Database Develop

[HOWTO] root Koodo version of Optimus One P500h 10v

!!ATTENTION!!
THIS INFORMATION HAS BECOME OUTDATED. ​
There are probably newer and easier ways of accomplishing your goals that are now available. Read the entire thread for tips from other people about how to get your phone rooted - their suggestions are likely to be better options for your needs. I will not be maintaining this thread, but I will leave it up as a record for others to read. Good luck!
_______________________________________________
Original Post:
Hi. I had trouble getting my Optimus One from Koodo Mobile rooted. So, here is some info that I hope will help others get through the process a bit faster. I mainly followed the instructions in various threads from XDA, but I needed to do things differently.
!!! REMEMBER, THIS IS INFORMATION FROM A BIT OF A NOOB. I'M JUST TRYING TO HELP.
!!! ALSO, I TAKE NO RESPONSIBILTY FOR ANYTHING GOOD OR BAD THAT COMES FROM APPLYING WHAT IS SAID IN THIS THREAD.
!!! THIS INFORMATION IS ONLY INTENDED FOR USE ON THE OPTIMUS ONE FROM KOODO MOBILE RUNNING FIRMWARE VERSION 10v.
It is probably not worth asking me any questions, since I barely got through the process properly myself.
-----------------------------------------------------------
Drivers
So, first I installed the LG PC Suite software because I think that gets you the USB drivers needed for this phone. I think LG calls it "Download LG Mobile Support Tool to PC" on their support site at:
http://www.lg.com/sg/support/product/support-product-profile-mobile-redux.jsp?customerModelCode=Optimus%20One%20P500&initialTab=drivers&targetPage=support-product-profile-mobile-redux
Telus 2.2 firmware version V10G_00
So, since android 2.2.1 is not rootable on Optimus One, I had to downgrade to android 2.2. I found a link to a Telus version of P500h that is android 2.2 at the following link (make sure you download the one that ends in "V10G_00.kdz"):
http://forum.xda-developers.com/showthread.php?p=12253960#post12253960
Installing Telus firmware using KDZ
I followed steps #2 through #8 from the following link:
http://forum.xda-developers.com/showthread.php?t=875881
KDZ worked well, just so you know.
Rooting
Now I used "z4root" to permanently root. It was super easy (way easier than rooting my MT3G Slide). z4root is NOT in the market anymore so you need to sideload it onto your SD storage, then install it with any apk manager.
This site:
http://forum.xda-developers.com/showthread.php?t=901247
led me to this site, where I downloaded z4root from:
http://forum.xda-developers.com/showthread.php?t=833953
After that, I was all rooted up... finally.
So, I obviously am NOT trying to take any credit for the real efforts made by others. I want to say thank you to all people involved with the links and programs I referred to. I really appreciate what people do for others here at XDA. My phones would not be rooted or other kinds of fun without those people.
THANKS!
-------------------------------------------------------------------------
On a bit of a side note, you might want to unlock you phone too... so you could use it with FIDO, etc. So, I used a site called "mobileincanada". It was $20 and took less than 24 hrs to get the code. I was happy with that.

Nice write-up, I had to follow a similar path. The most trouble I had was finding a firmware that worked.. I ended up using the same TELUS firmware. It works great, much faster than the original Koodo firmware.

Sorry for my question: what is the difference between your P500h and the other P500 devices? is it a branded device with special firmware?
I thought, all P500 can be flashed with every P500 *.kdz (for country) or XDA ROMs
for P500

I wished you wrote this yesterday but thanks. I figured it out yesterday . This is the sickest 150$ phone I have ever had. I get 1100 quadrant score :O

If you want a stock, rooted 2.2.1 (Telus V10S - same as Koodo's stock V10v)
You'll need a custom recovery to flash it: [DEV] Custom Recovery P500/Thunderg
http://zubu.ca/o1/LGP500hAT-00-V10s-TLS-CA-JAN-26-2011_signed.zip

Kwen said:
If you want a stock, rooted 2.2.1 (Telus V10S - same as Koodo's stock V10v)
You'll need a custom recovery to flash it: [DEV] Custom Recovery P500/Thunderg
http://zubu.ca/o1/LGP500hAT-00-V10s-TLS-CA-JAN-26-2011_signed.zip
Click to expand...
Click to collapse
Hi. Thanks for that.
Also, if you want to, feel free to answer any of the questions that come up in the thread. You definitely are better equipped than I am.

i downgraded to 22
rooted
now i want to install the custom fw.
copied both files from the link for custom flash.
and i can't get into adb
device not found
win7 64bit
all the drivers are installed and yet I have yellow ! icon on adnroid single adb platform

i had to manually sign the adb driver on w7 64
using
dseo13b.exe
after signing the driver, adb connects and I loaded custom recovery
I am installing custom rom now.
thnkas.

downgrade
hi im from philippines
i want to downgrade from 2.2.1 to 2.2
can i use the firmware above?
if not can you help me find a suitable fw that i can use here in philippines?
i found some links where dead

leegoon84 said:
i downgraded to 22
rooted
now i want to install the custom fw.
copied both files from the link for custom flash.
and i can't get into adb
device not found
win7 64bit
all the drivers are installed and yet I have yellow ! icon on adnroid single adb platform
Click to expand...
Click to collapse
Ok. I don't really get why you mentioned this stuff.

Taylortron3030 said:
!!! REMEMBER, THIS IS INFORMATION FROM A BIT OF A NOOB.
It is probably not worth asking me any questions, since I barely got through the process properly myself.
Click to expand...
Click to collapse
andy572 said:
Sorry for my question: what is the difference between your P500h and the other P500 devices? is it a branded device with special firmware?
I thought, all P500 can be flashed with every P500 *.kdz (for country) or XDA ROMs
for P500
Click to expand...
Click to collapse
Like I said, I dunno. So, I'm sorry too.

Taylortron3030 said:
Hi. Thanks for that.
Also, if you want to, feel free to answer any of the questions that come up in the thread. You definitely are better equipped than I am.
Edit: Just so you know, it seems the link to zubu.ca is not working. When I clicked on it chrome said "Oops! This link appears to be broken.".
Click to expand...
Click to collapse
Fixed the link

this may be off topic but what are the custom roms that you can flash to p500h? any one tried installing one?

Thank you, I thought I broke the phone when I flashed V10A_00, it wouldn't boot into screen. Telus one indeed is nicer than Koodo's.

peacekeeper05 said:
this may be off topic but what are the custom roms that you can flash to p500h? any one tried installing one?
Click to expand...
Click to collapse
mik_os Gingerbread based on CM7
andy Gingerbread Based on CM7
the following are all froyo
lol
void
darkmoon
megatron prime
and others
I use mik 2.3 beta4, still the best and snappiest with adw launcher o/c to 320 min 768 max.

sorry for the newbie question. i just bought the Koodo version but am on telus network. So should i follow procedure in the first post?

Kwen said:
If you want a stock, rooted 2.2.1 (Telus V10S - same as Koodo's stock V10v)
You'll need a custom recovery to flash it: [DEV] Custom Recovery P500/Thunderg
http://zubu.ca/o1/LGP500hAT-00-V10s-TLS-CA-JAN-26-2011_signed.zip
Click to expand...
Click to collapse
Thanks Kwen! This is very useful - now no need for the kdz updater.
Edit: or now we can keep the Koodo version of 2.2.1 and just root it using Gingerbreak (http://forum.xda-developers.com/showthread.php?t=1044765) - no KDZ needed, no recovery needed (prior to root). Obviously, recovery is still recommended after root.

the only question that i have is where can i GET the stock 2.2.1 for my provider? i'm with Koodo, and i live the custom roms, but i need to flash back to stock to see if i can get my mms working correctly again. and i apologize in advance if this is the wrong thread.

Taylortron3030 said:
Hi. I had trouble getting my Optimus One from Koodo Mobile rooted. So, here is some info that I hope will help others get through the process a bit faster. I mainly followed the instructions in various threads from XDA, but I needed to do things differently.
!!! REMEMBER, THIS IS INFORMATION FROM A BIT OF A NOOB. I'M JUST TRYING TO HELP.
!!! ALSO, I TAKE NO RESPONSIBILTY FOR ANYTHING GOOD OR BAD THAT COMES FROM APPLYING WHAT IS SAID IN THIS THREAD.
!!! THIS INFORMATION IS ONLY INTENDED FOR USE ON THE OPTIMUS ONE FROM KOODO MOBILE RUNNING FIRMWARE VERSION 10v.
It is probably not worth asking me any questions, since I barely got through the process properly myself.
-----------------------------------------------------------
Drivers
So, first I installed the LG PC Suite software because I think that gets you the USB drivers needed for this phone. I think LG calls it "Download LG Mobile Support Tool to PC" on their support site at:
http://www.lg.com/sg/support/produc...rgetPage=support-product-profile-mobile-redux
Telus 2.2 firmware version V10G_00
So, since android 2.2.1 is not rootable on Optimus One, I had to downgrade to android 2.2. I found a link to a Telus version of P500h that is android 2.2 at the following link (make sure you download the one that ends in "V10G_00.kdz"):
http://forum.xda-developers.com/showthread.php?p=12253960#post12253960
Installing Telus firmware using KDZ
I followed steps #2 through #8 from the following link:
http://forum.xda-developers.com/showthread.php?t=875881
KDZ worked well, just so you know.
Rooting
Now I used "z4root" to permanently root. It was super easy (way easier than rooting my MT3G Slide). z4root is NOT in the market anymore so you need to sideload it onto your SD storage, then install it with any apk manager.
This site:
http://forum.xda-developers.com/showthread.php?t=901247
led me to this site, where I downloaded z4root from:
http://forum.xda-developers.com/showthread.php?t=833953
After that, I was all rooted up... finally.
So, I obviously am NOT trying to take any credit for the real efforts made by others. I want to say thank you to all people involved with the links and programs I referred to. I really appreciate what people do for others here at XDA. My phones would not be rooted or other kinds of fun without those people.
THANKS!
-------------------------------------------------------------------------
On a bit of a side note, you might want to unlock you phone too... so you could use it with FIDO, etc. So, I used a site called "mobileincanada". It was $20 and took less than 24 hrs to get the code. I was happy with that.
Click to expand...
Click to collapse
EASY WAY is Gingerbreak APK v1.2
;only takes like 2 minutes.
Sent from my LG-P509 (Optimus T) with Void Gear using XDA App

lol just found out, Gingerbreak 1.2 works fine....

[Q] optimus black 2.3.4 V20E root

hi everyone. im totally a noob. i know that this is an old question pls bare with me. i read sir N00BY0815 tutorial about rooting optimus black. and other tutorials here in the forum, and i ended up on confusing myself how to root my 2.3.4 V20e. can some one clear my mind here? can i just use mr N00BY0815 tutorial, bcuz i cannot see any "V20E" sightings, or is it going to be another tutorial? thanks!!!

"ROOT FOR Gingerbread (V20x, 2.3.x)" means all gingerbread ROMs, so also yours.
I have testet "see v20O" and it works perfectly.
Regards

Just check the 3rd post of this thread and you ll be able to do it on your own

N00BY0815 said:
Just check the 3rd post of this thread and you ll be able to do it on your own
Click to expand...
Click to collapse
thanks for your quick reply. i managed to flash my V20e to V20b. but i cannot Wipe all data/factory reset and flash the super user. i put the unzipped file on the root of my SD but when i try to flash it, the file is no where to be found.

[q] newbie help

hey guys I just got this phone and I would like to know how to root it and is it upgradeable to ics? cause its currently on version 2.1 and its very slow so please help me out

dorian2kx said:
hey guys I just got this phone and I would like to know how to root it and is it upgradeable to ics? cause its currently on version 2.1 and its very slow so please help me out
Click to expand...
Click to collapse
All that you want http://forum.xda-developers.com/showthread.php?t=2057161

thanks mate but I'm on version 2.1 but in ur thread it says, Rooting GT -I9000 2.3.6 [India DD JV7 / JVB]....... should I go ahead with that rooting process still? just wanna make sure cause I really don't wanna brick my phone

on 2.1??
why you are on 2.1???official update is released since ages..just update to 2.3.6 and then follow the same.
this two steps done very carefully
1 when you connect yor phone to odin in download mode the yellow light will be blinked in id:com.
2 put kernel file in PDA only
3 uncheck re partition and just click your device will be rooted enjoy.

I just got the phone yesterday bro....how do I update to 2.3 though, ?

dorian2kx said:
I just got the phone yesterday bro....how do I update to 2.3 though, ?
Click to expand...
Click to collapse
just go in settings and then navigate to software and in that there is "check for updates"
one advice: get some basic information regarding rooting,recovery,kernel etc....i root my phone after doing research for month and then i proceed.here in XDA lots of information available very easily just go through posts and forums.read and re-read then proceed.
if u do something wrong we are here to help you but make sure you know what you are doing.
good luck

thanks man I've already rooted my SG3 , I went into settings but I don't see any option regarding to check for updates .....can it be done via keys

video guide
dorian2kx said:
thanks man I've already rooted my SG3 , I went into settings but I don't see any option regarding to check for updates .....can it be done via keys
Click to expand...
Click to collapse
check out this video in this every detail is mentioned.nice to hear that you have some basic information. Dont write thanks instead of it hit thanks button.
http://www.youtube.com/watch?v=3LV3-7nDEiM

ok I watched the video ,I already have Odin on my PC but the video didn't provide a link to the official 2.3.6 Gingerbread XXJVU firmware bro, do u have a link?

Link is already there in that video please check carefully before posting
Sent from my HTC One X using xda app-developers app

ok the video is kinda blurry on my phone can u please inbox me the link sir

Last time I needed gingerbread I did a simple Google search. There are working links in these forums if you search too.
Don't expect to be spoon fed everything. Do some research like everyone else did instead of just posting all the time.
Sent from my GT-I9000 using Tapatalk 2

ok guys I successful update it to 2.3.6 so I can try to root now?

yes should be good to go :good:
My HOW TO gives you the Root (only if its the version you are looking for) and explains on how to use it)

I tried rooting with that guide he posted above and now my phone won't boot up past the galaxy startup screen

my guide?

dorian2kx said:
I tried rooting with that guide he posted above and now my phone won't boot up past the galaxy startup screen
Click to expand...
Click to collapse
Follow these steps sequentially; safest, tried and tested by over 10,000 people on GT-i9000:
1. Go back to stock: Flashing To Original Rom - Using Odin on GT-i9000
2. Root your device: Rooting GT-I9000 2.3.3 [India DDJV9]
3. Install ICS: Installing Ice-cream Sandwich 4.0.4 On Samsung Galaxy S GT-i9000
4. Install JB: Installing Jelly Bean 4.1 on Galaxy S GT-I9000
ENJOY

@ gopalasubramanium. I'm on 2.3.6 and I used ur tutorial and phone wouldn't start up I had to reflashed

dorian2kx said:
@ gopalasubramanium. I'm on 2.3.6 and I used ur tutorial and phone wouldn't start up I had to reflashed
Click to expand...
Click to collapse
Can you please let me know after which step your phone wouldn't start? Thanks,

I followed ur guide ( Rooting GT -I9000 2.3.6 [India DD JV7 / JVB] ) after I use Odin to install Semaphore Kernal 2.7.4. when it was finished my phone rebooted but wouldn't past the Samsung screen

[Q] Where to start?

Hello XDA,
I have a SGS I9000. I want to root it and I've been searching all day for a guide that isn't a one click root.
But I have a few questions about what everyone is talking about when they say JP2, JP3, etc.
Also, I'm running Froyo 2.2 and there doesn't seem to be much for it. Could someone please point me in the right direction?
if there is information about the phone that can help find where to go, just ask.
Thanks XDA.

savl0n said:
Hello XDA,
I have a SGS I9000. I want to root it and I've been searching all day for a guide that isn't a one click root.
But I have a few questions about what everyone is talking about when they say JP2, JP3, etc.
Also, I'm running Froyo 2.2 and there doesn't seem to be much for it. Could someone please point me in the right direction?
if there is information about the phone that can help find where to go, just ask.
Thanks XDA.
Click to expand...
Click to collapse
Just follow this thread and do whatever you want to do with your GT-i9000...http://forum.xda-developers.com/showthread.php?t=2057161

gopalasubramanium said:
Just follow this thread and do whatever you want to do with your GT-i9000...http://forum.xda-developers.com/showthread.php?t=2057161
Click to expand...
Click to collapse
Is it ok to root when this guide is for 2.3.6 and I'm on 2.2?

savl0n said:
Is it ok to root when this guide is for 2.3.6 and I'm on 2.2?
Click to expand...
Click to collapse
You should 1st flash to 2.3 using odin (https://www.fixmystuff.in/FMS_Forum...i9000-flashing-to-original-rom-using-odin.46/), then root (https://www.fixmystuff.in/FMS_Forum...-i9000-rooting-gt-i9000-2-3-3-india-ddjv9.47/) and then you can proceed installation with ICS (https://www.fixmystuff.in/FMS_Forum...dwich-4-0-4-on-samsung-galaxy-s-gt-i9000.125/) or JB (https://www.fixmystuff.in/FMS_Forum/threads/installing-jelly-bean-4-1-on-galaxy-s-gt-i9000.131/)

gopalasubramanium said:
You should 1st flash to 2.3 using odin (https://www.fixmystuff.in/FMS_Forum...i9000-flashing-to-original-rom-using-odin.46/), then root (https://www.fixmystuff.in/FMS_Forum...-i9000-rooting-gt-i9000-2-3-3-india-ddjv9.47/) and then you can proceed installation with ICS (https://www.fixmystuff.in/FMS_Forum...dwich-4-0-4-on-samsung-galaxy-s-gt-i9000.125/) or JB (https://www.fixmystuff.in/FMS_Forum/threads/installing-jelly-bean-4-1-on-galaxy-s-gt-i9000.131/)
Click to expand...
Click to collapse
I didn't think it was that complicated.
In that case, could you suggest a oneclick application?

http://www.darkyrom.com/index.php?threads/guide-choosing-the-right-flashing-method.3885/
http://www.youtube.com/watch?v=3HECHUBUT0M&list=PLF2A5D99BF6C56477&index=3
http://www.youtube.com/watch?v=1RoZU5ZPMS4&list=UUawwqTCK5egDfXdJe3EH0XQ&index=13
http://www.youtube.com/watch?v=2DLySUtI8vo&list=UUawwqTCK5egDfXdJe3EH0XQ&index=15
check these video guides thats how i learned how to do it but i have to warn you once you start flashing you cant stop haha good luck

oneclick root for the GT-I8190?

hi
im a complete noob when it comes to rooting/flashing roms and stuff on android devices (the sticky was top complicated for me to understand). so can anyone give me a one click root application that works with the GT-I8190 with Android 4.1.2? i don't particularly care much for the custom roms, i just want my phone to gain root access. but if you have a rom that'll improve the gaming performance of my device, then please share it with me. and please it won't brick my s3 mini, won't it? i don't want my phone to get bricked.

Hi, look here : http://forum.xda-developers.com/showthread.php?t=2459910
It worked great for my stock samsung rom.

Hi! Thanks! =D
One thing though, is it safe? I don't want my phone to get bricked. =)

dude help so i rooted my phone but then i wanted to replace that kinguser with superuser so idisabled it with the root app delete app but when i disabled it so i can install supersu my root was gone! what do i do???
Edit: nevermind. fixed it by rerooting it again with vroot. guess im just gonna have to stick with kinguser lol. thanks man =D