[Q] PC internet connection on SGS - Galaxy S I9000 Q&A, Help & Troubleshooting

Hi
I have SGS GT-I9000. I want to connect to internet using PC/laptop. How can this be done.
I tried teethring which connected to net via 3G on my handset.
A quick help is much appreciated..

Do you want to connect your pc to the internet by using 3g,
or do you want to share your computers internet to your sgs?

Either: under the settings, go to wireless and network, and in here go to Mobile AP, and follow the instructions. This sets up an adhoc wifi network that up to 5(?) devices can connect to to access the interweb through your SGS's 3G
If you want to access the internet using your laptop as a wireless router, then you need a free wireless connection (so if you have LAN cable to internet, and then a spare wireless card; or 2 wireless cards), and set up an adhoc network on your laptop that has internet connection sharing enabled, and then connect to that with your phone. This will allow the SGS to access the internet through your laptop's internet connection.

Thats from PC
thanks for the inputs.. what I wanted to know is :
1. My Laptop is connected to Internet with a LAN Cable.
I want to connect SGS to Laptop and Access Internet via Laptop.
Please refer to this question:
http://www.samsunggalaxysforum.com/tutorials/using-pc-to-connect-to-internet/
In the response they have shown an option for PC internet. Is it possible?

You have to setup your laptop wifi in accesspoint mode and connect to it from the phone.
Some links for you:
http://www.connectify.me/
http://www.maximumpc.com/article/howtos/howto_turn_your_windows_7_pc_wireless_access_point

Thanks agnivo007 but it doesnt really help.
What i want to do is connect my SGS to PC via cable and then use PC's Internet (LAN) from SGS.
This is the second half of Chillaholic's question above:
<<or do you want to share your computers internet to your sgs?>>

Related

newbie wants learn about WLAN FOR PDA2K with Laptop

First of all if some one can help by explaining “that how to connect PDA2k with Laptop by WLAN”
I want that my PDA2k can connect to laptop than I can brows internet by WLAN through laptop that is connected to internet via LAN.
It can be possible or not?
thanks in advance....
Yes it is possible.
Just how you do it depends on the the OS on the Laptop.
In general you will need two NIC (Network Interface Cards) one will need to support 802.11b and one will need to be your wired LAN.
The wire LAN should not use addresses in the range of 192.168.0.xxx
You'll need to run ICS (Internet Connection Sharing) on the laptop, or a program like it. See; http://www.practicallynetworked.com/sharing/ics/ics.htm
The wireless card will need to be configured as an Ad-Hoc network. The Laptop will need to be on and connected to the internet to browse it on the Blue Angel. The PDA will need to be configured as per this page; http://theillustratednetwork.mvps.org/WM2003/Connection_Manager/ConnectionManager.html
qureshi said:
First of all if some one can help by explaining “that how to connect PDA2k with Laptop by WLAN”
I want that my PDA2k can connect to laptop than I can brows internet by WLAN through laptop that is connected to internet via LAN.
It can be possible or not?
thanks in advance....
Click to expand...
Click to collapse
1.you need a wireless access point to connect your pda2k to wlan.
2.you don't need laptop to be using wifi, laptop should be connected to the same network though (thru wired lan also it works fine)
3.if u want to sync pda2k with yr laptop, enter the WINS server address as your laptop's ip address in yr pda2k.
4. if u can connect to wifi access point, u don't need to go thru yr laptop to connect to internet, if yr network is connected to internet (directly or thru proxy), just check the proxy settings (if any) on pda2k

Internet on Laptop via kaiser!

Hello everybody..!I'm wondering how can i make my kaiser(tytn2) phone to connect my laptop to the Internet.What i want to say is that i have a Router on my desktop pc, so i go to my laptop and connect my tytn2 with the laptop via usb(activesync).I want to make laptop to connet to the internet via tytn2!So i want tytn2 to replace a wireles card that i could connect to my laptop via WiFi with this card!Someone who know the way to do it?
It's called tethering. Be careful of usage...if you don't pay for the tethering plan, many providers will charge you for going over a predetermined amount of data transfer. Used sparingly they'll never know.
http://www.google.com/cse?cx=000825...ering&sa=Search&cof=FORID:0&ie=utf-8&oe=utf-8
I guess he wants to use Wifi, not mobile connnection. So, use the phone as a USB Wifi adapter...
I use WMWiFiRouter and it works very well. It creates a wireless access point that uses your phones data connection and requires no cords to tether. It even allows you to share your connection with more than one computer.
http://www.wmwifirouter.com/

Internet through usb cable.

Hello all.
I have googled, searched xda and tried all to get internet sharing to work, via usb, but fail all the time. It is supposed to just work but does'nt. For me.
Any help please?
regards
settings->connections->connections->advanced-select network
choose my network or whatever the native network profile is called
rather then my isp or whatever your isp profile is called
should mean that when your phone is connected to activesync
or vista's sync tool
it gets the same network as the computer you're connected to
make sure you have synced your x1 with the activesync software that comes with it then try it make sure you got signal aswell cuz it will not connect without. i use vista and it connected fine it just added another network to the ones i could connect to and obvusly it was the phone so i saved it that way when i plug it in it works straight the way. hopefully this helped
just plug it in and start internet sharing on your x1
Probably want to check your PC network status>>properties>>Advanced and check on "Allow other network users to connect...."
And go to X1 settings>connections>usb to pc and clear(if any) check mark on the 'enable adv network' if having problems.
Are you trying to connect your PC to the Internet through your phone or your phone to the internet via your PC?
doesnt necessarily belong here but since people are reading this thread - how can I do the following:
My laptop is connected to landline broadband connection via cable. Now I want to start a wireless network on my computer and let my xperia connect to. When connected to the laptop ... I want the xperia to be able to use the laptops internet access as well be able to access files that I have given network permission to e.g. movies for example.
There has got to be a way of doing this. So far all i can do is create a wireless network and let my xperia connect to it .. however nothing happens after that .. I cannot access files nor the internet on my xperia
so anybody an idea how to do this ?
thanks
I think you might need a Wireless Access Point for this, although I could be wrong. I have personally never tried it, as I haven't played around with peer to peer wireless networks.
I have an Access Point at home connected to the DSL, my laptop and my X1 both connect to it and access the internet, and that works perfectly.
Sorry I am not of much help.
just create an ad hoc connection on your pc it will appear on the network list on the xperia in the properties of the ad hoc connection tick share internet or something similar
Sharing internet connection with x1
Hello guys! I need to connect my X1 via USB with my notebbok, to share the WiFi connection. The problem is that my X1 has an IP with 192.168.1.102 Ip, (From wireless), but when I connect it via USB to my PC its tooks an IP with 162.85.2.2 Ip Address.
I configured it manually, but still wont navigate trouth internet.
So I don't know hoy to configure my connection to have the same IP range with my phone from my PC.
I searched all over XDA forums, but I didn't find anything-
Please somebody can hel me please?
Regards!
Charly!
Active sync issues the IP when connected via the usb cable, leave it as it is. (ie my home wireless network for the laptop / pc / xbox etc is 192.168.0.xxx but the phone when connected to the laptop is 169.254.2.x and active sync does the routing or something). Then do what the others said about allowing the phone ot connect to the internet via active sync and it should work.
net coonectin
hey....i using SE x1i
I need to help for to connect mobile with laptop. No one pc suite are working, when i connect via USB cable i getting error of "your USB not recognize" I tried with various PC suite but nt getting success..My Laptop OS wind8 Plz help me any one....

Connect to the internet through a laptop

Hello!
I am connecting my Kaiser to my laptop through an ad-hoc connection. I set up internet sharing on the laptop, and created an ad-hoc connection on the laptop. The Kaiser connects to it, but I can't access the internet from the Kaiser. Maybe someone knows what can be the reason?
Thanks!
You need to use the "Internet Connection Sharing" program on your phone while connected via USB with Activesync. Ad-hoc mode is used if you want to share the connection over WiFi.
I really want to share the laptop's connection through wifi.
May I suggest the program WMWifiRouter. It costs $30 or 20 Euros, but will share your connection over Wifi, USB, Bluetooth. It also performs a number of other networking related function and is very easy to use but also has many options.
WMWifiRouter is used to share the pocket pc's internet connection, and I need to share the laptop's internet connection. Then, I want to connect my pocket pc to it, and access the internet through it.

Problem with connecting to internet !

Hi all
I have a speedtouch wireless modem and for connecting to adsl i setup bridge.
so when i wanna connect to internet with pc i should connect with broadband connection.
now my question is how can i connect to internet with htc diamond ? (with these conditions)
i made a cellular connection but it didn't work.
if you got a wifi lan connect to that and your phone will be online
if you don't connect your phone to activesync and your phone will have the same network access as the computer running activesync
thats all you really need to do

Categories

Resources