Unbricking a hard bricked captivate - Captivate Q&A, Help & Troubleshooting

Can anyone confirm if the method described in the video below will work to unbrick a totally hard bricked samsung captivate?
http://www.youtube.com/watch?v=Rdn5GoRjhn0&feature=youtube_gdata_player
I am planning to flash gingerbread bootloaders on my froyo to move to a gingerbread ROM. If something goes wrong I should be able to revive it myself. Also, can someone let me know if the usb jig sold by mobiletechvideos help in unbricking a hard bricked captivate. Thanks for all the help.
from Continuum V4 on matted blue theme using XDA premium app

No, jigs are for "soft bricks" for actual bricks you need the more advanced jtag debricking, if your on mobile tech you'll see he offers that service...

The bricked phone shown in the video in the OP : is it a soft bricked one or hard bricked? Any brick expert out there who can help me?
from Continuum V4 on matted blue theme using XDA premium app

The one in the video is "soft bricked" which is why the jig works.
If the phone shows any signs of life at all but doesn't actually boot it's referred to as a soft brick. (incorrectly I might add)
The one and only true brick a "hard brick" is when no matter what, the phone does absolutely nothing. It has the same function as a brick, hence the term.

antonyvijai said:
The bricked phone shown in the video in the OP : is it a soft bricked one or hard bricked? Any brick expert out there who can help me?
from Continuum V4 on matted blue theme using XDA premium app
Click to expand...
Click to collapse
facepalm
a real brick, what you are calling a hard-brick is literally that.....it does NOTHING, wont power on, wont charge, wont do ANYTHING
i really hate the term 'soft-brick' although i have been known to use it from time to time, but you guys are tossing that word around not really knowing what it means
a brick is a brick... a paperweight, doesnt do anything at all
a JTAG should be able to bring back a brick
a jig is only useful for a phone that doesnt boot properly and plugging in USB while holding down vol up+down doesnt do anything.

Haha isn't a soft brick called clay??

studacris said:
Haha isn't a soft brick called clay??
Click to expand...
Click to collapse
LMAO....yes

studacris said:
Haha isn't a soft brick called clay??
Click to expand...
Click to collapse
Man you just started a new buzz word for "soft-brick"

studacris said:
Haha isn't a soft brick called clay??
Click to expand...
Click to collapse
Hahahahhaa...good one!
from Continuum V4 on matted blue theme using XDA premium app

studacris said:
The one in the video is "soft bricked" which is why the jig works.
If the phone shows any signs of life at all but doesn't actually boot it's referred to as a soft brick. (incorrectly I might add)
The one and only true brick a "hard brick" is when no matter what the phone does absolutely nothing. It has the same function as a brick, hence the term.
Click to expand...
Click to collapse
Thanks a lot studacris! Also, for inventing the word "clay" for soft.brick..
from Continuum V4 on matted blue theme using XDA premium app

Pirateghost said:
facepalm
a real brick, what you are calling a hard-brick is literally that.....it does NOTHING, wont power on, wont charge, wont do ANYTHING
i really hate the term 'soft-brick' although i have been known to use it from time to time, but you guys are tossing that word around not really knowing what it means
a brick is a brick... a paperweight, doesnt do anything at all
a JTAG should be able to bring back a brick
a jig is only useful for a phone that doesnt boot properly and plugging in USB while holding down vol up+down doesnt do anything.
Click to expand...
Click to collapse
Thank you!
from Continuum V4 on matted blue theme using XDA premium app

So, jtag is the one which is as expensive as a brand new phone right?
from Continuum V4 on matted blue theme using XDA premium app

antonyvijai said:
So, jtag is the one which is as expensive as a brand new phone right?
from Continuum V4 on matted blue theme using XDA premium app
Click to expand...
Click to collapse
not quite ... mobiletech offers it for $50. how much is a new phone out of contract? or even through insurance? atleast double that if not more...
you could lie your ass off and try with a warranty replacement. "i have no idea what happened, tried the kies update and now it wont come on at all" something to that effect.

studacris said:
not quite ... mobiletech offers it for $50. how much is a new phone out of contract? or even through insurance? atleast double that if not more...
you could lie your ass off and try with a warranty replacement. "i have no idea what happened, tried the kies update and now it wont come on at all" something to that effect.
Click to expand...
Click to collapse
I got my captivate last year from letstalk.com for $49.99 so for me it is about the same price. I like your warranty replacement idea LOL
from Continuum V4 on matted blue theme using XDA premium app

antonyvijai said:
I got my captivate last year from letstalk.com for $49.99 so for me it is about the same price. I like your warranty replacement idea LOL
from Continuum V4 on matted blue theme using XDA premium app
Click to expand...
Click to collapse
That was with a contract though. They are considerably higher when you buy them outright. This goes for ALL phones.

antonyvijai said:
The bricked phone shown in the video in the OP : is it a soft bricked one or hard bricked? Any brick expert out there who can help me?
from Continuum V4 on matted blue theme using XDA premium app
Click to expand...
Click to collapse
Google [images] soft brick... that is what you'll see.

studacris said:
Haha isn't a soft brick called clay??
Click to expand...
Click to collapse
LMAO!
Im a expert modder with a very hard bricked cappy. I made a simple mistake by loading the Continuum V5 with boothloaders (no probs) then trying to install the 3-button fix. Destroyed my sbl and now its so far gone. I orderd a new one on Ebay along with a Nexus S i9020A (At&t bands) to play with.
So as a friendly reminder for everyone, make sure your primary and secondary bootloaders always match or get ready to build brick houses.

neezygfx said:
LMAO!
Im a expert modder with a very hard bricked cappy. I made a simple mistake by loading the Continuum V5 with boothloaders (no probs) then trying to install the 3-button fix. Destroyed my sbl and now its so far gone. I orderd a new one on Ebay along with a Nexus S i9020A (At&t bands) to play with.
So as a friendly reminder for everyone, make sure your primary and secondary bootloaders always match or get ready to build brick houses.
Click to expand...
Click to collapse
I think this just happen to me...
Right before the update to 2.3.3 lol! I was trying to restore some old stuff and I guess I selected a 2.1 back up and restored everything (including bootloaders I assume) and now... hard brick. Guess ill see what I can do at ATT.
buttons, usb, nothing makes it say anything. I've had soft bricks before but this is total hard brick.
Update: Somehow even though the power didn't do anything, and plugging in the usb would do nothing (not even battery icon)... after trying multiple times I was able to get download mode thankfully. I guess I was less-softer-bricked lol! And the battery was over 70% before it was "bricked"

studacris said:
not quite ... mobiletech offers it for $50. how much is a new phone out of contract? or even through insurance? atleast double that if not more...
you could lie your ass off and try with a warranty replacement. "i have no idea what happened, tried the kies update and now it wont come on at all" something to that effect.
Click to expand...
Click to collapse
Samsung Captivate – Unbricking Service - $50.00 Free Return Shipping!!!
Description: Frustrated from a bricked Captivate? Not sure how to fix it or get back to the original firmware? Let us take care of this for you with the Desire Brick FIX! NOTE: THIS SERVICE ONLY OFFERED FOR NON HARD BRICKED CAPTIVATES. IF YOUR DEVICE POWERS ON AT ALL, WE CAN FIX IT. IF IT DOES NOT, THIS SERVICE WILL NOT HELP YOU AND YOU NEED TO RMA THE PHONE.
You will receive an email after your purchase with information about where to ship the device to. Return shipping is free and there is NO CHARGE OTHER THAN RETURN SHIPPING if your device can’t be fixed.
So Straight From Mobile Tech HardBricked Phones From The Captivate Cant Be Done By Him

l2otten said:
Samsung Captivate – Unbricking Service - $50.00 Free Return Shipping!!!
Description: Frustrated from a bricked Captivate? Not sure how to fix it or get back to the original firmware? Let us take care of this for you with the Desire Brick FIX! NOTE: THIS SERVICE ONLY OFFERED FOR NON HARD BRICKED CAPTIVATES. IF YOUR DEVICE POWERS ON AT ALL, WE CAN FIX IT. IF IT DOES NOT, THIS SERVICE WILL NOT HELP YOU AND YOU NEED TO RMA THE PHONE.
You will receive an email after your purchase with information about where to ship the device to. Return shipping is free and there is NO CHARGE OTHER THAN RETURN SHIPPING if your device can’t be fixed.
So Straight From Mobile Tech HardBricked Phones From The Captivate Cant Be Done By Him
Click to expand...
Click to collapse
He has recently started working on JTAG for Captivates. He has a thread around here somewhwere. Adam Outler was also working on JTAG, plus some very new things on how to unbrick with methods other than jtag.

Related

[Q] Is my Captivate bricked? Guys, I need your help !

Hello everyone,
One day, I upgraded a ROM firmware (I don't remember which ROM exactly..) on my Captivate..
I formated everything before update (data, cache, AND system !).
During update I was making a coffee, and when I came back on the phone,
it was absolutely dead.. Only a full black screen.. Not detected on USB, just nothing.
After that, I tried everything that was possible (a lot of combo's, Odin3..)
Then, I bought a JIG, but still nothing, I tried with some different combo's (I can't remember which ones..)
Now, I would like to recover my Captivate! But.. how ?
If someone find the final good solution, I would like to donate via Paypal
Thanks, in advance!
Need more info. Which rom? Did you use 3 button fix? Have you tried adb? What about holding volume down while plugging in usb? Are you sure battery isn't just dead (dont laugh, its happened)?
If you did all that, its most likely a hard brick. There are developers here that offer JTAG service.
As I said, I don't remember the ROM. I was trying every new ROM, so, I really can't remember.. Sorry
About 3 button fix.. I don't know what it is exactly !? If it is vol down+up+Power, yes I did !
Nope, I did not try ADB.. I tried to find informations about this, but I cannot find! If you can help me about this, u'r' welcome !
Vol down does nothing..
I think my battery is still alive. Because when I plug my charger on it, it becomes a little warm after some hours, so I guess it's still alive..
I saw some JTAG infos, but I don't know what to do.. Do I need to send my Captivate to a JTAG's owner in USA !? It's like 40$ to send a secured shipping to USA..
Thanks for trying to help me!
If a jig will not turn it back on you may need the jtag. There are threads about it.
zelendel said:
If a jig will not turn it back on you may need the jtag. There are threads about it.
Click to expand...
Click to collapse
Is that possible to buy a JTAG ? I think I can't make one..
I made some searchs on eBay but I found nothing.
Thanks for helping
EDIT : I installed ADB on my computer, now I would like to connect it to my phone, but.. Don't know how!? What combo do I need to do, for my captivate be recognized by ADB ?
Thanks.
zebra363 said:
Is that possible to buy a JTAG ? I think I can't make one..
I made some searchs on eBay but I found nothing.
Click to expand...
Click to collapse
JTAG is not something you can buy on ebay. As mrhaley said, you need to send your phone to one of the developers who offer JTAG service. They will fix it and send it back to you.
Download AIO toolbox, go to advanced and clock reboot into download mode with your phone on and it will go to download mode, no jig needed. it worked for me just now.
malicenfz said:
Download AIO toolbox, go to advanced and clock reboot into download mode with your phone on and it will go to download mode, no jig needed. it worked for me just now.
Click to expand...
Click to collapse
the problem is that he can't get his phone on...so toolbox won't work.
i'm no expert, but it sounds like a brick to me
Send it to a dev offering Jtag our try ur luck with samsung warranty. Worked for me.
Sent from my SAMSUNG-SGH-I897 using XDA App
Yeah mine wouldn't turn on either but I got it into download mode with the AIO toolbox
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Thank you guys for these answers.
* The problem is that I cannot send my Captivate to a JTAG's owner in USA,
because it's approximately 40$ fees to send it ! Then, with a return, it makes a total of 80$..
* Another problem is that I bought my captivate on eBay, and it's not under warranty..
* Maybe it remains the "ADB" solution (I never tried this), but I don't know how to connect my phone? because it stays turned off, then if I connect, I just get nothing..
Adb doesn't work unless you can get into the OS. You have a brick, jtag is your ONLY option of getting a working phone.
studacris said:
Adb doesn't work unless you can get into the OS. You have a brick, jtag is your ONLY option of getting a working phone.
Click to expand...
Click to collapse
Ok, I understand, but .. How could i use a JTAG if I cannot send my Captivate to USA ? (too much expensive!). Thanks
It's either bricked forever or you pay for jtag. Those are your only options.
studacris said:
It's either bricked forever or you pay for jtag. Those are your only options.
Click to expand...
Click to collapse
Is there not any other way for JTAG ?
Is that possible to make one myself ? I will never buy a Samsung anymore
How are you at soldering? The captivate is one of the hardest phones to jtag, the solder points are smaller than the width of a dime, it would be really easy to fry the circuit board trying to jtag it yourself.
studacris said:
How are you at soldering? The captivate is one of the hardest phones to jtag, the solder points are smaller than the width of a dime, it would be really easy to fry the circuit board trying to jtag it yourself.
Click to expand...
Click to collapse
I think I will not try, I'm really a noob with this
Thanks for help.
Do you think I can still sell my Captivate, for those who want to repair/fix or use parts? If I can, what kind of price? (my captivate is in perfect state, like new)
There's a user from XDA forums,Mcguyver1980. In one of his posts says he's in Belgium and can fix bricked phones. I don't know anything about this guy personally, but since you're about to scrap your phone I figured it wouldn't hurt for you to check if this guy is legit. Just make sure he understand it's a hard brick.
Sent from my SAMSUNG-SGH-I897 using XDA App
Don't think it matters where it was bought. Samsung has a one year warranty
Sent from my HTC Vision
cfmarque said:
There's a user from XDA forums,Mcguyver1980. In one of his posts says he's in Belgium and can fix bricked phones. I don't know anything about this guy personally, but since you're about to scrap your phone I figured it wouldn't hurt for you to check if this guy is legit. Just make sure he understand it's a hard brick.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Ah, thank you very much ! I will look about him..
I really hope he can do that ! Thank you again.
Pirateghost said:
Don't think it matters where it was bought. Samsung has a one year warranty
Sent from my HTC Vision
Click to expand...
Click to collapse
I bought my phone in december/january 2011.. But the seller did not say it was under warranty I received the original box .. So, do you think its under warranty ? But I guess postage is at my expense..

Can anyone suugest a good JTAG service to fix my bricked Captivate

Hi guys,
I have a samsung captivate brikced it , and it seems it need a jtag .
I am located in Montreal Canada , I dont mind shipping the phone is the service is reliable.
Check your pm
mobiletechvideos.com
Im not afraid to say that in public. LOL
if you are in Montreal. why is your country flag for USA?
and are you sure its bricked? there are situations where it LOOKS bricked but isnt.
i flashed with a black screen about 10 times last night making rogers one-click stock flashers.
how did you brick? and how are you sure its bricked?
Go with the un-brickable mod instead. That way if you do it again you won't need to jtag again
i897 running Fusion X
what he means to say is :mobiletechvideos.com can do the jtag OR do unbrickable mod for you.
Madtowndave said:
Go with the un-brickable mod instead. That way if you do it again you won't need to jtag again
i897 running Fusion X
Click to expand...
Click to collapse
^what he said'
Edit: beat me to it lol
TRusselo said:
mobiletechvideos.com
Im not afraid to say that in public. LOL
if you are in Montreal. why is your country flag for USA?
and are you sure its bricked? there are situations where it LOOKS bricked but isnt.
i flashed with a black screen about 10 times last night making rogers one-click stock flashers.
how did you brick? and how are you sure its bricked?
Click to expand...
Click to collapse
lol fixed that .
I was planning to sell the phone , so I decided to upgrade it before i sell it , and fuk i bricked it
the phone doesnt response to anything at all , plugging it in to the wall doesnt display anything on the screen .
fixed what?
and like i said.. if it is just a bad flash, the screen may do nothing. even plugging in... (noone ever has suggested trying that). try booting up odin, hold your keycombo and plug in.
see if the box turns yellow.
TRusselo said:
fixed what?
and like i said.. if it is just a bad flash, the screen may do nothing. even plugging in... (noone ever has suggested trying that). try booting up odin, hold your keycombo and plug in.
see if the box turns yellow.
Click to expand...
Click to collapse
Fixed the usa flag
I tried holding the combo keys with odin open but noting , the program doesnt find the phone , I also tried the program supplied in the forums to detect the mod on Linux but it only shows no device is connected .
yup u b bricked. but when u get it unbricked, try my rom!
jtag s3 i717 captivate
aymank1985 said:
Hi guys,
I have a samsung captivate brikced it , and it seems it need a jtag .
I am located in Montreal Canada , I dont mind shipping the phone is the service is reliable.
Click to expand...
Click to collapse
i know that is too late but i reply here if an other guy need jtag servce in montreal this is my contact EcoloTel.com

[Q] Bricked Captivate, at a loss here

A work friend of mine had his Captivate bricked mid update by his child.
I offered to fix it, brought it back by Heimdall (2.2). Charged it for about an hour and a half, then decided to try to upgrade it to gingerbread through Kies mini on my wife's laptop. It got stuck at 4%, and after a while I figured I could use Heimdall again, then flash 2.3 through other means.
Problem is now I can't get into download mode, nor powered on to the phone ! PC screen.
I owned a captivate before switching to Sprint, soft bricked it numerous times (Odin was my best friend) haven't ran into this problem before.
What next?
Sent from my Evo w/ CM7 using XDA App
So...it does nothing at all? Just sits there like a bag o'marbles?
If so, Sounds like it failed while updating bootloaders, and if that's the case it's bricked, like brick bricked. Only unbrickable mod can bring it back.
On a side note FU kies for flashing the bootloaders FIRST, that's just dumb....they should be at the end so if it does disconnect or fail it would most likely be before it got to the dangerous part, making it a safer flash. Wtf were they thinking?
Kind of what I feared, thought it was odd that it crashed the phone that hard after only 4%.
Luckily he's already got a new phone, I was just curious if I could bring the old one back to life.
Was kind of hoping it might be a battery thing.
Sent from my Evo w/ CM7 using XDA App
studacris said:
So...it does nothing at all? Just sits there like a bag o'marbles?
If so, Sounds like it failed while updating bootloaders, and if that's the case it's bricked, like brick bricked. Only unbrickable mod can bring it back.
On a side note FU kies for flashing the bootloaders FIRST, that's just dumb....they should be at the end so if it does disconnect or fail it would most likely be before it got to the dangerous part, making it a safer flash. Wtf were they thinking?
Click to expand...
Click to collapse
Heimdall does flash bl last. And when i make an Odin package with boots, i put them last in order.
Sent from my SGH-I897 using xda premium
I'm aware.... Just another example of the inefficiency of the companies compared to us dorks who do this as a hobby.
studacris said:
So...it does nothing at all? Just sits there like a bag o'marbles?
If so, Sounds like it failed while updating bootloaders, and if that's the case it's bricked, like brick bricked. Only unbrickable mod can bring it back.
On a side note FU kies for flashing the bootloaders FIRST, that's just dumb....they should be at the end so if it does disconnect or fail it would most likely be before it got to the dangerous part, making it a safer flash. Wtf were they thinking?
Click to expand...
Click to collapse
That is incorrect. You could have Mobile Tech Videos JTAG it and resurrect it. Although the unbrickable mod is the prefered solution (Hence unbrickable) JTAG is for the people who have never held a soldering iron in their hands before. They are reliable and can have your phone running stock within 5 days of mailing it off.
Off topic: why would it be so hard for samsung to solder those couple wires that make up the unbrickable mod in factory during production. Theres another defficiency in over seas companies, they try to get off doing as little work as possible. When you make a phone running an open source OS, 99% some kid in his basement is going to mod it to perform better than stock OS. which is the case of most androids. Cmon' samsung! get your act together!
Yes....jtag can bring it back, but once and then it.can be bricked again, why do that when you can send it to mobiletechvideos and get unbrickable mod applied? he offers that service too.
a solution and then A chance to brick and have to send it off again, versus a solution that is done once and then after that is fixable by the user themself...i am aware of jtag but on phones that have unbrickable mod it's really just too antiquated to be a viable option, which is why i didn't mention it.
studacris said:
Yes....jtag can bring it back, but once and then it.can be bricked again, why do that when you can send it to mobiletechvideos and get unbrickable mod applied? he offers that service too.
a solution and then A chance to brick and have to send it off again, versus a solution that is done once and then after that is fixable by the user themself...i am aware of jtag but on phones that have unbrickable mod it's really just too antiquated to be a viable option, which is why i didn't mention it.
Click to expand...
Click to collapse
Was not aware of that haha. Definately if deciding between JTAG for 40$ and Unbrickable mod for 45$, the 5$ will save you whole lot of time, money, and headaches.
McSpammer5 said:
That is incorrect. You could have Mobile Tech Videos JTAG it and resurrect it. Although the unbrickable mod is the prefered solution (Hence unbrickable) JTAG is for the people who have never held a soldering iron in their hands before. They are reliable and can have your phone running stock within 5 days of mailing it off.
Off topic: why would it be so hard for samsung to solder those couple wires that make up the unbrickable mod in factory during production. Theres another defficiency in over seas companies, they try to get off doing as little work as possible. When you make a phone running an open source OS, 99% some kid in his basement is going to mod it to perform better than stock OS. which is the case of most androids. Cmon' samsung! get your act together!
Click to expand...
Click to collapse
FYI...mobile tech videos will also do the unbrickable mod for you... either option is available from them. AdamOutler will also do it for you last i heard 30 bucks after shipping.
are you friggin kidding me?? its not just regular soldering... or a regular soldering iron. And JTag is a method of using open pads on the mainboard, used by almost all cell companies to program the phones and allows direct input/output control. And until AdamOutler's research into the processor was the only way to de-brick. oh.. and on some phones JTag requires soldering..
WIKIPEDIA Jtag.
TRusselo said:
FYI...mobile tech videos will also do the unbrickable mod for you... either option is available from them. AdamOutler will also do it for you last i heard 30 bucks after shipping.
are you friggin kidding me?? its not just regular soldering... or a regular soldering iron. And JTag is a method of using open pads on the mainboard, used by almost all cell companies to program the phones and allows direct input/output control. And until AdamOutler's research into the processor was the only way to de-brick. oh.. and on some phones JTag requires soldering..
WIKIPEDIA Jtag.
Click to expand...
Click to collapse
This is why I am tinkering with software, and not hardware ^.^. Thanks for the info.

Hope for a Bricked Vivid ?? { Discussions of Possible Solutions }

Hello Guys,
I recently PICKED up a DEAD VIVID from a fellow XDA'r for a really cheap price hoping I can UNBRICK it and use it
As I have understood , This phone was bricked during the ICS update Process. Looks like the Original Owner did not know what he was doing LOL,
The phone should be here in a WEEK
Can anypone shed any light on how this can be fixed and what are the possible options ?
JTAG ??? HTC service
I live in INDIA BTW
bump....
Hope I wasn't a Idiot to buy a bricked VIVID ??
I don't think any solution has been found so far. If you hadn't already known, our vivid section is really small with not a ton of development going on. The people that couldn't follow directions were sort of left in the dust, and I don't know of anyone working on a fix for the bricks.
Sent from my HTC PH39100 using xda premium
mally2 said:
Hello Guys,
I recently PICKED up a DEAD VIVID from a fellow XDA'r for a really cheap price hoping I can UNBRICK it and use it
As I have understood , This phone was bricked during the ICS update Process. Looks like the Original Owner did not know what he was doing LOL,
The phone should be here in a WEEK
Can anypone shed any light on how this can be fixed and what are the possible options ?
JTAG ??? HTC service
I live in INDIA BTW
Click to expand...
Click to collapse
How "bricked" is it? Will it power on? Get to HBOOT?
timbrendelaz said:
How "bricked" is it? Will it power on? Get to HBOOT?
Click to expand...
Click to collapse
I assume he's talking about the worst kind we've seen. Like the noob who pissed off PG and made him leave.
Sent from my HTC PH39100 using xda premium
If it powers on and you are able to go to HBoot it can be saved.
Sent from my HTC PH39100 using xda premium
If you can get into Qualcomm dload mode, you should still have a shot at fixing it. If it literally can't get into dload mode, does not boot into fastboot, or any other possible method of pushing files to the phone, then yes, it is bricked. You will have to find a way to use JTAG or send it to an HTC service center.
Thank you all !!!!! hoping for RIFF box to work
I started a similar thread.....I also have a bricked Vivid.....I have been able to get mine to be recognized by QPST on com6 in phone download mode.....the question is, what do I do now? QPST seems to be pretty straight forward, but I have no idea where to find the necessary files to flash the phone. Any ideas?
Sent from my SAMSUNG-SGH-I727 using xda premium
..
I haven't been able to find any .hex files for our device. Tried opening the various .img files extracted from the PH39IMG.zip in a hex editor and saving them as .hex files but QPST returns an error. I don't have any experience in hex editing, but I know I can't brick the phone any worse. My g/f has went back to an HTC Inspire so I am going to keep this hope alive as a side project.
Sent from my SAMSUNG-SGH-I727 using xda premium
Whether this guy who bricked his phone was a NOOB, isnt really an issue now is it? Nor if he is one of the ones whom ticked off PG.. I bricked my Vivid, and 1) I'm not a NOOB. 2) I followed Directions to the letter ... did everything right and it still bricked.. but i had insurance through BestBuy , sent it in and got a new phone 2 days later.. re-tried the same steps i did before which bricked my phone, and it went through without a hitch... We arent here to judge people nor start up another thread which can potentially lead to another mass exodus from XDA
Well I just got off the phone with HTC....seems I was wrong about their warranty policy. Even though I was not the ORIGINAL purchaser the PHONE is still under warranty. I will be shipping it back to HTC first thing in the AM.
Sent from my SAMSUNG-SGH-I727 using xda premium
Haha. Sucks for the guy who let it go so cheap. Lol
Sent from my HTC PH39100 using XDA
djelement1 said:
Well I just got off the phone with HTC....seems I was wrong about their warranty policy. Even though I was not the ORIGINAL purchaser the PHONE is still under warranty. I will be shipping it back to HTC first thing in the AM.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Wow, I didn't even know that. All you have to do is send back the phone, no receipt, no nothing?
I called HTC and gave them my contact info and all the info about the phone....IMEI#, serial #, and part #.....told them what the problem was....and they emailed me the info about sending the phone in...worst case is the problem won't be covered under warranty, in which case I will have to pay $135 to have it fixed. Hopefully it will be covered under warranty though....
Hi I seen your problem to me step and follow these steps to get here http://forum.xda-developers.com/showpost.php?p=20807914&postcount=2 download from here http://www.filefactory.com/f/002b74e0f4775869/ version for AT & T is this RUU_HOLIDAY_ICS_35_S_CINGULAR_3.26.502.52 install it from your computer and running.
Forgive my English.
djelement1 said:
I called HTC and gave them my contact info and all the info about the phone....IMEI#, serial #, and part #.....told them what the problem was....and they emailed me the info about sending the phone in...worst case is the problem won't be covered under warranty, in which case I will have to pay $135 to have it fixed. Hopefully it will be covered under warranty though....
Click to expand...
Click to collapse
did you send the phone to them? did you got it back? did you had to pay anything?
slapshot30 said:
Wow, I didn't even know that. All you have to do is send back the phone, no receipt, no nothing?
Click to expand...
Click to collapse
JEANRIVERA said:
did you send the phone to them? did you got it back? did you had to pay anything?
Click to expand...
Click to collapse
yeah i've sent them many phones, a couple of hd2, touch pro, touch pro2
can't remember what else but yeah if ur not original owner from a store they go by production date of the phone, i've been lucky that i always got them fixed for free, only once they said that said that the damage to my screen was due to physical damage and didn't fix it, and they charged me $40 (they call it a triage fee) other than that, i had to pay to ship it to them but it's worth the $5 using usps priority mail, they ship back at their cost with a nice box and HTC lint free cloth lol
You need the H-BOOT
mally2 said:
Hello Guys,
I recently PICKED up a DEAD VIVID from a fellow XDA'r for a really cheap price hoping I can UNBRICK it and use it
As I have understood , This phone was bricked during the ICS update Process. Looks like the Original Owner did not know what he was doing LOL,
The phone should be here in a WEEK
Can anypone shed any light on how this can be fixed and what are the possible options ?
JTAG ??? HTC service
I live in INDIA BTW
Click to expand...
Click to collapse
If you need the H-BOOT let me know i,ll give you a copy once you have it leave it as is just put the zip file (PH39IMG.ZIP) to the root of the sd card hold down vol button and power at the same time once you see it boot let go and the phone will do the rest it will unbrick it for sure.

Bricked

My Samsung galaxy s advance is not booting up at all no download mode no recovery nothing only one thin happens is whenever I connect my phone to pc it displays a unknown device in device manager u8500 Rom now the main issue is I searched the internet for the issue I came across some video using jtag box riff method and it is the most easiest method but I don't have any money to buy the box whereas I know how to use it but I want any other method whatsoever to unbrick it and I have commited a big mistake it's my dad's phone
Sent from my LG-P920 using xda premium
How did you brick it in the first place...?
And no, I don't think there's another method.
panda00 said:
How did you brick it in the first place...?
And no, I don't think there's another method.
Click to expand...
Click to collapse
USB jig can it be possible
Sent from my LG-P920 using xda premium
I bricked it by flashing only xxle2.md5 file to make it jb it didn't happen so tell me will the USB jig work
Sent from my LG-P920 using xda premium
Mohhamad Rehan said:
I bricked it by flashing only xxle2.md5 file to make it jb it didn't happen so tell me will the USB jig work
Sent from my LG-P920 using xda premium
Click to expand...
Click to collapse
If you can go to downlad mode, than you are not bricked your phone. Reflash or use guide to get back to GB.
P.S. Oh, didn't see your first post. You can go to some service to see if they can fix it with Jtag.
xxle2 is GB, not JB.
shut_down said:
If you can go to downlad mode, than you are not bricked your phone. Reflash or use guide to get back to GB.
Click to expand...
Click to collapse
Bro I have been in all sort of things and I believe in my self its not going to the download mode and it would never but I did one thing I have gone to the our famous repair market as they have the jtag riff box I will be buying soon wait for my to phone to repair I will post the status of it I was just asking if I can use the USB high method but not an issue now the riff box cost 5100 Indian rupees way to go to buy I will be making threads to solving all the issues of the phone thanx for the help bbrothers until then my Indian friends would understand my mother is saying mera jutta fake leather dil chi chi leather getting hit by the shoes of my mother
Sent from my LG-P920 using xda premium
usb jig will work only if your device is not dead that mean when you press power button if you get some splash screen or stuck at boot logo then usb jig will work but if no response from power button then usb jig will not work for you.
And the solution for the boot repair is using jtag riff box. Its not good idea to buy riff box just for your one phone its better to take it to service centre for repair.
And also there is a elite developer Adam Outler who can fix it messing with the hardware you can see his threads.
Anyway good luck :good:
tts
ManzzaShahi said:
usb jig will work only if your device is not dead that mean when you press power button if you get some splash screen or stuck at boot logo then usb jig will work but if no response from power button then usb jig will not work for you.
And the solution for the boot repair is using jtag riff box. Its not good idea to buy riff box just for your one phone its better to take it to service centre for repair.
And also there is a elite developer Adam Outler who can fix it messing with the hardware you can see his threads.
Anyway good luck :good:
Click to expand...
Click to collapse
no the service centre ppl of a piece of an ass they are giving me a solution of replacing the motherboard i am sure the ppl to whom i have given the phone will repair the issue i have seen the threads on other website i wont mention them i am sure and inshallah they will fix it and about the jtag riff box see dude u mentioned the name of the person i idolize the most after our prophet and my dad i want to become like him i wanna have a career as a developer just some of my small mistakes i have to look over thats why i am buying the box
Mohhamad Rehan said:
no the service centre ppl of a piece of an ass they are giving me a solution of replacing the motherboard i am sure the ppl to whom i have given the phone will repair the issue i have seen the threads on other website i wont mention them i am sure and inshallah they will fix it and about the jtag riff box see dude u mentioned the name of the person i idolize the most after our prophet and my dad i want to become like him i wanna have a career as a developer just some of my small mistakes i have to look over thats why i am buying the box
Click to expand...
Click to collapse
buy a USB Jig (you can also make it by your own!) and try if it will work! good luck!:angel:
Mohhamad Rehan said:
no the service centre ppl of a piece of an ass they are giving me a solution of replacing the motherboard i am sure the ppl to whom i have given the phone will repair the issue i have seen the threads on other website i wont mention them i am sure and inshallah they will fix it and about the jtag riff box see dude u mentioned the name of the person i idolize the most after our prophet and my dad i want to become like him i wanna have a career as a developer just some of my small mistakes i have to look over thats why i am buying the box
Click to expand...
Click to collapse
ohhh good luck! Some service centres are just a piece of crap.Its good you plan to buy a riff box it will be very useful in future as well as you can work repairing hard bricked mobiles. Just try and share the progress with us.Hope you fix your device soon..:laugh:
USB jig is the only way to get into downloading mode & what you have experienced is a hard brick. I faced the same issue with samsung galaxy mini and luckily I got the motherboard replaced for free under warranty in service center acting innocent,.
chemicalrage said:
USB jig is the only way to get into downloading mode & what you have experienced is a hard brick. I faced the same issue with samsung galaxy mini and luckily I got the motherboard replaced for free under warranty in service center acting innocent,.
Click to expand...
Click to collapse
But bro I have the only way out the motherboard replacement would cost me a hell amount of money whereas just solving the issue either jtagbox would only cost me 1000 rs I appreciate it concerns bro the service centre ppl have the only way out of changing the motherboard but we as modders have to find a way where as the phone does not belong to me it belongs to my father but I felt a pain in my chest when my father said that I am the only one who can repair the phone and no one else can I decided that I have to prove him right so when the unbrick project is completed on Monday I will surely post the thread of unbrick project in Samsung galaxy advance troubleshoot section I have my own works of roms to release of my phone that is LG p920 to be released on 20th but now I have to postpone it for one day I have my own phone to take care of too and am developing a tweaking app for LG p920 and other phones as well so let's see when my projects are done will surely share my experiences with everyone on xda
My Rom is based on stock LG xperia ubuntu and s4 I have been making the Rom since last week and I completed it last night and then bricked my father's device
Sent from my LG-P920 using xda premium
Mohhamad Rehan said:
But bro I have the only way out the motherboard replacement would cost me a hell amount of money whereas just solving the issue either jtagbox would only cost me 1000 rs I appreciate it concerns bro the service centre ppl have the only way out of changing the motherboard but we as modders have to find a way where as the phone does not belong to me it belongs to my father but I felt a pain in my chest when my father said that I am the only one who can repair the phone and no one else can I decided that I have to prove him right so when the unbrick project is completed on Monday I will surely post the thread of unbrick project in Samsung galaxy advance troubleshoot section I have my own works of roms to release of my phone that is LG p920 to be released on 20th but now I have to postpone it for one day I have my own phone to take care of too and am developing a tweaking app for LG p920 and other phones as well so let's see when my projects are done will surely share my experiences with everyone on xda
My Rom is based on stock LG xperia ubuntu and s4 I have been making the Rom since last week and I completed it last night and then bricked my father's device
Sent from my LG-P920 using xda premium
Click to expand...
Click to collapse
Do you have warranty? Why don't you act dumb and say phone do not boot suddenly?
And what did you do with that file, you pushed it to wrong partition?
no i dont have warranty thats the issue and i am not gonna shell out the money for the Motherboard i have booted the phone to download mode just need to download the files to flash for the stock rom for india does anyone has the link
Mohhamad Rehan said:
no i dont have warranty thats the issue and i am not gonna shell out the money for the Motherboard i have booted the phone to download mode just need to download the files to flash for the stock rom for india does anyone has the link
Click to expand...
Click to collapse
sammobile.com or samsung-updates.com
Search in there.
Thank you do all of u need a unbrick thread here
Sent from my LG-P920 using xda premium
Mohhamad Rehan said:
no i dont have warranty thats the issue and i am not gonna shell out the money for the Motherboard i have booted the phone to download mode just need to download the files to flash for the stock rom for india does anyone has the link
Click to expand...
Click to collapse
How can you not have warranty? The phone is barely an year old right? I think it launched in Europe during April 2012 or something.
Grey market purchase?
Sent from my GT-I9070
arkadeep94 said:
How can you not have warranty? The phone is barely an year old right? I think it launched in Europe during April 2012 or something.
Grey market purchase?
Sent from my GT-I9070
Click to expand...
Click to collapse
Bhaiyya I don't have the bill
Sent from my LG-P920 using xda premium
I am pleased to say that I have finally repaired the Samsung galaxy advance by myself using the jtag box and flashing a European version of the stock GB maybe vdjl1 can someone help me I want to upgrade it to jellybean or ics
Sent from my LG-P920 using xda premium
Use this guide
http://forum.xda-developers.com/showthread.php?t=2198341
Sent from my GT-I9070 using xda premium

Categories

Resources