Database Develop

Galaxy Tab bricked.. like really bricked

Ok guys, I feel this is just the end of the games... I was flashing back the Roto JME fw with the swype keyboard issue fixed that I have just made, when I accidentally unplugged the tab while starting flashing and in downloading mode.
Now all I get is a logo with a phone an alert symbol and a computer .
Windows as well as Odin see it, but I can't do anything, as Odin hangs on waiting for connection, or something like that.
Is there anything I can do?? Or do I really have to take it to the warranty? And if I will have to take it to the warranty will they see I have previously flashed a beta rooted image on it??
Here's what I am talking about
Please I need some help..
Thanks

Is there no recovery mode by buttons like the captivate? I hate seeing all the bricks
Sent from my SPH-P100 using XDA App

Its not bricked
heimdall close-pc-screen
should restart it
then power it off
then put it into download mode again using power + volume down
-d

Technomancer said:
Its not bricked
heimdall close-pc-screen
should restart it
then power it off
then put it into download mode again using power + volume down
-d
Click to expand...
Click to collapse
damn it says Failed to access device. Error: -12 .. I am on windows with latest version of heimdall ...

Segnale007 said:
damn it says Failed to access device. Error: -12 .. I am on windows with latest version of heimdall ...
Click to expand...
Click to collapse
Ops, it was the driver... damn windows ...
Solved btw.. I just realized I have lots of things to learn ... I have almost died of heart attack when I saw my tab stucked on that logo.. and now its back again..
Thank u falks

You need to make sure samsung kies are not running for sure unistall it and try it again

use odin. that is still download mode. might take you a couple of tries but works. i was in your shoes the other day

Everything is fixed thanks to Tecnomancer. Thank u guys
Sent from my GT-P1000 using XDA App

Could you please list the steps you went through in order to fix this - for everyone else's sake? Thx!
Segnale007 said:
Everything is fixed thanks to Tecnomancer. Thank u guys
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse

I've heard plenty of goofy stories about bricking devices over the years. You must conclude the following:
1.Flash your device in a locked room to avoid your wife/ child pulling cables or pressing buttons.
2.Don't touch anything while you're flashing. This is why many people that could help you will ignore you after reading about 'accidentally disconnected' wires - they just assume you're a moron not worth helping.
3.Read instructions carefully and write the procedure out in your own words if its your first time.
I've been flashing for years and haven't had a brick yet. Not crossing my fingers either because it has little to do with luck and much to do with care. In this way its a lot like making babies...

ftgg99 said:
2.Don't touch anything while you're flashing. This is why many people that could help you will ignore you after reading about 'accidentally disconnected' wires - they just assume you're a moron not worth helping.
Click to expand...
Click to collapse
Good advice.
My only semi-bricks (that involved an hour or two of trial and error to unbrick) resulted from some manner of overzealous cable unplugging.

zyborg said:
Could you please list the steps you went through in order to fix this - for everyone else's sake? Thx!
Click to expand...
Click to collapse
This is what I have done
Technomancer said:
Its not bricked
heimdall close-pc-screen
should restart it
then power it off
then put it into download mode again using power + volume down
-d
Click to expand...
Click to collapse

ftgg99 said:
2.Don't touch anything while you're flashing. This is why many people that could help you will ignore you after reading about 'accidentally disconnected' wires - they just assume you're a moron not worth helping.
Click to expand...
Click to collapse
Well, first of all thanks for ur nice words. Let me just say that I was about to disconnect another device from the hub where the GTAB was attached and flashing at that time, and yea, I accidentally unplugged the GTAB instead of the other device. I may be a moron, thanks, and thankfully not everyone believes themselves as god, which is a good reason to not help other people who are in troubles, even if for stupid things sometimes... If everyone were thinking like u we were probably still at the age of 1400 ...

Mate it wasn't a barb directed at you personally, but you weren't exactly careful were you?
I'm no god... but I've never bricked a device either, and I've been flashing for over five years now. To top it off I've almost never owned a device which could be taken back to the shop (90% of them come from other countries, not my local retailers). Perhaps this has taught me to be careful.
In any case, what I said holds true, and if you ask around I'm certain you find most will agree.

Dude, you have the best avatar! I can't keep my eyes away! Good luck, and don't worry about mistakes - that is one reason this forum exists.

Cannot start my Gtab after trying update JMC
...Hello everybody,
I am really worry about the fact my Gtab doesn't want to switch on after trying to flash it. I tried all process to put it on download mode or recovery but nothing work.
Do you have any idea about it ? Is there a specific procedure to switch on (eg : press power for 1 minutes + blablabla).
My provider doesn't want to take my Gtab in warenty before my contract is activated (the 4th of february).
Thank you for your answer

HELP, I have same problem, please explain how Hemidall can fix it?
Thanks
[email protected]

zyborg said:
Could you please list the steps you went through in order to fix this - for everyone else's sake? Thx!
Click to expand...
Click to collapse
I also had a semi-bricked VZW Tab, with the phone-triangle-computer warning graphic at start up. (I flashed a new boot loader, and failed to read the instructions closely enough. Either the file was incorrect for my device, or the drivers were not loaded correctly, but my tablet was borked.)
Using heimdall 1.3.2 (with the correct drivers, on a 32-bit windows system), I clicked the "close pc screen" option to clear the warning.
I then held the power button until it turned off, then held vol+ and power to re-enter download mode. Once in download mode, I used heimdall 1.1.1 to flash the zImage from SCH-I800-Stock-Rooted-2.3.5. My tablet (still unrooted, and still stock?) booted, but sat at the SAMSUNG logo for ten minutes or more. (It announced its progress, telling me periodically "five minutes remaining", etc.)
Once it finished, my tablet was revived. I will now follow the above advice and read all instructions very carefully, re-writing them in my own words to ensure I understand what I'm doing, before I try this again.

One year old thread......do you guys ever watch posting dates???
Sent from my GT-P1000 using Tapatalk 2

...like REALLY bricked
bumping this old thread in hopes that someone can point me in the right direction...
Got my p7510 (10.1" wifi retail) stuck pretty badly when trying to restore stock ROM coming from Overcome (it came rooted from ebay). From what I gather from the forums, seems like my bootloader is still locked.
whenever I attempt to flash a BOOTLOADER, PIT, or PDA using ODIN it connects, initializes, and gets stuck on "Flashing boot.img"
I think the recovery partition is damaged. When I boot using Power + Volume Down, I can get to the screen where you select recovery mode or download mode but recovery mode will not load. The screen flickers when I select recovery, but goes nowhere. Download mode works.
I tried using nvflash to force the right software onto it but I get error 0x4 (usb write failed).
There has to be a way to restore the stock bootloader and get this thing running again. Tablet will not boot android at this point. I have been searching the forums for about a week now, anyone have any ideas?

[Q] Serious major problems with my Milestone

My milestone(Telus; BL 90.74) is pretty much bricked. I tried to do this, but like with everything else I do modding wise I failed horribly. It got to the point to where whenever I tried turning on my phone, it would stay frozen on the M logo. I've wasted my entire day searching from blogs to forums to videos trying to fix this but nothing worked. And now my phone won't even turn on unless I access the bootloader menu.
I know I have to reflash the sbf file, but the thing is my computer no longer detects my phone since the disaster. I'm really frustrated and stressed because of this. I thought doing a factory reset would do something but now all of my data on the phone is gone for nothing.
Can anyone please help? I know there's like 7 threads on this, but none of them help even if I follow the instructions step by step.

have made a backup? to open recovery?

Shoib said:
My milestone(Telus; BL 90.74) is pretty much bricked. I tried to do this, but like with everything else I do modding wise I failed horribly. It got to the point to where whenever I tried turning on my phone, it would stay frozen on the M logo. I've wasted my entire day searching from blogs to forums to videos trying to fix this but nothing worked. And now my phone won't even turn on unless I access the bootloader menu.
I know I have to reflash the sbf file, but the thing is my computer no longer detects my phone since the disaster. I'm really frustrated and stressed because of this. I thought doing a factory reset would do something but now all of my data on the phone is gone for nothing.
Can anyone please help? I know there's like 7 threads on this, but none of them help even if I follow the instructions step by step.
Click to expand...
Click to collapse
Do you get any error shown while going into bootloader mode?
Sent from my Milestone using Tapatalk

maybe try a diffrent computer first or try the official motorola update software?

press "up" on keyboard when power on, can it be detect by rsd now?
Sent from my Milestone using XDA App

max_avatar said:
have made a backup? to open recovery?
Click to expand...
Click to collapse
No, I haven't made a backup yet. I haven't accessed openrecovery either, the guide gave me a headache.
sileshn said:
Do you get any error shown while going into bootloader mode?
Sent from my Milestone using Tapatalk
Click to expand...
Click to collapse
It says "Battery Ok
Ok to program
connect USB
Data Cable"
smokeymacweed said:
maybe try a diffrent computer first or try the official motorola update software?
Click to expand...
Click to collapse
I could try that by putting an official update.zip so the boot loader will accept. Problem is there isn't any updates further to what I have and froyo womn't come anytime soon unless you were referring to something else.
DummyPLUG said:
press "up" on keyboard when power on, can it be detect by rsd now?
Sent from my Milestone using XDA App
Click to expand...
Click to collapse
Let me try this. I'm going to bed for now, Ill post results tomorrow.

You can try installing your usb drivers again and try.Since you did not get any error in the bootloader mode, it could be problems with your usb drivers.
Uninstall the usb drivers and reinstall them again. Then try.
BTW, which version of rsdlite are you using?

Helo
Maybe tray this:
- Download an RSD Lite (I use 4.7)
- Download an GOT firmware from: and-developers.com / sbf:milestone (bottom of site)
- Set the phone to bootloader mode
- Start RSD Lite with Administrator permissions
- Connect the phone
- Select the downloaded sbf file
- When U see phone connected click Start
Sorry for my english

xdazoli said:
Helo
Maybe tray this:
- Download an RSD Lite (I use 4.7)
- Download an GOT firmware from: and-developers.com / sbf:milestone (bottom of site)
- Set the phone to bootloader mode
- Start RSD Lite with Administrator permissions
- Connect the phone
- Select the downloaded sbf file
- When U see phone connected click Start
Sorry for my english
Click to expand...
Click to collapse
Ok, I did everything you said and flashed it with A853_Telus_Firmware_SHOLS_U2_03.10.0__USASHLSMR2TLSB1B2B505F.0R_1FF.sbf. But now it still gets stuck at the moto sign
Edit: I think I might have a solution as I flashed the phone with vulnerable_recovery_only_RAMDLD90_78.sbf which will let me use an update.zip. The only problem is I can't access my memory card and I don't have anything that could at home.
Edit: Ok, I fixed my phone and now it has 2.2.1. Thanks guys, I appreciate the help.

[Q] Restoring Captivate from AT&T World Phone Screen

Hey folks. I'm hoping to get through this in one piece, with one walkthrough.
I recently messed up in flashing a Rom to my Captivate. It cleared the phone of firmware and left me with the AT&T splash screen.
I bought a jig, and am now at the "Downloading..." screen and am trying to take this slowly to ensure a properly functioning phone (I've been without for two weeks now).
I've read through the sticky post [link]http://forum.xda-developers.com/showthread.php?t=884364[/link] and have most of the downloads. The Odin link is dead, and I don't have the proper version (I used a version I later found out was bad).
What I'm hoping for is to get someone to show me where the proper version of Odin is, and maybe give me a quick guide to doing this for a Rogers Galaxy S Captivate.
I hope I'm not coming off as lazy, but I tried this solo, and it went awry. Thanks for any help in advance.

This is the link for Odin. http://forum.xda-developers.com/showthread.php?t=731989
You want to Open Odin, then use the jig to put the phone in download mode, connect usb to your computer and wait until odin recognizes your phone. Click Start and sit back and wait. You should then be able to put whatever rom you want on the sd card and flash

Okay. I got the proper download, and used Odin. It reported success.
I haven't unplugged the phone from the computer yet, but it's also not showing as a drive on my computer. I'm at the stage where I'm supposed to root the phone after using Odin and before flashing.
Should I unplug the phone, or is that going to send me back to square one?

JavaMac said:
Okay. I got the proper download, and used Odin. It reported success.
I haven't unplugged the phone from the computer yet, but it's also not showing as a drive on my computer. I'm at the stage where I'm supposed to root the phone after using Odin and before flashing.
Should I unplug the phone, or is that going to send me back to square one?
Click to expand...
Click to collapse
If you used that Odin 1 click you will have the AT&T version, it will work but you will have the AT&T boot up screen. After it is finished your phone should reboot by itself. If it didn't try pulling the battery and then turn it back on.

Driver Installation Issue at Fault?
Okay, so I'm starting to wonder what's going on with the communication between my phone and my computer. I have the drivers, but when I try to install them (64 bit, for a dual-core, right?), it claims to fail.
I think maybe that this is the reason I can't get the computer to recognize the drive. Also, when plugged in last time, it said it failed to install drivers again. Even when the phone was operational, I had issues with that.
So . . . I'm wondering if maybe I solve that and the issue becomes seamless. Any thoughts on this would be appreciated, as it seems I'm stuck until I get the phone to register. Even Odin won't see it now, although I've already passed that step. F-Bomb.

Did you get the drivers right from samsung web site if not thats why they wont install i had same thing when i got my cappy.
I got drivers from.samsung.com installed em worked perfect sence. i kept the download saved had to install em a few times over the last 9 or so months. Only because of all the dam software hardware i run. Good luck
Sent from my GT-I9000 using XDA App

Just because it's a dual core processor in the computer doesn't mean you have a 64 bit OS.
You might want to know what version of windows you have...just a thought.

Okay . . . I can't seem to resolve this driver problem, nor can I move forward in the previous issue of getting my phone back to a functional state.
I can't imagine what I'm doing wrong that everyone else managed to avoid. Could I maybe request some one-on-one time with an experienced Rogers user? Just to recall the exact steps they took in order to successfully UNSCREW their phone.
Again, I appreciate all the help. Every post is making progress. I'm just frustrated at my ineptness with solid state installations.

I'm still not able to install the drivers or get my computer to register the phone as a drive. I did a bit more reading, but I've found nothing but different driver links. Has anyone else had this installation failure?

I have had driver problems before...try plugging up phone; on computer control panel, device managment , go to were it has device (just click then till se something about samsung) then uninstall drivers, next unplug phone, reinstall drivers that are on design gears (developer) thread for odin one click, next plug up phone sbf it will say new hardware and install drivers then see if that works... Ps if need to just pm me and I will get back to you to try and help
Sent from my SAMSUNG-SGH-I897 using XDA Premium App

A side note: I just tried it from my computer and the link if good and they work
Sent from my SAMSUNG-SGH-I897 using XDA Premium App

Try it again, however this time plug your USB cable into the USB port in the back of the computer.

Drivers were installed properly with Toolbox. Thanks for the help

HELP! Power button is broke, can't get into download mode!

I need help ASAP. been pulling my hair out for hours now! my power button on my captivate is broke and I have Cognition 4.5 installed, and i Need to get it into download mode so I can put stock froyo on and get it taken care of today! I am without a properly working phone till I get this fixed! I downloaded SDK tools, but can't figure out how to get an adb server to connect to the device so I can go into download mode. Someone help me anyway you can!

There are two things you can try:
First this program worked great for me as I had never used adb before and needed it to get stuff off my phone when I broke the screen. Give it a try
http://forum.xda-developers.com/showthread.php?t=1273416
Second look up how to make a download mode jig and then go to radio shack and grab the parts necessary to get it made.

rquiett said:
There are two things you can try:
First this program worked great for me as I had never used adb before and needed it to get stuff off my phone when I broke the screen. Give it a try
http://forum.xda-developers.com/showthread.php?t=1273416
Second look up how to make a download mode jig and then go to radio shack and grab the parts necessary to get it made.
Click to expand...
Click to collapse
Dude you are a lifesaver! my phone is in the process of using heimdale one-click to go back to stock froyo as we speak! That ADB GUI was all I needed!
EDIT and I'm back on stock froyo and headed to the AT&T store! Thanks again!

Sweet glad it worked for you.
Sent from my SAMSUNG-SGH-I897 using xda premium

Only Download Mode
Sorry for hijacking this thread as dint wanted to start a new thread.
Question:- When trying to turn on the phone the phone goes to Download with just the power button i haven't seen the phone or checked it personally (it belongs to a friend).
As per him the phone was running CM 7 and how this happened he don't know he said when he tries to turn it on with the help of power button it straight goes to DL mode, Also no recovery for him.
I did asked him to put the phone in DL and check does the PC recognizes it.
My Question is why did this happened and How ?

Well never seen that before...but its prolly recovery mode...but if it is dl mode...flash to stock to verify that it is not hardware defect
Sent from my SAMSUNG-SGH-I897 using XDA App

[GUIDE] How to Install Ice Cream Sandwich on your Rogers P925 (Or fix baseband issue)

Well, after a TON of work, and unsuccessful attempts at getting this, I finally was able to get signal and working data on my phone. I know some people had had trouble with the process, so I'm going to post my guide here to help you all out.
There are two parts to this tutorial. Only one is needed, however, to get ICS to properly work, so find the one that fits your current predicament AND ONLY USE THAT PART OF THE TUTORIAL.
If this is your first time installing the ICS rom...
Follow the LG flashing tool guide that XBSall has linked in his ICS Rom post. You can also find it at http://forum.xda-developers.com/showthread.php?t=1244490 . However, when you install the ROM, DO NOT USE THE .FLS FILE HE PROVIDES. Instead, download the v18A baseband and install that one with the .BIN file he provides. You can find the v18A baseband here- http://forum.xda-developers.com/showthread.php?t=1338383 I believe. After you flash the entire thing, you should have ICS! Easy!
If you have the ICS Rom installed now, but have no signal...
This is a bit more complicated, but still very easy. After I flashed ICS, I was not able to flash things using LGFlashTool like I could in GB. This is how I ended up flashing the baseband to fix my issues.
We need to set up your phone to connect with LGFlashTool first. To do this, use XBSall's restore to GB method, located at http://forum.xda-developers.com/showthread.php?t=1942836 . You will need the OMAP4BOOT files, but you will need nothing else.
Follow his tutorial up until step 6. When he tells you to insert the battery, insert it AS FAST as you can. I messed up on the timing the first few times. Once I saw a greyscale LG logo, and a few other times it just booted normally. Just try again if this happens. Eventually you will get the screenshot in step 9. DO NOT remove the cable when OMAP4BOOT tells you to, as well.
Follow step 10 and 11 of XBSalls restore tutorial, and then follow step 12. When you set up LGFlashTool for the reflashing, simply select the v18A baseband to flash and then start the process. If done correctly, Port 1 should state READY. Repeat steps 3-9 in his tutorial. It will start the flashing process. Once you get an error, close the program, and remove your phones battery and disconnect it from your computer.
Turn on your phone, and receive signal. PROFIT.
Hope this helps you guys out a bit, and remember to hit thanks if this helped you.

you beat me to it lol I was just about to post steps just like this
Sent from my LG-SU760 using xda premium

still no signal... ill try again... atleast closer to fixing... attached is the error im getting... when i go into About and check the baseband it still has V30
EDIT: When into System Settings > About Phone > Software Information ... it is showing the following information.
Baseband Version: XMM6260
Software Version: LGSU760-V30b-OCT-18-2012

Can anyone help? The guide dosent show you how to install the OMAP4430 drivers, but i found out myself how to do it so whatever. Problem is, now "OMAP4430 USB Device" is dissappearing and reappearing over and over again when i boot with volume up. Can anyone shed some light as to how to fix this?
And my phone isnt bricked, i can turn it on right now and everything.
EDIT: Found the problem, you need to hold VolUp after OMAP4430 pops up. Funny, it says in the guide to let go when it pops up. Fixed my mistake though.

llsektorll said:
still no signal... ill try again... atleast closer to fixing... attached is the error im getting... when i go into About and check the baseband it still has V30
EDIT: When into System Settings > About Phone > Software Information ... it is showing the following information.
Baseband Version: XMM6260
Software Version: LGSU760-V30b-OCT-18-2012
Click to expand...
Click to collapse
I have the same thing on my phone. Maybe try to reflash the v18A baseband again?

u can use V20A or V21B basebands also they work too
Sent from my LG-SU760 using xda app-developers app

llsektorll said:
still no signal... ill try again... atleast closer to fixing... attached is the error im getting... when i go into About and check the baseband it still has V30
EDIT: When into System Settings > About Phone > Software Information ... it is showing the following information.
Baseband Version: XMM6260
Software Version: LGSU760-V30b-OCT-18-2012
Click to expand...
Click to collapse
OH MY GOSH. NOW THAT I HAVE ACCESS TO YOUR SCREENSHOT, I NOTICED YOU HAVE THE THING THAT HAD ME STUMPED FOR HOURS.
Follow the second part of my tutorial to the T. If it still doesn't work, maybe I'll make a video or we can go on Teamviewer and I'll try to help you out.

BG64 said:
OH MY GOSH. NOW THAT I HAVE ACCESS TO YOUR SCREENSHOT, I NOTICED YOU HAVE THE THING THAT HAD ME STUMPED FOR HOURS.
Follow the second part of my tutorial to the T. If it still doesn't work, maybe I'll make a video or we can go on Teamviewer and I'll try to help you out.
Click to expand...
Click to collapse
I tried everything to detail and it doens't work. PM me when you are available to teamview. I will be here till 1am -6GMT (CST)
PM me when you are ready to go I'll be here.

not able to keep OMAP 44xx device connected
Hello everyone,
I'm currently trying to get ICS installer on my rogers P925. I tried many times on two computers (both windows 7 one is 32bits other is 62bits) to flash the bin and fls files you are recommanding but it seems like even if my OMAP 4430 device driver is correctly installed via the program files texas instuments dll it seems it wont stay connected at all and just pop open and closed sometimes when it seems to want, and it makes the flashing procedure impossible to me any ideas?

b.charles.gagne said:
Hello everyone,
I'm currently trying to get ICS installer on my rogers P925. I tried many times on two computers (both windows 7 one is 32bits other is 62bits) to flash the bin and fls files you are recommanding but it seems like even if my OMAP 4430 device driver is correctly installed via the program files texas instuments dll it seems it wont stay connected at all and just pop open and closed sometimes when it seems to want, and it makes the flashing procedure impossible to me any ideas?
Click to expand...
Click to collapse
Although mine hasn't worked in flashing properly I might be ables to get your drivers to connect properly so that LGflasher starts flashing. PM me your teamviewer ID and PW

BG64 said:
Well, after a TON of work, and unsuccessful attempts at getting this, I finally was able to get signal and working data on my phone. I know some people had had trouble with the process, so I'm going to post my guide here to help you all out.
There are two parts to this tutorial. Only one is needed, however, to get ICS to properly work, so find the one that fits your current predicament AND ONLY USE THAT PART OF THE TUTORIAL.
If this is your first time installing the ICS rom...
Follow the LG flashing tool guide that XBSall has linked in his ICS Rom post. You can also find it at http://forum.xda-developers.com/showthread.php?t=1244490 . However, when you install the ROM, DO NOT USE THE .FLS FILE HE PROVIDES. Instead, download the v18A baseband and install that one with the .BIN file he provides. You can find the v18A baseband here- http://forum.xda-developers.com/showthread.php?t=1338383 I believe. After you flash the entire thing, you should have ICS! Easy!
If you have the ICS Rom installed now, but have no signal...
This is a bit more complicated, but still very easy. After I flashed ICS, I was not able to flash things using LGFlashTool like I could in GB. This is how I ended up flashing the baseband to fix my issues.
We need to set up your phone to connect with LGFlashTool first. To do this, use XBSall's restore to GB method, located at http://forum.xda-developers.com/showthread.php?t=1942836 . You will need the OMAP4BOOT files, but you will need nothing else.
Follow his tutorial up until step 6. When he tells you to insert the battery, insert it AS FAST as you can. I messed up on the timing the first few times. Once I saw a greyscale LG logo, and a few other times it just booted normally. Just try again if this happens. Eventually you will get the screenshot in step 9. DO NOT remove the cable when OMAP4BOOT tells you to, as well.
Follow step 10 and 11 of XBSalls restore tutorial, and then follow step 12. When you set up LGFlashTool for the reflashing, simply select the v18A baseband to flash and then start the process. If done correctly, Port 1 should state READY. Repeat steps 3-9 in his tutorial. It will start the flashing process. Once you get an error, close the program, and remove your phones battery and disconnect it from your computer.
Turn on your phone, and receive signal. PROFIT.
Hope this helps you guys out a bit, and remember to hit thanks if this helped you.
Click to expand...
Click to collapse
XBSALL helped me out! It's finally working now! My problem was with the port. He got my phone rooted, changed USB port (I mistakenly was changing the wrong one), installed TWRP, put his ICS cleaned mod version on through TWRP zip install. It's all working now full bars of 3G!

help?
Finally got to flash ICS on phone but it was giving me errors everytime I wasn't using original baseband associated with .bin file. Now, I can't get it to boot in fastboot even using OMAP4boot I don't really understand when I need to insert fast the battery... OMAP4boot doesn't seem to get my phone...

You will always get errors as these are not full kdz files. If you are stuck at lg logo..try pull batt replace then hold vol- and power button til you see a factory reset screen do reset and boot..that made mine boot.
Sent from my LG-P925 using xda premium

Bdadd34 said:
You will always get errors as these are not full kdz files. If you are stuck at lg logo..try pull batt replace then hold vol- and power button til you see a factory reset screen do reset and boot..that made mine boot.
Sent from my LG-P925 using xda premium
Click to expand...
Click to collapse
Sorry, maybe I wasn't clear enough, but my phone boots now, it's only I had to flash it with the O3D fls file and not the .fls I was supposed to use so I get a working ICS without any network.
Now that i'm trying to complete step 2 to get te right baseband, i can't get the phone to boot in download mode even using OMAP fasboot flash. the software just don't say anything appart from "waiting for phone".
So I was wondering if I was doing anything wrong

b.charles.gagne said:
Sorry, maybe I wasn't clear enough, but my phone boots now, it's only I had to flash it with the O3D fls file and not the .fls I was supposed to use so I get a working ICS without any network.
Now that i'm trying to complete step 2 to get te right baseband, i can't get the phone to boot in download mode even using OMAP fasboot flash. the software just don't say anything appart from "waiting for phone".
So I was wondering if I was doing anything wrong
Click to expand...
Click to collapse
Try the resurrection guide by xbsall it finally worked for me after I did everything I was supposed to I kept missing simple steps
Sent from my LG-SU760 using xda app-developers app

wayno140 said:
Try the resurrection guide by xbsall it finally worked for me after I did everything I was supposed to I kept missing simple steps
Sent from my LG-SU760 using xda app-developers app
Click to expand...
Click to collapse
Finally download mode is quite simple to acess (discovered on my own searching for a recovery)
1- power, vol+ , 3d button pressed
2- on lg logo release power
3- after 2 seconds approx release 3d button
4- wait for the korean page indicating LG SERVICE and a phone
you should be in it!!
now i'm getting a curious RAM writing error while using this mode on lg flash tool

b.charles.gagne said:
Finally download mode is quite simple to acess (discovered on my own searching for a recovery)
1- power, vol+ , 3d button pressed
2- on lg logo release power
3- after 2 seconds approx release 3d button
4- wait for the korean page indicating LG SERVICE and a phone
you should be in it!!
now i'm getting a curious RAM writing error while using this mode on lg flash tool
Click to expand...
Click to collapse
You need to do it this way http://forum.xda-developers.com/showthread.php?p=32945961 and only the way read the whole first 2 pages and do everything xbsall is a genius as are the people that worked with him to come up with the guide
Sent from my LG-SU760 using xda app-developers app

wayno140 said:
You need to do it this way http://forum.xda-developers.com/showthread.php?p=32945961 and only the way read the whole first 2 pages and do everything xbsall is a genius as are the people that worked with him to come up with the guide
Sent from my LG-SU760 using xda app-developers app
Click to expand...
Click to collapse
it's almost the 10th time I follow the guide step by step by step... I think or i'm always doing wrong something or it's something else with my phone... I may have misconfigured one port but i do NEVER NEVER at all in the process see OMAP4430 device in my device manager.. so the little windows tool is not doing anything... maybe if someone wanna teamviewer they can see for themselves what it gives.

Wahoo, ICS + network
finally found that there was the correct driver for my computer in the omap4boot folder and not in everyother one I was installing, flashed with the guide after i found this driver and everything works fine
only thing i'm struggling is to set apns to get 3G any tricks?

Do a Google search for AT&T 4G APN (or whoever our carrier is). You can also create an APN with the word "phone" in the first two blanks, name and APN (I think), and it should give you access to 3G and HSPA. I hit 6.7mbps on Speed Test.
Sent from my LG-SU760 using xda app-developers app