my power/screen lock button is stuck i believe, my phone is rooted and i wanted to flash back to stock but i can't enter download mode using the vol up/down method because the power button is stuck i think and it keeps taking me to the recovery/reboot screen. is there another way for me to enter download mode? i tried using the abd method but everytime i type what it says in the command prompt, it says that pathway is not recognized or something. please help me!
if someone can tell me how to do the abd method, it would be greatly appreciated
I have no idea where you have adb installed I can't tell you how to navigate there properly.
A jig will force download mode.
i finally got the adb to work, but when i got it into download mode to flash back to stock, my USB got unplugged! just my luck right? now its stuck in that "phone+!+computer" screen...how do i get out of this or will i still need a jig?
Damn that sucks dude.
Adb is of no use now, try the button combos a few more times, if that don't get it to dl mode you will need a jig.
Better than being bricked though!!
You can still recover from this.
studacris said:
Damn that sucks dude.
Adb is of no use now, try the button combos a few more times, if that don't get it to dl mode you will need a jig.
Better than being bricked though!!
You can still recover from this.
Click to expand...
Click to collapse
damn i was hoping it wouldnt come to that. do you think if i bring it to ATT device support and say i decided to mess around with my phone one day and that just happened they would give me a new phone? haha, because i mean, it is because the power button is stuck so i can't "release" the power button when it needs to be released in the process of fixing it right?
Good point, I've been hopping around threads all day and forgot that was your issue ... Tell them about the power button thing and that you were using kies to update thinking it would fix the issue but something happened during the process "idk maybe the power button was still stuck" you should be ok.
sounds like a legit response! i'll give it a try after work
studacris said:
Good point, I've been hopping around threads all day and forgot that was your issue ... Tell them about the power button thing and that you were using kies to update thinking it would fix the issue but something happened during the process "idk maybe the power button was still stuck" you should be ok.
Click to expand...
Click to collapse
Haha that's awesome Studa You really are evil.. Tech support on breaking phone and lying to at&t reps
Sent from my Mosaic powered I896 using Tapatalk
it worked, brought it to the DSC and they gave me a new phone.
Muhahaha noone can stop the evil deeds of darth studa!!
Glad it worked out for ya!
Related
Hi all,
My phone is now bricked with the phone--!--pc symbol on bootup, and I tried to search for solutions everywhere but no go. Please please help me with this as I don't have unlimited warranty on this phone... and won't be able to exchange...
So, the root of the problem is that the normal hold down volume + plug in cable OR hold down three buttons until it reboots twice to go into download mode will not work on my phone! nothing happens at all when I try that, (I even tried every single button combination and holding them for a period of time...)
Here is what happened:
I wanted to get Froyo running on my phone, so I tried to follow directions using the Froyo leak.
I tried to get it into download mode when the phone was running and operational. None of the normal methods would work (volume button OR three button combo)
I eventually got it to go into download mode by using adb, and typing command adb reboot download.
adb got my phone into download successfully, i see the shovel, odin sees my phone, i was happy and started the odin process on my computer.
3 hours passed... odin was stuck at DO NOT TURN OFF TARGET message, phone was still showing the shovel
I thought something must have gone wrong and tried to start the process again.
This is where I am now, adb will no longer recognize the phone, and none of the button combinations will get me to download mode, all I see is the phone--!--PC symbol on startup.
I really have tried to search everywhere for a solution to this, but other than the 2 buttons+plug cable OR three button reboot twice, I can't find another way that will either allow me to get into download mode and try odin again, or just do a factory recovery.
Thank you guys so much! I really need some help on this one....
I don't suppose your battery is dead? Something to try - put the phone on your charger for about half an hour, then take the battery out for about 5 minutes. Make sure your sim/sd cards are removed, then install the battery, hold both volume buttons down, and connect the usb cable from the pc to your phone.
You can also make a download jig, which I'm told works wonders.
http://forum.xda-developers.com/showthread.php?t=819551
I was hoping that I don't have to go with the full out hardware solution, but I guess that's the way this piece of brick is demanding...
will update on what happened. thanks, kegobeer!
I am in the same boat as you are.....
jetzhou said:
I was hoping that I don't have to go with the full out hardware solution, but I guess that's the way this piece of brick is demanding...
will update on what happened. thanks, kegobeer!
Click to expand...
Click to collapse
Jetzhou,
I am in the same boat as you are. So do you have your problem figured out yet???
I am in the hope that now you can shed some light for me.
Not sure if you guys have seen this post or not, but just in case you can get into download mode somehow, this may help get your 3 button working again. There may also be some people in the same position as you that may have posted in this tread.
http://forum.xda-developers.com/showthread.php?t=818439
Gr8Danes said:
Not sure if you guys have seen this post or not, but just in case you can get into download mode somehow, this may help get your 3 button working again. There may also be some people in the same position as you that may have posted in this tread.
http://forum.xda-developers.com/showthread.php?t=818439
Click to expand...
Click to collapse
The problem is I can not get into the Download Mode. It is just stuck in the booting loop and I can not get in either Download or Recovery mode. As soon as I plug in the USB, the phone is shut down to the battery charging screen.
I am desperated!!!! Please help.
Bi_Dao said:
The problem is I can not get into the Download Mode. It is just stuck in the booting loop and I can not get in either Download or Recovery mode. As soon as I plug in the USB, the phone is shut down to the battery charging screen.
I am desperated!!!! Please help.
Click to expand...
Click to collapse
The way I have been doing it is by getting Odin running, hold the vol up and vol down then plugging in the usb. I'm sure you may have already tried it that way, but just in case you used the pwr and one of the vol buttons instead, I thought I would mention it.
I know there have been problems with some people's hardware too, so there is a possibility of that.
not every phone has the button combo for download mode. it sounds like your boned, you should of talked to a few people before trying this kind of thing, its not hard but can easily be done wrong.
Look up on my posts in my profile I help a lot of people already going to download mode without using 3 button combo.
Sent from my T-Mobile G2 using XDA App
How can I get in to download mode if Im using steam recovery? I have a brick on my hands!
eramming said:
How can I get in to download mode if Im using steam recovery? I have a brick on my hands!
Click to expand...
Click to collapse
Can you access adb? If not, get a jig.
newb here. how can i get in to adb on my laptop? i have the drivers and odin installed already im trying the button combos and all i can get is the att screen and the gt9000 screen. I can also get the steam recovery screen but it just asks if i want to install the steam kernel or not and it doesnt do anything no matter which option i choose
eramming said:
newb here. how can i get in to adb on my laptop? i have the drivers and odin installed already im trying the button combos and all i can get is the att screen and the gt9000 screen. I can also get the steam recovery screen but it just asks if i want to install the steam kernel or not and it doesnt do anything no matter which option i choose
Click to expand...
Click to collapse
Check out this link:
http://developer.android.com/guide/developing/tools/adb.html
adamholden85 said:
Check out this link:
http://developer.android.com/guide/developing/tools/adb.html
Click to expand...
Click to collapse
thanks! Odin recognizes the phone but the phone gets hung up on the gt-i9000 boot screen so i cant get it into download mode. I'll work with the adb and see if i can figure it out otherwise i'll hit the radio shack for a jig and if that fails i'll have to trade it in at att under phone insurance.
eramming said:
thanks! Odin recognizes the phone but the phone gets hung up on the gt-i9000 boot screen so i cant get it into download mode. I'll work with the adb and see if i can figure it out otherwise i'll hit the radio shack for a jig and if that fails i'll have to trade it in at att under phone insurance.
Click to expand...
Click to collapse
You shouldn't be seeing any sort of boot screen if you're trying to get into download mode.. Do this: Pull your battery out and take out your sim and sd cards. Connect the phone by the usb. Hold down both up vol+down vol (do NOT hold the power button), and while holding those buttons, put the battery back in. It should take you directly into download mode.
eramming said:
thanks! Odin recognizes the phone but the phone gets hung up on the gt-i9000 boot screen so i cant get it into download mode. I'll work with the adb and see if i can figure it out otherwise i'll hit the radio shack for a jig and if that fails i'll have to trade it in at att under phone insurance.
Click to expand...
Click to collapse
You made sure you had the three button fix working before flashing right? Steam doesn't touch the bootloader, and if you're seeing the gt-i9000 screen, your bootloader is good (and so is download mode). If Odin's picking up the phone, you should be able to get adb to reboot it to download if nothing else. And as always, the jig method.
i cant get adb to recognize the device when i type adb devices.drivers are good. my serial number wont come up so cant issue any commands to reboot it or put it into download mode. i assume its because its stuck at the boot screen. i dont think i have the 3 button fix. I was using serendipity 3.5.2 with the oc\uv kernel and wanted to flash back to my previous rom and thats where my problems started. i guess the jig is up!! LOL
eramming said:
i cant get adb to recognize the device when i type adb devices.drivers are good. my serial number wont come up so cant issue any commands to reboot it or put it into download mode. i assume its because its stuck at the boot screen. i dont think i have the 3 button fix. I was using serendipity 3.5.2 with the oc\uv kernel and wanted to flash back to my previous rom and thats where my problems started. i guess the jig is up!! LOL
Click to expand...
Click to collapse
Did you try the usb/removed battery method posted above? I know it works for me and my phone does not have the 3 buttons fix...
Slowb00st said:
Did you try the usb/removed battery method posted above? I know it works for me and my phone does not have the 3 buttons fix...
Click to expand...
Click to collapse
i tried every button combo known to man! LOL I got jiggy with it and that did the trick. Im back up and running. the good to come out of this is that i did so much research and reading i think i consider myself a novice now! Im schooled in adb now too! thanks for all the replies. thread closed
Volume down + home + power always works.
Sent from my SAMSUNG-SGH-I897 using XDA App
The button order for odin that you list above never really worked well for me personally, but I found one that did.
Battery out
Start Odin
Hold volume up+volume down, THEN plug into USB
Using it this way, you never, ever touch the power button on the phone.
Maybe I've been lucky, but I've never had it fail using it this way.
jeromekobriger said:
The button order for odin that you list above never really worked well for me personally, but I found one that did.
Battery out
Start Odin
Hold volume up+volume down, THEN plug into USB
Using it this way, you never, ever touch the power button on the phone.
Maybe I've been lucky, but I've never had it fail using it this way.
Click to expand...
Click to collapse
+1
I've had success with this, as well.
i think this same thing happened to me. Most kernels actually arent able to be used with steam recovery only meant to be used with clockworkmod. THat means in order for your phone to work properly again you have to download a mod that actually works with steam, such as serendipity. So download that, plug your external sd into your computer put it on there, then through steam select intall zip, external sd and select the serendipity zip. Hopefully that will allow you to boot up your phone, download rom manager, click flash clockworkmod recovery, and then you can download any of the roms you want since almost all of them work with clockworkmod
Hola fellow XDA-ers...
I have searched and can't find a solution...and seems that I might be perma bricked but some forums indicate I am now. So help!
My phone will not enter into a download mode. All I get is an exclamation mark triangle connecting a phone and a computer icon.
I have tried both volume down and both volume buttons for power and to enter into DL mode, but it just goes back to the icon screen with the exclamation point.
Any help is greatly appreciated...I was trying to flash back to stock using ODIN to update my Cognition because I got stuck not being able to update it through CMO.
You need a jig... http://goo.gl/0p52o
First: wrong forum, you should be posting in Q&A
Second: remove battery, hold volumeup+volumedown+power and insert battery. Remove your finger from the power button after you see it restart the first time. If it does not enter download mode after it starts and restarts, press the power button again. Keep your volumeup+volumedown buttons pressed during this procedure
Noone ever needs a jig. Jigs are a money making tool.
I've flashed bad kernel after bad kernel and have never once required a jig.
falabarce said:
Hola fellow XDA-ers...
I have searched and can't find a solution...and seems that I might be perma bricked but some forums indicate I am now. So help!
My phone will not enter into a download mode. All I get is an exclamation mark triangle connecting a phone and a computer icon.
I have tried both volume down and both volume buttons for power and to enter into DL mode, but it just goes back to the icon screen with the exclamation point.
Any help is greatly appreciated...I was trying to flash back to stock using ODIN to update my Cognition because I got stuck not being able to update it through CMO.
Click to expand...
Click to collapse
this happened to me too, I can't remember what i did to get into that weird state.. but your definitely not totally bricked. Have you tried using a usb from power off standpoint- Pull battery, replace.. make suer usb is plugged into computer and while holding BOTH vol up and vol down, connect usb to phone STILL holding vol buttons utill Download mode appears.
Only other suggestion i can make is to pick up one of connexion2005's jigs. 8 bucks- forces your phone into DL mode from bricked/off standpoint. I use it all the time and I have never bricked!
AdamOutler said:
Noone ever needs a jig. Jigs are a money making tool.
I've flashed bad kernel after bad kernel and have never once required a jig.
Click to expand...
Click to collapse
you need one if you have a bricked captivate.. or you can make your own.. either way the phone doesn't come back to life like magic.. a jig does that.
Coreym said:
you need one if you have a bricked captivate.. or you can make your own.. either way the phone doesn't come back to life like magic.. a jig does that.
Click to expand...
Click to collapse
True! 10 chars
AdamOutler said:
Noone ever needs a jig. Jigs are a money making tool.
I've flashed bad kernel after bad kernel and have never once required a jig.
Click to expand...
Click to collapse
Does not happen often but some times you do need it so dont misinform people mate
I back you up Coreym, 110% I bricked my phone more times than I can count (or my wife cares to hear about), and I've always been able to fix it.
I just run odin one click, pull battery, to kill boot loop, put battery back in, hold down volume buttons, and plug in usb, to get into download mode.
Once odin reads phone, click start, and it flashes default at&t kernel. Then go through odin3 reload your cwm and boom, back to flashing.
No JIG used.
Sent from my SGH-I897 using XDA Premium App
Being Bricked is the Bricks...
falabarce said:
Hola fellow XDA-ers...
I have searched and can't find a solution...and seems that I might be perma bricked but some forums indicate I am now. So help!
My phone will not enter into a download mode. All I get is an exclamation mark triangle connecting a phone and a computer icon.
I have tried both volume down and both volume buttons for power and to enter into DL mode, but it just goes back to the icon screen with the exclamation point.
Any help is greatly appreciated...I was trying to flash back to stock using ODIN to update my Cognition because I got stuck not being able to update it through CMO.
Click to expand...
Click to collapse
Hey man,
You mean update through CWM?
Anyway, not sure if you found a resolution to your issue as of yet.
If not, try this, it really couldn't hurt at this point...
Apparently you have Odin and I'm guessing you're on a PC (Windows)
I'll assume you already have a stock factory ROM and PIT file (For Your Device) - if not you need to acquire these first.
Ensure you have the correct version of Odin. Some are recommending v1.7 or v1.52 - I personally use Odin v1.82
"Pluck" or Pull the battery from the device, remove the SIM and any external storage card (if any). *I just felt like using the work "Pluck" out of the context of harp playing...
Ensure the latest Samsung Drivers are installed on the PC (assuming you're on a Windows X86 or X64) and bounce the PC (reboot) Driver cache sometimes sticks...
Plug in your USB cable to the back panel of the PC (USB v2.0 or 2.2 is preferred but USB v1.0 will work) - Plugging into a front panel (for some odd reason often finds a way to disrupt order amongst the driver pool and creates havoc within Mass Storage in the DM. (Device Manager)
Now turn your device on.. (Just kidding...)
Open Odin first - then - plug the cable into your device and withing a few seconds Odin should detect a com port: (any port is fine - 3, 5, 4, 2, etc...)
Once the com port is seen, select the correct PIT file from the PIT menu in Odin and automatically the format partition check-box will populate. (I say to re PIT the device with correct PIT (should be a 512 PIT) because it sounds as though there may be some damage to the boot loader and the respective system partition. The PIT file is supposed the restore these partitions back to factory defaults provided you select the correct PIT file.
*Note - I wouldn't recommend using the PIT file for "every" ROM flash they you do, but at times it is necessary when flashing certain ROMs.
Now select the PDA (ROM you wish to flash) from the browse menu in Odin.
Make sure the check box is selected for reboot after flash.
Let the process take place - complete the flash and wait patiently for the new image or ROM to calibrate and load. (It may take a while)
Once loaded unplug the USB cable, replace the SIM and Ext Memory card then the battery and fix whatever settings you need to (ie: ATN, efs, WiFi, WAP, etc...)
Give it a go and see what becomes of it...
HtH
Peace-
AdamOutler said:
First: wrong forum, you should be posting in Q&A
Second: remove battery, hold volumeup+volumedown+power and insert battery. Remove your finger from the power button after you see it restart the first time. If it does not enter download mode after it starts and restarts, press the power button again. Keep your volumeup+volumedown buttons pressed during this procedure
Noone ever needs a jig. Jigs are a money making tool.
I've flashed bad kernel after bad kernel and have never once required a jig.
Click to expand...
Click to collapse
Jig is useful for people who doesnt have 3 button combo fix like me
I am on same screen from last week (waiting for my jig)
your method didnt work for me..everytime phone restarts to show phone-!-computer screen...
viny2cool said:
Jig is useful for people who doesnt have 3 button combo fix like me
I am on same screen from last week (waiting for my jig)
your method didnt work for me..everytime phone restarts to show phone-!-computer screen...
Click to expand...
Click to collapse
did you try from powered off and usb plugged into computer-- holding down both vol buttons, while still holding both vol buttons plug usb into phone.. For some captivates this will work. It works with mine. Try that if you haven't already
Coreym said:
did you try from powered off and usb plugged into computer-- holding down both vol buttons, while still holding both vol buttons plug usb into phone.. For some captivates this will work. It works with mine. Try that if you haven't already
Click to expand...
Click to collapse
He has (I think I remember telling him to do the same thing a while ago). He's most likely using a Cappy that's 1010 or greater.
This is why some people need the "3 button-fix" and whatnots as well. Right now at his/their current state, only a USB Jig will work since none of the combinations work properly.
venomio said:
He has (I think I remember telling him to do the same thing a while ago). He's most likely using a Cappy that's 1010 or greater.
This is why some people need the "3 button-fix" and whatnots as well. Right now at his/their current state, only a USB Jig will work since none of the combinations work properly.
Click to expand...
Click to collapse
yeah totally.. those jigs are sweet anyway. I use it just for getting into DL mode, it's just easier and by far the quickest!
Coreym said:
did you try from powered off and usb plugged into computer-- holding down both vol buttons, while still holding both vol buttons plug usb into phone.. For some captivates this will work. It works with mine. Try that if you haven't already
Click to expand...
Click to collapse
I had 1007 phone and flashing was so fun, untill i made a mistake of using odin when my battery was low and hard bricked it....then got a refurb phone of 1008 build (current one)...did ODIn to flash and lost 3 button combo...and now i used AIO...stuck on bricked screen...tried almost everything in the forums...while i wait for my jig
No worky...
Liv33viL said:
Now turn your device on.. (Just kidding...)
Open Odin first - then - plug the cable into your device and withing a few seconds Odin should detect a com port: (any port is fine - 3, 5, 4, 2, etc...)
Click to expand...
Click to collapse
That's my problem. I can't use the three button solution to get into DL mode. I have a 1006 model.
I'm actually using Ubuntu and Windows. adb nor Odin see the device at all...it just won't drop into DL mode.
Guess I'm going to Fry's and buying a micro USB connector with all wires and making a jig.
AdamOutler said:
Noone ever needs a jig. Jigs are a money making tool.
I've flashed bad kernel after bad kernel and have never once required a jig.
Click to expand...
Click to collapse
please do not misinform people that jig is a money making tool. try this: flash a three-button disabled rom first and then unplug your usb cable while flashing ... i believe you will need a jig for sure.
you can buy one here, i believe it is cheaper & more reliable than you build one with components from Frys.
http://cgi.ebay.com/ws/eBayISAPI.dl...95025&ssPageName=STRK:MESELX:IT#ht_623wt_1139
You guys gotta quit it with the jigs. All roms... even AT&T 2.1 have 3 button.
here's a link for you to read http://forum.xda-developers.com/showthread.php?t=999302
You can fix a missing/broken rom or init. You cant fix bricked.
person1 said:
hey my phone is black and won't turn on
Click to expand...
Click to collapse
person2 said:
USE T3H J1GZ!!!11!one!****+1!!!Apostrophy!!!!
Click to expand...
Click to collapse
me said:
****SMACKS THE **** OUT OF PERSON 2****
Click to expand...
Click to collapse
or
person1 said:
Hey, I have not updated for like 2 years and I see a pc--!--phone
Click to expand...
Click to collapse
person2 said:
USE T3H J1GZ!!!11!one!****+1!!!Apostrophy!!!!
Click to expand...
Click to collapse
me said:
****SMACKS THE **** OUT OF PERSON 1****
Click to expand...
Click to collapse
AdamOutler said:
You guys gotta quit it with the jigs. All roms... even AT&T 2.1 have 3 button.
here's a link for you to read http://forum.xda-developers.com/showthread.php?t=999302
You can fix a missing/broken rom or init. You cant fix bricked.
or
Click to expand...
Click to collapse
why r u so against Jigs? they can be made in like 5 dollars man...make one yourself...I had phone with no 3 button fix..and was stuck on brick screen...Jig helped me....dont take it personally, but many times Jig can help....i agree not always but many times....
I spend around 30-50 bucks every weekend I go out to get drunk and waste my next day..8 dollars was no biggie lol
viny2cool said:
why r u so against Jigs? they can be made in like 5 dollars man...make one yourself...I had phone with no 3 button fix..and was stuck on brick screen...Jig helped me....dont take it personally, but many times Jig can help....i agree not always but many times....
I spend around 30-50 bucks every weekend I go out to get drunk and waste my next day..8 dollars was no biggie lol
Click to expand...
Click to collapse
I with you man.. they can get you out of a jam right quick. I wonder if he's tried mengbo's way to brick and gotten unbricked without a USB JIG. Because itd be interesting to know..
Sent from my SGH-I897 using XDA Premium App
Okay guys... I was running froyo with OC lag fix,
I didnt know i had to remove OCLF before upgrading thru kies...
Started the update, it was stuck on DOWNLOADING screen(on the phone) .. at 53% for 30 mins +
I removed the battery on the phone, thinking that I have the recovery mode anyway, and now I cant get into the recovery/download mode, nothing is happening, the screen doesnt even turn on.
Is my phone 100% bricked? Is there anything else i can try? If not... If i send it to samsung can they fix it?
"Take battery out for 5 mins. Then hold the 3 button combo for DOWNLOAD mode, THEN put the battery back in, STILL holding the 3 button combo."
@azzledazzle
See the Thread below, maybe it helps you too!
http://forum.xda-developers.com/showthread.php?t=1097271
SGS_elko said:
"Take battery out for 5 mins. Then hold the 3 button combo for DOWNLOAD mode, THEN put the battery back in, STILL holding the 3 button combo."
@azzledazzle
See the Thread below, maybe it helps you too!
http://forum.xda-developers.com/showthread.php?t=1097271
Click to expand...
Click to collapse
Tried this too .. not working
It's bricked because you've messed up the bootloader.
mawardi said:
It's bricked because you've messed up the bootloader.
Click to expand...
Click to collapse
If it was at 53% progress I doubt the flashing of the bootloaders had gone wrong. Probably it was in factoryfs.rfs (if it works same way as Odin).
sometimes it takes more time to enter download mode (up to 20 sec).
Sent from my GT-I9000 using Tapatalk
Thanks for the responses guys
I tried holding the buttons for upto 1 minute, still no good :/
karan_c1990 said:
Thanks for the responses guys
I tried holding the buttons for upto 1 minute, still no good :/
Click to expand...
Click to collapse
Take the battery out for 30 min then place it back and see if you can enter Download Mode, If you can't then you have a problem.
[Ramad] said:
Take the battery out for 30 min then place it back and see if you can enter Download Mode, If you can't then you have a problem.
Click to expand...
Click to collapse
After 30 mins, should I PRESS the buttons first and then insert the battry(while keeping them pressed) OR put the battery first and then press the buttons?
UPDATE : I tried it, didn't work.
I guess all left now is to give it for repairs? :/
karan_c1990 said:
After 30 mins, should I PRESS the buttons first and then insert the battry(while keeping them pressed) OR put the battery first and then press the buttons?
UPDATE : I tried it, didn't work.
I guess all left now is to give it for repairs? :/
Click to expand...
Click to collapse
No, insert the battery then try to enter Download mode.
If it does not work then send it to be repaired or try USB-JIG: http://forum.xda-developers.com/showthread.php?t=819551 I prefer the last one, cheap and fast.
in my experience.
When the screen is black and not light, I have tried everything and never managed to arrest him. Nor I worked the jig
repair center
Does the device get seen by the pc when you plug a usb cable in?
Have you tried the 301k resistor jig ?
It seems bad. I think you'll have to go to samsung. I think you can try saying, you were doing an update from kies (froyo -> gingerbread - flashes bootloaders) and then suddenly your PC turned off (power failure) . It seems that the phone can boot from USB too, so samsung can repair it without even opening it. Here on xda, there is a thread, where some guys (much more clever than me ) are trying to figure out the protocol.
Sorry for my English
dan542 said:
It seems bad. I think you'll have to go to samsung. I think you can try saying, you were doing an update from kies (froyo -> gingerbread - flashes bootloaders) and then suddenly your PC turned off (power failure) . It seems that the phone can boot from USB too, so samsung can repair it without even opening it. Here on xda, there is a thread, where some guys (much more clever than me ) are trying to figure out the protocol.
Sorry for my English
Click to expand...
Click to collapse
I recently got my wife's sgs out of a simalar situation by using ADB. And the command of "adb reboot download" if you search xda you can find a ton of info and download links for adb
Sent from my GT-I9000 using XDA Premium App
Once I saw someone that had to pull out the battery for several hours.
Maybe do that over night and then try the download mode again in the morning.
Good luck
bristolian said:
I recently got my wife's sgs out of a simalar situation by using ADB. And the command of "adb reboot download" if you search xda you can find a ton of info and download links for adb
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
He can't get to the system nor to the recovery (most likely messed bootloaders), so he can't use adb.
riff jtag can recover bootloaders' but a technition has to do it
oh yes and it cost $$$
The power button on my captivate is pretty much not working. Im not really 100% whats going on with it but as soon as i put in the battery, it automatically turns on and if i hold volume up and down it reboots. however when the phone is on pressing it does nothing, and the same for recovery.
Does anyone know of anyway to fix this?
If the buttons a goner whatre my options for working around this..
thanks in advance!
If the phone is under warranty get a replacement or get it repaired.
rkkaranrk said:
If the phone is under warranty get a replacement or get it repaired.
Click to expand...
Click to collapse
it should be under warrenty, how long is the warrenty.. a year?
anyways i need to get a jib before i try that. i cant get my phone into download mode to get back to stock :/
Yes a year.
Try holding both the volume rocks and plug in the usb= DL
Which rom are u on tGB or froyo ? both have different DL combo
rkkaranrk said:
Yes a year.
Try holding both the volume rocks and plug in the usb= DL
Which rom are u on tGB or froyo ? both have different DL combo
Click to expand...
Click to collapse
im on froyo bootloaders runnin miui
Then it has to be both volume and usb, check the usb dbug is on.
same problem
did you solve your problem, my power button just started doing the same thing, and i need to be able to get it into download mode so i can flash back to stock before going in for warranty. any options besides a jig, will a jig even solve this problem?
man mine broke too.... Luckily i might switch to sprint
Guys! i flashed to stock and my power button worked!
Aztecbandit said:
Guys! i flashed to stock and my power button worked!
Click to expand...
Click to collapse
Unfortunately, this didn't work for mine. I'm still stuck without a power button.