Which modem file should I choose when installing the Overcome ROM? the info for my PDA and Phone both start with P1000, I'm thinking I should choose the JMF Modem but what if I choose to go with a carrier eventually and I want to use AT&T will this modem effect it? and can I choose the AT&T modem file which would be the JK3 Modem or would that brick my tab? please, I would greatly appreciate any one who could answer me back quickly I'm trying to flash this ROM as im typing this have ODIN ready to go and just waiting to see what my best bet is with these Modem files. thank you
JMF modem works well with almost all carriers including AT&T. Only T mobile US is problematic. If you have signal or data transfer issues or the jk3 works better for you then flash it.
Related
I've searched for days through XDA forums but I finally gave up searching for answers and decided to start this thread in hopes of getting help.
I have a stock Captivate running Android 2.1
I would like my phone to be running:
1. I900 Galaxy S Rom - European Version
2. a modem file which will enable the US 3G radio that's built into the Captivate.
My understanding is that simply installing a European Rom version will take away the phone's capability to connect to the 850mhz frequency of ATT since the European Galaxy S only supports 900/1900/2100 bands so installing the correct modem file is important.
I don't care which Rom is used but a Froyo Rom would be nice.
Can anybody please tell me what files I need to download (tar, pit, csc, md5, etc.) and how to use them (which exact slots to put the files in using Odin 3).
Any help would be much appreciated.
Thank you so much!
http://forum.xda-developers.com/showthread.php?t=818030
There's a couple other ROMs that are similar in nature.
Didn't someone get JME Rom working on CDMA Sprint Tabs? By changing the build name around?
I cant find the post, but who ever it is, please give us more details. How'd you do it? Do you recommend it? How is it holding up? Does it brick anything (GPS, MODEM?)
Thank you!
I did it to my Sprint Galaxy Tab, original post here (http://forum.xda-developers.com/showthread.php?t=929898)
I had to remove movinand.mst and it flashed fine using Odin, I just followed the directions there.
HOWEVER, the way I did it will make the Tab WIFI Only with no known way to get back until someone can figure out how to dump the sprint stock modem.bin.
That is fine with me as I did not want the 3G, but did want the Bluetooth HID. (now my Bluetooth Mouse and Keyboard work)
You might be able to pull the modem.bin file out as well as movinand.mst but I have no idea what that would do, sounds very risky.
M.
did that brick your GPS though?
I use it as WIFI Only as well.
How does the JME run on the tab?
Can you upload the exact JME rom you updated for us CDMA users who are kind of new at this? That is if you still have the version you edited for the Sprint?
If there's one thing I learned with flashing ****.... as long as you don't **** with the radio you can't really mess it up. With that said, don't flash a new modem (radio)
exactly then, cant we just have all these ROMs take out the Modem.bin, wouldn't it be flashable to CDMA then? or no
Yes it borked the GPS as I flashed with the modem file to get rid of sprint, works fine so far and I can use my Bluetooth mouse and keyboard now, had to reinstall all apps though.
I just Flashed Roto's JMG last night, will see how that goes.
I used the ROM from here http://forum.xda-developers.com/showthread.php?t=894763 and took out movinand with 7zip.
I assume you could take out the modem file as well or try the update version.
I would put in a request to Rotohammer to make one for the CDMA tabs without modem and movinand to be safe.
No idea if flashing without the modem file will fry the CDMA modem as I cant test this do to no one being able to get the stock Sprint modem dumped yet.
M.
I have no experience in doing this so I was curious on just how someone would go about dumping the stock Sprint Modem? also would we be able to use the epic 4G's modem since it's similar? or would that not work due to the epic having 4G and being a different device? If I knew what direction to go I'd certainly be interested in getting in to this more.
Now if someone can just confirm how to flash without killing the modem, we'll be cooking with gas!
Morolinith said:
Yes it borked the GPS as I flashed with the modem file to get rid of sprint, works fine so far and I can use my Bluetooth mouse and keyboard now, had to reinstall all apps though.
I just Flashed Roto's JMG last night, will see how that goes.
I used the ROM from here http://forum.xda-developers.com/showthread.php?t=894763 and took out movinand with 7zip.
I assume you could take out the modem file as well or try the update version.
I would put in a request to Rotohammer to make one for the CDMA tabs without modem and movinand to be safe.
No idea if flashing without the modem file will fry the CDMA modem as I cant test this do to no one being able to get the stock Sprint modem dumped yet.
M.
Click to expand...
Click to collapse
I killed my modem but I need to figure how to get it to mount my sd card.
Sent from my DROIDX using XDA App
Sprint: SPH-P100 firmware
I saw an article on: http://www.samsunguniverse.com/forum/topic56.html
and got a link from:[email protected] to donload the stock rom for flashing...
download site: http://depositfiles.com/files/elmpfgeel & http://fileshare.in.ua/4106185
This has 5 files:
SPH-P100.DJ30.tar
modem.bin
Odin3v1.31.exe
Odin3.ini
pit.pit
paragpatil said:
I saw an article on: http://www.samsunguniverse.com/forum/topic56.html
and got a link from:[email protected] to donload the stock rom for flashing...
download site: http://depositfiles.com/files/elmpfgeel & http://fileshare.in.ua/4106185
This has 5 files:
SPH-P100.DJ30.tar
modem.bin
Odin3v1.31.exe
Odin3.ini
pit.pit
Click to expand...
Click to collapse
----------------------------------------------------------------------
I know that file name is floating around as a flashable "almost stock" ROM that has the Epic 4G modem inserted, so you can recover your sprint tab but lose gps. I would get someone who has already borked their gps by flashing to test it and see if it fixes it before everyone goes flashing this ROM.
If I was doing a restore using the files posted I would not flash the modem.bin. That's what breaks the Tab, not the software.
Need help I bricked my Galaxy Tab by Sprint trying to flash Overcome. Now I am stuck at the Galaxy/Samsung screen of death. Computer recognizes sometimes and others not. Is there a way to get it into download mode again or a I screwed.
dfinney67 said:
Need help I bricked my Galaxy Tab by Sprint trying to flash Overcome. Now I am stuck at the Galaxy/Samsung screen of death. Computer recognizes sometimes and others not. Is there a way to get it into download mode again or a I screwed.
Click to expand...
Click to collapse
Well you can't get any worse, so try this file to load;
http://forum.xda-developers.com/showpost.php?p=11139968&postcount=10
Keep trying to get it into download mode, down volume and power depressed together.
So this is my previous thread question:
http://forum.xda-developers.com/showthread.php?t=982478
Basically I'm stuck on i9000XXJP1 and I cannot find a rom to flash to next, or the instructions on how to flash to the next rom. I do have Odin and the 512 pit file, but a lot of roms seem to send my phone into oblivion.
Here is the list or ROMS i've tried after being in XXJP1:
BUJS3
UGJG8
XXJPC
BVJJPD
UGJH2
UGJK3
XXJP2
UGJL2
I used these roms with Odin starting from XXJP1. If anyone knows how I'm supposed to go about this, please let me know. My phone is modemless right now. I can only use Wi-Fi and not my 3G...
PLEASE HELP!!!!
Have you added the csc or your 3g settings in Wirelees and network / mobile networks / Acces Point Names / ?
jt_kyle said:
So this is my previous thread question:
http://forum.xda-developers.com/showthread.php?t=982478
Basically I'm stuck on i9000XXJP1 and I cannot find a rom to flash to next, or the instructions on how to flash to the next rom. I do have Odin and the 512 pit file, but a lot of roms seem to send my phone into oblivion.
Here is the list or ROMS i've tried after being in XXJP1:
BUJS3
UGJG8
XXJPC
BVJJPD
UGJH2
UGJK3
XXJP2
UGJL2
I used these roms with Odin starting from XXJP1. If anyone knows how I'm supposed to go about this, please let me know. My phone is modemless right now. I can only use Wi-Fi and not my 3G...
PLEASE HELP!!!!
Click to expand...
Click to collapse
Try flashing back to JM1 and then back to what you prefer.
Enjoy your SGS.
If you have Wifi than your modem works , you don't have the apn settings set
You can always build your own in the rom kitchin choose your modem and CSC files .
http://forum.xda-developers.com/showthread.php?t=817703
jje
OmerX: How would I go about setting up the APN? I go into the setting and theres nothing there. it's just blank. I have the option to create a new one, but how would I go about getting the information to create the access point?
Do I have to call my service provider?
MAKFOTO: where can I get JM1? and when I get it, do I use odin with 512 pit? repartition checked or unchecked?
sorry about the questions, this is just really frustrating after 2 days of not being able to use my phone properly and I don't want to mess it up.
Hi,
I'm under the impression that the radio is different from the modem, therefore my previous efforts to fix a problem with the auto-connection to HSDPA/3G were somewhat in vein. If I am correct in this, it could be the reason that my "phone information" settings won't stick (revert to default) and my phone, once connected to EDGE, will not automatically reconnect to HSDPA/3G.
Would someone be so kind as to point me in the direction of CWM-flashable radios? If needed, I am on the AT&T network (U.S.) with the international GT-I9000. ROM and kernel are in the signature, modem is JPY but flashing to the U.S. modem made no difference.
Thank you for your help or even your attention on the matter. I plan to write this up as a tutorial for this very problem should this solve the issue which I believe it will.
All the information you need is here:
http://forum.xda-developers.com/showpost.php?p=9579987&postcount=11945
It's telling me it's a bad link. I'll try to receive it through search and post the link if I get it.
EDIT: http://forum.xda-developers.com/showpost.php?p=9579987&postcount=11945
I flashed JPP to see if that can fix the issue as it's compatible with the U.S. I'll edit again once I go outside in order to see if it auto connects to HSDPA once I'm out there. It's a good test IMHO as I only have the 1900mhz band of wcdma therefore it doesn't penetrate the walls of my place of work.
edited the post above to fix the URL
I went out and checked. It still requires me to go into wcdma only and then back to wcdma/gsm in order to get hsdpa, also, the changes in phone information still don't stick. I need the actual radio file in a CWM flashable zip. Also, after changing modems to JPP, speed test doesn't work. I'll just uninstall from the market and re-install since the data connection is still works and see if there is any improvement on that front.
Which one is the radio file as opposed to modem file .
jje
EDIT: It's in the modem but not included with the modem as far as I know. Specifically, I need to flash a new Radio Image zip file. I found some through cyanogenmod but I'm not sure if it would be a good idea to use those as they may only be working with cyanogenmod ROMs.
Modems and CSC files flash from an update zip via the rom kitchin .
http://romkitchen.org/
http://forum.xda-developers.com/showthread.php?t=817703
jje
I edited the post. Those modems don't contain an updated radio image or any radio image, i think. It's more a matter of finding the right radio image file to flash.... http://forum.xda-developers.com/showthread.php?t=940095 It's midway through the first post. I'm not sure if I should flash it with Darky's ROM or not since it's cyanogenmod but I think as long as I switch to the JPY modem it should be fine.
Interesting.... I did some reading on the kitchen modems and apparently they flash a new radio image in the modem where others don't. I looked at my status through "about phone" and my IMEI SV changed from 01 to 02. When I get back outside to where I know I have HSDPA access, I will report on whether this fixes the lack of auto connect to HSDPA from EDGE.
There is no such thing as a radio for galaxy s devices, that is a htc phone term.
Instead, we have modems. The issue you're talking about is probably rom related.
Sent from my GT-I9000 using Tapatalk
So, you're saying a re-flash of the ROM then.... I think I've had this issue since Darky's 9.2 and I've flashed through the betas and I'm on 9.3 stable now. I have also done a wipe but not a repartition in Odin. I think Odin is a cleaner install then CWM but it's just so convenient to flash right from the phone. I guess I'll do that then.
Thanks.
[Q] Flashed with Overcome "Jupiter" great but "Phone Info" incorrect
Hi all, I finally managed to restore my original IMEI from a backup thankfully after I flashed with "Overcome - Jupiter", everything else is great except for this,
My IMEI SV is now 05 instead of orig. 01.
I still get no connection to Optus eventhough I get full bars of service & the YES OPTUS network info on screen.
I also notice when I enter code - *#1234# - my info is as follows
PDA : P1000BGJP4
PHONE : I9000UGJK3
CSC : P1000OXAJQ1
I am running a Samsung Galaxy Tab P1000.
Why is it saying PHONE : I9000?
Can anyone assist
Thanks
why you don't try to re-stock with safe gingerbread v5 from samsung and then flash overcome ?
now i checked *#1234# and all are ok ? i think you need to restock with safe gingerbread that will wipe everything
Because the JK3 modem was origionally from a samsung i900.
You can make the baseband anything by flashing a different modem.bin with odin.
Go to the development section, and find the modem stickie, and take any modem you like, I'm using JPD but I'm probably going back to JK3 today.
rangercaptain said:
Because the JK3 modem was origionally from a samsung i900.
You can make the baseband anything by flashing a different modem.bin with odin.
Go to the development section, and find the modem stickie, and take any modem you like, I'm using JPD but I'm probably going back to JK3 today.
Click to expand...
Click to collapse
So u recomend JK3? I am using the original modems that rotohammer used for the modem switch JL3 for the 2g+voice not sure wich one for the 3g, how can i change the modem to be used with modem switch. Thanks.
Sent from my GT-P1000 using XDA App
First, you will only be able to use a different voice+EDGE modem. The Roto-3G modem can't be substituted.
Try out the modem for a few days in your area to see if it will be better than the current modem.
If you want to make it your permanent voice+EDGE modem, copy it to the modemswitch folder, rename the Roto-2G modem something else, like Roto-rooter, then rename your substitute modem Roto-2G.
You can easily reverse the process.