Hi all,
I have some trouble figuring out what's happening with my Galaxy S internal sdcard.
first, I lost part of my phone during a call. phone fell in a rebooting loop. since then ; HELL !
I followed each and every post of about 200 threads to get my phone back like (not limited too) :
- flashed 2.1 (2.2) original firmware with Odin
- flashed all existing ROMS (or almost) with .pit, pda via Odin
- all mount unmount things (now grayed in menu with no available message)
- messing around with adb fdisk, mount, format, etc
- did all possible combination of reset, hard reset, wipe, format from phone or recovery
- tried repartitioning card (with gparted once)
- formating via usb from window 7
well, you got the picture !
now the strange things are :
- phone boot ok with any ROM, now with Darky resurection 10.1
- call, gps, messaging are all ok
- no sdcard visible from within the phone or from windows, so no camera or music or any apps that needs to write to sdcard is possible
- a 2go partition exists on the 16go internal sdcard
- if external sdcard is removed, phone never boot pass logo, although I can go in recovery mode and manage to see all files on internal sdcard with adb shell
- mmcblk0p1 and mmcblk0p2 are only visible when external sdcard is in the phone so I guess the 14go partition failed once to load and system recorded external sdcard as the internal sdcard.
I need a way to put sdcards in the right place as I'm pretty sure the internal one is not fried but only lost a partition probably due to lagfix or a corrupt filesystem.
I'm no expert at all with linux OS or partitioning but I'm sure that's the way to go and I know there's a great bunch of devoted developers in here
PR
ps. I'm willing to pay if anyone can get me out of there FAST
I suspect this could be down to bootloaders, 10.1 requires ficeto JVH base right ? and that requires GB bootloaders, im not 100% sure, ive not used his roms for quite some time.
but im sure your problem lies there somewhere.
azzledazzle said:
I suspect this could be down to bootloaders, 10.1 requires ficeto JVH base right ? and that requires GB bootloaders, im not 100% sure, ive not used his roms for quite some time.
but im sure your problem lies there somewhere.
Click to expand...
Click to collapse
phone boot ok with all ROMs with any XXX base I tried so I installed 10.1
whatever the ROM, issues are all the same as mentioned above
this won't b easy
well flash back to froyo or eclair, use a 3 file firmware with pit and re-partition
then when that is successful flash this : http://sourceforge.net/projects/teamhacksung/files/galaxys/GT-I9000_FROYO_FULL_PDA.tar/download
then report back please
you dont have the I9000 M<< do you ??
azzledazzle said:
well flash back to froyo or eclair, use a 3 file firmware with pit and re-partition
then when that is successful flash this :
then report back please
you dont have the I9000 M<< do you ??
Click to expand...
Click to collapse
ok done flashing
manage to reboot phone WITHOUT external sdcard.
still don't have access to the 14go internal sdcard partition, although ROM is installed on it (maybe on the 2go partition).
external card is recognized but only with unmount option as size is indicating 00 (of 16go) so cannot use it to store anything from phone (camera, music, etc) will try a empty 8go
any idea about internal sdcard ?
few more white hairs
you didnt state whether you had the M version of the SGS, this is known for its internal sd failures.
also boot into recovery, is there any error messages ?
I have Vibrant version from Bell, GT-I9000 from about phone menu
still cannot mount external sdcard
recovery report no error so far
the bell version of the i9000 is the one that suffers from internal sd card corruption.
there have been many reports of this, i feel you could be another on the ever growing list.
Have a read of this http://forum.xda-developers.com/showthread.php?t=905975
if that brings you no luck, i would suggest you ring bell / samsung for a repair / replacement
Related
I’m hoping someone can help me out with my phone. I have been searching the forums but it’s all getting a little much and i just need some advice please.
The background
I flashed my UK sgs (i9000 i think) with a darky modded ROM which has worked fine for about 6 months my phone has become more and more unstable. Seeing as i can work Odin i thought i would flash it again and fix my issues. Then my phone crashed and wouldn’t boot up, it was stuck on the Samsung Galaxy screen, before the flashing S. I then downloaded the official 2.3.3 ROM’s from the link of official Samsung ROM’s from the thread in the General forum and flashed it. This all went fine until i rebooted my phone, it went into recovery mode fine, although i got some error messages about being unable to mount the SD cards (i can add the proper error message tomorrow for you) i cleared user data and cache, rebooted and my phone came up with a new Gingerbread ROM. This was fine until i realised it had not mounted either my Internal or External SD cards. The operating system worked fine but i could not format or mount my SD cards. I then decided to reimage the phone using the same image i had downloaded in case something had gone wrong but i got the same error messages and now i couldn’t boot into the OS. Since this has happened i have downloaded a 2.2.x ROM and flashed that but i still have the same problem. I have also downloaded and flashed the Darky Resurrection ROM but that doesn’t seem to have helped. I have asked Odin to repartition, i have used PIT 512 and a couple of others, 1 and 3 file ROM’s and if i am honest, i have got nowhere apart from a headache.
I think i have some how corrupted the internal SD card and need to reimage all the right folders and stuff but with the huge amount of official ROM’s, custom ROM’s, recovery tools and tips and tricks, my head is just swimming. Can someone please just point me in the right directions and hopefully i can have a working phone in the morning.
Many thanks in advance,
Simon
do you have any lagfix before you flash to the official 2.3.3 ROM’s ?
I'm having a similar issue w/ mine. The external sd wouldn't mount and i had kind of already started the process to update the rom. It was a dumb mistake. i knew the sd wasn't mounting so i used a different phone to mount put the updates on. Nevertheless i can't use my phone, other than to get on clockwork.
I think i may have had a lag fix on it but as i was unable to get my phone to start there was no chance of removing it before i reflashed the phone. Now i just need to get the damn internal SD working again so i can have a working phone, can you help?
Also, sorry if my main post is a little rambling, i wrote it when i got home from the pub drowning my sorrorws and may have been a little drunk...
Ok, now i've had a coffee and my headache is dying down i can add a little more info which will hopefully help.
I just downloaded GT_I9000_XWJS7_XXJPY_XEEJS1 from Darky rom user guides page on restoring a SGS to a stock ROM and followed all of the instructions. the flash in Odin goes just fine, no errors or anything, my phone the reboots, gets to the Samsung Galaxy screen and i get into the recovery mode with the following messages :
Update media. please wait
E:Can't mount /dev/block/mmcblk0p1
(no such file or directory)
E:copy_dbdata_media: Can't mount SDCARD
Your storage not prepared yet, please use UI menu for format and reboot actions
copy default media content failed.
This is where i then get stuck, my phone will just get stuck in a boot loop and there seems to be no way to get into the phone. This is starting to drive me to dispair now as everything i have tried has failed badly! Does anyone have any idea how i go about recovering from this?
ok so,
-flash froyo firmware (2.2.1 might be better) then flash speedmod kernel
-get into recovery mode and check your phone's file system in lagfix option
-if it is rfs change it to ext4
-if it is ext4 change it to rfs
im not sure about this method but i ever had this preblem after i converted system to rfs (ext4 before)
hope it helps you and tell me that it works or not,thanks.
edit:wrong word
FLash darky's resurrection Rom ...that error caused by you forget disable lagfix before...
or try Flashing a full rom (3files) with .pit to repartitioning your phone... thick repartition...and thats not "Brick" if you can go download mode...
Come on lets see
I once had the same problem. Same error.message. I searched a lot in xda n finally read something which says to flash Rom with 812 pit and eclair (2.1) with 3 files. After flashing the error message came again so I relished using only pda file. Next time it rebooted normally into home screen. Hope it helps
Sent from my GT-I9000 using XDA App
OK, we're getting somewhere now but not there yet. Flashing the speedmod kernel lets me boot the phone which is further than i have got for a day so thats good, but it still won't recognisse any internal or external SD cards, if you look in the settings section it just shows options to format the sd cards.
I tried changing the filesystem to ex4 as recommended but once it reboots when it says it will go to the recovery menu to debug it just presents me with the option to convert it again as it says the filesystem for /data is RFS still.
Any ideas why it would be doing this and why it won't recognise any of the memory cards? I have also noticed that when i connect the phone to my PC now and tell it to go into Mass storage mode, it shows the drives but says there is no media there! I'm very confused by the whole thing now but at least i do have a phone again of sorts!
So i flashed Darky's resurrection ROM and this is now booting up much as the phone was with the speedmod kernel flashed but i still have the same issue where it won't recognise either the external or internal SD cards so i have no storage space at all. Is it possible i have broken them? I assume at least a bit of the internal card is working or the OS wouldn't be there but why can it not see the other half of the card?
Right, after messing about for far too long i have bitten the bulit and sending it in for repairs, i've read through a couple of posts that seem to say it's the only way to fix it so will see how good the Samsung techicians are!
Thanks for all the help though, you've got me a working phone again, even if i can't save anything on it!
I have an international i9000 that seems to be pretty solidly soft-bricked. I've recently moved back to Canada from the Middle East and was trying to enable to 850 band so I could use it with Bell. I was under the impression that the Bell SGS and the international SGS were basically the same hardware so I flashed (ODIN) a PDA/PHONE/CSC designed for the i9000m. At the time I was on the teamhacksung ICS.
Now, regardless of what I do I always end up in basically the same spot. After my most recent flash through Heimdall, following the first reboot I end up in 3e recovery with the following errors...
---------
E:failed to mount /sdcard (File exists)
E:copy_dbdata_media:Can't mount /sdcard
your storage not prepared yet. please use UI menu for format and reboot actions
E:format_volume: rfs format failed on /dev/block/mmcblk0p2
Data wipe failed
---------
I've been at this for 2 days and tried pretty much everything. Flashed through Odin and Heimdall as well as from recovery off an external SD. I tried 1-click de-brick. I tried to re-partition through ADB. I get various messages in ADB depending on what I'm doing. Sometimes it's I/O errors and sometimes it says "unrecognized disk label".
I can get to recovery and download so it seems like it should be solvable. My impression is that the partition table or structure on the internal SD card has been corrupted.
Sorry if there is already a thread for this with a simple answer, I've been through a ton and couldn't find anything that worked for me. Any suggestions would be appreciated. I'm not an expert in shell but I can follow instructions. Happy to try anything at this point.
Thanks
Exactly the same issue here, so I'll just wait for a solution here.
I think I saw this problems before. Have u backed up all your data? If yes then do this 3 ways below. If you haven't backed up yet, try to do Nandroid backup from recovery mode and restore it later.
Now try this:
1. On recovery mode: wipe data/factory reset, wipe cache, in advance-wipe Dalvik cache.
2. Remove your external sd card ( put it back later if everything's fine ).
3: Set the USB debugging ON, settings-applications-development.
Hope this helps. If it does, please consider 'THANKS' button
At this point it doesn't boot into Android. It was looping for a while but now the boot animation will start, then the screen will go black and the back/options LEDs at the bottom come on. Anything on the phone is long gone after multiple wipes/flashes/etc. I'm not worried about that.
I'm pretty sure it's a problem with the partition on the internal SD. Does anyone know how to reset/repair the partition table and rebuild the partitions from ADB? Why doesn't that happen automatically when I flash from Odin/Heimdall? Isn't that the point of the "partition" toggle?
Or, could I try to convert the file system as if I were moving from a stock ROM to something like CM7 (ie...RFS to EXT4)? Would that recreate the partitions and fix this?
Thanks
Have you tried to flash a stock samsung firmware for your phone (i9000) and re partition using a 512 pit file via Odin? Have a read of the following thread below to get the latest Stock firmware for (i9000).
http://forum.xda-developers.com/showthread.php?t=1102881
Yep, I've tried several of these across froyo/gingerbread and always end up with an unmountable internal SD card. Just for fun I went and picked another one basically at random (JV6 2.3.3) and it flashed as normal and dumped me at recovery with the mounting sd card/storage not prepared error.
Are there really no takers on this? I keep reading that these are un-brickable if they still start up.
This might be worth a try, failing that you might have to take the phone to a Samsung repair agent.
http://forum.xda-developers.com/showthread.php?t=984140
i read about this problem before on darkyrom i think there was a way to bypass corrupt internal sd and use external one go check there its worth a try
Fallen04 said:
This might be worth a try, failing that you might have to take the phone to a Samsung repair agent.
http://forum.xda-developers.com/showthread.php?t=984140
Click to expand...
Click to collapse
Kiaora mate, it's a good thread to try to . Just another thread I found that may help the idea as well:
http://forum.xda-developers.com/showthread.php?t=1442684&highlight=md5+sums
Hope this helps
Hi!
I had the same problem with my i9000. I have moved /data to external SD card and everything is working now (on ICS).
I have created a manual for solving this issue. Please click "helped" and/or ads, if this helped at least a bit.
www youtube com/watch?v=zdMhYYdMB08
Best regards
fteller said:
Hi!
I had the same problem with my i9000. I have moved /data to external SD card and everything is working now (on ICS).
I have created a manual for solving this issue. Please click "helped" and/or ads, if this helped at least a bit.
www youtube com/watch?v=zdMhYYdMB08
Best regards
Click to expand...
Click to collapse
I've the same problem and I've tried everything. Not I'm sure that the internal memory is broken, so I want to use the external sd as internal memory. I'm following your manual but I can't get it to work. I tell you what I've done:
1) I've formated the external sdcard with two partitions: one of 6 GB in vfat format and the other of 8GB in reiserfs. It seems to be ok.
2) I've tried to flash with odin the JVU 2.3.6 version. Here I've some questions: Shall I check re-partition? And apply the PIT file? I've tried all combinations but I still doesn't use the external memory and I get the mmcblk0p2 error...
Any help?
Here I have posted how I have solved my problem of corrupt internal memory. Look at it and I hope someone will help.
This guide install rom to SD Card, but still have question, how to repair internal memory? i`l boot`ed rom from SD Card, but cant see internal memory, use camera, etc. who need internal memory...
Maybe are any app to fix internal memory, when android boot`ed?
In most cases I have met (including Galaxy Tab P1000 and GT-i9003) with internal memory failure or corrupted memory, the only solution is to replace the chip. If you've booted your terminal and can not use the camera or see the internal storage, you have to modify the file vold.fstab according to your android version.
Greetings to all,
I have a Galaxy S GT-I9000 which I bought last year.
I had no problem flashing any firmware with odin and every flash I made was successful.
I never had an external_sd card ever since I bought the phone.
Now my problem started when a couple of months ago I flashed ICS 4.03 from CWM from
an external_sd card.
As strange as it may sound, all apps and media files where installed on the external_sd
card. I found out about this after the phone booted up successfully and by checking the contents
of both the internal_sd & the external_sd cards. I wasnt bothered by this as long as the phone
boots up normaly and storages mount.
Now I wanted to flash XXJW4, I did everything by the book. (i.e factory reset, clear cache, clear delvik)
and flashed successfully.
The phone entered into an endless bootloop.
Taking out external_sd card and booting to recovery 3e results in /sdcard & /data mounting problems
Inserting external_sd card and booting to recovery 3e produces no mounting problems. in fact I can
clear cache and factory reset.
So my guess is that: the phone identifies the external_sd card as internal_sd and mounts it to search
for booting parameters but fails to find it, because the card is formatted and has no os.
Creating three partitions for fat32, ext2 or ext3 or ext4 and a linux-swap and flashing any firmware results
in the phone booting up normally with out any problems.
My question is: how is it possible to change where the phone looks up for boot sectors (If I may use windows terms )
According to this wonderful post h t t p : / / python . ca / nas / log /201204 /by Neil Schemenauer's Web Log
the phone internally has two built in flash memory devices:
- NAND device (8 or 16GB)
- Flash memory for (BML or MTD schemes) used by the ROM
Now the problem might have been created by the ROM's flash memory, it ignore the NAND device
and tries to boot up from the extended memory (external sd) which results in a boot loop if it doesnt
find the OS that's looking for (in our case Android).
ANY ONE PLEASE give me any idea or hypothesis if you like, as to how to go around this problem.
A complete boot up process for the device would be very help full. I understand most Galaxy I9000 phones
are having these problems.... Lets SOLVE THIS
So I'm I the only one having this problem...... STRANGE.!!!!
One week after my first post,... No one had dared to post any idea.
It seems sda developers rarely visit the Q & A.
Any ways I managed to solve the problem, it was a faulty jumper
on the main board.
This thread is closed
I might have a similar issue....some application settings/data etc are being installed on the external card and the "external SD" folder leads to nothing (no files there - while using the emmc folder in the root directory does access the external card. So, it appears the system is messed up (but still working).
Unfortunately, I can't help you solving your problems but I found out that flashing some old stock rom (GingerBread 2.3.6 JW4 or JW7) brings things back to normal - at this stage I'm experimenting with new custom roms and as long as my external card is accessible I'm not bothered if the messed up folders....still, a neat solution would be very much appreciated.
Thank you xelaris for your post,....
In my previous post I had mentioned flashing JW4 and that didn't work.
Installing the ROM on the external_sd card with at least two partitions one ext2 or ext3 or ext4 (for data) and vfat or fat32(for usb storage)
most certainly work. But performance will be reduced dramatically as the external sd requires more time for read/write operations.
Hello all,
I've got a GT-I9000, which have a ugly situation:
- on starting some apps generally break down with errormessage (Maps, Mail.web.de and others
- any change in the system are not persistent (passwords are lost, new Apps can not be installed, Apps can not deleted)
- Changes on internal SDCard are also completely not persistent (nor Deletion or copy files on the storrage, nor formatation)
- complete wipe are also not persistent, but after a new start the smartphone makes a initialisation-Setup (asking for settings Google account and so on), but other settings are still there (background pic and so on)
- Wipe did not work over settings and also not over the CWM recovery
- Flashing did not work for the system. Tryed one file versions, and three file versions with and without 512.pit and repart. But odin (1.85) told everything was fine while flashing
- Kernel and recovery-flashing works without a problem.
- used actual drivers, Kies not running in system (shutdown via taskmanager)
- Downloadmode, recovery works. Access via usb is possible in running system and over CWM, but changes are nor persistent (so it is not possible to flash via CWM, because I can not store data on the SDCard, and I ve actual no external SDCard..
So after searching a lot of forum enrys I can see, that there are some other guys which have the same prolem, but I found no working solution. I think that there are the following possebillities:
- the NAND is brocken in some areas
- the partitions/partition-tables are not working right
- maybe the MFT is brocken...
- motherboard defect
- negative energy from space or aliens lives in the phone
So I'm interested in you thougths, and your ideas. I ve no problem to use Linuxs or windows tools, and it would be absolutley great if someone can told me that there is a posebility to recover the phone (other way of check the ram, partitioning in other ways and so on)
What do you think,
Best regards
Solar Plexus
PS: sorryfor my mistakes and my english, but the used keyboard is poor, and my english is not good
SolarPlexus said:
So I'm interested in you thougths, and your ideas. I ve no problem to use Linuxs or windows tools, and it would be absolutley great if someone can told me that there is a posebility to recover the phone (other way of check the ram, partitioning in other ways and so on)
Click to expand...
Click to collapse
IF its a hardware problem, you need to use a box or JTAG solution to identify the problem, so just try exhausting Software solution, till you are sure its a hardware issue.
visit My Android Collections downgrade your phone to the earliest version, Eclair ( but your combo keys will not work) so you need to flash the fix or try froyo or try the i9000 rescue kit with heimdall or recovery tools to flash
or.
get an 8 gig EXT SD card, partition it as a 2 gig and 6 gig in rfs /vfat format, try flashing the ROM with speedmod kernel for i9000
Thanks at first for your Informations!
xsenman said:
IF its a hardware problem, you need to use a box or JTAG solution to identify the problem, so just try exhausting Software solution, till you are sure its a hardware issue.
Click to expand...
Click to collapse
So I'll retry at first the Software-way. But nevertheless I'm thinking about to buy also a JIG, because it seems that I flash more and more, and then it will be a good idea to have a emergency-tool to reach the download-screen. I've read sometimes that this stickers clean also the counter and triangle stuff, but I'm ot sure if this will also work for my new S3? (sorry, is a little of topic)...
xsenman said:
visit My Android Collections downgrade your phone to the earliest version, Eclair ( but your combo keys will not work) so you need to flash the fix or try froyo or try the i9000 rescue kit with heimdall or recovery tools to flash
Click to expand...
Click to collapse
OK, I'll try the downgrade and also the rescue-kit at weekend. We will see...
xsenman said:
get an 8 gig EXT SD card, partition it as a 2 gig and 6 gig in rfs /vfat format, try flashing the ROM with speedmod kernel for i9000
Click to expand...
Click to collapse
Here I'm a little puzzled. If I understand it right I have to format the SD-Card with two partitions, and then I flash the Rom on it?? I've never heard that this is possible. If yes, Odin recognize this automatically? Or does this only mean, that the I9000 have then a external Storrage which may improve the flash-process for CWM?
Thanks, and Best regards,
SolarPlexus
SolarPlexus said:
Here I'm a little puzzled. If I understand it right I have to format the SD-Card with two partitions, and then I flash the Rom on it?? I've never heard that this is possible. If yes, Odin recognize this automatically? Or does this only mean, that the I9000 have then a external Storrage which may improve the flash-process for CWM?
Click to expand...
Click to collapse
Nope, what I am looking at is, its possible your problems could be due to internal SD card corruption ( hence trying to isolate it using your External SD card to perform as its internal SD card) , as such by using the external SD card, with speedmod kernel, which is capable of reading that as your Internal SD card. In other words its like switching the cards and flashing the ROM. Read this
BTW this will work when Internal SD card totally corrupted and I am not sure it will work in partial corruption ( as you indicate) but worth giving it a try.
also look at this
yup, usb jig will work for S3 too, and triangle away works only for s2 and up, and S does not have a flash counter.
OK, sounds as we have maybe a way... SDCard switch is something what comes not in my mind, so now I have a little hope
So as I can do that only later in the weekend, I'll post my tests later.
Thanks
SP
Hello,
the external SD-Card could do the trick. I've startet in that way, format the ext-sd-card in two partitions (one reiserfs and one Vfat) and flash the modified firmware which was found in your link. Now I can start the Smartphone. but I have no acces to the SD-Card, but I can see, that the problem seems to be the internal SD-Card.
So now I'll try to use a custom-rom (maybe slim 4.1.2) and try to modify it in that way which was described in your link. If I will succseed, I'll maybe upload the package, or try to store it in the slimrom-area or whatever
By the way:
with speedmod kernel, which is capable of reading that as your Internal SD card
Click to expand...
Click to collapse
I did not find a option in the speedmodkernel for switching the internal and external SD-Card (K17). But I've try to find that while I have no ext-SD-Card in the phone, so maybe the option was hidden...
Thanks up to now, and best regards,
SP
There is no switch in speedmod kernels but it is designed to read both rfs and ext2/4 formats and partitions as such it will automatically read the available partitions as its internal SD card. And its best to use ICS or Jbean custom ROMs, when Internal SD card is unavailable due to any reason.
good luck on trials and do upload whatever here or on a new thread that may help others solve such issues.
Ok, first time posting here, so pardon me for any stupidity. I need help, been using unofficial slimkat rom on s3 mini, was trying an app that uses part of your external SD as RAM, turns out my Kernel doesnt have the swap feature, tried to install another kernel, the phone got stuck in a boot loop shows this "unable to mount /modemfs" in recovery whenever I try to do anything, also there was unable to mount sdcard and unable to mount data, but those got fixed by too many formats and wipes and flashing some PIT and Modem files though Odin, have no idea what to do, can someone help please ?
kfatah22 said:
Ok, first time posting here, so pardon me for any stupidity. I need help, been using unofficial slimkat rom on s3 mini, was trying an app that uses part of your external SD as RAM, turns out my Kernel doesnt have the swap feature, tried to install another kernel, the phone got stuck in a boot loop shows this "unable to mount /modemfs" in recovery whenever I try to do anything, also there was unable to mount sdcard and unable to mount data, but those got fixed by too many formats and wipes and flashing some PIT and Modem files though Odin, have no idea what to do, can someone help please ?
Click to expand...
Click to collapse
Also new to android, but I know linux well
modemfs seems like another partition on the internal storage
since you reflashed this it might be in the wrong format / filesystem
my phone reports this entry in the fstab (mine is ext4 format)
/dev/block/mmcblk0p12 /modemfs ext4 noatime,nosuid,nodev,journal_async_commit,errors=panic wait,check
you need to flash one in the correct filesystem, maybe try one of these from http://forum.xda-developers.com/showthread.php?t=2526831 not sure if these are odin compatible
if all else fails you can download the stock rom from http://www.sammobile.com/firmwares/
thanks for your help
thanks for replying, and sorry for the late answer.
I will try the link you sent me, but there are a couple of stuff i failed to mention last time, before showing me that it used to show failed to mount /data and /sdcard .. I think the internal sdcard is damaged because I did flash the stock rom, the phone boots without the ability to install any apps, no network, yellow text is displayed on the screen saying stuff like PDA and Csc .. etc, inside settings baseband is XXXXXX. also when I connect the phone to my windows ... the internal is empty with incorrect size and you cant create or copy folders in it and was not able to formate it in windows or linux .. even recovery was not able to formate it.
update: I did try one of the files, but it is the same unfortunately .. I think its the sdcard issue .. but that is ofcourse my humble opinion. any other solutions ??
kfatah22 said:
thanks for replying, and sorry for the late answer.
I will try the link you sent me, but there are a couple of stuff i failed to mention last time, before showing me that it used to show failed to mount /data and /sdcard .. I think the internal sdcard is damaged because I did flash the stock rom, the phone boots without the ability to install any apps, no network, yellow text is displayed on the screen saying stuff like PDA and Csc .. etc, inside settings baseband is XXXXXX. also when I connect the phone to my windows ... the internal is empty with incorrect size and you cant create or copy folders in it and was not able to formate it in windows or linux .. even recovery was not able to formate it.
update: I did try one of the files, but it is the same unfortunately .. I think its the sdcard issue .. but that is ofcourse my humble opinion. any other solutions ??
Click to expand...
Click to collapse
I seriously doubt that the internal memory itself is damaged. If you were able to flash anything then it still works.
Or are you referring to the removable SD card? Via USB connection none of the storage size is also not reported correctly on my phone.
What recovery do you have installed?
1. Firstly you should get the phone working again and work off WIFI.
I am not sure if the stock rom installer only copies files or if it dd the whole image (incl filesystem format).
Your IMEI is stored on a filesystem and mounted on /efs - You should not remove / format this filesystem !!! Do not even touch it!
When you installed the custom rom intially you probably formatted in the f2fs file system? I would install the custom rom again, and in the install menu format "data" and "swap" to ext4 filesystem just to be sure.
Flash back to stock make sure about model and baseband
The phone should boot up and at least be able to install apps via WIFI.
I installed the app "ssh/sftp server" and then login via ssh to browse and inspect the phone.
2. Step two is fixing the baseband (not having any network signal)
2.1 What is your original baseband?
2.2 What phone variant do you have 8190/8190L/8190N? If you flash a different one to your phone it will not work.
I mean the internal sdcard, cause previously it showed unable to mount /sdcard, right now I have the stock rom, each time the phone reboots, it resets itself again, all my changes are gone, yes I can turn on wifi but no apps are to be installed, using pc can't copy anything to the internal storage (I can only copy on my external card which I use to flash) right now I have TWRP and I tried CWM as well. as for installing a custom ROM, it didn't work, the phone doesnt get past the s3 mini logo, only the stock rom passes through, my phone is 8190 and I have no clue what is the original baseband um really sorry I am a total noob. I will try again to flash the customer rom using Odin and will get back to you.
thanks so much for going through the trouble.
kfatah22 said:
I mean the internal sdcard, cause previously it showed unable to mount /sdcard, right now I have the stock rom, each time the phone reboots, it resets itself again, all my changes are gone, yes I can turn on wifi but no apps are to be installed, using pc can't copy anything to the internal storage (I can only copy on my external card which I use to flash) right now I have TWRP and I tried CWM as well. as for installing a custom ROM, it didn't work, the phone doesnt get past the s3 mini logo, only the stock rom passes through, my phone is 8190 and I have no clue what is the original baseband um really sorry I am a total noob. I will try again to flash the customer rom using Odin and will get back to you.
thanks so much for going through the trouble.
Click to expand...
Click to collapse
Is
The baseband is linked to your country, it specifies the frequencies that you are allowed to use to communicate with the cellphone network. So If I know what country you are from we might be able to locate the correct Stock ROM on SanMobile. You might be flashing a wrong stock rom to start off with.
What country do you live in and what network operator?
Are you using ext4 filesystem for data and swap?
I personally used twrp 2.8.0. I think this is the way to go.
Do you know Linux?