Related
So I just got a refurb tab from AT&T for 200 bucks. It works fine but I want to root it and install some cfw but it is comically locked down. The allow untrusted sources button just isn't there, usb debugging is greyed out, and that Kies software wont recognize the phone no matter what I do.
Also, the 3g is really spotty on it, but that is besides the point.
Any idea what I can do here? I want to install the Overcome rom but it is hard to start if I can't get past steps 1, 2 and 3 due to the nature of my Tab! This will be my first time playing around with rooting an android device fwiw. I own an IDEOS which I use for my phone and that was my first android device a month or so ago.
I got this tab as well and have been able to root and flash Overcome GB without any problems.
For the Kies software, you should download and install it first before plugging it in. Once its installed, you can plug it in and the drivers should be installed. At first, Kies won't recognize it, so you might have to restart your computer for the drivers to work. Once the drivers are installed, you should be able to use SuperOneClick to root then follow the overcome instructions to flash.
How about the bootloader? It says to check if it is locked down but I can run the apk in my tab. Any ideas?
You should root the tab first and use SuperOneClick to do the non-market apps fix. If the root and non-market app fix is successful, reboot your tab and it should allow apps from unknown sources. From there, you should be able to download and run the bootloader checker apk then follow the overcome instructions to flash.
So I got it flashed and set up. Works great. But not my 3g that was kind of off and on just won't work at all!
Fantasysage said:
So I got it flashed and set up. Works great. But not my 3g that was kind of off and on just won't work at all!
Click to expand...
Click to collapse
If you're on the $15/mo prepaid plan you'll need to adjust your APN settings:
http://forum.xda-developers.com/showthread.php?t=1083173
Just got my verizon galaxy tab 7 today, did a bunch of reading to find the best way to root my tab but nothing works. Cant use superoneclick because its cannot connect properly to kies. The newest version of z4root crashes into force close. From what ive read it has something to do with a eco2 update which ive confirmed my tablet has on it. Its currently running 2.2 android, any suggestion how to root this bugger ??
I have a Verizon tablet as well, and I used Superoneclick (PSneuter option) without bothering with Kies. It worked just fine for me. Just make sure that you have the proper drivers installed ahead of time. In my case, my tab came with drivers, and they were sufficient. To access them, plug in the tablet (make sure debugging is off) and you should be prompted with an autoplay by windows. Alternatively, Oldmacnut has a thread going in the development area for a 2.3.4 rom for the Verizon tablet that he released, and which comes rooted.
Seamus1 said:
I have a Verizon tablet as well, and I used Superoneclick (PSneuter option) without bothering with Kies. It worked just fine for me. Just make sure that you have the proper drivers installed ahead of time. In my case, my tab came with drivers, and they were sufficient. To access them, plug in the tablet (make sure debugging is off) and you should be prompted with an autoplay by windows. Alternatively, Oldmacnut has a thread going in the development area for a 2.3.4 rom for the Verizon tablet that he released, and which comes rooted.
Click to expand...
Click to collapse
Before i read your reply i was able to get it rooted with the newest version of superoneclick 2.1.1 and the drivers installed by kies. Even though kies doesnt show a successful connection it still works. Sorry to waste bandwidth ! thanks for the reply though Seamus !
Hey thats great I have the same problem with rooting my Tab VZW I will try the new version of superoneclick 2.1.1
Thx
I don't run any roms just root. I received the OTA update lastnite and without thinking, I allowed it to update. I usually use SuperOneClick but that doesn't seem to work with this update. I have searched high and low and can't find any information on rooting this. Any help is appreciated.
SOLVED. I reverted to SuperOneClick 1.7 and used rageagainstthemachine and it worked after a reboot. zergRush in 2.2 doesn't seem to work against this update.
SuperOneClick 2.2.2 Will Work With FRK76 if...
I took the rageagainstthecage exploit file from SuperOneClick 1.7 and placed it in the "Exploits" sub-directory of SuperOneClick 2.2.2 and it worked as well after a reboot. Note: You'll get a warning message about it's incompatibility with Android 2.3 + (not an issue as FRK76 is 2.2.3)
Don't know what the above means
Does 2.3.1 work without modification?
While I still have my 2 year old droid, I don't have my windows computer any more. Is there any way to do this with a Mac?
Noob needing help
sir_lunatic said:
I don't run any roms just root. I received the OTA update lastnite and without thinking, I allowed it to update. I usually use SuperOneClick but that doesn't seem to work with this update. I have searched high and low and can't find any information on rooting this. Any help is appreciated.
Click to expand...
Click to collapse
Good day, I've scoured the xda dev & android forums, and haven't been able to come up with a resolution to this: I let the OTA [FRK76 - 2.2.3] update slip through, and now i'm having issues rooting.
Besides the fact i'm running linux, i refuse to use any of the one click methods.. Would rather root manually so i know what's happening.
I'm running Ubuntu & doing this all through ADB / terminal, following the instructions listed in android forums [Rooting the Droid without rsd lite up to and including FRG83D], i get to step 13 and i still see the $ & not #.
As there anyone out there who can assist?
Thanks much in advance!
sir_lunatic said:
SOLVED. I reverted to SuperOneClick 1.7 and used rageagainstthemachine and it worked after a reboot. zergRush in 2.2 doesn't seem to work against this update.
Click to expand...
Click to collapse
how does one get an older version of SuperOneClick 1.7?
envoy510 said:
Does 2.3.1 work without modification?
Click to expand...
Click to collapse
As per i know it does not.
Pete has a stock rooted FRK76 Rom on his website, fyi
My D1 seems remarkably resistant to rooting. I downloaded SOC 2.3.3, added rageagainstthecage to the exploits folder, and it still won't even really get to the "Waiting for Device" command. It kills/boots the ADB daemon then hangs. If I kill one of the ADB processes manually, I can get it to skip the automatic version check and get to "Waiting for Device" but then nothing happens there, either.
Any help (or hell, an alternate rooting method- I'd do it the long way too) would be great.
flukehawkins said:
My D1 seems remarkably resistant to rooting. I downloaded SOC 2.3.3, added rageagainstthecage to the exploits folder, and it still won't even really get to the "Waiting for Device" command. It kills/boots the ADB daemon then hangs. If I kill one of the ADB processes manually, I can get it to skip the automatic version check and get to "Waiting for Device" but then nothing happens there, either.
Any help (or hell, an alternate rooting method- I'd do it the long way too) would be great.
Click to expand...
Click to collapse
The rageagainstthecage exploit works for the FRK76 build, but I couldn't get SuperOneClick to run without crashing, so I just did it manually.
Download SuperOneClick 1.7
Extract, and use the rageagainstthecage, busybox, su, Superuser.apk with this guide: http://forum.xda-developers.com/showpost.php?p=8315805&postcount=2
The only difference is the block device /system is mounted from (the guide says mtdblock3, and I think on the droid it is mtdblock4). Just type `mount` on the command line and look for the line that has /system and check the mount path.
I used superoneclick 1.7 to root a stock frk76.
On a note to new users...if you are on windows 7, I could not get it to work. I had an old xp machine that I downloaded soc1.7 to, when I first tried to run it, my PC posted an error about .net 2.0 framework. I Google, found, and downloaded the net 2 0 framework and it worked instantly.
It did not give me recovery. I used rsdlite and only rsd recovery after I rooted it to install cwm. Once you install cwm go directly to it and flash your new rom.
For me, after I rooted and had a stock rom, my recovery would not survive a reboot. But after moving cm7 and gapps to my SD card, re-rsd recovery. Booted directly to recovery. Flashed. Once booted I went to rom manager and had it reflash cwm recovery again and it never had another issue.
My steps may sound confusing but this is what I did.
I do not have sdk setup completely on my laptop and found this to be extremely easy. It works 100% and supplied no errors. I hope this helps someone else.
Is there a RUU i can run to unroot my phone?
YoungCorruptionV2.0 said:
Is there a RUU i can run to unroot my phone?
Click to expand...
Click to collapse
No ruu on here but you can simply flash an unrooted stock rom and accept updates thru Verizon.
stkiswr said:
No ruu on here but you can simply flash an unrooted stock rom and accept updates thru Verizon.
Click to expand...
Click to collapse
Ah okay thanks for the tip. I'll look in the development section for one
YoungCorruptionV2.0 said:
Ah okay thanks for the tip. I'll look in the development section for one
Click to expand...
Click to collapse
You may be able to find it on rom manager but def can find it on peter Alfonso site
I tried to unlock my bootloader, following various guides, and kept getting stuck on the "Download Mode !!!" part. I just want to install the latest stable version of Cyanogenmod on my phone since the stock ROM is being a real pain for me (very slow and unresponsive).
I have:
Android 4.1.2
Build Number: JZ054K
Software Version: AME-XXX
I read online that you need the Euro firmware to unlock the bootloader, can I flash the euro firmware and will it mess with my service? I'm confused as to how the firmware affects things since I've read conflicting information. I didn't flash my firmware a few hours before trying to unlock, so maybe that's the problem?
Seriously?
There aren't enough threads and guides for you to read already? Everything you need is already out there on this forum so why start another thread just because you are too lazy to search and read for yourself?
I have read around and have tried a number of guides a number of times. They haven't worked for me and I'm just wondering what i'm doing wrong. Even though all the information is out there, I don't have the experience to understand it apparently. I've spent hours trying to figure things out but i keep reading conflicting info and half-explained steps and now I'm just confused and would like a clear point in the right direction.
So, do i need to reflash the latest firmware, wait a few hours, then try again on a full charge? Or do i need a euro firmware? Which guide should i follow?
I've downloaded a few applications and driver packages and whatnot but if those could possibly conflict with each other and cause problems i could work with a fresh OS. I'm running OS X but i have linux VMs and friends with clean windows installs (mine is all sorts of messed up)
eatfoodnow said:
I tried to unlock my bootloader, following various guides, and kept getting stuck on the "Download Mode !!!" part. I just want to install the latest stable version of Cyanogenmod on my phone since the stock ROM is being a real pain for me (very slow and unresponsive).
I have:
Android 4.1.2
Build Number: JZ054K
Software Version: AME-XXX
I read online that you need the Euro firmware to unlock the bootloader, can I flash the euro firmware and will it mess with my service? I'm confused as to how the firmware affects things since I've read conflicting information. I didn't flash my firmware a few hours before trying to unlock, so maybe that's the problem?
Click to expand...
Click to collapse
It isn't a question of firmware, the phone needs to have an unlockable bootloader to be able to be, well, unlocked. Here is a list http://forum.xda-developers.com/showthread.php?t=2181581 of P880 bootloader versions. Follow the guide to check which BL your phone has.
Thats obsolete, all versions can be unlocked afaik, either with official method or by fuse editing. No need to keep sim card in,you just need proper drivers
Oh, OK, I didn't know that. But, even better, OP should not have any trouble, provided he follows the BL unlock guide here http://forum.xda-developers.com/showthread.php?t=2224020
Maybe his BL is already unlocked OR is relocked (meaning can't be unlocked anymore).
Its more likely that his drivers are messed up imo.
The fuse editing method should work for everyone, i recommend you give it a try
So the fuse method would be the "BL-unlock.bat" method on that bootloader unlock forum post? I've tried it before, but I'll try it again. The directions only say to run it, is there anything else I need? Now, since it's a .bat file I absolutely have to run it on Windows, right? Because if so I'll use a friend's computer instead of my windows installation.
What are the necessary installations before I run the file? How should I configure settings on my phone? (like what type of usb connection should it be)
There are a lot of things that people expect readers to know but I'm really not very knowledgeable about standard practices for phone stuff so I really need every step. Thanks for helping!
Since its.bat file, you can open it in text editor to see which commands it executes. I'd still recommend to do it on windows machine, other OSs may work but aren't tested.
You need abd & fastboot drivers, plus drivers for our device. It's been a while since I've done it, but afaik you can get proper device drivers via lg support tool.
Flying_Bear said:
Since its.bat file, you can open it in text editor to see which commands it executes. I'd still recommend to do it on windows machine, other OSs may work but aren't tested.
You need abd & fastboot drivers, plus drivers for our device. It's been a while since I've done it, but afaik you can get proper device drivers via lg support tool.
Click to expand...
Click to collapse
Also, correct me if i'm wrong I only had stock for 2hours, but also stock needs usb debugging to be enabled or adb won't work?
Yep, afaik usb debugging needs to be enabled
When you are fast enough, it is possible in charging mode wihle the carger animation is shown. But you have install adb driver very fast...
So I'm pretty sure I got the bootloader unlocked, I ran the .bat file and it went through everything until the part where it checks to see if my bootloader is unlocked, it just froze forever, so I closed it.
How should I go about checking?
Also, what would be my next step now for installing CM10.1.3? I tried to follow the guide on the cyanogenmod wiki (install_CM_for_p880) (I can't post links yet)
...but ran into problems with pushing it into root with adb. It said I didn't have permissions, so I googled some stuff, but just got myself confused.
Thanks for all the help btw!
eatfoodnow said:
So I'm pretty sure I got the bootloader unlocked, I ran the .bat file and it went through everything until the part where it checks to see if my bootloader is unlocked, it just froze forever, so I closed it.
How should I go about checking?
Also, what would be my next step now for installing CM10.1.3? I tried to follow the guide on the cyanogenmod wiki (install_CM_for_p880) (I can't post links yet)
...but ran into problems with pushing it into root with adb. It said I didn't have permissions, so I googled some stuff, but just got myself confused.
Thanks for all the help btw!
Click to expand...
Click to collapse
you can check your bl status by entering sw mode (phone off, hold vol+ and insert charger) or reeboting into bl (adb reboot oem-unlock)
to install cm steps are:
-install recovery (you can choose either cwm or twrp, it's more about looks than functions)
-download rom zip onto sd card
-install said zip from said recovery, there's no adb involved
Now my personal opinion, I really don't see the point in flashing 10.1, i would go staright for cm11 if i were you
Ok well I think I got things together more or less, eventually I tried to install CM10.1 with the ROM manager app. I forgot to select the options to wipe my data partitions and now I'm stuck in an endless boot loop every time I turn the phone on. I tried to boot from my backup using CWM which I made with the app prior to trying to install, and it gave me an error about an MD5 checksum failing, no matter what I tried. Should I do the factory reset/wipe option with CWM now? What's my best option.
Also why would you recommend CM11 over CM10.1? I don't want to have to deal with a nightly, all this phone stuff is a supreme headache to me.
eatfoodnow said:
Ok well I think I got things together more or less, eventually I tried to install CM10.1 with the ROM manager app. I forgot to select the options to wipe my data partitions and now I'm stuck in an endless boot loop every time I turn the phone on. I tried to boot from my backup using CWM which I made with the app prior to trying to install, and it gave me an error about an MD5 checksum failing, no matter what I tried. Should I do the factory reset/wipe option with CWM now? What's my best option.
Also why would you recommend CM11 over CM10.1? I don't want to have to deal with a nightly, all this phone stuff is a supreme headache to me.
Click to expand...
Click to collapse
Factory reset then get nandroid manager app and see if you can restore your stuff with that
CM11 is bugless atm and performance (imo) is way superior
So after a factory reset/data wipe, my phone just booted into CM10.1 and now that's working. And it looks like all of my stuff on the phone is still there (though of course apps aren't installed and whatnot, that wouldn't make sense). Thanks for all the help!
I tried to find a feature list or something to see what exactly is better about CM11, and found out that "stable" doesn't exactly mean stable for CM, and that it looks like a good idea to update, so I think I will try to update to that. Do you know anywhere that has an actual feature list to show me what CM11 does that CM10.1 doesn't?
Hi all,
I have been hammering away at this one, and putting it on the back-burner, but now, it is really getting to me. Samsung Galaxy Tab Pro 10.1 SM-T520
It has been rooted with ODIN, and shows no problem, (things seem much easier now, as I have re-jigged lots of my old phones using so many more tools, I am not an expert, but can read and search without too much problems) I was very careful to choose the correct file, CF-Auto-Root-picassowifi-picassowifixx-smt520.zip, I have rechecked this step several times, as most of the instructions I found ODIN device ID:COM box should become yellow, when on newer versions it is blue I think, I wondered if I was going mad,
Root Checker Root access granted, all fine. I have Root access. n.
Installed CWM ,latest recovery for a Pro 10.1 wifi, recovery 6.0.3.1 Titanium backup-ed, all ready to go and Reboot and flash a new ROM.. No joy. .. Installed TWRP , same.
When it re-starts it ,shows the galaxy logo, flashes off, then back on, and then fails. Android dead with a red warning , standard recovery KOT49H.T520XXUANAE, all I can do is the usual options:apply update. The only thing I haven't tried is to just wipe all the data. I have a backup of my apps with Titanium Backup on the SD card,I am not that bothered really about much other data if its a pain. I just want control of my device and to try a new ,cleaner ROM(SMT520_GraveD_V3.0)
This has been bothering me for ages, I have read so many posts so am now getting really frustrated I have bought triangle away app. today although I think I sorted that issue early on anyway , but just in case...
Super SU seemed to have vanished so that is back installed
I think I searched and found the Mount/system issue and looked into an issue that lead me to the .system folder, but it is hidden, so I could not find the file it related to. I dont have the specifics to hand as I checked it out at work. I wondered if it is because I have ES file manager, not ASTRO as it said in some of the posts I found.but sure this is a red herring.
I have tried everything..I have a Mac at home and PC at work, I have tried ADB and can see &restart the device etc... so I am connected, first I got the error that it didn't recognise the sideload command. Read up on ADB , looked at the help etc. sideload isn't there as a command, very confusing. But I think I got there one I figured out paths, as of course they are different on a Mac, and possibly more so as I have 2 drives in it, which often confuses me ..grr.
I can of course get into the bootloader, with ON+VOL -, it tells me so far the system is : Official and Knox Warranty Void: 1 which I think is fine, but a chap at work suspected this, but after lots of threads I gather this is normal..
Sorry if long, just thought I should be as clear as possible. I have not really come across such an awkward issue as this , my HTC One was a breeze:crying:
*edit* Just worked out through trial and error, that to use the sideboot command I had to select send via ADB and now with the path /Desktop/SMT520_GraveD_V3.0.zip I was able to send the file but with the following messgae : E:footer is wrong and E:signature verification failed, twice.. So some progress
Thanks !
Just to say after being up waay too long on this, I discovered there is a newer firmware T520XXUANI1_T520BTUANI1_BTU which I may aswell upgrade to first, but of course I cannot do this OTA now As it recognises the device is 'tampered with' *sigh* so gun and games with Odin for Mac tonight, or JODIN3 , just to get the firmware upgrade(which seems to be a jungle of fake download links). before a Rom without bloatware..
I am also not completely clear why, as from another thread about KNOX, as I am basically running stock , without custom recovery.. According to this thread , but I am getting a bit confused now
http://forum.xda-developers.com/gal...neral/knox-warranty-void1-otas-t2996067/page2
Click to expand...
Click to collapse
however this is another story from the ROM install. Apologies
Well. No replies, but I did eventually solve this. Hopefully this can help someone. I am a tinkerer, but I really nearly gave up on this..But this was a cheap second hand tablet ( my first) and I want to see what it can do before I test drive one on my mother who is having nightmares with every Windows laptop I give her!
Once I got to a PC , I had access to Odin3, although it is not available online (apparently to Mac) I could not get it to work due to Java issues (JOdin3 online - brilliant idea but no joy for me so far)
I had the Rom I wanted ( GraveDigger- SMT520_GraveD_V3.0.zip ), the firmware update (T520XXUAOD2_T520BTUAOB1_BTU.zip(i think)) and the unlock file (CF-Auto-Root-picassowifi-picassowifixx-smt520.zip) , non of which I could install in any way , due to being locked out of using a custom Rom bootloader!
At this point I factory reset and cleared the cache( as that is the only options in the basic bootloader!) I also has ADB on the PC so attempted to install the files this way (after messing about using some software to produce the .tar and .md5 files needed for Odin. I tried everything to get this into proper 'bootloader mode' all from scrach again, including trying the adb oem unlockbootloader command, which I would never get to work as I could not get there!
With Odin, I was also again able to flash the firmware update, eventually, and of course had to unlock again. I was curious if I could now use the OTA update, and could not. At some point, in repeating this process( as I think it hung up several times and needed a hard reboot) I had at this point fully wiped the device as I know that is another reason to have glitches and an unstable ROM later.
I think I then tried to check and although T520XXUAOD2 seems to still be the firmware, at some point I managed to get online ( I think some superuser app which I have had to try several may have notified me that KNOX was reset:laugh:When I go to About>Software update it said I had the latest update! Good news!
At this point I had installed both CWM and TWRP again , and thought I would try TWRP.I had tried CWM and the same problem, like a double flash of the Samsung Logo , so I know it had reset !!
THIS TIME I used TWRP ( I thought of trying CWM touch, but its either paid, or I would have to find and ABD the file over I guess) , I managed to re-apply the Root file, Root checker confirmed this , as it had throughout this ordeal!, although apart from ACCESS GRANTED I dont really know what the rest means..Anyway although picassowifi , was still in Device name on TWRP I chose an earlier recovery version to install.- twp-2.7.0.0-picassowifi.img. When I re-booted, I was able to get the TWRP recover image, and install the ROM, I cannot remember if I re-rooted as I was so elated.
I had a few , freezing moments, reinstalling most of my apps through Titanium Backup, I think I just tried to reinstall everything which of was unnecessary, after a hard reset, all seems fine. I checked and the TWRP recovery seems to have stuck. I am not entirely sure how to check about the firmware , but for now I feel this is progress.
Good Luck if anyone found this any use.
Just to add, when you search this ( and probably many other models) you seem to get so many sites, offering exactly the same unlock information, in exactly the same way, many of the downloads seem to take you to many weird and wonderful places. So I tended to look here for downloads if possible. But I had to join SamMobile (which seems a useful site for the firmware upgrade) and trawl all over and assume similarities between other Samsung devices to fully check I was not being an idiot. But this was very odd and I could not find any posts or other workarounds that I did not try. But this new ROM feels lovely and smooth so far, and I now want to look into this tablet further