Hey boys & girls
I've got a problem:
Every time when i flash a Sense Rom on my Nexus One everything is fine when i start it up. Network is fine and also Mobile Data is fine, but when press the sleep/wake button to lock the screen the mobile data dissapears
Then when i enter settings to turn it on again, it's not getting on
That happens to me on every Sense Rom (Kingdom v0.2, evil's NXSense, Modacos r24,..)
The APN Settings are correct.
I'm really pissed of because the Roms are great but they are useless for me without Mobile Data
My Phone:
Radio Update - 5.12.00.08
RA-passion-v2.2.1
HBoot 0.35.0017
Any suggestions?
What recovery are you using if your using clockwork 3.x I would change to either a previous version of clockwork (i.e. 2.5.1.4). And if your on Amon RA then I would try doing a temasek system wipe before flashing your ROM.
I'm using Amon RA-passion-v2.2.1.
What is a "temasek system wipe"?
When I flash a CM7 onto my nexus one there is no mobile data problem, only with these sense roms.
temasek wrote a script to do a more thorough wipe than the one normally performed through recovery...
Heres a copy of the script:
http://db.tt/fH1vZNM
Temasek system wipe is a .zip file that will wipe the system partition of the phone this will sometimes solve problems when flashing ROMs. Here is a link to the zip just flash it like any other zip http://www.mediafire.com/?7l9nadd9ekkp7ae
EDIT: You beat me to it danger
thanks guys! I will test it and let's see if it solves the problem
Edit: Does this also wipe battery stats, so that i have to calibrate my battery?
Ok i flashed the extremewipe.zip and then flashed a rom onto my nexus one. Now the phone reboots into the fastboot mode everytime a press "reboot phone" in the recovery menue. How can i fix that?
Sounds like it might be missing the boot partition. What firmware did you flash?
eViL's NXSense HD
Unfortunately, I am not familiar with Sense-based firmwares. Have you tried an alternate to see if it is limited to that particular one? Maybe try and flash CyanogenMod as I know that will work fine after using the Extreme Wipe.
Okay now I'm on CM7 and everything works! Is it possible that i need a froyo radio when i use this sense based roms?
Gingerbread works best with the 5.08 radio (found under Settings -> About phone -> Baseband (we take the two sets of numbers after the underscore "_"). I don't think Sense has any additional requirements with it.
I think the the ROM you flashed didn't contain anything for the /boot partition (or it just screwed up with the flash)... but that is just a guess.
So, I have to roll this thread up again.
Now I'm back on CM7 Nightly, everything works also data
And I think I tested all Sense Roms out there for the Nexus One and for me only KingX's Sense Rom and NexDesire were working.
But with these two, Bluetooth isn't working
On every other Sense Rom it is the same
I start the Rom and Data is there and after i press the sleep button to turn the display off, my mobile data dissapears, I have no clou what is wrong with my N1.
On all the Gingerbread Roms my mobile data works but the Sense Roms are killing it.
I just want to use a Sense Rom
Sorry for waking up the dead but I have the same issue. It seems to be an incompatibility between libhtc_ril.so in the rom with the radio that nexus one is running. Now, Im not sure how that could be generalized because many users have installed same roms that we tried and as well same radios and no issues with radio/data disconnecting when screen goes to sleep.
So, again, any bright mind cares to give a spoon of wisdom?
What are we missing?
Related
There seems to be a major issue with the 4.06 radio and my phone - every time I have tried to flash it (from both validated .img's and update.zips) my phone becomes extremely unstable afterwards.
It goes into booting loops, hangs at the X, when I get it to boot it crashes while using heavy 3G or WiFi data, reboots when plugged into USB and receiving a call and it becomes almost impossible to get into recovery mode etc, etc.
The only way to get back to a working phone is to revert to stock 4.04. I have tried 5 different times over the last 2 weeks now with the same results every time.
I am starting to wonder if it is a AT&T/Rogers N1 issue or something specific to my device. If it was my device I would think that flashing back to 4.04 would also cause problems but that is not the case. This makes me believe there is there maybe an incompatibility with the leaked Froyo radio.
Appreciate any thoughts/comments.
I'm not having that problem. I flashed Modaco's first FroYo repack with root and the new radio, and things have been fine. To be honest, the only thing I've noticed is that Bluetooth seems to sync a lot faster to the head unit in my car.
Did you do a complete wipe before you installed the update and what applications have you added that may not like the radio?
Edit to add: By the way, you guys have a kick-ass little HTC Magic up there. It may not be a Nexus One, but it more than holds it's own running cyanogen. I have an import that my wife is playing with. I really like it.
Have you tried the 4.6.00.12_7 radio as well ast the 4.6.00.2_2? The 12_7 is working flawlessly for me both on Froyo and on CM 5.0.8-derived ROMs.
I just verified my version - it's definitely the 4.6.00.12_7 Froyo radio firmware.
codesplice said:
Have you tried the 4.6.00.12_7 radio as well ast the 4.6.00.2_2? The 12_7 is working flawlessly for me both on Froyo and on CM 5.0.8-derived ROMs.
Click to expand...
Click to collapse
I tried the 12_7 last night and after flashing it using fastboot, my phone got stuck in a reboot loop. I could get back into fastboot and saw the new radio version on the screen but could not for the life of me get my phone to boot into either the rom or recovery mode - I pulled the battery, took out the SD card etc but nothing worked. This prevented me from flashing a ROM and I could not get into Recovery. After about an hour of trying, I managed to get the 4.04 radio flashed using fastboot and then my phone booted with no problems.
Previously, I tried the various Froyo builds and with no additional apps installed I would still get random roboots when using data via either 3G or WiFi - usually when I try to do something big like downloading/syncing a large file.
This is the story every time I try a 4.06 radio. 4.04 is rock solid.
Have you tried flashing the 4.6 radio via an update.zip as opposed to through fastboot? It's about the only other idea I can think of lol...
Just checked, I flashed the 2_2 last night, not 2_7.
I have flashed the radio via update.zip before and my phone worked but would be unstable. I will have to double check which version I used, could have been 2_2 as well.
codesplice said:
Come to think of it, that's the radio version I'm currently using, and that's where I got mine while I was running his ROM. So yes, flash that zip, flash Kangorama, and you should be square.
Click to expand...
Click to collapse
This is the same radio image I flashed two days ago and it worked for me quite well for an entire day (light 3G use) and then started crashing the phone when I tried downloading larger files (using the Audible app) via both WiFi and 3G in the evening. Once it started crashing I could not get into recovery until after I pulled my SD card. Once it booted OK without the SD card I put the card back and it booted ok again. It would still crash on heavy data use though.
Maybe try the 12_7 radio from http://forum.xda-developers.com/showthread.php?t=692609 ? I'm fairly certain that is the same radio update that I have applied on my AT&T N1.
edit: disregard....
I'm running out of ideas, dude
codesplice said:
I'm running out of ideas, dude
Click to expand...
Click to collapse
I appreciate your input. Thank you. I will try _7 again.
DvTonder said:
This is the same radio image I flashed two days ago and it worked for me quite well for an entire day (light 3G use) and then started crashing the phone when I tried downloading larger files (using the Audible app) via both WiFi and 3G in the evening. Once it started crashing I could not get into recovery until after I pulled my SD card. Once it booted OK without the SD card I put the card back and it booted ok again. It would still crash on heavy data use though.
Click to expand...
Click to collapse
Did you try not running/removing the audible app and see about stability then? What else are you using? Not every app is going to play nice with newer firmware.
attn1 said:
Did you try not running/removing the audible app and see about stability then? What else are you using? Not every app is going to play nice with newer firmware.
Click to expand...
Click to collapse
The crashes started just after I got the Rom installed.
I did the following:
- Nandriod backup (thank goodness for this!)
- I wiped all as per instructions
- Installed radio, rebooted OK
- Installed ROM (Rodriguesstyle 1.6)
- Booted OK into setup
- Configured my phone - first crash just after entering my gmail ID and the syncing of all the apps from the market started
- Rebooted, configured my phone again - apps installed this time but while configuring ChompSMS the phone rebooted again
- Rebooted, phone came up clean, ran OK all day
- Got home and tried syncing Audible content - phone crashed
- Could not get into recovery or boot the phone normally for almost an hour (pulling battery etc did not help)
- Pulled the SD Card and the phone booted, shut down, put the sd card in again, phone booted OK
- Got a phonecall, phone rebooted
- Got fed up and restored 4.04 radio and stock ROM
- Phone stable since
I was running the following apps:
- Autokiller
- Doubletwist Player
- Audible beta
- Silent Sleep
- ChompSMS 4.2
- Switchpro Widget
- Barcode Scanner
- ADW Launcher
- newsRob
- File manager
- Backgrounds
- Rom Manager
DvTonder said:
The crashes started just after I got the Rom installed.
I did the following:
...
- Installed ROM (Rodriguesstyle 1.6)
...
Click to expand...
Click to collapse
What kernel is the Rodrigessstyle ROM using?
Try Modaco's straight up Froyo repack - it has a stock kernel. I'd get as close to stock Froyo ROM/Radio as possible, see what I have and then go from there.
Also, make sure you're using an updated version of chompsms. I think I heard that reports were that it was not compatible with Froyo, but that it's been updated.
attn1 said:
What kernel is the Rodrigessstyle ROM using?
Try Modaco's straight up Froyo repack - it has a stock kernel. I'd get as close to stock Froyo ROM/Radio as possible, see what I have and then go from there.
Also, make sure you're using an updated version of chompsms. I think I heard that reports were that it was not compatible with Froyo, but that it's been updated.
Click to expand...
Click to collapse
I used the stock kernel. ChompSMS 4.1 and later is compatible and I was using 4.2. I am planning on trying the new Kang-o-rama 0.8b1! (CM-5.0.8+2.6.34 Kernel) rather than Froyo - if only I can get the radio to flash.
DvTonder said:
I used the stock kernel. ChompSMS 4.1 and later is compatible and I was using 4.2. I am planning on trying the new Kang-o-rama 0.8b1! (CM-5.0.8+2.6.34 Kernel) rather than Froyo - if only I can get the radio to flash.
Click to expand...
Click to collapse
Why not start with FroYo - the ROM the radio was meant to work with - before flashing anything else? If it doesn't run then, you have a real problem. otherwise, you have no idea where the problem is.
attn1 said:
Why not start with FroYo - the ROM the radio was meant to work with - before flashing anything else? If it doesn't run then, you have a real problem. otherwise, you have no idea where the problem is.
Click to expand...
Click to collapse
Point taken. Back to the basics.
I came straight from Rodriguesstyle 1.6 with the included add-on OV/UV kernel to Kang 0.8b1 without any issues. Even got the 720p hack working beautifully
well i am using the new froyo radio with my ATT nexus one, and its been no different than the old radio. no crashes or anything. however, i had NO idea that there were 2 froyo radios. is that what someone just posted on the first page?
I have had a simmilar experienc, but it is NOT froyo related.
I was rooted, on the desire ROM
It was restarting at seemingly random (and frequent) times through the day -
I reflashed to stock 2.1.
During setup, phone rebooted.
Got through sign-in. Installed some apps. Phone rebooted.
Phone was absolutely fine, as long as I didn't touch it. I would use it - browse, etc. Seemed to be fine. Would then reboot. FLashed it up to froyo. Same.
I think it's the bad RAM issue i've seen reports of, but I'm not sure. Sent in for a replacement.
Let's hope that's not OPs issue, though the problem seems to be pointed in that kind of direction. Hope you get your situation resolved under warranty.
chordmasta said:
I have had a simmilar experienc, but it is NOT froyo related.
I was rooted, on the desire ROM
It was restarting at seemingly random (and frequent) times through the day -
I reflashed to stock 2.1.
During setup, phone rebooted.
Got through sign-in. Installed some apps. Phone rebooted.
Phone was absolutely fine, as long as I didn't touch it. I would use it - browse, etc. Seemed to be fine. Would then reboot. FLashed it up to froyo. Same.
I think it's the bad RAM issue i've seen reports of, but I'm not sure. Sent in for a replacement.
Click to expand...
Click to collapse
I'm posting here because I don't know what else to do, my phone freezes using any froyo rom. It happens randomly and sometimes will not happen until I reboot the phone, but it makes my phone pretty much unusable. I've tried the leaked froyo rom, BB, CM 6 1&2 and countless others. I've tried wiping data / cache and formating the SD card (worked until i put my music back on), and I'm about to just try stock 2.2 and exchange it for a new one if it wont work.
Anyone else have this problem that could help me?
One thing I didn't see you do...
Have you at all root your phone to install the desired froyo rom for your phone?
Yes I am rooted, I'm currently on CM 5.0.8 and very happy but I would really like to get froyo working.
Alright. This is what I've done to get Froyo working on my Droid: I rooted my phone, downloaded BB v4 and changed the name of the file to update, installed Rom Manager on my phone(then found out I can download the roms from here as well), reboot into recovery through rom manager, wiped data & cache, selected install zip, then selected reboot phone. It took a bit to register but it converted over with BB v4.
I think I've found my problem
droidforums.net/forum/tech-issues-bug-reports-suggestions/67526-music-sd-card-causes-bb-4-freeze.html
this sounds like my exact problem, I'm going to look through my library and see if there is a corrupt file then try again
Hopefully that is the source of the issue and that'll be solved quickly. Good luck to ya
hey guys i just got my nexus one 2.3.3
im confused what 2 do first
root, unlock bootloader
what 2 do first?
and i preffer to do all these things WITHOUT adb, bcoz adb never works with me
You can't unlock bootloader without ADB (or actually without fastboot, but if you can't get ADB to work, then you probably won't be able to get fastboot to work - since they work the same way).
My suggestion is - do nothing. At least until you'll be able to follow one of the guides and get ADB and fastboot to work. Then you can decide yourself, whether you want the bootloader unlocked or not, and how will rooting benefit you.
what are the benefits of unlocked bootloader?
i just wanted it to get it rooted and flash CM7 on it
It has been discussed a lot, please search to get A LOT of answers.
In a very short version, the benefits are:
Safe radio updates (using fastboot)
Ability to flash whatever you want whenever you want - which is, permanent ability to have root access, regardless of the currently used OS.
but is it possible to flash CM7 rom without unlocking bootloader?
whenever i boot my nexus one, there is this little lock icon on the bottem that is "unlocked"
is my bootloader unlocked?
shiyou said:
but is it possible to flash CM7 rom without unlocking bootloader?
whenever i boot my nexus one, there is this little lock icon on the bottem that is "unlocked"
is my bootloader unlocked?
Click to expand...
Click to collapse
If there's lock icon at the bottom of boot splash screen, it means the bootloader is already unlocked. Is it used one?
yes its used, i guess that guy alrdy unlocked it for me
another problem
i have serius wifi issue, its different from the other wifi problem
if i connect to my wifi its authenticating, then disabled
i dont even go to sleep its just says disabled after authenticating, i tried reconecctint but same things happens again...
i installed wifi fixer but that doesnt work either
also, my 3g drops after 4 sec and i cant get it to work afterwards
Flash a new ROM, wipe your data, and try.
Repeat.
If the problems will still persist - they're in HW and you can't do anything about them.
i tried factory reset but didnt work...
This is exactly the reason why I suggest not touching your phone.
You either don't understand what exactly I'm guiding you to do, or don't understand the difference between various maintenance/repair operations. Flashing a new ROM and wiping user data from custom recovery ISN'T the same as doing "factory reset" from within already-installed ROM. Flashing 2 ROMs with different base (for example, lightly modified stock and CM7, or CM7 and MIUI, etc) introduces enough difference on the SW size to (almost) make sure that any problem which persists in both new ROMs, is coming from HW.
In any case, I suggest either waiting for someone with much more patience than myself (which isn't hard - patience isn't one of my strengths) to explain you some basics that you're not willing to learn yourself by reading, reading and some more reading, or to give your phone to someone who knows what he's doing.
dude....
i rooted and flashed many roms b4, this isnt my first android phone
i just got confused data wipe with factory reset....
Ok well now I need to know if you have a custom recovery, if so then just 5X wipe plus 3X system wipe and flash a new ROM, if not then do you have root access if not I'll walk you through the process.
shiyou
You are in good hands with Dude
Couple points:
Don't use Clockwork Mod 3.+ as recovery--which seems to be your next step--get a lower version
I prefer Amon_Ra 2.2.1 for my recovery
BACKUP phone (NANDROID) as soon as you get the recovery
Look thru Cyanogen thread from OP page and last few dozen pages
Cyanogen flashes a little differnet with having to flash gapps separate and flashing Dark Tremor's a2sd after each Nightly flash
i know how 2 root,flash,wipe, nandroid and all
i did it many times b4
i think i wont use nightly builds, but a stable? or RC?
which should i take?
How about cm7.1 RC1 that is the latest version of cyanogen mod.
rugmankc said:
shiyou
You are in good hands with Dude
Couple points:
Don't use Clockwork Mod 3.+ as recovery--which seems to be your next step--get a lower version
I prefer Amon_Ra 2.2.1 for my recovery
BACKUP phone (NANDROID) as soon as you get the recovery
Look thru Cyanogen thread from OP page and last few dozen pages
Cyanogen flashes a little differnet with having to flash gapps separate and flashing Dark Tremor's a2sd after each Nightly flash
Click to expand...
Click to collapse
why not clockwork recovery 3? the cyanogenmod rc1 states that i need that?
should i use gingerbeak? im on 2.2.3 and install the recovery afterwards?
ok i rooted it with gingerbreak and flashed clockworkmod recovery on it
after that i went into recovery and couldnt find nandroid backup so i rebooted again
i tried to make a backup via rom manager and it ended up with a "!" icon
i tried to go into recovery again and again i got the "!" icon
I don't know anything about Gingerbreak
But, on CWMod 3.+, it has been unstable for a lot of people--I don't recommend it
If you have Rom Manager--flash something like 2.5.1.4??
Still recommend Amon_Ra
I am not sure, but if you get the exclamation, you may not be rooted
If you are experienced at flashing, I would as another poster suggested--get to know your phone and study hard info from the Rom threads you want to try before trying.
What color was recovery--did it say ClockWork
I don't think you will see the name Nandroid in Clockwork--just Clockwork backups
A couple more suggestions, if you want
Back up sd card regularly--you will lose it on occasion--if you need to reformat it, use sdformatter outside of phone
Partition sdcard with zero swap
Wipe all (data/caches) multiple times before flashing new rom, including System
Posted this in the wrong place... so here I go again.
Alright as the Title says I got a problem with Froyo.
First of all, this is the first time i ever tried anything with a cellphone, although so far it went well (took me long though).
First I removed an old version of cyanogenmod from the old user.
Then I followed this guide: http://forum.xda-developers.com/show....php?t=1098899
Then I installed Froyo by Laszlo 5.2
http://forum.xda-developers.com/showthread.php?t=929678
Now to my ultimate surprise, I actually got this all done and it works perfectly, except for one thing. Wifi does not work. When I turn it on it starts scanning for networks, then gives the message "unable to scan for network" and Wifi automaticly gets turned off again. Before installing this I always found 2 networks from the point I'm sitting now.
I simply got no clue what it could be.
Some info. Following the guide for radio and boot I got the correct information in the bootloader as mentioned in step 3:
Dream PVT 32b SHIP S-on
HBOOT 1.33.0013d (drea10000)
CPLD-4
RADIO 2.22.28.25
OCT 21,2009,22:33:27
About Phone:
Android version 2.2.1
Baseband version 62.50SJ.20.17U_2.22.28.25
Kernel version 2.6.34.8-froyobylaszlo [email protected] #1
Mod version FroyoByLaszlo-5.2
If you need more info, just ask.
And thanks in advance,
Greetings,
Noddahead
edit:
Little update here. On some forums I found that a file bcm_supp.conf in /data/wifi caused a problem like mine. When I plug in my phone in my pc I only see the sd card. Therefore I installed sdk/adb thing, connected with my phone (correctly). and I manually tried to remove the file via cmd. This resulted in the notification that the file did not exist.
Hence, back to nothing. Any way I can make my internal memory show up again?
All in all it seems like I got the same problem as many people had with Froyo. But it seemed solved for everyone after a certain patch. My Froyo version is obviously more recent. And no one seems to have this problem with this version of Froyo (in the Froyo by Laszlo thread page 97ish and forth)
Alright. I'm trying my very best but I'm really clueless right now.
After not getting this wifi to work I tried the COS-DS mod. Installing it and everything went fine, except for one thing: the settings menu would not open.
Not being able to do anything on that I went on to the next to the next rom: Cyanogenmod 7 Magpie. Once again, most things work, but some do not. I started out with an input.latin error, which I somehow fixed. I do not have a status bar, and I think I'm missing some other things too... for example, the android market does not appear. Wifi does work now though.
I have no clue what's going on... do I just need to start over from scratch? Trying Froyo again? I could really use some advise.
Noddahead
Have you tried wiping properly before flashing the new roms because I've never had a wi-fi issue unlees it was broken in the kernel which is rare these days.
Thank you for replying.
I am back to Froyo by Laszlo now, seems the best option. Before installing that I wiped cache, wiped data/factory reset, and I used Ohsaka Superwipe. But no Wifi.
Using another Kernel with Froyo by Laszlo did not help.
Well, last update here. Never got it to work, now having succes with GingerYoshi. This topic can be locked.
try everything???? re partition and re format sd card, try ezbifftest 2708 kernel, i had best luck with laszlo rom
First of all, thank you for your guide.
I had not actually partioned before installing froyo, and I did partition before using Ginger right now.
If I would repartion right now, and then reformat... can I then instantly install froyo laszlo and the kernel? And what values for the partioning?
you can flash a rom whenever you want, as long as you wipe all data from previous rom or mod first,so i would repartition to this
96-128mb=swap
512mb=ext
than flash the ohsaka superwipev2, power off device than reboot back to recovery.
flash the rom you want and enjoy!!
re-partitioning/re-formatting does not have to be done everytime.. it's just good to do every once in a while because you never know what could be happening in there... you or a developers rom could have done something somewhere that caused a bug in your sd partitions so its always good to wipe them at some point...
the ohsaka superwipe i do reccomend using everytime!! I also recommend wiping it manually sometimes... also another good known method is a fastboot wipe 'i forget the cmd for it' lol but do these every once in a while...
Did exactly as you said, unfortunately I still get the same problem: Cannot scan for networks.
I will stick to Gingeryoshi for the moment.
Thank you for your time and help.
wow, thats a bummer... i never had that issue with laszlo's rom at all... i wonder what could be wrong. sorry i couldn't help.. just out of curiosity what device do you have? is it a dream or magic?
possibly if you are using a magic, you may need a kernel with wlan.ko modules included for the specific kernel(would be icluded in kernel.zip file)... different kernels wont work with different drivers...
It is a Dream
I have just recently restarted using this phone due to my uscellular S4 getting turned off. I am now back on my LG-P990 currently rooted and running CM10.1. BUT most importantly to me is the fact that I have all my wonderful apps on my s4, I want to be able to use them by using the LG phone as a tether and calls not much else BUT CM10.1 tethering does not work, so i find myself flashing rom after rom, avatar rom, older CM mods, none would turn on tethering, so i flashed a modded version of MIUI for this phone and it worked except for ONE thing no signal, tethering turned on just fine so i decided to look around for other roms and found Slimrom TRYED to flash it didnt work, try to flash actual MIUI roms off there site, didnt work, met with an error in CWM Recovery after some searching I found its because Im running the OLD Bootloader -_- THIS is the issue im having IF MIUI does NOT work is it possible to downgrade the bootloader again so i can restore my CM10.1 backup? I have been working at this for a week, if there is something here about this can someone please just point me at it? I would appreciate any help.
On a side note i DID soft brick the phone the other day and found a program called nvflash witch flashed an install of CM mod. Dont know if that will help any.
Jeffril said:
I have just recently restarted using this phone due to my uscellular S4 getting turned off. I am now back on my LG-P990 currently rooted and running CM10.1. BUT most importantly to me is the fact that I have all my wonderful apps on my s4, I want to be able to use them by using the LG phone as a tether and calls not much else BUT CM10.1 tethering does not work, so i find myself flashing rom after rom, avatar rom, older CM mods, none would turn on tethering, so i flashed a modded version of MIUI for this phone and it worked except for ONE thing no signal, tethering turned on just fine so i decided to look around for other roms and found Slimrom TRYED to flash it didnt work, try to flash actual MIUI roms off there site, didnt work, met with an error in CWM Recovery after some searching I found its because Im running the OLD Bootloader -_- THIS is the issue im having IF MIUI does NOT work is it possible to downgrade the bootloader again so i can restore my CM10.1 backup? I have been working at this for a week, if there is something here about this can someone please just point me at it? I would appreciate any help.
On a side note i DID soft brick the phone the other day and found a program called nvflash witch flashed an install of CM mod. Dont know if that will help any.
Click to expand...
Click to collapse
I really do not understand how other ROMs deny Tethering. Did you flash the latest 2.x kernel by pengus77 after installing the rom? Did you make a clean install(wipe everything then install)? On the other hand, yes you can switch bootloaders as much as you like, just remember that changing the bootloader wipes everything on your internal memory, so do a backup. Did you try just plain old stock 4.0.4? Should work there. Ask anything you want, if you're still having questions.
NoDze said:
I really do not understand how other ROMs deny Tethering. Did you flash the latest 2.x kernel by pengus77 after installing the rom? Did you make a clean install(wipe everything then install)? On the other hand, yes you can switch bootloaders as much as you like, just remember that changing the bootloader wipes everything on your internal memory, so do a backup. Did you try just plain old stock 4.0.4? Should work there. Ask anything you want, if you're still having questions.
Click to expand...
Click to collapse
As to the flashing to stock i lost the original rom backup i had made along time ago and cant find the original firmware anywhere online. When I flashed CM 10.1 I just ran with it, when i go to try tethering it says "Turning on portable wifi hotspot." and it stays on that no matter what untill i restart, left the phone running for 2 days once and that was still stuck on that before i restarted. As for flashing a 2.x kernel i had no idea about that. But yes when i did the installs i would do a clean wipe and install. Most of what i read online led me to believe that there was an error with CM 10.1 nightlys that was not being fixed for the tethering. So that is why i decided to go to another rom. Two questions one how do i go about finding the original firmware for this phone and two how would i go about updating or downgrading the bootloaders and could i be pointed to the files please?
Jeffril said:
As to the flashing to stock i lost the original rom backup i had made along time ago and cant find the original firmware anywhere online. When I flashed CM 10.1 I just ran with it, when i go to try tethering it says "Turning on portable wifi hotspot." and it stays on that no matter what untill i restart, left the phone running for 2 days once and that was still stuck on that before i restarted. As for flashing a 2.x kernel i had no idea about that. But yes when i did the installs i would do a clean wipe and install. Most of what i read online led me to believe that there was an error with CM 10.1 nightlys that was not being fixed for the tethering. So that is why i decided to go to another rom. Two questions one how do i go about finding the original firmware for this phone and two how would i go about updating or downgrading the bootloaders and could i be pointed to the files please?
Click to expand...
Click to collapse
Okay, This is SFSP by @sgspluss which is a pretty fast, stable and battery-friendly slimmed down version of stock ICS. It is available for both Old and NewBL, so you might want to try that first. This is AIO Toolkit. I know that you've used it and bricked your phone, but try again, and for the love of God install the nvflash drivers because most people skip that part. You have to do it manually and if you're running Windows 8 you need to disable Driver Signature Verification. But yeah, you switch bootloaders with this.