Related
So far have only found instructions at to flash a 'package' of firmwares and of course dropping in a new kernel using odin but as yet havn't found out if a modem firmware can be flashed without changing the pda.
Is this possible and if so then maybe for, say closely related roms such as the various permutations of the original froyo?
If its possible then still the pda rom that remains act as if nothing is amiss the same as flashing a kernel?
And finally!
Currenly on jpy (voodoo stock)/jpy/jpy coming from unbranded froyo from my local area. Since changing I have a hunch the modem is not quite optimized for our networks and want to try the old jp5 modem with jpy pda.
Final note... Jpy seems exactly like jpo plus voodoo 5 to me except for the minor changes to ui except that battery life is TERRIBLE! When I use apps or data but the same on standbye... Hence I feel the jpy modem is not optimized.
Sent from my GT-I9000 using XDA App
I would like to do the same thing. Use a JP5 modem on a JPY rom (in my case Insanity Rom).
Where did you find the JP5 modem file? I tried a search on this forum and the best I could do was this but I can't find it on there.
I have flashed succefully a diferent version of modem on JPU earlier this month and worked well.I flashed JPU with pit and CSC file+repartition clicked,the i choose a JPA modem and flashed it seperatelly ,NO pit NO repartition.All went good.I guess its just a matter of versions,probably cant flash a modem of 2.1 versions,but a 2.2 would probably work.
Hi, the Gingerbread fever has started and everyone's bragging about it. I am on a i9000m and as some of you may have discovered this model is kind of cranky and does not flash everything like the i9000.
So could someone tell me if they have flashed their i9000m with a JVK successfully?
And if yes, have you tried reverting to stock?
Thanks!
And if you say yes...what steps did you follow to get to GB?
to get to froyo I meant...
I dont see a problem here, I have a i9000m and mine is not cranky. If my partitions get messed or something gowes wrong I usually just flash EZBASE on mine following his instructions, then I flash the JL2 found on Samfirmware without repartition checked to get back to original state.
http://forum.xda-developers.com/showthread.php?t=991792
I tried JVK but I seem to have lost the WCDMA 850 or WCDMA 1900 which ever one is GSM. I used odin and UGjl2 and put it in PDA and reflashed back to Froyo until I can get just the jl2 modem or the BMC CSC files. Don't know exactly which one I need to reenable the GSM.
Gingebread is awesome and for some reason the tv screen off animation is a must have.
I just flashed to JVK today using the firmware from samfirmware (european version) and it works fine, no issues here. Bell Galaxy S Vibrant.
Thanks Guys...So, when I flash GB with its bootloaders and then when I try to flash back to Froyo (Usually do it with JPC and then JL2) the bootloaders shouldn't be a problem???
Mauro87 said:
I just flashed to JVK today using the firmware from samfirmware (european version) and it works fine, no issues here. Bell Galaxy S Vibrant.
Click to expand...
Click to collapse
I forgot exactly what the menus say but,
can you go to "wireless and network" then mobile networks. Then there is a a place for settings that let's you pick gsm/wcdma or GSM or Wcdma.
Select GSM only and see if your phone goes to No Service.
Thanks
Yeah it goes to no service in GSM only mode, no calls or data.
Videonut said:
I tried JVK but I seem to have lost the WCDMA 850 or WCDMA 1900 which ever one is GSM. I used odin and UGjl2 and put it in PDA and reflashed back to Froyo until I can get just the jl2 modem or the BMC CSC files. Don't know exactly which one I need to reenable the GSM.
Gingebread is awesome and for some reason the tv screen off animation is a must have.
Click to expand...
Click to collapse
Try this;
http://forum.xda-developers.com/showthread.php?t=787472
droilfade said:
Thanks Guys...So, when I flash GB with its bootloaders and then when I try to flash back to Froyo (Usually do it with JPC and then JL2) the bootloaders shouldn't be a problem???
Click to expand...
Click to collapse
I would be nervous about changing the boot loader from UGJL2. This is where the I9000M internal SD corruption fixes were done from the reading I have done.
jim5055 said:
I would be nervous about changing the boot loader from UGJL2. This is where the I9000M internal SD corruption fixes were done from the reading I have done.
Click to expand...
Click to collapse
Then how do you install GB. I don't think installing without bootloaders is good too!!! I was thinking if I flash to GB and to get back to froyo if I use a three file ROM like JPC.... I will be fine, no?
Mauro87 said:
I just flashed to JVK today using the firmware from samfirmware (european version) and it works fine, no issues here. Bell Galaxy S Vibrant.
Click to expand...
Click to collapse
Have you tried reverting to stock froyo???
I reverted to stock Froyo then used odin and only installed the PDA file.
CF-Root and JVK screenoff/batt.
Looks like I have both wcdma 850 and wcdma 1900 now.
Videonut said:
I reverted to stock Froyo then used odin and only installed the PDA file.
CF-Root and JVK screenoff/batt.
Looks like I have both wcdma 850 and wcdma 1900 now.
Click to expand...
Click to collapse
So you are using jvk with the jl2 modem? Any incompatibility issues you've noticed so far? Thanks!
Sent from my GT-I9000M using XDA App
JJustin said:
So you are using jvk with the jl2 modem? Any incompatibility issues you've noticed so far? Thanks!
Click to expand...
Click to collapse
That's correct. So far no problems. The only strange thing was after the flash when rebooting it stopped at the recovery screen showing an error finding CSC information, can't remember exactly. I just selected reboot and all was good. I now have a KOR product code. If I was to flash again I think i'd flash the CSC file too.
I'd like to know if anyone has flashed all 3 files and has both wcdma 850/1900 working.
I flashed JVK the other day and so far so good. I first tried to install JVK without bootloaders but the phone would not boot after, just hung at the first Samsung screen. I flashed the bootloaders version (hesitantly since I am now on my 3rd phone), and it worked fine. Obviously I lost my 850mhz band, but got it back after flashing the JL2 modem. Knock on wood, but things are working great. I have since flashed a couple different kernel's. Used Clockwork Mod to get the CRT TV Off hack working.
I occassionaly run into a force close, but I found the same on the different versions of Froyo I have been running.
In case you are wondering. I flashed using Odin, no additional checkboxes were checked (no pit, no partition, no bootloader). After flashing I grabbed the kernel of choice and flashed it with same Odin settings. I did get error's moving from Speedmod to Ultimate Kernel. I ended up having to reflash the Ginger ROM to fix, then proceeded to install the Ultimate Kernel.
With respect to the bootloader issue for Bell devices. I do have concerns about flashing the new bootloaders, but am hoping that the steps taken to correct the Froyo JK4 debacle have been included in the new bootloader. Otherwise I may be in for another headache in a few weeks. I havent personally tried it, but going back to JL2 shouldnt be a problem. Might just have to check off the bootloader option in Odin to get back on the Bell JL2 bootloader, but not too sure.
Good luck.
Dawgplg said:
I flashed JVK the other day and so far so good. I first tried to install JVK without bootloaders but the phone would not boot after, just hung at the first Samsung screen. I flashed the bootloaders version (hesitantly since I am now on my 3rd phone), and it worked fine. Obviously I lost my 850mhz band, but got it back after flashing the JL2 modem. Knock on wood, but things are working great. I have since flashed a couple different kernel's. Used Clockwork Mod to get the CRT TV Off hack working.
I occassionaly run into a force close, but I found the same on the different versions of Froyo I have been running.
In case you are wondering. I flashed using Odin, no additional checkboxes were checked (no pit, no partition, no bootloader). After flashing I grabbed the kernel of choice and flashed it with same Odin settings. I did get error's moving from Speedmod to Ultimate Kernel. I ended up having to reflash the Ginger ROM to fix, then proceeded to install the Ultimate Kernel.
With respect to the bootloader issue for Bell devices. I do have concerns about flashing the new bootloaders, but am hoping that the steps taken to correct the Froyo JK4 debacle have been included in the new bootloader. Otherwise I may be in for another headache in a few weeks. I havent personally tried it, but going back to JL2 shouldnt be a problem. Might just have to check off the bootloader option in Odin to get back on the Bell JL2 bootloader, but not too sure.
Good luck.
Click to expand...
Click to collapse
Maybe you could try what is stated in this thread:
http://forum.xda-developers.com/showthread.php?t=997950
basicaly, you flash those modem:
Jl2 => JPD => (JQ1 was the ending there, but you should try to flash the modem from JVK)
By "tick off" you mean check it or no? Lol...
If you mean check it... I don't think its a good option. Rather why not just flash a three file ROM to get back!!
I'm running cm7 now and haven't tried going back to stock. I will give it a shot soon. The ROM is awesome but its the batt that bothers me!
Not sure if you were referring to my post but I did not tick off or check off any additional boxes when using odin. only the default boxes had a check. Repartition and Bootloaders were un-checked and I did not have to use a pit file.
In addition my modem gets 850mhz just by flashing back the JL2 modem file through Odin.
Btw, Darky RC3 ROM installed as expected. and by default ran the voodoo lagfix.
Phone is smoking fast....
I'd like to go with JVQ, but I'd also like to keep the BMC csc and JL2 or KC1 modem. From the info I found, I don't think there would be any problems with the JL2 or KC1 modem with JVQ, but I'm not so sure if the BMC csc would be possible. I think I've seen somewhere that you can't mix Froyo csc with a Gingerbread rom... Is that info correct?
If it's possible, how would be the best way to achieve this? First install the stock JVQ and JL2/KC1 modem first, and then change the CSC with one of the apps available on the Market?
Im re-flashing JVQ+JL2 modem right now. I am going to try and change back to BMC later today. I will let you know if it works!
I don't even know what BMC is....
However I'm on JVQ with KC1 modem, and semaphore kernel. Zero issues. It's running great!
davanw said:
I don't even know what BMC is....
Click to expand...
Click to collapse
BMC = Bell Mobility Canada, it is the product code. If you load up Samsung Apps, you will get the Korean apps, as your phone has a product code (CSC) of KOR.
never worried about the csc but I have not been able to add bmc to any of the later 2.3 firmwares (jvk, jvo, jvp or jvr) which I found all need the matching csc to install corectly.
For me, jvr is so much better than any other stock firmware that losing bmc was a small issue.
Using the kc1 modem has not been an issue with any of the firmwares and it is still the best modem for Bell users until there is an official update which has been promised for "mid-summer' but who knows.
Thanks for your help guys... That confirms what I thought... I think I'll go for it anyway
...
Sent from my GT-I9000M using Tapatalk
Just a small update...
KG3 stock firmware has just been released. I used Odin to flash the CSC from this KG3 firmware and use "Boite à outils SGS" from the market to change the CSC from KOR to BMC... All is well. I also just flashed the modem from KG3. Let's see how this goes. I'm on Darky's XXJVR BASE R2 for PDA and I'm not too impressed with it. Even after factory reset, cache and Dalvik cache reset, i'm having issues with stock Browser. Loading pages is very fast, but zooming and moving around a page is laggy as hell for some reasons... I might try stock JVR PDA instead...
just get teh browser fix??
I have an I9000M from Bell (Running on Telus) unlocked but not rooted.
I have had non-existent GPS since Kies updated me to KG3. I tried a couple of things but nothing helps.
For the hell of it, I flashed JVR (stock) that I got from samfirmware.com. The GPS was almost instant, showing 9 sats in about 10 seconds.
There is a Swisscom screen that appears when booting, so obviously this ROM is the Swiss version. Is there a problem with me using this Swiss stock ROM on Telus?
Can I go back to KG3 and still flsah something from JVR to get the same great GPS performance?
I went back to KG3 and flashed the JVR modem without any luck.
Is there a combination I can do ?
Thanks,
Ian
w98seeng said:
I have an I9000M from Bell (Running on Telus) unlocked but not rooted.
I have had non-existent GPS since Kies updated me to KG3. I tried a couple of things but nothing helps.
For the hell of it, I flashed JVR (stock) that I got from samfirmware.com. The GPS was almost instant, showing 9 sats in about 10 seconds.
There is a Swisscom screen that appears when booting, so obviously this ROM is the Swiss version. Is there a problem with me using this Swiss stock ROM on Telus?
Can I go back to KG3 and still flsah something from JVR to get the same great GPS performance?
I went back to KG3 and flashed the JVR modem without any luck.
Is there a combination I can do ?
Thanks,
Ian
Click to expand...
Click to collapse
If the Swiss JVR is working for you then use that only issue you may have is some Market apps not being available to you CSC specific ones mainly, if you do run into that problem then you can always try Market enabler or Root Toolbox
I havent been on a Bell ROM since I bought the phone and never had issues with running EU firmwares
Also it seems weird that you being on KG3 with the JVR modem doesnt work, you could try just for ****s and giggles JVR with the KG3 CSC and see if that does anything, if it doesnt one other option would be to use KG3 with the KC1 modem, just do a search on here for CWM modems
DT3CH; said:
If the Swiss JVR is working for you then use that only issue you may have is some Market apps not being available to you CSC specific ones mainly, if you do run into that problem then you can always try Market enabler or Root Toolbox
I havent been on a Bell ROM since I bought the phone and never had issues with running EU firmwares
Click to expand...
Click to collapse
Thanks for this. Since the Bell ROM's never did much for me (Or the phone) I have wondered about using EU ROMs (or others) for a long while. I probably will try JVR for a bit and see how it works.
Many Thanks,
Ian
w98seeng said:
Thanks for this. Since the Bell ROM's never did much for me (Or the phone) I have wondered about using EU ROMs (or others) for a long while. I probably will try JVR for a bit and see how it works.
Many Thanks,
Ian
Click to expand...
Click to collapse
you can flash jvr (pda) with kg3 (modem) and kg3 (csc) that way you get the gps, the 850 band and the correct csc stuff
If I have KG3 already installed, (All 3 portions), will just installing the JVR PDA portion work keeping the KG3 modem and KG3 CSC intact?
Or do I have to do it the other way around?
w98seeng said:
Thanks for this. Since the Bell ROM's never did much for me (Or the phone) I have wondered about using EU ROMs (or others) for a long while. I probably will try JVR for a bit and see how it works.
Many Thanks,
Ian
Click to expand...
Click to collapse
No prob, if you dont like the standard Bell ROM, you could always try out different custom ROMs too, GB and CM ones
greeced said:
If I have KG3 already installed, (All 3 portions), will just installing the JVR PDA portion work keeping the KG3 modem and KG3 CSC intact?
Or do I have to do it the other way around?
Click to expand...
Click to collapse
That should work, if you experience any problems like a boot loop (unlikely)
Just do as stated above by shedden, flash JVR PDA, KG3 modem and CSC
FYI if you do NOT use Bell's CSC it WON'T re-install the bell bloatware
dlockhart said:
FYI if you do NOT use Bell's CSC it WON'T re-install the bell bloatware
Click to expand...
Click to collapse
I don't really care about Bell's Bloatware.. my whole thing is being able to download from the market as I usually did.
For instance.. When I tried JVR before KG3 was out, I couldn't download "Bell Self Serve" from the market, says it wasn't available.
I wonder if those of you who have done the JVR PDA / KG3 Modem / KG3 CSC Can actually download that piece of software, or will it still not allow you to.
lgsshedden said:
you can flash jvr (pda) with kg3 (modem) and kg3 (csc) that way you get the gps, the 850 band and the correct csc stuff
Click to expand...
Click to collapse
Would you have seperate links to those 3 files ?
They are posted in the thread by ramad use the stock odex ones.
Sent from my GT-I9000 using XDA App
I'm a dev and I've spent 2 hours reading and trying...
Can I flash KC1 or KG3 from ClockworkMod 4 or 5 ? I'm on Linux and I avoid ODIN if at all possible.
I flash back and forth between CM7 nightlies and various MIUI ROMs. I need my SIM to work for s/w testing, for data and voice.
This i9000m phone is pretty new, was a Virgin Mobile model (pretty much Bell) and I use a SIM from an MVNO of Bell. (President's Choice.) With the stock ROM this worked without unlocking.
I tried some ZIP files for these basebands, meant for CWM3. I also tried replacing the modem.bin in the latest CM7 nightly. Nothing I do makes Settings -> About show a baseband other than "I9000XXJVK".
When I do a search for networks, it eventually shows me: 302610, 30220 and "CAN Rogers Wireless Inc." and I have emergency service I believe.
At the dial keypad I can't make "*#1234#" or "*#0011#" do anything.
Thanks !
No thoughts ?
I managed to get KC1 and KG3 loaded fine when installed along with Darky ROM using heimdall.
But when I install CM nightly, it overwrites the modem.bin.
And when I then use heimdall to flash the KC1 or KG3, CM says "Baseband version Unknown".
Same when I flash a modified CM zip with a new updater.sh and a removed modem.bin over Darky.
EDIT: Solved. I guess I need CM7/MIUI specific modems from this thread: http://forum.xda-developers.com/showthread.php?t=1158783
You're right buddy, that's exactly what i was going to say after reading your post.
Sent from my GT-I9000
SiCRider said:
You're right buddy, that's exactly what i was going to say after reading your post.
Sent from my GT-I9000
Click to expand...
Click to collapse
Well, thanks...
Now if I can just figure out how to enable the "SIM Toolkit" app...