Database Develop

[Q] I9000M Can't boot!

Hi, I know the questions have been asked many times, but I did not see any good answers.
I have an I9000M an d I tried upgrading to froyo 2.2. I first tried with Kies, but it wouldn't. It would see my phone, I could add music, add/save contact, but when I upgraded it would just disconnect.
I turned to Odin's method. I had the seemingly frequent problem of it being stuck at "File Analysis" It had been there for an hour or so... So I got it was not working. I then had the bad idea of unplugging it, and now I'm stuck at the screen on boot with a [phone]---[exclamation mark]---[pc].
I can't get into either recovery or download mode anymore (tried with 3 buttons, but wasnt able anyways before, and ADB don't see my device (nor does Odin or Kies).
I tried removing the battery for about a minute and rebooting/replugging, etc. Nothing works.
What can I do more...?
Thanks

alxpowa said:
Hi, I know the questions have been asked many times, but I did not see any good answers.
I have an I9000M an d I tried upgrading to froyo 2.2. I first tried with Kies, but it wouldn't. It would see my phone, I could add music, add/save contact, but when I upgraded it would just disconnect.
I turned to Odin's method. I had the seemingly frequent problem of it being stuck at "File Analysis" It had been there for an hour or so... So I got it was not working. I then had the bad idea of unplugging it, and now I'm stuck at the screen on boot with a [phone]---[exclamation mark]---[pc].
I can't get into either recovery or download mode anymore (tried with 3 buttons, but wasnt able anyways before, and ADB don't see my device (nor does Odin or Kies).
I tried removing the battery for about a minute and rebooting/replugging, etc. Nothing works.
What can I do more...?
Thanks
Click to expand...
Click to collapse
Without download mode (VOL Down, Home, Pwr) then your only options is to either send it in for repair or try to get download mode working with a homemade Jig.
More on that Here.
I heard story's of people of forcing it to go into download mode using heat as well from say a hair dryer. But I do not recommend that.
"I can't get into either recovery or download mode anymore (tried with 3 buttons, but wasnt able anyways before, and ADB don't see my device"
Click to expand...
Click to collapse
Also I'm just curious as how you used odin without even having download mode? I'm having my doubts that when you said I know this question has been asked many times but you have not found a good answer is true. Next time do a bit more reading before just flashing your device. If you have even 1 thing your not sure about when flashing your phone that's 1 to many.

Puzzled also .
First question has to be can you actually get the phone into download mode .
Thats the big yellow download sign .
That has to be your first step get download mode on your phone .
Odin does not work without download mode so if no download mode who knows what you where trying to achieve or did achieve .
jje

No, I could get it in download mode BEFORE attempting to flash. Then I started Odin.
Now, I'm stuck with the image on boot screen and I can't do a thing. Phone is not recognized anymore on my PC so ADB/KIES/Odin won't see it.

alxpowa said:
Now, I'm stuck with the image on boot screen and I can't do a thing. Phone is not recognized anymore on my PC so ADB/KIES/Odin won't see it.
Click to expand...
Click to collapse
Remove Kies and reinstall that will make sure the drivers are OK .
Get into download mode if 3 buttons fail then you need the jig as posted.
Could try removing battery go to three button download mode and as you are holding down the buttons stick the battery back in to see if it enters download mode .
jje

Thanks guys for all the tips...! But nothing seems to work. It's just stuck at the connect error icon (?) and when I try to go in download mode either way, it just loops. (Icon appears and dissappears)
Two more questions:
1) If i have to get it repaired, do I contact Samsung or my provider ? (Bell in this case)
2) I'm at ease with electronics and stuff, so the jig should't be too hard to do for me, but is it guaranteed to work ? I mean, is it software-independant. Is there a problem that I can have that would prevent it to work ?
Thanks again!

Will work. Had the same issue as yours were I could not get into download mode and the phone would not boot either. The jig saved my phone. You can make your own or you can buy it on ebay. Good luck.

Good, should have all that at my job. Will try it.

Finally, it turns out that I called Bell and they told me that this was a common problem with these devices and they are sending me a new one!
Well.. whatever it was! haha
Thanks again for the help though!

Stuck on "Galaxy S GT-I9000" Boot screen.

Hi.
Basically , I Know NOTHING about all this 'flashing' roms and what not. I got this phone from a friend , and was aware that it had custom firmware or something on it. Due to the phone being severly slow , and constantly displaying errors along the lines of "the process com.android has stopped working" when I was trying to call or text somebody , I thought i'd have a play about with some settings in recovery mode thinking this was the way to restore back to custom out of the shop firmware (stupid i know). All I remember doing was clicking through a few menu's in the green text recovery mode screens and clicking "disable lagfix". I then got some form of error at the bottom , and the phone froze. I took out the battery , tried to re-boot it and it's getting no further than the very first screen with the "Galaxy S Samsung" etc etc.
I know this probably sounds stupid to some of you phone wizards on here , but i'd appreciate any help you could give in the simplest terms for somebody who has no clue about this whatsoever. If I was able to fix this , how would I also go about completely making the phone like it was brand new? No custom firmwares or Roms or anything along those lines?
Thanks very much in advance!
Ben.

well, if it kud b that the problem is caused coz u disabled lagfix. you could try re-enabling it and see whether you can get the phone to boot. to do that:
> shut-down the phone completely,
> hold down the VOLUME UP + HOME + POWER buttons simultaneously till the phone powers up and then let go,
> hopefully this will get you beyond the "galaxy S" screen and into recovery mode,
> from recovery mode re-enable the lagfix that you disabled earlier, then re-start the phone and see if it boots properly,
> if it does, shut-down the phone again, come back to recovery mode (as above) and perform a hard re-set (the options should be something like wipe data/factory reset in recovery mode) and restart phone - the general slowness and the errors u were getting were most probably from the apps that were installed in the phone. so, if u get rid of em all n re-install only the ones u r going to need, then this wus solve the issue,
Hope this helps,
Cheers,

HI thanks for your reply.
Im able to get into download and recovery mode. I though enabling the lagfix again would work , however , there is no option to enable it. Just to disable it again as though I never did it in the first place. Ive also tried wiping all cache's and factory restoring the phone , but it's still not going past the Samsung Galaxy S screen.
Any ideas?

how long are you letting it boot up for before switching it back off ? i have a few apps no more than 35. it takes the phone 10-15 mins to boot after disabling lagfix..
if your phone had lots more apps and music pics ... whatever. it could take even longer to convert all files back to rfs.. dont suppose you know what ROM is / was on the phone ?? do you / did you hear a robot voice when the phone boots ??

I've left it for hours. Still no luck getting past that screen. What can I do?
I have no idea what Rom it was , and there was no robot voice.

http://forum.xda-developers.com/showthread.php?t=818556
Via ODin go back to base rom .
jje

Oh wow , lengthy process!
Will try it all and report back to here to let you know how it goes.
Thanks!

Having a problem when I connect the phone to PC in download mode. Odin says "added" when the phone is on the Galaxy S screen , however if i then switch to download mode it says "removed" and wont detect the phone. Same if I have the phone in download mode before connecting.

Bumping for advice.

Benjiee said:
Having a problem when I connect the phone to PC in download mode. Odin says "added" when the phone is on the Galaxy S screen , however if i then switch to download mode it says "removed" and wont detect the phone. Same if I have the phone in download mode before connecting.
Click to expand...
Click to collapse
have you done a full factory reset in recovery mode ?? its strange whats happening to you. as if the phone can get into download mode then theoretically Odin should see the phone...
if you can get into recovery mode use every option to wipe the phone.. e.g full factory reset, wipe cache, wipe dalivk cache, then try again and post back
EDIT: also you could try format sd card (internal) this way there wont be a single thing left on the phone that could cause issues...

Odin wont recognise the phone when it's in download mode , only when it's on the boot screen.
I've factory reset it , wiped caches and formated the internal SD card. Still no luck getting past the Galaxy S Screen.

Open Odin select files .
Go to download mode on phone you should now have a big yellow icon
Connect usb cable
First block on Odin lights up press start Odin runs goes to blue phone reboots .
Is that your sequence of events ??

No.
The phone isn't recognized by Odin when it's in download mode , so i'm not even able to start the flash.
I open Odin ,
Select the Files ,
Put phone to Download mode and connect USB ,
Odin dosn't detect and block dosn't turn yellow.
However ,
It IS detected and turns yellow if the phone ISN'T in download mode. Soon as I switch to download mode , Odin says "Removed" and the yellow icon dissapears.

Can you get to download mode without connecting to Odin
heimdall might be an option
http://forum.xda-developers.com/showthread.php?t=755265&highlight=heimdall
jje

Unable to start the flash on Heimdall also , as it wont find phone.

I am lost wont find phone is usually a USB problem/USB drivers .
jje

The computer makes the usual Beep noise when plugging in a USB device , so it's obviously being detected. It just wont show up in ODIN when in download mode.

My next step would be to remove Kies and any Samsung Drivers .
Then reinstall Kies so you are 100% sure drivers are ok .
jje

All fixed now.
Used a USB port at the back of the computer , and it then worked fine with ODIN for some reason. Re-flashed original firmware and phone is now running much smoother than previously.
Thanks for all your help.

NEED HELP!!! Screen black!

I have a big problem! i wanted to flash with Heimdall... I tested a rom, but not satisfied, i wanted to test another one and my Samsung Galaxy Tab don't want to turn on...
No Samsung logo, No Galaxy Tab logo... Nothing! Like the Samsung Galaxy tab don't want to turn on when i push the ON/OFF Button!!!
What can i do???
Please help!

Please HELP!

EmryX said:
Please HELP!
Click to expand...
Click to collapse
If you're able to provide information as to exactly what you did to get your device in this state that would be immensely helpful in regards to diagnosing the problem. However you'll probably be able to recover your device using a custom jig.

I can not be more explicit. I wanted to try a rom. Wasn't satisfied so i downloaded another one (with cache file, database file, bootloader, etc... ) but the file have been dowloaded too quickly (i think the zip file was corrupted...)
So i did the flash, and my tab don't wake up. I don't have a brick state (with the usb and pc logo). I don't have the samsung/galaxy tab logo. Ihave nothing on my screen. Like my on/off button was broken...
And whatever i do(like the combo on/off with the volume down), my computer don't recognize the tab. So i can't flash it again.

EmryX said:
I can not be more explicit.
Click to expand...
Click to collapse
Well you're going to have to be if you want anyone's help.
What files did you flash? Which software did you use? Which version? Were you given errors? How did you flash the files?
Please provide a detailed step by step run-down of exactly what you did.

I can't remember, and i'm french, i can't find the right word to explain the situation...
I flashed my tab with HEIMDALL (the last version on the website) i think the problem is when i wanted to flash with the file EURO.pit (i choose this file in the "bootloader" category of the software HEIMDALL).
The problem... My computer can't recognyze the tab because i can't turn on the tab, so... I don't know what can i do.
EDIT: And HEIMDALL don't tell me any error. Just "Flash Complete, Rebooting"
EDIT 2: I think i used the wrong bootloader...

Up?
What can i do? Is a batterie problem?

Let your Tab charging for 5 Hours and then try again.

Sounds like you've flashed a bootloader not designed for your tablet. Luckily all Galaxy S devices store a backup copy of the secondary bootloader which is utilised when a certain resistance is detected on the USB port. You can send it off to Samsung and they'll repair it, but they might charge you. The other option is to build your own custom jig which will activate the backup secondary bootloader.

now ive got the same problem. i tried a custom recovery i found in the "bible" sticky...clock work wasnt working when i was doing adb commands. the recovery i tried is called 3e. all it would do is reboot, t-mo logo and then bootloader words would flash very quick and black screen (backlit) press the back button and i got the triangle droid.
then i got it to go into download mode and tried a rom with odin this is the rom if it helps
GT-P1000_P1000XXJME_P1000OXAJME_P1000XXJMB_P1000XXJME_XX_ITV.zip.enc
unzipped, selected in pda and clicked start. failed at the last second and the downloading android screen on tab was stuck so i powered it down.
stupid stupid stupid!
now it wont turn on period, i get nothing from usb connection or secret button presses.
ill try the "rig" tomorrow, but how will i hack up this galaxy usb to work? the guide says micro usb but obviously thats for a phone.
please help if you can, i just got this thing today

@Benjamin: I can do a custom jig for a galaxy tab?
EDIT: But i don't think the jig will help me..
"If your phone screen is always black, that is it does not display the white Galaxy S/Samsung/AT&T logo when you switch it on, then sorry, this jig will not help you. "

HELP please? Can i do a custom jig for the galaxy tab? And How?

press and hold the power button for 10 second make sure it totally off
then try to enter download mode
if u are able to enter download mode
flash roto jme v4
if it a battery problem
i think it may be battery flat, try plug it in to the charger see if it work after 10 min

suprajztwenty said:
now ive got the same problem. i tried a custom recovery i found in the "bible" sticky...clock work wasnt working when i was doing adb commands. the recovery i tried is called 3e. all it would do is reboot, t-mo logo and then bootloader words would flash very quick and black screen (backlit) press the back button and i got the triangle droid.
then i got it to go into download mode and tried a rom with odin this is the rom if it helps
GT-P1000_P1000XXJME_P1000OXAJME_P1000XXJMB_P1000XXJME_XX_ITV.zip.enc
unzipped, selected in pda and clicked start. failed at the last second and the downloading android screen on tab was stuck so i powered it down.
stupid stupid stupid!
now it wont turn on period, i get nothing from usb connection or secret button presses.
ill try the "rig" tomorrow, but how will i hack up this galaxy usb to work? the guide says micro usb but obviously thats for a phone.
please help if you can, i just got this thing today
Click to expand...
Click to collapse
almost the same thing happened to me. how ever mine will not turn on at all. it gets warm when it charging and then cold when the battery is dead. i have it sitting until it drains.
i am waiting to hear from Samsung. I will keep you posted.

Can anyone out there help. I tried to load overcome's rom and it passed all the steps, and then the screen just went dead

Try to power on together with volume down bro. Lets see if the android image with broom will pop.
Sent from my GT-P1000 using XDA App

[HELP] Flashed ICS, now, no download mode, no recovery, no turn on...

First, ICS, work very well.
The problem is when i go to recovery menu, in all options say "can't mount.... log" or something
And when i go to run ICS in the display only appears "SAMSUNG GALAXY S", an don't boot, and i flash other recovery with Download mode in odin and the same message, "can`t mount...."
suddenly the phone don't turn on.
Now the phone can't turn on, can't enter in download mode and recovery menu.
And i tried JIG, and don't work...
Any Idea ????

hallo i also sent you a PM
did you tried the hardware dongle ? it's a little USB plugin, modified that take your phone into dowload mode
i solved with that some month ago

Any idea ???

Indeed maybe you could try a usb jig, weird that it wont turn on..

I've seen this issue once after a failed Kies update. Unfortunately nothing helped to revoke the phone... Not even the JIG :-(
We were fortunately able to get the device replaced by Samsung.
As this has happened with a non warranty destructing update provided by Samsung you may be able to pretend it happened during a Kies update to get the device replaced.
Good luck!

Are you sure that your phone didn't just run out of battery?

gt s5570 ( Unknow Bricked )

I just want to ask if there is any way to unbrick my gt s5570. Its been flashed with a s5570i recovery ( By frustration ). No recovery mode no download mode the only and only way to get it detected by pc is to use volume up+home+power.
Odin always gets stuck at "setup connection" while flashing the stock rom every time.
What i have tried ?
Every button combo that exist nothing works result is always only switched off cell.
Pc detects it correctly only with voulme up+ home plus + power
Odin always gets stuck at setup connection while trying to flash.
Pressing the download mode buttons with the mobile connected to pc and insert in the battery also doesn't work.
Why i flashed it with a wrong recovery ?
Searching for the CWM 4.4.x.x i got frustrated i couldn't find it any where( spend a day almost ) finally saw one for s5570i installed it ( I though what can go wrong i have odin and download mode ) and after restart its bricked.
Why i still have hope ???
Its detected by a computer there " is " a way to make it work again and i mean it but it might have not been founded yet.
Any SD card hack that might help me boot it and recover it ??
Any any method just tell me to try EXCEPT JTAG.
I have been on xda since 2013, not as a member but i have been flashing this little thing with every CM rom that comes out with the help of xda forum.
I am not a mobile freak but i try modifying every thing i own every thing.
What i have learnt is that recovery mode is like bios and ROM is like windows as simple as that. Don't play with bios do whatever u want to do with windows.

I think jtag is the only way . Have been searching on internet for 3 days non stop but for wrong recovery zero solution are online. Except if someone works on a new solution