track, pleas....

hint : check instellingen=> Draadloos en netwerk => namen toegangspunten.
If it's empty google your providers settings..
for this hint, donate $$$ to Spacemoose for his quest for Honey on our Galaxy Tabs

Really is it just simple as that..... AARGGG
Just flashing right now again... just have to wait...
Heel erg leeg daar de settings...

Thx Ghostface - o so simple....
Do you know how to remove the Italian fixed icons / applications, in the applications menu..
Flashed:
Android 2.3.3 Stock Rom p1000xxjq1 p1000xxjq1 p1000xxjpz - Italian one.
Procedure (ODIN !)
- Download and extract the firmware zip
- Download and extract the attached gt-p1000_mr_PIT.zip
- Download and extract the attached dbdata.zip
- Flash the firmware tar as PDA, repartition enabled, use the attached PIT
- After flash immediately boot into download mode again
- Flash dbdata.tar as PDA (NO repartition)
- After flash immediately boot into recovery mode
- Wipe cache
- Wipe data / factory reset
and add CF-Root v3.3 for JQ1 / Gingerbread

Fixed all probs, also removed the factory default italian apps.
Thnx.
Sent from my GT-P1000 using Tapatalk

[edit] now been moved to Q&A, thats better

[q] gt 19000 help!!!

Hope the following makes sense? I have tried nurmerious things through this great forum before posting!
1) Galaxy Samung S GTI9000
2) I put firmware on this last year now I have Galaxy 3 now I want to put stock rom back on galaxy s
3) I tried various stock roms but when I go into KIES it says its a KOR rom instead of UK rom and KIES wont update it
4) I them tried Check Fus Download to check I downloaded the right stock rom and let it download for me. It flashed ok via Odin3
5) If i go into about phone firmware = 2.3.6 baseland = I9000BUJV4, Kernel = 2.6.35.7-I9000BUJVG-CL71281 [email protected]#2. Build = GINGERBREAD.BUJVG
6) When I plug this into KIES it says "you device does not support software upgrading via Kies - Current firmware version: PDA:JVG / PHONE:JV4 / CSCV:JV5 (KOR)
Can some please help were i'm going wrong
And thanks for this forum its awesome!!!

you can flash stock firmware with odin

When I used the downloaded stock rom it flashed it sucessfully? via odin

You got wrong stock ROM.
Go to www.sammobile.com
Over there, select device (I9000), select region Europe, then select a ROM corresponding to UK or Great Britain (in the column country) and download it. Flash via Odin.
Sent from my GT-I9000 using Tapatalk 2

Tried as above used odin and it flashed ok, now when i check about phone it has the following firmware = 2.3.6 - baseline = I900XXJW4 KERNEL= .6.35.7-i9000XXJW4-CL1043937 [email protected]#2 AND BUILD NO:- GINGERBREAD.XXJW4
After it completed sucessfully I wiped the cache and reset the phone all came up ok, but whne i connect it to kies it still says PDA:JW4/PHONE:JW4/CSC:JW5 (KOR) Your device does not support softwareupgrading via Kies - Any help would be apprieciated

Because jw5 is a non official firmware( the laterst release) and there is no official release for sgs.i think the last official release is jvu

You have to flash the right stock ROM that is available in your country.
Download the right ROM for your country and flash it and make sure its not a custom or modded ROM.
Hope this would help.

http://www.hotfile.com/dl/154795243/b1970af/I9000XXJW4_I9000OXAJW5_XEU.zip.html
Here u go..
Don't forget to hit thanks!!
Sent from my GT-I9000 using Tapatalk 2

Downloaded the link flashed it again and still them same when I go into Kies PDA:JW4/PHONE:JW4/CSC:JW5 (KOR) Your device does not support softwareupgrading via Kies

Root.
Install nitrality, change csc corresponding to UK.
Unroot.
Have fun.
Sent from my GT-I9000 using Tapatalk 2