I have been looking through the threads, and havent seen what I am looking for. So hopefully i will not get flamed to bad. I tried to install mikeymikes GR12, I got through the first stage of downloading the gingerbread rom to the phone through odin, but then it went south. I lost root and was unable to get back to the download screen. I then tried to use the all in one tool to root the phone, and that put me to the recovery screen where i could not use the ok button, just the volume up and down buttons. I just managed to get the download screen to come back, but i cant get anything else to work. Any suggestions on what to do, where to go from here.
Thank you for your help
I would go back to stock first. I believe your problem lies in the bootloaders. There are two bootloaders in the beginning and if you don't have the gingerbread ones installed, you won't install gingerbread properly.
I would use DesignGears One Click Odin to go back to stock and load the Froyo drivers. http://forum.xda-developers.com/showthread.php?t=731989. Make sure you open up Odin first before plugging in your phone, then hit the Start button.
Once that is done, you can try again, but read about getting the GB bootloaders installed properly before you try to flash a GB ROM. Any of the GB ROM instructions should get you there. Just make sure you know all the steps before you try it again.
Good Luck!!
I don't see why you would be flamed for your question. That is what Q&A is for and you are in a bad spot. The biggest thing to remember is to be as specific as possible when you post a question. This includes what you were trying to do, what steps you took, what was the result, when did the problem occur (which step) and what you have tried to do, if anything to fix it.
One more thing. It is always possible that the USB cable is bad or that the USB port you are plugging into (on the computer) isn't working properly. You might also want to plug into a different USB port.
Sorry these posts are broken up, but as I'm coming up with ideas, I'm posting.
Here's something you should try:
(I wrote this for Team Phoenix, hence the sig.. But it works the same with every ROM. There's a link to a very nice tutorial I suggest you follow).
http://forum.xda-developers.com/showpost.php?p=13503747&postcount=2
Hope it helps
You guys are awesome, Odin one click worked, It's on eclair, but it works! Thank you again
donkeyboy said:
You guys are awesome, Odin one click worked, It's on eclair, but it works! Thank you again
Click to expand...
Click to collapse
Glad it worked!
Make sure you read and understand before going forward with flashing
Otherwise... well.. I'll still be in here ready to help lol
BWolf56 said:
Glad it worked!
Make sure you read and understand before going forward with flashing
Otherwise... well.. I'll still be in here ready to help lol
Click to expand...
Click to collapse
Me too. If we can ... Remember not all things can be recovered from so please read everything twice before ever touching your phone.
10-4. My next question is: where do I get froyo from. Kies sees my eclair version as unregistered, so it wont update. And my ota sees an update is needed, but when i tried, the area im in has crappy signal, so the update failed and now i have to wait 24 hours to do it.
Any suggestions?
Thanks again
are you planning on flashing a custom rom?
if so updating to official froyo is A HUGE WASTE OF TIME
EDIT:are you Canadian by chance? if so check this thread:http://forum.xda-developers.com/showthread.php?t=979133
I only plan to root the official froyo right now, that is what I had before I jacked it up. I am not Canadian.
donkeyboy said:
I only plan to root the official froyo right now, that is what I had before I jacked it up. I am not Canadian.
Click to expand...
Click to collapse
Going on official froyo will get you the signature failed error (which you need the 3e recovery fix if you ever want to flash a custom ROM).
So, basically, if you want more than 2.2 official release. We suggest you don't update. If you're perfectly fine staying on 2.2 Froyo, then there's no problem lol
As for Kies, you shouldn't have any problem using Kies mini. Other than that, there is a 2.2 flash around here. I'm sure you'll find it doing a little search
I had root on my official froyo for a couple of months without a problem. Right now i cant get my phone to go into download mode, it only goes to the battery screen. If i can get to download i can make some headway
donkeyboy said:
I had root on my official froyo for a couple of months without a problem. Right now i cant get my phone to go into download mode, it only goes to the battery screen. If i can get to download i can make some headway
Click to expand...
Click to collapse
If the battery pull way isn't working. You could always go read on abd. It send SU commands and you could get your phone in downlaod mode that way.
Is there an easy way to get adb without getting the sdk. I downloaded the sdk and it keeps saying i need java, when i download the java crap it says the same thing.
donkeyboy said:
Is there an easy way to get adb without getting the sdk. I downloaded the sdk and it keeps saying i need java, when i download the java crap it says the same thing.
Click to expand...
Click to collapse
Did you reboot your pc?
Yes i did, no change
i believe you need microsoft .net framework installed also...
easy adb setup link in my sig.
files and everything needed to get going.
you may want to build a jig yourself or buy one online just in case:
MOD EDIT: No links to commercial products please.
Related
So, the only thing holding me back was voiding the warranty and the fact I have a rogers phone (build EPE54B).... so I think I have to flash the build to the one that matches the update?
Sooooo if anyone wants to point me in the safest, easiest direction... I would appreciate it... and dos and don't would be appreciated as well. I am new to the phone an android, so feel free to dumb it down.
Does the build actually mean anything? What happens once I change it... and official updates come out? I am going to cut the grass... and then root, so help me out (preferably someone that is on rogers and has done this)
thx in advance! Froyo or Brick, here I come!
had a long day with chores and family day.... but I am back at it, first tutorial down and it seems solid...
Uploaded with ImageShack.us
onward!
Let me know how you make out. I'm on Rogers as well and am debating rooting.
Just looking at the stickies in General section would save you from opening yet another thread on the subject
Follow this until rooted:
http://forum.xda-developers.com/showthread.php?t=636795
Follow the guide for rooted N1s from here:
http://forum.xda-developers.com/showthread.php?t=686326
Let me know how it goes for you.
I am on Rogers and experienced EXTREME instability the moment I flashed the Froyo radio. My phone would crash randomly and frequently.
I suspect it was a problem with my hardware and have returned the phone and am waiting for a new one.
Jack_R1 said:
Just looking at the stickies in General section would save you from opening yet another thread on the subject
Follow this until rooted:
http://forum.xda-developers.com/showthread.php?t=636795
Follow the guide for rooted N1s from here:
http://forum.xda-developers.com/showthread.php?t=686326
Click to expand...
Click to collapse
thx jack, I appreciate it.... sorry for the thread... but in my experience... it is easier having your hand held by someone experienced.... then assuming I am following the right one, lol.... so I follow that entire thread to go from rogers to whatever build I need? heh
I will try this in approx 2 hours.... when the yard work is done!
early quick question, when I go to "CyanogenMod"
it takes me to a thread, but I do not see the download, what am I not seeing? heh
I am at this part
Type: fastboot flash recovery recovery-RA-nexus-v1.7.0.img
it says cannot load image recovery? thx
well everything was working great up until this point, tried it 100 times, heh... so now I sit and wait for guidance? thx
Mr.Kakarot, have you put the .img in the same folder as fastboot? Or, alternatively, if fastboot is in your PATH, you won't have this problem.
i renamed the image to recovery.img and that seemed to work? I will continue after supper!
Jack_R1 said:
Just looking at the stickies in General section would save you from opening yet another thread on the subject
Follow this until rooted:
http://forum.xda-developers.com/showthread.php?t=636795
Follow the guide for rooted N1s from here:
http://forum.xda-developers.com/showthread.php?t=686326
Click to expand...
Click to collapse
followed that first thread to a T and it worked out... had 2 minor stalls but I got through it... I am doing this stuff off and on, thx for that thread... this is going to be a STUPID question I am sure... but following that first thread, what have I done? unlocked, rooted and installed google add ons? phone looks awesome, I will do the rest after supper!
hmmm, got it, lol
done, running 2.2.... so tomorrow at work, i guess I will see if I have any issues....
now that this is done, can I re install that sense ui? What should I do or try now that I have done those 2 tutorials? thx
first off there are no 2.2 froyo/sense roms available as of yet.. so if you want to use a desire rom youre more than likely going to want to downgrade to the latest 2.1 radio that works well with your carrier/area, as froyo has its own radio and needs it to run properly.. once you downgrade.. nandroid>wipe>flash
yea, I did not know it would put me back to 2.1, lol.... went back and then back again to 2.2, lol... sense sure looked good!
Any ideas, suggestions, tips for 2.2? I installed flash! thx
How stable is your phone with the Froyo radio? Any unexplained reboots yet?
well it was quite late by the time I did it, I was playing with it, went to a few flash websites.... and no reboots or shutdowns, I also just woke up.... so I will know today after a full day work/playing, thx
one of the bugs is my camera does not work for video... so I have to update the radio, any suggestions! thx
Nope thats pretty much what you need to do is update the radio
thanks, but I am not gonna lie... still not sure which are radios, roms, senses, lol.... could you point me to the one I need.... or does it matter? thx, I just do not want to brick, obviously!
Also, I did not do this step.... is this what I need to do, or is it unrelated?
11) You should still have root, but if you want BusyBox (or lost root somehow), Cyanogen has done it again! Go back into Recovery and flash froyo-rooter-signed.zip. Then Titanium Backup will work once again.
does not sound like something I need or use, so I did not do it....
as far as stability... my 3g signal looked low all day... but I never had a dropped call, instability or any reboots/crashes.... all is well! thx
go here:
http://forum.xda-developers.com/showpost.php?p=6734240&postcount=9532
havent had problems with the older one, but am going to try the new one just to see.
anyone around?
I tried these 3 things
Step_One_Froyo_Radio_Update.zip
step-two-RoDrIgUeZsTyLe-FroYo-MCR-R16-MOD-V1.8-FIX.zip
and then i ran
2.6.34_AVS-925mV_CFS_1113Mhz_061210.zip
anytime I run setcpu, I get this error
the application process com.mhuang.overclocking has stopped unexpectedly, please try again?
"uninstalled and reinstalled, worked. thx"
Few days ago I rooted and put Serendipity 2.0 on my Build 1010 with no problems.
I want to try Cognition 3.01.
So I followed the SAME method used in the MobileTechVideos and I cannot figure out how to get it into download mode
I have tried the 3 button method several times and it just takes me to the battery charging icon.
------
Would I be able to just pull up Odin3 (I897UCJF6-final-OCD-REV0) .exe as administrator, plug in USB, turn on phone, and go to DL mode through the phone via that way? Would it recognize it on my computer so I can just go back to stock and do the entire process over again for a ROM?
Or is this easier: http://forum.xda-developers.com/showthread.php?t=818439
Would going to download manager through my phone while having Odin3 pulled up on the computer and my USB of course plugged in, work???
Please, someone, anyone!!! Wanting to try a new ROM so bad!!!
I would flash back to stock and start fresh
Have you used odin before?
I can get you into download mode and going with odin if your phone is working and recognized by your computer but with your build you don't want to use the odin you linked I am pretty sure.
crupp said:
I would flash back to stock and start fresh
Click to expand...
Click to collapse
That's what I'm trying to do!!! I just need to get into download mode first. My phone is not bricked or anything; it's working great. I just need to get into download mode so I go back to stock and put a new ROM on!!!
I think it's because of my build, 1010.
Can anyone confirm C3POs (Odin3) method works?
xThe Enforcer said:
Few days ago I rooted and put Serendipity 2.0 on my Build 1010 with no problems.
<snip>
Would I be able to just pull up Odin3 (I897UCJF6-final-OCD-REV0) .exe as administrator, plug in USB, turn on phone, and go to DL mode through the phone via that way? Would it recognize it on my computer so I can just go back to stock and do the entire process over again for a ROM?
Click to expand...
Click to collapse
You would probably end up with a brick.
See: http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
And, BTW, there is no need to flash stock before flashing Cognition, but it's still good to find a reliable way in case you ever have a real need to do so. Also, I'm pretty sure Cognition still includes and sbl.bin that will fix your button combos (that's not normally a good thing, but in your case it is).
xThe Enforcer said:
That's what I'm trying to do!!! I just need to get into download mode first. My phone is not bricked or anything; it's working great. I just need to get into download mode so I go back to stock and put a new ROM on!!!
I think it's because of my build, 1010.
Can anyone confirm C3POs (Odin3) method works?
Click to expand...
Click to collapse
I also have 010 and have flashed half a dozen rooms and used 3 button for all of them including Cog 3
opcow said:
You would probably end up with a brick.
See: http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
And, BTW, there is no need to flash stock before flashing Cognition, but it's still good to find a reliable way in case you ever have a real need to do so. Also, I'm pretty sure Cognition still includes and sbl.bin that will fix your button combos (that's not normally a good thing, but in your case it is).
Click to expand...
Click to collapse
Thanks for the link.
So bottom line; just use a different Odin3. Just like I originally posted:
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
Same concept.
crupp said:
I also have 010 and have flashed half a dozen rooms and used 3 button for all of them including Cog 3
Click to expand...
Click to collapse
Every phone is different. I've read of someone with 1008 not having 3 button.
opcow said:
You would probably end up with a brick.
See: http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
And, BTW, there is no need to flash stock before flashing Cognition, but it's still good to find a reliable way in case you ever have a real need to do so. Also, I'm pretty sure Cognition still includes and sbl.bin that will fix your button combos (that's not normally a good thing, but in your case it is).
Click to expand...
Click to collapse
And also, I disagree. Every ALWAYS says to flash to stock no matter what...
xThe Enforcer said:
And also, I disagree. Every ALWAYS says to flash to stock no matter what...
Click to expand...
Click to collapse
Not everyone. It's apparently mainly confined to the Captivate forums and not universally recommended even here (Darky's instructions say nothing about it, for example). There is no benefit to doing so, believe it or not. Of course I don't care how anyone does it. It's up to you. If you tell people it's safer, however, you're misinforming people based on something that got started months ago and just became the status quo.
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
I believe this is what im looking for. I couldn't find the pit nor tar files any where. Im a vibrant owner so not to familiar with the files. Thanks. Will let you know.
Sent from my SGH-T959 using XDA App
Well bottom line, I think the easiest method for me to get into download mode every time I want to root/flash is by using the 99 cent jig. Thanks everyone for there info.
So I got into download mode by installing a 3buttonfix.zip via CWM.
I used Odin3 exactly like your supposed to. Went to stock, master cleared. Everything passed and completed.
My phone is now back to stock but still showing all files on my SD card. I even tried a factory reset and it still shows them.
Any ideas?
Blah, still no one?
*2767*3855#
This is the code you can enter in the dialer to wipe the phone internal memory. Does not ask for confirmation so make sure you have already done a backup of what you want.
newter55 said:
*2767*3855#
This is the code you can enter in the dialer to wipe the phone internal memory. Does not ask for confirmation so make sure you have already done a backup of what you want.
Click to expand...
Click to collapse
Outstanding. It worked and did actually delete everything on my SD card. It's odd how Master Clear and factory reset through the phone did not but this way did. Build 1010 is bipolar.
Appreciate all the help everyone!
(I gave you a 'thanks' Newter)
Recently, I had a very long discussion with some helpful users regarding how my market disappeared in the Android Themes section. After never recovering my stock market application, I finally just flashed to the cognition rom that is built for 2.1.
This was a huge risk for me because for some reason my phone is not found in Odin when it is in download mode. I have already tried everything to get it recognized, but nothing was able to get it recognized. If I were to brick my phone, I don't think I could fix it. I soft bricked it during the problem with the Market, but luckily I was able to get the phone working again through recovery.
I am thinking of flashing to the new cognition so that I can get my phone running on a 2.2 based rom and then quit flashing until I get a better phone or figure out my Odin problems.
I just have a few questions. I know a lot of people recommend flashing to stock first (which I can't do), while others don't flash stock. I should be able to just disable Voodoo and hopefully flash successfully to a new rom, correct? Also, what are the chances of a permanent brick? As long as I could get into recovery I could probably get the phone back up again without the use of Odin, right?
yentlequible said:
Recently, I had a very long discussion with some helpful users regarding how my market disappeared in the Android Themes section. After never recovering my stock market application, I finally just flashed to the cognition rom that is built for 2.1.
This was a huge risk for me because for some reason my phone is not found in Odin when it is in download mode. I have already tried everything to get it recognized, but nothing was able to get it recognized. If I were to brick my phone, I don't think I could fix it. I soft bricked it during the problem with the Market, but luckily I was able to get the phone working again through recovery.
I am thinking of flashing to the new cognition so that I can get my phone running on a 2.2 based rom and then quit flashing until I get a better phone or figure out my Odin problems.
I just have a few questions. I know a lot of people recommend flashing to stock first (which I can't do), while others don't flash stock. I should be able to just disable Voodoo and hopefully flash successfully to a new rom, correct? Also, what are the chances of a permanent brick? As long as I could get into recovery I could probably get the phone back up again without the use of Odin, right?
Click to expand...
Click to collapse
<<< this might not be helpful, but I will tell you my situation... >>>
I have tried to Rom my JI6 (unoffical froyo) version of captivate, with Cog v2.3b8, using ROM manager.
But after installation, my screen went blank and the battery started to heat up...
After that I was lazy to fix it myself, so I went to exchange shop, and changed it...
- if your phone bricks (forever) try this : http://forum.xda-developers.com/showthread.php?t=775911
peurocs4 said:
<<< this might not be helpful, but I will tell you my situation... >>>
I have tried to Rom my JI6 (unoffical froyo) version of captivate, with Cog v2.3b8, using ROM manager.
But after installation, my screen went blank and the battery started to heat up...
After that I was lazy to fix it myself, so I went to exchange shop, and changed it...
- if your phone bricks (forever) try this : http://forum.xda-developers.com/showthread.php?t=775911
Click to expand...
Click to collapse
I tried that same method and it still did not show up in odin.
Sent from my SAMSUNG-SGH-I897 using XDA App
yentlequible said:
I tried that same method and it still did not show up in odin.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Main problem with your Captivate is that you cannot connect to your PC???
Did you tried using different computer, or using different version of Windows/Mac?
<Sorry, if I'm not really helping you...>
peurocs4 said:
Main problem with your Captivate is that you cannot connect to your PC???
Did you tried using different computer, or using different version of Windows/Mac?
<Sorry, if I'm not really helping you...>
Click to expand...
Click to collapse
Back when I was really trying to figure the problem out (about 2 months ago), I was trying everything mentioned. I tried different versions of odin, 3 separate computers, windows xp/vista/7, front and back usb ports, multiple drivers, etc... The weird thing is that the phone is recognized in odin when it is on, which is how I was able to do a master clear on it. It is just when it is in download mode that it does not recognize it.
I eventually just gave up thinking that it was just a problem my phone has. The only thing I have not been able to test is using a different cable. I have been using the original OEM one, but I guess it could be the problem.
When did you bought the device?
if its within a year... you can exchange it... this looks like easy way out.
Sent from My Captivate
삼성 겔렉시에서 보냄
peurocs4 said:
When did you bought the device?
if its within a year... you can exchange it... this looks like easy way out.
Sent from My Captivate
삼성 겔렉시에서 보냄
Click to expand...
Click to collapse
Unfortunately, It was purchased off contract and used from someone who lived near me. It is less than a year old, I just don't have the receipt for it. I would say that I bought it around the beginning of last August. They guy who sold it said he only used it for 2 weeks.
Ok, im just going to risk it... Phone should be flashed within the next 10 minutes or so.
yentlequible said:
Ok, im just going to risk it... Phone should be flashed within the next 10 minutes or so.
Click to expand...
Click to collapse
I had the same prob at first and what i found is that I had to remove the drivers and then let windows 7 reinstall the drivers on its own again after turning debugging on, then used Odin to activate DL mode and let those drivers install as well
zelendel said:
I had the same prob at first and what i found is that I had to remove the drivers and then let windows 7 reinstall the drivers on its own again after turning debugging on, then used Odin to activate DL mode and let those drivers install as well
Click to expand...
Click to collapse
How do you use Odin to activate DL mode? I was unaware that it could do that...
OK. I started out this adventure to root my phone because I want to use it as a wifi hotspot for my Ipad and not pay AT&T $50/month for that "privelage." I can't figure it out!!!
Phone Info. - Samsung Captivate with Froyo kb2 build. It has the 2.1 adroid when I got it then I updated to 2.2 through the Keis program when it was available.
Before anyone starts with "read and search" lecture, I'll tell you that I've been on this site for a combined 9 hours reading and searching and nothing seems to work. I've tried one-click root programs, I've installed a rooted version of my stock ROM, Ive downloaded more apps, files, or software programs than I can remember. I know how to get the phone into download mode and I know how to boot into recovery mode, but nothing works. Everything seems to come back to the 3e Recovery I have because when I think I am almost there, I get a failed signature error.
I tried the 3e Recovery Mod and that didn't seem to do anything. Is anyone out there willing to help me through this? I am not a programmer, and I don't have any android experience whatsoever, but I can follow direction and am willing to learn. Everytime I find a new thread I seem to get more confused because I'm unclear on the jargon being used, or the thread is on a different ROM or phone so I don't know if it will work. I know "brick" is a bad thing so I don't want to do that.
I any of the experts had my phone what would you do? Do you need more information from me? Also, once I get this figured out, I'de love some recomendation on a better, faster ROM to install.
ANY HELP WOLD BE GREATLY APPRICIATED. Sorry for the frustration.
When I was on the Official Froyo 2.2 the first thing I used to successfully get root was this... View attachment SuperOneClickv1.6.5-ShortFuse.zip
This version was the only one at the time that would work. Extract it and run the SuperOneClick application. Be sure to have the usb debugging on.-- Menu /Settings /Applications /Development /then check the USB debugging.
Hmmmm.....very odd. Froyo is super easy.
Do you have Super User showing up in the apps drawer?
AND DON'T USE KIES ANY MORE FOR UPDATING !! YOU CAN BE IN FOR NASTY SURPRISES.
Been there. I'll try it again, but I think it still can't get around the 3e verification stuff. I'll let you know.
No SuperUser as of yet. I guess that is the point. Once I get rooted, I should get SuperUser status.
DaytonGuy said:
Been there. I'll try it again, but I think it still can't get around the 3e verification stuff. I'll let you know.
Click to expand...
Click to collapse
That requires a custom kernel
*Get Chance and Luck*
DaytonGuy said:
No SuperUser as of yet. I guess that is the point. Once I get rooted, I should get SuperUser status.
Click to expand...
Click to collapse
After u try the SuperOneClick from my previous post, reboot ur phone and then see what u have.
After nearly 9 hours of trying...I have cracked this thing. Turn out there were two threads about the 3e recovery mod. I tried the manual thread with no success. I just found this one that has a one click script to do it.
http://forum.xda-developers.com/showthread.php?t=833423
Once I did that, I used Captivate One Click Root and presto....I now have SuperUser permissions. Sweet.
Thanks to everyone that responded to my questions. I'm sure I'll have more about ROMs and such.
^ Good deal. Glad u got it.
I figured I would be back.
Anyone have a link to a clear explaination on how to CID unlock the Captivate? A video would be fantastic, but I know how that goes. Also, is there a way to tell if it is unlocked or not?
Thanks
DaytonGuy said:
I figured I would be back.
Anyone have a link to a clear explaination on how to CID unlock the Captivate? A video would be fantastic, but I know how that goes. Also, is there a way to tell if it is unlocked or not?
Thanks
Click to expand...
Click to collapse
Maybe this: http://forum.xda-developers.com/showthread.php?t=872455
If you want to go with this - BACK UP YOUR nv_data.bin TO YOUR COMPUTER as soon as you can. DON'T LEAVE IT ONLY ON THE PHONE !!!!
Or have you heard of Samsung Tool v10.7...... here: http://forum.gsmhosting.com/vbb/f45...orld-just-one-more-revolution-update-1327536/
Register and go to "Download Area"
Jesus....tht will have to wait. That looks pretty complicated..... lol
I'll see what I can do later this week.
Thanks!
Galaxy s unlock in the market.
Use the option to back up, then after copy the galaxys unlock folder on your sdcard to your PC someplace safe...
Galaxy s unlock in the market.
Use the option to back up, then after copy the galaxys unlock folder on your sdcard to your PC someplace safe...
Click to expand...
Click to collapse
I tried that early on because it looked so easy. All I get is "Sorry, no codes found unknown error" Is there a way to tell if I'm CID unlocked or not? I haven't done that yet that I know of. I did click the unlock button is Super One Click, but it did nothing. By that I mean the program, nor the phone seemed like anything happened. Early on in this process I found the completly rooted version of my stock Froyo 2.2 and installed that on my phone thinking that it would root the phone. Later realized it doesn't work like that. How do I check the CID lock? I'de like to try one of these cool ROM's I keep reading about.
unless you are planning on running the captivate on another carrier, you dont need to unlock it.
I was under the impression that I needed to CID unlock the phone to flash any ROM not produced or signed by the carrier. I thought SIM unlock was what allowed you to take the phone to another carrier?
As you can see, I know enough to be dangerous, but I'm slowly learning.
DaytonGuy said:
I was under the impression that I needed to CID unlock the phone to flash any ROM not produced or signed by the carrier. I thought SIM unlock was what allowed you to take the phone to another carrier?
As you can see, I know enough to be dangerous, but I'm slowly learning.
Click to expand...
Click to collapse
CID unlocks do not apply to Samsung phones.
once you have a kernel that has CWM built into it, you can start flashing. nothing else required. you dont even need root if you arent planning on using something like titanium backup before you flash.
Cool.
So any recomendations on my first custom ROM install?
I tried installing a custum boot animation last night and had no luck. I used CWM to flash the file I downloaded, but no change. I tried to copy a new customanimation.zip (I think that's what it's called I'm going from memory here) but I don't have RW access to the System folder. I tried using CWM to mount system and then fix permissions through recovery mode, but that doesn't do it. I'm using Droid Explorer to copy the file but it won't copy. There is a customamination.zip file in system/media so I tried to rename it .zp and it won't take. I assume that is a permissions thing.
I guess I'll try Root Exploer from the market. People seem to be having luck with that.
you cant use a bootanimation.zip on a stock kernel. It just be enabled in a custom kernel.
Go read some more bro. A LOT MORE.
OK. so it looks like I downloaded a custom animation zip file, but I need to flash a kernel that allows me to use the anmation. I ran across a post about that so I can find it.
Was was confusing to me was the uploader of the animation called it "flashable" so I thought that was the kernel and all, but I'm now guessing that by flashing it it simply installed it into the system/media folder for me???
Still looking for any suggestions for my first ROM.
Sorry for the long read, this is half rant and half question.
Alright, I got a captivate a long time ago (about a year and 3 months ago), loved it, rooted it and installed cyanogenmod as soon as I got home, changed roms and kernals constantly, did whatever I wanted to do.
About 3 months ago my screen stopped working.. So I take it in and they give me a refurb captivate, looked brand new so I didn't mind. However, when I tried to get into recovery it didn't work, the 3-button-method just wouldn't work at all, period, so I try to get it to work, gets stuck in bootloop.. pretty much every time I try to flash a rom something goes wrong and I get stuck in a bootloop but I can usually get into recovery or download mode because I had CWM.
So I'm on maxq's rom and it's working great for the past 2 months, decide not to mess with kernals or anything, however today I decided to try ICS, load it up, everything's fine, then I realize my soft keys aren't working, search for awhile, can't find anything, finally just manually start looking through the rom pages, and someone said that if you have the problem to just odin back to stock and try again.
I odin back to stock, but now 3 button combo doesn't work.. So more searching, find that I can run the 3e fix by TRusselo, doesn't work because I need root, more searching on how to root without recovery, find "SuperOneClick", root with superoneclick, then run 3e fix, everything is working fine, I check my email and load the ICS files onto SD card, go to restart and go into recovery mode.. Bricked, stuck in a bootloop, won't go to recovery, won't go to download, nothing.
Why the **** was I able to do anything I wanted with my old captivate, but if I even root this one it bricks? And what did I do to even brick it? I only ran the 2 programs and both of them worked flawlessly.
I guess my only option is to usb jig it, but honestly now I'm convinced that the phone is just faulty, I want to run the thing over.
-Pirate said:
So I'm on maxq's rom and it's working great for the past 2 months, decide not to mess with kernals or anything, however today I decided to try ICS, load it up, everything's fine, then I realize my soft keys aren't working, search for awhile, can't find anything, finally just manually start looking through the rom pages, and someone said that if you have the problem to just odin back to stock and try again.
Click to expand...
Click to collapse
If you would have actually searched you would have known it was a bug in the glitch. There are atleast 40 pages about that.
-Pirate said:
I odin back to stock, but now 3 button combo doesn't work.. So more searching, find that I can run the 3e fix by TRusselo, doesn't work because I need root, more searching on how to root without recovery, find "SuperOneClick", root with superoneclick, then run 3e fix, everything is working fine, I check my email and load the ICS files onto SD card, go to restart and go into recovery mode.. Bricked, stuck in a bootloop, won't go to recovery, won't go to download, nothing.
Click to expand...
Click to collapse
If you flashed ICS you should know it takes 2 flashes for it to work first time. Having a jig around is always a good idea as well.
-Pirate said:
Why the **** was I able to do anything I wanted with my old captivate, but if I even root this one it bricks? And what did I do to even brick it? I only ran the 2 programs and both of them worked flawlessly.
Click to expand...
Click to collapse
Stuff doesn't work as intended. Keep in mind everything is still in dev and not all devices are the same. But you should have searched a little more and it would have ran =/
U def don't need a jig. If it's booting it's not bricked. Try removing battery, start Odin, hold down power and down, plug in and put battery in. This should bring u to download mode.
prbassplayer said:
If you would have actually searched you would have known it was a bug in the glitch. There are atleast 40 pages about that.
Click to expand...
Click to collapse
I did start to see a few people with the problem, however many people do not follow up with what fixes their problem, and I did what a few people had said to do.
prbassplayer said:
If you flashed ICS you should know it takes 2 flashes for it to work first time. Having a jig around is always a good idea as well.
Click to expand...
Click to collapse
I should of mentioned that I did flash a few times, 3 total I think, it was getting stuck at boot.
prbassplayer said:
Stuff doesn't work as intended. Keep in mind everything is still in dev and not all devices are the same. But you should have searched a little more and it would have ran =/
Click to expand...
Click to collapse
I understand that **** happens but honestly my old captivate could always get into recover mode and download mode no matter what, it's extremely frustrating that something changed with the newer models. One of my questions was what caused the brick? I did nothing wrong from what I see and it was running perfectly until I tried to restart/boot into recovery.
Oh and mbc663, thanks but download mode doesn't work at all, nor does recovery obviously.
I can't say exactly what you are doing. Best advice I can do Re download your .zips Flash back to stock GB and try again.
-Pirate said:
About 3 months ago my screen stopped working.. So I take it in and they give me a refurb captivate, looked brand new so I didn't mind. However, when I tried to get into recovery it didn't work, the 3-button-method just wouldn't work at all, period, so I try to get it to work, gets stuck in bootloop.. pretty much every time I try to flash a rom something goes wrong and I get stuck in a bootloop but I can usually get into recovery or download mode because I had CWM.
So I'm on maxq's rom and it's working great for the past 2 months, decide not to mess with kernals or anything, however today I decided to try ICS, load it up, everything's fine, then I realize my soft keys aren't working, search for awhile, can't find anything, finally just manually start looking through the rom pages, and someone said that if you have the problem to just odin back to stock and try again.
I odin back to stock, but now 3 button combo doesn't work.. So more searching, find that I can run the 3e fix by TRusselo, doesn't work because I need root, more searching on how to root without recovery, find "SuperOneClick", root with superoneclick, then run 3e fix, everything is working fine, I check my email and load the ICS files onto SD card, go to restart and go into recovery mode.. Bricked, stuck in a bootloop, won't go to recovery, won't go to download, nothing.
Why the **** was I able to do anything I wanted with my old captivate, but if I even root this one it bricks? And what did I do to even brick it? I only ran the 2 programs and both of them worked flawlessly.
I guess my only option is to usb jig it, but honestly now I'm convinced that the phone is just faulty, I want to run the thing over.
Click to expand...
Click to collapse
Last year, I had issues with my original Cap, and got a "new" one. I learned that the bulk of the Caps going out as replacements are referbs. The one I got was a 1008 build, and does not have 3 button recovery. There are minor differences with each and every Cap that's out there. That's why some have issues with ROM's and some don't, some can over clock like crazy, and some can't at all. My guess is you have a 1008 as well, but that really doesn't matter. You just have a different device and as you seem to already have learned.
It sounds like there is more research you need to do. Even though the devices are a bit different, if you are having issues with ROM's loading, then I would say it's more of a procedure issue, than one with your device.
My procedure, is,
Remove SD/Micro SD
Odin1 Click to Stock JF6, and Master Clear(This will erase EVERYTHING)
Root with One-Click Root
Use Sideload Wonder Machine to install ROM Manager, copy update.zip and 3buttonFix to my SD, then reboot into recovery
Once in recovery I install the 3buttonFix, and install my new ROM
For me this has proven to be a very good method versus going from one ROM to another. The Master Clear cleans EVERYTHING off of your SD, so there is no chance for anything to corrupt your new install. Anytime I read a post of a install gone FUBAR, USUALLY a Flash To Stock/Master Clear (FTS/MC) fixes it
Before using Odin 1 Click, check your devices build number!! If it is higher than 1012, I would NOT recommend using 1 click, there is a higher chance of hard brick on the newer devices
Kangi...if you flash a firmware package without bootloaders, you won't have to do the 3 button fix every time. And if you keep a copy of the update.zip on your pc you don't have to even root, let alone bother with side loading ROM manager.
Cezar has a no boots jf6 and after you run that, you can still use master clear in one click.
Sounds like you got one of the refurbs that is missing the SBL. Have you looked at this thread? http://forum.xda-developers.com/showthread.php?t=1129821
I've not had this problem myself but it sounds like that might help. If I remember reading correctly, once this is flashed it should stick as long as you don't flash any other bootloaders on top of it.
Its not missing the sbl. The sbl it has doesn't respond to key combos. Derpa sherpa moment for samsung I guess?
Rofl yeah...if it was missing the sbl it would be fuggin bricked!
studacris said:
Kangi...if you flash a firmware package without bootloaders, you won't have to do the 3 button fix every time. And if you keep a copy of the update.zip on your pc you don't have to even root, let alone bother with side loading ROM manager.
Cezar has a no boots jf6 and after you run that, you can still use master clear in one click.
Click to expand...
Click to collapse
I know, thanks. I'm such a creature of habit, I started doing it like this a bit over a year ago, and has worked flawlessly for me(just jinxed myself!) so I never saw a reason to "fix what aint broke".
I'll take a look at Cezar's thanks!
Yeah, missing SBL was a poor choice of words. My bad.
kangi26 said:
Last year, I had issues with my original Cap, and got a "new" one. I learned that the bulk of the Caps going out as replacements are referbs. The one I got was a 1008 build, and does not have 3 button recovery. There are minor differences with each and every Cap that's out there. That's why some have issues with ROM's and some don't, some can over clock like crazy, and some can't at all. My guess is you have a 1008 as well, but that really doesn't matter. You just have a different device and as you seem to already have learned.
It sounds like there is more research you need to do. Even though the devices are a bit different, if you are having issues with ROM's loading, then I would say it's more of a procedure issue, than one with your device.
My procedure, is,
Remove SD/Micro SD
Odin1 Click to Stock JF6, and Master Clear(This will erase EVERYTHING)
Root with One-Click Root
Use Sideload Wonder Machine to install ROM Manager, copy update.zip and 3buttonFix to my SD, then reboot into recovery
Once in recovery I install the 3buttonFix, and install my new ROM
For me this has proven to be a very good method versus going from one ROM to another. The Master Clear cleans EVERYTHING off of your SD, so there is no chance for anything to corrupt your new install. Anytime I read a post of a install gone FUBAR, USUALLY a Flash To Stock/Master Clear (FTS/MC) fixes it
Before using Odin 1 Click, check your devices build number!! If it is higher than 1012, I would NOT recommend using 1 click, there is a higher chance of hard brick on the newer devices
Click to expand...
Click to collapse
I didn't think anyone else was going to reply to this thread, whoops.
Thank you for helping me, but I'm still having trouble.
Rom manager doesn't show up in Market, Sideload wonder machine tells me [INSTALL FAILED OLDER SDK] with any apk of Rom manager I find.
kangi26 said:
3buttonFix to my SD, then reboot into recovery
Click to expand...
Click to collapse
How do you reboot into recovery when 3buttonfix hasn't been applied yet?
This sucks and is extremely frustrating, I feel like my captivate is just trolling me.
-Pirate said:
I didn't think anyone else was going to reply to this thread, whoops.
Thank you for helping me, but I'm still having trouble.
Rom manager doesn't show up in Market, Sideload wonder machine tells me [INSTALL FAILED OLDER SDK] with any apk of Rom manager I find.
How do you reboot into recovery when 3buttonfix hasn't been applied yet?
This sucks and is extremely frustrating, I feel like my captivate is just trolling me.
Click to expand...
Click to collapse
When I get home later tonight I'll link you everything you'll need. Again, VERY important, what is your build number? If it's 1012 or higher, don't use Odin 1 click
Sent from a autonomous device
kangi26 said:
When I get home later tonight I'll link you everything you'll need. Again, VERY important, what is your build number? If it's 1012 or higher, don't use Odin 1 click
Sent from a autonomous device
Click to expand...
Click to collapse
Ok, finally got it working, I did exactly what you said, I found the rom manager 3.00.002 or whatever and that worked with sideloader, it took some messing around with but I'm running ICS now, thank you so much man, you've helped me so much, and now I can change roms and keep up to date without worrying about constantly soft-bricking.
As for my build number, I'm not sure, the only thing I see under build number in settings is: "IML74k"
-Pirate said:
Ok, finally got it working, I did exactly what you said, I found the rom manager 3.00.002 or whatever and that worked with sideloader, it took some messing around with but I'm running ICS now, thank you so much man, you've helped me so much, and now I can change roms and keep up to date without worrying about constantly soft-bricking.
As for my build number, I'm not sure, the only thing I see under build number in settings is: "IML74k"
Click to expand...
Click to collapse
The build number is actually under your battery, and looks like 10.06, 10.07, 10.08 and so on. It is the production date
Edit** And as a side note, do NOT try to use the 3buttonFix with a GB ROM, it WILL brick your phone in a really bad way. ONLY use it with 2.1 or 2.2
kangi26 said:
The build number is actually under your battery, and looks like 10.06, 10.07, 10.08 and so on. It is the production date
Edit** And as a side note, do NOT try to use the 3buttonFix with a GB ROM, it WILL brick your phone in a really bad way. ONLY use it with 2.1 or 2.2
Click to expand...
Click to collapse
Is it weird that I don't have a build number? It seems I can't post pictures without a few more posts, maybe this will work: deleted
And thanks for the warning on the 3buttonfix, I'm going to have to read more about bootloaders though, I don't understand what you and studacris were talking about earlier in the thread, haha.
-Pirate said:
Is it weird that I don't have a build number? It seems I can't post pictures without a few more posts, maybe this will work: imgurDOTcom/26sXGl.jpg
And thanks for the warning on the 3buttonfix, I'm going to have to read more about bootloaders though, I don't understand what you and studacris were talking about earlier in the thread, haha.
Click to expand...
Click to collapse
I havent seen that before, there doesnt seem to be a build#
Might want to pull that photo, it's not too good having your IMEI number publicly displayed
kangi26 said:
I havent seen that before, there doesnt seem to be a build#
Might want to pull that photo, it's not too good having your IMEI number publicly displayed
Click to expand...
Click to collapse
Maybe because it's a refurb? and whoops didn't think about that.
-Pirate said:
Maybe because it's a refurb? and whoops didn't think about that.
Click to expand...
Click to collapse
I'm not sure why, mine is a referb, and I have a sticker with mine on it. Ooh well, it is what it is
Sent from a autonomous device