Database Develop

[ROM] [NANDROID] Stock 2.3.4 Rooted

Hi all,
Here's a nandroid backup of Stock 2.3.4 (GRJ22) rooted from my GT-I9020T. Just extract the zip and place the folder that's inside the zip into the /sdcard/clockworkmod/backup folder on your phone. Then reboot your phone into recovery and restore the backup that says "Stock_2.3.4_rooted"
I've only tested this on my phone but hopefully it should work for you. You may want to install Busybox after.
NOTE: the zip that you download contains another folder within it so when you extract it, make sure you use the folder inside and not the actual extracted folder.
DOWNLOAD:
http://www.mediafire.com/?a8cia8hxn3h7kcr
MIRROR:
http://dl.dropbox.com/u/17007111/Stock_2.3.4_rooted.zip
Thanks to ChainsDD for superuser access and Google for Android

Finally, thanks a lot.
FYI, restoring boot.img and system.img is just okay.

thx, someone tested this with ther european SLCD I9023 version?
If not, i am downloading atm. I´ll give you some feedback later, much later DL only with 56KB/S ?!?

With Nexus S ROMs, do they differentiate between i9020T and i9020A? I have a i9020A.

I can't download from mediafile it said can't access from server can someone make mirror to the other web.
thank you.

ok, tested it, works with SLCD version from germany I9023

anyone tried it on i9020A ??

ok in the i9020t

Will this update the radio also?

lnjryan said:
Will this update the radio also?
Click to expand...
Click to collapse
No, but this will http://forum.xda-developers.com/showthread.php?t=1060192

Uploading to my dropbox public folder now, may take a while though as i live in Barbados and the internet here SUCKS compared to other places. 1Mb download and 256k upload so it's probably gonna take about an hour. Will post link when done.

bajansurfer said:
Uploading to my dropbox public folder now, may take a while though as i live in Barbados and the internet here SUCKS compared to other places. 1Mb download and 256k upload so it's probably gonna take about an hour. Will post link when done.
Click to expand...
Click to collapse
Use this just for emergency: http://xeph.iptime.org/Stock_2.3.4_rooted.zip

iamxeph said:
Use this just for emergency: http://xeph.iptime.org/Stock_2.3.4_rooted.zip
Click to expand...
Click to collapse
Thanks man, upload should be done soon.

dropbox mirror is up
http://dl.dropbox.com/u/17007111/Stock_2.3.4_rooted.zip

with this backup you could restore the original recovery and block the bootloader? mother is recognized by google for future updates?
thanks

working good on the i9020T

Hi When I hear what you talk about I don't understand even model or radio but I just interest to update for use gmail video so I update mine from the file of this post everything work fine and my Nexus 2.3.4 already.
but the other file I don't know what is that and how to do. I am beginner.
thank you for the guy who sharing this. and will be thankful if can someone tell me what should I do next or what should i be careful. Thank you.
here is my screen

pairushletts said:
Hi When I hear what you talk about I don't understand even model or radio but I just interest to update for use gmail video so I update mine from the file of this post everything work fine and my Nexus 2.3.4 already.
but the other file I don't know what is that and how to do. I am beginner.
thank you for the guy who sharing this. and will be thankful if can someone tell me what should I do next or what should i be careful. Thank you.
here is my screen
Click to expand...
Click to collapse
What other file do you mean? The other link in the original post is just a mirror. They both download the same file. You either choose one or the other. Glad it's working for you!

How do i tell which model Nexus S i have. Under baseband version it says I9020XXJK8.
Is this I9020a or T or whatever.. thanks!

twerk said:
How do i tell which model Nexus S i have. Under baseband version it says I9020XXJK8.
Is this I9020a or T or whatever.. thanks!
Click to expand...
Click to collapse
Open the back cover, You will find the model written on the case
under the battery.

[Bell 0.37.23] DEVS ONLY (Gingerbread OTA)

WARNING: DO NOT FLASH THIS ON ANY PHONE​
IT CONTAINS A NEW BOOTLOADER THAT WILL HARD BRICK YOU AND NOT FEEL GUILTY​
All of the credit belongs to devs. Samcripp for setting up Project Cheesecake, the effort to find as many international builds as possible located on cloud servers. Navalynt for cloud test CWM mod. Tenfar for CWM bootstrap. Nate_benji for retrieving the update and uploading it for development purposes.
samcripp said:
SUCCESS
I have in my position a full OTA update. This has Bell GB, but no unlock and it also has the new dreaded ap20 BL, thats been hard bricking ATT phones when people try to sbf to older builds.
Click to expand...
Click to collapse
This is what we know so far about the build. I'm making this thread only to supply the link for the update so that hopefully we can start figuring out how we can use it (if at all). 2nd-init is a possibility, and sifting through the folders might yield to some breakthroughs.
Before I supply the link I want to remind everyone not to flash this on their phone.
Link:
Nate_benji's Megaupload
Multiupload link
Folders in root:
META-INF
patch
preinstall
recovery
system
webtop
ap20bl.img
bp.img
cdrom
cdt.bin
logo.bin
metadata.gpb
Looking forward to see if we can get anything from this, and lastly, thanks again to the devs.

Reserved for devs

You guys realize you can simply use the files to create an update-zip that takes out Motorola's assert checks and bootloader flash?
Very good news!
EDIT: Oops... I forgot that you don't have an unlocked bootloader to work with. It should be a bit more difficult then.

Would it be possible to re-package it with our current bootloader? I imagine this already would have been tried with other updates if it was possible.

D_one said:
Would it be possible to re-package it with our current bootloader? I imagine this already would have been tried with other updates if it was possible.
Click to expand...
Click to collapse
I can't say for sure but what would be great is if we could manufacture a "fruitcake" like package that would leave our BL alone. But once again, we don't have an sbf to fall back to, so we'd need to backup all of our partitions.

kennethpenn said:
You guys realize you can simply use the files to create an update-zip that takes out Motorola's assert checks and bootloader flash?
Very good news!
EDIT: Oops... I forgot that you don't have an unlocked bootloader to work with. It should be a bit more difficult then.
Click to expand...
Click to collapse
Indeed it will be tricky... Is there a way you can help out w/o using an atrix?

Where to download Bell sbf？ U4_0.37.?

cctv35 said:
Where to download Bell sbf？ U4_0.37.?
Click to expand...
Click to collapse
I highly suggest you don't download anything since you clearly didnt read the post
The most important part is that you shouldnt be flashing anything, also, its an OTA

Ok what about this nv flash where you have to have the special cable? Would it be possible for non at&t ATRIX phones to use that method to flash our unlockable bootloader then use the the files from the rom you now have and make a fruit cake? Just theory I don't think I've read of anyone doing nv flash.
Sent from my MB860 using XDA Premium App

*Facepalm ^

Do you guys even have a stock sbf yet? I forget if NFHimself managed to make something crazy for you guys or not. *goes digging for threads*
http://forum.xda-developers.com/showthread.php?t=1059643&page=5
You can just replace some of the files, the rest need to be patched which will be a pain.

Can a dev who has installed this please post some screenshots? I'd love to see how the Bell version of Gingerbread looks!

the2dcour said:
Do you guys even have a stock sbf yet? I forget if NFHimself managed to make something crazy for you guys or not. *goes digging for threads*
http://forum.xda-developers.com/showthread.php?t=1059643&page=5
You can just replace some of the files, the rest need to be patched which will be a pain.
Click to expand...
Click to collapse
What files need to be patched?
Can't all the necessary partitions + system.img be backed up?

IrshaadH said:
Can a dev who has installed this please post some screenshots? I'd love to see how the Bell version of Gingerbread looks!
Click to expand...
Click to collapse
No one has installed this, because it contains the new ap20bl.
I'm pretty sure we'll have a bell-version 2nd-init soon though.

yes setevendeb25 is surely working on something
Magnetox said:
No one has installed this, because it contains the new ap20bl.
I'm pretty sure we'll have a bell-version 2nd-init soon though.
Click to expand...
Click to collapse

kennethpenn said:
You guys realize you can simply use the files to create an update-zip that takes out Motorola's assert checks and bootloader flash?
Very good news!
EDIT: Oops... I forgot that you don't have an unlocked bootloader to work with. It should be a bit more difficult then.
Click to expand...
Click to collapse
Its UNLOCKED now!!! Hopefully someone can create a cwm4 flashable zip for us..

nate_benji said:
Its UNLOCKED now!!! Hopefully someone can create a cwm4 flashable zip for us..
Click to expand...
Click to collapse
Mhm... hopefully sam is able to get us some Fruitcake!

bongd said:
Mhm... hopefully sam is able to get us some Fruitcake!
Click to expand...
Click to collapse
Any idea what Gingerbread build he's basing the Fruitcake on?

nate_benji said:
Any idea what Gingerbread build he's basing the Fruitcake on?
Click to expand...
Click to collapse
He's kindly asked which SBFs he should prepare Fruitcake for (lol that sounded so weird).
I'm pretty sure he'll do it for Bell, French/Orange SBF, the popular ones for sure... man, I'm so pumped!!!

Hi,
Is this the latest Bell GB build?
Can't you just use CWM and edit out the bits in updater that reference ap20bl? And delete ap20bl.img as well of course.
Is there a better boot loader out there that fixes the ram issue? Maybe a swap in would be a better idea.
This OTA is a patch so you will have to be on Bell's 37.23. I backed up all my .23 partitions if anyone needs them. I was able to get back to .23 without unlocked boot header from ORGB using edited French 2.1.1, just removed all fs code groups basically. Fuse still the same though (cat /sys/firmware/fuse/ReservedOdm=20002000200004000) .
Cheers!

[Bell] XT860 Files

Here is a new system/app folder from bell xt860 as the last one had some corrupt apks http://www.multiupload.com/GLZ0KSYI7T
danifunker said:
http://www.multiupload.com/SORQERFAYT
Here is a (rooted) system.img from a Bell XT860
Click to expand...
Click to collapse
bgdwiepp said:
I'll re upload it somewhere for you without a captcha/wait time and probably better speeds.
http://dl.dropbox.com/u/677635/bell_system_app.zip
Click to expand...
Click to collapse
Here is a link to the me863 thread which Bell users have been using to recover
http://forum.xda-developers.com/showthread.php?t=1288823

Thanks -- when I get some spare time, I'll create a thread on recovering a broken XT860 phone using these files and using psouza's tools.

That would be sweet. If you want to post a link in here or link this post in it there would be no need at all for a bell sub-forum. Did you manage to get your phone updated by any chance?

Hey Willis -- Yes, indeed, thank you! Had my phone restored to stock (albeit still rooted). Not being able to get into homescreen had me a little scared there for a bit, but as is well now!

Willis111 said:
Here is a new system/app folder from bell xt860 as the last one had some corrupt apks http://www.multiupload.com/GLZ0KSYI7T
Click to expand...
Click to collapse
I'll re upload it somewhere for you without a captcha/wait time and probably better speeds.
http://dl.dropbox.com/u/677635/bell_system_app.zip

UnhappyDroid3User said:
Hey Willis -- Yes, indeed, thank you! Had my phone restored to stock (albeit still rooted). Not being able to get into homescreen had me a little scared there for a bit, but as is well now!
Click to expand...
Click to collapse
Maybe I'm misunderstanding but you successfully applied the update to your bell droid 3? Could you post a little info on your process? Got a call from bell that my phone is fixed, looks like it was a hardware problem instead of software so I should be able to post a full system image for our phones later this evening.

Flashing back to STOCK JB

Hey everyone, I've got a very serious problem here.
Last week after rooting and unlocking bootloader with motochopper, I tried to swap my external/internal storage.
The partitioning method to mount create a partion and mount worked, but I couldn't replace the mount points of either storage. So i decided to use a scripted method to achieve my goal, that didn't work and I was left with frustration and I ran a script that was supposed to be the last line of the tutorial and my phone instantly went black and I rebooted.
Been stock at AT&T white boot logo ever since.
Trying to use this method HERE but I can't find the stock rom where I need to delete some lines in an xml file.
I have downloaded the BataKang stock AT&T rom but the xml file isn't there and I don't know which way to follow.
I'll have access to a Windows Pc on Monday so am trying to download all required files now and to get the best possible tutorial to flash and return my phone to working other.
Thanks in advance.

Its really hard to find stock firmware for the atrix hd for some reason

LilWonka24 said:
Its really hard to find stock firmware for the atrix hd for some reason
Click to expand...
Click to collapse
Reliable server went down a few days ago. Google moto sbf and you'll find the site
Sent from my ATRIX HD using XDA Free mobile app

palmbeach05 said:
Reliable server went down a few days ago. Google moto sbf and you'll find the site
Sent from my ATRIX HD using XDA Free mobile app
Click to expand...
Click to collapse
Sorry if this is noobish but it just says atrix. Im not sure what model its referring to or if thats important at all.

I have the Mexican Stock ROM. I can upload it, if you want.

Stock firmware request
If someone has stock firmware please upload.

mauchito said:
I have the Mexican Stock ROM. I can upload it, if you want.
Click to expand...
Click to collapse
Yes please upload that mate.
I'd like to keep this phone.

Aingaran said:
If someone has stock firmware please upload.
Click to expand...
Click to collapse
Vally2k said:
Yes please upload that mate.
I'd like to keep this phone.
Click to expand...
Click to collapse
There you go:
https://www.dropbox.com/s/0o0wat2ku..._NII_TA-2-16-release-keys-NII-MX.xml.zip?dl=0
PD. I'm pretty sure that I had answered to this post before... Maybe I'm crazy.

mauchito said:
There you go:
https://www.dropbox.com/s/0o0wat2ku..._NII_TA-2-16-release-keys-NII-MX.xml.zip?dl=0
PD. I'm pretty sure that I had answered to this post before... Maybe I'm crazy.
Click to expand...
Click to collapse
Thanks so much for the upload mate.
Do I have to modify an .xml file with this rom, or is it flash ready?

Vally2k said:
Thanks so much for the upload mate.
Do I have to modify an .xml file with this rom, or is it flash ready?
Click to expand...
Click to collapse
Sorry, I forgot, it's already modified, so just flash directly.

mauchito said:
Sorry, I forgot, it's already modified, so just flash directly.
Click to expand...
Click to collapse
I'll do just that once I get back on the computer.
Thanks for your help mate!

This ROM worked flawlessly, and just want to say thank you for the upload.

Anyone have a link to the stock US version of the AT&T stock ROM? And not the Mexico retail version?

quasihellfish said:
Anyone have a link to the stock US version of the AT&T stock ROM? And not the Mexico retail version?
Click to expand...
Click to collapse
Here you go

ROM needed
Can anyone upload stock roms of atrix hd (AT&T and mexican retail) to mega.co.nz ? all other servers are unreliable and slow in my place.

How to install??
Hello men I am new in this how can I install it, the mexican version, on dropbox??

gnolasco said:
Hello men I am new in this how can I install it, the mexican version, on dropbox??
Click to expand...
Click to collapse
Rsd lite....
Sent from my ATRIX HD using XDA Free mobile app

gnolasco said:
Hello men I am new in this how can I install it, the mexican version, on dropbox??
Click to expand...
Click to collapse
Yes, download and use RSD Lite and flash it. Look up how to do that from the link located in the initial post of the thread.

Thanks
Vally2k said:
Yes, download and use RSD Lite and flash it. Look up how to do that from the link located in the initial post of the thread.
Click to expand...
Click to collapse
Thanks guys!!!!!!!!!

Qinara - Stock Firmwares here..

[Xperia Z2][D6503] Newest Beta System Dump [MM 6.0.1][FW: 23.5.A.1.203]

Hi everyone,
As some of you may know, due to Sony cracking down on the beta program, it's impossible to share the new Beta firmware with everyone. @niaboc79 asked me if I could try to do a system dump and surprisingly, it worked fine with ADB.
I'm not really sure what you guys can do with it but I thought I may as well share it with everyone so you'll find it in the link at the end of this post.
I'm uploading it to Mega right now, it's pretty heavy (over 2 gigs) so please be patient but I should think it'll be ready in an hour or so.
Update: link provided at the bottom of the post
Have fun with it and if it is of any help, I'll post future Beta system dumps if and when they become available.
Link: https://mega.nz/#!pdomjD5a!A6eZ4ZL-59g0P6BdqhVpfnsb83usfJupv-QQtwcVhOs

I thought the .570 was the official version of MM 6.0.1?

NewbieFTW said:
I thought the .570 was the official version of MM 6.0.1?
Click to expand...
Click to collapse
Your username say all... :laugh:

EugenStanis said:
Your username say all... :laugh:
Click to expand...
Click to collapse
Hahahaha totally I used to live in Samsung world, that's why

EugenStanis said:
Your username say all... :laugh:
Click to expand...
Click to collapse
Lol

op updated with link. Enjoy...

jamesbdx said:
op updated with link. Enjoy...
Click to expand...
Click to collapse
Can anybody make a flashable zip of new beta update?

jamesbdx said:
op updated with link. Enjoy...
Click to expand...
Click to collapse
Is there boot.img too?

timoti123 said:
Is there boot.img too?
Click to expand...
Click to collapse
no !!
@jamesbdx we need boot.img bro back it up and upload please.thank you

It will be better if he could back it up as .img files than we can easily flash it. Because it is not so easy to flash system folder. But maybe it isn't possible I don't know. I'm now trying something but it probably won't work.

Who has an idea for stamina mode xperia x settings. The Xperia Z2

Any tutorial how to install without root ? This rom have Polish language ?

Then you can install with ADB?

Z2User said:
Then you can install with ADB?
Click to expand...
Click to collapse
Now i have CE1 5.1.1 official rom. Any video tutorial ? I dont have experience with adb.

WolusPL said:
Now i have CE1 5.1.1 official rom. Any video tutorial ? I dont have experience with adb.
Click to expand...
Click to collapse
Not some tutorial or something to install it, it was a question, as he mentions that works with ADB

Why do you guys keep posting these questions in development section? Its clearly written that its a system dump from the new Beta update.
ITS IS NOT A ROM, this is not ready for users to flash, this is a dump for developers to work with and hopefully create a working flashable ROM.
Please dont spam and wait for a flashable version.

People just dont like to read op or comments,anyway this will probably go out of beta in a week or two,same as last update did.Why such haste then,just dont brick your phones guys by trying to get this FW in weird ways,there will be a flashable soon

I don't know if it's possible to extract the boot.img without su privileges, if it is can someone provide me with how to do it and I'll gladly help.
And yeah, it's pretty obvious that this isn't a rom but it's harmless in the sense that in the current state, nobody can actually flash anything accidentally and brick their phone. So, I'm leaving it up as it is and people can do whatever they want, I'd be happy if a rom could be made out of this but I certainly don't pretend to have the skills to do it myself which is also why I'm only sharing what I can.

jamesbdx said:
I don't know if it's possible to extract the boot.img without su privileges, if it is can someone provide me with how to do it and I'll gladly help.
And yeah, it's pretty obvious that this isn't a rom but it's harmless in the sense that in the current state, nobody can actually flash anything accidentally and brick their phone. So, I'm leaving it up as it is and people can do whatever they want, I'd be happy if a rom could be made out of this but I certainly don't pretend to have the skills to do it myself which is also why I'm only sharing what I can.
Click to expand...
Click to collapse
i tried to flash with .570 kernel but the phone doesn't boot up so we need the kernel and i'm not sure if you can backup the kernel without root so i hope if someone can help in this.

EugenStanis said:
Your username say all... :laugh:
Click to expand...
Click to collapse
Lol