Related
Firstly...I'm with 3 in Australia
Ok, bought a TYTN II off ebay some months ago now from a Hong Kong dealer (that'll learn me) and it seems to not work with the 3G network here in Australia. The phone is always EDGE roaming and whenever it switches to 3G I can't send or receive SMS messages.
I've done some reading around and found that maybe I need to flash the ROM of the phone to an Australian one so that the phone will work properly. I found a thread on Whirlpool and someone there posted a link to this ROM for another user:
www.mediafire.com/?0jt1cwyx61g
Is that the ROM I want? If so, how do I go about flashing my phone with this ROM to make it work?
Can anyone help me??
You're more than likely having issues with the radio that came with the phone. Go to the ROM development forum, read how to unlock, install HardSPL, etc.. and then choose either one of the ROMs that come with a new radio available: NATF, Hyperdragon, Dutty's, etc... or look at one of the threads that show how to install a new radio. I'm not going to make any ROM recommendations, because it's really a matter of personal taste and how the ROM feels to you. For me personally, I've settled on T.i.R vk8 WWE build 19971. And I have radio version 1.58.25.17.
Hey dude,
congrats on the kick-ass new phone.
To help you with your prob, you'll have to signup and login to HTC E-Club for Australia, then download and flash the latest 3 ROM. Its the only way to ensure you have the correct inbuilt three network settings, there was a cab floating around a while back but it didn't include planet3 connectivity - only mobile internet.
look for this one :
HTC TyTN II WM6.1 ROM code for Hutchison ‘3’ Network customers
ROM version: 3.29.861.0
ROM date: 05/15/08
Radio version: 1.65.16.25
Protocol version: 25.83.40.02H
Date: 2008-06-02 Category: ROM Upgrade
I found the ROM development page and the list of radios that relate to the specific ROM's match the ones I already have (note: I already flashed my phone using the one in the link I provided in my first post).
I went and registered for HTC E-Club and went to download the WM6.1 ROM u mentioned Sanchez and when I entered the Serial Number it says the ROM is unsuitable for my phone. Is this because it is NOT an Australian phone?
Would this ROM actually work on my phone and would I be able to get a copy of it from somewhere else?
yeah, its not the actual ROM so much as the stuff Three bundle within that you need.
I'm aka Dr.Nerdlinger on whirlpool, a guy I recommended this to didn't have any problems, seemed to make his US Tilt into an Aussie Three TyTnII.. Havent tried it myself as Im already three branded.
http://www.andrewjstevens.com/2008/06/a-new-att-tytn-ii-tilt-by-htc/
from : whirlpool thread
How did you go Morphio, did that link help out any ?
Umm nah, I've also tried a much newer 3.29.861.0 ROM and that didnt help.
I dont know what to do
Morphio said:
Umm nah, I've also tried a much newer 3.29.861.0 ROM and that didnt help.
I dont know what to do
Click to expand...
Click to collapse
I have the latst official shipped TyTnII 3 ROM (WM 6.1) for Australia.
ie:
TyTN II_AUS Hutch_WM6.1_Upgrade_20080602 (may 2008)
Can't recall where I found it. I am fairly certain it was on this site
If you cannot find it through searchLet me know if you still need it.
Official 3 ROM
Morphio said:
Firstly...I'm with 3 in Australia
Ok, bought a TYTN II off ebay some months ago now from a Hong Kong dealer (that'll learn me) and it seems to not work with the 3G network here in Australia. The phone is always EDGE roaming and whenever it switches to 3G I can't send or receive SMS messages.
I've done some reading around and found that maybe I need to flash the ROM of the phone to an Australian one so that the phone will work properly. I found a thread on Whirlpool and someone there posted a link to this ROM for another user:
www.mediafire.com/?0jt1cwyx61g
Is that the ROM I want? If so, how do I go about flashing my phone with this ROM to make it work?
Click to expand...
Click to collapse
Dude... found it in seconds on google
Link to the ROM download
http://www.megaupload.com/?d=7J3L5LEE
I have flashed this ROM anytime I've had problems with others and it has always worked.
One question though, did Juvs Network Wizard not find 3 for you or it failed in some other way?
Congrats on your purchase and hope get as much out of it as I have
MaDing2000 said:
I have the latst official shipped TyTnII 3 ROM (WM 6.1) for Australia.
ie:
TyTN II_AUS Hutch_WM6.1_Upgrade_20080602 (may 2008)
Can't recall where I found it. I am fairly certain it was on this site
If you cannot find it through searchLet me know if you still need it.
Click to expand...
Click to collapse
This is the same one I used (3.29.861.0) and nothing seems to have changed, still doesnt register on 3G network
Morphio said:
This is the same one I used (3.29.861.0) and nothing seems to have changed, still doesnt register on 3G network
Click to expand...
Click to collapse
Damn! Sorry...
The ROM I posted the link to doesn't ask me for a "serial" when I've flashed it..
I assume you have run the Connection Setup wizard (Settings > Connections > Connection Setup?
Have you tried to manually enter 3's settings?
Perhaps flash the latest Hyperdragon III http://forum.xda-developers.com/showthread.php?t=397121
It has a suitable radio for Australia and I flashed this recently on a TyTn II purchased in Malaysia and all worked fine (as did the ROM I referred to earlier)
Ok but to flash to that (being a cooked ROM) dont I have to do something before I can flash to that? Is it HardSPL I have to install or something like that?
Yes... Unlock and flash a hard spl...
It is quite easy
Excellent directions here:
http://forum.xda-developers.com/showthread.php?t=356895
I am in no way an expert with these devices but I have had no problem that hasn't been quickly resolved.
perhaps unlocking the phone may resolve your problem with flashing the 3 shipped ROM.... (again, no expert here)
Ok seems this is not gonna work. I've done some reading and apparently the board it to blame for my phone not working properly. Since it was an eBay job (but from a company) I can still get warranty but I have to send overseas to HK.
What do people think, I can buy a new TytnII for $659 and when the old one comes back from warranty I can sell it. Would the new one (if I bought from Australian store) work on 3G?
Unless it's faulty hardware, it shouldn't need a return. Don't spend your cash just yet
Try this new official 3.34.721.2 WWE HTC rom, with 1.70 radio.
Download it, plug your activesync cable in, run the exe file you downloaded - after 20 mins or so, you should have the latest ROM, with built in Aus Three Network detection (assuming you have a legal 3 sim-card)
(ps. it may seem like its stalled while flashing, but just give it time)
Report back if successful
Downloaded and installed last night - doesnt seem to have made any difference
sigh...
Morphio said:
Downloaded and installed last night - doesnt seem to have made any difference
sigh...
Click to expand...
Click to collapse
After Flashing a ROM you should always hard reset the device as well. After all this is done, what versions of the following are showing as being installed: ROM, Radio, SPL (can find the last one in the tri colour boot screen - read the wiki if you need to know how to get to the boot screen)? If all of this is showing correctly and you're still having problems then it's probably something like the sim (just any old sim won't do and it needs to be compatible with the phone). You could try another if you have a spare. When you switched it on, after a minute or so did you get a message popping up asking if you wanted to automatically configure the phone for your networks settings?
Hi
Basically i just tried to download the latest ROM from HTC support and it wouldn't let me, kept saying "not suitable for your handset" after i put in my serial number. Basically e-mailed the support and they say that because my handset is orange branded, that I cannot download it from them. I have recently found another way to download the ROM, but in the email it said that orange may have made har or software changes to the phone. Will this mean that the ROM will not work? Have not yet tried for fear of bricking my phone!!!
Thanks
will most likely Brick it.
its the SPL that controls what ROMs you can flash.
That sucks.... my phone hasnt been updated yet, and is still pretty slow!
Cheers for the reply!
you can always flash a Hard SPL (i believe 1.37 is the preferred one).
you can flash back to the original ROM and SPL for warrenty reasons... i'd suggest making a note of the existing SPL version (can be found in Bootloader - Soft reset and Vol Down button).
Just checked, my SPL is 1.37.0000, does that mean I can update?
Orange have their own version of the latest 1.93 rom
It has MINIMAL changes - mainly the auto set up of Orange data etc
It's really fast and stable
Give that a try
You can dowload an up to date ROM from the Orange (UK) website - I downloaded it a few weeks ago. It is version 1.93.405.1. It works much better and quicker and has no Orange specific branding. Why not go for that one as then your warranty will not be affected
Hi, could you link that ROM, please?
Can't find it on the website.
Many thanks.
Here it is, enjoy it before Orange push out 1.97:
http://preview.tinyurl.com/4zc38s
Vodafone are already there:
http://devicehelp.vodafone.co.uk/diamondupgrade.php
Hy!
allenf said:
Here it is, enjoy it before Orange push out 1.97:
http://preview.tinyurl.com/4zc38s
Vodafone are already there:
http://devicehelp.vodafone.co.uk/diamondupgrade.php
Click to expand...
Click to collapse
Hello!For Orange this is 1.93 and not 1.97.If yoy know where I can find the newest version,please let me know.Many thanks.KOEND
Orange are still on 1.93...
Would anyone know if the latest version is still 1.93.405.1? Or if there is another recommended version? I tried "cookie" and the few he has released which were nice but had some minor issues.
right now my htc diamond orange is unlocked means i can use any sim in the phone,so if i upgrade diamond orange rom to 1.93.405.1 version as u described here so it will lock the phone or i can use any sim?plss tellll
Hi all,
I had an O2 XDA Stellar which I believe is the HTC TYTN II. However, this phone was stolen a couple of weeks back. I purchased a second hand one today which is sim locked to the orange network. I managed to break the lock by following the instructions on this link http://forum.xda-developers.com/showthread.php?t=433835. I followed the instructions word for word till step 5.
The problem is now though it accepts the SIM and I can dial out, I don't have any audio on the calls So I can call and my phone also rings when I receive a call but I can't hear the caller nor can I be heard at the other end
Also, I hate the orange rom (and I used to complain about the O2 rom) and I wish to use the default HTC WM 6.1 professional upgrade the problem again is that it asks for a serial number and my serial number starts with DCOxxxxxxxxxxx and it says that this is not a valid serial number
What do I do now? Has my phone become a brick Please do help I can't bear the thought of having one stolen and the other toasted by me
All help will be greatly appreciated
fmervin said:
Hi all,
I had an O2 XDA Stellar which I believe is the HTC TYTN II. However, this phone was stolen a couple of weeks back. I purchased a second hand one today which is sim locked to the orange network. I managed to break the lock by following the instructions on this link http://forum.xda-developers.com/showthread.php?t=433835. I followed the instructions word for word till step 5.
The problem is now though it accepts the SIM and I can dial out, I don't have any audio on the calls So I can call and my phone also rings when I receive a call but I can't hear the caller nor can I be heard at the other end
Also, I hate the orange rom (and I used to complain about the O2 rom) and I wish to use the default HTC WM 6.1 professional upgrade the problem again is that it asks for a serial number and my serial number starts with DCOxxxxxxxxxxx and it says that this is not a valid serial number
What do I do now? Has my phone become a brick Please do help I can't bear the thought of having one stolen and the other toasted by me
All help will be greatly appreciated
Click to expand...
Click to collapse
Did you actually read anything or did you just start hacking away ? I will cut and paste a few items out of that thread, so that you don't have to actually read it .
PLEASE READ THE *FAQ* BEFORE FLASHING OR ASKING QUESTIONS!!!
* IF YOU DONT NEED TO FLASH A NEW ROM THEN PROCEED TO STEP 6 TO PUT YOUR DESIRED RADIO BACK*
7. After I flash a Rom I dont have any sound in calls and the camera is black
The Radio has to match the version of Rom you flash i.e. WM6.1, an incorrect Radio will give sound and camera problems. Read The Ultimate Radio Thread to find a Radio that matches the Rom there are lots to try on there if one doesnt work then try another.
3. What are the different types of Unlock?[/B] (answer by DaveShaw)
The three stages of unlock are:
SIM: Allows you to use SIM's from another carrier. Can be done using codes or unlocker programs on xda-devs.
Security: Allows you to flash radios from another device - It does other stuff, but this is all the casual user will use it for
CID: CID unlocking is an old concept, nowadays you flash HardSPL instead. This lets you flash any ROM, Splash or Radio (depending on sec unlock) to your device. N.B. the CID is the carrier ID (e.g. HTC__001). The stock SPL's only let you flash ROM's that match the CID in the ROM image with the CID on your device.
Obviously you did not unlock your phone if a serial number is needed to flash a new rom. I would re read everything and do it again
Thanks for the reply
denco7 said:
Did you actually read anything or did you just start hacking away ?
Click to expand...
Click to collapse
As a matter of fact I did read that more than once.
denco7 said:
* IF YOU DONT NEED TO FLASH A NEW ROM THEN PROCEED TO STEP 6 TO PUT YOUR DESIRED RADIO BACK*
Click to expand...
Click to collapse
As you can see I'm a bit of a newbie here, so wasn't too sure if I did need to flash to a new rom. But I did anyway. And the call problems still remain
denco7 said:
7. After I flash a Rom I dont have any sound in calls and the camera is black
The Radio has to match the version of Rom you flash i.e. WM6.1, an incorrect Radio will give sound and camera problems. Read The Ultimate Radio Thread to find a Radio that matches the Rom there are lots to try on there if one doesnt work then try another.
Click to expand...
Click to collapse
I've been through this link as well and I was contemplating installing the latest version of the HTC WM6.1 ROMS (version 3.34.721.2, radio version 1.70.19.09) available at http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs However I was not sure if this would be ok and (at the risk of sounding extremely dumb) I was not sure what WWE stood for
denco7 said:
3. What are the different types of Unlock?[/B] (answer by DaveShaw)
The three stages of unlock are:
SIM: Allows you to use SIM's from another carrier. Can be done using codes or unlocker programs on xda-devs.
Security: Allows you to flash radios from another device - It does other stuff, but this is all the casual user will use it for
CID: CID unlocking is an old concept, nowadays you flash HardSPL instead. This lets you flash any ROM, Splash or Radio (depending on sec unlock) to your device. N.B. the CID is the carrier ID (e.g. HTC__001). The stock SPL's only let you flash ROM's that match the CID in the ROM image with the CID on your device.
Obviously you did not unlock your phone if a serial number is needed to flash a new rom. I would re read everything and do it again
Click to expand...
Click to collapse
I maintained the default that was given by the unlocker for the CID (I think all zeros). Do I have to change this as per the ROM image? I don't mind re-doing this again it's a relief that my device isn't busted
No your phone isn't busted. Go into bootloader and check what it says next to spl, if you followed Mark's steps, it should say 3.29 Hard. If that is what it says ,then you can flash any Kaiser rom you want. If it doesn't then start over again.
WWE stands for World Wide English and those roms are all in English. That rom you picked will be fine, if you do not wish to explore the fine world of custom roms ? Maybe later.
You only have to CID unlock once by following the steps, not at every rom flash.
No sound means wrong radio, 6.0 roms need 6.0 radios and 6.1 roms need 6.1 radios. If the rom has a radio in it already then flash away.
Thanks Denco Flashed the ones I mentioned and it works perfect. Can't believe I actually have a working device Thanks for all your help, really great.
Now to sync my data to my new (second hand) htc and I'm good to go
Another question, the device works fine, however since it is a HK rom, it seems to have localised to HK. I've changed this as much as possible to UK. However, I'm wondering if this will affect anything else? For example the gps? Is there any quicker way to configure this globally so all settings use UK instead of HK?
Why didn't you flash the latest UK ROM.
Use this code: HT750GB02264 to download from HTC's site.
fmervin said:
Another question, the device works fine, however since it is a HK rom, it seems to have localised to HK. I've changed this as much as possible to UK. However, I'm wondering if this will affect anything else? For example the gps? Is there any quicker way to configure this globally so all settings use UK instead of HK?
Click to expand...
Click to collapse
Once you are unlocked and HardSpl'd you can flash any rom you want. Pick a UK one another WWE rom or a custom rom. Test a bunch until you have one you like. Your only restriction is it has to be a Kaiser rom. And with all the Kaiser roms available, it is not a restriction at all.
Mister B said:
Why didn't you flash the latest UK ROM.
Use this code: HT750GB02264 to download from HTC's site.
Click to expand...
Click to collapse
Wow, thanks for that, I was looking for a valid serial through which I can download from the htc uk site One question I had is do I install the radio which I download from htc? Or do I keep the one I have already flashed? The one I have flashed yesterday seems to be a later version than what I've downloaded from htc
denco7 said:
Once you are unlocked and HardSpl'd you can flash any rom you want. Pick a UK one another WWE rom or a custom rom. Test a bunch until you have one you like. Your only restriction is it has to be a Kaiser rom. And with all the Kaiser roms available, it is not a restriction at all.
Click to expand...
Click to collapse
1. I keep hearing on this forum about Hard SPL, I'm not sure what this is used for or why it is required but I followed the instructions and it seems I had installed JumpSPL1.56-KAIS.exe. Now, since then I had flashed the rom, so do I need to reinstall this again? Is there some other one I should be using? I come across different versions on some threads. Also, how can I check the version of HardSPL I have?
2. When I view the memory (under settings) it shows me Storage and Program. However, I can't seem to see any storage area in file explorer. I know in my old xda 2i, there used to be a separate storage area. The reason is because some of the apps I install are quite bulky for example lexisgoo english dictionary (the dictionary files themselves are about 18mb) and this fills up the main memory. How can I install this in the storage memory? (not storage card since I sometimes swap storage cards)
Sorry lot of questions I know, but I'm a newbie and all help will be greatly appreciated
The UK downloaded ROM will install the radio too.
I would do a bit of testing with your current set-up, then flash the UK ROM.
Test the new UK ROM & radio & then reflash the radio only if you want (do some searching on Radio versions)
Newer versions are not always best, chasing the latest builds normally bites you in the ass at the end of the day.
Check HardSPL by going into bootloader:
* Using a stylus, press and hold the soft reset button at the bottom of the phone along with the camera button
* Release both buttons once the bootloader screen appears
* Exit bootloader by pressing soft reset button
Once you have installed HardSPL thats it, job done (you installed it during unlocking)
What you see in file explorer regarding storage is correct: 128MB RAM for running software ect & 256MB ROM for storing your programs ect (WM2003SE was different)
ROM can be increased by using one of the cooked lite ROMs if storage space is a concern.
Mister B said:
The UK downloaded ROM will install the radio too.
I would do a bit of testing with your current set-up, then flash the UK ROM.
Test the new UK ROM & radio & then reflash the radio only if you want (do some searching on Radio versions)
Newer versions are not always best, chasing the latest builds normally bites you in the ass at the end of the day.
Click to expand...
Click to collapse
Will do, the HK version seems very stable, the only thing that bothers me is the region settings. Anyway, I think I'll give the UK Rom a go and if that works well I'll stick with it
Mister B said:
Check HardSPL by going into bootloader:
* Using a stylus, press and hold the soft reset button at the bottom of the phone along with the camera button
* Release both buttons once the bootloader screen appears
* Exit bootloader by pressing soft reset button
Once you have installed HardSPL thats it, job done (you installed it during unlocking)
Click to expand...
Click to collapse
I checked the version and this is what it showed:
KAIS130
SPL-3.2.9.Hard
CPLD-8
Click to expand...
Click to collapse
TBH, I don't know what any of that means But do you think the version I have is ok, or do I need to upgrade this to some other version?
Mister B said:
What you see in file explorer regarding storage is correct: 128MB RAM for running software ect & 256MB ROM for storing your programs ect (WM2003SE was different)
ROM can be increased by using one of the cooked lite ROMs if storage space is a concern.
Click to expand...
Click to collapse
I've attached a screenshot of my memory screen. The bit that puzzles me is that the storage area apparently has a lot more storage but I do not have an option to install all my applications on that area or atleast the bulky ones. I don't think I need a lite one since I do have 112MB free in the storage area which is more than sufficient for all the apps I usually install. Can you advise how I can install apps to the storage area as well?
Lastly, I was wondering if it is possible for me install my apps on the rom and then kind of take an image of my setup and flash the rom with this setup. That way when I do a hard reset, all my apps are installed again. Which will save me the trouble I know sprite backup does something like this but I'd prefer if it was in the rom
Thanks for all your help, it has given me a lot of confidence in these matters. Something I probably wouldn't have attempted
Mister B said:
Test the new UK ROM & radio & then reflash the radio only if you want (do some searching on Radio versions)
Newer versions are not always best, chasing the latest builds normally bites you in the ass at the end of the day.
Click to expand...
Click to collapse
I agree 101% and it appears fewer resources are put into ironing out bugs in the WM 6.1 ROMs than the WM 6.0 ones. I replied to fmervin's post in the ROM forums along these lines.
If all is running OK I would stick with your current HardSPL.
When installing your applications choose the option of installing to "Device"
You could install all your apps into a ROM, this would be cooking a ROM & is a complex process.
I would suggest a backup via Sprite or SPB. I use SPB v2.0 build3065 & it works well for me, preference of backup software is a bit of a Marmite scenario, you either love it or hate it.
Lastly, I was wondering if it is possible for me install my apps on the rom and then kind of take an image of my setup and flash the rom with this setup. That way when I do a hard reset, all my apps are installed again. Which will save me the trouble I know sprite backup does something like this but I'd prefer if it was in the rom
Click to expand...
Click to collapse
You can't do that, it is flash memory. It's not like you can partition the hard drive.
But this is the easiest way to get your Apps and settings back after a flash.
Try this Sashimi Auto installer by a former XDA member. It is a nice little program that installs all your apps after a flash
http://www.winmo-experts.com/viewtopic.php?f=7&t=4
Help Please
Hey Denco..Than'x for considering my thread & giving out suggestion towards the link to check the info. But i m really nt that techy afterall so i can burn a ROM on my Tytn II. Even though i tried to burn a RUU rom that supports TyTN II ..Its just gets disconnected from USB mode..So i was looking forward to start it initially with some comparatively easier to install .cab files..Can't these RUU files be transformed into .cab files or maybe some other version of Manila 3D cab file that is completely fixed...I seriously have done a lot of research upon this but nothing looks like working. So please if you have some links to .cab files that can give a better & different look to my Kaiser running Windows 6.1...It'l be a great help !!
Than'x & regards in advance
vicky_crispy said:
Hey Denco..Than'x for considering my thread & giving out suggestion towards the link to check the info. But i m really nt that techy afterall so i can burn a ROM on my Tytn II. Even though i tried to burn a RUU rom that supports TyTN II ..Its just gets disconnected from USB mode..So i was looking forward to start it initially with some comparatively easier to install .cab files..Can't these RUU files be transformed into .cab files or maybe some other version of Manila 3D cab file that is completely fixed...I seriously have done a lot of research upon this but nothing looks like working. So please if you have some links to .cab files that can give a better & different look to my Kaiser running Windows 6.1...It'l be a great help !!
Than'x & regards in advance
Click to expand...
Click to collapse
I think you need to decide what it is that you want to accomplish. Unless you cook your own rom, there is no way to add apps to the rom ( so that they will remain after a hard reset) Your rom is wyour phone's base operating system, it contains your OS (WM 6.1 ) and can only be replaced after completely erasing and replacing all files from the previous rom.
If it is a new rom you want, pick a rom that interests you and follow these instructions verbatim .
http://forum.xda-developers.com/showthread.php?t=433835
Your phone will go to the bootloader screen ( three color) and it will disconnect from usb during the process, but be patient until the end. When it says it takes ten minutes, it takes ten minutes. Leave the room if you have to , to keep from getting impatient.
If you just want to keep your OEM WM 6.1 and keep it simple, but change the look of your phone try this,
http://www.htcwiki.com/page/Manila+2D+and+M2D+Themes
This will change the look and feel of your phone with uninstallable .cab files and will not affect the rom or brick your phone by accident.
Hi folks, I have just got a T-Mobile Compact iv after handling a few HTC Touch Diamonds through my company and loving it in comparison with my old Vario 2 (HTC TyTN 1)
As I am on Contract with T-Mobile I have gone for the Compact iv version as it was free to me however Once receiving it I noticed the rom including the TouchFlow is a really really old version compared to what's on the Touch Dimaonds.
I have spoken to T-Mobile and they told me they can't supply a newer version but they have given me full permission to use the one on the HTC Website for the Touch Dimaond and if anything was to go wrong they will still support me.
I have a serial from one of the Diamonds we have here in the company in order to download the rom for my compact but I thought I would check here first as HTC refuse to give me any information as its a T-Mobile branded phone that the rom for the Touch Dimaond is perfectly fine for the UK Compact iv?
Thanks in advance for any information.
Regards,
Max
max_carpenter said:
Hi folks, I have just got a T-Mobile Compact iv after handling a few HTC Touch Diamonds through my company and loving it in comparison with my old Vario 2 (HTC TyTN 1)
As I am on Contract with T-Mobile I have gone for the Compact iv version as it was free to me however Once receiving it I noticed the rom including the TouchFlow is a really really old version compared to what's on the Touch Dimaonds.
I have spoken to T-Mobile and they told me they can't supply a newer version but they have given me full permission to use the one on the HTC Website for the Touch Dimaond and if anything was to go wrong they will still support me.
I have a serial from one of the Diamonds we have here in the company in order to download the rom for my compact but I thought I would check here first as HTC refuse to give me any information as its a T-Mobile branded phone that the rom for the Touch Dimaond is perfectly fine for the UK Compact iv?
Thanks in advance for any information.
Regards,
Max
Click to expand...
Click to collapse
A Touch Diamond ROM will work fine on a Compact IV. It´s a T-Mobile branded HTC Touch Diamond with a different cover. Hardware specs are all the same. So there's no reason why it wouldn't work. Just know what you're doing when flashing it. It could go wrong.
Thanks for the reply. I have flashed a few phones including HTC's and Nokias so I am not worried about flashing it, its part of my job being in IT I just wanted to ensure that the rom would work correctly encase there were any slight differences in hardware but I have got an HTC Branded Serial code so I will go ahead and download the rom upgrade
Thanks,
Max
max_carpenter said:
Thanks for the reply. I have flashed a few phones including HTC's and Nokias so I am not worried about flashing it, its part of my job being in IT I just wanted to ensure that the rom would work correctly encase there were any slight differences in hardware but I have got an HTC Branded Serial code so I will go ahead and download the rom upgrade
Thanks,
Max
Click to expand...
Click to collapse
Rom's could be found here to. They are all orignal roms.
See I would do that but as T-Mobile would normally no longer support you if you change roms and they have told me they will but as long as its downloaded from the HTC website I think I am going to be safe this time.
I wouldn't mind trying the 6.5 roms I am very intrested but I think I will wait until I have a spare phone
Regards,
HELP!! Won't run
:-( I tried to use the rom update but it says invalid Vendor ID then restarts my phone. It actually checking and finding I am running T-Mobile. Is there anyway around that?
Regards,
Max
Max, have a read of the wiki and you'll see there are a few things you need to do prior to flashing a new one. The most important one is installing HardSPL - this removes the invalid vendor id probs. Like I say, read the wiki and all will be clear.... if it isn't clear - don't risk it!
max_carpenter said:
:-( I tried to use the rom update but it says invalid Vendor ID then restarts my phone. It actually checking and finding I am running T-Mobile. Is there anyway around that?
Regards,
Max
Click to expand...
Click to collapse
Follow this tutorial and it should work. You could take a look here to.
Hi, I had just read all the instructions downloaded and installed the HardSPL from the second link you provided and Installed the orginal version (not the latest on that link as its what it said to try first)
I flashed it ok came back on but the screen is jurky and very slow when it finally finished coming back on it went straight to the customization screen which is normal for a flash but took forever (alot longer than I have seen before) once complete I then re-connected it back up and went to run the HTC Rom upgrade and still says invalid Vendor ID.
Am I undesrtanding this wrong and I need to copy certain files out of the HTC Upgrade and use them along side the files I downloaded with the HardSPL and use a mixture of files to get it working.
Regards.
Max
max_carpenter said:
Hi, I had just read all the instructions downloaded and installed the HardSPL from the second link you provided and Installed the orginal version (not the latest on that link as its what it said to try first)
I flashed it ok came back on but the screen is jurky and very slow when it finally finished coming back on it went straight to the customization screen which is normal for a flash but took forever (alot longer than I have seen before) once complete I then re-connected it back up and went to run the HTC Rom upgrade and still says invalid Vendor ID.
Am I undesrtanding this wrong and I need to copy certain files out of the HTC Upgrade and use them along side the files I downloaded with the HardSPL and use a mixture of files to get it working.
Regards.
Max
Click to expand...
Click to collapse
Did you successfuly flash the HardSPL into your device? You can check this by doing this:
To confirm is Hard-SPL is on your device, manually enter Bootloader by pressing the Volume Down and performing a soft reset at the same time. If successful you will see the tri-colour screen and the following will be displayed
Hard SPL 1.40.Olinex
DIAM100 MFG 64M
SPL-1.40.OliNex
I've checked what mine said, and this is what I've got back.
DIAM200 64M
SPL-1.93.OliNex
MicroP-Diam (LED) v11
So I guess you need a different HardSPL. Can someone confirm this for me? Checked my own MDA Compact IV map on my laptop and saw to files that I've used for flashing the HardSPL. Used Unsigned-Hard-SPL-Diamond-OliNex.zip and RUU_Signed_1_93OliNex_HSPL_UnsignedEdition.zip. Needed to overwrite RUU_Signed.nbh in the map for Unsigned-Hard-SPL-Diamond-OliNex with the one out of the map from RUU_Signed_1_93OliNex_HSPL_UnsignedEdition. This worked for me then. Added the files for you. So maybe this works for you.
I get:
DIAM200 64M
SPL-1.40.OliNex
MicroP-Diam (LED) v11
Have I done it with the wrong version now then?
I have tried using the files you have supplied and that worked as all the other flash things fail now so let me give it a go now that I have completed with your files.
Regards,
Max
max_carpenter said:
I get:
DIAM200 64M
SPL-1.40.OliNex
MicroP-Diam (LED) v11
Have I done it with the wrong version now then?
I have tried using the files you have supplied and that worked as all the other flash things fail now so let me give it a go now that I have completed with your files.
Regards,
Max
Click to expand...
Click to collapse
I guess it had to work. Don't understand why it didn't. Because the HardSPL flash worked for you I don't understand why you stil had the invalid Vendor ID message. I hope my version will work for you.
Well after I did your flash and it finally came back on and finished the customization, the TouchFlo no longer appeared, just got a blank home screen and stayed like that. I have started the HTC Rom upgrade and it is actually flashing this time,
at 19% as I am writing this.
So I will post my results when it has finished.
Thanks,
Max
URGENT! Rom Update Failed!
Hi I need some urgent help.
The HTC Rom Update was running through gets all the way to 100% on screen and on mobile and then the phone restarts and the software says 'Update Error'
the phone then restarts to Bootloader and says:
DIAM200 64M
SPL-1.93.Olinex V11
MicrP-Diam (LED) V11
PSOC-VICT STAGE_PVT v0x20
Upgrade ROM Code error
Please Try Again
I have tried using a completly different computer and run the upgraded rom flash again and again it runs all the way through then fails at 100% again.
HELP!!! What do I do,,, I have no phone now :-(
Ok I have managed to flash it back to the posted by Crazyrooster, in this thread and its working again now the T-mobile branding has now gone and in Device Info it says:
Rom: 2.03.405.2 WWE
Date: 12/19/08
Radio: 1.09.25.23
Which is the latest version right? So how come the HTC Rom update failed but flashing the one contained earlyier on in this thread suddenly works and reports the latest vesion?
Regards,
Max
max_carpenter said:
Ok I have managed to flash it back to the posted by Crazyrooster, in this thread and its working again now the T-mobile branding has now gone and in Device Info it says:
Rom: 2.03.405.2 WWE
Date: 12/19/08
Radio: 1.09.25.23
Which is the latest version right? So how come the HTC Rom update failed but flashing the one contained earlyier on in this thread suddenly works and reports the latest vesion?
Regards,
Max
Click to expand...
Click to collapse
I really don't have a clue. So the phone is working now with a original HTC Touch Diamond ROM? Very strange that it gave problems. When I flashed a phone (MDA Touch) for the first time it worked for me. When I flashed my MDA Compact IV I didn't have any problems.
Right,
I didn't use the HTC Rom as the last flash it was the one listed a few posts back and it reports:
Rom: 2.03.405.2 WWE
Radio: 1.09.25.23
However I have the following problems and I am not sure they are related:
1: Sometimes on call its crackling
2: Loud speaker is awful and very distorted
3: Internet not working on all programs (just phoned t-mobile and requested internet settings to be resent see if that works)
4: My hang up button doesn't seem to be working once the screen has gone off.
5: Signal seems to be very week.
Any ideas anyone?
Regards,
Max
Ok I have just spoken to T-mobile and they reckon if I phone HTC they will supply me back with the T-mobile Rom.
But until then as they are shut I might experiment with further flashes to see if I can get it working better because I do want the latest software runs so much smoother but the problems I am currently having I can't live with.
Max.
Ok, hmm I have in theory 'downgraded' the rom now on version
1.93.405.1 WWE downloaded directly from the HTC website radio version 1.00.25.05 and I still have the same problems:
crackling or fuzzing on calls,
the loudspeaker is a bit better quality but still a bit distorted (even at lowest volume)
internet works but for some reason, activesync wont work with our exchange server, msn mess doesnt work, you tube app.
still feels quite warm but thats prob all the flashing I am doing.
The latest HTC rom from their website still gets to 100% then fails and leaves no os on my phone just the bootloader.
One problem fixed the hang up key now works fine.
So I guess its just experimenting with the radio now and get a better signal.
So my problem is - I put android on my htc tytn II and it worked (well kinda) but anyway I decided to switch back to Windows Mobile...
I installed 1.27.x.x radio , found a Windows Mobile 6 ROM and put (Like in the instructions ) Kaisimg.nbh(renamed from ruu_signed.nbh) and Kaisdiag.nbh to my SD card and then started flashing... It flashed smth,rebooted automatically and started booting android again...
Then I hold again camera button + power+ reset and since then when I put EVERY .nbh file on my sd card and try to flash it it STUCK on "Loading.." If I try to flash it with USB It stays at 0%.
The only exeption is if I try to flash from USB the rom that I tried to flash before from my sd card.. then it starts 0%..1% and reboot the phone...
P.S: Please help me...I think my device is not Broken but I dont know what should I do to fix it...
To flash back to WM from android put your kaiser into bootloader (multi colored screen) Then connect to usb. Download any WM build that is recent (I suggest Phoenix 3 for this, you can flash whatever you want later). After you download it open and run the included RUU that came with it and it will flash it on there.
hmm, I also had experienced the similar problem on my 1st time flashing back to WinMo.
When you are trying to flash via USB cable and the process stopped at 1% I guess there is also a message about "Invalid vender ID" right?
and if the text in your bootloader (tricolor screen) doesn't mention anything about hard such as "3.29.0000" (not "3.29.hard")
then
you've lost your hard SPL that's why you cant flash any .nbh to your phone.
I had managed to solve this problem by flashing stock WM rom for kaiser. The rom also has to be suitable for your phone, I mean if your kaiser is originally from France, then use French kaiser stock rom. Or if you are using AT&T Tilt use kaiser cingular stock rom.
you can find the list of shipped roms for kaiser here :
http://shipped-roms.com/shipped/Kaiser/
If you still have the "invalid vender ID" error message, try another stock ROM.
Thanks man you're my hero! I though I lost my phone.. anyway i bought new one - Nokia 2730 Classic but Ill sell the kaiser...
Thanks Anyway ... you're god!
Have the same problem...
Firstly, I'd like to point that the reason for the hard SPL getting overwritten by an original SPL is NOT HAVING UPDATED HARDSPL to a newer version that prevents accidental overwrite. This is instructed in the previous steps before actually installing Android. That was my mistake (I had HardSPL 1.0 OliPof), and now I can't flash no rom to my Kaiser (which thankfully works quite well in Android).
What happens (please correct me if I'm wrong) is that "KAISDIAG.NBH" is a modified, standalone hardSPL that will flash to the phone the SPL that comes with the "KAISIMG.NBH" you put in your SD card with "KAISDIAG.NBH"). In my case, I used the WinMo 6.1 spanish version 3.29.412.0, which, resulted in my phone being flashed with the original SPL 3.29.
Now, it seems many users have fixed this locating the correct stock rom and flashing it in their Kaisers. But to others, like myself, nothing seems to work. I believe that this is because we not only need a stock rom for our specific Kaiser model, but also it has to be compatible with the SPL that accidentally got installed in the phone. The problem is what if such rom doesn't even exists?
I'm really thankfull for all I learned by reading the forums (and from my mistakes ) and I know I'm in no position to make requests, but here goes what I think could help the users like myself to fix this, if posible:
1) Guide to identify what model of Kaiser we have (maybe it's already there, I just couldn't find it)
2) Complete list (or lists) of stock roms (There are some around, those are easy to find I think, but it doesn't hurt to share different sources)
3) Something like a JumpSPL for Android would be more than awesome...
Thanks in advance to everybody, sorry for my own stupidity . Any idea or help would be much appreciated,
Daniel
hmm, I'm not sure if it has to be compatible with the SPL.
In my case, I was flashing a very old WWE stock rom which has original SPL 1.56.
I also had been very desperate because any stock rom I found seems doesn't work and I even didn't know where originally my kaiser came from because I get it from my uncle. So I tried to flash any WWE stock rom I could found but nothing works. I read from Wikipedia that based on my phone model (Kais100), this model was only sold as AT&T tilt for US. But the problem is my phone is HTC branded, not AT&T tilt. Well, based on this information I also tried to flash some cingular stock rom but the result was just the same.
After contacting HTC Customer care, I know more info about my phone. They told me that based on my phone product ID, my kaiser was originally shipped for US, but unfortunately they can't provide me stock rom for my phone model. So I searched myself but this time I had better objective : to search HTC branded rom but for US.
finally, after days of search. I've found the rom that is suitable for my phone. Its called HTC WWE Brightpoint US which has original SPL 3.29 at the bottom of the list on the website I told you on my previous post.
few weeks ago I also accidentally overwrite my HardSPL again, but this time I did it with the stock ROM which has original SPL 3.29. But this problem also solved by flashing the stock ROM I've found before via USB cable.
So, I guess it has nothing to do with spl version.
Keep tying don't give up.
Update: Step 1 completed! YAY
Using the serial number and some obscure google searching, I came to the conclusion my KAIS130 is australian. Cheers, mate!
I verified this by being able to download stock roms from the australian HTC site with my Kaiser serial number. But at the moment of writing this, have downloaded two roms and no luck yet. 5 minutes remaining for the third one... Wish me luck...
Daniel.
Well... Now what?
Tried all four rom-like thingies I could download on the HTC page, all of them returning error 294...
Now what? try to somehow extract the .nbhs from the exes and and use customRUU.exe? Try to flash from SD card?
Please help... Any ideas... I really want to get rid from that original SPL3.29.0000 It's evil!!! I think it won't never let me flash again.
Thanks,
Daniel
cuartetoraro said:
Tried all four rom-like thingies I could download on the HTC page, all of them returning error 294...
Now what? try to somehow extract the .nbhs from the exes and and use customRUU.exe? Try to flash from SD card?
Please help... Any ideas... I really want to get rid from that original SPL3.29.0000 It's evil!!! I think it won't never let me flash again.
Thanks,
Daniel
Click to expand...
Click to collapse
sorry to hear that..
well, extract the .nbh from exe and flash it via sd card is the method that made me overwrite my hard SPL in the first place.
hmm, did your phone comes with operator brand, such as three or something?
-Rif- said:
sorry to hear that..
hmm, did your phone comes with operator brand, such as three or something?
Click to expand...
Click to collapse
No, it's HTC unbranded. Now, something strange here: the label behind the battery has the serial number: HT830GB06075 and the P/N (guess it's part number) :99HCY194-00, but to the left of the camera, another label with the part number: 36H00563-00M and below says DATE:061107(TB02)/US.
I don't know if that's normal, but it caught my atention because my phone seems to have been dissasembled (little label over screw is teared). Maybe my Kaiser isn't Australian after all...