[Q] Why can't my phone make calls or text??? - Galaxy S I9000 Q&A, Help & Troubleshooting

My galaxy s i9000 sometimes let me send messages and other times it doesn't, (especially when i really need it). I also sometimes can't make calls on it, i don't know if it's a problem with the phone.
I have flashed the phone like 3 times if that matters. Does anyone have this problem and what did you do to solve it.
When the phone can't call i don't get 3g symbol on the top, and also this is making internet on my phone not able to work!
Oh and by the way, the phone did not have this problem before. I am on the froyo xwjs5 firmware by using odin.
I hope someone can help.
Thanks for reading.

Change the firmware, I suggest you do download the Gingerbread one

might need a better modem

Install the correct firmware for your phone and network .
jje

Hi what do you mean by correct firmware?

As an example Bell mobile's firmware is I9000UGKC1, so when I have problems that is the firmware I flash. So whoever your provider is, they have a firmware probably available at samfirmware.com.. download, flash and enjoy.

Related

csc unknown??

I had loads of problems installing jpu and basically had to give up on using odin . I eventualy got it installed bit by bit and its working fine. My only problem is the Csc shows as unknown, will this cause any problems or do i not need to worry .
do you still have a network signal? if yes, then csc unknow should not really be an issue and more of a nagging annoyance of you seeing it as "unknown".
you can get your CSC back though BUT this will do a factory reset of your phone meaning all the apps you have installed will be removed so please back them up first.
all the necessary details you need are in the first few pages of this thread:
http://forum.xda-developers.com/showthread.php?t=787163
The automatic method will work for you. I am on JPU as well and it worked on me
Yea I have a signal and the phone is the best its been since buying it. The more I think about the trouble I had putting jpu onto the phone I'm just going to leave it until the next MAJOR update is available.
Thanks for the reply.

[Q] Emergency Calls Only after CM install?

I've spent the last few days trying to figure this out without any luck. I have GT-S5830D (Canadian Koodo version) on stock firmware TLKI4, unlocked with SpeakOut sim (which operates on Rogers network).
Android Version: 2.3.4
Baseband Version: S5830DTLKI4
Kernel Version: 2.6.35.7-perf-CL568978 [email protected] #1
Build Number: GINGERBREAD.DTLKI4
PDA: S5830DTLKI4
PHONE: S5830DTLKI4
CSC: S5830DTLSKI4
In this stock firmware, I have no issues at all. Everything works fine, can place calls, WIFI, GPS, data all works. If I flash a new rom to the phone, I can see the networks still show up with signal strength showing okay, but the phone will not place calls. Just says Emergency Calls Only.
I've been reading about everything I can about this phone, and I just can't figure out what the problem is. I have flashed the modem with DDKQ7 and I was able to again place calls, however with this modem firmware, the connection was very unstable and would drop frequently.
Is there an issue with directly updating the stock rom to CM7 or CM9 that would cause problems with this baseband? I was under the impression that baseband wasn't really important. Interestingly enough, I have another phone that is the same make and model and is not experiencing this problem. I feel there must be something I am missing, if anyone can shed some light on this, I would appreciate it.
Thank you.
I have a feeling that I may be the only person that has experienced this issue. Continuing to search the internet for other answers, I've discovered that the baseband is the cause of this issue, but I still don't quite understands how it relates. My other phone is on the stock firmware (TLKI4) and is running CM7 without issue, on the same network even.
Do the APN settings have effect on voice calls too? Or is it strictly for data?
Also, I read a post on here that sounded like there was a limit to how many times you can perform a complete flash with Odin? Is that true? I'd love to keep experimenting, but each time to roll back the stock firmware, I need to use Odin and I'm hesitant due to the thought that will eventually brick the phone.
Thanks again.
tried to flash cm7 again??
Yes. I have installed cm-7.2.0-cooper.zip as well as some of the nightly's and still only get emergency calls only. I have another phone, exactly the same setup, and it works without issue. I even tryed GalaxyICS-latest and the same problem.
Now I did install a different modem firmware, and performed the upgrade and I don't have the issue anymore, however I have other issues, dropped service, 3g doesn't work properly, wifi and mobile data won't switch, gps is has extremely long lock time if it locks at all.
Does anyone here have the D version of this phone from Koodo? Which modem firmwares are you using? Anyone specifically using the phone on SpeakOut? Any hints would be helpful because I'm completely at a loss, will just have to keep it stock until I can figure it out.
I had the same problem as you, don't worry though because there is a solution. The Koodo Samsung Galaxy Ace only receives a signal when using the original Koodo baseband. (Basebands have to do with wireless signal, sometimes referred to as modems.) The good thing for you is that you can use any ROM or firmware you like, as long as after installing it you flash the original Koodo baseband (S5830DTLKI4) using Odin. I found a download link for the baseband in this thread: http://forum.xda-developers.com/showthread.php?t=1381595
After downloading, (I'm assuming you know how to use Odin, if not you can find a guide easily) open Odin, and in the "Phone" section browse to the file and select it. (You will have to extract the ZIP) Then press start and wait until it is finished downloading and that should do the trick. If you need any more help post back because I know what a pain it is to try and get this particular phone rooted and install a custom ROM.
ALSO MAKE SURE TO BACKUP IN CLOCKWORK MANAGER BEFORE FLASHING THIS
cause you never know what can happen.
If I flash CM7, it still shows my baseband being the same. It doesn't appear to have been changed. So what I need to do is flash CM7 and then just reflash the baseband with Odin and it should work? Even though the baseband shows the same? I'll give it a shot and let you know how it works out, but does anyone know why this would be required, to have to reflash the baseband even though it was never changed?
Is your current baseband S5830DTLKI4? Because in my experience that's the only way I could get service unless I was on the Koodo stock ROM.
Sent from my GT-S5830 using XDA
Yes, that is the firmware that I'm on. That firmware was installed with the stock rom that the phone came with and I have not changed it. Although I have changed it before, it fixed the issue with getting 'emergency calls only' in CM7 but the service was so flaky it wasn't worth keeping as a solution. If I leave the firmware from stock DTLKI4 and flash CM7 over it, I end up getting stuck with emergency calls only problem.
Is the current official CM7 not compatible with DTLKI4 firmware? Could that be the problem I'm having? I'm still really confused why this isn't working, but I will try to install CM7 again, and then use Odin to flash the DTLKI4 on top to see if the install is causing any issue with it. It doesn't really make sense.
Alright, interestingly enough, I just flashed it again and all is working as expected. I've flashed this phone about 10 times, using the same files and it would not work.
This time however, what I did differently is not root the phone. I've been using the universal_gb_root_v20.zip to root the phone previously, but I found that rooting before installing CM is waste of time as root is enabled in the CM7 rom already.
Also, when I flashed the stock rom with Odin, it usually used selected the KDO CSC automatically, last time I flashed it came up with TLS CSC and had the Telus branding. I don't know if that made any difference. All I know is that it worked and I am able to make calls and use data without any problems.
Thank you Dynamic_Apple, although your recommendation was not required, it did give me the motivation to try again and that was enough to get it working. I've never had so much difficulty modding a phone in my life, especially a model that I have messed with before.
Glad I was able to help, I had just as much trouble getting mine modded too, it makes me jealous of all the generic Galaxy Ace owners, but it's good to know that you can actually get past Koodo's sneaky limitations.

No phone signal

Hey everyone i have had massive problems with the IMEI on my i9000 finally managed to flash back to stock ROM but im still getting no signal. The IMEI is fine and i have a backup of the efs folder saved. What files do i need in this folder as i will delete all of the contents then start again.
Thanks
If your still getting no signal but are not getting "No Service" then either the modem you flashed in the stock ROM is utter pants for specific handset so trying flashing a different modem or a different ROM altogether :/
But if a different modem or ROM doesn't fix it then you have a antenna problem... sorry bud
Hey mate,
Cheers for the reply. I will try a new ROM can you recommend any small ROM's that will work on my device? I don't know a great deal abour ROM's and flashing in general tbh.
I need to finish my guides badly! Then I'd just be able to point you towards them :/
But since their not... cause I've been lazy, please head over to SamMobile/ and create an account if you haven't already done and download the correct firmware for you i9000.
Getting the right firmware is difficult, it's even more difficult since I'm guessing you don't know the PDA build from what the phone was running originally... for example by phone when I got it was running I9000BVJV7 which is actually Android 2.3.3 for the UK and sim locked to Orange.
When you take into account that the Android version, the country and the carrier have an effect on the specific firmwares for two (on the face) identical phones you can begin to see how many millions of different firmwares there are out there just for one phone...
So just try your best and read all the helpful info on SamMobile. If you get really really stuck or if something nasty happens to the phone while flashing either come back to this thread or PM me and I will talk you through a recovery kit that will hopefully restore the phone to a stock ROM (but not official stock ROM).
Since you're new to flashing please be reminded flashing can completely kill a phone to the point of no return, having said that I must have flashed a million times in both ClockworkMod and Odin but that doesn't mean death can't happen at any time.
Thanks mate i really am grateful for the help. I will give that a go and see what i can find.
Downloaded all of the vodaphone rom's and all of the orange roms. The device was used on vodaphone and im still getting the same error :/ any more ideas?

[Q] data download problem

i got galaxy note N7000B from vodafone australia. i cannot download anything more than 7mb unless i am on stock vodafone rom which is LRI.
I tried many another stock as well as custom rom but same prob every time. can anyone please let me know why it is happening and what could be it solution. thanks a lot in advance
i noticed that you sayed N7000(B), this is the first time i hear about this galaxy note, is it the same as N7000 but with nfc maybe?
have you tried to download a file bigger than a 7mb on another wifi router, try using 3g if you have, and maybe if your phone is locked it will prevent you from doing something unless you are in you carrier's softare so try unlocking your phone.
if none of these helped you, wait for experts to answer you
thanks for reply
yes i got N7000(B). itz vodafone australian handset. and it also do not have NFC. yes it was locked on network but i did unlocked it.
i can download any file size via wifi but not through 3g or H.
darkelfa2 said:
i noticed that you sayed N7000(B), this is the first time i hear about this galaxy note, is it the same as N7000 but with nfc maybe?
have you tried to download a file bigger than a 7mb on another wifi router, try using 3g if you have, and maybe if your phone is locked it will prevent you from doing something unless you are in you carrier's softare so try unlocking your phone.
if none of these helped you, wait for experts to answer you
Click to expand...
Click to collapse
it may be an issue with ur APN settings. may be find the details re enter the setting and try again.
yes i did try that but no result.
one thing if i download any custom rom over stock rom without full wipe then i can download more than 7mb over 3g but this thing give me some troubles as full wipe is recommended. thanks.
nokiamodeln91 said:
it may be an issue with ur APN settings. may be find the details re enter the setting and try again.
Click to expand...
Click to collapse

[Q] 3G won't turn on ...?

I rooted my phone yesterday and when my phone wouldn't boot up the rom I installed, I tried to reinstall the backup I had.
After that didn't work, I used odin to flash a stock ROMI downloaded on the internet and it is working now.
The stock rom I downloaded upgraded my phone from android 2.3.3 to 2.3.6. I don't know if that would make a difference.
So after this was all done, I realised I can't connect to 3g or any mobile network.
Why is this?
How can I fix it?
I live in Ireland so maybe it has something to do with the Stock ROM being from a different country?
Sorry, I am a noob at this kind of thing.
If anyone could help me, I would really appreciate it.
Thanks in advance.
Spaffle said:
I rooted my phone yesterday and when my phone wouldn't boot up the rom I installed, I tried to reinstall the backup I had.
After that didn't work, I used odin to flash a stock ROMI downloaded on the internet and it is working now.
The stock rom I downloaded upgraded my phone from android 2.3.3 to 2.3.6. I don't know if that would make a difference.
So after this was all done, I realised I can't connect to 3g or any mobile network.
Why is this?
How can I fix it?
I live in Ireland so maybe it has something to do with the Stock ROM being from a different country?
Sorry, I am a noob at this kind of thing.
If anyone could help me, I would really appreciate it.
Thanks in advance.
Click to expand...
Click to collapse
Hey,
The CSC (what country the rom is from) doesn't matter, I'm running a stock 2.3.6 rom from the UK even though I'm in New Zealand
Try first going into
Settings -> About Phone -> Status.
Scroll until you see IMEI. If this is odd (maybe XXs in the number code or its different), then that explains why your phone can't connect to any network. Maybe from a bad flash- there a tutorials on these forums on how to recover your IMEI.
Also in this menu check your signal status- whether it says "Connected" or "Disconnected" in Network Status or whatever.
Alternatively, go to
Settings -> Wireless and Network -> Mobile Networks -> Access Point Names.
In here are your APNs- the network "gateways" that your phone connects to for 3G and so on. Make sure these are configured correctly- if not, your provider's website should tell you how to set these up nicely.
Hope I helped
Sent from my GT-I9000

Categories

Resources