Database Develop

Nandroid Backup Questions

1. Can someone tell me in beginners terms how to create a nandroid backup?
2. How to restore phone using the nandroid backup that I created.
I have a rooted HTC Hero Sprint.
Thank you.

Okay, you have root. Did you set up adb or did you use Flashrec?
If you set up adb already, do this...
Go here to download RA's latest recovery image. Put it in the root directory of your sd card. Drag and drop works. Then you need to flash it.
Go to Start > Run... (Windows) and type "cmd" then hit Enter.
CD to your androidsdk\tools location. For example, my command line is gonna look like this...
>cd \ (go to the root directory, so C
>cd androidsdk\tools
Then you're in the tools folder. Open the shell (device must be connected via USB).
>adb shell
Then you get the $ prompt. Type "su" (no quotes) and hit enter. You get the pound prompt (#).
# flash_image recovery /sdcard/[name of the recovery image]
Hit enter after that command.
Type "reboot recovery" (no quotes) and hit enter. Check the Build on your recovery image should now say 1.5.2.
Should be all done after that.

Sorry. To restore, connect the phone via USB. Open the shell and type "reboot recovery"
Alternatively, shut the phone down. After it's off, hold the HOME key, then hit END and the phone should boot into recovery mode (the same green menu you performed the backup from).
Easy peazy lemon squeezy.

Thanks for your help. It is greatly appreciated.

Not a problem. Always happy to help! Did you get it working?

Instructions for creating Nandroif backup
Hi
I followed these instructions and after typing 'reboot recovery' my phone reboots and then displays an image that has a phone icon and a large yellow triangle.
At this point I am unable to do anything with the phone other than disconnect the usb cable and hold phone, end and menu buttons to reboot the phone?
I thought this was how to create a nandroid backup? I want to do thast before I try flashing the fresh rom.
Thanks.

I believe that is the stock recovery image.
Go here:
http://forum.xda-developers.com/showthread.php?t=596879
Follow the directions in the first post.

There's a nice little app called QuickBoot you can use as well to quickly reboot the phone to different stages. Normal reboot, reboot to recovery mode or reboot to bootloader mode. Need to be rooted to use this app though.

Globespy said:
Hi
I followed these instructions and after typing 'reboot recovery' my phone reboots and then displays an image that has a phone icon and a large yellow triangle.
At this point I am unable to do anything with the phone other than disconnect the usb cable and hold phone, end and menu buttons to reboot the phone?
I thought this was how to create a nandroid backup? I want to do thast before I try flashing the fresh rom.
Thanks.
Click to expand...
Click to collapse
That's how it's done. You don't have a custom recovery image yet. willowmp answered before me, but that's the stock recovery image. Go to the thread willowmp posted and that should give you all the info you need.
willowmp said:
I believe that is the stock recovery image.
Go here:
http://forum.xda-developers.com/showthread.php?t=596879
Follow the directions in the first post.
Click to expand...
Click to collapse
Thanks for catching that for me.

Help with flashing [Recovery] CDMA Sprint [07-Mar-2010] RA-heroc-v1.6.2

After getting into adb shell and following the commands it says:
"Cannot find recover partition"
What do I need to do?
thanks

Danokan said:
After getting into adb shell and following the commands it says:
"Cannot find recover partition"
What do I need to do?
thanks
Click to expand...
Click to collapse
boot your phone into recovery first, then type in the adb commands

Show me the command you typed.
Danokan said:
After getting into adb shell and following the commands it says:
"Cannot find recover partition"
What do I need to do?
thanks
Click to expand...
Click to collapse

Danokan said:
What do I need to do?
Click to expand...
Click to collapse
Download the fresh kitchen and use it...
I originally rooted with the command line but corrupted my recovery image upgrading to RA1.6.2 via adb.
The fresh kitchen was the only way out of 4 i tried that was able write a new recovery image.

I am using Fresh 2.0d
Booted into RA
Hit the MS/DOS usb command
then did the commands straight from the amon_RA recovery single post thread, i.e.:
Copy recovery-RA-heroc-v1.6.2.img to the root of your sdcard
Boot into your current custom recovery (boot while holding HOME)
Connect your Hero via usb to your pc/mac/...
adb shell
$su (not required if you have root already)
#mount -a
#flash_image recovery /sdcard/recovery-RA-heroc-v1.6.2.img

make sure you dont have any spelling errors...
flash_image recovery /sdcard/whatever_your_image_name_is.img

sladehawke said:
Download the fresh kitchen and use it...
I originally rooted with the command line but corrupted my recovery image upgrading to RA1.6.2 via adb.
The fresh kitchen was the only way out of 4 i tried that was able write a new recovery image.
Click to expand...
Click to collapse
I thought kitchen (even newest version) wouldn't work with Fresh 2.0d because it is based on 2.1 sprint.

Bump for some help.

Danokan said:
Bump for some help.
Click to expand...
Click to collapse
Try and download the pre-kitchen here
It still works for non-sprint phones.

I have a Sprint Hero thus the reason for posting on this particular forum.

[Q] Stuck at Fastboot usb screen

I installed the new zen2.2 rom today and had a working clockwork recovery. Here is where I went stupid, I downloaded the kernel update but rather than running it via update.zip I flashed it using flash_image recovery via adb shell.
Now my phone comes up to fastboot usb and never goes any further, been waiting hours! I have tried booting into fastboot/hboot and it does nothing. I have booted to hboot before successfully but now nothing.
If I run adb devices it shows no devices. If I run fastboot devices it does show my device.
Whats next?

If you cant get into fastboot and you cant get into recovery then you m ight have bricked your phone. Did you try a hard reset?

How do you do a hard reset?
Here is a little more info. I believe it does actually get to fastboot usb as it says so on the top left of the screen and I can run fastboot commands but most commands say error. If I do fastboot devices it shows the device connected.
Little more info - when I try doing a back to basics RUU update it connects, shows the rom version, starts the update and then at about 88% every time, it goes right to a error [171] usb connection error. So its communicating but never finishes. Tried with the sprint RUU stock rom, another that was built by one of the devs in the Hero community and still both do the same.

I'm pretty sure you can flash a custom recovery from fastboot. Using something like fastboot flash xxx dont quote me on this but it sounds like you have a soft brick and you just need to get a recovery back on the phone. From there you can then flash and rom back on the phone. Do some research on flash a recovery from fastboot.

ASimmons said:
I'm pretty sure you can flash a custom recovery from fastboot. Using something like fastboot flash xxx dont quote me on this but it sounds like you have a soft brick and you just need to get a recovery back on the phone. From there you can then flash and rom back on the phone. Do some research on flash a recovery from fastboot.
Click to expand...
Click to collapse
Right, I also believe that if I could get a recovery back on the phone I would be good as gold! Here is the problem though. I have tried running "fastboot flash recovery [recovery.img]" but it gives me the below error. I have tried multiple key combination's to get into hboot but nothing works. If anyone has any other key combination's I could try please let me know!
Code:
D:\android-sdk-windows\tools>fastboot flash recovery recovery.img
sending 'recovery' (3720 KB)... FAILED (remote: not allow)
finished. total time: 0.001s

1st:The ONLY time you use flash_image recovery is when you are installing a recovery console, NOT a kernel
If you notice the kernel is in a signed .zip folder. When you use flash_image command it needs to be .img file
2nd: Put the recovery image on your sdcard
Put it in the tools folder of AndroidSDK and do
Code:
adb push recovery.img /sdcard
Now type in
Code:
$ adb shell
$ su
# flash_image recovery /sdcard/recovery.img

unCoRrUpTeD said:
1st:The ONLY time you use flash_image recovery is when you are installing a recovery console, NOT a kernel
If you notice the kernel is in a signed .zip folder. When you use flash_image command it needs to be .img file
2nd: Put the recovery image on your sdcard
Put it in the tools folder of AndroidSDK and do
Code:
adb push recovery.img /sdcard
Now type in
Code:
$ adb shell
$ su
# flash_image recovery /sdcard/recovery.img
Click to expand...
Click to collapse
Yeah I think he knows now not to flash kernels... atleast I hope so. +1 for your post.

unCoRrUpTeD said:
1st:The ONLY time you use flash_image recovery is when you are installing a recovery console, NOT a kernel
If you notice the kernel is in a signed .zip folder. When you use flash_image command it needs to be .img file
2nd: Put the recovery image on your sdcard
Put it in the tools folder of AndroidSDK and do
Code:
adb push recovery.img /sdcard
Click to expand...
Click to collapse
I am fully aware of how the how-to's and what not to do's. Like I said, it was a mistake, call it a bit of anxiety due to the new 2.2 rom that I was trying to get installed. I did it too quick and without much common sense .
Now type in
Code:
$ adb shell
$ su
# flash_image recovery /sdcard/recovery.img
Click to expand...
Click to collapse
For the second part, I am unable to do anything with adb as my computer does not see the phone. When running adb devices it is not listed. Only command that sees my phone is fastboot devices, but again I am unable to run anything aside from that due to previous error.

casualonejp said:
I am fully aware of how the how-to's and what not to do's. Like I said, it was a mistake, call it a bit of anxiety due to the new 2.2 rom that I was trying to get installed. I did it too quick and without much common sense .
For the second part, I am unable to do anything with adb as my computer does not see the phone. When running adb devices it is not listed. Only command that sees my phone is fastboot devices, but again I am unable to run anything aside from that due to previous error.
Click to expand...
Click to collapse
First do you have the eng spl, does your hoot say s (on)
Have you tried that command but point it to the sdcard? Also do you have any files on your sdcard like say a recovery.img or an update zip. If you don't you might need to manually move the file to it and try some of these commands
fastboot update /sdcard/<imagepackage>.zip [-w] -w will wipe the cache and the user/data
or your previous flash recovery but with the file pointing to the file on the sdcard
edit: sorry i dont think fastboot will see the sdcard but try anyways.

ASimmons said:
First do you have the eng spl, does your hoot say s (on)
Have you tried that command but point it to the sdcard? Also do you have any files on your sdcard like say a recovery.img or an update zip. If you don't you might need to manually move the file to it and try some of these commands
fastboot update /sdcard/<imagepackage>.zip [-w] -w will wipe the cache and the user/data
or your previous flash recovery but with the file pointing to the file on the sdcard
Click to expand...
Click to collapse
I will try the fastboot command right now. I am unable to get to hboot with any of the key combination I have tried, before I was able to. Only thing that always comes up is the HTC white screen with fastboot usb at the top left. Can't see what hboot version or anything else I have due to that limitation.

casualonejp said:
I will try the fastboot command right now. I am unable to get to hboot with any of the key combination I have tried, before I was able to. Only thing that always comes up is the HTC white screen with fastboot usb at the top left. Can't see what hboot version or anything else I have due to that limitation.
Click to expand...
Click to collapse
After reading a bit you should be able to do something like i described
- copy amon_ra image to yor sd
- flash_image recovery /sdcard/name-of-recovery.img
hopefully you have a way to copy the files to your sd card like say a microsd card converter and stick it in your comp. Or I have had to use a freaking camera once for my g1 after being in a similar situation.
edit: ok so maybe you wont be able to if you spl is in s-off mode.
if you can access your card and see if you have nadroids you could also try this
fastboot flash system /path/to/nandroid/system.img
fastboot flash boot /path/to/nandroid/boot.img
fastboot flash userdata /path/to/nandroid/userdata.img
fastboot reboot
hopefully you have these backed up on your puter to.

ASimmons said:
After reading a bit you should be able to do something like i described
- copy amon_ra image to yor sd
- flash_image recovery /sdcard/name-of-recovery.img
hopefully you have a way to copy the files to your sd card like say a microsd card converter and stick it in your comp. Or I have had to use a freaking camera once for my g1 after being in a similar situation.
edit: ok so maybe you wont be able to if you spl is in s-off mode.
if you can access your card and see if you have nadroids you could also try this
fastboot flash system /path/to/nandroid/system.fimg
fastboot flash boot /path/to/nandroid/boot.img
fastboot flash userdata /path/to/nandroid/userdata.img
fastboot reboot
hopefully you have these backed up on your puter to.
Click to expand...
Click to collapse
Negative on the fastboot commands. Also did have a nandroid but on old sdcard which died. I read that I could use anothers nandroid backup but I am currently trying to find one to test.
Tried doing the RUU method with stock/custom roms and it gets as far as seeing the image but when I click on "ok" to start the recovery, it goes to "waiting on bootloader" and then at 88% it errors to a 171 error stating usb connection error.

I would do some research its my understanding that you can't be bricked since you can get into spl. You should be able to put an .img file on your sd card and flash it. Sorry I can give you any more input.

ASimmons said:
I would do some research its my understanding that you can't be bricked since you can get into spl. You should be able to put an .img file on your sd card and flash it. Sorry I can give you any more input.
Click to expand...
Click to collapse
Ya I have been researching non stop all yesterday evening and today so far all day. I just cant get it to do anything. I will keep researching though. Thanks

Did you fix this yet?

Anyone figure this out yet...I have the same issue and haven't been able to resolve it yet. Still with a brick at this point!

Hey guys,if your stuck at fastboot(As I just was tonight), try in your CMD(if running Windows) fastboot reboot-bootloader or fastboot reboot to reboot as normal,I'll try to keep you updated to get through all this. I am at a loss right now but searching for answers first before i go about asking.
Answer to MY problem(maybe not yours): OK,I have come to the conclusion here tonight that I had a soft brick. What I did was remove the battery,put the battery back in,restarted the phone normally,then I ran the HTC Sprint Hero MR 2.27.651.6 on my computer(essentially restoring back to unrooted factory settings). This worked for me. I am totally refreshed and happy that my phone is ok and all. Yes I may have to go back and re-root but this only take me bout 20 minutes most to root and re-flash a CyanMod7 Nightly Rom. Hope my info can help out somebody!

[GUIDE] How to get root on the 10.1v

BEFORE YOU BEGIN
As always, mucking with your device at this level is risky. If you follow this process, you do so entirely at your own risk. I accept no responsibility for any detrimental effects resulting from following this process, or for any problems associated with the updated files. Only if you accept these risks should you use these instructions.
PREREQUISITES
Unlocked bootloader (see my guide to do this)
Working fastboot (also see my guide )
Patience
NOTES
I developed and followed this process on Ubuntu Natty, 64bit. I see no reason why it should not work on any other platform, since the only tool used is fastboot and the syntax for fastboot is the same on any platform. if you need to know how to get fastboot working, there are already many guides for that (see my how to unlock your bootloader thread, for example)
BUTTON CONFUSION
When in landscape mode, with the camera at the top, the power button is on the left 'vertical' side of the tab. On the top is the volume rocker. In this orientation:
- The LEFT side of the volume rocker is VOLUME DOWN
- The RIGHT side of the volume rocker is VOLUME UP
This might seem obvious, but to anyone who is used to phones, this is the opposite, since they were designed to be used in Portrait mode.
PREPARE
1) With your Tab in fastboot mode (step 1 of "GETTING ROOT" below), make sure you have a working fastboot implementation:
Code:
fastboot devices
If all is well, you should see your device serial number. If there is a problem, you won't get any response.
2) Downlad View attachment skitzandroid-10-1v-root_0.2.zip and View attachment skitzandroid-stock-recovery.zip
3) Create a folder on your desktop called "root"
Code:
mkdir ~/Desktop/root
for Ubuntu or
Code:
md %userprofile%\desktop\root
for Windows
This will be referred to as the working directory throughout the rest of this guide
4) Copy skitzandroid-10-1v-root.zip to your working directory (DO NOT UNZIP!)
5) Extract the skitzandroid-recovery.img file from skitzandroid-stock-recovery.zip to your working folder. Your working folder should now have 1 IMG file and one ZIP file.
6) This was an afterthought - Make sure fastboot is somewhere in your path (ie can be executed from anywhere). To test, 'cd' to any random folder and type 'fastboot' and make sure it runs.
7) Copy the skitzandroid-10-1v-root.zip file to the root of your sdcard. You can eithe drag/drop, or run:
Code:
adb push skitzandroid-10-1v-root.zip /sdcard/
from your working directory
...now the easy part
GETTING ROOT
1) Power off your Tab and power it back on, while holding the VOLUME DOWN button.
2) When the DOWNLOAD / FASTBOOT icons appear, press VOLUME DOWN again to select FASTBOOT icon (the one with the USB logo) and press VOLUME UP to confirm selection.
3) Confirm you are now in fastboot mode and do a:
Code:
fastboot devices
If all is well, you should see your device serial number.
4) Open a terminal / CMD prompt and CD to your working folder
Code:
cd ~/Desktop/root
for Ubuntu or
Code:
cd %userprofile%\desktop\root
for Windows
5) Run the following command:
Temp Root:
Code:
fastboot boot skitzandroid-recovery.img
..and wait. It might not look like anything is happening but it is.
Permanent Root:
Code:
fastboot flash recovery skitzandroid-recovery.img
6) You should now have a recovery menu. Use the volume rocker (up/down navigates menu options) to select "Install zip from SDCARD" (or something like that - if someone can post the exact menu item wording, I will update the guide). Press (tap!) the POWER button to confirm the menu selection
7) Navigate to the root of your internal storage (/sdcard), select the skitzandroid-10-1v-root.zip file and press (tap!) the POWER button to confirm selection.
8) Once complete, use the Volume rocker to select "REBOOT" from the menu and press (tap!!!) the POWER button to confirm selection.
9) You're done! Press the thanks button on this thread to continue
TESTING
1) Once your Tab boots up, check your apps menu to confirm the existence of SuperUser app.
2) With the Tab attached to your PC via USB cable, do the following:
Code:
adb shell
su
..and watch the screen on your Tab for a SuperUser prompt. If you see this, congratulations!
If you have never rooted a phone/tablet before, go get Titanium Backup Pro and ROM Manager from the market. As soon as the custom ROMs start flowing in, you'll be all set to go.
Edit: How about thanking smaskell who was very patient and persistent in dumping the image from his Google IO 10.1 - for the good of his fellow XDA members. Without his help, this would not be possible.

Note that the above process doesn't flash the recovery, just loads it.
If you want to flash the recovery permanently, all you need to do is follow the guide above and then, in step 5, use this command instead:
Code:
fastboot flash recovery skitzandroid-recovery.img
You will then have a permanent recovery which you can get to by doing:
Code:
adb shell
su
reboot recovery
at any time.
Note that doing just
adb reboot recovery
Click to expand...
Click to collapse
...for some bizarre reason does not boot to recovery. Open up a shell first, as shown above.
I will also give you credit in the guide for having "Balls of Steel" to steal a phrase from PaulObrien
EDIT:
...and the Balls of Steel award goes to *drumroll*
Egan
...for having the balls to flash the recovery. Thanks egan. If I was in a battle, I'd definitely want you in our squad

FAQ
Does it need unlocked bootloader? Yes, see my other guide for this.
Do I need to wipe, or will it wipe my device? No and No.
Can I return my device to factory default config? Yes. This process does not flash the partition unless you follow the process in post 2 which is optional.
Changelog
0.2 - Added busybox (can be flashed over the top of 0.1 without wipe)
0.1 - Initial Relase
Factory Voda Tab Images
Recovery
Boot
System

Awesome news! Thanks to everyone who worked on this - I can't wait!

Great, great job you guys! This thing needs root so it can grow

Thanks a lot bcmobile and smaskell! Ill give it a go around launch.
Sent from my LG-P990 using XDA Premium App

Thank you guys, it's working great on my 10.1v

I'm pretty sure I know the answer to this already - but is there anyway of getting temp root on these devices so I can backup all my apps and data (properly) before unlocking / flashing recovery / rooting??

This wont make any changes to the partitions. You could undo the whole process by just deleting a few files.
The process in my second post would actually flash the image, and would be permanent if you had no 'factory' recovery image to flash back.
The 'standard' process in post 1 is normally used for testing and doesn't overwrite the recovery partition

Thanks a lot. Works like a charm
Now to make a full "original" fastboot flashable restore fileset:
Boot: dd if=/dev/block/mmcblk0p5 of=/sdcard/boot.img
System: dd if=/dev/block/mmcblk0p4 of=/sdcard/system.img
Would this be enough to have a proper "original" image? (With the small addition of root offcourse)
(Did a dd of dd if=/dev/block/mmcblk0p1 of=/sdcard/efs.img too, just to have a backup
Will see if I can make a full nandroid back-up now
Before flashing any recovery images etc..

gjroeleveld said:
Thanks a lot. Works like a charm
Now to make a full "original" fastboot flashable restore fileset:
Boot: dd if=/dev/block/mmcblk0p5 of=/sdcard/boot.img
System: dd if=/dev/block/mmcblk0p4 of=/sdcard/system.img
Would this be enough to have a proper "original" image? (With the small addition of root offcourse)
(Did a dd of dd if=/dev/block/mmcblk0p1 of=/sdcard/efs.img too, just to have a backup
Will see if I can make a full nandroid back-up now
Before flashing any recovery images etc..
Click to expand...
Click to collapse
That's all the backup I have done so I hope so
Just uploading a new version of the update zip (v0.2) which includes busybox

bcmobile said:
This wont make any changes to the partitions. You could undo the whole process by just deleting a few files.
The process in my second post would actually flash the image, and would be permanent if you had no 'factory' recovery image to flash back.
The 'standard' process in post 1 is normally used for testing and doesn't overwrite the recovery partition
Click to expand...
Click to collapse
Sorry, I realise that applying the root won't wipe anything, but unlocking the bootloader comes with a nice factory reset if I'm not mistaken..

gjroeleveld said:
Now to make a full "original" fastboot flashable restore fileset:
Boot: dd if=/dev/block/mmcblk0p5 of=/sdcard/boot.img
System: dd if=/dev/block/mmcblk0p4 of=/sdcard/system.img
Click to expand...
Click to collapse
Sorry for the ignorance, but are these fastboot or a adb commands?

Good work!
You should mention that you can't unlock and flash the Root-Update in one step.
The recovery complains then that /data/media is missing
Regards
EDIT:
black beard said:
Sorry for the ignorance, but are these fastboot or a adb commands?
Click to expand...
Click to collapse
These are adb commands you need to do with su!

black beard said:
Sorry, I realise that applying the root won't wipe anything, but unlocking the bootloader comes with a nice factory reset if I'm not mistaken..
Click to expand...
Click to collapse
That is part of the recovery image, not the unlocked bootloader.
You can always put back a stock image using fastboot which is one of the really nice things about fastboot unlocking vs bootloader exploits. "fastboot oem unlock" can then be undone by "fastboot oem lock" and nobody would know the diff.

seraphimserapis said:
Good work!
You should mention that you can't unlock and flash the Root-Update in one step.
The recovery complains then that /data/media is missing
Click to expand...
Click to collapse
Thanks!
Yeah, oem unlock doesn't actually do anything until the next boot

Egan said:
Thanks a lot bcmobile and smaskell! Ill give it a go around lunch.
Sent from my LG-P990 using XDA Premium App
Click to expand...
Click to collapse
Works like a charm! Now lets backup the original recovery and then flash the stock recovery .

Egan said:
Works like a charm! Now lets backup the original recovery and then flash the stock recovery .
Click to expand...
Click to collapse
Are you going to flash it?
You will earn the official "Balls of steel" badge

Thanks,
Also remember to enable USB debugging after you have done the unlocked bootloader, took me 5 min to to realize why adb did not want to work, 5 scary min after the reboot.

I've tried to make a proper nandroid backup but haven't been able too.
Tried with romdump 0.72 but that crashes :-(
Most tutorials use Rom Manager, but that needs some work from @koush before we can use it.
I'll google on
Sent from my GT-I9000 using XDA Premium App

no recovery, no download mode, no micro usb, but root?

hello dears,
i have very big problem with my c6603. i installed first lollipop hongkong version to my c6603. every function works but i want to install mods and other roms but; my phones usb port doesnt let the pc recognize as "phone". it is not driver problem ; it is hardware failure definetly. the port just charging my phone. And on the phone there is no recovery and download mode. But phone has root. i tried a few things to install custom recovery but couldnt be success. unlocked bootloader but no recovery as i said. i really appreciate if there is a solution. many thanks

mca1 said:
hello dears,
i have very big problem with my c6603. i installed first lollipop hongkong version to my c6603. every function works but i want to install mods and other roms but; my phones usb port doesnt let the pc recognize as "phone". it is not driver problem ; it is hardware failure definetly. the port just charging my phone. And on the phone there is no recovery and download mode. But phone has root. i tried a few things to install custom recovery but couldnt be success. unlocked bootloader but no recovery as i said. i really appreciate if there is a solution. many thanks
Click to expand...
Click to collapse
How did you install that Hong Kong lollipop?

mca1 said:
hello dears,
i have very big problem with my c6603. i installed first lollipop hongkong version to my c6603. every function works but i want to install mods and other roms but; my phones usb port doesnt let the pc recognize as "phone". it is not driver problem ; it is hardware failure definetly. the port just charging my phone. And on the phone there is no recovery and download mode. But phone has root. i tried a few things to install custom recovery but couldnt be success. unlocked bootloader but no recovery as i said. i really appreciate if there is a solution. many thanks
Click to expand...
Click to collapse
Hi there.If you have root access and unlocked bootloader,you can install TWRP even without pc connection.
first you should download a terminal emulator app from google play.
then you should download the latest version of TWRP image file from here https://dl.twrp.me/yuga/.
Place it in the root of your /sdcard folder and rename it to twrp.img
Run the following commands in terminal app
Code:
su
and then we write recovery image file to FOTA with dd command.
Code:
dd if=/sdcard/twrp.img of=/dev/block/platform/msm_sdcc.1/by-name/FOTAKernel
and it's done.
press thanks if it was helpful.

i installed hk lollipop zip from my custom twrp recovery. and when rom istall has finished ; recovery gone.

mrp1375 said:
Hi there.If you have root access and unlocked bootloader,you can install TWRP even without pc connection.
first you should download a terminal emulator app from google play.
then you should download the latest version of TWRP image file from here https://dl.twrp.me/yuga/.
Place it in the root of your /sdcard folder and rename it to twrp.img
Run the following commands in terminal app
Code:
su
and then we write recovery image file to FOTA with dd command.
Code:
dd if=/sdcard/twrp.img of=/dev/block/platform/msm_sdcc.1/by-name/FOTAKernel
and it's done.
press thanks if it was helpful.
Click to expand...
Click to collapse
thank you mrp1375 but i tried this method and when i want to go recovery phone only restarts. because phone has no stock recovery.

mca1 said:
thank you mrp1375 but i tried this method and when i want to go recovery phone only restarts. because phone has no stock recovery.
Click to expand...
Click to collapse
Below are 2 solutions to get a properly working recovery
Preperation:
1. Download Dual recovery installer: XZ-lockeddualrecovery2.8.23-RELEASE.combined.zip
2. Install NDRUtils
Next up we will test if the TWRP you installed works or not
-open NDRUtils and choose to boot into TWRP recovery.
Now unhide the result that you got to continue with the installation:
OK: I am now in TWRP
flash XZ-lockeddualrecovery2.8.23-RELEASE.combined.zip and reboot.
Everything will work normally now.
Not OK: I am not in TWRP
Reboot the phone if you have to (hold power until you feel 3 vibrations and then turn the phone back on)
You need to download this: http://nut.xperia-files.com/path/XZDualRecovery/Kernel_Builder
To get the right file make sure to selec the xperia z c6603 and select the rom version you are using, you can view what you have in settings, about phone, build number.
it will be much easier for you if you install this: X-plore File Manager The reason i recommend this application is that it automatically makes sure the file rights are correct.
Go into the settings and enable superuser +mount root mode
Now you can browse to the folder where you downloaded the zip in the left pane.
go into the zip and and then into tmp
Select the boot.img
now move to the right pane and browse to the root of your SD card like the comment above
go back to the left pane and with boot.img still checked click copy.
Now follow the original instructions mrp1375 gave you, but notice the different filename
Open terminal
Type : su
Type: dd if=/sdcard/boot.img of=/dev/block/platform/msm_sdcc.1/by-name/FOTAKernel
Now you can reboot and if it worked the phone will vibrate twice and show a green led meaning you can press the down button to enter TWRP recovery.
Go into the recovery and now flash XZ-lockeddualrecovery2.8.23-RELEASE.combined.zip so you get a proper installation
Now remember this very important fact:
Whenever you flash or wipe anything you MUST reinstall recovery and root again.
This is a failsafe strategy you can NEVER ignore becaus of your usb issues.
Keep SuperSu installer and XZ-lockeddualrecovery installer on your device at all times!

thank you

mca1 said:
thank you
Click to expand...
Click to collapse
Does that mean it worked?

tetsuo55 said:
Does that mean it worked?
Click to expand...
Click to collapse
Yes it worked, thank you much. :good:

tetsuo55 said:
Below are 2 solutions to get a properly working recovery
Next up we will test if the TWRP you installed works or not
-open NDRUtils and choose to boot into TWRP recovery.
Now unhide the result that you got to continue with the installation:
OK: I am now in TWRP
flash XZ-lockeddualrecovery2.8.23-RELEASE.combined.zip and reboot.
Everything will work normally now.
Not OK: I am not in TWRP
Reboot the phone if you have to (hold power until you feel 3 vibrations and then turn the phone back on)
You need to download this:
To get the right file make sure to selec the xperia z c6603 and select the rom version you are using, you can view what you have in settings, about phone, build number.
it will be much easier for you if you install this: The reason i recommend this application is that it automatically makes sure the file rights are correct.
Go into the settings and enable superuser +mount root mode
Now you can browse to the folder where you downloaded the zip in the left pane.
go into the zip and and then into tmp
Select the boot.img
now move to the right pane and browse to the root of your SD card like the comment above
go back to the left pane and with boot.img still checked click copy.
Now follow the original instructions mrp1375 gave you, but notice the different filename
Open terminal
Type : su
Type: dd if=/sdcard/boot.img of=/dev/block/platform/msm_sdcc.1/by-name/FOTAKernel
Now you can reboot and if it worked the phone will vibrate twice and show a green led meaning you can press the down button to enter TWRP recovery.
Go into the recovery and now flash XZ-lockeddualrecovery2.8.23-RELEASE.combined.zip so you get a proper installation
Now remember this very important fact:
Whenever you flash or wipe anything you MUST reinstall recovery and root again.
This is a failsafe strategy you can NEVER ignore becaus of your usb issues.
Keep SuperSu installer and XZ-lockeddualrecovery installer on your device at all times!
Click to expand...
Click to collapse
Hey! I have the same problem as the OP here. I followed the instructions like 5 times and still couldnt get it to work. The terminal is saying that "No space left on device" when i type "dd if=/sdcard/boot.img of=/dev/block/platform/msm_sdcc.1/by-name/FOTAKernel"
any way to fix this? Thanks!

comcastic08 said:
Hey! I have the same problem as the OP here. I followed the instructions like 5 times and still couldnt get it to work. The terminal is saying that "No space left on device" when i type "dd if=/sdcard/boot.img of=/dev/block/platform/msm_sdcc.1/by-name/FOTAKernel"
any way to fix this? Thanks!
Click to expand...
Click to collapse
That error sounds like either you dont have root or you have a typo, can you make a screenshot?

tetsuo55 said:
That error sounds like either you dont have root or you have a typo, can you make a screenshot?
Click to expand...
Click to collapse
snag. gy/gi8Ji. jpg
sorry i cant post links yet

comcastic08 said:
snag. gy/gi8Ji. jpg
sorry i cant post links yet
Click to expand...
Click to collapse
That doesnt look quite right it should look like this:
Code:
[email protected]:/ $
Then you type "su" (without the quotes) and press enter
The display then changes to:
Code:
[email protected]:/ #
Now you type "dd if=/sdcard/twrp.img of=/dev/block/platform/msm_sdcc.1/by-name/FOTAKernel" (without the quotes) and press enter
And then it should work properly.

tetsuo55 said:
That doesnt look quite right it should look like this:
Code:
[email protected]:/ $
Then you type "su" (without the quotes) and press enter
The display then changes to:
Code:
[email protected]:/ #
Now you type "dd if=/sdcard/twrp.img of=/dev/block/platform/msm_sdcc.1/by-name/FOTAKernel" (without the quotes) and press enter
And then it should work properly.
Click to expand...
Click to collapse
i typed su before that code and the same error occured sadly
why did my usb port had to break ugh

comcastic08 said:
i typed su before that code and the same error occured sadly
why did my usb port had to break ugh
Click to expand...
Click to collapse
Can I have another screenshot of that?

tetsuo55 said:
Can I have another screenshot of that?
Click to expand...
Click to collapse
snag .gy/AekHa. jpg

comcastic08 said:
snag .gy/AekHa. jpg
Click to expand...
Click to collapse
In that screenshot i see again the same mistake i mentioned before
please do this
Just type only su and enter
and then send me the screenshot of that.

tetsuo55 said:
In that screenshot i see again the same mistake i mentioned before
please do this
Just type only su and enter
and then send me the screenshot of that.
Click to expand...
Click to collapse
snag. gy/aWyCY .jpg

comcastic08 said:
snag. gy/aWyCY .jpg
Click to expand...
Click to collapse
All i can think of is that you have the wrong boot.img

tetsuo55 said:
All i can think of is that you have the wrong boot.img
Click to expand...
Click to collapse
i downloaded the one you said XZ-lockeddualrecovery2.8.23-RELEASE.combined.zip and renamed it to boot.img
even the twrp.img doesnt work ugh