guyzz i successfully installed clockwork recovery mod using ROM MANAGER on my indian version of galaxy s GT-i9000 but when i try "reboot into recovery" the phone boots into stock recovery mod.plzzz help me out guyzz
It's not CWM you should be angry at - it's perfect. Blame the ROM Manager - try to get in CWM through the 3 button combo (Volume up + Menu button + Power button) and if that doesn't work just flash CWM with Odin.
Bro thnx for the reply .....i tried the combos it takes me back again to the stock i.e Android system recovery <3e>..
select apply sdcard : update.zip or something like that
once or twice and it should take u into CWM
otherwise as said above, flash it through odin,
Hey kartik . Can u guide me how to install cm7 on our galaxy s. I m also frm india .nplz guide yaar check ur pm
That sounds like you have a stock Kernel.....try flashing an odin version of speedmod kernel.
You have 3e recovery which does not support CWM you need to flash a kernel with 2e recovery (CF-Root) or one qwith CWM built in (speedmod)
Related
hey all,
i have an i9000 that when i reboot to recovery, it ALWAYS goes back to recovery 3e which is a pain. I have to use odin to flash to another kernel temporarily to get 2e back to install a simple update, which then turns into a big complete reset flash when it shouldn't. Anyone know why this happens? I am have attempted with docrom ROMs with both voodoo and speedmod kernels which both include clockwork, but reboot to recovery just goes to 3e again instead of clockwork. do i nede to repartition (using odin and perhaps a PIT) or is this irrelevant and something else is up. My friend has the same phone and never had this problem.
Using Docrom JPJ with speedmod kernel and froyo 2.2.1 atm.
anyone help?
did you find any solutions?
I noticed this with my speed mod kernel.
I found that if you pressed the button combo to go into recovery, let the phone first boot, let all the buttons off and press them again and so on until it boots into cwm recovery.
Worth a try!
Do this when in recorvery:
Install update.zip iy should be on the second slot. If not go to the market and install rom manager. Then there should be a option down the menu that says flash clockwork mod. Do that, boot into recorvery and install update.zip. U may need to install yhe update a few times. Then you should have clockworkmod
Sent from my GT-I9000 using xda premium
Hi all, I have the I9000 with stock (branded, h3g ita) firmware Froyo 2.2
I recently removed Ryanza OCLF and flashed Speedmod Kernel k13e in order to be able to use ROM manager and use custom ROMs... but there's my problem, if it is one...
When I enter Recovery Mode, it automatically opens ClockworkMod Recovery 2.5.1.0, that comes with Speedmod Kernel. So I thought to install ROM Manager, but when I launched it the app didn't find the CWM recovery version previously mentioned. So I said to flash CWM Recovery and he says that he has successfully downloaded it... and then he say that my current recovery is version 2.5.1.2
Then, I ask to reboot in recovery mode but what happens is that my phone reboots in the original recovery (android system 3e), it tries to run something (i think the update.zip) and fails... so I manually go into recovery mode (3 buttons combo) and it load CWM recovery version 2.5.1.0 (the one that cames with SpeedMod)
What am I doing wrong? Why ROM Manager launches 3e recovery? Is it because the 2.5.1.0 version of CWM rec has became the "default" recovery (the one automatically launched with the 3 buttons combo)?
Now i have tried installing cwm through rom manager and successfully installed it, now if I go into the recovery mode through rom manager it shows the new recovery but if I go into the recovery mode through the combo (volume up button home button and power button) it goes back into the old recovery ie dark core recovery, so that means I have two recoveries in my sgs? Please help, thanks in advance
uninstall rom manager i read somewhere it doesnt work verywell .
ok, then please tell that how can i update this dark core recovery to the latest cwm recovery???
Installing CWM-recovery with Rommanager doesn´t work with the SGS. You have to flashe another Kernel which already includes the Clockworkmodrecovery I don´t know which CWM-Version the DarkCore has but i tried different Kernels an they all had Version 3. If you are on a Gingerbread Stockrom you can try flashing the Semaphore Kernel(Root+a lot of different Improvements). This one I had for a long time. I think it included CWM V 3. Now I'm on Teamhacksungs ICS and I have V5
i am using darky's rom 10.2 and i have to shift to cm7.1 so thats why i have to update my recovery to cwm latest... didn't know how to flash kernel in my phone, coz my friend did all that, and i am a noob
Can anyone help link me or teach me how to set up my phone to get into Clockwork Mod Recovery mode? whenever i try to reboot into Clockwork, it just boots into 3e recovery. I have an AT&T Samsung Captivate with stock 2.3.5 Gingerbread rooted and i have already flashed the latest version of ClockworkMod Recovery (2.5.1.2)
I want to overclock my captivate but i cant unless i can get ClockworkMod Recovery to work
Try flashing a rom with CWM already baked into it.
And PLEASE DO NOT use ROM Manager. It doesn't work on the Captivate.
Sent from my SGH-I897 using XDA
argonarcel said:
Can anyone help link me or teach me how to set up my phone to get into Clockwork Mod Recovery mode? whenever i try to reboot into Clockwork, it just boots into 3e recovery. I have an AT&T Samsung Captivate with stock 2.3.5 Gingerbread rooted and i have already flashed the latest version of ClockworkMod Recovery (2.5.1.2)
I want to overclock my captivate but i cant unless i can get ClockworkMod Recovery to work
Click to expand...
Click to collapse
FFS... you are using rom manager.. it hasnt supported captivate since 2.1 eclair.
2.5 clockwork is nowhere near the latest. at version 5 now.
and when rom manager used to work, you boot into 3e recovery then select install update.zip TWICE. (every time)
THEN you will boot into CWM.
**but you arent on android 2.1 so it will error out. then you are going to create another thread for a question that has been answered a million times already.
why do you need clockwork to overclock your phone??? (you dont)
might want to learn what stickies are and go read them for a few days before you F%%% up your phone predominantly. read the new user guide while you are at it.
http://forum.xda-developers.com/showthread.php?t=762171
this is what i am trying to do. I just got into ClockworkMod Recovery somehow but now i cant get out. It keeps looping between the at&t screen and CWM
Any suggestions? or should i reflash the stock rom for 2.3
august 2010... do you think that works on gingerbread when it was released before froyo was released??
i told you to read before you **** up your phone. are we going to listen now?
http://forum.xda-developers.com/showthread.php?t=1294477
flash this kernel .tar with odin
or in CWM (now) go to Mounts and Storage > Mount USB > (plug phone into PC)
copy over the .zip kernel from the thread, then unmount > back > flash zip from sdcard > choose corn kernel.zip
In odin, do i flash as PDA, Bootloader, etc?
im a bit new to this, so i dont no all these fancy pancy stuff
argonarcel said:
In odin, do i flash as PDA, Bootloader, etc?
im a bit new to this, so i dont no all these fancy pancy stuff
Click to expand...
Click to collapse
if you are flashing a kernel then it will go in PDA section but if you are flashing stock 2.3 fw then all the files will go to their respective places
Should I use this link for Captivate with 2.3.4?
Hi,
You told a guy who was trying to get clockwordmod recovery on his captivate, to use this:
[KERNEL][KK4][1/28/11] Corn Kernel v7.06 from Source (OC, BLN, Voodoo Sound, etc.)
Should I also take that advice? I want to put AOKP on the phone, but I have to get clockwork on there first and the normal way doesn't work because of the 3e recovery unsigned business. Thank you much for your expertise and for being a great help to everybody.
-Bob
TRusselo said:
http://forum.xda-developers.com/showthread.php?t=1294477
flash this kernel .tar with odin
or in CWM (now) go to Mounts and Storage > Mount USB > (plug phone into PC)
copy over the .zip kernel from the thread, then unmount > back > flash zip from sdcard > choose corn kernel.zip
Click to expand...
Click to collapse
(sorry for my English )
the thing is that my Samsung S wont starts ,when i click the power button its starts in CWM RECOVERY and when i press "reboot system now" it enters a boot loop (the logo keeps running over and over and the phone)
before this happened i originally had the stock ROM of my cellular carrier (2.3.3
then i decided to install another rom and kernel (cyanogenmod 10) so i installed first a clean stock rom (2.3.6) via odin
and then the cyanogenmod rom and kernel (up to now its all fine)
after that i wanted to change and install other rom so i installed again the clean stock rom 2.3.6 via odin...and from then it started to boot loop.
i thought that if i will install the kernel again it will be OK ,but it wont..
and now im in the situation that i have described above..
help SOMEONE please=]
LCPD said:
(sorry for my English )
the thing is that my Samsung S wont starts ,when i click the power button its starts in CWM RECOVERY and when i press "reboot system now" it enters a boot loop (the logo keeps running over and over and the phone)
before this happened i originally had the stock ROM of my cellular carrier (2.3.3
then i decided to install another rom and kernel (cyanogenmod 10) so i installed first a clean stock rom (2.3.6) via odin
and then the cyanogenmod rom and kernel (up to now its all fine)
after that i wanted to change and install other rom so i installed again the clean stock rom 2.3.6 via odin...and from then it started to boot loop.
i thought that if i will install the kernel again it will be OK ,but it wont..
and now im in the situation that i have described above..
help SOMEONE please=]
Click to expand...
Click to collapse
it is because the latest CM10 is based on a different partitioning layout than the stock one.. after flashing CM10 once when you go in a boot loop.. go to CWM recovery by using the three button combo and flash CM10 again.. . this time your rom will boot:good:
replay
ishangoyal said:
it is because the latest CM10 is based on a different partitioning layout than the stock one.. after flashing CM10 once when you go in a boot loop.. go to CWM recovery by using the three button combo and flash CM10 again.. . this time your rom will boot:good:
Click to expand...
Click to collapse
I installed the kernel and then the stock rom again but now its just bootlooping without getting load up to CWM recovery
so how can i get into CWM recovery????
(i tried VolumeUP+HOME+POWER but it just get into regular recovery...)
pull out your battery for a couple of minutes then replace battery
;hold three button forever or until it goes into recovery if that doesnt work
reflash through odin and do it again or check out darkyrom 10. re this gets flashed through odin
LCPD said:
I installed the kernel and then the stock rom again but now its just bootlooping without getting load up to CWM recovery
so how can i get into CWM recovery????
(i tried VolumeUP+HOME+POWER but it just get into regular recovery...)
Click to expand...
Click to collapse
flash darkyrom 10.2 Resurrection edition using odin.. this will give you a GB rom with root
flash CM10 through CWM recovery
reboot.. (you may not be able to boot as of now)
go to CWM recovery again using 3 button combo
flash CM10 again
reboot
this should do the trick
THANK YOU TWO
the Darkys rom 10.2 re was great --- it starts now hahah
i Will try now another rom (not cyagonmod but PilotX)
thank you very muchhhhhhhhhhhhhhhhhhhhhhhhhhhhhh