Database Develop

[Q] Need Help! Updated to [ROM] I897UCKH3 [Android 2.3.4] lost USB Port

used to update to 2.3.4 http://forum.xda-developers.com/showthread.php?t=1232703 and worked fine. Now I can not get to download mode or recognize USB to in any program on Windows 7 64 bit . I will not show charge screen or find it self.
I got battery to charge on wall charger but will not threw computer and only with phone on not off. I have checked several USB ports on two separate computer. I can get to recovery screen but not Download screen
Update
I had to jig boot that did not work as everyone has shown. It would not go to download screen till I took out battery and then held down volume button inserted USB cable then inserted battery back then went to screen.
I would still like to update to 2.3.4 but after the trouble I had I think I will wait awhile. And Thank All That Tried to Help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Phone is a Samsung Captivate Model Samsung-SGH-I897 Running with Kernel 2.6.35.7 I897UCKF1-CL273832. This phone is a factory refurbished. 8th one I have had since Dec 2010. AT&T has done exchange on all.

If ur running a rom and you can boot fine, then u will b able to get into download mode!
Sent from my Stock KH3/4 2.3.4 Captivate using the XDA Premium App!

This is not true. I can get to recovery screen but I can not get to download screen or if I plug in charger will not charge unless phone is on. reboots system threw ATT world screen

That is true, do u know what bootloaders ur running
Sent from my Stock KH3/4 2.3.4 Captivate using the XDA Premium App!

No I used orden 1.83 to load .
Left battery out for five minutes. Stuck battery back in and waited. Plug battery charger in phone started up using ATT world phone screen. Shows that battery is charging.
Debug mode has been turn on

Try using AIO toolbox to install drivers after uninstalling the old ones(this fixed me right up), and try a different port.
Let me know how it goes
Sent from my Stock KH3/4 2.3.4 Captivate using the XDA Premium App!

Did this also. USB does not show up

Another cable maybe
Sent from my Stock KH3/4 2.3.4 Captivate using the XDA Premium App!

Try another cable still the same

Idk man
Sent from my Stock KH3/4 2.3.4 Captivate using the XDA Premium App!

Is there anyway of putting 2.3.3 on external sd card and do recovery?

Umm if ur computer can see yiur phone in debugging mode while on, try
adb reboot download
Sent from my Stock KH3/4 2.3.4 Captivate using the XDA Premium App!

no it does not. Is there a rom that the recovery mode can see?

bmttinman said:
no it does not. Is there a rom that the recovery mode can see?
Click to expand...
Click to collapse
Look for biffmod, and flash it, it changes everything u need, let me check b4 u do this tho, i will confirm in a minute
Yahh here yahh go
http://forum.xda-developers.com/showthread.php?t=1212400
Sent from my Stock KH3/4 2.3.4 Captivate using the XDA Premium App!

bmttinman said:
used to update to 2.3.4 http://forum.xda-developers.com/showthread.php?t=1232703 and worked fine. Now I can not get to download mode or recognize USB to in any program on Windows 7 64 bit . I will not show charge screen or find it self.
I got battery to charge on wall charger but will not threw computer and only with phone on not off. I have checked several USB ports on two separate computer. I can get to recovery screen but not Download screen
Click to expand...
Click to collapse
Try to install Keis mini for the latest drivers. I had connection issues after flashing the leaked 2.3.4, and installing keis mini fixed it. Reboot your computer after the driver installation, and it should connect the phone fine. Also, what rom were you running before flashing? This may be a stupid question, but are you sure you were using the correct key combo for download mode?

As mentioned re-install with the latest drivers. You can get the LATEST Samsung drivers plus Odin 1.85 from my downloads page here:
http://www.mobiletechvideos.com/blog/?page_id=1095
Don't worry about them being in the SGS II section they work for all Samsung Galaxy S devices and are the latest ones.

Used one that came from Link. It gives file as SGH-I897_ATT_I897UCKH3_I897ATTKH3_I897UCKH3_I897UCKH3. Used oden 3 V1.83 to phone. I somehow got the phone to download mode and re-installed 2.3.3 and rooted with this post How to Root Captivate 2.3.3 Gingerbread with I897UCKF1 AutoRoot DesignGears.tar found here http://www.techpetals.com/how-to-ro...-with-i897uckf1-autoroot-designgears.tar-3624. This worked fine then I tried to get 2.3.4 to load AGAIN and found it was not rooted and use same procedure to root which it did. Now it keeps rebooting. Phone freezes then reboot to main screen. I have gotten the charge to work in off position my rebooting PC and leaving it pluged in by USB and trying top get to DOWN Load screen but will not work. Tried I900 procedure and this puts it in to recovery mode
I have reloaded 64 bit drivers again. USB plug on HP DV7 Laptop with I5 Intel chip is showing phone with No battery installed trying to connect but drive USB not recognized warning. Have tried to re-boot phone but keeps going to AT&T log screen or I can get to Recovery mode no download mode

You have to get it into download mode again, to flash the stock KH3 kernel! Can be found in dev section. If you can get into recovery flash biffmod and then to stock with odin one click
Sent from my Stock KH3/4 2.3.4 Captivate using the XDA Premium App!

biffmod is not in recovery mode. A list can be seen and not there

You have to download it on ur computer, then in recovery mount usb to computer and transfer it, then flash it
Sent from my Stock KH3/4 2.3.4 Captivate using the XDA Premium App!

[Q] While flashing stock via odin screen gets blue/purple

Hey there,
Got my moms Galaxy over here. Thing wasn't updated and slow as hell so I thought I'd update it. Went through the Kies process but that didn't really work, phone just couldn't make connection despite what ever driver I used (win or mac, got both here).
So first things went haywire when I read somewhere to flash recovery I needed to do something via Heimdall. Did that with the command window and afterwards the phone got stuck in a bootloop (only the I9000+samsung repeating over and over again).
Then I tried flashing GB from samfirmware, which failed. All done through odin, the screen went purple at dbdata.rfs. So I went with stock froyo, from the androidworld.nl forums and same thing happens but now it's a blue screen at factoryfs.rfs.
What am I doing wrong?

Try flashing again via Odin and this time don't touch your pc while it is flashing. That yellow purple screen has happened to me while I was doing other things while flashing was going on in the background.
And check if your phone is i9000 or i9000+ and flash the their respective firmware .
Sent from my GT-I9000 using XDA App

gcuchiha said:
Try flashing again via Odin and this time don't touch your pc while it is flashing. That yellow purple screen has happened to me while I was doing other things while flashing was going on in the background.
And check if your phone is i9000 or i9000+ and flash the their respective firmware .
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Same thing, didn't do anything and screen went gray. This is so random for me, as flashing is SO easy with my own Desire but this thing is on a whole different level.

Try changing your Odin version to 1.82 and try again.
Sent from my GT-I9000 using XDA App

Or 1.3 idk try both.
Sent from my GT-I9000 using XDA App

gcuchiha said:
Try changing your Odin version to 1.82 and try again.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
gcuchiha said:
Or 1.3 idk try both.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Actually did both already! The 1.3 was from the 2.2 pack from the Dutch forum. Got 1.82 from the samfirmware website. No luck yet
1.82 shows a bootloader function, do I need to have one of those files with it?

No don't flash bootloader
Sent from my GT-I9000 using XDA App

gcuchiha said:
No don't flash bootloader
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I was about to try this actually! http://forum.xda-developers.com/showthread.php?t=1196179
Since the screwup started with Heimdall, might fix it with that?

Watch a YouTube video and see if you're doing everything properly.
What I do is
1. Go to download mode
2. Open Odin, select pit, PDA, phone, CSC files. And remember to check the re partition option
3. Connect your phone
4. Click start.
Sent from my GT-I9000 using XDA App

Maybe. I never used heimdall. Maybe you could try that.
Sent from my GT-I9000 using XDA App

gcuchiha said:
Watch a YouTube video and see if you're doing everything properly.
What I do is
1. Go to download mode
2. Open Odin, select pit, PDA, phone, CSC files. And remember to check the re partition option
3. Connect your phone
4. Click start.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Doing all that yeah, exactly in that order.

Hmmm. Then I guess heimdall is your only hope ,since it started the problem.
Sent from my GT-I9000 using XDA App

Hmm, in Heimdall it gets all the way up to MODEM @ 59%. Then it fails and crashes..
weird
[edit] buuuuuuuut I got android recovery back! okay now we have progress!
and now by adding the packaged zImage from CM have CM.. progress again!

Are you using the original USB cable?. Same thing happened to me with a cheap ebay cable...

cabessius said:
Are you using the original USB cable?. Same thing happened to me with a cheap ebay cable...
Click to expand...
Click to collapse
Hm, no. It's a replacement cable (cheap) which I used for my Desire, no problem with that at all. Though it might be it indeed! Will be two days before I can get the original cable.
In the meanwhile I got CWM-based Recovery v.5.0.2.6 working.. while installing cyanogenmod it goes "checking blm status", then "install from sd complete".. a bit strange and it doesn't boot into the rom but into the recovery.

Lipinsky said:
Hm, no. It's a replacement cable (cheap) which I used for my Desire, no problem with that at all. Though it might be it indeed! Will be two days before I can get the original cable.
In the meanwhile I got CWM-based Recovery v.5.0.2.6 working.. while installing cyanogenmod it goes "checking blm status", then "install from sd complete".. a bit strange and it doesn't boot into the rom but into the recovery.
Click to expand...
Click to collapse
Switching back to the original cable fixed the problem for me. Hope it does for you as well, try that and tell us what happened!.

Can I still use Odin then, now with CWM recovery?

You can use Mobile Odin by Chainfire (look for it in the market), it works exactly as an Odin built-in your SGS with no need for PC.

cabessius said:
You can use Mobile Odin by Chainfire (look for it in the market), it works exactly as an Odin built-in your SGS with no need for PC.
Click to expand...
Click to collapse
Uhm, well I can't get really into any market as no rom will boot at this moment..

Guys, thanks for the cable advice! Could get my hands on a SE cable and flashed 2.3.5 stock through Odin. Happy that I didn't wreck my moms phone :')

Brick or what?

Hi guys,
In my hands come SGS which cant boot up, same trouble like in this video:
http://www.youtube.com/watch?v=MsGuKUv_s2s&feature=related
but my SGS bootloopin´ this.I have instaled Kies, and shut down Kies and Kies tray agent(Only for Driver to ODIN).But it didnt work, so i have linstaled another drivers, and nothing new.Phone boot up to download mode without problems, but cant boot up to recovery.I have to try tutorial with download mode(Like with JIG) without JIG and didnt work.So what must i do to save the phone?Thanks for all answers.

Not really clear but if you can get into download mode and Odin recognizes phone then flash new firmware. But I suspect you are saying Odin isn't detecting the device.
Sent from my GT-I9100T

Buy usb jig on ebay, put it in downlaod mode and reflash some stock kernel. It should do the trick.
Sent from my GT-I9000 using XDA App

if you were flashing an ics based rom you need nexus s driver's on the PC for Odin to see your phone as the stock Samsung one is no use now.
Sent from my GT-I9000 using xda premium

I`m in trouble
Hi guys.
I can`t make my windows 7 recognize the SGS...I`ve already tried the USB_samsung drivers, even for Nexus...but the error 43 always appears.
I can turn on the phone in CWM but anything can be done, always data problems...so I only can put it on Download Mode, but I can`t download anything, the Odin doesn`t have a Comm Port communication.
I was restoring for Factory Default when it happens...I was using the MyUltimate 1.3...after I flashed the ICS RC 4.2...and now anything works.
Sorry about my English...I`m Brazilian.
I really appreciate any kind of help.

picture of my problem
I forgot to post a picture of the CWM messages...it`s attached...thanks a lot

I Have same problem, ODIN cant recognize phone, drivers and PC is ok, i have next Galaxy and is workin with ODIN without problem.But with this SGS, which cant boot up ODIN didnt comunicate, some ideas?

no idea
Thompson111 said:
I Have same problem, ODIN cant recognize phone, drivers and PC is ok, i have next Galaxy and is workin with ODIN without problem.But with this SGS, which cant boot up ODIN didnt comunicate, some ideas?
Click to expand...
Click to collapse
I have no idea...i`m reading many help option in differents Android/SGS forums, but anything is going well...
Does anybody know if doing a JIG download, like if the device was bricked wouls resolve?

[Q] Captivate soft bricked.

I need Help people, Understand my problem First,
1. I bought a new Samsung AT&T Captivate.
2. Upgraded to 2.3 Kies.
3. Used CornKernel_UCKK4_v705 to root my phone and flash CWM.
4. backed up my OS 2.3 using CWM,
5. Success fully installed STABLE CM 10.0.
6. Everything was great. Tried installing CM 10.1 and Gapps crashed everytime.
7. THEN i made the big Mistake, RESTORED 2.3 stock OS using CWM and it stuck at some point and battery drained.
8. Now my phone hangs at AT&T logo. and if try to enter download mode battery logo flashes.
9. I tried ODIN one click to unbrick to recover the stock OS and now i cant even get into DOWNLOAD mode.
Please Help friends i know u must have faced such situation, i NEED HELP. :crying:

Avikar said:
I need Help people, Understand my problem First,
1. I bought a new Samsung AT&T Captivate.
2. Upgraded to 2.3 Kies.
3. Used CornKernel_UCKK4_v705 to root my phone and flash CWM.
4. backed up my OS 2.3 using CWM,
5. Success fully installed STABLE CM 10.0.
6. Everything was great. Tried installing CM 10.1 and Gapps crashed everytime.
7. THEN i made the big Mistake, RESTORED 2.3 stock OS using CWM and it stuck at some point and battery drained.
8. Now my phone hangs at AT&T logo. and if try to enter download mode battery logo flashes.
9. I tried ODIN one click to unbrick to recover the stock OS and now i cant even get into DOWNLOAD mode.
Please Help friends i know u must have faced such situation, i NEED HELP. :crying:
Click to expand...
Click to collapse
Try holding volume up + volume down and then plug in the USB cord that is plugged into your PC. This should take you to download mode. If this doesn't help you will have to purchase a jig

n205des said:
Try holding volume up + volume down and then plug in the USB cord that is plugged into your PC. This should take you to download mode. If this doesn't help you will have to purchase a jig
Click to expand...
Click to collapse
Thanks for the quick reply,
Yeah i have ordered one, Jig is on the way but now what after coming to download mode? Odin disabled my download mode, What should i do now?

Avikar said:
Thanks for the quick reply,
Yeah i have ordered one, Jig is on the way but now what after coming to download mode? Odin disabled my download mode, What should i do now?
Click to expand...
Click to collapse
download this
http://www.mediafire.com/?sbjd049x4m36pb6
after downloading it run it as administrator
then connect the jig to the phone and then it will boot in download mode
then you caqn remove the jig and connect the usb cable to the pc
and you will see a yellow prompt like the one in odin..
and then click on start..
the stock rom flashing will start...

Dude why the hell "junior" written under ur name, U RECOVERED MY PHONE.
n205des said:
download this
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
after downloading it run it as administrator
then connect the jig to the phone and then it will boot in download mode
then you caqn remove the jig and connect the usb cable to the pc
and you will see a yellow prompt like the one in odin..
and then click on start..
the stock rom flashing will start...
Click to expand...
Click to collapse
tHANKS to the brain who developed this resistor thing, My phone moved to Download mode and then thanks to the person who gave me the link in the above comment,,
But now i cant flash CWM I flashed it earlier without any problem but now i cant and seriously after using JB 4.1 GB seems very bad,
Any ways a great great thanks my phone is breathing because of u.. High Five

Avikar said:
tHANKS to the brain who developed this resistor thing, My phone moved to Download mode and then thanks to the person who gave me the link in the above comment,,
But now i cant flash CWM I flashed it earlier without any problem but now i cant and seriously after using JB 4.1 GB seems very bad,
Any ways a great great thanks my phone is breathing because of u.. High Five
Click to expand...
Click to collapse
it already has CWM in it as it does not have the stock kernel..
it is based on boog's KI1/KI2 Kernel

but how to boot into cwm??
n205des said:
it already has CWM in it as it does not have the stock kernel..
it is based on boog's KI1/KI2 Kernel
Click to expand...
Click to collapse
I almost tried everything but can nt boot into cwm. what the combo for this kernel to boot into recovery?

Avikar,
This Stickied thread will prove helpful.... Captivate - PC Connection Issues, Download Mode and Recovery Mode Help
Sent from my SAMSUNG-SGH-I747 using xda premium

Avikar said:
I almost tried everything but can nt boot into cwm. what the combo for this kernel to boot into recovery?
Click to expand...
Click to collapse
volume+ volume- and power button is the combo for recovery..

Still not there.
n205des said:
volume+ volume- and power button is the combo for recovery..
Click to expand...
Click to collapse
I have recovered from a soft brick using a jig, I know these shortcuts very well but none is working even to come into a download mode i always need a Jig it was all good when i installed cm 10.0 the second day i bought this phone but now after the attempt to restore into stock ROM was a mess, then thanks to u my phone got a life again, but now even the CornKernel_UCKK4_v705 isn,t working on my phone,
Any IDEAS???

^
The KK4 Corn Kernel will only boot up and run if u r on KK4 firmware or a Rom of that base...or previous stock firmware/roms.
Sent from my SGH-I777 using xda premium

Avikar said:
I have recovered from a soft brick using a jig, I know these shortcuts very well but none is working even to come into a download mode i always need a Jig it was all good when i installed cm 10.0 the second day i bought this phone but now after the attempt to restore into stock ROM was a mess, then thanks to u my phone got a life again, but now even the CornKernel_UCKK4_v705 isn,t working on my phone,
Any IDEAS???
Click to expand...
Click to collapse
it does not boot in recovery,right?
have you tried through rom manager??

^
Rom manager does not work well with the Captivate.
Sent from my SGH-I777 using xda premium

4-2ndtwin said:
^
Rom manager does not work well with the Captivate.
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
but it can help by booting into recovery without the three button combo.

Yes, to that. Thank u for clarifying. :thumbup:
Sent from my SGH-I777 using xda premium

Still nothing.
4-2ndtwin said:
Yes, to that. Thank u for clarifying. :thumbup:
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
1.KK4_Root_v1_1: Bricks my phone. Have to use Jig to come to download mode,
2.I897UCJF6-final-OCD-REV0: This is stock rom using odin, which also bricks my phone,
3.KI2_noBL_BoogsKernel: this wakes up my phone to GB stock Rom but no sign of booting into recovery, and my phone lost its root after installing it,
4.CornKernel_UCKK4_v705: successfully flashed using ODIN but still can not boot into recover.
Looks like I have to stick to Gingerbread for eternity and for more clarification,
Currently my has Firmware 2.3.5
Baseband I897UCKI2
Kernel 2.6.35.7-I897UCKI1- CL607313
Build: GINGERBREAD.UCKI2

Avikar said:
1.KK4_Root_v1_1: Bricks my phone. Have to use Jig to come to download mode,
2.I897UCJF6-final-OCD-REV0: This is stock rom using odin, which also bricks my phone,
3.KI2_noBL_BoogsKernel: this wakes up my phone to GB stock Rom but no sign of booting into recovery, and my phone lost its root after installing it,
4.CornKernel_UCKK4_v705: successfully flashed using ODIN but still can not boot into recover.
Looks like I have to stick to Gingerbread for eternity and for more clarification,
Currently my has Firmware 2.3.5
Baseband I897UCKI2
Kernel 2.6.35.7-I897UCKI1- CL607313
Build: GINGERBREAD.UCKI2
Click to expand...
Click to collapse
try flashing froyo or eclair
you can find these packages here
http://forum.xda-developers.com/showthread.php?t=1300843

Which one to try first?
Sent from my SAMSUNG-SGH-I897 using xda app-developers app

Avikar said:
Which one to try first?
Sent from my SAMSUNG-SGH-I897 using xda app-developers app
Click to expand...
Click to collapse
try anything which you like

n205des said:
try flashing froyo or eclair
you can find these packages here
http://forum.xda-developers.com/showthread.php?t=1300843
Click to expand...
Click to collapse
As i mentioned stock rom 2.1 eclair from the same forum Bricks my phone,
Didnt try 2.2,
recently on the 2.3 from the same forum but no help...Instead of boot logo some white backgound with million colour dots appear and I can not
enter to recovery or download mode i have tried every thing,,,

[Q] HELP!! Captivate Stuck on AT&T Boot Screen After ClockWorkMod Install

[Solved!]
Hey everyone!
I followed the Cyanogenmod guide from cm's website on how to install cm 10 on rooted att captivate from android 2.2 froyo.
I followed the guide exactly up to installing cwm recovery via heimdall on a windows 7 (heimdall wouldn't work on an xp I have so I switched to my 7) and everything worked as it said it would, however after finishing and getting the blue bar on the download mode screen, I held the vol up/down and pwr keys per the guide and the phone went to the att logo screen that it shows when you first turn it on and it just flashes that screen.
I can get into download mode still but it won't go into the options screen to hard reset or use cwm recovery.
I rooted it using the superoneclick method and I backedup with titanium.
I haven't been able to find anyone on xda or any other site with the same problem as me (everyone with a similar problem had a different version of android or something so I was afraid to try the solutions given for them.)
Please Help!! Thank you so much in advance!!

http://forum.xda-developers.com/showthread.php?t=731989
Follow this guide after putting your phone into download mode.
Sent from my SGH-I897 using Tapatalk 2

chdiryoung said:
Hey everyone!
I followed the Cyanogenmod guide from cm's website on how to install cm 10 on rooted att captivate from android 2.2 froyo.
I followed the guide exactly up to installing cwm recovery via heimdall on a windows 7 (heimdall wouldn't work on an xp I have so I switched to my 7) and everything worked as it said it would, however after finishing and getting the blue bar on the download mode screen, I held the vol up/down and pwr keys per the guide and the phone went to the att logo screen that it shows when you first turn it on and it just flashes that screen.
I can get into download mode still but it won't go into the options screen to hard reset or use cwm recovery.
I rooted it using the superoneclick method and I backedup with titanium.
I haven't been able to find anyone on xda or any other site with the same problem as me (everyone with a similar problem had a different version of android or something so I was afraid to try the solutions given for them.)
Please Help!! Thank you so much in advance!!
Click to expand...
Click to collapse
See this Captivate - PC Connection Issues, Download Mode and Recovery Mode Help thread on more info on how to get the phone to boot into Recovery...http://forum.xda-developers.com/showpost.php?p=33227541&postcount=1
Sent from my SAMSUNG-SGH-I747 using xda premium

Thanks, I tried getting into recovery mode using the guide on that thread but no luck. I haven't gotten to try the first guide suggested yet so when I have time I'll try that. Thankfully I can get into download mode fine.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app

Here is the last Stock Firmware released, i897ucKK4 Gingerbread 2.3.5, if ya wanna flash it instead.. http://forum.xda-developers.com/showpost.php?p=18370912&postcount=3 ...Since ya can get in Download mode.
Flashin to KK4 with the Bootloaders included (if u don't already have them) has solved the button combo problems for others who were not able to get into recovery, etc.
Heed all warnings about flashin bootloaders. It only takes a few seconds to flash the boot.bin and sbl.bin, but ya don't wanna interupt the flash durin that process, i.e. loose power, accidently disconnect micro usb/usb cable, etc.
Once ya have the gb boots, there is no need to flash bootloaders again.
Sent from my SAMSUNG-SGH-I747 using xda premium

Thanks so much, I'm gonna try that on Monday first chance I get!
Sent from my SAMSUNG-SGH-I317 using xda app-developers app

4-2ndtwin said:
Here is the last Stock Firmware released, i897ucKK4 Gingerbread 2.3.5, if ya wanna flash it instead.. http://forum.xda-developers.com/showpost.php?p=18370912&postcount=3 ...Since ya can get in Download mode.
Flashin to KK4 with the Bootloaders included (if u don't already have them) has solved the button combo problems for others who were not able to get into recovery, etc.
Heed all warnings about flashin bootloaders. It only takes a few seconds to flash the boot.bin and sbl.bin, but ya don't wanna interupt the flash durin that process, i.e. loose power, accidently disconnect micro usb/usb cable, etc.
Once ya have the gb boots, there is no need to flash bootloaders again.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
How long should/could it take Odin to detect/recognize my captivate? I couldn't wait to try the KK4 flash, but I've waited for about 10 minutes and it's not showing anything in Odin.:\

It should only take a few seconds.
See that Captivate - PC Connection Issues...thread i linked u to in my reply a few posts up.
Sent from my SAMSUNG-SGH-I747 using xda premium

Well I've been up all night lol but I got everything to work!! I guess it all just clicked with me and I understood and found all the answers in threads. THANK YOU SO MUCH!! Your link and Odin one click worked perfect. I think I had a problem with the drivers, that's why it wouldn't detect it. I read in another thread it could be that and I tried reinstalling the Samsung drivers but no luck. So I just switched to my windows xp where I'd never used heimdall drivers(I was on my windows 7) and did it on there, worked perfectly! I then went on to reinstall cwm and then cm 10.1.2 and I love it! Now I'm waiting for the Google play store .zip to download so I can flash it onto my i897! THANKS AGAIN!!! :thumbup:
Sent from my SAMSUNG-SGH-I317 using xda app-developers app