Screen glued to front glass? - LG Optimus 2x

One of the things i loved by my (now sold) iphone 4, is that the screen is glued to the frontglass. This prevents dust from ever getting inn the screen. I really hate dust in the screen.
Do the optimus 2x glue the screen to the glass?? Anyone know.

I don't know about the O2X, but all the android phones I've had over the last few years have NEVER had dust under the screen/glass.

Same.
Never had dust under the screen on my Nexus but i did on my G1 (only because it was falling apart and i'd messed with the insides too much )
So far no dust or anything under the screen, but i did notice that the very small groove that runs around the edge between the phone and the silver band collects ALOT of dust which is kinda hard to get rid of.
Overall though, this phone has the best build quality of any i've ever owned!

Same over here, no dust.

I don't think you should be worried about this. The screens on newer devices are quite well sealed. No dust should be able to get in there. And yes, you will get dirt build up on the grooves along the outer edge but that's quite unavoidable and can be cleaned with a really small pin.

I have 1 small spec of dust in the lower left corner of my screen (only visible when light shines directly on the screen).
but this could be from manufacture
My HTC desire had a build up of dust down the left hand side of the screen due to a faulty seal around the glass

I had 2 with dust under screen. and by that I dont know if with time it gets more dust, or its just at assembly.

if the screen was glued wouldnt that be bad if the screen cracks?

carlos118 said:
if the screen was glued wouldnt that be bad if the screen cracks?
Click to expand...
Click to collapse
True, but thank god we have gurrilaglass!
Sent from my LG-P990 using XDA App

carlos118 said:
if the screen was glued wouldnt that be bad if the screen cracks?
Click to expand...
Click to collapse
The glue is easy to get rid of with some heat. So no problem if it cracks or you have to change a scratched one.

xmoo said:
thank god we have gurrilaglass!
Click to expand...
Click to collapse
Just have a look at my phone
LG Optimus 2X, gorilla glass: youtube.com/watch?v=bOZS36hq1s4

EasyWorld said:
Just have a look at my phone
LG Optimus 2X, gorilla glass: youtube.com/watch?v=bOZS36hq1s4
Click to expand...
Click to collapse
Gorilla glass doesn't mean it can't be breaked, but it won't break that easy.

xmoo said:
Gorilla glass doesn't mean it can't be breaked, but it won't break that easy.
Click to expand...
Click to collapse
The impact wasn't really hard at all and still... you can see the result. As far as I understand, gorilla glass means it won't SCRATCH (not break) that easy.

EasyWorld said:
The impact wasn't really hard at all and still... you can see the result. As far as I understand, gorilla glass means it won't SCRATCH (not break) that easy.
Click to expand...
Click to collapse
i got two scratches and I have no idea how i even got them :-(

Gorilla glass is just a hype. It scratches as easy as all other glasses.
I just wonder if it's GLUED to the screen or not. Not if it scratches.

Fenrisulven_ said:
I just wonder if it's GLUED to the screen or not.
Click to expand...
Click to collapse
It is glued. I went to the repair shop a couple of days ago to find out whether they could replace the broken glass on my phone. They highly recommended replacing the glass together with the display as one unit because, as they said, the glass is glued to the dislay and replacing just the glass is not only pretty difficult but can also result in dust getting between the glass and the display.

EasyWorld said:
It is glued. I went to the repair shop a couple of days ago to find out whether they could replace the broken glass on my phone. They highly recommended replacing the glass together with the display as one unit because, as they said, the glass is glued to the dislay and replacing just the glass is not only pretty difficult but can also result in dust getting between the glass and the display.
Click to expand...
Click to collapse
well.. i am thinking to change my screen because it has light leakage. " imported, so if to return it back it would cost me like 100$ at least plus whatever tax. so replace the screen from my own pocket is cheaper "
and i dont mind that BUT. where can i buy the screen with the front glass together ?
i dont want to buy the screen alone. does anyone have a good website where we can buy parts?

ll_l_x_l_ll said:
well.. i am thinking to change my screen because it has light leakage. " imported, so if to return it back it would cost me like 100$ at least plus whatever tax. so replace the screen from my own pocket is cheaper "
and i dont mind that BUT. where can i buy the screen with the front glass together ?
i dont want to buy the screen alone. does anyone have a good website where we can buy parts?
Click to expand...
Click to collapse
I you want to find a LCD without leakage you need to look forever. All LCD's has some kind of leakage.

Fenrisulven_ said:
I you want to find a LCD without leakage you need to look forever. All LCD's has some kind of leakage.
Click to expand...
Click to collapse
not true.
well.. it might be the case for the optimus 2x but not all phones lol.

ll_l_x_l_ll said:
not true.
well.. it might be the case for the optimus 2x but not all phones lol.
Click to expand...
Click to collapse
Yes all. Even the mighty iphone ;-) and just google ipad 2 light bleed. Lol
Sent from my LG-P990 using Tapatalk

Related

[Q] So I got a scratch on my screen ... what now?

Hi there.
As the title reads I got a 3mm long scratch on the display of my galaxy ... the scratch distorts the colours, so it's quite annoying once you notice it (and it's particularly annoying on brighter backgrounds) ... I have absolutely no idea how it happened, as I am using a bag for it all the while it's in my pocket to prevent it from getting scratches...
Soo, my question:
Is there anything I can do to "fix" the scratch?
Once scratch happens, then it pretty much stays there.
Sometime a screen protectors can help hide the scratches make it less noticeable. Other than that there are no way to fix it I suppose.
Good screen protector hide all scratches.
Sent from my GT-I9000 using Tapatalk
Please don't try this at home!
If the scratch isn't too deep then you may be able to polish it out with some wet/dry sandpaper.
But you may damage the touch screen if you go too deep.
Sent from my AWESOME Galaxy S
For ****s sake DO NOT take sand paper to the touch screen!! what kind of advice is that?
once scratched, that's it. if it really annoys you, you'll have to replace the screen.
Wet/dry sandpaper is how a clear coat is polished on a car. As I said if it isn't too deep then it's an option. What you are saying is that you are screwed anyway and have to replace it. If the OP is already at that point of frustration, then they could at least try before having to replace the screen.
Last resort before accepting your screen is stuffed?
At first I also thought what a silly idea to use sand paper on glass.
But after googling the web and quick research, it can be done!
Using high grit silicon carbide wet/dry sanding paper can remove scratches from glass.
Though, I wouldn't try it my self but thanks for the pointer.
here are an example of what can be done:
http://www.ehow.com/how_4472970_remove-small-scratches-from-window.html
spenceee said:
Wet/dry sandpaper is how a clear coat is polished on a car. As I said if it isn't too deep then it's an option. What you are saying is that you are screwed anyway and have to replace it. If the OP is already at that point of frustration, then they could at least try before having to replace the screen.
Last resort before accepting your screen is stuffed?
Click to expand...
Click to collapse
Screen protector I would recommend to hide the scratches is the Zagg invisible shield.
It is made of polymer that kinda adhere to the screen very tightly help smooth over scratches and make them less noticeable compare to other brand.
BIG BIG DISCLAIMER:
Zagg invisible shield is NOT for everyone. The polymer material can feel sticky and a bit soft. So be warned, it is a love hate relationship when it comes to zagg.
Well i got 2 scratches one is 5mm long the other is 8mm. Fortunately they are on the far right side, close to the bezel, so they don't really bother me at all.
You got only one small scratch, that's nothing
Even that i had the first scratches on the second day i owned the device i will still not make it look ugly with some silly shield. Im expecting a year out of this device, and don't care if it's scratched when that year is gone.
If you change your mobile phone every year then I can understand.
However, my mobile phone lasted me at least 2-3 years each. My previous two was XDA O2 > Samsung Omnia i900 and now Galaxy S
buddy01 said:
Well i got 2 scratches one is 5mm long the other is 8mm. Fortunately they are on the far right side, close to the bezel, so they don't really bother me at all.
You got only one small scratch, that's nothing
Even that i had the first scratches on the second day i owned the device i will still not make it look ugly with some silly shield. Im expecting a year out of this device, and don't care if it's scratched when that year is gone.
Click to expand...
Click to collapse
I noticed that the (super) AMOLED displays are relatively cheap in comparison to the traditional LCD screens that you can find on for example the HTC's. Here in the Netherlands I found a company that will repair/substitute a Galaxy S screen for 100 euro. (Compared to 250 euro for a HD2 screen) And I didn't search that hard. I bet that there are companies that do it for less.
If other solutions doesn't work for you, google the internet and look what the prices are for a new display in your neighbourhood. Maybe its much cheaper than you thought.
That's beyound any logic.
OLED/AMOLED screens are more expensive than LCD screens, 250$ for the HD2 screen is an overly blown-out price, you can find screens on ebay for less than half that price.
About sandpaper and whatnot- Yeah, high-grit sandpaper is a way to polish out scratches on glass.
I won't ever try it on the SGS, since i don't know where exactly is the digitizer layer.
You won't really need to replace the OLED screen, its the capacitive touch screen layer that needed to be change.
For my omnia i900, I have plenty of scratches on my screen and I replaced the touch layer at one of the local store for less than 40USD.
kcharng said:
You won't really need to replace the OLED screen, its the capacitive touch screen layer that needed to be change.
For my omnia i900, I have plenty of scratches on my screen and I replaced the touch layer at one of the local store for less than 40USD.
Click to expand...
Click to collapse
aren't the touchsensors build in the screen itself? If I remember it well is the biggest advantage of super Amoled that it doesn't have a touch screen layer.
appelflap said:
aren't the touchsensors build in the screen itself? If I remember it well is the biggest advantage of super Amoled that it doesn't have a touch screen layer.
Click to expand...
Click to collapse
Indeed that is the case. The SAMOLED screens have the touch technology integrated into the screen so you will have to replace the entire screen.
But someone found 100euros for a replacement in Holland... can you post a link to that? Seems like a good backup to me.
If its not insured, then get it insured and claim the repairs of the insurance. Accidental damage should cover it.
outch, didn't know. best keep it scratch-less then.
Darkstriker said:
Indeed that is the case. The SAMOLED screens have the touch technology integrated into the screen so you will have to replace the entire screen.
But someone found 100euros for a replacement in Holland... can you post a link to that? Seems like a good backup to me.
Click to expand...
Click to collapse
From eHow:
Use Coca Cola to remove small scratches. Apply a small amount to a soft cloth and rub the scratches. Re-apply until the scratches are gone. The citric acid and carbonation in the soda help clean and remove small scratches in some items.
Read more: How to Remove Small Scratches From Window Panes | eHow.com http://www.ehow.com/how_4472970_remove-small-scratches-from-window.html#ixzz0uhmjVFLT
Click to expand...
Click to collapse
Arkymedes said:
From eHow:
Click to expand...
Click to collapse
LoL is that for real?
Sent from my GT-I9000 using XDA App
ogen said:
LoL is that for real?
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
LoL I guess it is... the link is there and I just read about it.
I think is the cheapest way to try to fix small scratches.. I think I will try on some old phones around the house LOL

[Q] Cracked Screen

Hi guys,
So my mum dropped the Optimus Black that I bought her and it has cracked on the front - can someone on here please tell me how I would check whether it is only the front glass screen that needs replaced or the actual entire LCD? I'm very n00bish when it comes to this stuff.
Thanks all
Ok, I'm pretttty sure it's only the outer glass screen that's shattered and the actual LCD is fine.
Ordered a replacement part online, will update you all on how difficult it is to replace .
can you tell me where you ordered it ? I'm looking that too
Damn that sucks
Sent from my PG06100 using XDA Premium App
if the screen is still running, I am pretty sure it is just the upper layer of the LCD screen.
Ilko said:
can you tell me where you ordered it ? I'm looking that too
Click to expand...
Click to collapse
There's pretty much offers on eBay.
yeah but, china products...
Try dhgate
Boubt u can buy only 1
Isn't the screen gorilla glass? Does it crack so easily?
Sent from my LG-P970 using XDA App
Cracked screen
Hello guys
Well my sister just got an P970 and it cracked..I dont know why bcoz I had that phone for couple of months and its not too heavy and it fell and never broke...but anyways
the digitizer (front glass) screen cracked..and I ordered ny from china..and I dissasembled the phone but up to a limit..I cannot dissasemble the LCD screen from the digitizer screen..no way..it seems to be glued or sumtin..
Does ANYONE know how? I have searched the web but there is NO info
yuggoboy said:
Hello guys
Well my sister just got an P970 and it cracked..I dont know why bcoz I had that phone for couple of months and its not too heavy and it fell and never broke...but anyways
the digitizer (front glass) screen cracked..and I ordered ny from china..and I dissasembled the phone but up to a limit..I cannot dissasemble the LCD screen from the digitizer screen..no way..it seems to be glued or sumtin..
Does ANYONE know how? I have searched the web but there is NO info
Click to expand...
Click to collapse
I changed the digitizer of my previous phone, the Galaxy Spica, and the digitizer was glued to the outer rim of the LCD so i had to use force to get them apart.
Br,
zaitz
My friend's p990 also had a scratch on his screen
seems this gorrilla is just a chimp
Pretty sure it's not "titanium glass", just hardened glass, so don't expect it to be invulnerable. Get a screen protector, don't put your phone in with keys, coins, or anything else with sharp edges, and don't drop your phone this should keep it nice and shiny for a long time.
I once cracked my screen of Desire HD... Before buying anything, be 100% sure whether the top glass is mounted onto the LCD below; or glued to it with some sort of special chemical.
When I broke my DHD screen; I bought only the upper glass part from Ebay. But turned it, the top glass part was glued to the LCD. So I had to buy the LCD and glass part together...
masterthor said:
Pretty sure it's not "titanium glass", just hardened glass, so don't expect it to be invulnerable. Get a screen protector, don't put your phone in with keys, coins, or anything else with sharp edges, and don't drop your phone this should keep it nice and shiny for a long time.
Click to expand...
Click to collapse
but the "advertisement" on u-thub says differently
does anyone has a how to for dissasembling the phone?
the screen is scratch resistant. personally tried and tested using a sharp knife. i still use a screen protector, though, because we can never tell! i guess gorilla glass is still glass. it's just scratch and impact resistant, as seen on youtube.
This happened to me too the other day. The phone slipped out of my hand and onto a rather soft vinyl floor. Screen is now cracked all over, but working.
As it seems no-one here has been able to replace the screen themselves with ebay replacement glass (probably plastic anyway), I'll just throw my OB in the trash, and gladly so, because of LG's broken promises to update the phone. Thinking back, I might even have had a smirk on my face when I realized what had happened. At least now I have an excuse to get the Galaxy Nexus or some other phone from a decent, self-respecting company, and finally be at peace with the phone I own. With the OB I could feel a bit of frustration every time I used it. Frustration (or pity really) is something I also felt when I checked this forum, since the mods kept closing all the GB-related threads for no apparent reason other than to demonstrate their power.
Without LG, life will indeed be good
"the screen is scratch resistant" - well i made a scratch by simply cleaning the screen with some textil made for cleaning glasses
Noblim said:
Isn't the screen gorilla glass? Does it crack so easily?
Sent from my LG-P970 using XDA App
Click to expand...
Click to collapse
P970 screen is Gorilla Glass. But I'm not sure about the replacement one from eBay.

[Q] Cracked glass - super glue and zagg screen protector

OK so first off I know I'm a cheap sod :angel:
My SG Nexus got wet and I'm waiting for the LG N4 to become in stock again...
So I've got myself a SG Note off eBay in perfect working order apart from one long crack that runs though only the glass (the OLED is fine).
I've looked into replacing the glass and tbh even thought I'm an engineer, nope.
My cunning plan is to fill the crack with superglue (let it dry) then slap on a zagg screen protector on it.
Any comments or ideas? Maybe lose the super glue? Maybe use something else other than superglue?
All ideas welcome - photos to follow when it gets here.
Just lose the super glue. The screen protector is enough. I would recommend the SGP screen protector maybe even the glass one.
Sent from my GT-N7000 using xda premium
kishd said:
Just lose the super glue. The screen protector is enough. I would recommend the SGP screen protector maybe even the glass one.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Thanks, I have a long history with Zagg and all ready got one on order. Bit worried about the crack edge creating a refractive boundary hence the super glue... maybe I'll do a run with out the screen protector... maybe I'll stop over-thinking it
ben83s said:
Thanks, I have a long history with Zagg and all ready got one on order. Bit worried about the crack edge creating a refractive boundary hence the super glue... maybe I'll do a run with out the screen protector... maybe I'll stop over-thinking it
Click to expand...
Click to collapse
I'd skip the superglue since it's vapours will possibly stain the digitizer... In other words, it will make a mess!
Rayan said:
I'd skip the superglue since it's vapours will possibly stain the digitizer... In other words, it will make a mess!
Click to expand...
Click to collapse
Now that is something I had over looked. I had thought the glue would chemically react with anything. Have a digital cookie mate
Also if the glue sat proud when dry even a tiny bit the screen protector wont follow the contour & will have that nasty "lifting" look to it along the crack that you get at edges of screens some times.
I would fit a glass even if its involved, the part is about £15 & if you continue to use the phone cracked you risk pressure on your LCD & that's not cheap.
Pat. said:
Also if the glue sat proud when dry even a tiny bit the screen protector wont follow the contour & will have that nasty "lifting" look to it along the crack that you get at edges of screens some times.
I would fit a glass even if its involved, the part is about £15 & if you continue to use the phone cracked you risk pressure on your LCD & that's not cheap.
Click to expand...
Click to collapse
Thanks, but installing the glass involves separating the glass and OLED and there glued together. You have to heat the glass with a heat gun then pull them apart. I'm thinking that's going to crack the OLED.
http://forum.xda-developers.com/showthread.php?t=1487716
That thread is a bit scary isn't it, its one of those jobs where having seen one done & exactly what's involved drastically increases the chances of success but most people haven't got that luxury.
But, if i wanted the phone repaired i would see risking the cheap way first as a worthwhile gamble.
But hope your screen "protector over crack" method works for you.
seems legit.
also, please send us step by step pics.
ben83s said:
Bit worried about the crack edge creating a refractive boundary hence the super glue...
Click to expand...
Click to collapse
Use oil mixture in the crack??
http://gr5.org/index_of_refraction/
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
What about the car windsheild repair kits ? The ones that Auto-Glass (UK) use to fill cracks and chips on car windsheilds ? It leaves no residue either, Its basically like liquid glass until it sets.
worth looking it to surely ? would be cheaper than a whole Screen replacement.
PaulF8080 said:
Use oil mixture in the crack??
http://gr5.org/index_of_refraction/
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
Dam good link. I like the idea of one of those oil. Maybe baby oil would be to viscose (runny) so I'm thinking that a drop of two of that corn sirpe could do the trick... maybe even some wax? I got some clear natural beaswax... I feel some experimentation coming on....
azzledazzle said:
What about the car windsheild repair kits ? The ones that Auto-Glass (UK) use to fill cracks and chips on car windsheilds ? It leaves no residue either, Its basically like liquid glass until it sets.
worth looking it to surely ? would be cheaper than a whole Screen replacement.
Click to expand...
Click to collapse
again good shout. My only heastitaion is thats a one way street, no going back. But I think if the screen protector doesn't work then that can be dam good plan B!

First time phone meets floor and cracked.

Hey guys.
Yesterday my phone fell and the screen cracked.
Gorilla glass 3 doesn't seem to protect the phone...
Everything is working fine now but the screen is just cracked...
OrenGazala said:
Hey guys.
Yesterday my phone fell and the screen cracked.
Gorilla glass 3 doesn't seem to protect the phone...
Everything is working fine now but the screen is just cracked...
Click to expand...
Click to collapse
Sorry to hear that, hope you have insurance.
Sent from my XT1095 using Tapatalk
AGISCI said:
Sorry to hear that, hope you have insurance.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
No I don't have insurance.
Bought this phone on eBay..
I have to pay about 150$ to repair the phone...
OrenGazala said:
Hey guys.
Yesterday my phone fell and the screen cracked.
Gorilla glass 3 doesn't seem to protect the phone...
Everything is working fine now but the screen is just cracked...
Click to expand...
Click to collapse
Consider yourself lucky man, with the s**t digitisers we had on the nexus 4 any crack in the glass above the screen would result in an unusable touch panel. I understand that cracked glass is never a good thing but at least you can still use the device!
I don't want to sound like a d**k but the purpose of Gorilla Glass 3 is scratch protection, not drop protection. Moto just released a shatterproof phone for that if I'm not wrong.
Hard glass on unprotected edges is always gonna break.
Flipz77 said:
Consider yourself lucky man, with the s**t digitisers we had on the nexus 4 any crack in the glass above the screen would result in an unusable touch panel. I understand that cracked glass is never a good thing but at least you can still use the device!
I don't want to sound like a d**k but the purpose of Gorilla Glass 3 is scratch protection, not drop protection. Moto just released a shatterproof phone for that if I'm not wrong.
Hard glass on unprotected edges is always gonna break.
Click to expand...
Click to collapse
Yea...
Well I can still use the device but I will replace all the front side:
Right now I have white front but the lab I send the phone has only black.
He will also replace the screen digitizers in case they got damaged.
I ordered a flip case from eBay, hoping that could save the screen (It sure could minimize the damage).
OrenGazala said:
Yea...
Well I can still use the device but I will replace all the front side:
Right now I have white front but the lab I send the phone has only black.
He will also replace the screen digitizers in case they got damaged.
I ordered a flip case from eBay, hoping that could save the screen (It sure could minimize the damage).
Click to expand...
Click to collapse
+1 on the flip case. Just make sure it's got a tpu shell around the phone, otherwise you won't want a drop while the case is open!
(Don't be disappointed about the black front, it looks schweeeet with our amoled )
Flipz77 said:
+1 on the flip case. Just make sure it's got a tpu shell around the phone, otherwise you won't want a drop while the case is open!
(Don't be disappointed about the black front, it looks schweeeet with our amoled )
Click to expand...
Click to collapse
Yeah lol.
Thanks man!
I'll update you when phne get fixed.
Flipz77 said:
+1 on the flip case. Just make sure it's got a tpu shell around the phone, otherwise you won't want a drop while the case is open!
(Don't be disappointed about the black front, it looks schweeeet with our amoled )
Click to expand...
Click to collapse
Well phone got fixed.
I don't like the black at all but that's what I have right now so I need to get used to it.
I hope I will be able to get along with the phone for one more year and then probably I'll replace it.
Right now he works really good.
It took the engineer to replace the broken screen with a new one about one hour and he always mumbled bad things about Motorola and how they build their phones.
He tried to put the back bamboo case to it's place and failed many times because the glue just won't work..
He told me to wait some time so the glue would get sticky to the phone itself.
Next time, I will buy a phone that have wider support in my country, make sure I have a flip case from the very beginning and make sure that you can unplug the battery from the phone.
That phone is awesome but has a quite long list of disadvantages...
OrenGazala said:
Well phone got fixed.
I don't like the black at all but that's what I have right now so I need to get used to it.
I hope I will be able to get along with the phone for one more year and then probably I'll replace it.
Right now he works really good.
It took the engineer to replace the broken screen with a new one about one hour and he always mumbled bad things about Motorola and how they build their phones.
He tried to put the back bamboo case to it's place and failed many times because the glue just won't work..
He told me to wait some time so the glue would get sticky to the phone itself.
Next time, I will buy a phone that have wider support in my country, make sure I have a flip case from the very beginning and make sure that you can unplug the battery from the phone.
That phone is awesome but has a quite long list of disadvantages...
Click to expand...
Click to collapse
Awesome that you could already have it serviced!
I see your point though, and I understand that in this thriving "free" market we can only choose the best compromise for our needs. I wouldn't buy a LG just for the removable battery and the repair support, but I can totally see why it looks like a viable choice for you right now.
As much as I like this phone, glue never looks like a good solution for pieces that are gonna be serviced sooner or later... As for the screen assembly, well, I guess every manufacturer now makes the digitiser and glass into one single part.
That being said, enjoy your moto and keep it for a while

Cracked Glass nexus 6

I have a issue, my glass is cracked middle ways of the screen just 1 crack that runs all the way across. The digitizer is not hurt, I have a new glass only kit. It came with just the glass and some UV glue. I don't have insurance on my phone and even if I did it would still cost me 175 to get another device. I think the insurance is pointless because it costs about the same I think if you send it directly to Motorola. The digitizer and glass on eBay is around 175 but it comes with the glass/frame/digitizer. I know that its very hard to change just the screen from what iv been reading. What would you guys recommend I do? I'm trying to avoid spending a lot of money. But if I have to I will. I would like to change just the glass because I ordered that thinking that I could just do it myself, then I got to researching...I have changed the back battery cover and bezzle from midnight blue to cloud white, so I'm familiar with taking it apart. Any advice would be helpful. Thanks!!
Sent from my Nexus 6 using Tapatalk
Just the glass?
You mean the digitizer?
Does it have the AMOLED? Or is it literally just the digitizer?
If it is just the digitizer without the amoled, then you're screwed. It is *impossible* to split the amoled from the digitizer without destroying the amoled.
If it is the digitizer PLUS the amoled, then you can go ahead and smash SMASH SMASH!!!
The amoled+digitizer is glued onto the plastic frame, so you'll want something like a razor blade to carefully break the connection between them without damaging the plastic frame. Once they're separated, you clean up the surface, and just glue them back together.
The metal cover that you see over the existing amoled on the back of the screen+frame unit just pops off.
doitright said:
Just the glass?
You mean the digitizer?
Does it have the AMOLED? Or is it literally just the digitizer?
If it is just the digitizer without the amoled, then you're screwed. It is *impossible* to split the amoled from the digitizer without destroying the amoled.
If it is the digitizer PLUS the amoled, then you can go ahead and smash SMASH SMASH!!!
The amoled+digitizer is glued onto the plastic frame, so you'll want something like a razor blade to carefully break the connection between them without damaging the plastic frame. Once they're separated, you clean up the surface, and just glue them back together.
The metal cover that you see over the existing amoled on the back of the screen+frame unit just pops off.
Click to expand...
Click to collapse
No its the glass only..
Sent from my Nexus 6 using Tapatalk
The digitizer isn't hurt at all the glass is just cracked. I have a new glass with the glue that goes in between the glass and digitizer. Will I need any adhesive for the mid frame?
Sent from my Nexus 6 using Tapatalk
I'm about to attempt to do this myself but I'm afraid that I'll screw something up..
Sent from my Nexus 6 using Tapatalk
Its the amolded corning gorilla glass
Sent from my Nexus 6 using Tapatalk
Hope it works out. Had the same problem with my S4 a few years ago. I had my buddy do it for me. Was a lot of work but worth it. Maybe there is a tutorial on YT?
I was in the same boat. I decided to have it professionally fixed. I usually fix all my phones, but the price of the glass with everything attached was just as expensive as having a professional fix it. with a warranty.
The part i found was on average between 150 and 180. it only cost me 200 to get the phone fixed by someone.
What ever you choose good luck.
qnc said:
I was in the same boat. I decided to have it professionally fixed. I usually fix all my phones, but the price of the glass with everything attached was just as expensive as having a professional fix it. with a warranty.
The part i found was on average between 150 and 180. it only cost me 200 to get the phone fixed by someone.
What ever you choose good luck.
Click to expand...
Click to collapse
I only have 185 in my phone,lol that's what sucks..I'm trying to avoid spending a lot of money...but I might have to spend more than I want. If I can do it myself then I will try. I really don't have anything to lose.
Sent from my Nexus 6 using Tapatalk
Benzema9 said:
Hope it works out. Had the same problem with my S4 a few years ago. I had my buddy do it for me. Was a lot of work but worth it. Maybe there is a tutorial on YT?
Click to expand...
Click to collapse
Thanks brother
Sent from my Nexus 6 using Tapatalk
It's not easy but it can be done. The LCD is very fragile and it takes a lot of time and patience to remove the old glue. I have a screen separator machine that heats up the glass and makes it easier to separate but it is still a lot of work and very easy to destroy the LCD. I've heard of people doing it with a heat gun but that is risky because you can't regulate the temp and can kill the LCD. Make sure to invest in some plastic razors if you attempt it. Also you will need a UV light to cure the glue as it will only harden under UV.
Benzema9 said:
Hope it works out. Had the same problem with my S4 a few years ago. I had my buddy do it for me. Was a lot of work but worth it. Maybe there is a tutorial on YT?
Click to expand...
Click to collapse
There is 1 good tutorial but there is no speaking in the video, just some lame ass music. The guy in the video also uses a hot plate a thin piece of some kinda wire. There needs to be a better video on how to replace just the glass screen on a nexus 6, a detailed video with speaking..
Sent from my Nexus 6 using Tapatalk
doitright said:
Just the glass?
You mean the digitizer?
Does it have the AMOLED? Or is it literally just the digitizer?
If it is just the digitizer without the amoled, then you're screwed. It is *impossible* to split the amoled from the digitizer without destroying the amoled.
If it is the digitizer PLUS the amoled, then you can go ahead and smash SMASH SMASH!!!
The amoled+digitizer is glued onto the plastic frame, so you'll want something like a razor blade to carefully break the connection between them without damaging the plastic frame. Once they're separated, you clean up the surface, and just glue them back together.
The metal cover that you see over the existing amoled on the back of the screen+frame unit just pops off.
Click to expand...
Click to collapse
Have you ever changed just a broken glass screen on a nexus 6?
Sent from my Nexus 6 using Tapatalk
travmed said:
It's not easy but it can be done. The LCD is very fragile and it takes a lot of time and patience to remove the old glue. I have a screen separator machine that heats up the glass and makes it easier to separate but it is still a lot of work and very easy to destroy the LCD. I've heard of people doing it with a heat gun but that is risky because you can't regulate the temp and can kill the LCD. Make sure to invest in some plastic razors if you attempt it. Also you will need a UV light to cure the glue as it will only harden under UV.
Click to expand...
Click to collapse
Thank you, for you're advice brother! I took my device apart awhile ago all the way down to the mother board. I came to realize that I'm just gonna have to wait and hope I can scrape up some money and hopefully get lucky and find someone that has a used nexus 6 for cheap if I'm gonna spend 150 to 175 bucks on just a LCD frame assembly, hell I might as well just buy another nexus 6. And if i let Motorola replace my phone its still gonna be 175 bucks and all of them will probably be refurbs! I have 185$ in this one. I bought it off swappa haven't even had this damn thing a month yet lol. When I bought the phone it still had a warranty on it, the warranty ran out about a week before I broke it lol. Jus my luck.
P.S. I would gladly accept donations J/K..
Sent from my Nexus 6 using Tapatalk
travmed said:
It's not easy but it can be done. The LCD is very fragile and it takes a lot of time and patience to remove the old glue. I have a screen separator machine that heats up the glass and makes it easier to separate but it is still a lot of work and very easy to destroy the LCD. I've heard of people doing it with a heat gun but that is risky because you can't regulate the temp and can kill the LCD. Make sure to invest in some plastic razors if you attempt it. Also you will need a UV light to cure the glue as it will only harden under UV.
Click to expand...
Click to collapse
Nexus 6 does not have an LCD. It has an AMOLED.
AMOLED is less than 1mm thick. It CANNOT be removed from the glass digitizer without destroying it.
doitright said:
Nexus 6 does not have an LCD. It has an AMOLED.
AMOLED is less than 1mm thick. It CANNOT be removed from the glass digitizer without destroying it.
Click to expand...
Click to collapse
I watched a video on youtube, of a guy that actually done it without destroying the digitizer.
Sent from my Nexus 6 using Tapatalk
doitright said:
Nexus 6 does not have an LCD. It has an AMOLED.
AMOLED is less than 1mm thick. It CANNOT be removed from the glass digitizer without destroying it.
Click to expand...
Click to collapse
I'm not saying that its easy, and I'm not saying that it can't be done successfully either. But I do know this on a scale of 1 being the easiest and 10 being almost impossible. I would rank it a 9.7. So I'm going to just go and buy the digitizer + glass + frame and do it my self.
Sent from my Nexus 6 using Tapatalk
mwebb34 said:
I'm not saying that its easy, and I'm not saying that it can't be done successfully either. But I do know this on a scale of 1 being the easiest and 10 being almost impossible. I would rank it a 9.7. So I'm going to just go and buy the digitizer + glass + frame and do it my self.
Click to expand...
Click to collapse
It might be possible, IF the whole thing wasn't glued down to the frame, which it is.
doitright said:
It might be possible, IF the whole thing wasn't glued down to the frame, which it is.
Click to expand...
Click to collapse
The video I watched doesn't have any speaking in it its just has some lame music in the background. I will tryn link it to you so you can watch it.
Sent from my Nexus 6 using Tapatalk
I tried exactly the same you were about to do but ended up destroying the LCD when I tried separating the LCD from the plastic frame. I had no choice but bought the LCD (with the glass already glued) but still it wasn't easy to attach the LCD back to the bent frame.
Obviously you know what to do because you have disassembled the N6 before, but be careful when you separate the LCD-broken glass from the frame. There just isn't much leverage.

Categories

Resources