Hi guys..
Wonder if anyone could help. I'm fairly new to the rooting of phones
And the cynagenmod. I've been reading a lot on the Samsung galaxy s i9000 phones.
I have the the Samsung galaxy i9010 or the giorgio Armani model in the uk.
Its looks exactly like the captivate just rebranded. Does anyone know if its possible
To root or even install the cynagenmod? Any info would be much appreciated.
Thanks
Yes.
Welcome to the forum! Congratulations on your new phone.
Yes it is possible to root and yes it is possible to install cyanogenmod. The i9010 is more or less the same as the captivate, there are few differences. As I understand it, the hardware is the same, but the software is different, however I admit the possibility that I'm wrong. Here are some links that should help you out:
http://www.youtube.com/watch?v=SY-sckXonHA
The ROM he is uploading is based on the i9010, so the methodology should work. That is to say: As he is a member of the build team he should know what he's doing.
http://wiki.cyanogenmod.com/index.php?title=Samsung_Galaxy_S:_Flashing_CyanogenMod
Cyanogenmod's wiki and how-to, there is a video on youtube, but it's out of date, they have a new method now
http://forum.xda-developers.com/showthread.php?t=803682
Super one click thread, several have confirmed that it works to root i9010, I recommend downloading this instead of the one he points out in the video...come to think of it, it might be the same one. Take no chances though, use this one, it will work.
There are more threads out there about it though, so try using the search tool at the top of the page.
On a personal level, I've found that CM7 is a bit glitchy, if I may make a suggestion, try Mosaic III, it's a GB rom as well, but it works better with the SGS hardware. Good luck and happy hunting. Also, have you watched the XDA introduction video? http://www.youtube.com/watch?v=JmvCpR45LKA
Related
I've had my phone for just over a month and I've only gone as far as rooting and flashing through Kies. I was one of the unlucky ones to have my 3BR disabled, and I managed to get that back through editing the registry of Kies. This is all I've managed to do with my phone, as I'm too scared to do anything else.
I'd like to use this thread as a guide of what we, as Bell Galaxy users, can do with our phones when it comes to flashing firmwares. Obviously we have to be selective of which ones we use.
My first question would be... Has any Bell Galaxy users flashed other firmwares besides GJ9 and JH2 with good results? When I say good results, I mean no further tweaking of the phone to get it to work the way it should. If you have flashed other firmwares, what did you find was the most stable?
EDIT: Holy crap guys... I'm so sorry. There's already a thread that's damn near identical to this one and I didn't spot it. Thank goodness I double-checked. Mods have my permission to delete this one if they'd like. I'm going to post a link to the other thread, which may help seeing how I think this thread title is a little more fitting.
http://forum.xda-developers.com/showthread.php?t=781349
I had an HTC LEGEND which I rooted and used Blayo’s rom on, and then
later a stripped down version of it. I loved it, made my phone faster everything worked great and it updated me to 2.2
Now I’ve got a new phone the Bell Samsung Galaxy S Vibrant and I’ve heard that the modding community has done some fantastic work for this piece of hardware. I’ve been creeping on the forum for the last couple of days and noticed a few things.
First it seems like a bit more work to flash the phones, and second that there’s a lot more options with things like kernals and such. Despite reading through pages of intellectual jargon I’m still feeling a little overwhelmed in what choices to make. Perhaps if I listed the features I was looking for someone could point me in the right direction?
I can follow the directions that forum members have posted easily enough I just can’t decide what is right for me when it comes to flashing the phone.
Here’s what I’m looking for:
I like the stock rom look and enjoy the layout of the phone, contacts, apps and messaging home row.
I would really like to have better battery life as I feel the phone really doesn’t last long.
I hear that there may be some better GPS tweaks? I use the GPS lots when I’m out of cell range with pre-loaded backroad maps. It’s REALLY important to me that this works as it could get me home at night or leave me stranded in the dark during hunting season if it doesn’t work.
I’d like to get rid of all the bell and Samsung bloatware. I didn’t really seem to care for any of the stuff they had pre-loaded.
I’d like to keep the voice dialer, calendar for sure along with the
contact manger – it’s sweet.
I don’t really like the pre-loaded internet app been using Dolphin mini and loving it.
I would like it to be as stable as possible I don’t want to be having to tinker
with it all the time.
Based on these prerequisites and that knowledge that my phone is:
Samsung Galaxy S Vibrant from Bell i9000m
Any suggestions?
LegendDroid said:
...
Based on ... knowledge that my phone is: Samsung Galaxy S Vibrant from Bell i9000m
Any suggestions?
Click to expand...
Click to collapse
Yes. I'd suggest checking out the Vibrant forums .
You've got the right forum! The Canadian "Vibrants" are not the same as the "Vibrants" from the US. What is the manufacture date of your phone? It should be located behind the battery. I had a galaxy s from Aug (from Bell) and I found the GPS really bad. It improved with the updates but would still put me on wrong roads, etc. However, I now have a phone made in Dec. 2010 and it seems like the GPS is much better than before (without any tweaks or anything). It actually works with google navigation now! I would recommend you test out the GPS thoroughly (without assistance from towers) before going on any big trips. I went on a 9 hour drive with my old SGS' GPS and it was terrible.
oops, forgot to mention that seeARM has a rom based off of stock Bell JL2 ROM. If you are worried about the possible internal SD issue that was happening a month or so ago, this seems like a safe bet. It does seem like the issues have been solved though.
http://forum.xda-developers.com/showthread.php?t=906977
It says that the stock launcher is included so you can keep the touchwiz, contact manager, etc. I think there's still some bell bloatware on but I believe you can remove them through programs like titanium backup.
LegendDroid said:
...Based on these prerequisites and that knowledge that my phone is:
Samsung Galaxy S Vibrant from Bell i9000m
Any suggestions?
Click to expand...
Click to collapse
TonyG_Au said:
Yes. I'd suggest checking out the Vibrant forums .
Click to expand...
Click to collapse
LegendDroid said:
...Based on these prerequisites and that knowledge that my phone is:
Samsung Galaxy S Vibrant from Bell i9000m
Any suggestions?
Click to expand...
Click to collapse
Hes got the right Forums buddy This is the Canadian version of the Vibrant not the T-mobile one
Hello guys.
I'm sure the majority of you get sick of seeing people with no clue on how to do stuff on their Android phones, and I apologize in advance, but I used to be an iPhone user before swapping over and becoming a Droid, however, O2 in the UK are awful, and they don't update the handsets, I'm still on 2.2 Froyo, instead of 2.2.1 or even 2.3 Gingerbread.
I'm looking to the possibility of getting a capable Gingerbread ROM onto my phone, but I have absolutely no clue how to do it, don't get me wrong, I look on the XDA forums on quite a regular basis, and I'm aware of Darky's ROM, and the rest, however, I look at the HOW TO posts explaining how to get it onto your phone, and some of them are unbelievably basic, and for a start off user using an Android phone wanting to get the best out of it, but not knowing how to do the majority of things such as Rooting, and Flashing, it's impossible to understand the majority of the posts on this forum.
I used to jailbreak all the time, but that was easy compared to this, some may say Droid's are easier to do, but I disagree, if anybody has any tips, or step-by-step up to date guides on how to get a ROM/kernel etc onto my phone, or make it quicker, or quite frankly anything, as my phone is unbelievably laggy, it would be MUCH appreciated.
Many Thanks in advance.
The first and biggest problem for you is to choose what rom you want becouse there is alot of custom roms out there and noone can help you with that.
As for how to flash there is often lots of different ways of doing it depending on what rom you are on and this is probably whats confusing you.
Becouse your on a stock rom without any moddified recoverys you need to flash with a computer program and your phone connected to usb.
Best guide is probably the one from EZbase and this is a good rom to start of from anyway becouse it will give you root and a good moddified recovery.
http://forum.xda-developers.com/showthread.php?t=991792
Just read post number 4 to the letter and you can't go wrong!
hi
i just got a samsung dart from my girlfriend
it says that this phone also is galaxy mini so i have a question will ANY of these roms work on a rooted samsung dart?
Apparently yes, since Samsung Dart is a Galaxy Mini renamed by T-Mobile. But only testing can confirm...
hmmm.....im going to try one im running cm7.1 i found on a dart forum but ill report back
Some work done don't even boot
Sent from my Galaxy Mini (SGH-T499) using Tapatalk 2 Beta-2
squidbutt said:
Some work done don't even boot
Sent from my Galaxy Mini (SGH-T499) using Tapatalk 2 Beta-2
Click to expand...
Click to collapse
Too bad... could you at least return to the original ROM (assuming you were using original stock ROM)?
If you could give us more details...
shame
i just purchased the t-499 myself and its a shame that such a new/great phone has so little support, ive looked all over google and only gotten mixed answers and dead end threads. icant even figure out if galaxy mini roms are cross compatible to the dart or not. its actually a good phone with a decent screen if u change the lcd_density to 100 the resolution is pretty decent.
if someone can help me a little it would be greatly appreciated, atleast point me in the right direction.
Not sure where else to post this, but can someone tell me if I can use a bootanimation.zip on the Samsung Dart? I've looked at a lot of threads on how to do this, used ROM toolbox to move files around, but haven't had any luck. I'd just like to know for sure so I don't drive myself crazy and waste more time!
D1358531 said:
Not sure where else to post this, but can someone tell me if I can use a bootanimation.zip on the Samsung Dart? I've looked at a lot of threads on how to do this, used ROM toolbox to move files around, but haven't had any luck. I'd just like to know for sure so I don't drive myself crazy and waste more time!
Click to expand...
Click to collapse
On he stock Dart rom, no.
Samsung apparently uses some weird proprietary bootanimation format.
I am running the CM7 port in my sig from the MadTeam Forums and it of course uses bootanimation.zip's and I even have enabled boot sounds on it.
It's a good rom, couple of really minor bugs like button lights don't work and slow to wake on incoming calls, but overall quite stable.
Bummer....I guess I'll have to wait til I can upgrade to a new phone
they have make new rom for dart
ShawnnKushh said:
i just purchased the t-499 myself and its a shame that such a new/great phone has so little support, ive looked all over google and only gotten mixed answers and dead end threads. icant even figure out if galaxy mini roms are cross compatible to the dart or not. its actually a good phone with a decent screen if u change the lcd_density to 100 the resolution is pretty decent.
if someone can help me a little it would be greatly appreciated, atleast point me in the right direction.
Click to expand...
Click to collapse
How do you change the lcd_density to 100 in the stock ROM?
Hi gang.
First off an apology if some of this/ all of this has been heard before. I spent all morning trawling forums and the internet in an attempt to fix the problems, but none seem to be anything I can deal with without getting some guidance from people in the know beforehand.
I have had my Galaxy tab GT-P1010 for a couple of years now and been very happy. It was origionally running Froyo, which is what the models ship with. Foolishly I presumed any updates from Samsung would be a benefit to the tab. The device is now rather clunky. Scrolling is slow and sluggish, programs crash without warning and the latest trick is that dialogue boxes are non-responsive (i.e. 'your phone will shut down: ok, cancel' does nothing when I press either option. Repeatedly. In rage.) The only option I have now for shutting down is to let the battery bleed out or hold the power key to switch off. I've tried things like factory reset, but even after reset, I'm still left with stupid old gingerbread.
Looking around there seem to be some options, but after reading through several times, I still have no clue. I understand that part of the problem is samsungs 'bloatware', of which there is plenty.
I'm not really sure how to go about it- I understand there are programs out there- Odin, Nandroid etc, but I'm a little lost on the lingo, and a little reluctant to go poking around without any decent knowledge.
Can anyone help? Or is this really a 'send it back to smasung job? It looks like I'm faced with these options:
1) somehow backdate from Gingerbread to Froyo
2) Strip out the samsung OS and install another launcher (which sounds like a can of worms to me)
3) send it back to Samsung and never EVER touch another one of their stinking updates.
4) another straightforward option that I haven't considered
Please help! (bear in mind I'm a total code-tard)
Return to froyo if that is the state where you are most comfortable with.
Another option would be, buy a new tab with better specs.
Sent from my boyfriend's home
Actually, the best solution is to UPgrade, not downgrade. There are many decent guides out there for modding your Galaxy Tab and flashing a custom ROM. Personally I've found that the stock Android ROMs (the device's OS, so to speak), particularly the older ones, are very slow in and of themselves. If you want, I can guide you through the process, PM me if you feel like it. Or you can PM a veteran like priyana, he has the biggest Thanks Meter I've seen so far on this end of the forums.
Modding your system, from personal experience gives you a major performance boost. You should first try this alternative before thinking about buying another device.
I scan the forum often, and thanks for the good words, geno,
But I don't know much beyond P1000 model.
But there are a few threads for P1010 that seems solid and has good followers.
Sent from my GT-P1000 using xda app-developers app
priyana said:
I scan the forum often, and thanks for the good words, geno,
But I don't know much beyond P1000 model.
But there are a few threads for P1010 that seems solid and has good followers.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
You deserve them man. Anyway, how different is the P1010 from the P1000? My own model, the NTT DoCoMo SC-01C, is actually nothing more than a rebranded P1000. Surely the operations can't be all that different for another model of the Galaxy Tab line. Does the Overcome kernel and ROM, for example, flash on other models or is it exclusively for the P1000?
EDIT: To the op, I actually did some looking around and found that the P1010 is something of a black sheep in the Galaxy Tab line. There are few, if any, custom ROMs for it, but there were a few threads that describe tweaks for performance and other things. They are the following:
Galaxy Tab GT-P1010 (WiFi Only) NooB Guide (you've probably already seen this)(you should also check the Thread Consolidation post somewhere there)
This thread shows some promise for CyanogenMod on your device, but it seems to have dropped off.
This thread might help you with your lag problem, as it (supposedly) brings you to the latest Gingerbread build.
In summary, though, it looks like I spoke too soon. There may, in fact, not be a better alternative than simply getting a new device. The Nexus 7 is currently hailed as one of the best Android tablets out there, and I find that it's pretty reasonably priced at $199 or so.
The open nature of Android is one of the reasons I love it so much, but if you can't do much with your particular device then you're not getting the most out of what Android has to offer. If I were in your shoes I'd probably switch if I had the money for it.
Anyway, that's the best I can do. Good luck with your device, man. If you ever decide to try tweaking it and/or need to ask some questions about the applications involved and other terms and such, priyana should be able to help you.
Sent from my GT-P1000 using xda app-developers app
Apparently the hardware is quite different. Your SC-01 is still quite close.
The heart of the ROM is the kernel and if the hardware is different, the kernel is bound to be different.
Not many top devs looking at P1010, so I think not much poking into the kernel been done.
Sent from my GT-P1000 using xda app-developers app