Hello.
I'll get straight to the facts.
I had my phone rooted with Odinv3 using "busybox" (is all i can see on my downloads).
I then went to update to Gingerbread today, but didn't realise I had to un-root the phone!
So this made the phone keep refreshing the samsung galaxy S screen.
I then went to reboot to stock using this thread. Said it passed etc.
Now my phone is completely dead. It won't turn on. Nothing at all when i get it into download mode. No lights turn on. Odin *does* recognise it when I plug it in, the yellow box lights up.
The computer makes a noise to recognise that somethings been plugged in.
But alas nothing on the phone. I've left the battery out and tried it in but nothing.
What can I do please?! I am stuck here. And fear i just have wasted a great sum of money...
Will I be able to take it back on warranty? I haven't had it long, 3 months or so. Would they recognise it has been rooted despite it being put back to stock software.
Thanks. Daniel
You are a bit unclear, can you get download mode with 3 button combo?
Sent from my GT-I9000
tried many times to remove and replace the battery worked for me
sorry for the google translation
I managed to get into download mode by doing a 3 button combo earlier, can't remember what it was but I had to hold three buttons *THEN* fit my battery. THen it went into download mode. I can't remember which combo it was though as i've tried loads before and they didn't work!
It won't do anything now though.
Could i have booted it with a wrong ROM and that's why it won't load?
How come Odin picks it up and it goes through that passing etc?
THis si so annoying.
Volume down/power/home hold til galaxy s logo then release a yellow logo should appear
Sent from my GT-I9000
Sorry for opening an old thread. But i have aproximately the same problem with one exception:
Odin won't regognize my phone.
I was just in the process of installing this rom:
http://forum.xda-developers.com/showthread.php?t=1136449
It got to the first step: "DO NOT POWER OFF DEVICE!!".. and then nothing. Sat there for 15 minutes untill i unplugged it.
shut down the phone using the power button, but now.. its completely dead.
This was offcourse before I realized i had just tried to install a ROM for SGS.. not SGSII.
So.
Odin doesnt recognize the phone.
The phone won't turn on, no matter what I do.
Nothing happens when I try to charge the phone.
I've tried pulling the battery several times, but its just .. dead.
However, when I plug in the battery, the phone seems to get hot. Not very hot, but just slightly above 25 degrees (aprox).
I'm afraid i've f*cked up big time, and have to send it in for a repair..
Anyone have a tip of what I can do ?
(Yes, the battery is charged - not empty).
Have you tried going into download mode again? does the screen power up at all?
My advice is try to leave the battery out for 15-30 minutes, then try getting into Download mode again, with the USB cable already plugged in and ODIN running on your machine.
See if ODIN can detect it and work from there... May be better than nothing. Hope this helps.
kragebein said:
Sorry for opening an old thread. But i have aproximately the same problem with one exception:
Odin won't regognize my phone.
I was just in the process of installing this rom:
http://forum.xda-developers.com/showthread.php?t=1136449
It got to the first step: "DO NOT POWER OFF DEVICE!!".. and then nothing. Sat there for 15 minutes untill i unplugged it.
shut down the phone using the power button, but now.. its completely dead.
I've tried pulling the battery several times, but its just .. dead.
However, when I plug in the battery, the phone seems to get hot. Not very hot, but just slightly above 25 degrees (aprox).
I'm afraid i've f*cked up big time, and have to send it in for a repair..
Anyone have a tip of what I can do ?
(Yes, the battery is charged - not empty).
Click to expand...
Click to collapse
Did you know how to flashing the rom (via CWM) ? You have to notice your battery percentage first.
What exactly were you flashing? CF-root? where did you get it from?
I had the battery out through the night and tried again this morning.. didnt work..
It SEEMS to be completely dead.. (with exception from that the cpu gets hot when battery is plugged in.. )
I tried flashing this:
http://www.multiupload.com/6QNW8P7DTY
I came as far as "Setting PIT file.." "DO NOT TURN OFF" in odin, and then everything stopped.
The battery was at 70% when i started the process.
The phone have only been on for about 20 minutes since.
Related
I was doing an Odin One Click restore to return to stock
Odin got stuck for some reason. I waited nearly 45 minutes before pulling the battery and attempting to start over.
Upon pulling the battery, the phone went off, as expected. removed Sim, SD card, replaced battery, replaced battery cover, etc etc.
The phone is 100% unresponsive.
1: Removing and replacing battery - no effect
2: VolUp + VolDn + Power - no effect
3: Plugging into any one of the 5 USB ports on the computer - no effect
4: Plugging directly into the wall - no effect
Nothing I've tried or read has given any solution to even get the phone to come on.
Last ditch effort, going to leave the battery out for an hour or so, and failing that, going to leave everything plugged in for an hour or so.
The battery on the phone had nearly 95% when I started this endeavor.
Does anyone have any hints or suggestions as to other things to try?
Thanks.
I had that happen last night. Got stuck sending "factory.rfs" or something like that.
Anyway, plug your phone to the wall for a few minutes. Maybe an hour. Then open Odin, hold Vol-UP and Vol-DOWN (dont push power), and plug the device to the computer. It should boot to Download mode.
Now, I used the version of Odin that allows you to select the firmware -- there's another that comes with JF6 preloaded. I installed JH3. Also, when I selected the firmware with the "Phone" section and flashed, it did not work (FAIL). Later I tried the "PDA" section and it did.
Let me know how that goes.
EDIT: Plugging to the wall, the screen will not turn on. But the back will get warmer. Trust me, it is charging. My battery was full after the flash.
del
Thanks for the quick response.
I figured at this point, I couldn't do anymore harm that good. Worst case, I buy a new one.
So, I started tinkering with various key combination... Lo and behold, one particular set gave me the infamous "orange dump".
From there, and a bit of searching (i had remembered seeing the bit about the orange hex dump somewhere), I found the same solution you just provided.
Worked, phone is stock and functional.
Kudos.
Dave
i too was trying to install vodoo and after installing it my phone wont turn on it just keep on flashing atnt screen and next screen i see is samsung and thts keep on repeating no luck my phone wont turn on please help me am badly stuck.
thaank you.
IF you are able to get your phone to the point of seeing the att screen then you should be able to hold down the vol up+down buttons while also holding the power button...Just to be safe, hold it till the att screen flashes twice. Then release and you should be taken to the recovery mode. If not, Try the same steps again plugging in the usb while the att screen is present. Repeat as necessary. Good luck.
Yesterday, I was flashing back to the JH6 again. It stuck at factory.rfs for a long time. Then, I tried to restart. After phone is off, it couldn't turn on any more. No matter, press vol down + power or press vol up and down then plug in usb with ODIN on. Or just press power button. I've tried the whole day even try to put on wall charger overnight. There is no battery screen during charge just for the reference.
It seems there is no way to bring it back other than jtag? anyone has any experience about this dead phone and bring it back to life?
Thanks.
Have you tried another battery? Just to make sure it didn't take a dump. It has been reported by very few that has happened.
Same thing happened to me it froze during the Factory.rfs so I turned it off and the phone wouldn't turn back on. I panicked and found somewhere else on these forums although I cannot find the thread again. What I did I just plugged my phone into the wall charger for a couple minutes with the battery. Then I unplugged it and took the battery out for a another minute then put the battery in and try to turn it on while holding the volume - or + I forgot, and if you start to see Orange Text being dumped to your screen chances are you can force it back into Download Mode. Just keep trying different button combos to get it working, unless I was extremely lucky but I do not think these phones can be bricked so easily.
Thanks. I did see the thread you mentioned and tried every way I can but not available. Fortunately, I got ATT warranty center to send me a replacement. However, the only catch is that I'm not sure if it's unlockable now since it might come with JH7. If that's the case, I'm gonna sell it and get other phone.
samsung captivate brick
i have the same problem... im running windows 7 x64(64 bit) and i was updating my phone to the rooted 2.2 froyo update via odin with the "I897UCJI6-OCD-REV02-Low-designgears" while updating the phone when the odin program froze and ruined/bricked my phone... i have tried all the steps to try and un-brick my phone but at this point im about ready to give up.... at this point my phone will not power on in any mode nor will it go into recovery mode or download mode... if any one has any info on how to fix this please let me know....
Hi
I have an SGS on Orange in UK and tried following this guide
http://forum.xda-developers.com/showthread.php?t=853950
using odin and got to the pass stage. Now my phone has gone off and won't turn on!!
Ahh am a complete novice, any help please??
Thanks
please anyone able to help?
sure it wont turn.. on.. if not you are hosed.. leave battery out for 10 minutes.. also battery may be dead.. couldve drained while screen was black and it looked off.. do you have external charger or another battery..
hi,
thanks for your reply. I tried connecting it to a battery charger but no response from the phone!
What a bugger, I tried following the guide and checking the 3 button thing worked before. Do you think Samsung would repair? Or does this invalidate the warranty?
You could try cleaning the battery contacts on the phone and the battery itself. I think there is a blow dryer trick some guys have used to get life back in to a non responsive phone. Just do a quick search on these forums you should find instructions.
Here is a thread with a video in it.
http://forum.xda-developers.com/showthread.php?t=772750&highlight=blow+dryer
So you say three button recovery doesnt work, and it was working before?
Download Mode works for me even if battery is 0%
Plug into charger and wait 10 minutes.
Then take out the battery and try to go to download mode without charger.
I dont recommend dryer.
Try homemade JIG, its easy to do.
It seems that you do something wrong, because all of this seems to be totally weird brick.
Indeed it worked before and now does not,
After flashing was completed, the screen went blank and stayed that way. I did nothing for about 10 mins and then disconnected USB and tried turning back on. Nothing. Power button does nothing. Power+Up+home does nothing. Power+down+home does nothing. Battery taken out and then reinserted does nothing. Battery charged does nothing
Am slightly annoyed at myself about doing this and quite frustrated!
looks like i'm up the creek then. will take it back to phone shop and see if they can send it back
Hello all,
I searched around, but didn't find anything quite like my issue so figured I'd create a new thread.
I work for a company that uses Galaxy Tabs for various purposes. One of our men brought back their VZW Galaxy Tab (SCH-i800) and it was in an infinite boot loop.
I went to recovery and attempted to do a full wipe. This did not work (partitions were all jacked up) so I couldn't get it fixed. I'm not sure if the guy tried to root the thing and broke it or what.
Anyway, I was attempting to root then fix the partitions (then was going to flash a stock unrooted rom) and ended up soft bricking it (Phone Icon -- /!\ -- Computer Icon). The issue I'm having is the only time that screen comes up is when the device is plugged into the wall. It turns on, then off, then on, then off. If I unplug the device, it shuts down with no way of bringing it back up. I've tried holding power for 5 minutes, the same amount of time with power + vol up and power + vol down. Plugging it into the computer's USB ports does not help either.
It's like the battery is drained but it won't charge when it's on the soft brick screen. I've had it plugged in to the wall for almost 6 hours now with no hope in sight. When it's plugged in, I feel heat on the back of the device like it would normally be charging. The AC adapter is also the standard warmth after a lengthy charge.
I was wondering if anybody has had similar issues with this device and if there is any way to correct it.
--- EDIT 8/10/2012 ---
Another thing of note is when the device is charging, I can power it down by holding power for a few seconds, but the Soft Brick screen pops back up almost immediately upon release of the button.
I cannot boot into recovery or the standard download mode even when it's plugged in.
As long as you can get the Phone ! PC screen, your'e good, because this screen IS as a download screen. Go to this screen and flash a known good ROM.
ableeker said:
As long as you can get the Phone ! PC screen, your'e good, because this screen IS as a download screen. Go to this screen and flash a known good ROM.
Click to expand...
Click to collapse
You must not have read the whole thing. Not a problem.
The only time I get the Phone ! PC screen is when it's plugged in to the wall. As soon as I unplug it, it goes away and the device won't start up no matter what I try.
When you connect the tab to the pc, is it recognized by Odin.
Sent from my GT-P1000
salahmed said:
When you connect the tab to the pc, is it recognized by Odin.
Sent from my GT-P1000
Click to expand...
Click to collapse
No... When the device is unplugged from the wall it is shut down and won't boot back to the download screen, recovery, nothing. It doesn't turn on. There are occasions where the download screen stays up but it appears to just be frozen. The computer doesn't recognize it and neither does Odin.
I left it plugged in when I left work on Friday... Going to see if charging for the weekend does anything.
MaskedDriver said:
No... When the device is unplugged from the wall it is shut down and won't boot back to the download screen, recovery, nothing. It doesn't turn on. There are occasions where the download screen stays up but it appears to just be frozen. The computer doesn't recognize it and neither does Odin.
I left it plugged in when I left work on Friday... Going to see if charging for the weekend does anything.
Click to expand...
Click to collapse
No dice.. still jacked.
I determined the following scenarios may have happened:
1) The battery died (bad battery) during a software update and messed up the partitions
2) The battery died (bad battery) while he attempted to (unauthorized) root or flash the device, messing up the partitions.
The only thing I'm sure of is the battery is fried so any kind of hacking I can do to the device are for naught. I was able to get it to connect to Odin this morning for about 3 minutes (after having it plugged in to the wall all weekend). During the flash it shut down again bricking it even worse. Now the device won't turn on when plugged in to the wall.
Thanks for the suggestions and help. I'm calling this a lost cause at this point. We're just swapping out the device for a new one. Once that's complete, I may tear the device down and try to do a reset on the main board to see if that does anything, though I doubt that's the case.
Right I had exactly the same problem as you (exactly the same symptoms) but I have now fixed my tablet.
Like you I got to the point where the Tablet had enough charge to actually unplug it and connect it to my PC where I then tried to flash a stock ROM using Odin. About three quarters of the way through flashing the stock ROM the tablet died, disconnected from Odin and I got a message in the task list in Odin advising me that the process had failed. Even weirder my PC did an emergency shut down and restarted in safe mode.
Anyway I tried it again but when I started my machine, once I'd logged onto my desktop I started up Odin as quickly as possibly, selected the .tar file and pressed start as quickly as possible....it worked and my tablet was flashed with a stock ROM. However my battery was still pretty much dead and the first time of charging once it had been flashed with the ROM took about 24hrs plugged in at a mains charger for the battery to reach 100%.
My point is persevere with it and you will fix it. I was at the point where I was about to send it off to be un-bricked but obviously I'm glad I didn't now.
It is a ***** of a brick though, this 'coma brick'.
I've been having these same issue with my friends i800 galaxy tab. Can you chime in and offer some advice?
Sent from my Galaxy Nexus using Tapatalk 2
same problem-solved
I was having the exact same issue. the device screen was completely black when plugged into the computer. I was just about to give up when, all of a sudden the device went to the boot error screen while plugged into my computer. Apparently, it must remain plugged into the computer for about 20-30 minutes. Once this screen appeared, I ran the Heimdall one-click unbrick utility, and like magic, my galaxy tab was working again. Give it a try, and good luck.
MaskedDriver said:
Hello all,
I searched around, but didn't find anything quite like my issue so figured I'd create a new thread.
I work for a company that uses Galaxy Tabs for various purposes. One of our men brought back their VZW Galaxy Tab (SCH-i800) and it was in an infinite boot loop.
I went to recovery and attempted to do a full wipe. This did not work (partitions were all jacked up) so I couldn't get it fixed. I'm not sure if the guy tried to root the thing and broke it or what.
Anyway, I was attempting to root then fix the partitions (then was going to flash a stock unrooted rom) and ended up soft bricking it (Phone Icon -- /!\ -- Computer Icon). The issue I'm having is the only time that screen comes up is when the device is plugged into the wall. It turns on, then off, then on, then off. If I unplug the device, it shuts down with no way of bringing it back up. I've tried holding power for 5 minutes, the same amount of time with power + vol up and power + vol down. Plugging it into the computer's USB ports does not help either.
It's like the battery is drained but it won't charge when it's on the soft brick screen. I've had it plugged in to the wall for almost 6 hours now with no hope in sight. When it's plugged in, I feel heat on the back of the device like it would normally be charging. The AC adapter is also the standard warmth after a lengthy charge.
I was wondering if anybody has had similar issues with this device and if there is any way to correct it.
--- EDIT 8/10/2012 ---
Another thing of note is when the device is charging, I can power it down by holding power for a few seconds, but the Soft Brick screen pops back up almost immediately upon release of the button.
I cannot boot into recovery or the standard download mode even when it's plugged in.
Click to expand...
Click to collapse
I am having this issue with my sch-i800.... phone /!\ pc screen only when plugged into the wall, and no recognition of it on the pc. Any way of fixing it?
Yesterday i was recording video on my note, and when i stopped recording, it got stuck on the screen. after waiting for some time, i had to hard reset my phone. I pressed the power button for a few seconds and phone shut down. But it refused to start up,however hard i have tried. I tried booting to recovery and download mode....but still nothing happened. It refused to enter recovery or download mode...:crying:
I got home and tried to connect to my pc, nothing hapened. I tried charging it, but no signs of charging. Tried ADB, couldnt recognize my device...
I was on Aylum 4.4.1(6 DEC nightly) using herna's kernel and rooted using SuperSU 1.80. No extra mods installed. Was running fluidly for 2 days...no freezes,etc. And suddenly died....
Please guys help me out. Is my note bricked?
Try removing the battery and waiting 10 minutes. After that then put the battery back in and try to boot it up. If that doesn't work then try a different battery in your phone or try to recharge you current battery through a recharger (you can buy them on ebay)