Database Develop

[Q] My SGS i9000 seems to be dead. Please help me :'/

Alright
First of all i would like to say that im a completly noob in android OS and that i possiblely have done something idiotic!
So.. was i getting annoyed by a slow phone (have voodoo lagfix installed and set to be ON. It seems to work like ****!)
I rebooted into recovery mode and entered advanced settings and i was curios about the partition setting.
Then i picked "partition" and set it be on "4096MB" and at last i picked it to be "ON"
I finished it and reboot the phone.
Now i only getting the startup logo and nothing happens.
I have the 3 button fix installed to be sure i can get into recovery mode again, and i have tested it and it WAS working.
Now it does not work with the Vol up+Home+Power button combination.
I can get 3 different screens like the startup logo, the download mode and the battery charging logo, which not showing any sign on charging.
instead it show the loading circle, frozen on the charging logo.
So what can i do ? - I really really hope there is a solution on this huge problem, because it is worthless now and i only got this phone less the a month.
Thank you.

You'll likely need to flash back to your stock firmware and start over (meaning you loose all data on your internal memory).
Do you know how to use odin? Do you know where to find your stock firmware? I'm on my phone right notes so can't provide any links but you can check the reference guide thread in the i9000 general forum (it's one of the stickied threads) on how to flash firmwares. You can find your stock firmware on http://samfirmware.com

[Help]Milestone keeps repeating android boot!

So right now, my phone keeps on getting stuck at the 'android' word bootscreen. It keeps repeating and seems to go on forever! Someone please help me! I heard its due to rooting! Can anyone confirm this?

What did you do? I tried once to install aps 2 card and the phone stood in android screen about 20 min
Anyway if it doesn't start. Flash new android: nand restore or sbf
.
Sent from my Milestone using Tapatalk

Finally somebody replied back. Its been going on for days, I've removed the battery, placed it back, same thing.
Also, sorry but I have no idea how to flash something. How do I do it? And it doesn't even go past it.

I should spend on time in this sub-forum.
If you have flash a custom ROM then just reflash it or try another ROM.
It's highly, highly unlikely that your phone it breaked so don't worry about.

I have never flashed a custom rom. I don't even know how to flash in the first place.

turn off hp.try to hold up-dpad(towards screen) button and switch on your milestone.
then you see black screen written Bootloader.
battery OK.
OK to program
connect USB
data cable.
if you can go into this screen, then u can start to learn to flash vulnerable recovery.
and ready to install custom room.
google around on how to instal vulnerable recovery for milestone .

under18 said:
turn off hp.try to hold up-dpad(towards screen) button and switch on your milestone.
then you see black screen written Bootloader.
battery OK.
OK to program
connect USB
data cable.
if you can go into this screen, then u can start to learn to flash vulnerable recovery.
and ready to install custom room.
google around on how to instal vulnerable recovery for milestone .
Click to expand...
Click to collapse
Yep, I can go into it. But I checked, and can't find how to install a vulnerable recovery. Any help?

My site is down atm, but this may help;
http://forum.xda-developers.com/showthread.php?t=932196

shut down phone ->hold down hard keyboard x key and power button->when M logo appears release power button but keep pressing x key until recovery mode shows up
there is an option for clearing data/factory reset
you'll loose everything but it propably fix the problem

Including my contacts?

ray243 said:
Including my contacts?
Click to expand...
Click to collapse
your contacts if you have chosen it will be at your Gmail account and they will be restored.

[q] need help! Black screen on my verizon galaxy tab 7

I tried a flash and think i messed my tab...now its just a black screen with a faint light in the background like its on but its no images.......my battery icon pops up then distorts away and thats it ....can get into download mode but not recovery.....tried holding all 3 buttons got this lil android dude in the corner with a sign sayin something about power reset but cant select nothing......help me please......

Put it in d/l mode and flash one of the stock roms with Heimdall.
D

i tried a stock flash with heimdall it flashed successfully but i still get the SAMSUNG logo that flashes and go away,buttons light up at the bottom,can go in download mode but not reboot mode,phone stay on with a faint light ,so i assume that its on somehow.....help

Did you follow this exactly?
http://forum.xda-developers.com/showthread.php?t=967175
One thing I missed here before was to wipe data and cache. Otherwise I go into boot loop.

how to get recovery mode
i cant wipe nothing because i cant get to recovery,just download mode

done it step by step
i followed evrything it flashed successfully but when it rebooted i turned off.and tried recovery but nothing......

chubbyflood said:
i followed evrything it flashed successfully but when it rebooted i turned off.and tried recovery but nothing......
Click to expand...
Click to collapse
Use UnBrickable Mod
http://forum.xda-developers.com/showthread.php?t=1341753

Although you get a black screen on boot, it might still be working....
Chubbyflood,
If you are in the same situation as I am then the tab is still working, you are just getting black screen on boot up. It played tricks on me for ages when I was first rooting by tablet; but it turned out it is just the boot up screen that isn't showing.
This is my situation:
-Press and hold Power button to turn on.
-I see the Galaxy Tab / Samsung initial boot image for about 1 second, and also hear the "boot chime"
-Then the screen goes completely blank (but you can tell it is still on with a little light showing.
-The four "hard button" lights will light up briefly a couple times
-Wait approximately 30 seconds to a minute (to be safe and give the tablet time to boot up - it is actually booting up)
-Tab the Power button once, to turn the tablet off (now the screen is clearly off)
-Tab the Power button again, and the tablet will be up and running as normal.
I am guessing the boot animation / images are failing in some way, but the tablet is booting up as normal.
I've just learned to live with it, because I haven't had a chance to figure out what's going on, but it honestly took me a good hour or so, and a few (unnecessary) flashes, before I realized the thing was up and running fine, it just need to have the button pressed on and off.
One final thing to mention; don't have the tablet plugged into anything. I seem to remember leaving it plugged into the PC didn't help (I think).
Hope that makes sense.
Cheers
Ed.

Has your situation been resolved?
I am in the same boat. What I have done to temporarily fix this was to Flash a ROM that uses Hemdall and it will boot as flukebu stated but only with the Galaxy Cubed ROM.
I cannot get the factory files to boot as you have stated.
I have continually tried to return to stock using the files provided on this forum and all "unbrick" posts.
While flashing the stock images everything completes and works well. The device reboots and the Samsung Splash screen appears. Once it appears it disappears and scrambles the screen. I believe it then goes into a bootloop which easily enough I could access factory recovery to correct but when I do attempt to access factory recovery the screen is as posted above (black but illuminated).
Once I flashed Galaxy Cubed ROM and it booted I hit the power button and the locksreen appeared. I can tell you I was excited but there are some issues with that ROM I have not tried to correct yet because my main goal is to return to stock.
Even with this ROM working correctly I have attempted to access CWM once installed to complete a Data Wipe and that does not show up either.
I would really like to find a solution to this I want to return to stock and not have this custom ROM running.

Juiced_RL said:
Has your situation been resolved?
I am in the same boat. What I have done to temporarily fix this was to Flash a ROM that uses Hemdall and it will boot as flukebu stated but only with the Galaxy Cubed ROM.
I cannot get the factory files to boot as you have stated.
I have continually tried to return to stock using the files provided on this forum and all "unbrick" posts.
While flashing the stock images everything completes and works well. The device reboots and the Samsung Splash screen appears. Once it appears it disappears and scrambles the screen. I believe it then goes into a bootloop which easily enough I could access factory recovery to correct but when I do attempt to access factory recovery the screen is as posted above (black but illuminated).
Once I flashed Galaxy Cubed ROM and it booted I hit the power button and the locksreen appeared. I can tell you I was excited but there are some issues with that ROM I have not tried to correct yet because my main goal is to return to stock.
Even with this ROM working correctly I have attempted to access CWM once installed to complete a Data Wipe and that does not show up either.
I would really like to find a solution to this I want to return to stock and not have this custom ROM running.
Click to expand...
Click to collapse
Have you found a resolution to this? Mine tab is doing the exact same thing as yours after the cubed rom.

Cannot Access CWM Recovery Mod

[SOLVED -- Read my last post]
Posting on forum was my last resource, but I've tried literately almost everything I can possible find.
I already bricked my phone and had to unbrick, do everything (update firmware etc) all over again.
I am at a point where I am afraid to do something new to my phone now without knowing what they are...
Please bare with me, I am not familiar with exactly what flashing is or whatnot, I just followed the instructions and got where I am....
K, recently I decided to wipe my phone CLEAN and update to new CyanogenMod 9 from factory mode.
So, I have Captivate, I897. It was ECLARE with 2.1 firmware.
I have updated to 2.3.5 (Gingerbread [I897UCKJ2]), Rooted.
I had to Flash BACK to KK4_stock_kernel.tar for me to use WIFI again because I had issue after Rooting my phone, I couldnt access the WIFI.
I installed Clockwork mod (Free version).
My goal is to install CyanogenMod 9, and part of the process requires me to enter the CMW Recovery Mod.
I dont even know what this looks like, but all I know is whenever I boot my phone, after the AT&T logo animation it seems to go into this "messed up" screen, where as if my phone is broken. Stays there for 3 seconds and then continues to boot back to its OS.
In ROM manager, it says Flash ClockworkMod Recovery (You must have the clockworkmod recovery installed to flash and restore ROMs!)
Another option within ROM manager is, Reboot into Recovery (Boot into Recovery mode for manual management.), which if I do access it, it takes me back to that AT&T logo animation and that "messed up" screen again, but this time it stays there. Where all kinds of colored pixels are on my screen as if my screen is broken. It will only continue to boot back to my OS if I press power button or some sort.
Im guessing that's my Recovery Mod, which my phone for some reason cannot see?
So I tried "Download ROM (Upgrade to ROM Manager (premium) to access the full list of ROMs!", hoping this may cure that messed up screen effect, which I think is the Recovery Mod for all I know... When I click to install, it gives me Confirm Phone Models. None are my phone model for me to install.. (It only gives me Google Nexus S / Google Nexus S 4G / Samsung Epic4G / Samsung GalaxyS i9000).
Earlier, I was looking at this, http://forum.xda-developers.com/showthread.php?t=1127578
which is a way to fix recovery mod(?) But I have NO idea how to even install those files... Maybe not the .tar file but the other one.
Please help? Am I the only one experiencing this kind of problem? Couldnt find anywhere else on youtube / google / forum..
Thank you VERY much in advance, really appreciate it..
-Dan.

danroh said:
I had to Flash BACK to KK4_stock_kernel.tar for me to use WIFI again because I had issue after Rooting my phone, I couldnt access the WIFI.
-Dan.
Click to expand...
Click to collapse
This is your likely problem right here. The Kernel that is installed during the rooting process and typically when you install custom roms is what is responsible for installing and therefor you being able to access the CWM recovery. Flashing back to the stock kernel likely messed things up for you.
http://forum.xda-developers.com/showthread.php?t=1300843
Now if you follow that link it will take you to several one click options for flashing your phone to stock gingerbread but with a kernel containing CWM. Also keep in mind that it is possible you could have wifi issues if you've had them in the past, but if your goal is to get to CM9 just ignore the wifi for the time it shouldn't be an isuse in the end.

Hey OP,
See this.... TRusselo's Flashing Guide
Sent from my SAMSUNG-SGH-I897 using xda premium

You need Gingerbread bootloaders.

Thanks guys! I figured out the problem and solved it!
Like you guys said, I didnt have the bootloader. The gingerbread I installed was the no bootloader version. After reinstalling to the one with bootloader, I was able to access the recovery mod and that "rainbow screen" glitch was no more.
Thank you!

URGENT - Need help with S5570

Hey guys
Samsung Galaxy Mini 5570 is a pretty old device now and definitely not worth to talk about, but It's for my aunt and she said i HAVE to fix it otherwise she will kick my butt.
This is the whole story:
Phone was running a very low android version (it was 2.1 or something) that i could barely install apps on it (Just installed WhatsApp), I decided to upgrade it to a higher version so i could install other applications like Line and Telegram for her, so basically i had to flash CWM file first because it was required, I flashed it using this link:
http://www.droidthunder.com/root-install-clockworkmod-cwm-recovery-samsung-galaxy-minipop-gt-s5570/
They said flash the cwm file and factory reset your phone but i flashed the cwm file and rebooted my phone without factory reset, everything was working fine :good: but i decided to follow the instruction so i rebooted into the recovery mode and factory reseted my phone (by my phone i mean her phone, but i'm gonna say my phone instead) and guess what, it never booted up again. stuck on Samsung logo.
But i could go into the download and recovery mode, so basically i followed this instruction:
http://www.droidthunder.com/update-samsung-galaxy-minipop-gt-s5570-android-4-2-1-cyanogenmod-10-1/
which is from the same guy, I flashed it using recovery mode and flashed gapps too, everything went normal without any errors. So i rebooted my phone and ............
a black screen poped up, I was really worried because i couldn't boot my phone, nor could i go into the recovery or download mode. I don't know if i could or not but the only thing I'm getting right now is a black screen or a backlight.
The only thing that seems to be working is when i hold Power+Volume UP button, my laptop can detect my phone (as Samsung CDMA Technologies) but can not flash anything using Odin, it stucks on "setup connection" message. Nothing else is working, I tried:
Home+power+volume down
Home+power+volume down+volume up
Power+volume down
Power+home
etc
I also tried a hundred different ways like completely uninstalling the drivers (with or without kies) pulling battery out, try those key combination while battery is out and reinsert battery while holding them but nothing is working.
I found this article yesterday which is for unbricking the hard bricked phones, but ADB can not detect my phone:
http://www.engineerthink.com/blog/2015/11/how-to-unbrick-hard-bricked-android-phone/
Please help me guys, And do not suggest me to take it in Customer Service because i would if i could.
Thanks in advance