Related
I'm using zenexp 9.7 rom. Works perfect but I decided to try something different so I downloaded the cm7. Full 8 cyanogen and I loved it but certain mms won't download it tells me download unsuccessful so I went back to Zenexp no issues there wit mms so my question is am I doing something wrong why can't I get certain mms to download?
intermittent mms is a known issue for CM roms, but I would say that the goodies you get with CM7 gingerbread specifically, it's worth not getting a few mms IMO.
Yeah, I get that too. He's right though. Maybe one day it'll get fixed.
I've actually had this problem with froyo too, not just GB. That's why I'm back on a sense ROM. It's outdated but everything I need works, as I get and send a ton of picture mail for work. Unfortunately sacrifices sometimes need to be made. Sigh...
Sent from my HERO200 using XDA App
il Duce said:
intermittent mms is a known issue for CM roms, but I would say that the goodies you get with CM7 gingerbread specifically, it's worth not getting a few mms IMO.
Click to expand...
Click to collapse
I think I've read something about how Sprint uses an "uncommon" method for handling mms, and therefore its not 100% compatible with AOSP/non-Sprint ROMS.
A workaround may be available though. This is just a thought, and I don't send/rcv many mms so I cannot easily test it. Just throwing it out there and maybe someone can provide results.
I know you can access your mms via your profile on Sprint's website. I assume that all mms still go to your account, regardless of whether or not you can view them traditionally on the phone. Based on that assumption, I would think that you could bookmark a link to the webpage and view the missed mms from the browser in CM7.
Any thoughts?
Sent from my HTC Hero CDMA using XDA App
I felt there was a need for an updated rom dedicated to the Optimus T (USA). I could not find a proper rom with both Wifi Calling and fully-functioning MMS.
Thus, RevOidOptT was born.
Wifi Calling works beautifully and full-size MMS can be sent/received. Also, I incorporated google setup on first boot and edited build.prop to fix locale, currency, and date/time issues.
This is based off Neojn's devoid froyo final and most of the credit goes to him. Thanks, Neojn!
Thanks to blueren for theme and franco for kernel!
IMPORTANT NOTES:
-I am not responsible for bricked devices or any other issues associated with flashing this rom.
-STOCK MMS HAS BEEN REPLACED WITH GO SMS PRO IN ORDER TO FIX MMS SIZING ISSUES ON THE T-MOBILE USA NETWORK. IN ORDER TO SEND/RECEIVE MESSAGES, TAKE THE FOLLOWING STEPS:
1. OPEN GOSMS, HIT MENU BUTTON AND GO TO SETTINGS. THEN, GO TO IMPORTANT TIPS AND SELECT 'Stock SMS uninstalled?'
2. GO BACK TO SETTINGS, SELECT MMS SETTINGS AND SELECT 'Preserve image resolution'
This should give you fully-functional, full-sized MMS. Joy! Joy! Joy!
ALSO, All other messaging apps work with GO SMS installed, regardless of whether stock MMS is present. So feel free to use any messaging app you'd like. (Just be sure the steps above have been taken)
ROM SPECS:
Kernel:
franco.Kernel.v18.1-cfs (Clocked at 600/245 smartass by default. I suggest switching to 748/320 interactivex for optimal speed/battery combination)
Added apps:
noFrills CPU
BatteryCalibration (run after flashing ROM and fully charging phone to optimize battery life)
Added essential sapps
Wifi Calling
Calculator
Calendar
Browser
Carhome
Quick search
Youtube
Clock
Livewallpapers
Music
Movie player
Replaced apps:
LG Keyboard to GB Keyboard
Stock Gallery to Quickpic (much cleaner/faster)
Stock MMS to GO SMS Pro (see important notes above)
Zeam Launcher to LauncherPro
FileManager to FileExpert (very excellent substitute for those that want root access without paying for Root Explorer)
Theme:
SuperBlue Theme v5 (changed boot animation to android particles and removed wallpaper)
INSTRUCTIONS:
1. Download RevOidOptT
2. Do NAND backup (not required but HIGHLY recommended)
3. Wipe everything (data, cache, dalvik cache, battery stats, etc.)
4. Flash RevOidOptT
5. Reboot
6. After going through setup, it will force close, just keep going (only a first-time setup bug)
7. Follow instructions above regarding GO SMS Pro settings
8. May have to clear Market cache in order to get apps to show up in 'My apps"
9. Enjoy
OMG! another froyo base on who? Do you have proper permission to use that? If no, i bet someone will request to close your thread.Nice share for froyo lovers!
Haha yes. Permission was granted. Thanks for caring.
Sent from my LG-P509 using XDA App
royskeyz said:
OMG! another froyo base on who? Do you have proper permission to use that? If no, i bet someone will request to close your thread.Nice share for froyo lovers!
Click to expand...
Click to collapse
I think he said this: "
This is based off Neojn's devoid froyo final and most of the credit goes to him. Thanks, Neojn!"
Click to expand...
Click to collapse
Now about permission, I dont know. But since its for Optimus T, that may be okay.
panman86 said:
Haha yes. Permission was granted. Thanks for caring.
Sent from my LG-P509 using XDA App
Click to expand...
Click to collapse
Yeah! thats good, this is for other users who want to use noejns, just acquire proper permission and your good to go.
Is the same true for kernels?
Sent from my LG-P509 using XDA App
General rule is: It's fine as long as you give credit to the people who did any work that you are using. Kernels, roms, apps, scripts etc, if someone else put their time and effort into it, you should credit + thank them, ideally with a link to where it came from.
nogav said:
General rule is: It's fine as long as you give credit to the people who did any work that you are using. Kernels, roms, apps, scripts etc, if someone else put their time and effort into it, you should credit + thank them, ideally with a link to where it came from.
Click to expand...
Click to collapse
Duly noted. Thanks!
Any takers yet? Where are my fellow americans with ****ty reception and a need for wifi calling?
Sent from my LG-P509 using XDA App
How's this any different than running devoid + my patch here:
http://forum.xda-developers.com/showthread.php?t=1116268
Just curious, because that is exactly what I run on my P509.
AxesofEvil said:
How's this any different than running devoid + my patch here:
http://forum.xda-developers.com/showthread.php?t=1116268
Just curious, because that is exactly what I run on my P509.
Click to expand...
Click to collapse
Ha good question. Just the app changes I noted and the fixed mms. Plus the theme/kernel for those that want a quick fresh install. Mostly tried to package together a rom that is fully loaded (minus some gapps) for the average user that just wants to flash and go without extra hassle.
Sent from my LG-P509 using XDA App
I really like seeing roms like this! Will put through the paces soon.
Question: did you make any adjustments to avoid the phone defaulting to british currency and location? It may be the franco.devoid that I am running, but I would imagine all versions are the same in that respect. Morelocale2 app fixes this, but I would still like to find a code/setting fix.
Sent from my LG-P509-FrancoSpecial using XDA App
DesigningOne said:
I really like seeing roms like this! Will put through the paces soon.
Question: did you make any adjustments to avoid the phone defaulting to british currency and location? It may be the franco.devoid that I am running, but I would imagine all versions are the same in that respect. Morelocale2 app fixes this, but I would still like to find a code/setting fix.
Sent from my LG-P509-FrancoSpecial using XDA App
Click to expand...
Click to collapse
Locale, currency, etc. are fixed by my incorporation of google setup on first boot. So yes I did do something about it.
Sent from my LG-P509 using XDA App
I guess this is about as good as it gets for me! I have to have the wifi app when in the US. Have really bad reception at home and no bars most of the time... hoping for a 2.3 update though!
Does bt work? I use bt constantly to listen to podcasts and audio books. No stereo bt would be a big deal breaker for me.
Sent from my LG-P509 using XDA App
BT Working
Answered my own question. I've used the BT in every scenario I can think of and it works flawlessly. I think I'll be keeping this as my daily driver.
Thanks!
This is great, I was looking for a ROM for my wife's phone that has Wifi calling.
cybok0 said:
This is great, I was looking for a ROM for my wife's phone that has Wifi calling.
Click to expand...
Click to collapse
You can add WiFi calling to the Optimus T on any 2.2 - 2.2.2 rom for the 01.
[MOD]Add Wifi Calling for froyo based roms (T-Mobile only)
Just flashed this rom, very solid/stable thank you!
One thing tho, is there a way to get the stock txt/mms app on here? Don't like go sms much...
I'm assuming there's a reason gosms is included, maybe a problem sending MMS using the stock app? Just in case, if I can use a stock aosp ...could someone point me to a link?
Just installed this last night and after some playing and testing, I am stoked about finding this ROM! Nice work!!
Sent from my LG-P509 using XDA App
Love the rom, wifi calling working great.Thanks!
Has anybody tried all the versions spread on the XDA Forum? I tried this ones:
Versions available: (Use the latest from below, or use DeToX-cz's installer app)
1. "Talk_with AV.zip". Same as stock with just the FC fixed so it works on other phones.
2. "Talk_with_AV_no_wifi.zip" or "talk1.3.nowifi.update-signed.zip". Added a fix to let it work over your data connection.
3. "talk1.3.nowifi.v2-signed.zip". Added an additional fix to let it work over data.
4. xilard version. #3 with Camera and microphone tweaks.
5. [email protected]'s gTalk installer. Installs the new gTalk files. Needs root. Not sure what mods he has incorporated in it.
6. xilard version +theos0o portrait fix, by $omator
7. version "1.33" by theos0o [thread][multiupload link]. I copied the 3 files in the update.zip manually using android commander and it works fine. (Nexus one, 2.3.5 CM nightly)
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1056793
http://forum.xda-developers.com/showpost.php?p=15912991&postcount=668
http://forum.xda-developers.com/showpost.php?p=15967564&postcount=725
http://forum.xda-developers.com/showthread.php?t=1233682
and the one app in the market, which can install all of the custom gtalk apps.
https://market.android.com/details?id=com.brainwashstudio.talkinstaller
In some of them, the other person cannot see me. In other versions, cam works fine, but I cannot hear the person and viceversa. In the modaccos version, the front cam is 90° turned around. Well you know all the problems. Thats why my question:
Does anybody knows a gtalk [video/wifi/cam switcher] custom app that really works on the Incredible S?
BTW: Im using Virtuous 2.37 Rom.
Thanks for answers.
Am using the default 'talk' app in virtuous unity 2.37.
seems to be no problem here!
i did have trouble in MIUI rom, but nothing with VU.
has this been persistent?
otherwise i would suspect faulty network
And video call works on yours? Can u see and hear the other person? Can the other person hear and see you? Is your front cam flipped to 90 degrees? Can you switch between front and rear cam?
Sorry for so many questions . I'm just pissed that my gtalk doesn't work properly.
Thxs.
Sent from my HTC Incredible S using XDA App
I did a full wipe and installed the new VU 2.39.
Talk works fine, only that the front cam is flipped on 90°.
Is there a patch or something? maybe this framework-res or something like that? i dont know what else to try.
Can someone help?
Thanks.
3vacas said:
And video call works on yours? Can u see and hear the other person? Can the other person hear and see you? Is your front cam flipped to 90 degrees? Can you switch between front and rear cam?
Sorry for so many questions . I'm just pissed that my gtalk doesn't work properly.
Thxs.
Sent from my HTC Incredible S using XDA App
Click to expand...
Click to collapse
lol. i understand your frustration.
but everything works fine. i can hear and see the other person and they can hear and see me too.
the image is quite right, not flipped
am sorry you having these issues!
since you have wiped and re-flashed, you could probably try uninstalling the 'talk' app & then download and re-install from the market.
maybe that would work
Ive been running the O3D 10j firmware for a couple days now, havent upgraded to 10k yet but heres something to help out with mms/4g and how I got them working.
MMS is as simple as changing the apn. For whatever reason trying to change the default apn has been spotty for me, so what I do is just create a new apn with the following information:
Name: AT&T
APN: wap.cingular
Proxy: leave blank
Port: leave blank
Username:[email protected]
Password:CINGULAR1
Server: leave blank
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC:310
MNC:410
APN Type: leave blank
Now save that and select it as your default. mms should now be working. For whatever reason that is the only ATT apn info I could get to work with mms. If I try to use any other configuration for ATT I lose mms functionality. Which was frustrating because I kept copying the apn off my other ATT phones and mms would not work. Neither my Aria nor my Captivate need the password but apparently this phone NEEDS that password to get mms on P920 roms...
4G is a little more complicated and, at the moment, has a trade-off. So from here you have to make a decision, because I have as of yet been able to fix this issue. But you have to choose to either have 4G and use a 3rd party dialer/contacts app OR you can keep the default apps and not have 4g. You're call but here how its done. Go into /system/etc/flex/flex.xml and change it to read like this:
<?xml version="1.0" encoding="utf-8"?>
<Flexinfo>
<Flexinfo
FLEX_COUNTRY_CODE="US"
FLEX_OPERATOR_CODE="ATT"
FLEX_MCC_CODE="310"
FLEX_MNC_CODE="410"
FLEX_REGION_CODE="0"
FLEX_SIMLOCK_ON="0"
FLEX_MODEL_CODE="0" />
</Flexinfo>
Now you should be getting the H+ symbol in the notification bar AND the up/down arrows. If you dont have the arrows then your apn is set incorrectly. If you dont have the H+ then you messed up in the flex.xml file.
Some notes:
Ive tried replacing the default Phone.apk/Contacts.apk with their equivalents from aosp roms, O3D roms, and Thrill roms. None of them have any affect on the issue. And trying to change the TelephonyProvider.apk has only resulted in frequent FC's. I can only assume its a framework issue but since I use a 3rd party dialer anyways Im not inclined to look into it.
I removed the default Contacts.apk because I got the occasional FC when ending a phone call. Removing it has no effect on anything since you cant use the default contacts app with the above 4G method. You have to keep the stock Phone.apk or you will lose the ability to make changes to your apn. It does not however affect your ability to make/receive calls with a 3rd party app. ContactsProvider.apk is also required or you wont be able to sync contacts to your phone.
Speaking of 3rd party dialers, Ive tested GoContacts and DialerOne so far and both work with no issues what so ever and have built in contacts functionality. Im going to assume there are many more that work as well.
So now theres really no excuse not to dive into the wide world of O3D roms!
EDIT: Just remembered that the time will be wrong after this too. Im trying to remember what I did to fix that. In the mean time you can go to menu>settings>Date & Time> and manually set the time. Its just that the GMT is being calculated incorrectly for each timezone so it gets the hour wrong so you need to set it manually. The minutes are correct though, you dont need to mess with those.
That's awesome news callmearia! Much appreciation for all the hard work you put in to get this working. Ill try this out 2nite when i get home. Thanks again
Sent from my LG-P925 using XDA App
Wait, you're telling me that I can run O3D roms on my Thrill? Sorry if this is a dumb question but I just picked one of these up a few days ago and still learning more about it.
formuk said:
Wait, you're telling me that I can run O3D roms on my Thrill? Sorry if this is a dumb question but I just picked one of these up a few days ago and still learning more about it.
Click to expand...
Click to collapse
Yes you can (cuz its essentially the same device) but up till now you lost the 4g and MMS with an o3d rom.
Sent from my LG-P925 using XDA App
03d??
any word of getting a 3d coverter for movies?? or where i can find 3d movies at for our phones??? please reply thxs
---------- Post added at 06:55 PM ---------- Previous post was at 06:54 PM ----------
By the way this firmware works awsome appreciate it
no problems so far
when i do this mod, my google voice stops working...any ideas? i get the H+ and 4g speeds. is that part of the trade off?
mafiadesi said:
when i do this mod, my google voice stops working...any ideas? i get the H+ and 4g speeds. is that part of the trade off?
Click to expand...
Click to collapse
Ooh i didnt test google voice. Ill look into it tomorrow though.
Sent from my LG-P925 using Tapatalk
Have you tried also doing the telephony.apk? I noticed the Thrill and O3D have different sized telephony.apk sizes by a significant amount. I will try and test myself sometime tomorrow or Monday depending on my schedule.
pjcforpres said:
Have you tried also doing the telephony.apk? I noticed the Thrill and O3D have different sized telephony.apk sizes by a significant amount. I will try and test myself sometime tomorrow or Monday depending on my schedule.
Click to expand...
Click to collapse
Yea if i remember correctly it caused a few issues with fc's. But it couldnt hurt to try it again.
Sent from my LG-P925 using Tapatalk
claro pr
so what if im on another carrier not att but claro puerto rico ? how i fix the 3g?
bubuphonik said:
so what if im on another carrier not att but claro puerto rico ? how i fix the 3g?
Click to expand...
Click to collapse
3g SHOULD just work. But if not then go into your stock rom and copy the contents of /system/etc/flex/flex.xml and oaste them into the same file on your o3d rom. You might also want to get the stock apn settings off your phone to setup an apn on your o3d rom. Just follow the directions from the original post. I would recommend trying to change the apn first an then if that doesnt work go ahead try modifying your flex.xml file necuse the latter can cause issues.
Sent from my LG-P925 using Tapatalk
constant fc
after trying this with my thrill.. all the steps mentioned.. i rebooted and began to recieve FC for com.android.phone and com.lge.android.hime
glad i saved a copy of the old xml before trying this.
geraldf80 said:
after trying this with my thrill.. all the steps mentioned.. i rebooted and began to recieve FC for com.android.phone and com.lge.android.hime
glad i saved a copy of the old xml before trying this.
Click to expand...
Click to collapse
Which rom? So I can look into it.
Sent from my LG-P920 using Tapatalk
claro pr only has h+ which i still have after flashing king rom is that normal ?
CallMeAria said:
Which rom? So I can look into it.
Sent from my LG-P920 using Tapatalk
Click to expand...
Click to collapse
[ROM][06/10] ThiaiZO3D V1.5-BaseV10K-Stock,Stable and fast
is the title.. everything else works great... but when i change the flex.xml info it starts all the trouble..
apn works great.. up and down arrows.. but no more than an "h" symbol.. no +
Edit: any ideas?
geraldf80 said:
[ROM][06/10] ThiaiZO3D V1.5-BaseV10K-Stock,Stable and fast
is the title.. everything else works great... but when i change the flex.xml info it starts all the trouble..
apn works great.. up and down arrows.. but no more than an "h" symbol.. no +
Edit: any ideas?
Click to expand...
Click to collapse
The apn wont add the h+. That's where the flex.xml comes in. The apn is just for mms.
I have ThaiZ booted right now but with Franlovs kernel and the only time I get a fc is if I try to use the stock dialer or contacts app. Is that what you're doing or are the fcs happening all the time? This is why the 3rd party dialer/contact app is required.
Sent from my LG-P920 using Tapatalk
bubuphonik said:
claro pr only has h+ which i still have after flashing king rom is that normal ?
Click to expand...
Click to collapse
Is the phone model a P925 or P920? I tried to look into it and Claro does offer 4g, although I couldn't determine on what devices.
Sent from my LG-P925 using Tapatalk
CallMeAria said:
The apn wont add the h+. That's where the flex.xml comes in. The apn is just for mms.
I have ThaiZ booted right now but with Franlovs kernel and the only time I get a fc is if I try to use the stock dialer or contacts app. Is that what you're doing or are the fcs happening all the time? This is why the 3rd party dialer/contact app is required.
Sent from my LG-P920 using Tapatalk
Click to expand...
Click to collapse
So your saying i need to remove the phone and contacts apk files completely.. thought i could just not use them..
Yes. Im getting constant fc's when i have the modified flex.xml..
unless im wrong.. im gonna try deleting the phone.apk and contacts.apk files.. um.. later..
could you save a tired guy the trouble of sifting through search results and lemme know the filepath for said apk files?
Sent from my LG-P920 using xda premium
geraldf80 said:
So your saying i need to remove the phone and contacts apk files completely.. thought i could just not use them..
Yes. Im getting constant fc's when i have the modified flex.xml..
unless im wrong.. im gonna try deleting the phone.apk and contacts.apk files.. um.. later..
could you save a tired guy the trouble of sifting through search results and lemme know the filepath for said apk files?
Sent from my LG-P920 using xda premium
Click to expand...
Click to collapse
Don't remove phone.apk. Too many things dependant on it. Contacts.apk is in /system/app/Contacts.apk
Have you messed with anything telephony related? That's when I started getting a lot of fc's.
Sent from my LG-P920 using Tapatalk
A few member in the burst thread know about what I have done SystemUI wise to give us a little bit of that Stock ICS flare. After so I did the same with the framework-res. Well here is a thread dedicated just to that. I hope you enjoy. These do work! I use them myself. Screen shots shall be uploaded sooner or later for proof. Disclaimer: I am not responsible if something goes wrong. MAKE A NANDROID BACKUP, just in case.
Below is my 4th revision of a SystemUI: Signal bar, bluetooth, wi-fi, silent, vibrate and battery is changed to stock ICS blue.
www.dropbox.com/s/3ippqv6698z5j7a/SystemUI4.4.apk
instructions: for ease do this.
Of course rename the file back to "SystemUI.apk".lol don't want a awkward situation.In the directory of where you would adb your device place this in the directory and navigate to the folder where said file would be located type.
- adb remount (remounts device and can give permissions)
- adb push SystemUI.apk /system/app/SystemUI.apk
--Should move accordingly. Then this.
- adb shell
- su
- reboot
SystemUI is finished!!!
Below is the modified framework-res. The toggle switches for like wifi and bluetooth in the settings menu is changed. The spinner icon for when your phone shuts off is changed. the scrubber when you use your volume control is changed. The USB, ADB, Dload/Uload is changed.
Download it.:https://www.dropbox.com/s/cw7bxsvljplwiwb/framework-res.apk
Instructions: Move the file to your directory where your android stuff is on your computer like for systemUI.
- adb remount
- adb push framework-res.apk /system/framwork/framework-res.apk
-- Should move!
- adb shell
- su
- reboot
There you go!
There will be more revisions in the future when i have the time! Oh and some work with the contact and phone apk.
Hope this works for you and that you love it! I know I do.
Very good mate +1 / Here is the tutorial for the same . I'll appriciate if someone can provide me the orignal settings so i can demonstrate that also
http://forum.gizmolord.com/android-modding/framework-system-ui-by-xxthe/msg84927/#msg84927
ujjwalchhabra said:
Very good mate +1 / Here is the tutorial for the same . I'll appriciate if someone can provide me the orignal settings so i can demonstrate that also
http://forum.gizmolord.com/android-modding/framework-system-ui-by-xxthe/msg84927/#msg84927
Click to expand...
Click to collapse
Don't forget the scrubber animation on the volume switcher.
I will upload more screenies for you to post of gizmo. Will be later today as xda is being a fart nugget.
the status thermometers (such as shows when installing an app under "Downloading...") have a flicker to them while they are running...
mr72 said:
the status thermometers (such as shows when installing an app under "Downloading...") have a flicker to them while they are running...
Click to expand...
Click to collapse
I noticed that too.. I really do not know what happened at that point... Something may have went wrong when I was switching out the scrubbers... No idea. I will look into it when I get home from work. Sorry for the inconvenience.
xxthe said:
I noticed that too.. I really do not know what happened at that point... Something may have went wrong when I was switching out the scrubbers... No idea. I will look into it when I get home from work. Sorry for the inconvenience.
Click to expand...
Click to collapse
No inconvenience, just wanted to mention it in case you hadn't seen it and want to fix it.
Looks like the bar is not in the same place on the Y axis as the original, and it's redrawing a blank page after looping, which causes the jump. guessing
mr72 said:
No inconvenience, just wanted to mention it in case you hadn't seen it and want to fix it.
Looks like the bar is not in the same place on the Y axis as the original, and it's redrawing a blank page after looping, which causes the jump. guessing
Click to expand...
Click to collapse
The download is the original. I believe it is just a issue with the phone because when I was tinkering with drop down alittle bit it started that. And I will definitely look into fixing it. It isn't a major issue. I mean. I never pay attention I just look for complete and not installed lol. At the moment I'm working on changing apk icons for our phone and editing the framework for the dialer. It is really ugly in my opinion.
Sent from my PantechP9070 using xda app-developers app
Here is something for you guys. The sexiness of the ics and jb. The messaging.
http://db.tt/qOMoaxMH
One is holo styled meaning black and stuff. And I have the regular as well. Above is the holo here is the regular.
http://db.tt/AjZaJ1Q6
Hope you like.
Also here is the browser for cm9 as well. It works I use it my self http://db.tt/VK7Q7aX2
Forgot this too. Here is the calendar as well.
http://db.tt/0cBvedwN
Sent from my PantechP9070 using xda app-developers app
Here is some screenies.
That five bar sexiness.
Sent from my PantechP9070 using xda app-developers app
Calendar I seeped and clicked the wrong one -.- won't let me upload the calendar screen shot.
Sent from my PantechP9070 using xda app-developers app
Proper calendar xD
Sent from my PantechP9070 using xda app-developers app
I keep forgetting stuff that works. Here is the deskclock. I assume everyone knows how to do system apps. But yeah.
http://db.tt/lpgfEonH
Sent from my PantechP9070 using xda app-developers app
xxthe said:
The download is the original. I believe it is just a issue with the phone because when I was tinkering with drop down alittle bit it started that. And I will definitely look into fixing it. It isn't a major issue. I mean. I never pay attention I just look for complete and not installed lol. At the moment I'm working on changing apk icons for our phone and editing the framework for the dialer. It is really ugly in my opinion.
Sent from my PantechP9070 using xda app-developers app
Click to expand...
Click to collapse
Actually the stock dialer (and phone.apk, incoming call screen, etc.) will not scale to my resolution (192dpi), so if you have a way to fix this, it would be major! Using Go Contacts (and dialer) EX as a substitute, which works but is very slow.
mr72 said:
Actually the stock dialer (and phone.apk, incoming call screen, etc.) will not scale to my resolution (192dpi), so if you have a way to fix this, it would be major! Using Go Contacts (and dialer) EX as a substitute, which works but is very slow.
Click to expand...
Click to collapse
Get exDialer and get the ICS theme for it. I like it alot better in my opinion. And I got a request to cook up a rom. I'm implicating a lot of the stuff you have seen throughout the thread. Stock ICS apps, my systemUI and framework.
Should have the ROM uploaded sometime today!
xxthe said:
Get exDialer and get the ICS theme for it. I like it alot better in my opinion. And I got a request to cook up a rom. I'm implicating a lot of the stuff you have seen throughout the thread. Stock ICS apps, my systemUI and framework.
Should have the ROM uploaded sometime today!
Click to expand...
Click to collapse
Yes that's what I have but it is very slow. Loading the dialer/phone app is very, very slow, same for contacts.
While you're building something new, the AOSP lock screen would be killer, and the dialer & phone apps need to be reverted to stock. Those are some of the biggest problems with the Burst stock ICS IMHO.
mr72 said:
Yes that's what I have but it is very slow. Loading the dialer/phone app is very, very slow, same for contacts.
While you're building something new, the AOSP lock screen would be killer, and the dialer & phone apps need to be reverted to stock. Those are some of the biggest problems with the Burst stock ICS IMHO.
Click to expand...
Click to collapse
I actually found where our lockscreen lurks. Took me 4 hours to find it. And the dialer and contacts... I have the Stock ics apps for it.. I have tried alot of ways. But I can not get them to work to save my life.
And I'm actually done building. Just a matter of uploading the rom.
Stock ICS contacts and dialer. Ours has so much that they do not so it will be tricky to revert but I will keep fooling with photoshop and see what I can do.
xxthe said:
I actually found where our lockscreen lurks. Took me 4 hours to find it
Click to expand...
Click to collapse
Let me know if I can help with this.
And the dialer and contacts... I have the Stock ics apps for it.. I have tried alot of ways. But I can not get them to work to save my life.
Click to expand...
Click to collapse
Yes, I did the same thing, and had the same kind of success rate (zero). Couldn't get stock ICS dialer and contacts to work.
mr72 said:
Let me know if I can help with this.
Yes, I did the same thing, and had the same kind of success rate (zero). Couldn't get stock ICS dialer and contacts to work.
Click to expand...
Click to collapse
My friend fount a guide for it for me. I will try later. The lockscreen atleast.
http://forum.xda-developers.com/showthread.php?t=1949148
There it is. I'm not that good with baksmali. Has been awhile. So have fun mr72
Sent from my PantechP9070 using xda app-developers app