Related
i've tried to fix the dowload mode via the link
androidadvices.com/fix-download-mode-recovery-mode-bug-in-galaxy-s
but i accidently plugged out the usb cabel out of my PC.
Now i can turn on my phone but I can't do anything,
there's just an icon that my phone isn't connected to the PC,
and when i try to connect it nothing happens.
can someone please help me???
thanks
Have you tried turning it on in recovery?
henchy said:
i've tried to fix the dowload mode via the link
androidadvices.com/fix-download-mode-recovery-mode-bug-in-galaxy-s
but i accidently plugged out the usb cabel out of my PC.
Now i can turn on my phone but I can't do anything,
there's just an icon that my phone isn't connected to the PC,
and when i try to connect it nothing happens.
can someone please help me???
thanks
Click to expand...
Click to collapse
even the recovery mode doesn't work
the icon i described just flashes while i'm holding the buttons, nothing else happens...
I'm moving your post to the Samsung fora...you might get more help over there
What model do you have?
henchy said:
even the recovery mode doesn't work
the icon i described just flashes while i'm holding the buttons, nothing else happens...
Click to expand...
Click to collapse
M_T_M said:
I'm moving your post to the Samsung fora...you might get more help over there
What model do you have?
Click to expand...
Click to collapse
Samsung Captivate Galaxy S
Is the icon you have a triangle with an android Guy and a shovel? If so try remove battery remove sim.remove SD. Insert bettery and go back into download mode and re odin..what phone also
Sent from my SGH-I897 using XDA Premium App
Is this the icon?
If the icon is the one connexion posted, then it should be fixed if you build a jig. A jig is essentially 300k worth of resistors. You can research more on this subforum to find out more information about it
connexion2005 said:
Is this the icon?
Click to expand...
Click to collapse
yes, this is the icon!!
i will try with a jig, i hope this will help!
thanks a lot!
I had that icon after a soft brick trying to install GB, and my phone was actually in download mode. I opened Odin one click, plugged it in, and was able to flash back to stock. Then I got cocky and tried to install GB again, same symbol, different results. I was not able to save my phone until my jig arrived.
Moral of the story: phone!computer can sometimes be download mode, but not always, and keep a jig on hand just in case.
Sent from my Captivate running Cognition
I had that when trying to install GB the first time as well. Have you tried putting the phone into download mode via vol down/pwr?
If that doesnt work try holding vol up/vol down and plugging in the usb cable. While doing both the above mentioned and this make sure the phone is powered off first. Perform battery pull
If you can get it into download mode, use odin to flash back to stock jf6 and then retry. Best use would be odin oneclick search for it, its somewhere in here
if key combo does not work for you, the jig will help then ... try to build one yourself, or buy it on ebay (search for "micro usb jig").
I just recently flashed the 2.3.3 GB firmware from SamFirmware. It actually works quite nicely. I just recently encountered a power button issue and would like to flash back to stock before sending the phone in, but the problem I have is not being able to go into download mode. I'm not quite sure what the problem is. I have an ATT captivate, and have done it in the past before. When I turn the phone off, the phone will vibrate like it does in 2.2Froyo but the back light for the buttons will remain on(possibly until the battery dies). Every button trick I try only cycles through the att logo screen and when I have the phone plugged in it always shows the battery charging when the phone is off and plugged in. Regardless, I can get to recovery mode, but never download mode.
Any suggestions? Thanks.
You do know that download mode in GB (2.3.x) is Vol Down +pwr buton, right?
Assuming it turns on you can try adb commands. All else fails jig will force it in to download mode regardless.
cappysw10 said:
You do know that download mode in GB (2.3.x) is Vol Down +pwr buton, right?
Click to expand...
Click to collapse
Yea, and that's not working. I only get recovery mode every time.
cappysw10 said:
You do know that download mode in GB (2.3.x) is Vol Down +pwr buton, right?
Click to expand...
Click to collapse
Not true. I897 GB bootloaders Download mode combination is Vol up+Vol down+Insert PC connected USB cable. The combination you said is I9000 Bootloaders.
But i think the majority are on i9000 boot loaders.
True regardless OP didn't specify what bootloaders he is using, so just covering basics.
If all else fails, remove your battery, sim chip, microsd chip, then plug in your usb cable, hold vol up & vol down and put your battery in.
Should go right in to download mode.
the phone boots. Use adb.
install adb (although imo you should have done that BEFORE ever flashing your phone)
open a prompt
Change directories to where you have it installed.
Then enter the command:
adb reboot download
and you're dl mode.
Make sure you have usb debugging turned ON.
Or make/buy a jig.
Here's another problem, and I do thank you guys and gals greatly for helping me out. The computer recognizes my phone and the drivers when booted up normally, but in download mode the drivers fail to install or be read. Therefore, I cannot flash back to stock. I've tried uninstalling drivers and reinstalling manually on my computer and still nothing.
Jmurph3 said:
Here's another problem, and I do thank you guys and gals greatly for helping me out. The computer recognizes my phone and the drivers when booted up normally, but in download mode the drivers fail to install or be read. Therefore, I cannot flash back to stock. I've tried uninstalling drivers and reinstalling manually on my computer and still nothing.
Click to expand...
Click to collapse
had the same problem, download mode wouldnt get recognize by PC or odin and drivers fail to install. I decided to install mini kies and it installed drivers thru that and problem solved, download recognized and was able to flash to 2.1
CremeFraiche said:
had the same problem, download mode wouldnt get recognize by PC or odin and drivers fail to install. I decided to install mini kies and it installed drivers thru that and problem solved, download recognized and was able to flash to 2.1
Click to expand...
Click to collapse
Thanks! I'll be sure to try that when I get home. Have you had any problems with the GB 2.3.3 leak that came out few weeks ago or have you not tried it?
ive just used cognition only since it's release and like it so far
I read some tutorials here in the forum on how to root your phone! I was able to successfully perform. Until that point, my phone was still booting android 2.3.3 (ginger) that came from the factory.
Then I went into recovery mode and installed 5.0.2.6 ClockworkMod! Installed successfully too! Then I tried to install some roms modified for the S5830I, as read on the internet that the roms of them are compatible with the S5830C.
I tried the first version of the ICS lite and basic, the two images, when installed by clockwork gave no error messages in the terminal, but when you restart the machine could not boot the system.
I installed and booted each version of the ICS modificias separately. I tried other roms. gave some errors "gep.prop" because of non-compatibility with my model. In the end, tried to use the method with ODIN, but my phone can not boot the mod download! Yes, I tried all the tutorials!
I know I need to press the home button, power, volume down (...) I tried to use the ADB "adb reboot download", and also got no answer!! So ODIN does not detect my phone! Percebir also that the recovery mode always resets to a version e3 (I think it is the factory default recory) with this recovery can not seem to wipe the cache or data.
Really broke my phone? Why the hell i can get a good status of installation with the roms but can not boot them?
It's a classic
Yes you did break your phone, unless you try this last trick:
take out your battery
wait until your phone is completly uncharged internally (an hour or so)
go to a hot place like a radiator or somthing like that
do the "download mode trick" with the battery still out
put the battery in while still holding the buttons
repeate if it doesnt work
when you get the downloadmode, you are a lucky person. the rest you seem to know how it works... simply flash a new rom
I hope it works!
samsung galaxy ace unbrick clockworkmodace.zip
based on my experience, i unbrick my friends samsung galaxy ace gt-s5830i 2.3.6
or if you install clockwordmodace.zip, it will brick your galaxy ace..
first download odin 1.85
second download PDA zip file from this link
4shared.com/file/Ls2CAsHv/PDA.html?cau2=403tNull[/url]
instructions:
1. run odin,( run as administrator) right click on the exe file and choose run as administrator
2. while you device is off, plug your usb connector to your computer
3. hold volume up + volume down + power at the same time, wait for the battery charging logo appears, then wait for the battery logo disappear then unpress power botton then your phone will go into download mode and will be recognize by odin..
if Odin already recognize your device click on PDA and insert the PDA file you downloaded. then click start. dont change the setting in odin.
after that you successfully bring back life to your brick samsung galaxy ace.
Note: make sure you already installed samsung kies on your computer for USB issues. this will help your device to be recognize by odin.
Hope this will help you guys.. i already tested this procedure.
THANKS¡¡¡¡¡¡¡¡
edward_swit14 said:
based on my experience, i unbrick my friends samsung galaxy ace gt-s5830i 2.3.6
or if you install clockwordmodace.zip, it will brick your galaxy ace..
first download odin 1.85
second download PDA zip file from this link
4shared.com/file/Ls2CAsHv/PDA.html?cau2=403tNull[/url]
instructions:
1. run odin,( run as administrator) right click on the exe file and choose run as administrator
2. while you device is off, plug your usb connector to your computer
3. hold volume up + volume down + power at the same time, wait for the battery charging logo appears, then wait for the battery logo disappear then unpress power botton then your phone will go into download mode and will be recognize by odin..
if Odin already recognize your device click on PDA and insert the PDA file you downloaded. then click start. dont change the setting in odin.
after that you successfully bring back life to your brick samsung galaxy ace.
Note: make sure you already installed samsung kies on your computer for USB issues. this will help your device to be recognize by odin.
Hope this will help you guys.. i already tested this procedure.
Click to expand...
Click to collapse
MAN-...... YOURE FREAKING AWESOME..... (sorry for screaming) but your metod was the only one that worked for me....
seriouslly thanks a lot... (sorry for mi BAD english) i can´t thank you enough......
you´re awesome
phone not flashin!
edward_swit14 said:
based on my experience, i unbrick my friends samsung galaxy ace gt-s5830i 2.3.6
or if you install clockwordmodace.zip, it will brick your galaxy ace..
first download odin 1.85
second download PDA zip file from this link
4shared.com/file/Ls2CAsHv/PDA.html?cau2=403tNull[/url]
instructions:
1. run odin,( run as administrator) right click on the exe file and choose run as administrator
2. while you device is off, plug your usb connector to your computer
3. hold volume up + volume down + power at the same time, wait for the battery charging logo appears, then wait for the battery logo disappear then unpress power botton then your phone will go into download mode and will be recognize by odin..
if Odin already recognize your device click on PDA and insert the PDA file you downloaded. then click start. dont change the setting in odin.
after that you successfully bring back life to your brick samsung galaxy ace.
Note: make sure you already installed samsung kies on your computer for USB issues. this will help your device to be recognize by odin.
Hope this will help you guys.. i already tested this procedure.
Click to expand...
Click to collapse
REPLY:- the phone does get detected but once i open odin 4.38 n inser the ops n pacage file n den click start it says cant open serial com port.. wats tht suppose to mean?
ACE_95 said:
REPLY:- the phone does get detected but once i open odin 4.38 n inser the ops n pacage file n den click start it says cant open serial com port.. wats tht suppose to mean?[/Q
i'm trying to flash my galaxy ace gt s 5830....but i'm not able to get the mobile in download mode...
when i'm tryimg to get it in download mode by pressing vol down =+menu+power keys it getting black screen and displying wors like thik ' Downloading........'
can anyone help me plzzzzz
Click to expand...
Click to collapse
Hello I accidently went and flashed a s5570i rom into my s5570 and now my phone will not turn on,
or into download/recovery mode.
I have a question will a jig get me into download mode?
Thanks in advance
Also plugged usb in and was holding
Home + power + volume up
and odin detects it but the phone wont flash or turn on and there is nothing on the screen
PhaseCoder said:
Also plugged usb in and was holding
Home + power + volume up
and odin detects it but the phone wont flash or turn on and there is nothing on the screen
Click to expand...
Click to collapse
Download mode is home+power+vol down
Tapatalk 2-vel küldve az én GT-S5570-ről
Yea I know that, but it wont boot to recovery or download mode.
But when I press volume up home and power odin detects it
heyy, the problem already has a solution?
my phone S5570 also has the same problem, black screen, can not go into recovery mode or download mode.
but go to RAMDump (vol up + home + power) and connect it to my PC, my S5570 is detected by the PC and odin, but can not flashing my rom.
stuck in "Setup Connection" I know it because my phone is not in the download mode.
whether the USB JIG is the right solution?
sorry if my language is bad
PhaseCoder said:
Hello I accidently went and flashed a s5570i rom into my s5570 and now my phone will not turn on,
or into download/recovery mode.
I have a question will a jig get me into download mode?
Thanks in advance
Click to expand...
Click to collapse
(I think this set of steps works in these
conditions: Hard-brick, absolutely non-
responsive to any button combination.
Odin still recognizes the phone when
connected through USB port)
1.- Remove both the SIM card and de
microSD card.
2.- KEEP YOUR BATTERY REMOVED
3.- Apply the Download-mode button
combination (known by you all)
4.- WHILE HOLDING THE
COMBINATION, insert the battery, and
keep the buttons pressed untill you get
the download mode.
5.- Flash your phone with a valid
firmware through Odin (Preferebly,
have Odin prepared before doing this
trick).........
hit thanks if this helped you and others....
R: [Q] Hard bricked s5570
Henota11 said:
heyy, the problem already has a solution?
my phone S5570 also has the same problem, black screen, can not go into recovery mode or download mode.
but go to RAMDump (vol up + home + power) and connect it to my PC, my S5570 is detected by the PC and odin, but can not flashing my rom.
stuck in "Setup Connection" I know it because my phone is not in the download mode.
whether the USB JIG is the right solution?
sorry if my language is bad
Click to expand...
Click to collapse
Try to press power+home+vol down+vol up
It'll go to emergency download mode.
Need tester for your rom (Galaxy Mini)? Just pm me! Sent from my BlackdroidLie v1 (My Phone often lies with this rom..)
steexyl said:
Try to press power+home+vol down+vol up
It'll go to emergency download mode.
Need tester for your rom (Galaxy Mini)? Just pm me! Sent from my BlackdroidLie v1 (My Phone often lies with this rom..)
Click to expand...
Click to collapse
and then?
I do not see any change, only detected on my computer
but the screen stays black
Send it to Samsung to repair it or try USB jig
Sent from my GT-S5570 using xda premium
tried jig didnt work, sent it to samsung was back in 3 days fully working
TIP: say you were during a call and phone turned off wouldbnt turn back on. do not mention ROOt or anything else
sir
PhaseCoder said:
tried jig didnt work, sent it to samsung was back in 3 days fully working
TIP: say you were during a call and phone turned off wouldbnt turn back on. do not mention ROOt or anything else
Click to expand...
Click to collapse
how much did you pay ?
hard brick galaxy mini
my galaxy mini also hard brick cannot go to downloading mode or recovery mode .tried jsb jig also cannot any other solution ???????
Same problem.. only solution is bring to ur frend technician, an operation will conduct to ur problem, pay for only 300 pesos here in the Philippines
Sent from my GT-S5570 using xda app-developers app
uploaded wrong rom on galaxy mini s5570,
phone turns off and dead I think,
nothing was working,
I've JTAG the phone from my friend,
phone turns on and able to enter in downloading mode only,
i've uploaded froyo android it failed,
then I uploaded arm11 boot file,
now phone won't be able to enter in DOWNLOAD MODE or recovery mode,
phone turns on and screen went black cannot be able to enter in DOWNLOAD MODE or recovery,
when I connect it to pc with usb cable it automatically turns on and screen turns black,
will usb jig works for it to enter in DOWNLOAD MODE??
please reply me if possible
thanks and regards
Sent from my GT-N7100 using xda app-developers app
---------- Post added at 10:55 PM ---------- Previous post was at 10:42 PM ----------
uploaded wrong rom on galaxy mini s5570,
phone turns off and dead I think,
nothing was working,
I've JTAG the phone from my friend,
phone turns on and able to enter in downloading mode only,
i've uploaded froyo android it failed,
then I uploaded arm11 boot file,
now phone won't be able to enter in DOWNLOAD MODE or recovery mode,
phone turns on and screen went black cannot be able to enter in DOWNLOAD MODE or recovery,
when I connect it to pc with usb cable it automatically turns on and screen turns black,
Odin also won't detecting it
will usb jig works for it to enter in DOWNLOAD MODE??
please reply me if possible
thanks and regards
Sent from my GT-N7100 using xda app-developers app
Jtag it again then try to re install the firmware
Sent from my GT-S5570 using xda app-developers app
brick s5570
I have a Samsung mini S7750, in resetting to factory defaults boot.
Boot mode or recovery mode does not.Only works is a combination of "home + vol up + vol down" moves into some mode where it while Odin detects the two com ports, but nothing to do, Odin hangs on setup conection.
JIG does not work [resistor 301kohm].Display is black.
[cz eng dictionary]
PhaseCoder said:
Hello I accidently went and flashed a s5570i rom into my s5570 and now my phone will not turn on,
or into download/recovery mode.
I have a question will a jig get me into download mode?
Thanks in advance
Click to expand...
Click to collapse
Try the simple just "hold power+home". It'll be leads you to recovery mode, then you should flash the appropriate rom for s5570. Cchopefully help
Sent from my GT-S5570 using Tapatalk
Help please
Hi. My S5570 is hard bricked. Will not turn on in any way i try. Does not go on download or recovery mode. The USB Jig method does not work for me. (I tried with around 3) and I connected my phone to my laptop and help down power + home + vol up and it does not recognise my device but when i do power + home + vol up + vol down it recognises it. I then used Odin to recover it but I have tried over 50 times and it is always stuck on "Setup connection...". Can someone please help? I have already tried re-installing Samsung USB Drivers. Still not working. Please help and thanks!
Kailens said:
Hi. My S5570 is hard bricked. Will not turn on in any way i try. Does not go on download or recovery mode. The USB Jig method does not work for me. (I tried with around 3) and I connected my phone to my laptop and help down power + home + vol up and it does not recognise my device but when i do power + home + vol up + vol down it recognises it. I then used Odin to recover it but I have tried over 50 times and it is always stuck on "Setup connection...". Can someone please help? I have already tried re-installing Samsung USB Drivers. Still not working. Please help and thanks!
Click to expand...
Click to collapse
Only hold vol up+home+power and THEN connect it if download mode works. I mean if it's recognized by the computer, download mode has to work, there is no way. If it does, then flash a stock ROM.
Oh and also something: before doing this, pull out your sd card and even your sim card. The same thing happened to my phone and Odin could flash it after removing everything.
Kailens said:
Hi. My S5570 is hard bricked. Will not turn on in any way i try. Does not go on download or recovery mode. The USB Jig method does not work for me. (I tried with around 3) and I connected my phone to my laptop and help down power + home + vol up and it does not recognise my device but when i do power + home + vol up + vol down it recognises it. I then used Odin to recover it but I have tried over 50 times and it is always stuck on "Setup connection...". Can someone please help? I have already tried re-installing Samsung USB Drivers. Still not working. Please help and thanks!
Click to expand...
Click to collapse
There is another way that u can try:
(Asumming that samsung mobile drivers are installed, with no Samsung KIES... & odin running in the foreground.)
*Remove sim, sdcard & battery.
*Now connect ur phone(without battery) to pc via usb cable.
*Now press the usual download mode keys(volume down & home & power buttons) together without the battery.
*While still holding those three buttons, insert the battery.
At this point Odin should detect ur phone so that u can flash stock firmware.
U can try this atleast since u r left with no choice:sly:.
Good Luck..!!:thumbup:
Hope this helps...!!
Hi there, i want to ask some help to you. This is very sucks for me, when i need to communicate with my family and my friends, my phone was had a probelm. First probelm is my phone was bootloop, it was booted just until "Samsung Galaxy S III Mini" logo. Second probelm, after that bootloop, my phone was restarted and go back again to boot logo, and then restart again and go back again to boot logo, again and again continuosly until my battery was drain down. And the last probelm, after i found that probelm then i try to flash my phone to newest version firmware, when my phone enter to download mode and try to connected to my PC, it not recognized with my PC, indeed there's no notification that the device is not recognized (normally if you connect the device to PC and not recognized, will show notification "USB Not Recognized"). I try to connect again on Windows 7 (My PC was dual-booted Windows 10 and Windows 7), there's no changed, still not recognize and not showing notification. And then, an hour ago before i posted this post, i try to connect and flashing in my friends PC, but still not recognized. I think there's no probelm with my USB cable, when i use to charging, it still working.
And then i really really really need your solution, PLEASE help me, i dont have much money to repair my phone because i just have IDR 10000 (converted to USD is just $0,95) and my guarantee is expired. Soon i will face the National Exam and i dont want lost my focus to that. I hope i can get the best solution quickly. Thanks for your attention, sorry for my badly english. :crying::crying:
Hi
I had similar problem my solution was to download samsung mobile drivers for s3 mini.
Follow these steps
Download Drivers
Install Driver
Download and Install Odin 3.07
Download Original firmware it is on xda. Msg me and I send you link
Open ODIN select firmware in PDA
Turn Off Phone. Take Battery out
Hold Power Button and Down I think to get to download mode
Connect cable
Continue download mode
In odin it should show up com connected
In odin press start
Let it flash rom dont desconnect cable even when it finished.
Once completed turn on fone with cable inserted to pc until phone completely starts up to main menu
Msg me if you hv problem.
just a little side note....where did u get windows 10.......good luck with the phone
Hi whith model s3mimi you have i8190x or 8200? If 8190 do that:
1.Download drivers and Odin from novafusion.pl/downloads, there is section s3mini->extras and heres Drivers and Odin.
Download stock rom from sammobile or samsung-firmware for your specific model and location.
2.Install drivers, next unzip to any location Odin and downloaded rom, but in the same place both.
3.Take out battery and put in the phone, then push Vol- Home Power buttons until you see Download mode, then clik Vol+ to enter it.
4.Open Odin and select PDA and find unpacked stock rom then connect phone to usb. Make sure that ONLY Auto Reboot*and*F.Reset Time are selected.
Your pc find drivers and Odin show to you in first box in left corner info about port:comX, nevermind what number of Com but you must see info about Com port. Its important.
5.Pull button Start and wait few minutes. On finish your phone restart, you dont need to disconnect from pc. Now wait 5-8min, in this time you see only logo samsung and thats all. After logo you see configuration panel and voila.
If not see configuration screen after 8min, pull out batt, put in, go to recovery by Vol+ Home Power Buttons and clean cache, next do factory reset. Now might be work, but after restart you still wait max 8min until see configuration screen.
Sent from my GT-I8190 using XDA Free mobile app