Database Develop

[Q] Bad flash or what?

Hello! Yesterday, for the first time of my life, I flashed an android phone, my sgs! Now, the thing is, I really wanted to flash because from kies I couldn't see the last samsung update, I had I9000XWJFD and it said "updated firmware, no more updates" or something like that. And I really wanted the I9000XWJM5. So I decided to flash it using Odin.
What I did was at first flashing just the PDA, without modem and csc. Then I put the samset rom, but I had lots of problems. Also I thought all my programs would be gone, instead they were all there (cool). But the market wasn't working properly and the wifi either. So I reflashed with the option "repartition" in Odin. Lots of problems again.
Finally, after some tries, I was able to have a stable phone flashing the pda and modem files and NO csc (without the repartition option this time). Before that I did the "factory reset" and "cache reset" things in recovery mode and after flashing I restored everything thanks to my precedent titanium backup.
Now to the problem: the phone is working perfectly now, I also did the 1click fixlag patch and it's really flying now...but...when I go to the phone and write "*#1234#" to see my firmwares, it shows:
PDA: *BLANK*
PHONE: I9000XXJM3
CSC: *BLANK*
Now...is this normal? Is this bad? How can I fix it? It was like this everytime I flashed, sometimes all 3 blanks, sometimes I could see the phone part...
Sorry if it seems a stupid question, but before flashing it was normal and now I can't find a way to flash it and show everything again...

if everything else works well, why do you care?
normally you should flash all files pda, modem & csc but it should work in most cases without modem&csc ...

Well, I care because it seems like the flash went wrong...but maybe it's just my anxiety! If someone else has the same problem, let me know!

Questions before flash

Hey guys.
I know this has probably been asked/answered a million times before, but hopefully you can understand me wanting a final confirmation before i risk my £500 phone...I have done a lot of reading around this subject, and and *think* i have my head around the most of it now.
Sorry for the block of text, I have put my actual questions in blue to make them a little easier to spot.
So I have the 16GB Galaxy S from Vodafone UK. It is currently completely stock (not even rooted), and is running the JF3 firmware. The details of the phone are:
PDA: I9000XXJF3
Phone: I9000XXJF3
CSC: I9000VODJE4
The phone is unbranded, and will accept an o2 SIM, so I assume it is SIM unlocked.
I am wanting to try out Froyo on my device, and think the JM8 build is going to be the most appropriate.
Do I need to root/backup anything on my phone first? (I am fine with losing apps etc, and would rather reinstall from scratch anyway).
I have signed up to SamFirmwares, and have downloaded the file GT-I9000_I9000XWJM8_I9000XXJM4_CODE-MODEM, which I believe is the right firmware for my phone and region. I have also downloaded the s1_odin_20100512.pit file, which i *think* is the right one.
I also got the CSC_I9000OXAJM1.tar.md5 file which i think should be the right one. I also have Odin3 v1.3.
Can someone please just confirm these are the correct files for me?
So, all I need to do is:
- Start ODIN.
- Put my phone into download mode.
- Select the Re-Partition box, and make sure Auto Reboot and F. Reset Time are checked.
-Select the CODE file in the PDA box, and the Modem file in the PHONE box.
- Put the CSC_I9000OXAJM1.tar.md5 in the CSC box.
- Press Start.
Am I right to think my phone will now flash?
What are the likely-hood of me bricking/destroying my phone if I follow this procedure?
Again, I'm sorry that you have probably answered these questions a hundred times before, but hopefully you can understand why I want to be sure I'm doing this right .

Before you do anything please check if you CAN access download mode. If you can then its all GOOD! you are spot on and I congrats you on doing your research as many don't. Also PLEASE don't install the Froyo Betas as you can see for yourself (JPH/JP3) that theres ALOT of problems on it especially if you don't know much about flashing. Just wait another week or less for OFFICIAL FROYO as if something does go wrong we can actually get support from Samsung as its OFFICIAL.
Also NO you do not need to root your phone. You can do that if you choose to afterwards with a rom update/custom mod. Or just download the samsung root app from market rooting is very painless.

JM8 is NOT froyo.. It's eclair... (JP# is the currently designated Froyo series, but I suspect the designators may change after it becomes stable to the per-month thing)...
Honestly, at this point of time though, it isn't worth it. Samsung seems to have backported the highmem patch to eclair anyway, and Froyo isn't yet stable. Furthermore, there are reports of people's imei getting corrupted (which is fine if you back up /efs maybe, but it still isn't a safe operation).
Honestly, unless you have a need for the new API's, just wait until it's released (it's expected by the end of the month). And then, to be uber safe, use kies to upgrade.
Although, at this point of time, you should probably upgrade your firmware to a newer version of eclair anyway (using kies), because JF3 is ancient, and plenty of problems were fixed in August.

Thanks for the advice guys. I thought JM8 was a Froyo release. After researching more tonight, it seems the JP releases are less than stable at the minute, so i'll stay away from them and wait for the official release.
I updated my firmware via Kies this morning, and am now running:
PDA: I9000BUJM4
Phone: I9000BUJM3
CSC: I9000GVODJM3
The system seems to be running pretty much the same as before. There is no lag etc and it all runs smooth enough.
The only problem I have is that the software updated has now filled my phone with Vodafone branding. It has the Vodafone start screen, and loads of crappy Voda apps on it.
Is there a way I can remove these? or at least make sure I get a "clean" upgrade with the next software update (would removing the SIM before updating work?

You COULD root your phone and use Titanium Backup to remove the apps you don't want. But in all honesty I say get the latest official rom that your provider has. Be it the old JF3 as when Froyo comes out and you do (fingers cross) get a problem you can get actual support. This moment in time I would recommend you do nothing but go back to JF3 and wait for Froyo. But its your device so upto you

[Q] Trouble going back to Stock

From what I have gathered... this seems to be a problem that only I have encountered, or at the very least something that I have deemed annoying enough that now I have to solve it... but I recently threw Gingerbread onto my i9000, quite successfully I might add, but I decided I wanted to go back to Froyo until the official release of 2.3 comes out of Samsung, since I am a big fan of "stock".
Problem is, every single ROM (I am at ten and counting) always results in Kies telling me that there is no update available. I have been loading only stock ROMs onto my device, so I am a little confused by this, since even the 2.1 firmwares have given me the same message. I know that, when I had Froyo loaded on stock, the message read that everything was up to date or something along those lines. Having that knowledge just means I won't be able to stop trying to put things back to stock until I see that same message again.
Anyone able to shed some light on what is happening here and how to fix it? Ideally I would love to load up 2.1 Eclair, update to Froyo using Kies and then just call it a day.
(PS. on Gingerbread I am getting some weird "static" screen popping up every time I restart... is that normal? I will take a picture and post it into the Gingerbread review forum if I can capture it.)

i was in a similar boat as you, loading 2.3 was no problem but going back is a pain in the ass.
BE WARNED! I spent nearly a day and i know a fair amount about what im doing, i even had to make the USB jig to force download mode at one point (testing different ideas) so be prepared for some issues.
what i did was use odin to flash stock JL2 (9000M bell version here), with 512 pit and a CSC file from another build (sorry i forget), bootloader update repartition clear efs checked. Thats the ONLY thing i could find to get me back to stock without any internal SD error messages.
IF YOU FLASH THE WRONG THING OR THE FLASHING PROCESS SCREWS UP YOU CAN BRICK YOUR PHONE. Read twice, do once.
See if you can find a stock rom for your area, what your phone came with, with the proper pit file and csc file.
Best of luck, you are not alone. I will definately be waiting for a less buggy leak before i switch back to gingerbread.

Kies reads and looks for the correct software for your product code and firmware tied to the supplying network .Once you install different roms you may change those details and Kies cannot find the correct details on your phone to recognise and match it to a firmware .
Spoof product keys and Kies registry patcher posts may help .
jje

Thanks for the quick answers guys... I shall plug-and-chug a bit more tonight and see if I cannot get something to work... then I will be back to post of my success (or failure).

You can use SpoofFw to trick Kies think you are on an official fw, the let Kies do the stock upgrade for you.

Having quite a bit of trouble getting Busybox installed properly, apparently... SpoofFW always starts up with "BusyBox not found. Spoof not possible." I have installed BusyBox a couple of different times from different sources and different versions... nothing seems to work. Am I missing something?
Also, when loading certain ROMs... the phone doesn't seem to register the modem anymore. There is a 2.2 ROM (forgot which) and the 2.3.3 ROM (without Bootloader) which, unusually enough, are the only ones WITH a working modem. Just tried loading up the 2.3.3 ROM w/Bootloader but the modem file from the non-bootloader version, and that seems to work... weirdly enough.
Since I am betting that there will be a "official" update through Kies to 2.3.x at some point, perhaps I will stick with this... since I am using an official ROM, will Kies recognize my phone properly and offer me an update, or has my product code become screwed up?

Wirebrook. I already replied to one of these today. Same happened to me. flashed back to jpu with a view to using kies to upgrade me to jpy but it wouldn't. So flashed eclair jm1 and kies upgraded me to jpy so I suggest that. You'll have to flash bootloader afterwards though as you'll lose 3 button reboot. But don't panic
Sent from my GTI9000 using XDA App, gingerbread 2.2.3 rooted, ADW launcher + gingerbread theme

I am using an official ROM, will Kies recognize my phone properly and offer me an update, or has my product code become screwed up?
Its not an official rom its a Samsung stock rom not the rom that was supplied with your phone . Kies might update it or might not .
You have firmware provided by the original phone seller and product codes hardware id firmware id for that . Kies will see that and update .
But its going to show not the firmware supplied by the original phone seller and tied to product code etc . Then requires you to Spoof Kies for an update .
jje

@Mossy1963
I'll give it a shot this evening... I have the JM1 firmware glaring at me in the face on my desktop right now, though... not sure that worked right the first time.
@JJEgan
As long as it is all "stock" I am pretty much fine with it at the moment. Not too bothered with having it tied to it's specific product code so much, although that would be nice.

wirebook said:
Having quite a bit of trouble getting Busybox installed properly, apparently... SpoofFW always starts up with "BusyBox not found. Spoof not possible." I have installed BusyBox a couple of different times from different sources and different versions... nothing seems to work. Am I missing something?
Also, when loading certain ROMs... the phone doesn't seem to register the modem anymore. There is a 2.2 ROM (forgot which) and the 2.3.3 ROM (without Bootloader) which, unusually enough, are the only ones WITH a working modem. Just tried loading up the 2.3.3 ROM w/Bootloader but the modem file from the non-bootloader version, and that seems to work... weirdly enough.
Since I am betting that there will be a "official" update through Kies to 2.3.x at some point, perhaps I will stick with this... since I am using an official ROM, will Kies recognize my phone properly and offer me an update, or has mys product code become screwed up?
Click to expand...
Click to collapse
That error message its actually wrong, you get it because nv_data.bin could not be found in /efs folder.
This could be due to a faulty flash where Csc was not applied correctly in recovery on the first boot.
Reflash with Odin is the solution.
Sent from my GT-I9000 using XDA Premium App

@Mossy1963
No cigar whatsoever... Kies simply stated there was no update to be done. Oh well.
@LuffarJoh
Tried reflashing... didn't work either.
Aaaaand to make things weird, that sometimes-working Antenna suddenly started working with an Eclair ROM that it hadn't worked before. Then after a reboot... nothing anymore. And now I have flashed the thing back to Gingerbread and what do you know... no more antenna. I would much rather have a working phone as opposed to a "perfect-stock" phone, so it looks like I might have to get an exchange... and perhaps acquire what I was after in the first place at the beginning of this thread anyways.

Hi, I was wondering exactly the same thing after flashing 2.3.3 today. I just like the idea of being able to plug the phone into kies to get a proper release although, I've no doubt the exact same version will be available for download. Has anyone got any useful info ?

Need some advice with i9000M

Hi guys, I know I need to make this short but I want it to be clear anyway. This is crazy I wanted nothing to do with smartphones 3-4 days ago because all the carriers rip us off with huge bills to get them. But low and behold when my cheap flip phone died after 3 years of loyal daily work a friend of mine offered me his Galaxy S i9000m for a good price. Started playing with the device and having a strong software/computer background started having a lot of fun with all the applications and was amazed with the possibilities (Networking, ipcam whatever) that just kept multiplying until I fell upon applications that needed something called gingerbread... Anyways I can tell you I learned a ****load in 48hours...
So I installed Samsung Kies, it found me the update and put it on for me.. (2.3.3 Gingerbread) then the nightmare started. The phone would boot, and would randomly reboot a random number of times until it could finally stay on and this could last from 2-30 minutes. So I thought, I'll just do a factory reset, to realise that its "STUCK" in 2.3.3 once its updated no going back to 2.1 or 2.2 easily.
Started looking around for ways to downgrade, and EVERY SINGLE LINK redirects to these 'mass download' sites that end up saying the firmwares were taken down for copyright issues. So desperate to find something, I fell upon a multiple CSC FROYO 2.2 firmware for the i9000 and was able to flash that in download mode the phone worked fine, except for me being very curious about the fact that I lost the "M" in my model description...
So started reading this thread(Mostly because I had already realised that with this non i9000m rom I had lost the 3 button DOWNLOAD MODE which i Had before) **** : http://androidforums.com/galaxy-s-a...flashing-darky-v9-gt-i9000m-minimal-risk.html
Got it rooted, got clockwork on, never managed to get the voodoo kernel working had errors in CWM.. so I was ready to give up until my eyes caught the
"*#*#2663#*#*
Then click Touch key FW update"
Which I thought would be neat to try.
NIGHTMARE, now BACK and MENU are dead, I understand that this is because I am running a non i9000m ROM and that updating the firmware rendered them unusable.
I came accross a post : http://forum.xda-developers.com/showthread.php?t=869492
Where this problem is adressed, I pretty much understand everything that should be done to get this back on its feet (right now the phone is still working I can use it at least 75% of its functions work except no back and menu)
Where I need your help : I'm not too sure how to attack this the right way, since I can't get into download mode I understand flashing is now more complicated to accomplish and now that I know that I need a i9000m firmware how can I find that...
Sorry for the long post I know I'm a noob here but I wanted to prove I had done all my homework to get where I'm at now seeking help from you guys!
Thanks a lot
Mat

By the way : Galaxy S GT i9000m currently on a 2.2 i9000 rom, my carrier is BELL. (Canada)

So there's no way of updating to 2.3.3 using Kies?
The only thing I can think of is getting a USB jig from ebay, which makes the i9000 go to download mode instantly. Good luck!

Alright, so I used CHECK FUS, and was able to get the i9000m stock BELL firmware YAY
now the help I need is to flash it correctly and find a way to get past the no download mode problem, would be very appreciated,
thanks guys
No, similar minds Sepharite, I also thought of redoing the Kies method, and then going back again if I needed to but now Samsung Kies says "Your device does not support firmware updates through Kies" Wow.. useful app, a samsung native app can't even detect it's own fricking hardware.
Thanks

UPdate : Was able to restore the 3 button "DOWNLOAD MODE" with a little tutorial online. Now I tried flashing my i9000m with ODIN, it flashed all the way and I get a i9000M logo now but it gets to the splash S logo and keeps rebooting never gets into the actual android setup is there something I did wrong?
In Odin all I put was the "BELL i19000m stock ROM" under PDA and wrote it. The device rebooted after flash but there still seems to be something I haven't done right.
Thanks guys

Please help guys, I know some of you out there have got this stuff nailed down!

Did you flash with a 1 file ROM or a 3 file ROM?
Using the UGKG3 ROM that you can fine here:
http://forum.xda-developers.com/showthread.php?t=1102881
Place the 3 files in their respective places (PDA, PHONE, CSC), for the PIT file, select the 512 pit file that should have come with ODIN, connect the phone, wait for ID:COM to turn yellow, and press Start.
That should get you going again. You may get apps that force close, so you'll need to delete the apps data and then reinstall them.

Hey thanks a lot man ya my flash was a SINGLE FILE, I bricked it yesterday trying to flash a different ROM since I had nothing to lose, I just got it working again on the old 9000 ****ty version that my back and menu keys don't work...
Now for some reason the USB JIG doesn'T work anymore after a couple of uses... could something have been damaged by doing it many times?
And your original roms section they are all unavailable due to copyright did you check the links before sending them?

When you say get the stock roms, I was able to get the UGKG3 file, but what about the versions? When I look at the north american section of the 2.2 version
UGKC1/UGKC1/BMCKC1/Sbl
UGJL2/UGJL2/BMCJL2/Sbl
UGJK3/UGJK3/BMCJK3
which one of the three suits me?
Thanks for your help, and if I get this running and go back and update my touch key firmwares with the right "Vibrant / 9000M" roms I should get them working again?
PS : I'm also very preoccupied by the fact that the USB JIG fix doesn'T seem to pop download mode anymore because this version of the ROM that I have has Download mode not working with the 3 button method. :S I wonder whats going on, but basically if I get your ROMS working the first time It'll fix everything but if it crashes then I lose the galaxy haha

Not sure why the USB jig doesn't work anymore. I have a couple and have only tested them on my phone to make sure they work, but they did not work on a Galaxy S II that I tried it on.
I just checked and the download link for the UGKG3 ROM at multiupload (downloading from multiupload), still works (you need to enter the captcha phrase).
The site megaupload was shut down by the US gov't, so that one won't work.
EDIT: UGKC1/UGKC1/BMCKC1/Sbl is the latest Froyo release from Bell. That's what mine and my wife's gt-i9000m phones came with.
She's still running it on hers.

Ok sorry for all these posts, basically when you said UGKG3 you want me to get the 2.3.3 ROM on ? Is that right? What if I Want to put on 2.2 to be sure I have no trouble with it since I'm in all this mess because the Kies update to Gingerbread had my phone in a bad state.
Thanks a lot by the way!

Sorry your post refreshed right after I did mine. Alright cool so I'll try the one you say your wife is running, I had made myself a JIG with a stock Samsung wire, it was working fine with a 300K resistor and I decided to solder it on and then it stopped working after that.... maybe the actual "usb plug" is damaged from the soldering heat I guess I'd have to try another wire, but anyway I'll try to download the 2.2 I just got the UGKG3 3 FILE rom downloaded one of the links did work!
But I'm a little worried about 2.3.3
I'll try to see if i can download the 2.2 first.
I mean basically... these roms shouldn't jam during transfer i Guess

One other thing I see different confusing information, is it important for me to click 'update bootloader" with these stock roms since these files contain an 'SBL' ? Because both times I bricked it was with an "update bootloader checked" firmware update trying to put the ARIES 3 button method fix as a boot.bin and sbl.bin
Fanks..

Files with SBL in the name already have the bootloader included in the PDA file, so "update bootloader" should NOT be checked.

That reassures me, because the only times it did jammed was when the bootloader was checked! THanks a lot blackrose i'll go out and buy another usb cable because I destroyed mine making my JIG. And I'll try yours out. I was reading a lot on another thread and found this one guy who flashed the JL2 one to save his keys instead of the C1 you said your wife was running, whats the main difference between those two and which one should I start with?

Update : I got a new wire, flashed the KC1 version of the firmware, everything goes fine, I did a repartition with the 512 PIT, it reboots the phone, loads all files in a prompt in yellow and there are no errors that appear, the phone reboots after writing 'successful update' and then goes to the galaxy logo and jams there and does the ONE vibrate, PAUSE, 2 vibrate on a black screen forever. The advantage of having successfully flashed a 9000M ROM allows me to have access to my DOWNLOAD MODE 3 button method, but ever since I flashed that 2.2 i9000 XXJP2 (seems its a euro version) off a torrent I found on the web (When I was desperate to find a functioning 2.2 working version) it seems as though it doesn'T want to boot with any other rom than that one, because all the 9000M roms that I've tried so far flash correctly, and the logo actually changed from i9000 to i9000M on the startup, but they just don't boot.. what could be missing it doesn't seem to be much???
Thanks Mat

If any of this can help, the device was rooted, I was following the darky's mod i9000M guide so I had previously installed the CLOCKWORK MOD and that's as far as I got because my eyes caught the FIRMWARE TOUCH KEY UPDATE which ruined my keys.
Could any of this have screwed something that stops my other roms from booting?
Thanks guys I really want to get this phone up and working again as I don't have much money and am afraid I'll have to cancel with my phone company if I just can'T get this running. I am also willing to make a significant donation to whoever can help me.

You in Canada right? Where abouts?
Sent from my GT-I9000 using xda premium

Quebec province

Alright, if this can help anybody my whole problme is solved.
I flashed the ****JL2**** the KC1 did not boot, the JL2 did.
Once inside JL2, I was able to update my TOUCH KEY FIRMWARE *#*#2663#*#* and everything went back to normal
I have no idea why the KC1 does not work, bugs me out.

My gnote issue

hey all,
i'm new to the forums here at xda-developers but i'm in ire need of some advice/help if you would not mind sharing your experience.
Okay the issue.
I have a galaxy note gt-n7000, it will not update via kies or via the phone itself at all for months. I'm from England and i purchased it on contract from carphone warehouse; some vital information about the phone are as follows:
Android version - 2.3.6
Baseband version - N7000XXLPT
Kernel Version - 2.6.35.7-N7000LA6-CL907341 [email protected] #2
Build bumber - GINGERBREAD.XXLA6
CSC - XEU
I have tried several things to fix this such as:
Factory restting everything - the sd card, the phone... No eval.
Attempting to change the CSC to a different one from XEU
Waiting to see if any more updates are as followed
reconnecting/rebotting my phone to ensure the connection is okay to Kies
Another issue of this phone is that it will not download anything from the website such as bus timetable PPFs in which it used to be beforehand, i am completely stumped by it
thanks for your time to read this and hopefully help,
Nozz.
P.S I don't really want to root my phone cause my warranty will void otherwise.

have you updated the kies? use latest version of kies to update it should work.

Since youre factory resetting, i presume you dont care for any data loss... You can go to recovery (turn off phone then press and hold volume up+power+home until the phone turns on) then do the factory reset there... (this is not touch interface.. You have to use volume buttons and the power button to select your option):highfive:
I entrust you to do this since you said youre running 2.3.6 but DONT DO THIS if you manage to get to Ice cream sandwich!!! We can never stop reminding people of this... DONT EVEN DARE to factory reset under settings on a stock Ice cream sandwich n7000..

londoneye said:
have you updated the kies? use latest version of kies to update it should work.
Click to expand...
Click to collapse
+1
This method should work if your phone is still a "virgin"

londoneye said:
have you updated the kies? use latest version of kies to update it should work.
Click to expand...
Click to collapse
Yeah, according to Kies it is the updated version, and i also updated a galaxy s2 with it to ICS the other day...
Will going into recovery mode then factory resetting it work ?
thanks for your help,
Nozz.

Just factory resetted it, and once again it is coming up with it saying it is not possible tp update Via Kies :/
And Kies is fully updated

Also another thing i forgot to mention, the phone wants an update has it says new firmware is available through downloading from the phone then installing that way, however when i try this, it all goes okay, reboots, comes up with the little andriod symbol then it stops at roughly 20%, reboots and says it was unsuccessful, try updating via samsung kies.
thinking of just getting rid of it, but it's a contract.... Sigh.
nozz.

somebody made a program that you can use instead of KIES, it is called Checkfus.
google for it, or search the forum, i am sure you will find it.

Nozz360 said:
Also another thing i forgot to mention, the phone wants an update has it says new firmware is available through downloading from the phone then installing that way, however when i try this, it all goes okay, reboots, comes up with the little andriod symbol then it stops at roughly 20%, reboots and says it was unsuccessful, try updating via samsung kies.
thinking of just getting rid of it, but it's a contract.... Sigh.
nozz.
Click to expand...
Click to collapse
Hi there,
I would suggest not to update more on Kies as Kies sometimes KIES(OTA OR the PC one) is quite not more reliable sometimes, sometimes you can upgrade sometimes you can't.(Just like a woman on her monthly periods )
Anyway, I would you recommend by just flashing it thru PC ODIN. Download your stock ICS software from this page -> www.samfirmware.com and look for the firmware on your region. Flash it and you should be good to go.
:good:

i'm quite new to flashing phones, i've flashed computer motherboard bios, but i can get inside them and change the mobo if it goes wrong however i cannot do that with a phone :/
Which one is safe for my phone, considering it's current build etc?
Advice would be appreciated.
I can't seem to find firmware that is suited for my PDA, CSC and Phone codes... Or will any UK firmware work?
Nozz.

Nozz360 said:
i'm quite new to flashing phones, i've flashed computer motherboard bios, but i can get inside them and change the mobo if it goes wrong however i cannot do that with a phone :/
Which one is safe for my phone, considering it's current build etc?
Advice would be appreciated.
I can't seem to find firmware that is suited for my PDA, CSC and Phone codes... Or will any UK firmware work?
Nozz.
Click to expand...
Click to collapse
Here you go bud ->http://forum.xda-developers.com/showthread.php?t=1424997 (courtesy of Doc Ketan, of course)
If you narrow down a bit, there's a firmware for UK there(Carphone Warehouse to be exact)

According to CheckFus there is no such ICS update for my specific phone, aka pda/phone/csc.... hmm... and also i can't seem to find any roms for my specific phone either...
I really don't know what to do now
Could someone take alook at my numbers in my first post and help me, as i'm pretty much at the end of my tether with this phone
i'll relist my phones information:
PDA: N7000XXLA6
PHONE: N7000XXLPT
CSC: N7000XEULP4
Build Info: Friday, January 20 05:38:08 KST 2012
That build info looks slightly dodgy considering this is supposed to uk phone, and i'm pretty sure UK gingerbread didn't come out at that point... hmmm.. got me thinking.
anyhow
Thanks,
Nozz