Database Develop

SD Card Corruption with Nexus One (has happened twice)

Twice in the last two months my 16 GB Class 6 AData microSDHC memory card has popped up as being "corrupt" and needed reformatting after powering back up from reboot on my Nexus One.
The first time happened on CM 5.0.3.1, the second time was with CM 5.0.4.1 with the UV kernel. Both times, data could not be read either through the N1, my old G1, or my friend's Droid. Thus a reformat was required and data loss ensued.
Anyone else experiencing occasional data corruption on their SD card? Another friend had it happen to his G1 with an 8 GB microSDHC memory card recently, running the latest CM for the G1, also on reboot and battery swap.
Is there a common thread here? Could it be HTC hardware-related? CM software-related? Just coincidentally two bad memory cards? Me using chinese replacement batteries when swapping out? The UV kernel? Not trying to point fingers or throw stones, just trying to get to the bottom of this...just lost some great pics of a recent vacation I just got back from. Suggestions or hints are welcome!
TIA!

this has happened to me a few times but I was still able to get my data through amon-ra recovery. I think it have something to do with an improper dismount of the card.

I'm curious, what brand of memory were your friends using?

I actually had this happen when my n1 was still stock (16gb class6 card)
I put the sd card in a card reader on my pc, everything was intact so I backed it up, reformatted and still had the n1 report it was corrupt. I ended up having to shut down, remove card, boot up w/o a sd card in, then with the sd card back in I never had the problem again
I know I did a full format the very first time, that 2nd time I had done a quick format. I've done a format recently also via amonra for ext partition and still no problems.

I happend to me few weeks ago. After turned it on ... I couldn't do anything because the screen was black and any key or type of touch was useful ... so I removed the battery and at the next start the SD wasn't readable anymore!
sry 4 my bad english!

erikikaz:
i'm running a 16 GD Class 6 AData memcard in my N1, my friend is running an 8 GB class 6 SanDisk memcard in his G1. Neither of us is running Apps2SD or anything weird.
glad to see i'm not the only one with this issue. was gonna buy a new 16 GB card but saw an article yesterday that sandisk is coming out with a 32 GB class 6 sdhc card in a month so i'll just wait for that one.

Same here
Same thing has happened three times on my Sandisk 16gb. I am running stock everything on nexus..nothing funky app wise.
After the first time it happened I replaced the sd card. It still happens. I have never been able to fix the card other than reformating. Chkdsk /f on win7 gets to 98% then throws an i/o error.
There is something majorly wrong. It seems that it happens in all android phones from time to time not just the nexus one. The consensus online seems to be that it is a mount/dismount issue that corrupts the card. I never mounted or dismounted the card at all with PC and it still happens so not sure what else it could be.
Do you think it is a phone hardware issue that would resolve with a new handset?

Has this ever happened to anybody using the standard 4GB card?
Where did you purchase your micro SD cards? There are a lot of fake/faulty cards being sold. I bought a fake one (unknowingly, obviously) and it kept getting corrupted until I tested it properly using h2testw.

I have the same problem on my nexus! I use an LG 16GB Card and CyanogenMod-5.0.5.3-N1! Any way of recovering the data without amon-ra?
Regards,
roman

Gr8gorilla said:
I think it have something to do with an improper dismount of the card.
Click to expand...
Click to collapse
+1 Make sure you dismount from computer first...otherwise this problem will pop up again...and may not be correctable next time. (There's a reason why the phone asks you to properly dismount from computer first)

no **** my n1 has the error message damaged sd card. restarted the phone a couple times and same message. what should i do? i see peoples solutions on this thread but idk where to start. i have a rooted n1 running cyan 5053 with apps2sd

I have had this problem a couple of times too, the latest being this morning
I have a stock N1 with a 16GB Sandisk card. The first time this happened, i went to use the camera and it said insert SD card, even though there was one there, I rebooted the phone and then got the Damaged SD card message.
This morning I was on the train, had been using the phone to read the news earlier with no problems, I got it out of my pocket and screen was black. and the phone completely unresponsive. Removed and replaced battery, booted up and got the Damaged sd card message again.
Both times I have been able to recover most of my files by putting the card in a PC, the first time I found that a couple of my photos were corrupted and unrecoverable, indicating that possibly it was the camera app that may have caused the issue the first time.
This time though, I found that some of my music tracks were corrupted along with one of my videos, and also a directory on the SD called LOST.DIR. Everything else was fine.
Not sure why only these files were affected, as I was not listening to music or watching any videos, so I dont see why the nexus one should have been accessing those parts of the card when it corrupted.
I could not delete the corrupted files, even on my PC, accessing them causes the PC to lock up. The only way to get card working again seems to be a format.

If only the format would work!
Regards,
Roman

Just happened to me as well. Genuine 8gb Sandisk, class 4.
After a reboot Nexus reports corrupted card. It really seems corrupted, I'm unable to read it in a PC or anything else:
[ 1042.673542] sd 11:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1042.673551] sd 11:0:0:0: [sdb] Sense Key : Medium Error [current]
[ 1042.673561] sd 11:0:0:0: [sdb] Add. Sense: Unrecovered read error
[ 1042.673571] end_request: I/O error, dev sdb, sector 10248
I'm using CM 5.0.4.1 with UV kernel.

It's happened to me, even using the "safely remove hardware" function on the pc. i started just using the unmount on the phone which seemed less problematic.

Yep...add me to the list. Running stock N1 was playing music when it ocurred it started skipping through the tracks fast right before it stopped. It has affected/removed all my pics and left the music.

I'm with you all:
2 times on my Motorola Milestone, using a 16GB class 4 "unbranded" card
3 times on my Nexus, using that same 16GB class 4 card.
2 times on my Nexus, with a 16GB class 6 SanDisk card.
Most times, the data has been available by mounting the card into a PC or Mac directly, though my Mac has seen the card as "read-only" in these cases.
I seem to have this problem after mounting the card onto my work PC, though I don't often do that. I mostly use ADB to copy files. Maybe it is linked to leaving the debugging interface up all the time? I do that and I'm sure that most of you do as well...

Me too
I am using FRF91 MRCr21 and I am on a 800mv 070810 .35 rc4 kernel. Newest 5.00.08.04 radio.
Twice now after using quickboot my phone has reported my SD card damaged and it says I will have to reformat. It is a 8gb class 2 sandisk, real. One time I used quickboot to enter recovery mode and the other was only to reboot the phone. Has anyone else had this problem? What is the best fix? Both times I rebooted my phone was stable. I wasn't downloading or installing anything. Thanks!
My phone can't read the card. If I pull the card and put it directly in my computer it won't read either. Both OS can't read the file system and want me to reformat.
Neither happened due to not dismounting. Anyone correlate the problem with quickboot?

have had zero luck with adata 16GB classs 6 cards. i have gone through 2 of them however their 8 GB card has been awesome

Just had this with a Sandisk 16GB Class 2 card. Inserted into card reader, copied something, popped it back into the phone, corrupt card message. Even the computer says I have to format it.

Differences between booting from uSD and emmc?

Hey everyone,
I currently run CM7 off an SD but I was wondering if there are benefits to replacing the stock os on the emmc?
Are there any speed differences or technical pros to it?
Thanks for the input! This is a really fantastic forum!
sent from my nook color

joelszs said:
Hey everyone,
I currently run CM7 off an SD but I was wondering if there are benefits to replacing the stock os on the emmc?
Are there any speed differences or technical pros to it?
Thanks for the input! This is a really fantastic forum!
sent from my nook color
Click to expand...
Click to collapse
From my experience the booting time is almost half if using emmc version. (SD card version ran on a class 4 card). After booting the performance is almost same. You may get better boot time for sd card using a class 6 or class 10 card.

I dont have an answer for you as i picked mine up yesterday and decided to go the SD route at the start i am curious on this question myself.

JustusIV said:
I dont have an answer for you as i picked mine up yesterday and decided to go the SD route at the start i am curious on this question myself.
Click to expand...
Click to collapse
Well from my experience, running from the SD card is very smooth... so for ease of use i highly recommend it for a first go.
I have a follow up question- for some reason my macbook recognizes the second partition of my sd card but my pc desktop does not. I am referring to the partition generated for storage by the CM7 installation process that allows storage on the data card simultaneously.
Any ideas why this would be?
sent from my nook color

joelszs said:
Well from my experience, running from the SD card is very smooth... so for ease of use i highly recommend it for a first go.
I have a follow up question- for some reason my macbook recognizes the second partition of my sd card but my pc desktop does not. I am referring to the partition generated for storage by the CM7 installation process that allows storage on the data card simultaneously.
Any ideas why this would be?
sent from my nook color
Click to expand...
Click to collapse
I use Macs and Windows machines rarely (and I am guessing you run Windows on the desktop) but my guess is the ext4 partitioning that CM7 uses.
I seem to recall that working- at least somewhat- on Mac but not on Windows, but I am not positive.

i chose sd, because it's super easy to backup my sd card as an image by popping it into my laptop. I can then burn that image back to a sd card if i want to try a new android build without messing up my default android install. I can always boot into the original nook os if i want as it is unmodified.
i used a class 2 and it was pretty slow. moving up to a class 6 and 10 has really helped and i don't notice any slowness.
i have not run off internal memory though so i don't have a baseline to compare.

eMMC is faster than my class 2 uSD cards, and it's easier to swa stuff back and forth from a computer/phone/camera/whatever with a removable uSD.
Sent from my Froyo'd Epic using XDA App

Cool, I've been wondering about this myself and was about to make this same thread.
I was concerned because I get a ton of force closes running off the SD, and I wondered if that was a problem that would be solved by going to eemc. Or if somehow I've made a mistake setting up my card and that's the issue. I'm very knew to this whole scene, so I'm still a bit scared of rooting at the moment and would love to iron out the problems I'm having with the SD booting. Things run fast, and fairly smoothly but eventually something will force close, like Market, and then Google Frameworks and then pretty much everything will refuse to run after I tap their icon. Forcing me to restart. Also, some things, trying to download new skins for Beautiful Widgets is impossible. Only get force closes.
I can't figure out if it's anything in particular that causes it to spiral out of control. And what makes it more annoying is this is my girlfriend's new Nook, I'm trying to get it set up for her to work as smoothly as possible. If it was just mine, I wouldn't be as bothered by messing around and trying different configurations and whatnot. But I know she won't be as patient and tolerant of these issues and won't want to keep bugging me with every problem that pops up.
Would you say this is likely a localized problem on my end through some fault of my own? From this thread, it seems people are having pretty great experiences with the SD method. Which might be reassuring. I think I'll do a backup and start from scratch this evening.

@JRSly: What type of uSD card are you using. I was experiencing the same problems you had with booting, force close, refuse to run, thus a final restart. After swapping out four different types of uSD cards, SanDisk (class 2 and 4), A-DATA (class 6), Patriot (class10), I finally deteremined that the Nook is very picky about the type of card. All the cards work fine in my digital camera or PCs, but the A-DATA and Patriot are slow and often hang in the Nook. I am now using the three Sandisk cards with no problem. I recently updated to Nookie Froyo 6.8.5 and it runs great on the SanDisk cards. Just for the test if it will run faster on A-Data (class 6), wouldn't you know it starts to hang and FC just like before. I guess I'll use the A-Data card in my digicam. Try a Sandisk card and see what happens. I even try one of my old Sandisk 2GB card from my Blackberry which is unmarked but has a class 10 performance when measured.

I'm very new to this... and I keep seeing emmc.
What is this? Internal memory?

ax135 said:
@JRSly: What type of uSD card are you using. I was experiencing the same problems you had with booting, force close, refuse to run, thus a final restart. After swapping out four different types of uSD cards, SanDisk (class 2 and 4), A-DATA (class 6), Patriot (class10), I finally deteremined that the Nook is very picky about the type of card. All the cards work fine in my digital camera or PCs, but the A-DATA and Patriot are slow and often hang in the Nook. I am now using the three Sandisk cards with no problem. I recently updated to Nookie Froyo 6.8.5 and it runs great on the SanDisk cards. Just for the test if it will run faster on A-Data (class 6), wouldn't you know it starts to hang and FC just like before. I guess I'll use the A-Data card in my digicam. Try a Sandisk card and see what happens. I even try one of my old Sandisk 2GB card from my Blackberry which is unmarked but has a class 10 performance when measured.
Click to expand...
Click to collapse
I feared that this might be a possibility too. My first attempts were with a little 2Gb card I'd had lying around and it didn't work very well at all. I couldn't get past installing Gapps for all the force closes. The next day I went to Target to get a larger 8 Gb one so I could also play around with Honeycomb, it's a Class 6 Lexar card. I started over last night and tried a couple of attempts at wiping and burning the image and inevitably ran into the same problems. It looks like a crummy(at least in terms of what the Nook likes) card is a distinct possibility. I'll give Sandisk a shot.

BlizzofOZ said:
I'm very new to this... and I keep seeing emmc.
What is this? Internal memory?
Click to expand...
Click to collapse
Yup. (I didn't get it either.)
Since MMC is a sibling of SD cards, it's basically dedicated internal SD storage with a controller.
http://en.wikipedia.org/wiki/MultiMediaCard#eMMC

BlizzofOZ said:
I'm very new to this... and I keep seeing emmc.
What is this? Internal memory?
Click to expand...
Click to collapse
You got it in one.
sd card is self explanatory, of course, and emmc is the internal memory of the NC.
The only DISADVANTAGE to running on emmc is that you lose the stock B&N version of Android.
Other than that- it boots a bit faster, may run a bit faster and be less likely to have force closes and similar problems.

xdabr said:
Yup. (I didn't get it either.)
Since MMC is a sibling of SD cards, it's basically dedicated internal SD storage with a controller.
http://en.wikipedia.org/wiki/MultiMediaCard#eMMC
Click to expand...
Click to collapse
That's what I thought!
Thanks for the cofirmation

[Q] Cannot boot from microSD card

Hi all.
I have been trying to install CM7/gingerbread over the past couple of days to no availe.
First I tried my 16gb card and now I've tried my 4gb card. Unfortunately, I don't have any smaller, or non SDhc, cards around.
Tried holding the power button, but that doesn't seem to make a difference. I have attatched a screen capture of the sd card contents. The "extra" folders at the top were not originally there, but were added when it launched into the normal OS.
One thing that came to mind is I have installed ClockworksMod to internal memory earlier. Could that be screwing up my being able to boot the SD card?
Robert
(will attach image later as Dolphin HD won't let me do the pull down for whatever reason)

I found my Nook Color was very finicky about the card. It did not like the Transcend 4 GB class 6 that I had, but worked on some generic 2 GB card that I had leftover.
See if you can get a cheap brand name 2 or 4 GB card and try it with that.

[Q] CM7 eMMC SD Card Corruption

Hi there! I've been using CM7 for a while now and have had three or four occasions so far where my 16 Gig Patriot Class 10 card has ended up with either partially or completely corrupted data and I'm curious if this is just an issue with a cheap card, some feature of the Nook or related to something in CM7. Most of the time it will eventually come up with a damaged SD card warning but prior to that my directory structure gets mutated into symbols instead of letters (it's current state).
I'm planning on swapping out the card with a SanDisk I have here so if it's the card I suspect the problem will go away but mostly I was wondering:
1. Anyone else have this issue?
2. Are there any known fixes?
Appreciate any help. Would eventually like to be able to use this card for storing movies but having it fritz out from time to time is a real pain with the amount of stuff android keeps on the SD cards.

[Q] Help with using microSD to run CM7

Okay...I've read through quite a few posts and forums here but I still need answers. I apologize if I repeat something that's been asked and answered somewhere else.
I have a Nook Color currently at stock 1.3. I rooted it back in February and was okay with that until I jumped back on the forums and read about CM7. So I installed CM7 to the Nook directly (not booting off an SD card.) When I realized that would not allow my kids to use their Nook books, I took it back to stock and found instructions on how to boot CM7 from an SD card. GREAT!!! However, I now cannot get the file to write to my card. I have a PNY and a Transcend each 4gb. My computer will recognize each card, but when I try to use WIN Disk 32 to write the file to the card it seem to work, but when I check the card, the computer says it needs to be formatted! I used the Transcend to write the files and put CM7 directly on the Nook before, so why won't things work now??? How can I fix it? The PNY is brand new, never been used. I'd go buy a SanDisk, but I'm afraid I'll just have the same issues. I have a SanDisk MoblieMate SD+ CardReader.
I really appreciate any help! I can follow instructions, but please don't talk about partitions, scoobie doobies, or use tech speak. I'm not an idiot, but I do not understand the computer/tech jargon. I'm impressed by those that do, however, so it's to all of you that I send out my question!
THANK YOU!!! In advance!

Some card readers that are "built in" to your computer, will have this error. The usual work around is to use a separate and external card reader.

First off, I have gone through 3 cards and am now sucking it up and buying the Sandisk card. Bottom line, the Sandisck 4/8GB Class 2 or Class 4 cards are simply the best to use for this.
I had the same issues you describe with my Transcend and another off brand.
Once you do the put the Image on the card, you have to pull it out and put it back in and it should show you a tiny "root" partition, this is what you copy the CM7 or whatever ROM into and then stick the card into the nook, the rest is pretty much automated until it is done.