GT-P1000T - Galaxy Tab Q&A, Help & Troubleshooting

Hi all..
I just recently bought an unlocked Telstra galaxy tab..
Well..yes i am a noob..
That's why i'm asking..!!
What is this supposed to means?
PDA : P1000TDVJJ3
PHONE : P1000TDVJJ3
CSC : P1000TDVTTELJJ4
What is the connecrion of those above with the ROM's or Kernel? (i see alot of post that mentioned jj*,xx, etc..
Hope someone would be realy kind to help..
Thx in advance
Sent from my GT-P1000T using XDA Premium App

PDA : P1000TDVJJ3
PHONE : P1000TDVJJ3
CSC : P1000TDVTTELJJ4
Hello,
Since we are in australia and using P1000T, that is the firmware. Your firmware is JJ3.
Now, from here you can:
Stay stock (leave it at that)
Get custom Rom (overcome, etc)
If you want custom rom, look in the galaxy tab android development and follow the instructions to the letter to avoid bricking your tab.
It is normally advisable to flash your rom to roto's rom first before you get a custom rom. Roto's rom: roto jmi or roto jme, just search the development section.

I flashed 2 P1000t's straight to gingerbread with no problems... The bootloader doesn't need to be patched. Follow the instructions in the overcome thread - http://forum.xda-developers.com/attachment.php?attachmentid=596770&d=1305467639 or these instructions & Links on this thread - http://forum.xda-developers.com/showthread.php?p=13781955
Just remember, You don't need to flash the modem.bin part, just untick phone in ODIN. This allows you to keep the original Telstra radio...
Cheers, and happy flashing...

Ok bloke so two questions if you can please help. What is the best way to backup the existing stock to restore back to in case i screw it. Also when you say you went straight to gingerbread, which gingerbread rom did you use that was successful.
Did you use/have you heard of the Euro Italian one that is floating around the traps?

OK, here's stock Telstra firmware and radio - http://forum.xda-developers.com/showthread.php?t=971870
Read about this on Sarsippius thread... Big thankyou, Sarsippius, for this...
You MUST have AT LEAST 50% battery or you may end up with a brick. The tab doesn't charge during the flashing process so if you have low battery it will be sucked dryt pretty quick. Flashing seems to use a bit of power...
Next, I flashed this - http://forum.xda-developers.com/showthread.php?t=1073854 , thankyou Chainfire...
You need to follow the steps EXACTLY (if you want pictures go to the overcome thread and get his flashing manual, though there a re a few files named different and he doesn't need to flash the dbdata.tar file after the 1st flash...I also flashed the CF-Root V3.2 afterwards using ODIN....
Flashed 3 times using ODIN. Now have stock gingerbread and CWM on tab...
You can use the modem.bin file from the stock rom to keep the Telstra modem...
Takes about 10 - 15 minutes , go slow, read each step and DON'T skip ahead or you will come a cropper...
Remember, you can ALWAYS flash back to stock through ODIN as long as it recognises your tab....
I then flashed the Overcome rom V2.0.0 RC1 using CWM...
Happy Flashing....

ok..
i just manage to root GT-P1000T with chainfire thingy..(can't remember the name)
i fire up root explorer..and also installed bootloader patch - as per suggestion i found in xda (it says that mine are safe)
does it realy means that i realy could flash my dev with any firmware??
Sent from my GT-P1000T using XDA Premium App

You have the same Tab as I do, yes you can flash any gsm or european rom... DON'T flash the cdma roms as they are different from my understanding, could be wrong...
Look at my post above if you want to flash to gingerbread... I know that works...
Cheers...

ultramag69 said:
You have the same Tab as I do, yes you can flash any gsm or european rom... DON'T flash the cdma roms as they are different from my understanding, could be wrong...
Look at my post above if you want to flash to gingerbread... I know that works...
Cheers...
Click to expand...
Click to collapse
thanx for your help mate..
very helpfull indeed..
Sent from my GT-P1000T using XDA Premium App

Related

[Q] Q: How to root my new SGS 2.2

Hi everyone I have seached the forum and found some threats on this subject, but nothing that helped me.
PDA: I9000XWJPF
PHONE: I9000XXJPP
CSC: I9000TDCJP3
And my revovery is e3
I have tried One Click Root from XDA and z4root.
The One Click Root gives me the Verification error and the z4root just stalls..
Please help me. I want to apply lagfix and custom roms.
Jess Pedersen
move this to Q&A...
*facepalm*
you didn't read enough. There is TONS of info on how to root the Galaxy S.
First of all i suggest you change upgrade to a more recent ROM, such as JPY. Go to the General Section and a thread for JPY will be there, you can get Odin in that thread too or from the link in my sig. To root, all you need is Odin v1.7 and CF-Root, the thread is here: [21.12.2010][CF-Root v1.3] JPH/K/6/M/A/O/U/X/Y - su+busybox+2e, CWM compat!
You can't have 3e Recovery, CF-root will give you 2e.
OR you could simply flash a custom ROM and you'll have root pre-installed.
MAMBO04 said:
*facepalm*
you didn't read enough. There is TONS of info on how to root the Galaxy S.
First of all i suggest you change upgrade to a more recent ROM, such as JPY. Go to the General Section and a thread for JPY will be there, you can get Odin in that thread too or from the link in my sig. To root, all you need is Odin v1.7 and CF-Root, the thread is here: [21.12.2010][CF-Root v1.3] JPH/K/6/M/A/O/U/X/Y - su+busybox+2e, CWM compat!
You can't have 3e Recovery, CF-root will give you 2e.
OR you could simply flash a custom ROM and you'll have root pre-installed.
Click to expand...
Click to collapse
I saw that thread but i dont know witch file to download whit my fw specifications
Jess
It doesn't matter what firmware you have before, the only thing that does matter is the CSC, which contains countries' specific provider APN's etc, but it'll have the EU CSC so you should be fine. Get Odin v1.7 and flash JPY over, and then you can flash CF-Root or a Kernel like Hardcore's, to get Clockworkmod as well, in order to flash a custom ROM.
So as it is now i just use odin and flash lets say DocRom XXJPX ?
4700pedersen said:
So as it is now i just use odin and flash lets say DocRom XXJPX ?
Click to expand...
Click to collapse
Would be better to flash stock JPY, use CF-Root and then flash Doc/Darky ROM.
Can you point me a link for such fw? The one that fit my current fw.
Sent from my GT-I9000 using XDA App
Shall i flash all the files? pda phone and so on?
Sent from my GT-I9000 using XDA App
Guy don't flash the JPY if you want to use GPS. After I flashed it on my German Galaxy S. It takes hours to fix the GPS and then you just get an accuracy (do I write it right?) of around 100 meters. Better use the JPX with JPA WiFi drivers.
Sent from my GT-I9000 using XDA App
Link? And am i still going to flash all files?
Sent from my GT-I9000 using XDA App
Lets see if we can complicate this further for this poor guy.
An easier approach if you don't want to touch your firmware is to flash a modified kernel. For example SpeedMod will give you root as well as other goodies (2e recovery, clockwork recovery, etc).
http://forum.xda-developers.com/showthread.php?t=822756
Download and flash it using ODIN (put the file into the PDA box).
This was what i was lookning for and after i have done this i can use costom roms with clockwork?
Sent from my GT-I9000 using XDA App
4700pedersen said:
This was what i was lookning for and after i have done this i can use costom roms with clockwork?
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Sure, if that's what you'd like to do.
MAMBO04 said:
*facepalm*
you didn't read enough. There is TONS of info on how to root the Galaxy S.
First of all i suggest you change upgrade to a more recent ROM, such as JPY. Go to the General Section and a thread for JPY will be there, you can get Odin in that thread too or from the link in my sig. To root, all you need is Odin v1.7 and CF-Root, the thread is here: [21.12.2010][CF-Root v1.3] JPH/K/6/M/A/O/U/X/Y - su+busybox+2e, CWM compat!
You can't have 3e Recovery, CF-root will give you 2e.
OR you could simply flash a custom ROM and you'll have root pre-installed.
Click to expand...
Click to collapse
After I upgraded my Froyo 2.2 from JPA to FROYO.DXJPE I9000DXJPB I couldnt root using z4root at all. What can I do? The upgrade fixed my GPS problems tho. But my SGS Lags now. Help please. It also says my Recovery is 3e.
Want to jump in too...
I'm also interested in Darky's but did a fine job bricking my phone recently when I tried to flash to another firmware. So I need something like an idiot's/tech bimbo's guide...
My phone is the I-9000 international, running on official froyo 2.2, not rooted. Can someone kindly spell out the steps of exactly what I need to do? I came across many sites with incomplete information or even conflicting sequences when using Odin, so I'm a little paranoid about bricking my phone again. TIA.

[q] darky's rom help samsung galaxy s gt-i9000

Ok so im keen on flashing this Darky's ROM because of its proposed battery life and speed compared to stock firmwares. I was wondering if people could give me links or advice as to what else I would need to flash at the same time so that I have optimum coverage for my provider (Optus- Australia). I'm on a stock Optus 2.1 eclair ROM.
Thanks!
Please, do some research instead of just asking questions. We're trying to prevent spamming of the same questions over and over. Look in the developers page, there's plenty of information there: http://forum.xda-developers.com/forumdisplay.php?f=665
I had done some research and had not found any solution specific to my carrier (Optus) apart from installing a Optus Modem. Could you tell me how I would install a Optus Modem?
because of its proposed battery life and speed compared to stock firmwares.
??????????????????????????????????????????
You would need to ask the developer of that rom what you need or read post in the OZ post .
Thats as well as reading Darky FAQs etc.
Better still i can point you to Opus modem in rom kitchin .
Build your own rom .
http://forum.xda-developers.com/showthread.php?t=817703&page=3592
http://romkitchen.org/sgs/?s=generator
jje
you dont need to flash an optus modem, however,it is highly recommended that you upgrade to 2.2 through kies or otherwise. other than that, you will need to be rooted with clock work mod. after that , just drag and drop the rom zip in to your phone, download the configuration app from the market and flash from there.
Whenever I flash a new darky version I normally flash his odin ressirection edition then use cwm to flash latest version hope that helps
Sent from my GT-I9000 using Tapatalk
rudeboy150 said:
Whenever I flash a new darky version I normally flash his odin ressirection edition then use cwm to flash latest version hope that helps
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
+1 and there is a forum full of help at http://www.darkyrom.com/community/index.php
hope this helps
Welcome to Darky's ROM!

[q] help required!!!!!!!!

Hey Peeps
I'm New Here. I Have A Sim Locked (O2) Samsung Galaxy S I9000
Model Number - GT-I9000
Firmware Version - 2.2.1
Baseband Version - I9000XXJPY
Kernel Version - 2.6.32.9 rootSEP-51#1
Build Number - Froyo.XXJPY
Could Someone Please Give Me A Detailed Tutorial As To How I Can Root My Phone.
I Would Also Like To Create Backup Of My Existing Rom And Would Like To Know If I Can Unroot And Restore Back To Original Factory Settings.
Many Thanks In Advance
http://forum.xda-developers.com/showthread.php?t=723596
Original only if you save your original rom .
jje
How do I do this jj. And do you have. A rooting guide
Sent from my GT-I9000 using XDA Premium App
You read all the FAQs quickly
Root search for file below and flash via Odin .
CF-Root-XW_XEE_JVB-v3.1-CWM3RFS
jje
Learn Before You Brick XDA rule one .
Is this a safe method. I tried to root using odin before. All went well except I had no signal on completion.
Sent from my GT-I9000 using XDA Premium App
Wait...
You're on JPY correct?
You need to flash a rooted JPY kernal.
yes i am on jpy
CF-Root-XX_XEU_JPY-v1.3-BusyBox-1.17.1.zip
Found in post #3, here.. http://forum.xda-developers.com/showthread.php?t=788108
could you give me a complete guide for my galaxy s electrotune like i said i tried once before using odin and i had no network signal upon completion
It's all in the link I posted. First post.
Read the Instructions(Long)
is this a good method and would i be guaranteed to get signal when i am finished..
ps is it worth rooting my galaxy s and can you recommend any good custom roms if i do
There are benefits to rooting.
If you follow those directions, you will have a fully functional phone.
As far as custom roms, i have used Doc's rom kitchen. That's about it. I can recommend that to you.
do i need an unlocked phone for rooting to work
some say yes some say no.
mine came unlocked so i didnt need to worry about that. anyway try this before you root:
http://forum.xda-developers.com/showthread.php?t=761045
The answer too that question was no. Lol.....
I'm rooted.
Thanks a lot peeps you have been a brilliant help. Now for some custom roms
Sent from my GT-I9000 using XDA Premium App
Good!
Have fun
Also,
Do your reading! Learn as much as you can.
Backup your /efs folder. You never know if your going to need to restore a backup.

[Q] Reverting back to stock.

Hello,
Recently I updated to doc's mod v11.1, but I want to revert my phone back to stock (just to learn). I want it to be exactly the same as when I received it. I bought my phone on december 2010 so I guess I'll need the Froyo 2.2.1 firmware. Some information:
It needs the European firmware including dutch language.
I need to revert CWM recovery again to stock recovery 2e/3e.
Anyone got some information on this and can give me the required information, because I am having trouble finding it. Like where to find the firmware (I read about samfirmware, but I can't find the appropiate firmware ;/) Thanks in advance!
Tbh information without the files is welcome too. All information is welcome since it can broaden my search. Thanks again
Sent from my GT-I9000 using Tapatalk
I've got stock kernel in my backups pile... can upload and then you can use it with GS kernel flasher. Can do it preferably by Dropbox.
As for un-rooting (if you want to lol) check out OneClickRoot or something like that by Shortfuse
Hi
Hey bro i read ur thread,, here i have a link to a video from youtube it says step by step how to do it,, ive done it also a few times. you have to make an account to the link that the video points.
sorry ive this account new, so i cant post links,, search on youtube for >>How to Flash A Galaxy S Phone back to Stock Froyo
from the account of > androidgalaxys
hope i helped you
Alright thanks a lot! I'll take a look at the video when I come home.
At ravelair does the stock rom contains Dutch settings etc... or not?
Sent from my GT-I9000 using Tapatalk
If you just install the stock rom with a wipe u can then choose dutch by language at the beginning. Im also from Dutch so ive done it also
Galaxy S
Alright thanks but can you tell me what version I need from samfirmware?
Sent from my GT-I9000 using Tapatalk
It depends on which one you want , if you want to go to Froyo then u can choose just the modem u were at, otherwise u can just do the latest European Gingerbread
Dr.Galaxy. said:
It depends on which one you want , if you want to go to Froyo then u can choose just the modem u were at, otherwise u can just do the latest European Gingerbread
Click to expand...
Click to collapse
I have no clue which modem I was on... This is more of a test if my phone ever breaks down I can flash it back to custom and send it in for warranty so... wouldn't really matter ^^ If I flash Froyo or Gingerbread right now I guess... the method is the same just a different file. Anyways what modem do you suggest?
aha okee,, well I use now the latest Gingerbread, it's very fast and stable... and it's officially released in the Netherlands, so you can flash that one
Alright thanks can you provide me with a link since I don't want to flash the wrong image :x. Thanks for all your help!
Dutch: Bedankt man
Sent from my GT-I9000 using Tapatalk
Noprobs bro, if you've an account on samfirmware, just log in and choose samsung galaxy s i9000, there you can choose the European version from the beginning till rom 2.3.3 latest
Dutch Geen Dank ahah
Alright thanks. But the guide says I need 3 files... a CSC, PHONE and PDA. I can only find 1 file.. do I need to flash that one without the repartition checked?
hmm, you can flash back to 2.2.1 or JVB that has three files with 512 pit file and repartition, and then after that 2.3.3 jvh without re partition..
Dr.Galaxy. said:
hmm, you can flash back to 2.2.1 or JVB that has three files with 512 pit file and repartition, and then after that 2.3.3 jvh without re partition..
Click to expand...
Click to collapse
I already downloaded a 2.2.1 version and it contains 1 file.. not three... so that's kinda weird... It's 2.2.1 JPY and then I'll flash to doc's rom (which is JPY based) again....
I downloaded this one:
I9000XXJPY ## from this link:http://www.samfirmware.com/WEBPROTECT-i9000.htm
Do I need that one or another one? Thanks!
I just found this topic: http://forum.xda-developers.com/showthread.php?t=790686 is this also a legit way to do it ? Thx (by only doing the first section ofcourse)
You can download this one >>http://hotfile.com/dl/114645023/5ea002a/PDA_I9000XWJVB_-_PHONE_I9000XXJVK_-_CSC_I9000XEEJV3.rar.html
it has three files, flash it with 512 pit file plus repartition.
Alright thanks a lot! This just leaves one question will this also turn my ClockWorkMod in to recovery 2e? Or do I still need to do it manually?
Just flash katest K13c speedmod kernel over the JVH modem the latest gingerbread then you have it also rooted and it works fine
Sent from my GT-I9000 using XDA Premium App
Dr.Galaxy. said:
Just flash katest K13c speedmod kernel over the JVH modem the latest gingerbread then you have it also rooted and it works fine
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
I'm flashing to JVK, since doc's runs on JVK too for now.... Might flash to JVH later when he releases a non beta JVH. But what do you mean? What will it do ? Anyways I'm going to try tomorrow
Oww oke,, no i thought you wanted to flash the latest gingerbread,, never mind ihope you now know what to do .. wish ya best luck aha
Sent from my GT-I9000 using XDA Premium App

How to Revert back to Galaxy S original firmware???

Hey guys, i installed Brightside Evolution Firmware a few days back, but it isn,t working well and wanted to revert back to the Original stock ROM of GalaxyS GTI9000. DDJ froyo, Which is the safest to get back my original firmware??????????
thanx in advance!!!!
I think you just have to flash the old firmware with odin. Just search for a tutorial for the firmware you want. Maybe i misunderstood you.
kuchen123 said:
I think you just have to flash the old firmware with odin. Just search for a tutorial for the firmware you want. Maybe i misunderstood you.
Click to expand...
Click to collapse
I am having problems with flashing the firmware with Odin. I almost bricked my phone the last time and i don't want to brick my phone again, so can you point me in the correct direction, buddy????
dont panic..just go and flash any of 2.3.6 official rom. go for xxjvk. search this forum for official roms and you can even find video on youtube for correct flashing.
hope this helps
Sent from my GT-I9000 using xda app-developers app
Hey
Goto sammobile.com
Signup there and download the firmware available in ur county...
Also download flash programs and flash guide...its preety simple..
Hopes this helped..
Cheers
Sent from my GT-I9000 using xda app-developers app
Odin is not that dangerous :silly: You just have to look that you put the files on the right place and then just dont touch the phone while flashing. Then it is quite safe Just search for a tutorial.
Visit - Samsung Galaxy S GT-I9000 - Flashing to Original ROM : https://www.fixmystuff.in/FMS_Forum/threads/samsung-galaxy-s-gt-i9000-flashing-to-original-rom.46/
You can try to flash TeamwinRecovery/CWM with stock recovery than you just copy the stockrom to your sd card an flash it with the TWR/CWM... Afterwards you just flash the stock recovery again with TWR/CWM and you've finished without odin I hope it really works for sgs, cause i've tested that only with sgs plus
Stock Firmware thread
Here you go buddy, head over to this thread, they have a large list of stock ROMs, just choose the one that matches your region and flash it using Odin
Make sure you read the instructions in the OP.
Thread link - http://forum.xda-developers.com/showthread.php?t=1102881
Lord_Santa said:
Here you go buddy, head over to this thread, they have a large list of stock ROMs, just choose the one that matches your region and flash it using Odin
Make sure you read the instructions in the OP.
Thread link - http://forum.xda-developers.com/showthread.php?t=1102881
Click to expand...
Click to collapse
flash froyo
http://www.androidauthority.com/galaxy-s-gt-i9000-gingerbread-xwjw1-firmware-52955/
Follow instructions...
I'm not advertising the website - Just helping another member as it had helped me before
raj.bhakte said:
Hey guys, i installed Brightside Evolution Firmware a few days back, but it isn,t working well and wanted to revert back to the Original stock ROM of GalaxyS GTI9000. DDJ froyo, Which is the safest to get back my original firmware??????????
thanx in advance!!!!
Click to expand...
Click to collapse
All these other people posted links for instructions and stuff to alternate websites.
If you still need help, use the xDa written guide on flashing the stock firmware for your device.
http://forum.xda-developers.com/showthread.php?t=2261573
That link has AT&T provided, search the forums for the carrier/model GS4 you have and download the stock firmware.

Categories

Resources