I have been through a mess of attempts to root my phone and put it into 2e recovery so I could install custom mods, and ended up with nothing but an old version because I had to flash it on to be able to use it.
I'll try to explain the process.. first I had 2.2 firmware with JPC, was rooted already with superuser and then I tried to flash it into 2e recovery but when it finished the phone booted up, got in the main screen where you swipe the screen to unlock but got stuck there after a couple seconds, started vibrating randomly and shut down.
After that happened I flashed an original i9000 tar on it and it came back to life, unrooted and in JP6.
The first time I tried to flash it into 2e I forgot to run odin as an admin, so I thought that was my mistake so I went ahead and tried it again with a JP6 version and ran odin as admin, but the same exact thing happened... gets stuck in the same place so I flashed the original again.
I'm on a EU Galaxy S I9000 JP6 Froyo.
Anyone have an idea what I'm doing wrong?
SmokeyFish said:
I have been through a mess of attempts to root my phone and put it into 2e recovery so I could install custom mods, and ended up with nothing but an old version because I had to flash it on to be able to use it.
I'll try to explain the process.. first I had 2.2 firmware with JPC, was rooted already with superuser and then I tried to flash it into 2e recovery but when it finished the phone booted up, got in the main screen where you swipe the screen to unlock but got stuck there after a couple seconds, started vibrating randomly and shut down.
After that happened I flashed an original i9000 tar on it and it came back to life, unrooted and in JP6.
The first time I tried to flash it into 2e I forgot to run odin as an admin, so I thought that was my mistake so I went ahead and tried it again with a JP6 version and ran odin as admin, but the same exact thing happened... gets stuck in the same place so I flashed the original again.
I'm on a EU Galaxy S I9000 JP6 Froyo.
Anyone have an idea what I'm doing wrong?
Click to expand...
Click to collapse
do you want to stay on 2.2.1 or want to switch to GB...
if you can still get into dowloadmode (vol down / home / power)
froyo XXJPU : http://dl.dropbox.com/u/19506141/Stock - stock modems/I9000XXJPU (2.2.1).exe
GB XWJVH : http://dl.dropbox.com/u/19506141/Stock - stock modems/GT_I9000_XWJVH_XXJVO_NEEJV3_Sbl.exe
flas with odin : http://dl.dropbox.com/u/19506141/flash en drivers/Odin_+_pit.exe
PIT512 file is included, both firmwares come with safe bootloaders.
flash files with repatition checked.
and if you need them samsung drivers for PC :
http://dl.dropbox.com/u/19506141/flash en drivers/SAMSUNG_USB_Driver_for_Mobile_Phones.exe
for rooting your phone you can use
froyo : http://dl.dropbox.com/u/19506141/speedmod-kernel-k13e-500hz.tar
GB JVH :http://dl.dropbox.com/u/19506141/Gingerbread-GT-I9000-XWJVH-stock-kernel+hacks.tar
flash in PDA using odin.Do NOT check repartition....
Thanks for the reply..
I don't want to make any mistakes, as im quite new to this phone and hacking/updating/putting new **** on it, so can you be a little more clear on the steps to take? I'm obviously going to upgrade to GB...
I can get into download mode fine, do I flash the 512 PIT file and the PDA_XWJVH_Sbl.tar.md5 file together? also just to make absolutely sure because I heard the partition thing can brick my phone, should it be checked for this particular flash?
SmokeyFish said:
Thanks for the reply..
I don't want to make any mistakes, as im quite new to this phone and hacking/updating/putting new **** on it, so can you be a little more clear on the steps to take? I'm obviously going to upgrade to GB...
I can get into download mode fine, do I flash the 512 PIT file and the PDA_XWJVH_Sbl.tar.md5 file together? also just to make absolutely sure because I heard the partition thing can brick my phone, should it be checked for this particular flash?
Click to expand...
Click to collapse
You should only use the repartition option when flashing a 3 file firmware. You can get them from samfirmware.com. The JVB firmware has all 3 files so I would download it.
Once downloaded open Odin and stick the files in the required fields. Insert your .pit file and select repart.
Once you have booted in to JVB you can then flash JVH using Odin in the PDA field with NO repartition.
Once booted into JVH I would use CF Root kernal to get root access
Go to insanity thread and check out the link to Ezbase rom, its a cinge! Noob too!
Sent from my GT-I9000 using XDA App
slaphead20 said:
Go to insanity thread and check out the link to Ezbase rom, its a cinge! Noob too!
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
yes i second that,,got me ouy of trouble a few times
Related
this is what happened
i installed sgs tools...tried the hacked camera.apk
since that was not working, i tried reverting it by running the restore script....
when i opened camera, my screen became black and it has stayed ever since...
i restart my phone and it shows the boot screen, the s shimmers for a long time and then black screen again....
and i cant seem to get into recovery mode.... i have tried many times...
EDIT:got into recovery mode after 100 tries....what do i do now?
i have tried wiping data, and clearing the cache....doesnt solve the issue...
my phone is rooted.....i dont think i'll have warranty..
please help!!!!!
if you have 3 button combo working (download mode working) find some rom which you want to install and do it by odin.
best to find middle package (Richtchofen ones with his instructions, they quite plain and simple)
you could try put only pda part of the rom without repartition
if it will be stock room the same as you have now in your phone your warranty will be untouch
Sent from my GT-I9000 using Tapatalk
If you were on froyo flash back stock rom (2.1) but first flash 512 pit file with pit, then the phone is,only startable in download mode, then flash stock rom with repartion and,everything ticked..
btw i had oclf by ryan installed...
what should i do?
i do not wanna brick my phone
i downloaded samsung's latest froyo firmware to install?
should i refrain from installing that?
sidh10 said:
btw i had oclf by ryan installed...
what should i do?
i do not wanna brick my phone
i downloaded samsung's latest froyo firmware to install?
should i refrain from installing that?
Click to expand...
Click to collapse
just wipe cache and memory then flash to stock rom not froyo it will not help so go eclair then froyo
Ajjter said:
just wipe cache and memory then flash to stock rom not froyo it will not help so go eclair then froyo
Click to expand...
Click to collapse
i tried flashing froyo....it didnt work...just as you said it wouldnt...it starts up and vibrates randomly.......will try eclair now...hope it works....finally...
there wont be any problems flashing now will there?
i tried eclair...
it has three files....
i am stuck on partition since 15 mins...what to do?please please help.
No make sure you flash the stock fw and use the 512 pit and have all options,ticked
Just find and read instruction how to proper repartition phone and flash it in Richtrofen posts (short and simple) which include links to roms.
do as it said and your phone will be working fine. mine was exactly on the same state few times and repartition with stock rom always helped
sent from my i9000 running stock 2.2.1 froyo using tapatalk
it finally worked!!!!!!!!!!!!!yes yes yes!
thank you thank you! though i did have to start with chinese....and i took a long time to boot...
Hehe dont use oclf use voodoo lag fix on 2.2 instead mate
Hi guys i searched for other threds before making this one but none of them had download mode working
i tried flashing jpy and jpx with odin using the 512 and the 813 pit files, my problem is that after showing the sgs screen(really effing loud) the screen goes dark and vibrates in a pattern that goes like ........1....2................1...2...........1............2 and repeats, i can accces both the download and recovery modes
Extra maybe important info:
came eclair jm4 flashed with kies then from jm7 i think with the bujp5 modem(the vodafone one) tried to flash jpy & jpx still stuck on darkscreen
in odin i only had the pit+pda checked with repartition, autoreboot and f.reset time ticked. Did i miss something?
I also tried to flash jpo, no dice.
Try to flash an other firmware (2.1)
Take it from samfirmware
They supply 3in1 packages that need to be put in only pda
Use pit 512
Repartition
If that worked, then try a 2.2(.1)
______________________________
Send from my shiny gadget!
Cypher_X said:
Try to flash an other firmware (2.1)
Take it from samfirmware
They supply 3in1 packages that need to be put in only pda
Use pit 512
Repartition
If that worked, then try a 2.2(.1)
______________________________
Send from my shiny gadget!
Click to expand...
Click to collapse
As Cypher_X said try 2.1 i always go jm8 never failed me
Ok thanks gonna try with that
Sent from my X10i using XDA App
Ok that worked booted up perfectly fine but....I retried flashing jpy and I keep getting the damm dark screen could the file be corrupted or something? Also don't know if this is normal but after flashing I always get booted up in recovery that didn't happen when on kies again don't know if this is normal
calexus1182 said:
Ok that worked booted up perfectly fine but....I retried flashing jpy and I keep getting the damm dark screen could the file be corrupted or something? Also don't know if this is normal but after flashing I always get booted up in recovery that didn't happen when on kies again don't know if this is normal
Click to expand...
Click to collapse
Where did you get jpy from? I got mine from samfirmware and had no dramas. Went from jm8 to jpy you could always flash a 2e recovery kernel cf root for example then install cwm so you can install custom jpy roms..i use darkys and love it
Got it working : D For any future reference flash jm8 with repartition on then jpy with repartition off...
on another note what do I do when I already have jpy working and want a clean instal of it plus different modem and kernel? (repartition on/off, do I use any pit files ?
Happy new year
can someone please tell me where to get these files from?
i've searched but keep getting the wrong pit or stock firmware..
i'm a noob and i'm confused, excuse me of my ignorance but i've tried sooo much lol
btw i have a bell I9000M which i think is my problem.. help
I messed up my Bell SGS playing with odin.
Lost the 3 button options and ended up hacking a jig to get it into DL mode. done
Goal - a Functioning phone. Now what?
Thinking I should odin the I9000M_JL2_JL2_JL2_JL2_UG_BMC.tar.
But with or without repartition?
Can I use any 512pit?
I think repartitioning is where i messed it up.
Now all of this happened because I wanted seeARMS.JL2.v0.4 but couldn't update with the <3e> recovery mode.
Knowing that seeArms is my second (first?) goal, is there a different firmware I should flash something other than BMC to give me back update functions, but stable to resuscitate my phone?
There's ages of material here and I don't want brick my phone or waste time, I've done enough of that by myself.. now I'm looking for some expert opinion.
thanks
Best option for bell users is darkys rom. For further info check darky's rom info
Lyon huntington said:
I messed up my Bell SGS playing with odin.
Lost the 3 button options and ended up hacking a jig to get it into DL mode. done
Goal - a Functioning phone. Now what?
Thinking I should odin the I9000M_JL2_JL2_JL2_JL2_UG_BMC.tar.
But with or without repartition?
Can I use any 512pit?
I think repartitioning is where i messed it up.
Now all of this happened because I wanted seeARMS.JL2.v0.4 but couldn't update with the <3e> recovery mode.
Knowing that seeArms is my second (first?) goal, is there a different firmware I should flash something other than BMC to give me back update functions, but stable to resuscitate my phone?
There's ages of material here and I don't want brick my phone or waste time, I've done enough of that by myself.. now I'm looking for some expert opinion.
thanks
Click to expand...
Click to collapse
Sent from my GT-I9000 using XDA App
Lyon huntington said:
I messed up my Bell SGS playing with odin.
Lost the 3 button options and ended up hacking a jig to get it into DL mode. done
Goal - a Functioning phone. Now what?
Thinking I should odin the I9000M_JL2_JL2_JL2_JL2_UG_BMC.tar.
But with or without repartition?
Can I use any 512pit?
I think repartitioning is where i messed it up.
Now all of this happened because I wanted seeARMS.JL2.v0.4 but couldn't update with the recovery mode.
Knowing that seeArms is my second (first?) goal, is there a different firmware I should flash something other than BMC to give me back update functions, but stable to resuscitate my phone?
There's ages of material here and I don't want brick my phone or waste time, I've done enough of that by myself.. now I'm looking for some expert opinion.
thanks
Click to expand...
Click to collapse
Flash the stock JL2 firmware with Odin the use super one click to root your phone then flash a new kernel with SGS Kernal flasher from the market... then u will have clockwork recovery then wipe and flash seeArms! Its a great rom but not as fast as darkys
Get the stock firmware from samfirmware.com u can get the .pit file from there to
Sent from my bell GT-I9000m using XDA App
repartition yes? .pit universal?
Jason123420 said:
Flash the stock JL2 firmware with Odin the use super one click to root your phone then flash a new kernel with SGS Kernal flasher from the market... then u will have clockwork recovery then wipe and flash seeArms! Its a great rom but not as fast as darkys
Get the stock firmware from samfirmware.com u can get the .pit file from there to
Sent from my bell GT-I9000m using XDA App
Click to expand...
Click to collapse
So the stock JL2 that I have is a .tar and .dll
I have a 512.pit from a beta 2.2 , are they different?
Did I mention boot problems too? Hanging @ Samsung, no splash ani.
I guess the .pit means yes on repartition?
Thanks
Just use the stock firmware and .pit from samfirmware.com and when Odin is open do not tick off repartirion... just put the .pit in it's spot and the tar in th's PDA part and flash
Sent from my GT-I9000 using XDA App
Now I'm no pro... I just flashed a rom once and got stuck in a boot loop and this is what worked for me
Sent from my GT-I9000 using XDA App
Recovery back but can't mount /dev/block/stl10
Decided to try Darkys v9.2 Resurrection.. no go.
Flashed JL2 and got recovery back but crash after animation.
3e recovery shows me Can't mount /dev/block/stl10.
some threads say dead, others make ref. to old builds.
any current ideas?
thanks
Sorry man like I said I'm no pro... ide flash stock jl2 back and send it back to Samsung for repair maybe they will do something for your warranty
Sent from my GT-I9000 using XDA App
Lyon huntington said:
Decided to try Darkys v9.2 Resurrection.. no go.
Flashed JL2 and got recovery back but crash after animation.
3e recovery shows me Can't mount /dev/block/stl10.
some threads say dead, others make ref. to old builds.
any current ideas?
thanks
Click to expand...
Click to collapse
Download a full firmware for your model and locale (with dbdata in it) and flash it with repartition with the pit proposed (samfirmware.com) then, I believe, you will have a full functioning phone. If everything is ok, then flash ... whatever.
It's Alive! - Can't mount /dev/block/stl10 fixed.
Hey All,
Got it all working again.
Repaired: Can't mount /dev/block/stl10
the fix: A full firmware (pda/csc/phone/pit) flash w/repartition.
Flashed w/repartition - I9000XXJP2.7p. (the only FULL firmware I had on-hand)
on reboot the system does a media check and was successful in reformatting and mounting the internal SD.
Phone didn't like the ROM and still logo of death, but..
A quick Jig into Download Mode..
Flashed I9000UGJL2_homebinary_add_param.tar with no repartition
(can't remember if I used .pit).
And Success!! my phone is alive and running 2.2
Thanks for the help, and hopefully this thread can help others.
Everyone should build/get a jig
There is nothing more awesome than being able to force download your non-booting phone.
I could not have done this repair without one.
http://forum.xda-developers.com/showthread.php?t=819551.
The only problem now is it's back to stock...
oh phone, how can I crash you next?
thanks again everybody!
tsinc said:
Download a full firmware for your model and locale (with dbdata in it) and flash it with repartition with the pit proposed (samfirmware.com) then, I believe, you will have a full functioning phone. If everything is ok, then flash ... whatever.
Click to expand...
Click to collapse
Yes, do this. For repartition to work the .tar has to have dbdata.rfs, otherwise it won't work.
Then flash a speedmod kernel with odin for root/cwm and flash you're favourite custom rom
unlock&root owngrade or speedmod kernel? suggestions?
Forgot to mention that all this started after I got the phone back from Bell service after SD card failure.
I know mod methods changed with the latest firmware, as I had used the update.zip method that is now unavailable.
My phone went in unlocked and rooted
the phone came back re-locked (old code doesn't work? wtf?),
and it was unrooted w/3e recovery
Can the phone unlock code change?
Will downgrading to 2.1 make unlocking easier?
or is unlocking just as simple after a speedmod kernel with odin for root/cwm
Which is better?
downgrade the firmware to 2.1 and root using the old update.zip method or speedmod kernel?
Which kernel? (link please )
cheers
Lyon huntington said:
Hey All,
Got it all working again.
Repaired: Can't mount /dev/block/stl10
the fix: A full firmware (pda/csc/phone/pit) flash w/repartition.
Flashed w/repartition - I9000XXJP2.7p. (the only FULL firmware I had on-hand)
on reboot the system does a media check and was successful in reformatting and mounting the internal SD.
Phone didn't like the ROM and still logo of death, but..
A quick Jig into Download Mode..
Flashed I9000UGJL2_homebinary_add_param.tar with no repartition
(can't remember if I used .pit).
And Success!! my phone is alive and running 2.2
Thanks for the help, and hopefully this thread can help others.
Everyone should build/get a jig
There is nothing more awesome than being able to force download your non-booting phone.
I could not have done this repair without one.
http://forum.xda-developers.com/showthread.php?t=819551.
The only problem now is it's back to stock...
oh phone, how can I crash you next?
thanks again everybody!
Click to expand...
Click to collapse
All you did was flash UGJL2 with no repartition and it brought your phone back?
Kops said:
All you did was flash UGJL2 with no repartition and it brought your phone back?
Click to expand...
Click to collapse
You know what....I've been trying various combinations of CSC/MODEM/PIT and everything to get this phone running again.
All I did was select a FULL UGJL2, and thats IT. NO pit, NO repartition, and it worked
The best way to revive your I9000m is to first flash JPC (a three file ROM) with 512 PIT and repartition ticked. The phone will still be in a boot loop. Then flash the JL2 PDA without repartition or PIT. The best way to go back to stock! Has always worked for me. I9000m's are not the same as other I9000's and do not flash repartition and the PDA in the same flash! Good luck!
Today, my phone became laggy and I restarted my phone, however it didn't boot past the samsung galaxy s i900m screen. It never reaches the animation screen.
This happened before and after hours of trying different methods i sent it in to get fixed but now it has happened again and i want to see if i can fix it myself.
I have tried to flash it with I9000UGKC1 without any PIT file and repartition unticked and odin had completed it successfully but the phone just cycles back into the boot screen.
Ive tried flashing it again with the same firmware and a 512 PIT file with repartition ticked and unticked but its always the same result.
Is there anything I am doing wrong or are there any other suggestions?
p.s I have rooted the phone and applied a lagfix.
Thanks in advance.
Rule one before flashing UNDO LAGFIX lagfix F**** your install .
jje
Hi dude,
Try flashing with the ODIN included.
Hopefully, it will fix your problem
P.S. if nothing works try flashing Darky's resurrection edition
http://forum.xda-developers.com/showthread.php?t=940671&highlight=[ODIN+ROM]
Good luck!
Thanks for the replies guys.
jje, i would disable it now but since it's bricked i dont think i can. Also i cant get into recovery mode. Im only getting into download mode because i bought myself a jig the last time this happened.
Nitro, i dont know what you mean by "ODIN included" ive been using odin to flash it.
What is Darky's by the way? Is it a custom ROM?
darkys is a custom rom... and Im pretty sure he meant he had attached odin for you.
Maybe try flashing JL2 with 512 and part checked..? does odin flash without an issue? and do you get any errors when trying to enter recovery?
Oh okay... well i was using odin 1.7 anyway
odin flashes without an issue and i cant get into recover because my phone is one of the unfortunate ones without 3BR.
I'll try flash it again as you said but if it doesnt work ill just go ahead and send it in to get fixed.
there are phones with no 3BR? I thought it was only 3 button download??? So odin flashed without any issues and you still cannot boot?
What firmware are you flashing?
Try JL2/KC1 maybe try a gb like JVO
usually the phones can't get into either.
i had to buy a jig to get into download mode.
ive tried KC1, JL2 and some others for android 2.1 and the same keeps happening. Odin flashes fine but the phone never boots
I'm just going to send it in to get fixed. I was just seeing if it was me doing something wrong or its just the phone and well it seems like its the phone.
Thanks for your help
if you can hit download mode you should be able to flash it, does adb work for you to get into recovery i think it's something like
adb reboot recovery.....not sure on that though, anyways, try flashing a new kernel, go to the dev section and flash hardcore speedmod then flash the rom again, at this point I dont think it matters so I would try using a 512 pit and tick repartition......just me though, i'd be trying everything before I sent it away
Similar to Masterslackers issue.
The phone was originally a stock Optus Éclair 2.1. About 6 months ago I decided to customize the i9000 with a custom Froyo 2.2.1 Rom (Doc's Rom Docs_XWJS3_Wipe-v9_1) from “The ROM Kitchen”. It worked really well and was much faster and responsive..
Yesterday, I decided to look at a move to Gingerbread and cook another ROM @ the ROM Kitchen, this time a Gingerbread 2.3.4 iteration.
The phone was rooted so I used Rom Manager to get into recovery mode where I could flash my new, Doc's JVR_No_Wipe-v8-00-08-22-10-09-4e6a8e4e86718.zip Rom.
All seemed to go well, but after the Flash, as the phone booted the first screen became filled with 100s of random coloured lines, then it transitioned to the normal Samsung start animation, but soundless.
After booting, I noticed that I no longer had a notification bar where battery, time, signal strength etc. was normally displayed atop the screen. I tried several different launchers to see if that was the issue, but to no avail. I tried to enable the notification bar using Go Launchers gesture setting (no go)
I tried rebooting the phone over and over, the notification bar would not return.
I was starting to lament my decision to flash when the following occurred.
I tried to re-enter recovery mode via ROM Manager to install a different ROM, but the phone bypassed it and then hung @ the Samsung I9000 logo screen. I then had to power the phone off before it would reboot into its UI. I could no longer reach recovery mode by any means.
Because I was getting nowhere and I had read that after flashing a new rom, root would often be lost, so I tried rerooting with "XXJVP-Complete-Rooting-Package" from
http://androidadvices.com/how-to-root-galaxy-s-on-android-2-3-4-xxjvp-firmware/ This also failed but it has also left me with a soft bricked phone.
The phone will not boot up or boot into recovery now, however It would still boot into (3 button) download mode.
I have tried various versions of Odin from v1.0 to v4.28 to ReFlash the phone back to life but with no success yet.
Using Odin, the phone hangs with no sign of progress and reports the following when left for 30minutes or so.
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
Anyone have any suggestions that might help to get the phone back.
Thanks, TeZ
So you didn't flash stock gingerbread before flashing custom rom? so you should first flash stock jvr and do hard reset after booting. Then you are safe to flash cwm capable kernel and custom rom.
For the odin problems, maybe you have kies running in background? Kill all kies processes and try again.
And I'd suggest reading all guides found in romkitchen thread..it saves lots of trouble. Hope that can fix your phone
Sent from my GT-I9000 using xda premium
Agree with above post, if you have Klies on your pc/laptop uninstall it, and re download the drivers, i have a good 2.3.4 tutorial and root 2.3.4 tutorial, both with Odin, let me know if interested. Also if you have heimdall installed then uninstall it also.
After you unistalled Kies (or at least stop it) and installed the drivers , pick a stock rom with bootloader from Ramad collection http://forum.xda-developers.com/showthread.php?t=1102881 .
I prefer Odin 1.82.
If you still unable to flash your phone, please follow steps from this guide to see how can debrick your phone.
http://forum.xda-developers.com/showthread.php?t=1134975
Good luck
Thanks for that, I did install kies after I bricked it, in the hope (probably missguided) that it would somehow help. Uninstalling
bigmadpete said:
Agree with above post, if you have Klies on your pc/laptop uninstall it, and re download the drivers, i have a good 2.3.4 tutorial and root 2.3.4 tutorial, both with Odin, let me know if interested. Also if you have heimdall installed then uninstall it also.
Click to expand...
Click to collapse
Thanks for your input, right now i need all the help I can get, hadn't heard of heimdall before. I guess its one more thing I could try if all else fails. But right now I'm going to try a few more conventional things with odin, like flash a stock rom etc.
DSGE said:
After you unistalled Kies (or at least stop it) and installed the drivers , pick a stock rom with bootloader from Ramad collection http://forum.xda-developers.com/showthread.php?t=1102881 .
I prefer Odin 1.82.
If you still unable to flash your phone, please follow steps from this guide to see how can debrick your phone.
http://forum.xda-developers.com/showthread.php?t=1134975
Good luck
Click to expand...
Click to collapse
Your post looks promising, I'm going to try this method out and see where it leads. I'll reply back with the outcome, many thanks
No problem. Try this option if you like http://www.theandroidsoul.com/xxjvp-android-2-3-4-firmware-galaxy-s-install-and-download/
And then this to root
http://www.theandroidsoul.com/root-xxjvp-firmware/
bigmadpete said:
No problem. Try this option if you like http://www.theandroidsoul.com/xxjvp-android-2-3-4-firmware-galaxy-s-install-and-download/
And then this to root
http://www.theandroidsoul.com/root-xxjvp-firmware/
Click to expand...
Click to collapse
Thanks for the info, running out of time today, will try for tomorrow
When moving from a froyo (2.2) rom to gingerbread, (2.3), you need the gingerbread bootloaders or you'll get all sorts of crap when turning on your phone (ie what you have).
Use odin to flash back to froyo, or flash a gingerbread firmware that comes with bootloaders. (I would recommend going back to froyo first to make sure everything is ok, since flashing bootloaders is a bit risky, as messing it up can permanently brick your phone)
cobrasixtysix said:
Thanks for your input, right now i need all the help I can get, hadn't heard of heimdall before. I guess its one more thing I could try if all else fails. But right now I'm going to try a few more conventional things with odin, like flash a stock rom etc.
Click to expand...
Click to collapse
DSGE said:
After you unistalled Kies (or at least stop it) and installed the drivers , pick a stock rom with bootloader from Ramad collection http://forum.xda-developers.com/showthread.php?t=1102881 .
I prefer Odin 1.82.
If you still unable to flash your phone, please follow steps from this guide to see how can debrick your phone.
http://forum.xda-developers.com/showthread.php?t=1134975
Good luck
Click to expand...
Click to collapse
Ok, here's where I'm at:
For the sake of simplicity I will detail what gave positive results rather than a tirade of what didn't.
Uninstalled Kies, rebooted
As instructed, went to:
http://forum.xda-developers.com/showthread.php?t=1102881
downloaded: Odin v1.82
downloaded: Gingerbread 2.3.3 (Australia and New Zealand)
XWJVN/XXJVQ/XSAJV5/Sbl (CSC: XSA): Download (150 MB) (Build date: Sun Jul 10 11:30:54 KST 2011)
Loaded up Odin and followed instructions.
Flash went ahead as normal and I now have a working phone again, thanks to you DSGE, I'm a very happy man
So I now have Gingerbread 2.3.3 installed and running.
My only issue's now is, that.
1. Half my apps dont work now or force close even after a reinstall.
2. Some apps won't install at all IE; my fav launcher; Go Launcher
3. I no longer have root access so Rom Manager and Titanium backup wont work.
4. My Backup Pro, works after I rewrote the correct path to the External Sd, but do I want to do that just yet? and just how much data should I reinstate so I don't corrupt the new system?
What should I do now?
Install busybox?
do a hard reset?
Flash a different Rom that will work for me?
Thanks so very much for all the good advise.
Cheers
First root the phone, then either a different rom, or format system and re install 2.3.3 or which ever u just installed, i think ure apps are not working due to the phone needing a wipe/reset and cache cleared from clockwork recovery
bigmadpete said:
First root the phone, then either a different rom, or format system and re install 2.3.3 or which ever u just installed, i think ure apps are not working due to the phone needing a wipe/reset and cache cleared from clockwork recovery
Click to expand...
Click to collapse
OK, latest update:
Everything is working fine including all my progs.
Like you say, I just need to root it now.
Can you point me to the correct files to root?
Thanks
http://www.addictivetips.com/mobile...t-samsung-galaxy-s-i9000-with-a-single-click/
or
http://androidadvices.com/how-to-root-samsung-galaxy-s-gt-i9000/
Read carefully friend
bigmadpete said:
http://www.addictivetips.com/mobile...t-samsung-galaxy-s-i9000-with-a-single-click/
or
http://androidadvices.com/how-to-root-samsung-galaxy-s-gt-i9000/
Read carefully friend
Click to expand...
Click to collapse
Seems to relate to 2.1 to 2.2.1 didn't see any mention of 2.3.3. I'm afraid I'll stuff the phone if I use the old root files.