Related
I've Google'd the topic and all the comes up are my own post in the Dev sections where I asked how to create/get a logcat. I can "adb logcat" to a text file, then it shows "waiting for device". Now what's the procedure or setup on the S7 end? I've turned On adb debugging options in the S7. Can/ls this done by USB? The "adb devices" command while plugged into the USB shows nothing. I can connect in Fastboot mode and "adb devices" shows nothing also. Or is more of the Android SDK package needed for this?
Did you install the adb drivers?
Sent from my Nexus 7 using Tapatalk 2
giveen said:
Did you install the adb drivers?
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
Hmm, since I've never used adb commands in the past, maybe not! Are they installed from a EXE file or in a INF fashion?
I love you man
http://forum.xda-developers.com/showthread.php?t=1484406
Download and extract, boot up device, make sure ADB is turned on device, then plug it into the computer, go to My Computer > Manage > Device Management, you should see something pop up with a yellow triangle, install the driver, it will ask you for the location point it to where you extracted the download at.
giveen said:
I love you man
http://forum.xda-developers.com/showthread.php?t=1484406
Download and extract, boot up device, make sure ADB is turned on device, then plug it into the computer, go to My Computer > Manage > Device Management, you should see something pop up with a yellow triangle, install the driver, it will ask you for the location point it to where you extracted the download at.
Click to expand...
Click to collapse
I may have never really installed ADB drivers, only Fastboot months ago. I feel like a real noobie again! Thinking that I missed the ADB drivers somehow I found that post on my own but take a look at the link. See anything missing??
wptski said:
I may have never really installed ADB drivers, only Fastboot months ago. I feel like a real noobie again! Thinking that I missed the ADB drivers somehow I found that post on my own but take a look at the link. See anything missing??
Click to expand...
Click to collapse
Um....no?
http://d-h.st/592
giveen said:
Um....no?
http://d-h.st/592
Click to expand...
Click to collapse
Yep, that's a link to the page but where's a link to actual file download? I think the third comment on the page mentions this.
If I'm not missing the driver files, I wonder if it might be that I NVflashed CM10 again but didn't allow it to reboot before restoring a TWRP backup?
All the old links to files have been changed since the DNS problems but I found a link to the old files at StreakDroid and the DNS issued is fixed. Download, unzipped, nothing looks any different to what I already have. I still tried the package anyway and it still can't find it's driver. Next I'm going to NVflash CM10 again and let it boot up fully and try it then before restoring my TWRP backup.
I had the same problem the other day when i flashed mine to CM10.
In the end the procedure which worked for me was to unplug the usb cable from my laptop.
Press the small button to hard power off the device.
Boot the device to CM10 again.
Plug the device in to a different USB port.
Then i went in to device manager and found a "dell" device which i right clicked then update drivers and pointed to the folder where i had the adb drivers downloaded to. It found them and installed the devices as an adbx device.
Then i unplugged from usb again and plugged it back in. At this point i ran the logcat command and it started logging.
jamezz98 said:
I had the same problem the other day when i flashed mine to CM10.
In the end the procedure which worked for me was to unplug the usb cable from my laptop.
Press the small button to hard power off the device.
Boot the device to CM10 again.
Plug the device in to a different USB port.
Then i went in to device manager and found a "dell" device which i right clicked then update drivers and pointed to the folder where i had the adb drivers downloaded to. It found them and installed the devices as an adbx device.
Then i unplugged from usb again and plugged it back in. At this point i ran the logcat command and it started logging.
Click to expand...
Click to collapse
I tried exactly as you outlined and it still didn't find the needed drivers. Funny as it shows a "B10B" as the unknown device and in the two WIN32 INF files that is a Dell parameter ID.
I may try my TWRP backup to ICS-B4 again before I NVflash again sometime today.
EDIT:
Restored my TWRP ICS-B4 backup but it can't find its drivers either and I tried swapping ports also. One thing though, instead of "B10B" showing up in "Other Devices", I get "Android". An NVflash is next, maybe a TWRP backup breaks ADB??
wptski said:
I tried exactly as you outlined and it still didn't find the needed drivers. Funny as it shows a "B10B" as the unknown device and in the two WIN32 INF files that is a Dell parameter ID.
I may try my TWRP backup to ICS-B4 again before I NVflash again sometime today.
EDIT:
Restored my TWRP ICS-B4 backup but it can't find its drivers either and I tried swapping ports also. One thing though, instead of "B10B" showing up in "Other Devices", I get "Android". An NVflash is next, maybe a TWRP backup breaks ADB??
Click to expand...
Click to collapse
Its because I was testing some things out in init.streak7.usb.rc
giveen said:
Its because I was testing some things out in init.streak7.usb.rc
Click to expand...
Click to collapse
Ah, what do you mean? ADB isn't going to work? It didn't work after another NVflash and allowed to boot up.
wptski said:
Ah, what do you mean? ADB isn't going to work? It didn't work after another NVflash and allowed to boot up.
Click to expand...
Click to collapse
It works just fine.
I'm stumped!
Got it! I had use the pick device option route which led to Android to ADB Interface or ADB Composite Interface. I selected the non-composite option, used those same files again and it installed the proper drivers. I have no idea and don't really care. What a PITA!
wptski said:
Got it! I had use the pick device option route which led to Android to ADB Interface or ADB Composite Interface. I selected the non-composite option, used those same files again and it installed the proper drivers. I have no idea and don't really care. What a PITA!
Click to expand...
Click to collapse
Restored my ICS-B4 backup, ran into the exact same issue and used the same solution to install the ADB drivers.
Hi,
i have the last nightly CM 10.1 directly from cyanogen site (so old bootloader)
My usb tether dont work, i try with the 4.2.2 native application and my windows 7 32bit (i have also try in a 7 64bit) install the adb interfaces, but dont install (dont prompt nothing) the network interfaces.. I try the same method on a i9000 galaxy s and it install all the device "on the air".
I try also driver adb from pdanet, tethering with clockwork app, nothing happen..
i try also this driver http://forum.xda-developers.com/showthread.php?t=1752074&highlight=tethering
With pdanet my installation breaks when try to install the app on the phone (so i think is something wronk between the adb driver and the phone)
with clockwork he find the phone but dont work
with the native android app it install the driver adb but nothing more..
Please help!
nedo85 said:
Hi,
i have the last nightly CM 10.1 directly from cyanogen site (so old bootloader)
My usb tether dont work, i try with the 4.2.2 native application and my windows 7 32bit (i have also try in a 7 64bit) install the adb interfaces, but dont install (dont prompt nothing) the network interfaces.. I try the same method on a i9000 galaxy s and it install all the device "on the air".
I try also driver adb from pdanet, tethering with clockwork app, nothing happen..
i try also this driver http://forum.xda-developers.com/showthread.php?t=1752074&highlight=tethering
With pdanet my installation breaks when try to install the app on the phone (so i think is something wronk between the adb driver and the phone)
with clockwork he find the phone but dont work
with the native android app it install the driver adb but nothing more..
Please help!
Click to expand...
Click to collapse
Hi, i finally got it:
i unistall all lg driver crap on my computer (lg suite, all the drivers ecc) I unistall also the portable device p990 in Device Manager and the adb device, i reboot my system, install last driver from lg site driver 3.8.1 and the tethering usb "jellybem" style works on the air..
Still dont work with pdanet and tethering clockwork, but i dont care XD
Bye
Last night, on TWRP I formated data on the SD card, which is why I have no OS. Now looking for how to fix this on xda/google, I get into the bootloader, have fastboot usb and try to adb shell but I keep getting the "error no device found". I already installed latest drivers from HTC on to my laptop and still nothing. Any other idea?
windows 8?
First off, make sure you have HTC Sync Manager installed because that will give you the proper drivers in order to be able to use ADB commands.
Afterwards, make sure you install Java JDK and Android SDK.
Just follow this tutorial here: http://www.howtogeek.com/125769/how-to-install-and-use-abd-the-android-debug-bridge-utility/
Follow it word for word and make sure you install JDK X86 even if you have a X64 computer. And then download SDK Manager, put it in C:/ drive, open SDK Manager, and download the necessary tools (also all in the tutorial).
I was in the same position as you just before yesterday and I followed this tutorial with success.
skinsfanbdh said:
windows 8?
Click to expand...
Click to collapse
Windows 7, and mac.
Evolancer13 said:
Windows 7, and mac.
Click to expand...
Click to collapse
try downloading all in one toolkit and try that. just make sure to read the onscreen instructions as you go through the process
TarekElsakka said:
First off, make sure you have HTC Sync Manager installed because that will give you the proper drivers in order to be able to use ADB commands.
Afterwards, make sure you install Java JDK and Android SDK.
Just follow this tutorial here: http://www.howtogeek.com/125769/how-to-install-and-use-abd-the-android-debug-bridge-utility/
Follow it word for word and make sure you install JDK X86 even if you have a X64 computer. And then download SDK Manager, put it in C:/ drive, open SDK Manager, and download the necessary tools (also all in the tutorial).
I was in the same position as you just before yesterday and I followed this tutorial with success.
Click to expand...
Click to collapse
skinsfanbdh said:
try downloading all in one toolkit and try that. just make sure to read the onscreen instructions as you go through the process
Click to expand...
Click to collapse
I'll look into both things, thanks.
EDIT: even on my mac adb does not see any devices, before when I entered ./adb devices it would show "list of devices:" and it would be blank.
Good luck, man. It's fairly easy once you read the tutorial carefully and follow all the steps to the word. After it's all done and the command prompt says Sideload 100%, boot into TWRP, tap INSTALL and then scroll down to sideload.zip and that's your ROM. Also after copying the desired ROM to platform-tools in the SDK folder, rename it to rom.zip, it seems to work 100% that way while it struggles a bit with long names.
TarekElsakka said:
Good luck, man. It's fairly easy once you read the tutorial carefully and follow all the steps to the word. After it's all done and the command prompt says Sideload 100%, boot into TWRP, tap INSTALL and then scroll down to sideload.zip and that's your ROM. Also after copying the desired ROM to platform-tools in the SDK folder, rename it to rom.zip, it seems to work 100% that way while it struggles a bit with long names.
Click to expand...
Click to collapse
Still getting the error: device not found.
I even ran the all in one tool kit and attempted the "ADB sideload a ROM" follow the steps but get an error on CMD "C:\users\(username) is not recognized as an internal or external command, operable program or batch file"
I really do not understand why adb is not working, I did s-off and supercid myself maybe less than a week ago.
Are you sure you followed all the steps in the tutorial including installing JDK, using SDK Manager to download some tools and such? And are you sure you have the proper drivers installed (e.g HTC Sync Manager)? I used to get that error before I installed it. Go to Device Manager while in ADB mode in TWRP and see if the device is recognized or if there's a yellow sign beside it indicating that there are no drivers for it.
TarekElsakka said:
Are you sure you followed all the steps in the tutorial including installing JDK, using SDK Manager to download some tools and such? And are you sure you have the proper drivers installed (e.g HTC Sync Manager)? I used to get that error before I installed it. Go to Device Manager while in ADB mode in TWRP and see if the device is recognized or if there's a yellow sign beside it indicating that there are no drivers for it.
Click to expand...
Click to collapse
It came up under Android USB Devices as My HTC. When I was following the steps on the link you provided, when I tried to update the drivers with the google usb driver wouldnt work, it would say "windows had determined the driver software for your device is up to date". When I go into My HTC properties says the driver version is 2.0.7.18.
The Google USB drivers did not work for me either, only the ones provided by HTC Sync Manager did. I have not experienced that problem, mate, so I do not know what to do at this point, I am very sorry. If you are not able to fix this, I suggest getting an OTG cable and directly loading the ROM from the PC to your SD card. I ordered one a couple of days ago and it is coming tomorrow, it's very helpful
TarekElsakka said:
The Google USB drivers did not work for me either, only the ones provided by HTC Sync Manager did. I have not experienced that problem, mate, so I do not know what to do at this point, I am very sorry. If you are not able to fix this, I suggest getting an OTG cable and directly loading the ROM from the PC to your SD card. I ordered one a couple of days ago and it is coming tomorrow, it's very helpful
Click to expand...
Click to collapse
Crap, I appreciate your help though.
EDIT: nevermind googled it, gonna pick one up. Phoneless till wednesday
I am sorry to hear that, but I suppose that's the only thing you can do at the moment. Even if somehow get ADB working, do not cancel your order because OTG cables aren't only used for mounting the device, but also for things like connecting gamepads and controllers to play games on your device.
USB 3
If you have USB3 port adb.exe wan't recognize your device.
I triend first on USB3 and after on other older computer on USB2 all was fine
Evolancer13 said:
Last night, on TWRP I formated data on the SD card, which is why I have no OS. Now looking for how to fix this on xda/google, I get into the bootloader, have fastboot usb and try to adb shell but I keep getting the "error no device found". I already installed latest drivers from HTC on to my laptop and still nothing. Any other idea?
Click to expand...
Click to collapse
You can't acces to "adb shell" without OS, there is special mode in adb named "adb sideload" , not shell !
1) Check version adb by "adb version" you need version 1.0.29 or higher
2) Check TWRP version (2.3 or higher) Go to TWRP recovery -> adb sideload
3) Connect PC to phone , at PC in device manager must be MY HTC device.
4) Type jn PC adb sideload /yourpath/yourrom.zip
tash2013 said:
You can't acces to "adb shell" without OS, there is special mode in adb named "adb sideload" , not shell !
1) Check version adb by "adb version" you need version 1.0.29 or higher
2) Check TWRP version (2.3 or higher) Go to TWRP recovery -> adb sideload
3) Connect PC to phone , at PC in device manager must be MY HTC device.
4) Type jn PC adb sideload /yourpath/yourrom.zip
Click to expand...
Click to collapse
check first with "adb devices" to see does your PC recognize your HTC
tash2013 said:
You can't acces to "adb shell" without OS, there is special mode in adb named "adb sideload" , not shell !
1) Check version adb by "adb version" you need version 1.0.29 or higher
2) Check TWRP version (2.3 or higher) Go to TWRP recovery -> adb sideload
3) Connect PC to phone , at PC in device manager must be MY HTC device.
4) Type jn PC adb sideload /yourpath/yourrom.zip
Click to expand...
Click to collapse
Tash2013 YOU ARE AMAZING! Got my One back up running!
Oh man I'm so glad it's working. I thought you already knew that it is sideload not shell lol.
Sent from my HTC One using Tapatalk 4 Beta
TarekElsakka said:
Oh man I'm so glad it's working. I thought you already knew that it is sideload not shell lol.
Sent from my HTC One using Tapatalk 4 Beta
Click to expand...
Click to collapse
If I knew I would have tried lol, and it no one said anything about sideload but oh well.
Haha! Damn. I am glad it worked out, though.
Ouya SuperScript
By TehCrucible
v0.1
INTRODUCTION
So I originally wrote this batch script to simplify and combine some of the most frequently used tweaks on the forums for my own sake, to speed up my tinkering with the Ouya but I've decided to clean it up and upload it in case anyone else wants to use it.
This script is designed as a "one-click" modification tool for a stock Ouya on the latest firmware. Please read this guide carefully.
I ACCEPT NO RESPONSIBILITY FOR ANY DAMAGE OR DATA LOSS. This script is built on the work of many others much smarter than myself and be sure to check the credits.
SO WHAT DOES IT DO?
In a nutshell:
- Install Clockworkmod Recovery
- Root Ouya
- Install Xposed Framework
- Install Google Play Store
WHAT DO I NEED?
- A Windows PC. I have included drivers for both x86 and x64.
- A Micro USB cable.
INSTALLATION OVERVIEW
1. Update your Ouya to latest stock firmware
2. Install ADB drivers
3. Run the script
4. Play some games!
There's a more detailed step-by-step in the included README.txt file.
KNOWN ISSUES
- None
CREDITS & THANKS
WonderEkin
mybook4
elmerohueso
fatesausage
DOWNLOAD
Here
Thanks a lot for this. A lo of people have been asking about an automated method to get the play store running on the OUYA...
Great works. I just think of root my ouya....
A quick update:
It's working. I'm on the latest firmaware which is JZO54L-OUYA, kernel version 3.1.10-g780994a. Completely stock, but I had already rooted my OUYA.
Anyway, I enabled the Wireless ADB which will instantly show you the ip and port, installed the drivers for 64bit. Then open CMD and type: adb connect "iport"
Then I ran the superscript and everything went fine.
Hope this helps. I didn't even have to connect with a wire.
But I guess if you wanna install the CWM recovery you should be connected with a wire...
Hello guys!
I can see the Ouya in Device list in Control panel but I can't connect it in SuperScript. Any ideas?
THX
zmelkoow said:
Hello guys!
I can see the Ouya in Device list in Control panel but I can't connect it in SuperScript. Any ideas?
THX
Click to expand...
Click to collapse
Did you install the drivers right? If yes, then you should open the folder where you extracted your files and right click while holding shift then choose open CMD here. Then write: adb devices
If your device is there, it will give you an output of the IMEI and name of device
From there, you can then tell us what the error is and hopefully we can resolve it...
zmelkoow said:
Hello guys!
I can see the Ouya in Device list in Control panel but I can't connect it in SuperScript. Any ideas?
THX
Click to expand...
Click to collapse
that happened to me yesterday, but I overcame it by have my computer plugged into the Ouya then reboot the ouya and as soon as the computer recognized it started the script and it worked.
but I have an issue too
So I can run the script everything works except getting the recovery installed. the command prompt acts like it successfully installed the recovery then the Ouya proceeds to reboot into recovery mode. When that happens I get this menu? Nothing happens when I push any buttons on my keyboard. This doesn't look like a custom recovery.
I have tried this many times, did a factory reset and started fresh however even after updating the device driver it doesnt recognize the ouya....
unkoil said:
So I can run the script everything works except getting the recovery installed. the command prompt acts like it successfully installed the recovery then the Ouya proceeds to reboot into recovery mode. When that happens I get this menu? Nothing happens when I push any buttons on my keyboard. This doesn't look like a custom recovery.
Click to expand...
Click to collapse
No it doesn't :angel:.
I think I had the recovery installed when I first got the device a long time ago and I used the manual method in this thread, but I'm not sure that it works any more. Also do you have a wired or wireless keyboard? By the way only the Bluetooth keyboard doesn't work. May be if you can install the recovery from that thread, then you can proceed to the next step. One last thing, I don't think you will need the recovery except if you want to install CM or something. Other than that, I never used it before.
TRMB said:
I have tried this many times, did a factory reset and started fresh however even after updating the device driver it doesn't recognize the ouya....
Click to expand...
Click to collapse
Which version of windows are you on? Is it Windows 8 or 8.1? Do you know how to disable driver signature verification?
Also, what does it say when you connect? Just nothing, or not recognized or what? You can try the adb wireless, go into settings/development on the ouya and activate it. Then open CMD from the extracted folder and type adb connect "ip : port" then check by typing "adb devices". Let us know what happens after that.
Which version of windows are you on? Is it Windows 8 or 8.1? Do you know how to disable driver signature verification?
Also, what does it say when you connect? Just nothing, or not recognized or what? You can try the adb wireless, go into settings/development on the ouya and activate it. Then open CMD from the extracted folder and type adb connect "ip : port" then check by typing "adb devices". Let us know what happens after that.[/QUOTE]
I have tried both from my windows 7 computer and 8.1 laptop. It showed up just as you said "missing driver", sent it to the drivers part of SS to get the driver, it said it installed but when i run the SS and hit option "1" it comes up blank...
ahmadshawki said:
No it doesn't :angel:.
I think I had the recovery installed when I first got the device a long time ago and I used the manual method in this thread, but I'm not sure that it works any more. Also do you have a wired or wireless keyboard? By the way only the Bluetooth keyboard doesn't work. May be if you can install the recovery from that thread, then you can proceed to the next step. One last thing, I don't think you will need the recovery except if you want to install CM or something. Other than that, I never used it before.
I am having the same issue but not only with this method, I have also tried to install CWM with oneclicks auto and manual method to no avail.....
any suggestions?
Click to expand...
Click to collapse
always says it installed but will only boot into stock recovery
TRMB said:
always says it installed but will only boot into stock recovery
Click to expand...
Click to collapse
I can see from your posts that you tried everything and I'm so sorry that I'm just a user and not a developer or something. May be you can try sideloading terminal and try CWM manually (if you haven't already) or sideload ROM Toolbox and try the flash recovery option.
That's all I got. But if I were you, I won't bother about the CWM at all. It's useless.
As for the Play store, try the mod that I attached in my reply and let me know if this one works for you...
Unfortunately the link is not working. Is it possible to update it, please?
What I do if my micro usb is broken :/. I only have wireless adb
.. nice .. now my ouya will run again .. thanks
I already tried everything but I can't make this work... I installed every single drive in every single way.
The best screenshot of the whole situation is on attachment. SuperScript simply doesn't recognize OUYA with default drivers, neither provided drivers (or any of its variation like "composite adb" or something like that. The "List of devices attached" always return empty, even when provided drivers installed (signature deactivated and everything else). As readme says, when SuperScript doesn't recognize, it returns "error: device not found" every time that I try something...
This SuperScript seems great to start things on my my untouched and default OUYA... but I'm honestly out of options.
vinirockman said:
I already tried everything but I can't make this work... I installed every single drive in every single way.
The best screenshot of the whole situation is on attachment. SuperScript simply doesn't recognize OUYA with default drivers, neither provided drivers (or any of its variation like "composite adb" or something like that. The "List of devices attached" always return empty, even when provided drivers installed (signature deactivated and everything else). As readme says, when SuperScript doesn't recognize, it returns "error: device not found" every time that I try something...
This SuperScript seems great to start things on my my untouched and default OUYA... but I'm honestly out of options.
Click to expand...
Click to collapse
Problem solved. It is Windows Drivers issue. S-Config did a great job explaining how you should do this HERE. I hope it helps people who got stuck. SuperScript did work, I did installed CWM but I was not able to navigate (neither thru bluetooth usb full keyboard). I'm going to try to figure out what I'm missing later. As I can see, S-Config's website is fully updated... I do highly recommend read there who is going to do anything with ouya.
vinirockman said:
Problem solved. It is Windows Drivers issue. S-Config did a great job explaining how you should do this HERE. I hope it helps people who got stuck. SuperScript did work, I did installed CWM but I was not able to navigate (neither thru bluetooth usb full keyboard). I'm going to try to figure out what I'm missing later. As I can see, S-Config's website is fully updated... I do highly recommend read there who is going to do anything with ouya.
Click to expand...
Click to collapse
.. CWM need wired usb keyboard no navigate .. i don't remember if it can do it via bluetooth
I cannot possibly figure out what the heck is causing my Windows 8.1 Installation to not detect my Nexus 6. Google comes up with TONS of results for this issue, but all troubleshooting points to what I have already done.
Plug it in, comes up as "Nexus 6" under "Other Devices" in Device Manager. With the little Yellow ! mark.
Downloaded the USB drivers from here - http://developer.android.com/sdk/win-usb.html attempted to install them and I get an error message. After selecting the folder that contains the driver.
"Windows was unable to install your Nexus 6: Windows could not find the driver software for your device. If you know the manufacturer of your device, you can visit its website and check the support section for driver software"
What I have Tried:
- Installing Drivers with USB Debugging ON and OFF
- Installing Drivers with Connection set to MTP and PTP on the phone
- Disabled Driver Signature Enforcement and attempted to install.
- Downloading Drivers a second time to ensure no corruption was in the file.
- Attempted to install via Android SDK (This appears to work per SDK software, but Device Manager shows no change, and the nexus isnt showing up in Explorer.)
- Tested Nexus on another Device. (Running Windows 7. Literally Plug and play No manual Installation needed. Worked)
I'm at total Loss here, Any other Ideas?
@morbid_bean,
Did you try the Motorola Device Manager >https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481
Thanks for the reply. Unfortunately that seems to have done nothing
I'd go w/ uninstall all other drivers first, change cables and see what happens.
Try this:
1) Download the driver from the link in your post, and unzip the files to any location;
2) Open Device Manager on your PC and turn on the option to "Show hidden devices" from the View menu;
3) Right click on EVERY item that could potentially relate to your device (e.g., adb interface, composite interface, motorola, nexus, etc.) and uninstall, including deleting the driver.
4) With USB Debugging set to OFF, plug your device into your PC. Windows should automatically install the MTP driver and It should be recognized;
5) Now turn USB Debugging ON;
6) Go back into Device Manager, right click on your device and select "Update driver software";
7) Select "Browse my computer...", NOT "Search automatically...";
8) Click "Browse", and locate the driver you downloaded in step 1.
EDIT: I don't think you have to disable Driver Signature Enforcement, but if it gives you issues, try disabling it.
morbid_bean said:
Thanks for the reply. Unfortunately that seems to have done nothing
Click to expand...
Click to collapse
This is a long shot, but you did install the Java JDK, right?
cam30era said:
This is a long shot, but you did install the Java JDK, right?
Click to expand...
Click to collapse
You do not need the JDK to install the drivers...
efrant said:
You do not need the JDK to install the drivers...
Click to expand...
Click to collapse
I understand. OP has diagnosed his problem as drivers, but if his problem is ADB not connecting to his N6, it could be the problem. As I said, it's a long shot.
OP Here with a status update.
Continued to try some other suggestions. Such as another Cable, another USB port, reboots. Hell I seriously went as far as a whole Windows 8.1 Re-install. I had some feeling that possibility because I am rooted its causing issues; so I even went as far as taking my old Nexus 4 and reverted it to 100% stock to attempt to install the drivers and then trying the nexus 6. But I got same results.
efrant said:
Try this:
1) Download the driver from the link in your post, and unzip the files to any location;
2) Open Device Manager on your PC and turn on the option to "Show hidden devices" from the View menu;
3) Right click on EVERY item that could potentially relate to your device (e.g., adb interface, composite interface, motorola, nexus, etc.);
4) With USB Debugging set to OFF, plug your device into your PC. Windows should automatically install the MTP driver and It should be recognized;
5) Now turn USB Debugging ON;
6) Go back into Device Manager, right click on your device and select "Update driver software";
7) Select "Browse my computer...", NOT "Search automatically...";
8) Click "Browse", and locate the driver you downloaded in step 1.
EDIT: I don't think you have to disable Driver Signature Enforcement, but if it gives you issues, try disabling it.
Click to expand...
Click to collapse
When I follow these steps I was successfully able to install drivers for something called "Android Composite ADB Interface"; "MTP" or "Nexus 6" was still failing. Even after switching debugging on. I still unfortunately do not see anything in Explorer that I can access the Nexus 6's files. Maybe this is an indicator that I am getting closer?
cam30era said:
This is a long shot, but you did install the Java JDK, right?
Click to expand...
Click to collapse
When I installed Android SDK, it told me I needed JDK before proceeding with the installation. So I'm pretty sure I did this.
morbid_bean said:
When I follow these steps I was successfully able to install drivers for something called "Android Composite ADB Interface"; "MTP" or "Nexus 6" was still failing. Even after switching debugging on. I still unfortunately do not see anything in Explorer that I can access the Nexus 6's files. Maybe this is an indicator that I am getting closer?
Click to expand...
Click to collapse
I just realized that the last part on my step 3 was cut off. It should read:
3) Right click on EVERY item that could potentially relate to your device (e.g., adb interface, composite interface, motorola, nexus, etc.) and uninstall, including deleting the driver.
As far as your issue, I'm pretty sure that Windos recognizes the N6 as an MTP device (assuming you have it on MTP) without any additional drivers, so I'm not sure what the problem is. My steps were to get the ADB driver installed, which seems to have worked. (ADB allows you access to your files via command line...)
Sent from my Nexus 6 using Tapatalk
FIXED IT!
I am running a version of Windows 8.1 known as Windows 8.1 Pro N Essentially this is a slightly stripped down version and does not include "Windows Media Player or other Windows Media-related technologies, such as Windows Media Center and Windows DVD Maker" I managed to get this copy really cheap.
More Info Here
So essentially I needed to download THIS Pack/Update which gave me these special features. Including the resolution of my Driver Problem. Rebooted the computer plugged in my phone and it was detected and installed drivers automatically.
Special Credit to THIS thread for helping me with the answer. I hope this can be added to any Driver Installation Guide or Sticky to assist others that may come across this problem.
Glad you got it resolved. I've never heard of Pro N. Another wrinkle in the Windows 8.1 driver issues, it seams.
Recently I have been deving on a friends nexus 6 with 5.1.1 on it all drivers are installed properly device shows in adb i even get adb root successful but it refuses to adb remount for testing purposes even on roms that have modified boot.img's with init.d in them and ro.secure=0 set and adb persistance is also set so there is no reason for it not to mount. I imagine there could be a problem with it mounting system on boot but I am new to aosp 5.1.1 roms and this solution did not work for me it tells me the windows 8.1 version I'm running is not applicable for this update? So if anyone can lend some assistance it would be much appreciated.
The Nexus 6 is VZW unlocked bootloader and rooted twrp recovery all the latest
currently any rom i try i cant mount through adb so testing for themes is impossible?
Pneuma1985 said:
Recently I have been deving on a friends nexus 6 with 5.1.1 on it all drivers are installed properly device shows in adb i even get adb root successful but it refuses to adb remount for testing purposes even on roms that have modified boot.img's with init.d in them and ro.secure=0 set and adb persistance is also set so there is no reason for it not to mount. I imagine there could be a problem with it mounting system on boot but I am new to aosp 5.1.1 roms and this solution did not work for me it tells me the windows 8.1 version I'm running is not applicable for this update? So if anyone can lend some assistance it would be much appreciated.
The Nexus 6 is VZW unlocked bootloader and rooted twrp recovery all the latest
currently any rom i try i cant mount through adb so testing for themes is impossible?
Click to expand...
Click to collapse
Have you tried this:
http://forum.xda-developers.com/showthread.php?t=2588979
Evolution_Freak said:
Have you tried this:
http://forum.xda-developers.com/showthread.php?t=2588979
Click to expand...
Click to collapse
My question is: Why would old google universal adb drivers work when everyone else says to use the new google usb drivers in tandem with the Motorola drivers for vzw? Thats the only reason i didnt use the tool is b/c its outdated?
Pneuma1985 said:
My question is: Why would old google universal adb drivers work when everyone else says to use the new google usb drivers in tandem with the Motorola drivers for vzw? Thats the only reason i didnt use the tool is b/c its outdated?
Click to expand...
Click to collapse
But alas! It does work, I've tested it myself. Also, you can install the most recent drivers optionally.
Evolution_Freak said:
But alas! It does work, I've tested it myself. Also, you can install the most recent drivers optionally.
Click to expand...
Click to collapse
I just tested it and it does not work i still get permissions denied when i try to remount it.
Pneuma1985 said:
I just tested it and it does not work i still get permissions denied when i try to remount it.
Click to expand...
Click to collapse
I don't usually recommend toolkits but you could try this:
http://forum.xda-developers.com/showthread.php?t=2947452
Evolution_Freak said:
I don't usually recommend toolkits but you could try this:
http://forum.xda-developers.com/showthread.php?t=2947452
Click to expand...
Click to collapse
Yup that didnt work either. I get su in adbshell it shows me # so there is su i just dont get why it wont mount at all or pull or push obviously cant do that if it won't mount. And no tutorial I've followed nor solution has worked thus far. As stated above that solution worked for him with windows media center or whatever but that doesnt apply to me. I've done this hundreds of times with many many many devices on windows 7 I've even done it with 3 devices on 8.1 so far no problems this is the only one to give me issues like this.
It's always a bit of messing around with it to get it to work but this is different i have spent hours going back and forth removing all drivers installing new ones using tools etc.