I've scoured the internet in attempt to resolve this issue, and I know it's been talked about many a time before, but this just doesn't have an answer yet afaik.
Does anybody have any experience with fixing the inaccuracy of the touch screen after prolonged use? I love the nexus one, it's by far the best phone I've owned; but this little bug makes the phone completely unrealistic in real-world use.
If this isn't a software issue, it has to be something with the digitizer being powered off and back on to remove the accuracy bug. In that case, is there any low-level way to turn the digitizer off and back on as fast as possible every X seconds? That would mean losing touch capability for a few milliseconds, but is much better than locking and unlocking the phone each time it "goes wild."
I had given up all hope that this issue could be resolved in any fashion as dodgy hardware is, well...dodgy. Nothing can be done about it right?
I haven't had a screen wonk since starting in on the CM7 nightlies many moons ago!
IN YOUR FACE WONK!
Is there an FAQ about this digitizer issue?
JoeSchmoe007 said:
Is there an FAQ about this digitizer issue?
Click to expand...
Click to collapse
No, but it's been covered so extensively that nobody really mentions it any more. Either that or others have found what i have, that somehow the CM7 ROM mitigates the problem. Seriously, i haven't had an issue with it for months!
My particular N1 was never good with stock ROMs. Hated them and gave me endless trouble with one thing or another. It's the polar opposite for me with CM ROMs. Never any issues at all. No call or screen wonk, none of the bugs that others often complain about. It's like the phone has an attitude!
After flashing something ridiculous like 40+ CM7 Nightlies and stable releases, i've not had to wipe data once
DirkGently1 said:
No, but it's been covered so extensively that nobody really mentions it any more. Either that or others have found what i have, that somehow the CM7 ROM mitigates the problem. Seriously, i haven't had an issue with it for months!
My particular N1 was never good with stock ROMs. Hated them and gave me endless trouble with one thing or another. It's the polar opposite for me with CM ROMs. Never any issues at all. No call or screen wonk, none of the bugs that others often complain about. It's like the phone has an attitude!
After flashing something ridiculous like 40+ CM7 Nightlies and stable releases, i've not had to wipe data once
Click to expand...
Click to collapse
Can you please describe what the digitizer issue was/is? I just ordered N1 and haven't received it yet. And what about call wonk? I haven't seen anything about this one.
JoeSchmoe007 said:
Can you please describe what the digitizer issue was/is? I just ordered N1 and haven't received it yet. And what about call wonk? I haven't seen anything about this one.
Click to expand...
Click to collapse
Basically the digitizer has a couple of quirks. One is that after prolonged use (I found it to be completely random) the accuracy goes berserk, registering touches nowhere near they actually are. Secondly there is a switching of the axis when you cross two points: video. They are hardware related so there is no fix. The wonk is a problem with CyanogenMod7 specifically, causing black screens when receiving calls.
Personally I rarely if ever come across the digitizer problem and have never came across the wonk. They aren't deal breakers but can cause a few problems if you play a lot of multi-touch games.
Hollow.Droid said:
Basically the digitizer has a couple of quirks. One is that after prolonged use (I found it to be completely random) the accuracy goes berserk, registering touches nowhere near they actually are. Secondly there is a switching of the axis when you cross two points: video. They are hardware related so there is no fix. The wonk is a problem with CyanogenMod7 specifically, causing black screens when receiving calls.
Personally I rarely if ever come across the digitizer problem and have never came across the wonk. They aren't deal breakers but can cause a few problems if you play a lot of multi-touch games.
Click to expand...
Click to collapse
When accuracy goes berserk - does powering phone off/on help?
JoeSchmoe007 said:
Can you please describe what the digitizer issue was/is? I just ordered N1 and haven't received it yet. And what about call wonk? I haven't seen anything about this one.
Click to expand...
Click to collapse
Well, the touchscreen issue is nothing more than a bad digitizer that was released with the phone and never improved during manufacture of the device. All Nexii have the same one, although people suffered the problem in varying degrees. What would happen is every so often your touch on the screen would register in the wrong place so you may be selecting a shortcut on your homescreen to launch an app, but it might register the touch as being an inch higher/lower/somewhere random. the solution has always been to simply press the power button to turn the screen off/on again. This would fix the issue... until it occurred again.
The call wonk is really in two parts. Stock GB ROMs had a habit of introducing a slight delay in one party being able to hear the other during the start of a call. On CM7 ROMs it was a more significant issue of black screens and freezes during the start of a call. These didn't affect affect everyone though, and even Cyanogen himself didn't have it on on his own device.
EDIT: The other issue affecting the N1 was a weak, and often failing, power button. With the need to keep using it to fix the screen wonk the problem was made worse. That's why you might often see mentions of Trackball wake as it reduced the need to use the power button, therefore extending it's life. Trackball wake is only available on custom ROMs so bear that in mind too!
The phone isn't perfect but with the custom ROM devs doing there thing it's pretty decent for me
Hollow.Droid and DirkGently1 - I appreciate your responses.
Can I bring your attention to my other question to which nobody responded yet?
http://forum.xda-developers.com/showthread.php?t=1077733
JoeSchmoe007 said:
When accuracy goes berserk - does powering phone off/on help?
Click to expand...
Click to collapse
When the issue happens you just lock and unlock the screen to fix it. No need for a reboot.
This issue isn't really such a big deal. It happens once a week or so, and it takes a few seconds to black out the screen then unlock, problem gone.
Related
Recently, I've been considering getting a Nexus One, however, most of the reviews I read say that the N1's capacitive buttons are a little unresponsive. You must tap the upper half of the button as opposed to the bottom half of the button.
I've also read that some of the cyanogen roms have fixed this problem. Can anyone give me more insight on this issue?
I've never had a problem with mine.
I saw a review saying that they got in the way when typing w/ the onscreen keyboard, but I haven't even had that, and I'd like to think that I have pretty normal-sized fingers.
Some people have problems, others don't i personally haven't. I wouldn't consider it to be something important enough to sway me from a sale though.
Stock Rom had this issue. If you unlock your bootloader, all the kernels (and mods) available now have a fix for this, as well as a few other things.
Im sure when 2.2 update comes out this fix will be passed on to the stock version too (at least as far as im aware it hasnt already!?). So tbh this isnt an issue for you not to get a nexus one...also, there's no point getting a nexus one if ur too scared to unlock the bootloader!!
adam18488 said:
Stock Rom had this issue. If you unlock your bootloader, all the kernels (and mods) available now have a fix for this, as well as a few other things.
Im sure when 2.2 update comes out this fix will be passed on to the stock version too (at least as far as im aware it hasnt already!?). So tbh this isnt an issue for you not to get a nexus one...also, there's no point getting a nexus one if ur too scared to unlock the bootloader!!
Click to expand...
Click to collapse
Definitely! That's one of the biggest reasons why I want an N1. It has a good root and dev community and gets android updates first.
I just thought it'd be annoying to have to use a phone with crappy capacitive buttons, but I'm glad to hear that the problem has been fixed.
The only other thing I'm worried about is the dualtouch but it's most definitely going to get fixed in the next update.
Thanks to everyone for their input. I'll definitely be picking up an N1 soon
I have rooted and custom roms etc and I still hate the capacitive buttons with a passion. They are not nearly enough to topple the overall awesome that is the N1 but man I hate those things.
I only hate those buttons, when Nex is in my car mount!
adam18488 said:
Stock Rom had this issue. If you unlock your bootloader, all the kernels (and mods) available now have a fix for this, as well as a few other things.
Click to expand...
Click to collapse
Is this true? I've tried plenty of ROMs and kernels and I don't remember any of them changing the button sensitivity.
The best way to show off how frustrating the buttons can be is to give the phone to someone that's never played with it before and watch as they struggle to register touches on the buttons. The people that use the phone daily have recognized that the touchpad is above the button and never think about it any more.
It's very apparent as soon as you rotate the phone into a different position though.
PrawnPoBoy said:
Is this true? I've tried plenty of ROMs and kernels and I don't remember any of them changing the button sensitivity.
The best way to show off how frustrating the buttons can be is to give the phone to someone that's never played with it before and watch as they struggle to register touches on the buttons. The people that use the phone daily have recognized that the touchpad is above the button and never think about it any more.
It's very apparent as soon as you rotate the phone into a different position though.
Click to expand...
Click to collapse
I also haven't noticed any change in the sensitivity with different ROMs or kernels. For me though, sometimes if I hit right on top of the button it won't register. I am used to just tapping it a little above and it works everytime.
As others have said, this is definitely not a deal breaker for me or shouldn't be for any person IMO. This phone's pros far outweigh the cons.
The best way to show off how frustrating the buttons can be is to give the phone to someone that's never played with it before and watch as they struggle to register touches on the buttons. The people that use the phone daily have recognized that the touchpad is above the button and never think about it any more.
Click to expand...
Click to collapse
When someone is doing that you should just say that it has Finger print authentication technology
absolutely true and this was my discovery today (day 4 with n1). the buttons work fine if you cheat towards the top of the button area and overlap into the screen area.
that solved it for me.
resolved for me for now...
xboomer55 said:
absolutely true and this was my discovery today (day 4 with n1). the buttons work fine if you cheat towards the top of the button area and overlap into the screen area.
that solved it for me.
resolved for me for now...
Click to expand...
Click to collapse
Did you just buy your N1 from Google brand new?
Those buttons are a pain in the bum, but you get used to them, the bigger problem is if the phone gets too cold it starts mis-registering the touchscreen necessitating a reboot or a bunch of mucking around to fix it. This is the biggest annoyance with the phone for me, hopefully they fix the screen calibration in 2.2!
Almost swapped mine for a Desire, thinking less of doing so now, unless anyone can offer a good reason
I got my N1 straight from Google on day one, and I'm currently running CM 5.06
I find the capacitive buttons to be _awful_ if I tap directly on them it takes 2-5 attempts to get it to register.
However, I have found that if I swipe from the button down off the bottom of the button it registers ever single time.
I'm pretty convinced that the problem isn't the digitiser itself but in the driver that splits that section of the digitiser off. I believe it checks to see if there is upward movement before registering a button tap and if it does detect upward motion it cancels the tap event and forwards the event as a touch screen event. I also thing that because I have pretty big fingers any time I press the flattening of my finger registers as a slight upward motion.
If I could find the button "sub"-driver I'd be hacking at it right now.
Still, I wouldn't give up my N1.
SilentMobius said:
I got my N1 straight from Google on day one, and I'm currently running CM 5.06
I find the capacitive buttons to be _awful_ if I tap directly on them it takes 2-5 attempts to get it to register.
However, I have found that if I swipe from the button down off the bottom of the button it registers ever single time.
I'm pretty convinced that the problem isn't the digitiser itself but in the driver that splits that section of the digitiser off. I believe it checks to see if there is upward movement before registering a button tap and if it does detect upward motion it cancels the tap event and forwards the event as a touch screen event. I also thing that because I have pretty big fingers any time I press the flattening of my finger registers as a slight upward motion.
If I could find the button "sub"-driver I'd be hacking at it right now.
Still, I wouldn't give up my N1.
Click to expand...
Click to collapse
Just realized that!!
It does not get the upward movement
It gets: right, left & down
So this means, one could set different options for different directions...
hacker01 said:
Recently, I've been considering getting a Nexus One, however, most of the reviews I read say that the N1's capacitive buttons are a little unresponsive. You must tap the upper half of the button as opposed to the bottom half of the button.
I've also read that some of the cyanogen roms have fixed this problem. Can anyone give me more insight on this issue?
Click to expand...
Click to collapse
I have noticed no issues when holding the phone in my hands but the responsiveness is not that great if the phone is flat on a desk or a similar surface. I wonder what if anything the accelerometer may play a factor.
PrawnPoBoy said:
Is this true? I've tried plenty of ROMs and kernels and I don't remember any of them changing the button sensitivity.
The best way to show off how frustrating the buttons can be is to give the phone to someone that's never played with it before and watch as they struggle to register touches on the buttons. The people that use the phone daily have recognized that the touchpad is above the button and never think about it any more.
It's very apparent as soon as you rotate the phone into a different position though.
Click to expand...
Click to collapse
I dunna man, my 3-year-old daughter figured it out within a minute of getting my phone. I set her up in a game and she decided she wanted something else, so she messed with the capacitive buttons until she got out of the game. Once she had it once or twice (~5-10 seconds for her to figure out each time) it was pretty much instant after that. If a 3-yo can figure it out, I'm pretty sure it's not THAT difficult. Annoying, sure....but not difficult.
hacker01 said:
Did you just buy your N1 from Google brand new?
Click to expand...
Click to collapse
Yes. Direct from Google.
Wow there's definitely a good mix of answers. I thought that the newer batches of N1's fixed the capacitive button problem, but apparently not.
I guess there's not a definite answer. It seems the only conclusion you can make is that some N1's may still have the problem, some may not. Some can be fixed with custom roms and unlocking the bootloader and some cannot. Your results may very.
EDIT: After rereading some of the previous posts (more carefully. excuse my sleep deprived state lol), the capacitive button issue might actually be more of a feature than an issue. I've read similar posts about the capacitive buttons having that sort of "motion detection" thing to prevent accident presses. Hopefully for anyone still having the problem, you can reread some of the posts on this page and give their methods a try
I haven't had a problem with mine but I haven't had the problems most people say they have with the phone so I would recommend this phone to anyone that wants an android phone
-------------------------------------
Sent from my Nexus One
I know that this has been a fairly common complaint about the Nexus One but i'm wondering, roughly what percentage of people actually have this issue? To clarify, i mean the problem whereby touching the screen in one place is actually registering elsewhere on the screen.
I've had this problem since buying my n1 and having to constantly turn the screen off and back on again was driving me nuts. Finally i sent the unit back to Vodafone for repair and they in turn sent it to HTC to be fixed. So yesterday i got it back with an enclosed statement along the lines of "we have fixed your fault etc..".
Three minutes into using the damn thing and the fault crops up again. So much for that! To be fair to Vodafone they are sending out a replacement unit now but of course i'm concerned that even that will have the same issue.
What are the odds?
Here is the same.
To developers: the fact that resetting the screen fix the problem makes me to ask if there isn't a way to make the screen re-calibrate itself every X seconds/minutes, without shut off and on the screen every time. Seems to be until now the only solution to this extremely annoying issue.
It really is a bizarre one. I've seen people discussing whether it's a hardware or software issue but nobody seems to have a definitive answer. If it were a hardware problem, surely it would be constant/permanent? If it's a software issue i would have thought that somebody would have bug-fixed it by now? Especially as it seems so prevailant.
I'm stumped!
Other than this one problem though i am completely in love with this phone. The device itself feels solid, durable and pleasant to use. Android is improving all the time and it always impresses when you demonstrate to the un-initiated what the device is capable of. So close to perfect...but not quite!
EDIT... This from the wiki.. "- Q5: Sometimes my screen registers touches in incorrect places, and I need to turn the phone off and on to make it work correctly again
A: This is a hardware problem, nothing can be done about it. Nexus One's digitizer sucks.
Ho-Hum.
I have experienced this problem on android 2.1 ever since upgrading 2.2/2.2.1, I haven't had the problem. I'm very happy with my screen
Sent from my Nexus One using XDA App
msavic6 said:
I have experienced this problem on android 2.1 ever since upgrading 2.2/2.2.1, I haven't had the problem. I'm very happy with my screen
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
That suggests a software problem although i have had it on 2.1, 2.2 and now 2.2.1. I would say that it has happened to me within three minutes of using the phone, 50% of the time within that three minute window. In other words it's cropped up in half the texts/emails i have sent where i have had to do the screen off/on thing to complete the message.
Very annoying.
It has to do mostly with the way people hold their phones, the possibility of registering false touches - including, for example, touching the screen with fingers that aren't completely dry. Some have the issue more than others.
HW issues still can have SW workarounds sometimes. I'm not sure if it's the case. HW and SW need to be analyzed to find one, if exists.
There is no "calibrating" capacitive touchscreen. Resetting its controller might have effects like missing touches and other random screen misbehavior (for example - if the controller is tracking fingers, resetting it would cause it to lose the tracking).
Since getting my phone back from 'repair' the issue is less frequent, suggesting that it's not a usage problem as i'm obviously still using the phone in the same manner as before. Instead it seems that various devices suffer from the problem in varying degrees.
I suppose if i knew what they had actually done to the phone while it was being tended to it might help us discover why the frequency of the problem has been reduced. I know that the digitizer wasn't replaced as the phone came back with the same screen protector on it as it had when i sent it off. That being said, they obviously did something. I just don't know what!
Most probably replaced the phone's MB.
Try upgrading to the latest radio - the issue will probably not be 100% solved, but now I only get it maybe once a month or so...
I may tell them not to bother sending out a replacement. It's happening far less often since it was returned and (going by the poll results), there's a good chance that the replacement could actually be worse than this one is now.
Perhaps the 2.3 update will jar something loose.
ATTENTION PLEASE!!
after flashing miui latest ROM i've never had touchscreen issues anymore in over 20 hours of hard usage (also with the phone in charge!!).
I don't believe is a coincidence, developers please ask miui developers if they have integrated a code to fix this issues.
Thanks!
Sent from my Nexus One using XDA App
pyngwie said:
ATTENTION PLEASE!!
after flashing miui latest ROM i've never had touchscreen issues anymore in over 20 hours of hard usage (also with the phone in charge!!).
I don't believe is a coincidence, developers please ask miui developers if they have integrated a code to fix this issues.
Thanks!
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
could you please download Multitouch Visible Test
http://www.appbrain.com/app/multitouch-visible-test/com.batterypoweredgames.mtvistest
and report back?
xyellx said:
could you please download Multitouch Visible Test
http://www.appbrain.com/app/multitouch-visible-test/com.batterypoweredgames.mtvistest
and report back?
Click to expand...
Click to collapse
I have already restored cyano 6.1.1.
However, about "multitouch issues" I mean inaccuracy, the fact that the touch is recognised in another point of the screen (particularly when you press the bottom part of the panel). I didn't verified the axes-inversion issue, but I'm almost sure that it persists.
The "touch inaccuracy" is nothing else than the usual axis-swapping thing. When accidental dual touches (palm/holding fingers/water/etc) happen, the digitizer goes nuts.
Jack_R1 said:
The "touch inaccuracy" is nothing else than the usual axis-swapping thing. When accidental dual touches (palm/holding fingers/water/etc) happen, the digitizer goes nuts.
Click to expand...
Click to collapse
I don't think so....I pay attentions when the screen goes crazy. I'm absolutely sure that (in charge for example) my touch is ONE.
The only times I was able to trigger the "screen nuts" effect, were when I was typing 2-fingered, and fast - making it register dual touches. Moreover, sometimes a single touch with a single finger is reported as series of touches. Once it happens, it stays until screen off.
Jack_R1 said:
Moreover, sometimes a single touch with a single finger is reported as series of touches. Once it happens, it stays until screen off.
Click to expand...
Click to collapse
I mean this....since I moved to MIUI this is not happened anymore.
Since I uninstalled Htcime the inaccuracy issues seem less so far! Almost only with the phone under charge ...much much better than before! Dunno why....
Sent from my Nexus One using XDA App
Does upgrading the HBOOT help with the wonky touchscreen heat-related miscalibration issues that every Nexus owner knows about?
I raised this question on a different thread:
http://forum.xda-developers.com/showthread.php?t=903975&page=9
but wanted to throw this question out to a larger audience.
This week I finally got tired of having intermittent but definitive touchscreen miscalibrations, usually associated with charging and/or heavy usage. HTC shipped a swap for me to use.
The new one works pretty well, except the camera takes pinkish tinged images, so it unfortunately will be going back. However, I noticed that the HBOOT is the newer 0.35.0017 (though the date displayed by the bootloader screen is Jun 14, 2010).
So I upgraded the HBOOT on my original N1, and have been trying hard to reproduce the touchscreen craziness. So far I've been unable to do it.
It's difficult for me to make it happen on demand. I "stress tested" it essentially by doing the things that normally bring it on, GPS with charger, and graphics intensive games. But I'm getting really tired of beating angry birds again and again =P
So, if you're still experiencing touchscreen wonkiness that is fixed by turning on and off the screen, which HBOOT do you have?
There are of course many other potential mitigating factors I've thought about. Custom ROMS. Kernels. Touchscreen protector. Radio version.
Just for completeness, there are different part numbers on the two:
Original N1 part # 99hke002-00 F
Replacement N1 part # 99hke002-01
Who knows what the significance of that is.
No it doesn't.
Well shucks, I'm finding it harder and harder to get my touchscreen to screw up. I guess I should be glad!
How often does yours go off?
You know, as strange as it sounds, since I upgraded to the 0.35 HBOOT about a month ago, I have had zero issue with the digitizer. Call it coincidence, but that is what's happening so far.
We will call it coincidence for now =)
A happy coincidence.
waylo said:
Well shucks, I'm finding it harder and harder to get my touchscreen to screw up. I guess I should be glad!
How often does yours go off?
Click to expand...
Click to collapse
Not very often, in fact think it hadn't done it over the past week. I've been using the crap out of it customizing CM7 over this weekend and no hiccups.
our touch screen is always a hardware problem..
That's not the question. The question is if you're still having a lot of problems with your touch screen, which hboot do you have?
I was actually kinda wondering the same thing. I finally got around to putting on CM7 (build 39) on Friday (coming from CM 6.1). I right away had the impression that the screen was more responsive (the notification drop-down bar tipped me off) and I have not had a single episode of wonkiness with the screen since. CM 6.1 was a little weird for me and I had screen issues (especially the drop-down).
Oh well, even if it isn't the HBOOT, something has changed for the better for now
Another thing I learned recently is that on the native google navigation app, there seems to be a touchscreen dead zone directly vertical in the center of the screen (in landscape mode at least). It basically corresponds to the current street you're on if your navigation is active and your path is straight ahead.
So if you touch there and try to shift the screen around, you might mistakenly think the whole screen is awry. I think this is by design.
I'm not sure why it's there but it reliably is unresponsive to drags. So I'm not using that center area to gauge if my screens gone wonky.
Now if you hit the menu button, the buttons centrally do respond to taps.
Just had my first case of misregistering digitizer in a while. But instead of the whole bottom 1/3 of the screen going stupid it was just the bottom right corner, around the enter button/backspace if you have a portrait keyboard.
Oh well, it still works better than stock eclair!
So just as an update, the HBOOT definitely does not rid the digitizer issues plaguing everyone. It seems actually that my kernel had more of say in when/how often the issue surfaces.
I found that on Enom's Froyo ROM, problems arose more often with stock Enom than Pershoot or Wildmonks. However, each kernel has its own benefits.
Does anyone have issues with the touchscreen skipping every once in a while? Occasionally, there is an area on the lower half of the screen that seems to be insensitive, but if you start touching around it, it goes back to normal.
I've discussed this with some fellow Z1 owners and it appears to be a relatively common issue. There is some discussion that it may be due to overheating or a software issue.
Anyone else have this problem?
Had this once while my device overheated hard(~47-48°).
Not sure if I have to be concerned about that, because otherwise it works fine.
koopa101 said:
Does anyone have issues with the touchscreen skipping every once in a while? Occasionally, there is an area on the lower half of the screen that seems to be insensitive, but if you start touching around it, it goes back to normal.
I've discussed this with some fellow Z1 owners and it appears to be a relatively common issue. There is some discussion that it may be due to overheating or a software issue.
Anyone else have this problem?
Click to expand...
Click to collapse
Same here
Sent from my C6903 using XDA Premium 4 mobile app
At first I thought it was an issue with crappy screen protectors. The Z1 already has a anti-crack film on the screen so I thought that adding a poorly made screen protector would create too much distance from my touch to the sensor. However, I've tried replacing the screen protector and also asked other people with varying brands of screen protectors and it seems that the issue still persists.
The issue seems to occur most often on the password screen for me (which is particularly annoying).
I've had it too, lower half of screen does not register slides on login screen for a brief moment.. No overheat!
Sent from my C6903 using Tapatalk
No overheat here 2 but with the same issue.
Also the last days i think that all the screen sometimes is more insensitive than usual.I have to touch 2-3 times to do what i want.
I think that is a hardware issue.
Have it sometimes as well sadly! Can't figure out when exactly it's happening though..
I find it very annoying when I'm scrolling and at the bottom part of the screen, the scrolling becomes a click, which brings me to a place I did not intend to go to. Hope it's software, but can't imagine that.
Happens to me as well, regardless of device temperature. Based on the seemingly random nature of the issue, it should be a simple fix via software update. A similar bug persisted on the 2013 Nexus 7 devices when you laid them flat on a surface.
koopa101 said:
Does anyone have issues with the touchscreen skipping every once in a while? Occasionally, there is an area on the lower half of the screen that seems to be insensitive, but if you start touching around it, it goes back to normal.
I've discussed this with some fellow Z1 owners and it appears to be a relatively common issue. There is some discussion that it may be due to overheating or a software issue.
Anyone else have this problem?
Click to expand...
Click to collapse
Same problem here!!!
I think is a hardware issue. When you touch the alu frame the phone works fine. If the phone is on the table or in a cover the issue are immediately there.
Sorry for my bad english. Hope you understand
I noticed some small things and thought it was me but I guess this makes sense.
Could be worse, my previous Note 3 had multitouch issues and had problems register several fingers :silly:
Considering how common the issue appears to be, I find it hard to believe that this is a hardware issue.
I also don't believe it's related to overheating since it seems to happen even when I haven't used the phone at all for a long time.
It feels like a software issue to me since the issue sends to go away if you touch another section of your screen
koopa101 said:
Considering how common the issue appears to be, I find it hard to believe that this is a hardware issue.
I also don't believe it's related to overheating since it seems to happen even when I haven't used the phone at all for a long time.
It feels like a software issue to me since the issue sends to go away if you touch another section of your screen
Click to expand...
Click to collapse
When you touch the alu frame the issue is not there. Only when you use phone without touching the frame.
Must be some kind of hardware issue...
Sent from my iPad using Tapatalk HD
I am having the exact same issue. The weird thing is, is that it doesn't always fail to register my finger. I've gone a few days without it, then suddenly it's back again. Also in the Xperia Diagnostics app I could then see the phone failing to register a proper line, then 20 seconds later it's gone. Weird thing indeed.
Sent from my C6903 using XDA Premium 4 mobile app
nonamedk said:
When you touch the alu frame the issue is not there. Only when you use phone without touching the frame.
Must be some kind of hardware issue...
Sent from my iPad using Tapatalk HD
Click to expand...
Click to collapse
Is this the case? I don't think I've ever used my phone without touching the frame somehow.
koopa101 said:
Does anyone have issues with the touchscreen skipping every once in a while? Occasionally, there is an area on the lower half of the screen that seems to be insensitive, but if you start touching around it, it goes back to normal.
I've discussed this with some fellow Z1 owners and it appears to be a relatively common issue. There is some discussion that it may be due to overheating or a software issue.
Anyone else have this problem?
Click to expand...
Click to collapse
Yes, I have it as well.. First of all though, to reply to a lot of people on this thread, it happens regardless of "flat surface, touching the frame, overheating", or anything else. It seems to be completely random with me. Sometimes everything is perfect, then it goes nuts for no apparent reason whatsoever. I'm almost sure it's a software issue, and hope sony will address this issue soon!
it also happens sometimes to me.
the only thing that helps is to touch the ground of the ac power socket. it seems like the screen needs much more potential difference between the pointer and the screen itself and after a while of using it the pointer (you and your fingers) are more loaded.
thats my theory to it.
Jimmyness said:
Yes, I have it as well.. First of all though, to reply to a lot of people on this thread, it happens regardless of "flat surface, touching the frame, overheating", or anything else. It seems to be completely random with me. Sometimes everything is perfect, then it goes nuts for no apparent reason whatsoever. I'm almost sure it's a software issue, and hope sony will address this issue soon!
Click to expand...
Click to collapse
Unfortunately, unlike the rooting camera bug, it doesn't sound like Sony has even acknowledge it at all.
Exactly this.
http://www.youtube.com/watch?v=h0sqwwUoEPc
I often have to attempt inputting my password multiple times before I can finally get it right. I have since switched to PIN unlock. Really wish there was some sort of response from Sony.
I'd you're using pie then stop using it and retry the affected area. I had this issues because of the activation area causing certain keys on the keyboard to become non responsive.
Sent from my Z1.
Has anyone tryed the touchfwtool?
URL itechdestiny.com/xperia-touch-screen-solution-touchfwtools-apk-download/
My phone is on the way back from repair. They only have calibrated the screen.
I've experienced some serious touch issues in the past two days. It's happened very randomly and I can't replicate the issues. The screen losses touch sensitivity and I can't do anything, then it randomly comes back after 10 seconds only to animate every touch I made during the 10 second lull.
Has anyone had any touch issues like me?
Edit: disregard this post. got the forums mixed up with another device.
bryancotton84 said:
I've experienced some serious touch issues in the past two days. It's happened very randomly and I can't replicate the issues. The screen losses touch sensitivity and I can't do anything, then it randomly comes back after 10 seconds only to animate every touch I made during the 10 second lull.
Has anyone had any touch issues like me?
Click to expand...
Click to collapse
sounds like a software glitch, is anything eating up the processor?
I'm on LRX210 out of the box. I haven't had any battery stat app running but nothing unusual is going on in the regular battery app
I have this issue as well. Drives me nuts when I'm playing clash of clans. Found a sprint forum post that says it could relate to screen protectors? I have an invisible shield on right now.
Mauk80 said:
I have this issue as well. Drives me nuts when I'm playing clash of clans. Found a sprint forum post that says it could relate to screen protectors? I have an invisible shield on right now.
Click to expand...
Click to collapse
I have a screen protector but I've never had issues with it before. The touchscreen is COMPLETELY unresponsive 100% of the time
cowkong said:
I have a screen protector but I've never had issues with it before. The touchscreen is COMPLETELY unresponsive 100% of the time
Click to expand...
Click to collapse
Have you updated to 5.1? Since 5.1, there were significant changes that appear to have been made to proximity sensor that seem to be affected by any sort of screen protector that may cover it. If your protector covers the sensor, then I suggest removing it.
I haven't. I currently have the notification on my lockscreen (since I can still use the power button and view that basic info). It simply just stopped working while I was using it. Going into the Sprint store early this afternoon
My N6 arrived yesterday and was immediately unusable. The keyboard filled in a ton of garbage when I was asked to first enter my name ... Power cycled to try again and have had nothing but reliability issues with typing at times the screen will lock while trying to type (no response) or assume I've clicked when I haven't which makes accurate data entry impossible.
wiped, reset and upgraded software from 5.0 to 5.01 to 5.1 - had to remove my ATT sim which initially blocked this process and reset. Issues are still present seems like the screen is defective.
Support has issued an RMA to return the device after suggesting they would replace. Not a great start.
im having the same issue with my nexus, i went back to stock, not even rooted anymore, still doing it, its driving me nuts..
RMA. It's quite obvious you have a hardware problem.
graydiggy said:
RMA. It's quite obvious you have a hardware problem.
Click to expand...
Click to collapse
I'm actually not so sure that it is. I've seen this issue intermittently across 3 different devices, but only on 5.1.1 firmwares.
semperfi123 said:
I'm actually not so sure that it is. I've seen this issue intermittently across 3 different devices, but only on 5.1.1 firmwares.
Click to expand...
Click to collapse
Although we're in an pls thread, I tend to agree. If it was a hardware issue, I don't think we'd see the OS acting out the touches later.. It means the hardware actually accepted the input but the OS didn't do any thing., Likely an OS hang or something.
bryancotton84 said:
I've experienced some serious touch issues in the past two days. It's happened very randomly and I can't replicate the issues. The screen losses touch sensitivity and I can't do anything, then it randomly comes back after 10 seconds only to animate every touch I made during the 10 second lull.
Has anyone had any touch issues like me?
Click to expand...
Click to collapse
I have a Samsung Tab 3 and recently the touch screen has gone haywire. I drop a troop at 12oc and heal spell drops randomly at 6oc or wherever. I click on the screen and the screen zooms in and out irradictly . Trying to do a raid must less a war attack is impossible. Anyone have the same issues?
[email protected] said:
I have a Samsung Tab 3 and recently the touch screen has gone haywire. I drop a troop at 12oc and heal spell drops randomly at 6oc or wherever. I click on the screen and the screen zooms in and out irradictly . Trying to do a raid must less a war attack is impossible. Anyone have the same issues?
Click to expand...
Click to collapse
This is a N6 thread [emoji4]